Used Elevator for sale (772)

Condition: new, The 3 T Workshop Press is a versatile Manual Workshop Press that excels in driving in and out arbors, bushings, spindles, and pins, as well as keyway broaching. This compact machine is characterized by its heavy one-piece casting design, offering stability and reliability in various mechanics and repair shop applications. With a press force of 15 kN and a throat depth of 155 mm, it is well-equipped for tasks such as press-fitting and pulling bearings, aligning, and bending. The integrated operator manual ensures ease of use, allowing you to maximize the efficiency of the 3 T Workshop Press. With its robust construction and broad application range, this KNUTH press stands as an essential tool for your workshop needs. To elevate your workshop capabilities, consider ordering the 3 T Workshop Press today. Dcsdpfxsuy Iakj Ab Tor

Condition: used, Year of construction: 2019, operating hours: 9,450 h, Equipment: ABS, all wheel drive, * CAT MH 3022 * Year of manufacture: 2019 Dcjdpfx Abswz Ui Aj Tjr * Operating hours: 9,510 h * 4 x supports * Elevating cabin * Air conditioning * Polyp grab * The machine runs very well

Condition: new, Year of construction: 2024, Equipment: all wheel drive, Magni ES2223RTP 22m Scissor Lift Megadeck Fully Electric • Automatic stabilizers for working at height • Self-locking platform door • Speed limiter at maximum height • Platform overload control • Automatic braking system • Non-marking tires • Tilt indicator with alarm • Audible lowering signal and twin LED beacon • Safety bar for maintenance • Horn • Emergency stop button • Emergency lowering system • Tie-down lugs • Onboard diagnostic system • Hour meter • Proportional controls • Folding guardrail • Power supply on platform • Explosion-proof hoses • Motion alarm • Charging protection system • Lifting and anchoring points • One-sided and automatic platform extension • All-wheel drive Dcodpfx Absxl Nybj Tjr • Four-wheel steering • Weight-dependent lowering system • Emergency pump Specifications: Capacity: 750 kg Max. persons: 4 Working height: 22 m Platform height: 20 m Length: 4.95 m Width: 2.46 m Overall height (rails up): 3.86 m Transport height (rails down): 3 m Platform length: 4.95 m Platform width: 2.25 m Ground clearance: 40 cm Wheelbase: 2,290 mm Inside turning radius: 2,150 mm Outside turning radius: 4,850 mm Drive motors: 4 × 32 VAC / 3.3 kW Lift motors: 2 × 48 VDC / 10.0 kW Travel speed (stowed): 5 km/h Travel speed (elevated): 0.40 km/h Gradeability (max): 40 % Working inclination: 2° / 3° Batteries: 48 V / 630 Ah Errors and prior sale excepted. Internal vehicle number: R58

Condition: used, mileage: 141,481 km, power: 70 kW (95.17 HP), first registration: 10/1983, overall weight: 6,800 kg, fuel type: diesel, color: red, next inspection (TÜV): 09/2025, gearing type: mechanical, loading space volume: 1 m³, loading space width: 1,850 mm, loading space length: 1,950 mm, loading space height: 400 mm, Equipment: all wheel drive, * Municipal vehicle * Analog tachometer * Roof hatch * Rear window * Differential lock front axle * Differential lock rear axle * Transfer case * Engagable front axle * Steel bumper * Elevated air intake * Trailer hitch * Creeper gear * Work gear * Driver’s suspension seat * Orange rotating beacon * Passenger bench seat * 8-speed Dodpowqiufefx Ab Tecr * Suspension: other * Payload: 2300 ----Body: 3-side steel tipper, lashing eyes. Front PTO, mount for front equipment carrier + 4 hydraulic connections, auxiliary headlights. Swiveling front broom, working width approx. 2,250 mm, double-sided swiveling snow plow, working width approx. 3,000 mm. Mount for additional equipment + 2 hydraulic connections at rear. Range change gearbox with work group (work/road gears, creeper gear). Sale only to businesses. FOR EXPORT ONLY THE NET PRICE HAS TO BE PAID!!!!! ALL INFORMATION WITHOUT WARRANTY, PARTICULARLY EQUIPMENT+ACCESSORIES. The basis of all purchase contracts, invoices, proforma invoices, orders, and sales discussions are our terms and conditions (see imprint).

Condition: used, Year of construction: 2021, operating hours: 998 h, Equipment: all wheel drive, Sennebogen 355 E, telehandler, year of construction: 2021, operating hours: only 998h!, incl. grapple bucket 2.500l, additional hydraulics, hydraulic quick coupler, engine: Cummins B4.5-C165 [140hp/103kW], all-wheel and all-wheel steering (4x4x4) ? crab steering, lifting capacity: 5,500kg, lifting height: 8,450mm, level control, elevating cab 4,250mm, operating weight: 11,800kg, very good condition, ready for immediate use, Dedpsvklrhjfx Ab Tecr On request we can make you a leasing or financing offer, Mr. Mihm (Tel. We will be happy to assist you. Further information can be found on our homepage. Subject to errors and prior sale! _____ Sennebogen 355 E, telehandler, year of construction: 2020, operating hours: only 998h! incl. 2.500l grab bucket, additional hydraulics, hydraulic quick coupler, engine: Cummins B4. 5-C165 [140 hp/103kW], all-wheel drive and all-wheel steering (4x4x4) - crab steering, lifting capacity: 5.500kg, lifting height: 8.450mm, level control, elevating cab 4.250mm, operating weight: 11.800kg, very good condition, ready for immediate use, On request, we can make you a leasing or financing offer, Mr. Mihm (Tel. We will be happy to assist you. Further information can be found on our homepage. Subject to errors and prior sale!

Condition: new, Year of construction: 2025, -Smart Safety Clean Air Enhanced Efficiency Dcodpfevg U Dxox Ab Tjr -Elevate your workplace safety with the TFON Airwet Series — a state-of-the-art wet-type air suction system engineered to eliminate sparks and dust produced during deburring processes. The Airwet Series significantly reduces the risk of fire and explosion, protecting both your workforce and your facility. -Fire & Explosion Prevention: Effectively minimizes hazardous particles and ignition sources right at the source -Enhanced Air Quality: Captures and removes airborne contaminants, creating a cleaner and healthier work environment Seamless Integration: Compact, space-saving design allows for easy installation into existing machinery and workflows Increased Safety & Regulatory Compliance: Supports compliance with occupational health and safety standards, boosting overall operational safety

Condition: new, Year of construction: 2021, Your contact persons in our company Mr: Andre Evering Mr.: Mario Klöver Mr: Simon Blank Included in delivery: 01x end post elevation, new Design: Universal Material colour: RAL 5010 Gentian blue Total height: 700 mm Useful height: 500 mm Telescopic: 600 - 1.150 mm depth Frame profile dim.: 45 x 45 mm angle Dcedsdd Ev Nspfx Ab Tsr Hole grid: 6 x 25 mm Hole diameter: 30 x 10 mm Weight: 6 kg / pc. Our services at a glance: (Prices on request) - Assembly, erection our general assembly conditions are to be considered - Shelf inspection Rack inspection according to DIN EN 15635 carried out according to the requirements of BGR 234 Visual inspection for all racking systems - Delivery with our own fleet of vehicles (without unloading) Shipping costs on request!

Condition: used, mileage: 395,000 km, power: 324 kW (440.52 HP), first registration: 07/2012, overall weight: 26,000 kg, fuel type: diesel, color: orange, axle configuration: 6x2, maximum load weight: 10,540 kg, empty load weight: 15,460 kg, next inspection (TÜV): 03/2026, wheelbase: 5,100 mm, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, crane, cruise control, differential lock, fog lights, onboard computer, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, company premises. Equipped with 1x comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, ABS (anti-lock braking system), traction control (ASR), constant throttle, PTO (power take-off), AS-Tronic automatic transmission, central lubrication system, differential lock, fog lights, work lights, beacon, storage box, leaf and air suspension, last axle liftable and steerable, trailer coupling (air+light), aluminum tank, underride guard, side aluminum safety guard, hydraulic cross locking, roof hatch, crane mounted behind cab, emergency stop, grapple control, foldable, elevated seat, 2-point hydraulic outriggers, 2x hydraulic extensions, green environmental sticker. Wheelbase: 5100 mm. Body: Palfinger T18 hooklift system for containers up to 6.5m & Palfinger Epsilon Q150Z96 crane with crane cab. Roller height approx. 1260mm! Engine PTO and auxiliary drive. Load chart: 3m – 4660kg, 4m – 3500kg, 5m – 2780kg, 6m – 2300kg, 7m – 1950kg, 8m – 1680kg, 9m – 1470kg. Grapple available at extra charge! Approx. €7,000 invested in wear part repairs! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted! Djdpfxswngl No Ab Tocr

Condition: new, Year of construction: 2024, Equipment: all wheel drive, Dingli BT22BERT 22.5m Telescopic Boom Lift Fully Electric – 2 units available - Modular design with parts compatibility across the entire product range - Proportional controls - Steering knob on joystick - Beacon light - Horn - Hour meter - Kit for extreme environments - 12 V DC emergency power supply - Oscillating front axle for enhanced stability on all types of terrain - 4 steerable wheels - 4 driven wheels - All-wheel axle with locking differential - 360° continuous rotation - Special integral drive axle for construction machinery - Self-leveling work platform - Work platform can rotate +/-90° - Power socket on platform - Drive enable system - Load monitoring system on platform - On-board diagnostic system - Tilt indicator with alarm - Anti-crush protection - Emergency lowering system - Lithium battery – maintenance-free - Battery capacity: 80V/420Ah - Charger for single-phase and three-phase 380V & 220V - Charging time from 0 to 100% (hours): 5.5 Max. working height: 22.50m Max. basket height: 20.50m Max. outreach: 17.28m Lifting capacity: 454kg Max. occupants: 3 persons max. Gradeability (stowed): 30% Max. working slope X-5°/Y-5° Max. wind speed: 12.5m/s Slew rotation: 360° Vertical boom rotation: 135° Boom type: regular Boom length: 2.29m Vertical jib rotation: 135° Basket width: 0.91m Basket length: 2.44m Basket rotation: 180° Total weight: 13,300kg Speed (stowed): 6km/h Speed (elevated): 1.1km/h Tyres: 315/55D20 Hydraulic oil tank capacity: 165l Battery capacity: 420Ah/80V Charger type: 380V & 220V Charging time, 0–100%: 5.5h Traction motors: 54VAC/18kW Emergency power system: 12V DC Platform length (transport): 7.25m Platform width (transport): 2.50m Platform height (transport): 2.70m Dedpfjxmqvmjx Ab Tecr Subject to errors and prior sale. Internal vehicle number: R117

Condition: refurbished (used), functionality: fully functional, The K+G Wetter SM 65 Bowl Cutter with Vacuum is a premium industrial machine designed for the highest quality fine-emulsifying and chopping of meat products. The addition of the vacuum system elevates product quality, making it ideal for high-end sausages, emulsions, and specialty products. Vacuum Advantage & Quality Control Superior Product Quality: The integrated Vacuum System removes air from the product during cutting and mixing. This prevents oxidation, enhances color stability, improves product binding, and significantly reduces air pockets, resulting in a denser, higher-quality final emulsion. Dcjdpfxoxv Sk Dj Ab Tor High Knife Speed: Features a Knife shaft continuously variable from 50 to 5000 rpm, providing extreme precision to achieve the exact desired texture and fineness. Temperature Monitoring: Includes a precise Temperature monitoring system, giving the operator vital control to prevent product quality degradation. Efficient Mixing: The Mixing cycle return value of 50–500 U/min ensures thorough and gentle incorporation of ingredients, even under vacuum. Power & Operational Benefits Consistent Batch Quality: The variable speeds and vacuum control ensure highly reproducible, uniform results for every 65-liter batch. Heavy-Duty Power: Features substantial Installed Power of 24 kW, providing the necessary force to cut and emulsify tough, chilled, or frozen products efficiently. Safety and Noise Reduction: Includes a Noise protection cover and the knife shaft for a safer, quieter working environment. Hygienic Design: Constructed from stainless steel with a focus on accessibility for maintenance and easy, thorough cleaning, adhering to rigorous industry hygiene standards.

Condition: used, Year of construction: 2018, operating hours: 9,424 h, Equipment: all wheel drive, Caterpillar MH3024 material handler, year of manufacture: 2018, operating hours: 9,424 h, elevating cab, central lubrication system, rear-view camera, 4x outriggers, German machine, first owner, immediately available for operation! Dedpfxow S Rw As Ab Tjcr Optional: HGT CAT grab (year of manufacture: 2019) = €5,000 net On request, we can provide a leasing or financing offer. Mr. Ebert (Tel. ) will be happy to assist you. Further information can be found on our homepage. Subject to errors and prior sale!

Condition: ready for operation (used), functionality: fully functional, A good used take off conveyor in stainless steel fitted with modular belt suitable for use with bagmaker to take filled bags and elevate up to working height - this conveyor is in stainless steel and it was designed and built to accept a metal detector if required (see metal free zone) - complete unit on lockable swivel castors with brakes - three phase geared drive motor with gearbox - modular belt with flights Ready to ship worldwide Ask for more videos and pictures via Whats App Dodpfx Abewucfrs Tecr Floor length - 2200mm Belt width - 300mm Infeed height to top of belt - 180mm Outfeed height - 1050mm

Condition: new, Year of construction: 2021, Your contact persons in our company Mr.: Andre Evering Mr.: Mario Klöver Mr.: Simon Blank Included in delivery: Dcjdpfx Abedd Ewbe Tjr 01x end post elevation, new Finish: Universal Material color: RAL 1018 Zinc yellow Total height: 700 mm Useful height: 500 mm Telescopic: 600 - 1.150 mm depth Frame profile dim.: 45 x 45 mm angle Hole grid: 6 x 25 mm Hole diameter: 30 x 10 mm Weight: 6 kg / pcs. Our services at a glance: (prices on request) - assembly, erection our general assembly conditions are to be observed - Rack inspection Rack inspection according to DIN EN 15635 carried out according to the requirements of BGR 234 visual inspection for all racking systems - Delivery with our own fleet (without unloading) Shipping costs on request!

Condition: used, mileage: 512,000 km, power: 302 kW (410.61 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 33,000 kg, empty load weight: 17,835 kg, maximum load weight: 15,165 kg, axle configuration: 6x6, number of seats: 2, first registration: 04/2008, emission class: euro5, brakes: engine braking, suspension: steel, loading space length: 4,800 mm, loading space width: 2,420 mm, loading space height: 1,000 mm, driver cabin: day cab, wheelbase: 3,820 mm, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, crane, cruise control, differential lock, fog lights, low noise, onboard computer, power assisted steering, seat heater, trailer coupling, Vehicle location: Bovenden, steel body, registration as house, 1 comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, air horn, ABS (anti-lock braking system), constant throttle, PTO, raised exhaust, automatic transmission, differential lock, fog lights, high beam headlights, rotating beacon, leaf suspension, sideboards control left, sideboards control right, air+power trailer coupling, aluminum tank, low-noise G1, flap, doors, side aluminum underrun protection, roof hatch, crane behind cabin, emergency stop, grab control, foldable, elevated stand, 2-point hydraulic support, 2x hydraulic extensions, green environmental badge. Wheelbase: 3820 mm Body: 3-way tipper body with aluminum sideboard on the right, double-sided sideboards control, combi-flap & Palfinger PK12000 A crane (year 2007) with elevated stand. Load chart: 4.5 m - 2510 kg, 6.1 m - 1820 kg, 8.1 m - 1360 kg! Dcsdpfxewp Imqo Ab Tjr ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to change, prior sale, and errors!

Year of construction: 2017, condition: excellent (used), Complete Baader 176 Flatfish filleting line This complete Flatfish filleting line is new bought in 2017 and is used for 1 year. This line consist of the following equipment: Baader 176 Flatfish filleting machine; Baader 61 Grinding machine; Elevator conveyor belt; Trimming table (black side); Trimming table (white side); Baader 176 Flatfish filleting machine Dcjdpfx Aboic Rc Aj Ter BAADER 176 processes a great number of different types of flatfish with a very high yield. From heading, gutting, filleting to tail cutting BAADER 176 operates computer controlled.  To ensure always optimal cuts it is necessary to have optimally sharpend knives. BAADER 62 Knife Sharpening Machine is specially designed for that purpose. Brand: Baader Type: 176 Year: 2017 Fish species: Plaice/Sole/Flounder/Halibut/And similar Working range (approx.): 27-55 cm in total length Troughput: Up to 65 fish/min. Operator: 1 person Water consumption: Abt. 10 l/min. Power : 3,8 kW Dimensions: 2.600x2.250x2.300 mm Weight: 1.800 kg. Baader 61 Grinding machine This machine is especially intended to sharpen the circular knives used in BAADER fish and meat processing machines. To meet the requirements in praxis, it is however laid out for a considerably extended size range. BAADER sharpening machines are an indispensable auxiliary since only sharp knives guarantee the exact and clean results required by the practician. Working range All circular knives from 90–400mm Ø used in BAADER machines

Condition: excellent (used), INOX PRESSURE BOILER WITH LEVEL SENSOR AND LIFTER GRACO Ref. 236151 (OPTIONAL SENSOR AND LIFTER) - Brand: GRACO - Ref. No.: 236151 - INOX Djdpsivt Twjfx Ab Tecr - Capacity 55 liters - For paints, lacquers, varnishes, etc. - OPTIONAL: SENSOR AND ELEVATOR (+1500€) - Siemens level sensor - Single column elevator. - Second hand product completely overhauled. - 1 year warranty except sensor. It is in a condition equivalent to that of a new product. - VAT not included - 2 in stock available

Condition: used, Year of construction: 2021, operating hours: 1,100 h, Equipment: all wheel drive, Kobelco ED160BR-7 - Year of manufacture: 2021 - Operating hours: approx. 1,100 h - OilQuick OQ65 SH quick coupler - Isuzu engine [86 kW / 117 HP] - 6-way dozer blade - Elevating cab, tiltable - Front and roof protective grilles - Rubber track pads - Hammer/grapple auxiliary circuit, leak oil line - Camera system - Refueling pump - Very good condition, immediately ready for operation Optional: Woodcracker C350 - Year of manufacture: 2021 - Incl. Tiltator (infinite rotation) - Incl. Collector - Incl. OQ65 quick-change adapter plate Price: €25,000 net Bucket package: - Trenching bucket 800 mm Dcjdpjw E T S Rjfx Ab Tsr - Trenching bucket 1,000 mm - Hydraulic ditch cleaning bucket 2,000 mm Price: €5,000 net On request, we are happy to provide you with a leasing or financing offer. Mr. Mihm (tel. ) will gladly assist you. Further information is available on our website. Subject to change and prior sale!

Condition: new, Year of construction: 2025, functionality: fully functional, pallet changer: manual, Samzon MPT2000-15 Pallet Turner is equipped with the latest electronic and mechanical components. The traction group has a 2000w electrical engine. The oleo-dynamic group has a 3000w engine with an incorporated pump to obtain elevate operative times. Besides the forks are controlled by an electro-valve allowing the operator to handle their movements through simple switches over the control board. The gripper unit is made of a solid loom over there are rested on aluminum controls of polyzene runners with a high resistance and long duration. Beside the gripper is also equipped with a support surface for the paper, aligned and precise. The paper or any kind of palletizable material can also be lifted and turned over without pressure between the forks, leaving it up to the operator the choice regarding how to work. *Servo-steering – Easy movement of steering wheel. *Hydraulic locking-pawl for very easy handling of rotation. Dcedpfx Abow U R D Is Tjr

Condition: new, Year of construction: 2021, Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Simon Blank We offer here 25 new end stand elevators for sale. You can choose freely between the following material colors: (The material color must be specified when placing an order). - RAL 5010 Gentian blue - RAL 1018 Zinc yellow The scope of delivery includes: 25x end stand elevation, new Design: Universal Total height: 700 mm Useful height: 500 mm Telescopic: 600 - 1.150 mm depth Frame profile dim.: 45 x 45 mm angle Hole grid: 6 x 25 mm Hole diameter: 30 x 10 mm Weight: 6 kg / pc. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet Dcedpod Hu Auofx Ab Tsr (without unloading)

Condition: excellent (used), functionality: fully functional, Tennant Type: T7+ ec-H2O™ Compact design with high maneuverability Product description: Clean hard floors comfortably, nimbly, and economically: with the battery-powered Tennant T7+ ride-on scrubber-dryer. Thanks to its compact design, the ride-on machine is ideal for gaps and narrow aisles. The optional ec-H2O NanoClean technology reduces water and detergent consumption. Compact design – ideal for aisles and elevators. Clear sightlines and simple controls. Optimal water suction – no cleaning agent residue. Optional ec-H2O-Clean technology for reduced cleaning agent consumption. Easy-to-clean, hygienic tanks. Low noise level of 67 dB(A). Automatic brake and parking brake. Available in various working widths. Includes battery, on-board charger, and brush. Technical details: Area of application: Indoors. Battery operation: Voltage: 24 V. Battery type: Lead-gel battery. Battery capacity: 240 Ah/per unit. Frequency: 50-60 Hz. Speed: 6.4 km/h. Direction of travel: Reverse, forward. Noise level in dB(A): 67 dB(A). Removable fresh/dirty water tank. Fresh water tank volume: 110 l. Dirty water tank volume: 110 l. Theoretical area coverage: 5120 m²/h. Practical area coverage: 5120 m²/h Working width 800 mm Brush diameter 400 mm Brush speed 260 rpm Brush contact pressure 36 - 73 kg Brush motor power 450 W Brush-assisted drive no Brush shut-off automatic yes Tires material rubber Wheels number 3 Non-marking wheels yes Wheel width 80 mm Wheel diameter 250 mm Turning circle 1840 mm Operator cockpit yes Squeegee material Linatex Squeegee width 1000 mm Suction motor power 450 W Body color Teal Frame color Teal Height 1270 mm Width 740 mm Depth 1270 mm Weight 443 kg Version with ec-H2O™ Rim material Polyamide Dodjv Tvq Hjpfx Ab Tocr Condition: used / Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Year of construction: 2015, Tipper Tie TTChop 20 Cutter Dodpev Eamcofx Ab Tscr Based on more than 130 years of experience in design and a keen sense of innovation, the TTChop cutter generation TIPPER TIE sets new standards in grinding technology. TTChop20 combines functionality and advanced technology. This is an extremely versatile and yet specialized machine for each individual application. The production of raw coarse or fine sausages, tender boiled sausages or emulsions brings the same remarkable results as gentle mixing and dipping of a wide variety of components. Comes with a lot of extra knifesets. Manufacturer: Tipper Tie Model: TTChop 20 Year: 2015 Production Hours: 9.338 hours Capacity: 200 liter Max. load elevator: 250 kg. Power: 400V / 50Hz / 98kW Machine Dimensions LxWxH: 3.250x2.600x2.200 mm Machine Weight: 4.100 kg.

Condition: used, functionality: fully functional, Year of construction: 1991, Ammann MEA 160/240 asphalt mixing plant Base year 1991 Mixing tower complete Screening machine fully refurbished in 2024 -Drying drum with burner, year 2011 Dcjdjxyu A Repfx Ab Ter -Dedusting/filter unit Ammann, exhaustor, chimney, year 2011 -4 x bitumen tanks with thermal heating/pumps -RC addition -Elevated RC addition with drum -Discharge silo Ulrich -Ammann control system, year 2024

Condition: used, functionality: fully functional, Sawmill for sale: The line starts with a Bongioanni bandsaw and a Costa Multiprisma sawmill. Dsdpfx Abev Hm T So Tjcr Due to their design, they are suitable for processing both soft and hard hardwoods. The price includes the lines, additional machines (dust extraction, recycling machines) as well as the necessary saw blades and spare parts. The sawmill can be viewed in Cegléd, Hungary, by prior arrangement. Line 1: - 1-1 Log yard with single-sawn saw - 1-2 Costa Multiprisma: 280 two-axis prism saw with log turner, 60-80 m3/8 hours depending on the wood species and diameter - 1-3 Roller conveyor with discharger - 1-4 Custom-built cross-cut saw: for single-size cutting, with size adjustment option. - 1-5 Conveyor belts for transporting lump waste. - 1-6 Grinder (drum) - 1-7 Grinder conveyors: screw conveyor, bucket elevator, chute, direct loading onto wagon/truck 2nd line: - 2-1 Log store with splitter - 2-2 Log conveyor track, with drop-off - 2-3 Intermediate log store with splitter - 2-4 Bongioanni log splitting bandsaw and trolley, with 1300 digital control, multiple size presetting options, sheet deflection indicator, laser ruler, 25-45 m3/8 hours; depending on the type of wood, diameter and cut pattern - 2-5 Roller conveyor with ejectors - 2-6 Cross conveyor with singler - 2-7 Storti TGS-78 cutting saw: with digital control, three saw units for up to double the size of the cut - 2-8 Roller conveyor with graders - 2-9 Intermediate prism magazine - 2-10 Roller conveyor - 2-11 Costa Leopard II. series cutter, with 2-axis automatic feed and power control - 2-12 Roller conveyor with ejector and sorting table - 2-13 Conveyor belts for lump waste - 2-14 Grinder (drum) - 2-15 Grinder conveyors: screw conveyor, bucket elevator, rédlers (walking floor truck loading option) 3. Auxiliary machines: - 3-1 E. Gillet slitting band saw, associated conveyors, manipulator, feed mechanism - 3-2 Joiner's band saw (800) - 3-3 Pallet cube cutting machine (starboard) - 3-4 SOCOLEST Valdoi double edge circular saw, with conveyors, cutting circular saw - 3-5 VEB STANDARD single-axis formatting circular saw - 3-6 STVO single-axis formatting circular saw machine

Condition: excellent (used), Catalogue No.: 7810 TECHNICAL DATA max working width: 630 mm max working height: 110 mm 2 units: 1) grooved rubber roller for calibration 2) grooved rubber roller for calibration + pad + metal roller *from above: metal feed-in slip roller unit metal slip roller unit metal slip roller *from below: 2 metal slip rollers Dedpfx Absxwykbs Tocr feed belt 2 metal slip rollers pneumatic belt oscillation 2 feed speeds motor: 2×7.5 kW electric table elevation operating pressure: 6-8 bar extraction port diameter: 2x160 mm overall dimensions (L/W/H): 1650x1060x1970 mm weight: 972 kg – Polish manufacture – 2 units – unpainted – very good condition – used sander Net price: 25,900 PLN Net price: 6,160 EUR (at exchange rate 4.2 EUR) (Prices may fluctuate with significant currency changes)

Condition: used, Year of construction: 2005, functionality: fully functional, total width: 1,500 mm, total height: 1,900 mm, total length: 1,500 mm, working width: 950 mm, grinding width: 950 mm, grinding height: 140 mm, height adjustment type: electric, type of input current: three-phase, input voltage: 400 V, - Italian-made - Year of manufacture: 2005 - Not repainted - Used sander, in very good condition - European CE certificate Technical Specifications: Dcedpfsxwxr Djx Ab Tjr - Sanding width: 950 mm - Sanding height: 3 - 140 mm - Electric table elevation and lowering - 1 combination unit with sanding pad - Metal roller - Digital display - 2 feed speeds - Oscillation - Main motor power: 11 kW - Feed motor: 0.3 kW - Height adjustment motor: 0.25 kW - Original factory paint - Connection for 140mm extraction Machine dimensions: - Length: 150 cm - Width: 150 cm - Height: 190 cm - Weight ~670 kg