Used Envelope Feeder for sale (2,534)

Condition: new, Wheel diameter 120 mm Wheel width 60 mm Ksdpjfdl Evefx Ahbsdu Wheel diametre hole 35 mm

Year of construction: 2014, condition: excellent (used), Automatic Postbox traying system for envelope inserting systems. This SIMA 220 was connected to a Buhrs BB700 inserting systems, therefore it is blue. Installed in 2015 and just in use for 16 months! More pictures available on request! Description: Kdedpfx Aod Etadjhbsu Adjustable in height 600 mm up to 900 mm. Gathering section – with buffer for post boxen Automatic fillingstation for postboxes Automatic change of postboxes. Max 10 Postboxen can be in feeder Touchscreen – simple, and user-friendly user interface Complete with connection from envelope inserter - connection with all inserters possible! Format max.: 180mm x 285mm Format min.: 90mm x 145mm Speed: up to 20.000 envelopes per hour Envelope thickness max.: 8 mm Postbox change-over time: ca. 1,8 sec (max 2000 boxes per hour) Post boxes: Deutsche Post, Postcon, Schweizer Post, Oesterreichische Post, Belgische Post, Hollaendische Post, USPS Trays, Pin Boxen. Electrical connection: 16A, 400/230V, 4kW Pressure air: 6bar, 200l/min Connection: To all inserting systems possible The sima Automatic Mail Delivery lines up with any inserter and automates the presorting and letter tray preparation processes. The delivery checks for open flaps, non-readable addresses, and IMB Barcodes then automatically rejects any letter that should not be delivered. Various reading systems are available for the sima, from simple print mark readers up to a server based OCR/IMB reading system connected to the Digital Front End. Our patented collection unit safely stacks the envelopes individually- without contacting each othermaking twisting or interleaving almost impossible. The envelope stack is quickly pressed before filling the letter trays in accordance with USPS regulations (DMM). The exchange of letter trays occurs automatically with an exchange speed of up to 1,800 boxes/h (2.0 sec). The tray exchange unit can handle MM and EMM letter trays. A unique feature is its ability to intermix one and two foot letter trays depending to the presorting need. As an option, a postcode label printer can be integrated into the sima, which applies a tray label to the letter tray. The filled letter trays are temporarily stored on a large buffer section. The Sequence Repair System (SRS), which marks or separates mails that do not belong to the actual mail sequence, comes standard on this machine. The sima can instruct the operator what to do with the marked or separated mail. This SRS enables a constant production speed even when sequence problems ap

Year of construction: 2014, condition: excellent (used), Automatic Postbox traying system for envelope inserting systems. This SIMA 220 was connected to a Buhrs BB700 inserting systems, therefore it is blue. Installed in 2015 and just in use for 16 months! More pictures available on request! Description: Adjustable in height 600 mm up to 900 mm. Gathering section – with buffer for post boxen Automatic fillingstation for postboxes Automatic change of postboxes. Max 10 Postboxen can be in feeder Touchscreen – simple, and user-friendly user interface Complete with connection from envelope inserter - connection with all inserters possible! Format max.: 180mm x 285mm Format min.: 90mm x 145mm Speed: up to 20.000 envelopes per hour Envelope thickness max.: 8 mm Postbox change-over time: ca. 1,8 sec (max 2000 boxes per hour) Post boxes: Deutsche Post, Postcon, Schweizer Post, Oesterreichische Post, Belgische Post, Hollaendische Post, USPS Trays, Pin Boxen. Electrical connection: 16A, 400/230V, 4kW Kdedpfx Ahod Etagebju Pressure air: 6bar, 200l/min Connection: To all inserting systems possible The sima Automatic Mail Delivery lines up with any inserter and automates the presorting and letter tray preparation processes. The delivery checks for open flaps, non-readable addresses, and IMB Barcodes then automatically rejects any letter that should not be delivered. Various reading systems are available for the sima, from simple print mark readers up to a server based OCR/IMB reading system connected to the Digital Front End. Our patented collection unit safely stacks the envelopes individually- without contacting each othermaking twisting or interleaving almost impossible. The envelope stack is quickly pressed before filling the letter trays in accordance with USPS regulations (DMM). The exchange of letter trays occurs automatically with an exchange speed of up to 1,800 boxes/h (2.0 sec). The tray exchange unit can handle MM and EMM letter trays. A unique feature is its ability to intermix one and two foot letter trays depending to the presorting need. As an option, a postcode label printer can be integrated into the sima, which applies a tray label to the letter tray. The filled letter trays are temporarily stored on a large buffer section. The Sequence Repair System (SRS), which marks or separates mails that do not belong to the actual mail sequence, comes standard on this machine. The sima can instruct the operator what to do with the marked or separated mail. This SRS enables a constant production speed even when sequence problems ap

Year of construction: 2015, condition: excellent (used), functionality: fully functional, - Year of manufacture: 2015 - Weight: 190 kg - Overall length (with roller conveyors): 5,500 mm - Width: 1,200 mm - Height: 2,050 mm Other dimensions: Roller conveyor width: 360 mm Kdsdpfx Ahsy Rx Smebsu The machine is in very good technical condition. The machine can be inspected and tested in Poland at the following address: 33-350 Piwniczna Zdrój A video demonstrating the machine in operation is available. Delivery possible.

Condition: excellent (used), Year of construction: 2004, Maier ML 26 E CNC lathe TECHNICAL DATA Number of axes: 11 Spindle bore: 32 mm Path speed: 32 m/min Control: Maier Pro GE-Fanuc Guide bush: 451.001 Main spindle Clearance: 26 mm C-axis: Yes Mechanical indexing 5°: Yes Headstock stroke: 220 m Main spindle, speed: 0 - 6000 rpm Power: 3.7 kW / 5.5 kW (7.5 kW) Collet chuck: 161E Counter spindle Clearance: 26 mm C-axis: Yes Mechanical indexing 5°: Yes Max. travel (Z): 220 mm Counter spindle, speed: 0 - 6000 rpm Main spindle, power: 1.1 kW Collet chuck: 161E Cross machining Kjdpfx Aou S Rivjhbedu Basic holder for turning rings 5 pcs. 16 x 16: Yes Number of driven tools: 4 Power of the driven tools: 0.5 kW Back machining Drive power: 0.5 kW Number of tools: 4 of which driven tools: 4 Collets: ER16 Tool turret Number of tools: 16 Number of driven tools: 8 Drive power: 0.5 kW C-axis: 360 ° Z-axis: 175 mm X-axis: 200 mm Collets: ER16 SCOPE OF OFFER U.A: (list not exhaustive): Maier ML 26 E CNC lathe Oil mist separator transformer Chip conveyor High pressure pump / belt filter system Fire extinguishing system LNS bar feeder Complete operating documentation Exact scope of offer according to photo gallery No responsibility is taken for the accuracy, completeness and timeliness of the information

Condition: excellent (used), Year of construction: 2008, Nakamura Super Mill WY-250 CNC Lathe Capacity: Max. turning diameter: 215 mm Standard turning diameter: 150 mm Distance between centers: max. 870 mm / min. 250 mm Max. turning length: 580 mm Bar capacity left/right: L: 65 mm R: 51 mm Chuck size: left: 210 mm (8″) right: 165 mm (6″) Axis travel: Slide travel (X1 / X2): 160.5 mm / 160 mm Slide travel (Z1 / Z2): 580 / 580 mm Slide travel (Y1 / Y2): ±50 mm / -50 mm, +20 mm Slide travel (B2 axis): 620 mm Rapid traverse X1 / X2: 18 m/min Rapid traverse Z1 / Z2: 36 m/min Rapid traverse B2 axis: 36 m/min Rapid traverse Y1 / Y2: 10 m/min Main and sub spindle: Spindle speed: 4500 rpm / 5000 rpm Speed range: stepless / stepless Spindle nose: A2-6 / A2-5 Spindle bore: 80 mm / 63 mm Front bearing inner diameter: 110 mm / 90 mm Drawtube diameter: 66 mm / 52 mm C-axes: Minimum input unit: 0.001° Minimum command increment: 0.001° Max. indexing speed: 600 rpm Feed speed: 1–4800 mm/min C-axis lock: disc brake C-axis positioning time: 1.5 s Upper/lower turret: Turret type: 12-position drum turret Number of tool stations: 48 (2 x 24) Square tool size: 25 mm Kjdpfxsy Ipp Rs Ahbsdu Round shank tool size: 32 mm Driven tools: Drive system: single drive Spindle speed: 6000 rpm / 3600 rpm Speed range: stepless Number of driven tool stations: 12 × 2 Collet size: ER32 Straight toolholder size: 2 mm – 20 mm Cross toolholder size: 2 mm – 20 mm Drive power and torque: Left spindle: 18.5 / 11 kW 225 / 185 Nm Right spindle: 15 / 11 kW 120 / 120 Nm Tool spindles: 7.5 / 3.7 kW 40 / 16 Nm General: Machine height: 2395 mm (without extraction) Footprint: 4436 mm × 2674 mm / 4905 mm × 3331 mm Machine weight: 14,000 kg Scope of supply as shown in photo gallery includes, among others: Nakamura lathe, toolholders (driven and non-driven), collets, complete operating documentation, portal loader and loading robot, Iemca Master 880 Verso bar feeder, peripheral devices (chip conveyor, transformer, oil mist separator, etc.) No guarantee is given for the correctness, completeness or currentness of the information provided.

Condition: as good as new (ex-display), Year of construction: 2026, - NEW - Manufacturer: Ganner Gannomat Type: SELEKTA 253 220 V, 1 phase, 50 Hz complete in standard version with: - Fully automatic electronic control with program selector switch COILING-GLUING-INSERTING - Dowel feed via electronic vibratory feeder with potentiometer for stepless adjustment of the dowel feed rate - Automatic dowel diameter and dowel length control with Auto-DL-Select system (automatic ejection of incorrect dowel lengths +/- 5 mm into the collection container) - Closed gluing system with 6 bar glue pressure via glue nozzle for glues with a viscosity of 150 to 350 mPas - Stepless electronic glue quantity adjustment with potentiometer via time preselection through electronic control - Selector switch GLUE/WATER for flushing/cleaning the gluing system with EasyClean function button (automatic cleaning program for Kdedpfxsdwi Rke Ahbsu glue hose and glue nozzle via spray funnel and dirty water collection container) - Control light for glue residue level indicator in the glue container - 1 stainless steel container for 5 kg of glue and 1 stainless steel container for 5 l of water for flushing/cleaning - 4 rollers for moving the machine including 1 gun for dowels Ø 8 mm, dowel length 25 - 40 mm Insertion allowance 7 - 20 mm Air connection: 6 bar Price ex warehouse 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, operating hours: 10 h, functionality: fully functional, For sale: EWM Tetrix XQ 400 Puls AC/DC W Expert welding machine including accessories (TIG Speed continuous drive 45 coldwire wire feeder/ABITIG 500W MT 4m torch/others). The system was purchased as an add-on for a BOKI linear welding automaton, intended for longitudinal welding of aluminium tubes/sheets. Welding was successful; however, the project was ultimately not realized. The equipment has run for approx. 20 hours = like new condition. Original price: CZK 354,800. Kedjy Hpamopfx Ahbjdu

Condition: good (used), Year of construction: 2002, functionality: fully functional, spindle speed (min.): 3,200 rpm, total height: 1,700 mm, total length: 2,700 mm, total width: 1,900 mm, overall weight: 6,500 kg, Equipment: documentation/manual, rotational speed infinitely variable, OKUMA ES L II-M Year 2002 Kedpfx Ahjyna Uisbodu A small, very compact lathe with extensive capabilities. Control U-10L, parts catcher, touchsetter, V12 turret VDI 30— all driven positions, manual tailstock, chip conveyor, coolant pump, bar feeder Samsys MUS-3000 year 2007, including equipment, SMW chuck KNCS-N210-52, package with jaws and 24 tools optionally available.

Condition: good (used), Superfax PF-460 Automatic Folding Machine Made in Japan. Perfect condition, ready to use. Kjdpfx Aez Rk I Nohbedu This model is very well-equipped, with automatic cassette adjustment, automatic paper size detection, and an automatic feeder. Technical data: Paper size: min: 91×128 mm max: 315×432 mm A6-A3 Weight: 45-160g (max. up to 230g when half-folding) Power supply: 230V Weight: 34kg Detailed specifications: – Automatic folding position setting for the six most popular folds (half-fold, quarter-fold, „Z”, „C”, „altar” fold) – Automatic paper size recognition for six formats (A3, B4, A4, B5, A5, B6) Paper folding speed adjustable from 3,300 to 10,000 sheets per hour Shelf for folded documents Automatic paper feeding system Smooth paper flow thanks to the conveyor belt Folding counter, batch countdown, total count, etc. Automatic stop with a sound signal when all sheets are folded A complex paper jam is signaled by an appropriate sound and a LED indicator.

Condition: good (used), Year of construction: 2005, 1 x used gatherer Manufacturer: Müller Martini Model: Prima S Kdjdpoz Rv S Tjfx Ahbsu Year of manufacture: 2005 Condition: good, in production, can be inspected Configuration: 6 x stations with undercarriage 4 x standard feeders 1 x folding feeder 1 x card gluing feeder 1 x stitching unit with 2 stitching heads HK75 1 x three-knife trimmer (without trimming cut) 1 x Semko thickness measurement 1 x automatic bundle delivery system Palamides delta 703

Condition: used, Year of construction: 2006, Technical details: voltage: 380 V number of stations: 1 Stück total power requirement: ca. 2,0 kW weight of the machine approx.: 160 kg dimensions of machine: 0,85x0,85x1,0 m Vibratiory bowl feeder Washing unit (vibration technique) with heating: - applicable for cleaning of small parts - drum size 300mm, height 150mm - ejection automatically via screw guide - tank:560x460x280mm, filling approx. 60 liter, with filling display Kjdpfsu Nu Imex Ahbsdu - equipped with rotary waste separator - table: 800x600mm, table height 640mm, catching basin 750x550mm *

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, We are pleased to offer you the following machine, subject to its availability: PETRATTO METRO SD 78 - 2007 Equipment: • FEEDER SECTION: o Friction feeder for thicker paper o Flat pile feeder for thinner paper (envelopes, etc.) • Metro 78 FOLDING AND GLUING UNIT - Metro transport system with 4 programmable outputs - Small plough folder, left and right - Large plough folder, left and right - Folding buckle plate - Folding buckle plate for thinner papers - Turning device - Stream belt delivery with pressure roller • Double-sided adhesive tape applicators x 3 Refurbished, with new rollers, bearings, and belts Kjdpfxjy Eda So Ahbjdu AVAILABLE: IMMEDIATELY LOCATION: Belgrade, Serbia Installed in Belgrade, Serbia. Testing possible.

Condition: excellent (used), Year of construction: 2012, Description Specification Manufacturer TATUNG-OKUMA Model GENOS L300E-M Manufacturing Date 30 January 2012 Serial Number PEA258 CNC Control OKUMA OSP P200LA-R MCS3 Machine Type CNC Turning Centre with Driven Tools CE Declaration of Conformity Available Tool Turret 12 Stations Tailstock Included Parts Catcher Listed in machine documentation Bar Feeder Interface Listed in machine documentation 2. Machining Capacity Description Specification Maximum Turning Diameter Ø300 mm Maximum Turning Length 1,060 mm Maximum Swing Over Bed Ø520 mm X-Axis Travel 235 mm Kdedpfxez Nyvte Ahbeu Z-Axis Travel 1,144 mm Main Spindle Speed 30–3,000 rpm Spindle Nose A2-8 Main Spindle Motor Power 11 / 7.5 kW (30 min / continuous) 3. Turret and Driven Tools Description Specification Tool Turret 12 Stations Turret Type M-V12 Driven Tool Capability Yes Driven Tool Speed 45–4,500 rpm Driven Tool Motor Power 7 / 3.3 kW C-Axis 360° C-Axis Indexing Resolution 0.001° 4. Equipment and Features - OKUMA OSP P200LA-R CNC control system - 12-station tool turret - Driven tooling capability for milling and drilling operations - C-axis positioning - Tailstock - Parts catcher (indicated in documentation)

Condition: used, TOX Ksdszdtffspfx Ahbjdu Type: TZ-VSN TOX – Full-Punch Riveting System The full-punch rivet initially separates all joining partners and then pushes the punched-out section out of the joining point. With its innovative technology for full-punch rivets, TOX PRESSOTECHNIK, the specialist for sheet metal joining, is expanding its range of products and services to include a future-oriented process. Full-punch riveting offers an additional mechanical sheet metal connection that is of great importance for lightweight construction and the joining of hybrid parts and assemblies. The rivet feeders, tongs, and tool holders are also designed to be so universal that full-punch rivets with diameters of 4.0 mm and lengths between 3.3 and 8.1 mm, as well as full-punch rivets with diameters of 5.0 mm and lengths between 3.9 and 9.0 mm, can be processed flexibly with both TOX hand tongs and TOX robot tongs. Press force: 55 kN Total stroke: 140 mm Rivet type: Diameter 5 x 4.6 Connection values Power: 3.4 kW Mains connection: 400/15/50-60 V/A/Hz Speed: 200 mm/s Mains type: 3P+N+PE Control voltage: 24 V DC Pre-fuse: 25 A Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2019, BEAM MODULO 400 Year Mfg 2019 Siemens Control Kdodpfx Aszvlhpshbou Build Volume: Approximately 650 × 400 × 400 mm (or roughly 600 × 400 × 400 mm operational) with continuous 5-axis motion kinematics Laser Source: Ytterbium fiber laser options ranging from 500 W up to 2 kW Deposition Heads/Nozzles: Supports an automatic tool changer to swap between different heads (e.g., the 10Vx for fine precision down to 0.1 mm and the 24Vx for higher deposition rates) without stopping production Powder Delivery: Equipped with a vibrating multi-hopper powder feeder system capable of managing up to 4 or 5 separate material feed options

Condition: new, Year of construction: 2026, functionality: fully functional, working width: 1,800 mm, stack height: 1,500 mm, Think Green, Box On Demand, pay attention to your CO2 footprint. The machine for processing continuous corrugated board, listed here, belongs to the series of statically operating machines, meaning that the operations performed across the width of the machine are carried out on the stationary cardboard. The machine is designed for high productivity. The maximum working width of the cardboard is 1,800 mm. All tool settings are performed automatically. 1) Main machine body (cardboard cutting machine): Linear cross-cutting group for head/foot cuts and cross cuts on the cardboard. Kdodpfx Aez Tdaqehbou Linear cross-scoring group for cross scoring on the cardboard. (Delivered as a cross scorer, cross scorer with perforation option) 8 sets of longitudinal scoring groups from above for longitudinal scoring on the cardboard. 8 sets of longitudinal cutting groups for performing longitudinal cuts. 2) Cardboard changer, 4-cassette feeder A motorized cardboard changer, operated with a lifting shaft, is used to feed the cardboard into the cardboard infeed of the main machine body, using 4 individual cassettes. Each cassette is capable of accommodating a web width of raw material up to a maximum of 1,800 mm and automatically feeding it to the main machine body on request from the machine control. 3) Cardboard magazines, 4-fold 4 cardboard magazines provide and feed the raw cardboard to the processing machine. Stack height of continuous corrugated board up to max. 1,500 mm possible. 4) Control cabinet, control system, electronics: Contains all the components required to operate and control the system. The control cabinet components are based on Siemens.

Condition: used, Year of construction: 2015, turning diameter max. 500 mm turning length 800 mm control sl Operate 3G ShopTurn Siemens swing diameter 500 mm distance between spindles 1.020 mm turning speed range - main spindle max. 5.000 min/-1 power capacity - main spindel 25 / 34 kW max. Torque 280 / 380 Nm spindle head 170h5 spindle diameter in front bearing 130 mm spindle bore 87 mm C-Axis 0,001 ° tool taper HSK 63 A number of toolpositions 80 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 120 mm max. tool weight 12 kg max. tool length 300 mm Speed Milling Spindle max. 12.000 min/-1 power capacity - milling spindle 19 / 22 kW Torque 85 / 100 Nm tool taper HSK 63 A B-Axis +/- 110 ° x-axis -10 ... +490 mm y-axis +/- 100 mm z-axis 1: 845 mm z-axis 2: 600 mm z-axis 3: 800 mm Spindle speed range subspindle max. 6.000 min/-1 power capacity - Sub spindle 20 / 27 kW bar material dia. 51 mm spindle bore diameter 73 mm Kdjdpfx Ahoz S Nygjbou spindle diameter in front bearing 100 mm C-Axis 0,001 ° total power requirement 85 kVA weight of the machine ca. 10,0 t dimensions of the machine ca. 7,0 x 2,9 x 2,6 m CNC - Turning- and Millingcenter DMG MORI - CTX beta 800 TC V6 - 5-axis simultaneous machining - Main and counter-spindle - Swivel-type milling spindle - ShopTurn - Off-center turning and milling - Multi-thread cycle - Program state control - Tool sorting cycle - Easy Tool Monitor for Siemens control system - Chuck flushing system for main spindle - Chuck flushing system for counter-spindle - Differential pressure clamping - Coolant supply through the counter-spindle - Bar machining package for CTX beta (77 mm capacity) Workpiece the-take-off device (left side) Hydraulic hollow clamping system 4-color signal tower Interface for bar feeder or bar magazine - In-process workpiece measuring system (Renishaw) - Safety window cleaning system - Coolant spray gun

Condition: excellent (used), For sale: SEW-EURODRIVE WF20 DT63L4/B03/Z geared motor with a three-phase motor rated at 0.25 kW and a 400 V AC electromagnetic brake. The unit is fully functional, tested, and ready for operation. Its technical and visual condition is very good, with normal signs of use. The robust worm gear ensures quiet operation and high torque, making this geared motor ideal for conveyors, feeders, production machines, and other industrial applications. Technical data: Manufacturer: SEW-EURODRIVE Model: WF20 DT63L4/B03/Z Power: 0.25 kW Output speed: 47 rpm Kdedpfx Ajz Snmashbou Torque: 34 Nm Gear ratio: 27.50:1 Power supply: 230/400 V, 50 Hz Protection class: IP54 Insulation class: F Brake: 400 V AC, 3.2 Nm Weight: 11.09 kg Country of manufacture: Germany

Condition: excellent (used), For sale: SEW-EURODRIVE WA20/TDT63L4/B03 geared motor with a three-phase electric motor and integrated brake. The unit is used, fully functional, and ready for operation. Its visual condition is good, with normal signs of wear and tear resulting from use. It is ideally suited for driving conveyors, feeders, industrial machines, and production lines. Technical data: Manufacturer: SEW-EURODRIVE Type: WA20/TDT63L4/B03 Kdedpfxoz Snmye Ahbsu Power: 0.25 kW Power supply: 3×230Δ / 400Y V, 50 Hz Motor speed: 1300 rpm Output speed: 33 rpm Gear ratio: i = 39.00 Output torque: 41 Nm Current: 1.20 / 0.69 A Protection class: IP54 Insulation class: B Operating mode: S1 Brake: 230 V AC, braking torque 3.2 Nm Weight: 9.6 kg Lubricant: SEW PG460 (synthetic oil)

Condition: excellent (used), For sale: a Lenze GST04-2MVBR-071C32 geared motor with a three-phase Lenze MDEMA1M071-32 motor, rated at 0.37 kW. The unit is used, fully functional, and ready for operation. Its technical condition is very good, with normal signs of wear resulting from operation. The robust cylindrical gearbox is suitable for driving conveyors, feeders, production machines, and other industrial applications. Technical specifications: Manufacturer: Lenze Gearbox model: GST04-2MVBR-071C32 Motor type: MDEMA1M071-32 Power: 0.37 kW Power supply: 3×230/400 V, 50 Hz Ksdpfx Ahsz Snndebjdu Motor speed: 1410 rpm Output speed: 112.2 rpm Gear ratio: i = 12.57 Output torque: 31 Nm Protection class: IP55 Insulation class: F

Condition: excellent (used), For sale: SEW-EURODRIVE R40DT71C2BMG/Z geared motor with a three-phase electric motor and integrated brake. The unit is fully functional, tested, and ready for operation. The technical and visual condition is good – normal signs of use resulting from operation are visible. This robust geared motor is ideally suited for driving industrial machinery, conveyors, feeders, mixers, and production lines. Ksdez Snkxjpfx Ahbedu Technical specifications: Manufacturer: SEW-EURODRIVE Type: R40DT71C2BMG/Z Motor power: 0.37 kW Motor speed: 2700 rpm Output speed: 43 rpm Power supply: 230 V Δ / 400 V Y Frequency: 50 Hz Current: 1.65 / 0.96 A Cos φ: 0.91 Protection class: IP54 Insulation class: F Brake: 400 V AC Brake torque: 2.5 Nm Mounting position: IM B8 Weight: 19.24 kg Gear lubrication: Mineral oil CLP220 Country of manufacture: Germany

Condition: new, Technische Daten: fly wheel DM 800 mm Max. cutting height 400 mm Max. max cutting width 780 mm tabel dimensions 580 x 810 mm tildable table 15 Grad Max. saw blade dimension 80 x 0,8 mm saw blade length 5380 - 5530 mm motor 11,0 kW, 400 V, 50 Hz suction 2 x 100 mm fly wheel speed 680 U/ min suction DM 1 x DM 100 mm & 2 x DM 120 mm compressed air 6 - 8 bar machine weight: ca. 850 kg machine dimensions L x B X H 1550 x 950 x 2500 mm welded steel structure, fully closed pneumatic brake table in cast iron upper & lower saw blade guide star triangle switch emergency push button telescopic saw blade guard/ guide work table tillable 20 deg. saw blade cooling/ cleaning device with diesel tank saw blade tension indicator cleaning brush for fly wheels solid work piece fence cast iron fly wheels motor circuit protection switch CE CENTAURO Model RVP200 feeder roller height 160 mm Kdsdjby U Dpepfx Ahbsu work piece fence with rollers height 160 mm var. feed speed 1 - 21 m/ min pneumatic opening / closing of feeder Max distance saw blade - feeder approx 220 mm Max. distance saw blade - work piece fenceapprox . 200 mm CE

Condition: used, 3D systems Type: DT60 Printing volume: 600 x 450 x 450 mm External dimensions: 1265 x 780 x 1725 mm Precision in the Z-axis: 1.25 microns Precision in the X and Y axes: 7.5 microns Max. extruder temperature: 500 °C Max. build chamber temperature: 120 °C Nozzle diameter: 0.6 mm Other available Nozzle diameters: 0.2 / 0.4 / 0.2 mm Thermal barrier made of titanium Two independent extruders Heated filament feed 4 print modes: SINGLE, DUAL, TWIN, REFLEX 220 - 240 V, 50-60 Hz Maximum power consumption: 3 kW/h 7" LCD touchscreen Remote monitoring Industry 4.0 compatible: WiFi, Ethernet, HotSpot, USB MMS system - Modular Maintenance System Dual filament loading Automatic filament change Kjdpfx Aozd Tugjhbjdu Heated feeder Jam detection Sensor for detecting the end of the filament Print recovery system Liquid cooling Double-hardened glass Base fixed by vacuum High printing speed Positioning controlled via encoder Condition: used Scope of delivery: (See pictures) (Sale ex warehouse!) (Subject to changes and errors in the technical data, specifications are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 1998, functionality: fully functional, Equipment: documentation/manual, Colchester Tornado Turning Center Kdedpfx Asz S U Euehbeu 3 Axes: X, Z, Y Model: Tornado 80 CNC: GE Fanuc Series 21i-T Year: 1998 Tornado Bar Feeder Colchester Model: MBF 1000