Used Emco Turn for sale (142)

Condition: good (used), travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, Manufacturer: EMCO Type: MAXXMILL 500 new 2014 Control system: SIEMENS 840D Year of construction: 2014 High preformance spindle 34,5 kW and 110 Nm torq One setup to machine 500 x 500 x 475 mm (5 sides) Top machine for medium production runs 15 to 300 pieces 3560 Spindle hours Specifications Metric US Standard X - axis 650 mm Y - axis 550 mm Z - axis 500 mm A - axis -100 to +100 ° B - axis 360.000 ° Table length 600 mm Table width 600 mm Table load 250 Feed X - axis 30000 mm/min. Feed Y-axis 30000 mm/min. Feed Z-axis 30000 mm/min. Tool holder ISO 40 ISO/Bt/Mk Spindle power 34 kW kW Spindle speed 10000 rpm Tool changer Ljdpstw Rnfsfx Ab Uohn 30 IKZ 20 Number of controlled axes 5 Chip conveyor Yes Cooling device Yes Dimensions (estimate) Length 2900 mm width 3300 mm height 3000 mm weight 9200 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: good (used), Year of construction: 1996, x-travel: 380 mm Lhjdpfeua E Najx Ab Uon y-travel: 140 mm quill stroke: 40 mm table-size: 630 x 150 mm spindle taper MT: 2 voltage: 380/400 V

Condition: good (used), Year of construction: 2003, Internal item no.: 25045 Universal Milling Machine Emco FB4 Year: 2003 + Accessories (Hydraulic machine vice Allmatic 110 / 12x SK40 holders in rack) + Electrically tested until 11/2028 (as per inspection sticker) + 3-axis digital readout Heidenhain ND780 Travel: X 450 / Y 300 / Z 350mm Quill stroke: 100mm Main drive: 3.2kW Speed range: 63 - 3150 rpm Lsdsw Hrycepfx Ab Ujhn Milling table: 800x400mm Automatic central lubrication Dimensions (LxWxH): 200 x 200 x 200cm Weight: 2100kg

Condition: used, Year of construction: 2017, Emcomat E300 for sale. The machine was manufactured in 2017. Machine type: EM300x1500 SIEM Some repairs have been carried out and the following defects are known to us: Geometry checked. Z-guides in the area of the main spindle (chuck) are slightly worn. Z-slide tilts in X and Y under load up to 0.1mm; in this range, precise work is no longer possible at higher clamping pressure. Tool changer checked and adjusted. Lhedsw I S Uujpfx Ab Ujn X-axis belt replaced and machine zero point set. Automatic band lubrication oil loss – troubleshooting performed, problem resolved, lubrication oil line renewed. Machine is operational – with reservation regarding Z-axis guidance.

Condition: used, turning diameter . mm Lhsdpfx Ajqn A Rrjb Usn turning length . mm swing diameter over bed slide . mm

Condition: good (used), Year of construction: 2000, turning diameter 340 mm turning length 2000 mm control FAGOR 8055 swing diameter 550 mm spindle bore 108 mm spindle turning speed - stepless 2500 U/min power capacity 16.5 kW quill stroke 220 mm diameter of quill 100 mm total power requirement 19 kW weight of the machine ca. 4300 kg dimensions of the machine ca. 4300 x 1600 x 1800 m This EMCO E 300x2000 cycle lathe is supplied complete with all accessories. Description: - Coolant device - 1 piece Luenette open 20-145mm - 1 piece closed guide 15-185mm - 1 piece face plate - 1 piece three-jaw chuck - 1 piece wedge bar chuck D=400mm Lhsdpfx Asvwgpbjb Uen - Parat 4-fold tool holder - Various tool holders

Condition: used, Year of construction: 1990, turning diameter over cross slide: 210 mm, spindle bore: 31 mm, turning diameter: 320 mm, center height: 165 mm, Machine can be tested under power, fully functional incl. accessories collet equipment is included Lodpfxewpkd Sj Ab Ushn

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Universal Tool Milling Machine Emco Emcomat FB-450 Linear with Position Indicator – Near-Mint Condition, CE-Compliant!! Technical Data: >> Year of manufacture: 2013 | Machine No.: F9A124962 >> Milling table clamping surface: 800 x 400 mm T-slots: 8 Slot width: 14 H8 Ljdpfxowycv Is Ab Uehn Slot spacing: 50 mm Maximum load: 150 kg >> Infinitely variable spindle speeds: 10–5000 rpm >> Infinitely variable feed rates: 10–5000 mm/min Rapid traverse X-axis: 5000 mm/min >> Travel (X/Y/Z): 450/350/400 mm >> Vertical and horizontal quill – SK40 >> Hydraulic drawbar system >> Quill stroke: 80 mm >> Weight: approx. 2000 kg >> Dimensions (LxWxH): approx. 2.5 x 2 x 2 m >> Main drive motor: 10 kW >> Spindle brake >> Technical documentation, spare parts plans, operating manual included >> Hinged safety enclosure >> Coolant system >> Machine lamp >> Dividing head >> Rotary table >> Machine vice >> Steady rest About the Machine: For sale is a Universal Tool Milling Machine Emco Emcomat FB-450 Linear with position display, in near-mint condition. The machine comes from a government operation and was used only occasionally for training purposes. The control system is very user-friendly. Additionally, the machine features hydraulic clamping in both vertical and horizontal operation. Conversion from vertical to horizontal mode is very simple due to the tilting vertical head. The Emco has been mechanically and electrically tested in our workshop. Take advantage of the opportunity to inspect and test the machine under power at our facility.

Condition: used, Year of construction: 1995, functionality: fully functional, turning diameter: 25 mm, spindle speed (max.): 5,000 rpm, rotational speed (min.): 5,000 rpm, total height: 1,800 mm, total length: 2,500 mm, total width: 2,200 mm, overall weight: 2,600 kg, bar passage: 25 mm, bar diameter (max.): 25 mm, Emco ET425 2 main spindles, 2 pick-off spindles 2 turrets, 12 tools per turret or 4 driven tools Lhedpfxew Adxpe Ab Usn with double bar feeder magazine

Condition: used, functionality: fully functional, EMCO Lathe Maximat V13 380 Volt Serial No.: D1E8706022 MB No.: 99826 Condition: used Location: 86928 Hofstetten Price: €8,900 net Lodjv H Uklspfx Ab Ujhn

Condition: new, Year of construction: 2025, functionality: fully functional, spindle bore: 50 mm, turning diameter over bed slide: 400 mm, center height: 200 mm, spindle speed (min.): 50 rpm, spindle speed (max.): 4,000 rpm, total length: 2,495 mm, total width: 1,730 mm, total height: 1,700 mm, type of input current: three-phase, overall weight: 1,500 kg, rotational speed (min.): 50 rpm, rotational speed (max.): 4,000 rpm, three-jaw chuck diameter: 200 mm, Equipment: rotational speed infinitely variable, Cycle controlled lathe Ledpodtmwtefx Ab Ujhn center width 1000 mm centre height 200 mm spindle bore 53/50 mm max. Speed 4000 rpm Spindle connection size 5, DIN55029 Max. drive power Drive power 7,5 / 10 kW Manual machine (operation via electronic handwheels) Siemens 828D full CNC control dimensions (LxWxH) 2320 x 1730 x 1700 mm Machine weight 1500 kg As a regional partner of EMCO we offer maintenance, service and training in the field of conventional machines. Visit our showroom in Stuttgart for machine inspections.

Condition: like new (used), Year of construction: 2001, operating hours: 100 h, functionality: fully functional, turning diameter over cross slide: 200 mm, spindle bore: 50 mm, turning diameter over bed slide: 350 mm, turning length: 700 mm, total length: 1,650 mm, total width: 1,050 mm, total height: 1,650 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 35 rpm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 35 rpm, type of input current: three-phase, three-jaw chuck diameter: 200 mm, Equipment: rotational speed infinitely variable, Accessories: - 3-jaw chuck with internal and external jaws - 3-axis digital readout - electrical diagram - multifix tool holder with 3 holders - coolant system - machine lighting - live center - bed stop Lhedpowy Hvxefx Ab Uen - machine feet

Condition: good (used), Year of construction: 2000, High-performance CNC vertical machining centre with SIEMENS 840 D, 2-fold pallet changer, IKZ, linear guides and 30-fold WZW Lhsded I R E Nepfx Ab Ujn table size 2 x 1000 x 450 mm tool holder DIN 69871 ISO 40 travel X-axis 1100 mm Y-axis 500 mm Z-axis 640 mm speed range 50 - 10.000 rpm table load 600 kg feed range, X/Y/Z, infinitely variable - 10000 mm/min rapid traverse in all axes 30 m/min Drive power 18,5 kW Machine dimensions L x W x H approx. 3605 x 3041 x 3220 mm weight approx. 6700 kg Accessories / special features: - CNC-control SIEMENS 840 D - 2-fold pallet changer - 30-fold tool changer - Full protection cabin with safety doors, electrically protected - High speed up to 10.000 rpm and drive power with 18,5 kW - Linear guides with double recirculating roller shoe, allowing high torques to be absorbed uniformly in all directions - Ball screw spindles in all 3-axes - The entire machine bed is made of Meehanit cast iron and ensures precision, rigidity and vibration damping - Tool holder DIN 69871, ISO 40 - Hinged chip conveyor with integrated coolant system - 4th axis already prepared - CE-conform Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: like new (used), Year of construction: 2008, functionality: fully functional, Universal Milling Machine Emco C40 Linear with Digital Display and Path Control, Excellent Condition, CE Compliant! Technical Data: >> Year of manufacture: 2008 Machine No.: BA1DW2503 >> Milling table clamping surface: 800 x 400 mm Clamping slots: 8 Slot width: 14 H 8 Slot spacing: 50 mm Maximum load: 300 kg >> Infinitely variable spindle speeds: 10–5000 rpm >> Infinitely variable feed rate: 10–2000 mm/min Rapid traverse X-axis: 5000 mm/min >> Travel (X/Y/Z): 450/350/400 mm >> Vertical quill and horizontal spindle – ISO 40 (SK40) >> Hydraulic pull-in system >> Quill stroke: 80 mm >> Weight: approx. 2000 kg >> Dimensions (LxWxH): approx. 2.5 x 2 x 2 m >> Main drive motor: 7 kW >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual Lhsdpfxswxxd Ee Ab Ujn >> Hinged enclosure >> Coolant system >> Machine lamp >> Indexing/Dividing attachment with tailstock >> Steady rest >> Röhm machine vice About the machine: Offered for sale is a universal milling machine Emco C40 Linear with path control. This universal milling machine is in almost as-new condition. It comes from a governmental facility where it saw only limited use. The control unit is very user-friendly. Additionally, the machine features hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal setup is very straightforward by simply swinging away the vertical head. The Emco has been both mechanically and electrically inspected by us. Take the opportunity to view and test the machine under power at our location.

Condition: used, weight approx.: 450messurements (LxWxH): 1250x1350x1550y-travel: 300z-travel: 200x-travel: 350speed range: 80-2200table diamension: 600x200 Description:  Lhodjrgvbpepfx Ab Usn -)coolant equipment -)machine lamp Revs80 – 2200 (8) r.p.m.TaperDIN2078 ISO30 (Anzugsschraube M12)Working area300 x 200 x 350 mmTable600 x 200 mmFeeds stepless X,Y range20 – 200 mm/id traverse X,Y range1200 mm/ll travel45 mmMax. feed force1600 NmSpindle motor1,1/1,4 kWvertical table600 x 200 mmDistance vertical milling spindle - milling table20 – 370 mmDistance horizontal milling spindle - milling table84 – 434 mmFeed in X-axis (stepless)20 – 200 mm/minLength1250 mmWidth1350 mmHeight1550 mmWeight450 kg

Condition: used, Year of construction: 2013, Technical details: bar material dia.: 65 mm turning length: 644 mm turning dia. over bed: 600 mm turning diameter over slide: 430 mm y-axis: 100 (+-50) mm turning speeds: 2x 5.000 1/min positive location each: 2x C-Achse, 0,001° Grad Sub spindle: ja/yes turret (x-stations): 2x 12 VDI 30 Pos. driven tools: 2x 12 Pos. turning speeds: 2x 4.000 1/min control: FANUC 18 iTB total power requirement: 30 kVA weight of the machine ca.: 8 t dimensions of the machine ca.: 3,5 x 2,5 x 2,3 m turning- milling center with Y-axis, collet device on main and subspindle, high pressure pumps 2x 14bar, parts catcher/conveyor, barloader ENTL 10-65, chip conveyor, lot of accessories approx. 54.500 hours "machine on", 30.500 h "automatic", 14.000 h "feeding" * Lhjdpfophuwqsx Ab Ujn

Condition: new, Year of construction: 2025, functionality: fully functional, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 10 rpm, rapid traverse X-axis: 5,000 m/min, rapid traverse Y-axis: 5,000 m/min, rapid traverse Z-axis: 5,000 m/min, table length: 800 mm, table width: 400 mm, total height: 1,990 mm, total length: 2,100 mm, total width: 2,190 mm, rotational speed (max.): 5,000 rpm, rotational speed (min.): 10 rpm, overall weight: 2,370 kg, table load: 300 kg, workpiece weight (max.): 300 kg, Equipment: documentation/manual, rotational speed infinitely variable, When space is at a premium and maximum accuracy is required, conventional milling machines are in demand. The cycle-controlled milling machines offer an economical alternative for the production of small batches or larger workpieces.Machine highlights:- Pivoting control panel- Right/left rotation of the main spindle- All pinching points eliminated by covers- Hardened and ground shafts and gearwheels- Linear guides- Main motor with spindle brake- Quadruple-bearing radial/axial milling spindle- Sinumerik 828D or Heidenhain TNC 620working area:- Traverse path in X/Y/Z: 600 / 400 / 400 mm Distance spindle nose table: 230 - 630 mm (horizontal milling spindle) - Rapid traverse speed X/Y/Z: 5000 mm/min- Working feed X/Y/Z: 10 - 2000 mm/min- Max. travel distance in X/Y/Z: 600 / 400 / 400 mm- Max. travel distance spindle nose table: 230 - 630 mm (horizontal milling spindle) - Max. travel distance X/Y/Z: 5000 mm/min- Max. travel distance X/Y/Z: 10 - 2000 mm/min- Max. travel distance X/Y/Z: 630 mm Feed force in X/Y/Z: 10 / 10 / 15 kN- Clamping surface: 800 x 400 (rigid angular table)- Max. feed force in X/Y/Z: 10 / 10 / 15 kN- Max. feed force in X/Y/Z: 10 / 15 kN- Max. feed force in X/Y/Z: 800 x 400 (rigid angular table) Table load: 300 kg (rigid angular table)Vertical milling head:- Speed range: 10-5000 rpm- Power: 13 kW Lhedpfx Abjd D I Tmo Usn

Year of construction: 2006, condition: excellent (used), Control system Siemens 840D –Chop Mill—Carte Eternet Spindle recently changed stroke X axis 2000 stroke Y axis 800 Lhjdpfx Abol Dr D Ue Uon stroke Z axis 700 rotation speed range 30 000 tr/min coolant through spindle (CTS) 30 bars with 2 metal filters 60 microns Electronic handwheel Linear scales Pressurized optical rulers for X and Y axis motion control Chip conveyor Coolant gun

Condition: excellent (used), Year of construction: 2018, EMCO Concept MILL 55 Year of manufacture 2018 With tool changer PC-controlled 3-axis universal milling machine for basic CNC training with various industrial controls. Machine complete with full enclosure, CE-compliant safety features, continuously variable main drive, automatic reference point approach, machine light, electrical and mechanical preparation for automation, PC interface card, PC-machine connection cable, data storage device with machine data, tool set for operation, operating manual with spare parts list. The interchangeable control system The interchangeable control system, with which all Concept machines can be equipped, is unique. The user is trained on all commercially available CNC industrial controls on a single machine. Currently, up to eight different controls can be learned. The result: CNC technicians can be deployed flexibly. And that's a decisive advantage: for the specialists as well as for the company. Working Area • Longitudinal X-axis travel: 190 mm • Transverse Y-axis travel: 140 mm • Vertical Z-axis travel: 260 mm • Min. spindle nose-to-table distance: 77 mm • Max. spindle nose-to-table distance: 337 mm Milling Table • Table dimensions (L x W): 420 x 125 mm • T-slots: Number, width, and spacing: 2 x 11 x 90 mm • Max. table load: 10 kg Milling Spindle Drive • Speed range: 150 - 3500 rpm • Three-phase asynchronous motor power: 0.75 kW • Spindle torque: 3.7 Nm Axes • Working feed: 0 - 2 m/min • Maximum feed force X/Y: 800 N • Maximum feed force Z: 1000 N • Average Positioning range according to VDI 3441 in X/Y: 0.008 mm • Average positioning range according to VDI 3441 in Z: 0.008 mm Tool system • Number of tool stations: 8 • Tool selection with directional logic • Max. tool diameter: 40 mm • Max. tool weight: 1 kg Scope of delivery Emco Concept Mill 55 with tool changer Cable Easy2Operate WinNC Sinumerik Operate Base Leveling elements I/O expansion Pneumatic expansion Lodpfx Ajwkpzleb Ushn Automatic door Pneumatic vise Robotic interface DNC interface W-holder package

Condition: like new (used), Year of construction: 2008, functionality: fully functional, Equipment: documentation/manual, Universal Milling Machine Emco C40 Linear with Digital Display and Path Control Very Good CONDITION CE-Compliant!! Technical Data: >> Year of manufacture: 2008 Machine No. BA1DW2501 >> Milling table clamping surface: 800 x 400 mm Clamping slots: 8 Lsdpfewxxdfex Ab Uohn Slot width: 14 H 8 Slot spacing: 50 mm Max. load: 300 kg >> Infinitely variable spindle speeds: 10–5000 rpm >> Infinitely variable feed: 10–2000 mm/min Rapid traverse X: 5000 mm/min >> Travel X/Y/Z: 450/350/400 mm >> Vertical and horizontal spindle – SK40 >> Hydraulic drawbar system >> Quill stroke: 80 mm >> Weight approx. 2000 kg >> Dimensions approx.: 2.5 x 2 x 2 m >> Main drive motor: 7 kW >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual >> Hinged safety enclosure >> Coolant system >> Machine lamp >> Dividing head with tailstock >> Counterholder >> Röhm machine vice About the machine: For sale is a universal milling machine Emco C40 Linear with path control. This universal milling machine is in almost as-new condition. It comes from a government facility where it was only used occasionally. The control system is very user-friendly. Furthermore, the machine is equipped with hydraulic clamping in both vertical and horizontal modes. Switching from vertical to horizontal operation is very simple by folding away the vertical head. The Emco has been mechanically and electrically inspected by us. Take advantage of the opportunity to view and test the machine under power at our location.

Condition: ready for operation (used), Year of construction: 2022, Control Unit Brand SIEMENS Model sinumerik 840 D Main Drive Number of axis 3 Movement X-Axis Movement 200 mm Y-Axis Movement 150 mm Z-Axis Movement 150 mm Additional Equipment Complete cooling system Central automatic lubrication Touch screen, keyboard, mouse, and control panel Lodpfx Abswbatao Ujhn This 3-axis EMCO Concept Mill 105 was manufactured in 2022. Ideal for precision CNC milling, this machine offers robust construction and modern design. If you are looking to get high-quality milling capabilities consider the EMCO Concept Mill 105 machine we have for sale. Contact us for more information. Application Types Milling

Condition: good (used), Year of construction: 1995, Description Control Sinumerik 810M Spindle speed 5000 rpm Lsdpfx Abovt Amuo Uohn Turret head 12 - position Table clamping surface length 850 mm, width 325 mm Very good condition, regularly serviced. Operating instructions German Number of axes 3 (X, Y, Z) Travel path X 420mm, Y 330mm, Z 240mm Control: Sinumerik 810 M Max. spindle speed 5000 rpm Automatic tool changer for 12 tools SK40 holder Coolant system

Condition: new, Year of construction: 2024, EMCO Concept MILL 105 PC - controlled CNC - table - machining center machining center Machine complete with full enclosure, safety devices according to CE, 10-fold tool drum, Ledpetz S Rhsfx Ab Uohn central lubrication, machine light, electrical and mechanical preparation for automation, Tool set for operation. Year 2024

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Emcomat Emco EM20D Lead and Feed Lathe, built in 1995, in excellent condition, CE compliant! Technical specifications: >> Year of manufacture: 1995 >> Center height 200 mm >> Swing over bed 400 mm >> Swing over cross slide 250 mm >> Turning length: 1000 mm >> Spindle speed: 4 speed levels, continuously variable from 35-3000 rpm >> Quill stroke 120 mm >> Tailstock: MT3 >> Spindle bore: 50 mm >> 20 longitudinal feeds 0.045 / 0.787 mm/rev >> 20 cross feeds 0.023 / 0.406 mm/rev >> Space requirements / installation dimensions approx. length 1.900 x depth 0.9 x height 1.3 meters >> Weight approx. 850 kg Accessories and equipment: >> 3-axis position indicator >> 1 piece Three-jaw chuck with 1 set of jaws >> Tool holder with 3 pockets >> Chip return wall >> Coolant system >> Bed stop About the machine: Offered is an Emcomat 20D centerline and feed spindle lathe, built in 1995, in lightly used condition. The machine is fully functional. All slides run very smoothly and evenly. The bed guides are in very good condition. Take advantage of the opportunity to view this machine on-site under power and see for yourself its condition. Lhodpfxowag Ste Ab Uen

Condition: excellent (used), functionality: fully functional, Emcomat 17D Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C New from Training Workshop Excellent Condition!!! Technical Data: >> Year of manufacture: approx. 2000 >> Machine no.: D3F H1 010 >> Centre height: 170 mm >> Swing over bed: 340 mm Lodjwvuf Tspfx Ab Uohn >> Swing over cross slide: 190 mm >> Turning length: 700 mm >> Spindle speed: 4 speed ranges, stepless from 35 to 3000 rpm >> Tailstock quill stroke: 120 mm >> Tailstock: MT3 >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 – 0.787 mm/rev >> 20 cross feeds: 0.023 – 0.406 mm/rev >> Required floor space approx. (L x D x H): 1.600 x 0.9 x 1.3 meters >> Weight: approx. 730 kg Equipment and Accessories: >> 3-axis digital readout from K&C, new, with 12 months manufacturer’s warranty and operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 piece three-jaw chuck NEW 160 mm, 2 sets of jaws >> Multifix B toolholder with 2 tool pockets >> Chip guard >> Coolant system About the machine: Offered here is an Emcomat 17D lead and feed screw lathe, approx. year 2000, in very good condition. The machine is of course fully functional. The bedways are in excellent condition. The Emco is equipped with a new 3-axis digital readout from K&C and a new three-jaw chuck. Take the opportunity to inspect the machine under power on site and see the condition for yourself.