Used Engine Test Bench for sale (29,190)

Condition: excellent (used), mileage: 84,000 km, power: 3,244 kW (4,410.61 HP), first registration: 04/2008, fuel type: diesel, axle configuration: 4x4, fuel: diesel, gearing type: automatic, emission class: euro5, suspension: steel, Year of construction: 2008, Equipment: ABS, air conditioning, all wheel drive, differential lock, = Additional options and accessories = - Leaf spring suspension - Electric windows - Air-suspended seats - Air horn - Rotating beacon - Power take-off (PTO) = Remarks = 4x4 6000-liter water tank Side pump 3000 liters/min Winch = Further information = General information Cab: double Technical information Number of cylinders: 6 Drivetrain AdBlue system: Yes Axle configuration Suspension: leaf spring suspension Front axle: differential lock; steered; tire tread left: 80%; tire tread right: 80%; reduction: hub reduction axles Rear axle: differential lock; tire tread left: 80%; tire tread right: 80%; reduction: hub reduction axles Isdpfxjx Hilcs Affjik Dimensions and weights Gross vehicle weight (GVW): 19,000 kg Dimensions (L x W x H): 750 x 248 x 330 cm Condition Technical condition: very good Optical condition: very good Further information Please contact Andre, Henri, or Andre for more information.

Condition: refurbished (used), functionality: fully functional, Year of construction: 2022, battery capacity: 465 Ah, remaining battery capacity: 98 %, battery voltage: 80 V, total length: 1,025 mm, total width: 564 mm, total height: 784 mm, overall weight: 1,270 kg, fuel type: electric, type of output current: DC, battery manufacturer: Stuba, Forklift battery 80V 3PzS465 TESTED 98% VERIFIED Year of manufacture: 2022 Battery assembled from storage cells in used tray Dimensions (LxWxH): 1025mm x 564mm x 784mm Weight 1270kg Battery serviced and tested by specialist company. Capacity test (C5 discharge test): 458/465 Ah battery Iijdpfxox Hikrj Affsk Remaining capacity: 98 percent With Aquamatik filling system (BFS) With pole screws but WITHOUT final conductors

Condition: used, Year of construction: 2017, 2017 | MAN TGS 33.500 with Schmitz Cargobull SGF S2 (NEW ENGINE) | Used Tipper Truck | 459568 kms 📍Location: Germany, Offenbach am Main 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 61900 or Make an Offer. Iiedpfx Aex Dd Hasffek Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 35 inspection points 31 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good truck+trailer. Regular maintenance needed, all function works 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39749 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: ready for operation (used), Extruder + electric cabinet output: 200 kg Ijdpfxsx Dd Hmo Affjik Heads not included Winder not included

Condition: excellent (used), Year of construction: 2014, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,800 mm, spindle diameter: 130 mm, overall weight: 32,450 kg, year of last overhaul: 2014, The machine is in very good technical condition, equipped with a Heidenhain iTNC 530 CNC control system. Iisdpfox Hfk Iox Affsk Specifications: Spindle diameter: 130 mm X-axis travel: 3000 mm Y-axis travel: 1800 mm Taper in spindle: ISO 50 Spindle extension: 1120 mm Horizontal spindle head extension: 450 mm Total installed motor power: 50 KVA Dimensions (L x W x H): 10100 x 4380 x 5250 mm Weight: 32,450 kg

Condition: used, axle configuration: 3 axles, first registration: 03/2015, loading space length: 13,400 mm, loading space width: 2,500 mm, loading space height: 2,690 mm, total length: 14,100 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22,5, wheelbase: 8,910 mm, color: other, Year of construction: 2015, Equipment: ABS, tail-lift, = Additional Options and Equipment = - EBS - Tail lift = Remarks = Number of axles: 3, Payload: 33,479 kg, Unladen weight: 8,521 kg, Gross weight: 42,000 kg, Chassis type: Incomplete chassis, Chassis material: Steel, King pin size: 2 inch, Suspension type: Full air, ABS, EBS, Body year: 2015, Refrigeration unit manufacturer: Schmitz Cargobull, Refrigeration unit model: tkm, Refrigeration unit: Diesel/electric, Unit operating hours / electric: 96, Unit operating hours / diesel: 9,885, Wall thickness: 45 mm, Axle type: SCHMITZ, Tail lift, Tail lift version: fold-under tail lift, Tail lift capacity: 2,000 kg, Tail lift manufacturer: d'hollandia, Tail lift material: steel and aluminum, Tail lift dimensions: 170x240 = Additional Information = General Information Cab: Day Registration: ON-98-PY Drivetrain Fuel type: Diesel Transmission Transmission: Manual Axle Configuration Tire size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; Tire tread left: 13 mm; Tire tread right: 15 mm Axle 2: Tire tread left: 5 mm; Tire tread right: 8 mm Axle 3: Tire tread left: 10 mm; Tire tread right: 10 mm Weights Unladen weight: 8,521 kg Payload: 33,479 kg Gross vehicle weight: 42,000 kg Functional Tail lift: d'hollandia, fold-under flap, 2,000 kg Refrigeration unit: Diesel and electric (9,885 operating hours diesel; 96 electric) Wall thickness: 45 mm Environment Emission class: Euro 0 Condition General condition: average Technical condition: average Visual condition: average Damages: none = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our offer covers all European brands, model years, and price segments. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • Competitive pricing Isdpevu Rxujfx Affeik • Fair dealing • We speak many languages • We understand our customers • Support with import and transport • (Export) registration plates arranged quickly • Expert technical services • The security of 'recognizable quality' • And much more… Please visit our website for special offers and our complete stock list: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send a request through our website. Ask about our European warranty package directly.

Condition: good (used), Year of construction: 1992, Ref. -No.: 10578 Manufacturer: UNION Type: BFT 130 NC Year of construction: 1992 Type of control: CNC Control: Heidenhain 430 Storage location: Halberstadt Country of origin: Germany X-Travel: 2000 mm Y-Travel: 1600 mm Z-Travel: 1600 mm W-Axis: 600 mm Spindle Diameter: 130 mm W-Travel (Boring Spindle): 900 mm Table Load: 8000 kg Isdpfsx A Safjx Affoik Clamping Area: 1800 x 2000 mm T - groove width: 28 mm T - slot spacing: 160 mm Tool Taper: ISO 50 Spindle Turning Speed - Stepless: 1000 RPM Spindle Speed: 10 - 2000 RPM Max. Torque On The Boring Spindle: 3150 Nm Rapid Traverse X-Axis: 2500 m / min Rapid Traverse Z-Axis: 2500 m / min Drive Capacity - Spindle Motor: 15 - 30 kW Borehole Diameter: 800 mm W-axis feed: 2500 mm / min Y-axis feed: 2500 mm / min Table size: 2000 x 1600 mm Rapid adjustments W-axis: 3150 mm/min. Rapid adjustment Y-axis: 5000 mm / min Cross slide movement: 320 mm Torque max. face support: 5300 Nm Tarpaulin diameter max.: 1400 mm Machine length: 6000 mm Machine width: 4000 mm Machine Height: 4000 mm Weight Of The Machine Ca.: 40 t Further information: The machine can be viewed under power by arrangement.

Condition: like new (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,800 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,250 mm, table load: 5,000 kg, spindle diameter: 105 mm, spindle speed (min.): 10 rpm, spindle speed (max.): 2,500 rpm, table length: 1,400 mm, table width: 1,400 mm, feed length W-axis: 630 mm, rotational speed (min.): 10 rpm, rotational speed (max.): 2,500 rpm, quill diameter: 105 mm, year of last overhaul: 2025, The machine is in excellent technical condition after a complete mechanical overhaul. Equipped with a Heidenhain iTNC 530 control system. Iijdjx E Uhajpfx Affsk

Condition: used, Year of construction: 1994, 1 piece bench drill OPTIMUM OPTI B20T Drilling capacity: 20 mm, serial number 19400 Manufacturer: OPTIMUM Model: OPTI B20T Colour: grey Year of manufacture: 1994 Accessories: with 2 machine vices Location: warehouse Iiodpfxjx A A I Te Affek Condition: used

Condition: used, Year of construction: 2000, Boring Mill Manufacturer: TOS Model: VARNSDORF WHQ 13.8 CNC Year of manufacture: 2000 CNC Control: Heidenhain 426 Completely overhauled in 2022 Report available Iisdpfxox A Ayis Affok Travel (X/Y/Z): 3,500 x 2,500 x 1,250 x B800 mm Number of axes: 5 Table length: 2,200 mm Table width: 1,800 mm Clamping surface: 1,800 x 1,600 mm Table load: 12 t Number of tool stations: 60 Spindle taper: SK 50 Spindle diameter: 130 mm Spindle speed: 2,500 rpm Power: 90 kW Heidenhain handwheel Telescopic covers completely overhauled with new wipers. Dimensions (LxWxH approx.): 7,500 x 6,950 x 4,000 mm Weight: 40 t.

Year of construction: 2000, operating hours: 104,382 h, condition: excellent (used), Vötsch Shock Test Chamber VT 7012 S2 System for extreme temperature cycling Temperature shock testing is used to test the resistance of components, devices, and other products to rapid changes in ambient temperature. The test specimens are subjected to rapid temperature changes in air with alternating upper and lower temperature loads. These cyclical stresses and the accelerated aging caused by temperature changes reveal weaknesses in the test specimen. Vertical arrangement of the test chambers Ball screw drive for safe guidance of the car Cart load capacity 50 kg for VT3 7012 S2 All-around grilles in the car secure the test specimens High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber Hot chamber can be used as a temperature storage unit, cold chamber as a temperature exchange unit Minimal energy consumption No compressed air required Manufacturer: Vötsch Type: VT 7012 S2 Type: Temperature shock test chamber Test chamber volume: 120 l Nominal voltage: 400 V Nominal power: 10 kW Nominal current: 25 A Refrigerant: R452A Cooling unit: Water-cooled Shock cooling (nitrogen cooling) via customer-supplied nitrogen External dimensions Width: 930 mm Depth: 2115 mm Height: 1970 mm Test chamber dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Protection class Device: IP 42 Operating panel: IP 20 Control cabinet: IP 54 Temperature test parameters for single-chamber operation | Test chamber dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Iiodpex Exmtefx Affek Protection class ...Temperatur Temperature range Hot chamber: +50°C to +220°C Cold chamber: -70°C to +70°C Temperature deviation over time: ±2 K in steady state Temperature deviation over space: ±2 K in steady state in the car Heating rate, hot chamber: 11 K/min Cooling rate, cold chamber: K/min Heating rate, cold chamber: 2 K/min Cooling rate, hot chamber: K/min Observation window: 355 x 355 mm Pipe opening: 67 mm Year of manufacture: 2000 Operating hours: 104,382 Weight: 1000 kg Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: used, Year of construction: 2013, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 2,500 mm, table load: 20,000 kg, spindle diameter: 130 mm, spindle speed (min.): 5 rpm, spindle speed (max.): 3,000 rpm, table length: 2,500 mm, table width: 2,000 mm, feed length W-axis: 800 mm, Year of manufacture: 2013. Heidenhain 530 control, 6 axes Iisdox Evhhepfx Affsk Axis travel: X: 6000 mm Y: 2500 mm Z: 2500 mm W: 800 mm Number of controlled axes: 6 Max. table load: 20,000 kg Table dimensions: 2000 × 2500 mm Spindle taper: ISO 50 Spindle diameter: 130 mm Speed range: 5–3000 rpm Max. spindle power: 37 kW Tool magazine: 60 tools

Condition: excellent (used), CTS CTS CW-60/11 – Water-Cooled Climate Test Chamber The CW-60/6 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber designed for performing temperature and humidity testing on multiple specimens simultaneously. Device Description This climate test cell enables functional or material property testing of a specimen under the influence of temperature and humidity. Efficient air circulation with a high recirculated air volume ensures optimal transfer conditions for the test specimens. The air conditioning section is located at the rear of the inner chamber. The system components are mounted in a separate frame behind the chamber for easy accessibility. Control electronics are housed in a discrete control cabinet, with the control panel integrated into the cabinet door. For dehumidification, the chamber is equipped with a self-regenerating compressed air dryer. Fresh air flushing of the test chamber can be performed via a blower. Technical Performance Data: Temperature Testing: - Temperature range: –60 °C to +90 °C - Temporal temperature deviation: ±0.5 to 1 K - Spatial temperature deviation: ±1 K at 200 mm wall clearance - Temperature ramp rate (supply air, linear): Heating: 2 K/min from –40 °C to +85 °C Cooling: 2 K/min from +85 °C to –40 °C Climatic Testing: - Temperature range: +10 °C to +95 °C - Humidity range: 10 % to 95 % RH - Dew point range: +5 °C to +89 °C - Temporal temperature deviation: ±0.5 K Iisdpfjx Ankyex Affsk - Temporal humidity deviation: ±2 to ±5 % RH - Without thermal radiation - At equilibrium state Technical data assume ambient temperature of +25 °C, rated voltage 400 V, without test load, without radiation, and without additional equipment. Dimensions: Internal dimensions (test chamber / usable volume): - Volume: approx. 11,000 liters (11 m³) - Approximate internal dimensions: Width: 2,100 mm, Depth: 2,530 mm, Height: 2,200 mm (may vary slightly depending on configuration) External dimensions: Width: 2,700 mm, Depth: 5,200 mm, Height: 2,520 mm (depending on door, frame, accessories, etc.) Operating Data: - Rated power: 84.4 kW - Rated voltage: 400 V 3/N 50 Hz - Rated current: 131.4 A Technical Specifications: - Refrigeration unit: water-cooled, low-noise, semi-hermetic, continuously variable output via electronic control and monitoring system - Eco-friendly refrigerants: R 23 / R 404 A - Weight: 6,000 kg Notes: - Inspection by appointment possible (46325 Borken) - Shipping via freight carrier available – Costs & arrangements on request - Scope of delivery: (see picture) (Technical data subject to change and errors excepted.) Further questions can be answered by phone.

Condition: used, Year of construction: 2014, Serial number: 2xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21943 Specifications: Year model: 2014 Engine hours: approx. 6000 Power: 105 kW Weight: 11,000 kg Undercarriage (see photos) Remote control Winch Track width: approx. 25 cm Machine width: approx. 220 cm Newly overhauled engine Newly overhauled hammer, used approx. 20 hours after overhaul Stage 4 engine Iodpox Anauofx Affsik Screen backlight is slightly weak Description:Sandvik Dino DC400RI drilling rig from 2014.Both the engine and the hammer have been overhauled. The engine has run approx. 1000 hours since the overhaul, while the hammer has only been used for a couple of weeks.Some minor leakage/sweating.Can be delivered at short notice.See video. Own weight: 11000 Engine hours: 6000 Model: Dino DC400RI Borerigg. Overhalt motor og hammer SE VIDEO

Condition: used, mileage: 630,000 km, power: 338 kW (459.55 HP), first registration: 01/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 01/2025, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), had accident, parking heater, soot filter, * NET TOP PRICE * Engine with rod bearing failure, Engine still starts!!! * Broken Engine with rod bearing failure, Engine still starts!!! * XXL cab with 2 beds * ACC distance warning system * Leaf / air suspension * Emergency brake assist * Hill start assist * ZF Intarder * 2tanks * Cool box * Auxiliary air conditioning * Sun visor * German vehicle * Very good condition WhatsApp: Errors and prior sale reserved !!! Sale takes place under exclusion of any warranty! - Mi goworim po Russki Iedpfxsx En Imo Affsik - We speak english - Mówimy po polsku

Condition: used, functionality: fully functional, machine/vehicle number: WDB61526615351180, mileage: 29,700 km, power: 246 kW (334.47 HP), first registration: 11/1988, fuel type: diesel, overall weight: 14,000 kg, axle configuration: 4x4, fuel: diesel, color: red, gearing type: mechanical, Year of construction: 1988, water tank capacity: 2,500 l, Equipment: all wheel drive, differential lock, Mercedes-Benz 1428 AF (334 hp) All-wheel drive with fire fighting tank body 29,670 km TLF (Decommissioned 04/24) with Ziegler Type 3 superstructure 6 seats 2,500 L water 300 L foam Pump with only 367 operating hours Last Vogt inspection at 357 h Regularly maintained Largely de-equipped HD/ND quick attack unit available Suction hoses included Ready for immediate use again. CEJN charging system (air/power) with automatic eject (plug only) Pneumatic ladder system Ijdpfx Afjxt Rtrofeik Tyres as new Last technical inspection 04/19 Test drive possible No exchanges Sold as is, no warranty, ex yard More information on request

Condition: good (used), mileage: 71,000 km, power: 188 kW (255.61 HP), first registration: 06/1986, fuel type: diesel, empty load weight: 13,295 kg, overall weight: 14,000 kg, fuel: diesel, gearing type: mechanical, operating hours: 1,225 h, Magirus Turntable Ladder DLK 23/12, Year of manufacture: 1986. Operating hours: 1225, last inspection at 1197 operating hours (28 hours ago). Gross weight: 14 t, unladen weight: 13.295 t, swinging seat, differential lock, automatic traction chains, power steering, ABS. German registration. Mileage as per odometer. Vehicle is preferably sold to businesses or for export; private sale conditional. Sale without warranty. The above information is non-binding, subject to errors, changes and prior sale! Phone: 08026/2188 Iiedpfex Eda Aex Affjk

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 6,906 h, load capacity: 3,000 kg, lifting height: 4,900 mm, free lift: 1,700 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 2,250 mm, motor manufacturer: Toyota 4Y, fork length: 1,065 mm, tire condition: 100 %, overall weight: 6,500 kg, empty load weight: 3,000 kg, total height: 2,250 mm, total length: 1,550 mm, total width: 1,500 mm, Equipment: adjustable boom, front guard, head guard, pallet forks, sideshift, Very good condition Fork positioner + sideshift We sell forklifts after a full service. Prepared for the end user. Ready to use. We can arrange transport within Europe and worldwide. Iiedpfxox Eb I Re Affok

Condition: excellent (used), CTS CW‑60/11 – Water-Cooled Climatic Test Chamber The CW‑60/6 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously. Device Description: This climatic test chamber allows you to evaluate the functionality or material properties of your test items under varying temperature and humidity conditions. Efficient air circulation with a high recirculation rate ensures optimal climatic transfer to the test specimens. The air treatment chamber is located at the rear of the interior space. Equipment assemblies are installed in a separate frame behind the unit, providing easy access. The control system is housed in a separate control cabinet, with the operating panel integrated into the cabinet door. For dehumidification, the test chamber features a self-regenerating compressed air dryer. A fan can be used to flush the test chamber with fresh air. Technical Specifications: Temperature Tests: - Temperature range: –60 °C to +90 °C - Temporal temperature deviation: ±0.5 to 1 K - Spatial temperature deviation: ±1 K at 200 mm from wall - Rate of temperature change (supply air, linear): - Heating: 2 K/min from –40 °C to +85 °C - Cooling: 2 K/min from +85 °C to –40 °C Climatic Tests: - Temperature range: +10 °C to +95 °C Iodpfxsx Anipo Affoik - Humidity range: 10 % to 95 % RH - Dew point range: +5 °C to +89 °C - Temporal temperature deviation: ±0.5 K - Temporal humidity deviation: ±2 – ±5 % RH - Without heat radiation - In steady-state conditions All technical data refer to an ambient temperature of +25 °C, rated voltage of 400 V, without test specimens, no thermal radiation, and without additional equipment. Dimensions: Internal (test chamber/usable space): - Volume: approx. 11,000 liters (11 m³) - Internal dimensions (approx.): Width: 2100 mm, Depth: 2530 mm, Height: 2200 mm (may vary slightly by configuration) External dimensions: Width: 2700 mm, Depth: 5200 mm, Height: 2520 mm (depending on door, frame, accessories, etc.) Operating Data: - Rated power: 84.4 kW - Rated voltage: 400 V 3/N 50 Hz - Rated current: 131.4 A Technical Design: - Refrigeration unit: water-cooled, low noise, semi-hermetic, stepless capacity control via electronic monitoring and control system, eco-friendly refrigerants R 23 / R 404 A Weight: 6000 kg Notes: - Viewing by appointment (46325 Borken) - Shipping by freight carrier possible; costs & arrangement upon request - Delivery scope: (see photo) - (Subject to change and error in technical specifications—information provided without obligation.) - For further questions, please contact us by phone.

Condition: used, X-axis travel: 1250 mm Y-axis travel: 1100 mm Z-axis travel: 900 mm Spindle extension (W): 710 mm B-axis: 360° Isdpfjx Dz Rcex Affsik Clamping table size: 1000x1120 mm Max. table load: 3000 kg Spindle taper: ISO 50 Spindle speed: 2500 rpm Main motor power: 20 kW Overall machine dimensions (LxWxH): 6130x3600x2750 mm Total machine weight: 12400 kg Control system: Heidenhain iTNC 530 Accessories: operator's cabin, machine enclosure, measuring probe TS 460, tool holders Spindle hours: 8500

Condition: used, mileage: 565,000 km, power: 338 kW (459.55 HP), first registration: 07/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), had accident, parking heater, soot filter, * NET PRICE * Engine damage / Broken engine * XLX cab with 1 bunk * ACC adaptive cruise control * Leaf / air suspension * Emergency brake assist Iijdpfx Asx En Iasffjk * Hill start assist * ZF intarder * 1 tank * Cooler box * Sun visor * German vehicle WhatsApp: Errors and interim sale reserved!! Sale is made under exclusion of any warranties!! - We speak Russian - We speak English - We speak Polish - We speak ... - We speak Spanish

Condition: good (used), functionality: fully functional, LVD Plate Shear MV 31/3.5 – 3100 × 3.5 mm – Guillotine Shear Iiedpfx Afoxmvl Tsfsk Manufacturer: LVD Company, Gullegem (Belgium) Model: MV 31/3.5 Max. cutting length: 3100 mm Max. sheet thickness (steel): 3.5 mm Drive system: hydraulic Backgauge: electric, 750 mm Machine weight: approx. 4,000 kg Dimensions: approx. 4000 × 1800 × 1600 mm LVD guillotine shear, Model MV 31/3.5, suitable for cutting steel sheets up to 3.5 mm thick over a width of 3,100 mm.

Condition: good (used), mileage: 71,000 km, power: 188 kW (255.61 HP), first registration: 06/1986, fuel type: diesel, empty load weight: 13,295 kg, overall weight: 14,000 kg, fuel: diesel, gearing type: mechanical, operating hours: 1,225 h, Magirus Aerial Ladder DLK 23/12, Year of manufacture: 1986 Operating hours: 1225, last inspection at 1197 operating hours (28 hours ago) Gross weight: 14 t, Unladen weight: 13.295 t, Swivel seat, Differential lock, Automatic snow chains, Power steering, ABS, German registration Mileage as per odometer The vehicle is preferably sold to commercial operators or for export, sale to private individuals subject to reservation Sold without warranty The above information is non-binding; errors/changes and interim sale reserved! Phone: 08026/2188 Iodox Edaispfx Affoik

Condition: excellent (used), Weiss Model: WK3 600/0-M Weiss Climate Test Chamber, Water-Cooled Series: WK3-../0 with SIMPAC* Controller Test chamber volume: approx. 600 liters Test chamber dimensions: Height 950 mm, Width 800 mm, Depth 800 mm External dimensions: Height 1995 mm, Width 1090 mm, Depth 1660 mm Operating data: Test chamber lighting: LED 24 V, 6.8 W / Halogen bulb 2 x 24V, 50W Rated voltage: 1/N / PE AC 230 V ±10% 50 Hz Rated power: 2.3 kW Rated current: 10 A Site-provided fuse: 16 A slow-blow Control cabinet and operator panel protection class: IP 54 Maximum heat emission to environment: 1200 W Sound pressure level: Measured at a distance of 1m from the front, at a height of 1.6m: 46 dB(A) Data for temperature tests: Temperature range: -5°C to +90°C Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1 K Temperature gradient (according to IEC 60068-3-5) Temperature change rate: Heating 0.6 K/min Cooling 0.3 K/min Heat compensation at +20°C to +50°C: 200 W Data for climatic tests: Temperature range: +10°C to +90°C Dew point range: 4 to +89.5°C Humidity range: 10 to 98 % r.h. Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.3 K Spatial temperature deviation: ± 0.5 to ± 1 K Temporal humidity deviation: +1 to +3 % r.h. Refrigerant: R-404A Iodpfx Aox Ag R Ssffeik Weight: 610 kg For your safety as a buyer, please note the following information! The following points are carried out in advance on our offered chambers: 1. Functionality check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (See image) (Technical data and information subject to change and errors!) We are happy to answer any further questions you may have by phone.

Condition: used, mileage: 402,000 km, power: 368 kW (500.34 HP), first registration: 01/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), had accident, parking heater, soot filter, * NET PRICE * ENGINE DAMAGE / ENGINE BROKEN * XLX cab with 2 beds * ACC distance warning Iijdpex En Igsfx Affek * Leaf / air suspension * Emergency brake assist * Hill start assist * ZF intarder * 2 tanks (580l/580l) * Refrigerator box * German vehicle * Very good condition WhatsApp: Errors and interim sales excepted! Sale takes place with exclusion of any warranties! - We speak Russian - We speak English - We speak Polish