Used Elevator for sale (772)

Condition: reconditioned (used), Year of construction: 2008, required room height-300 cm Dimensions-1730x1500x1860 mm Power-7.35 kW Bath tub capacity-300 liters Amount of dough to be mixed-200 kg Amount of flour to be mixed-125 kg The mixer dumps into the distributor to the left or right Dump height-1860 mm Dedpfxskv Uz Ae Ab Tsla

Year of construction: 2024, condition: new, The fruit washer mill is made from stainless steel. Firstly, the operator of machine pours fruits and vegetables into the washing tub with clean water. Conveyor lifts the products up to the mill. During the lifting process, water nozzles spray the fruits and vegetables with clean water. The mill crushes the products after they reach the top of the conveyor. Finally, the fruit and vegetable mash comes out of mill. Capacity – 1000 kg/h. - The crushing head of the machine is round, so all the crushed mash goes directly out for further processing. This feature significantly helps when washing the head as there are no corners. - Our round shape technology is superior to other producers’, because a lot of fruit mash gets stuck in the corners of square-shaped heads for hours and can cause juice fermentation! - Machine has additional table in front of the basin for putting fruits or boxes on it. It facilitates the process of pouring the products into the basin. - V form washing basin helps fruits and vegetables move directly to the conveyor, therefore less fruit stay in the basin. Integrated water-spraying system provides additional washing when lifting the fruits up the conveyor. - Belt conveyor has a water drainage and speed regulation system. - The speed of the belt conveyor is adjustable in the control panel. - Optional replaceable cutting graters/sieves are available for different fruits and berries. - The mill does not damage the fruit seed. - Machine is easy to clean after using. - Powerful 2.2 kW crushing engine can crush various fruits, berries and vegetables – from soft raspberries to hard apples, beets, etc. Dodpfsflpfbex Ab Tela - Machine is entirely made of stainless steel.

Year of construction: 2020, condition: new, The fruit is poured into the washing container where it undergoes initial cleaning. Afterwards, the elevator transports the fruit towards the grinder, where it is cleaned with water using flat stream nozzles. The conveyor belt speed can be controlled with a potentiometer. Cleaned fruit is forwarder into the grinder where it is crushed and ready for further processing. TECHNICAL DATA Output 1000 kg/h Installed capacity 3,5 kW 230/400V Djdpfofgir Dex Ab Tjla Weight 300kG

Condition: excellent (used), Year of construction: 2019, We now have 13 SSI Schaefer SLL LogiMat Vertical Lift Modules from 2019 available for sale. These machines are in very good condition and have been serviced every year by the manufacturer since they were installed. Thanks to this regular maintenance and careful use, the machines are still very reliable. Dljdpfx Ajwi Iywob Tsa These Vertical Lift Modules are designed to provide maximum storage in a small space. Tray size: 4.025 mm wide × 815 mm deep Tray area: About 3.3 m² Number of trays per machine: Around 49 Total storage area per machine: About 160 m² Floor space used per machine: Only 14.12 m² Each machine includes an optional light pointer, which shows exactly where to pick items. This helps make order picking faster and safer. To use the light pointer, the machine must be connected to an ERP or WMS system. The machines have only run about 30,000 to 60,000 cycles each – about 1 to 2 years of normal use. The height of the machines is 8,200 mm, but they can be adjusted to fit your warehouse ceiling during installation. Specifications – SSI Schaefer LogiMat SLL Vertical Lift Module Manufacturer: SSI Schaefer Model: LogiMat SLL 4025-815-8200/400 Year of Manufacture: 2019 Condition: Very good - serviced annually by the manufacturer Number of Units Available: 13 Height: 8,200 mm Width (Machine / Tray): 4.570 mm / 4.025 mm Depth (Machine / Tray): 3.092 mm / 815 mm Floor Space Used per Unit: 14.12 m² Number of Trays per Unit: Approx. 49

Year of construction: 2000, condition: used, Roofing elevator / plug-in elevator Böcker ES13B year 2000 with drive motor 1,5 kW length 13 meters payload 200 kg with or without car trailer Dledpsn Hxz Tsfx Ab Tsa immediately available Location: Austria, near Vienna

Condition: used, FAS Vertical conveyor box elevator 4770x950x1200 RA2400 Make: FAS Direction of travel: the elevator can be accessed from both sides Vertical transport height: Flexible adjustment of input and output levels and also intermediate levels Maximum size of transported goods: 850x380xXXX mm LxWxH Overall height: 4770 mm Frame width (NB): 950 mm Frame depth: 1200 mm Height of feet: 75 mm Motor : SEW motor 380-500V Disassembled into two parts 2400x950x1200mm Scope of delivery: including supports, side guides, light barriers, terminal box Optionally available: Frequency converter Height adjustment Leading and trailing conveyor technology Control system Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. Dlodpowdbqlsfx Ab Tsa With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: new, STAPRO lifts specializes in the development, production, and installation of goods lifts. A professional goods lift from STAPRO is the best way to move your goods efficiently and safely. - Various models, fully customized and produced to customer specifications in the Netherlands. - Self-supporting shaft or column construction possible. - Finish options include safety mesh or solid paneling. - Lifting capacities from 500kg up to 5,000kg. - Lifting heights up to 12 meters. - Option for accompanied transport with type certification by TUV. The goods lifts are produced by STAPRO in the Netherlands, including CE marking, documentation, and warranty. Dlodpfxegbun Tj Ab Toa All goods lifts can be installed and maintained by STAPRO throughout Europe. Enquire about the possibilities or request a non-binding quote.

Year of construction: 2024, condition: new, The fruit washer elevator mill is made from stainless steel. Firstly, the operator of the machine pours fruits and vegetables into the washing tub with clean water. Conveyor lifts the products up to the mill. During the lifting process, water nozzles spray the fruits and vegetables with clean water. The mill crushes the products after they reach the top of the conveyor. Finally, the fruit and vegetable mash comes out of mill. Capacity – 3000 kg/h. - The crushing head of the machine is round, so all the crushed mash goes directly out for further processing. This feature significantly helps when washing the head as there are no corners. - Our round shape technology is superior to other producers’, because a lot of fruit mash gets stuck in the corners of square-shaped heads for hours and can cause juice fermentation! - Machine has additional table in front of the basin for putting fruits or boxes on it. - V form washing basin helps fruits and vegetables move directly to the conveyor, therefore less fruit stay in the basin. Integrated water-spraying system provides additional washing when lifting the fruits up the conveyor. - Belt conveyor has a water drainage and speed regulation system. - Optional replaceable cutting graters/sieves are available for different fruits and berries. - The mill does not damage the fruit seed. Dedpfx Abeflpmke Tsla - Powerful 4 kW crushing engine can crush various fruits, berries and vegetables – from soft raspberries to hard apples, beets, etc. - Machine is entirely made of stainless steel and easy to clean after using.

Condition: excellent (used), Year of construction: 2020, Lödige ESCORTA goods elevator ESCORTA goods elevator for the safe and efficient transportation of goods and people Several people are now allowed on board The ESCORTA is the ideal solution for overcoming height differences in warehouses and production facilities. Thanks to the new certification (type-tested in accordance with the European Machinery Directive 2006/42/EC), several people can simultaneously accompany the load in the lift cabin on its way to the desired floor. This upgrade option increases comfort and makes the transportation of goods between different levels much easier and more pleasant. The warehouse elevator can be easily integrated into existing buildings and racking systems and does not require a separate machine room or wall shaft. The pit depth required is very low or can be avoided altogether by using a drive-on wedge. Manufacturer: Lödige Industries Escorta goods elevator Type: MEK-1 Year of construction: 2020 Load capacity: 2000 kg Number of persons: 26 2 floors (ground floor/1st floor/2nd floor) Floor height: 2,500 mm Double wing door Floor area: 2,800 x 2,700 mm Internal dimensions: 2,000 x 2,400 mm Total height: approx. 7,700 mm Assembly height: on the 2nd floor: 2,700 mm Dljdsv Hqmpspfx Ab Tea Dismantling and removal must be carried out by the buyer. Location: 63762 Großostheim You can find more items - new and used - in our store! International shipping costs on request!

Condition: excellent (used), Year of construction: 2019, For sale: 14 Kardex Megamat RS 350 vertical carousels in excellent condition. These machines have been meticulously maintained with annual servicing and have been used exclusively in a clean and light-duty environment. They are available for individual purchase or in packages of 2, 4, 6, 8, or all 14 units. The collection includes 6 units manufactured in 2018 and 8 units from 2019, offered in two height options: 6,585 mm and 7,110 mm. Each vertical carousel is configured with either 21 or 23 carriers, providing between 42 and 49 shelves per unit. A detailed description of the shelf configurations can be provided upon request. All units feature the optional "Matrix Strip," an LED guidance system installed at the access point. This system highlights the picking location laterally and displays product information, though ERP or WMS integration is required to fully utilize its capabilities. Please note that the boxes shown in images are not included. Specifications: Manufacturer: Kardex Remstar Model: MEG RS 350.1.3050.6.533.21 / MEG RS 350.1.3050.6.533.23 Djdpfx Asvgdkbjb Tela Manufacturing Year: 6 units from 2018, 8 units from 2019 Height (Vertical Carousel / Carrier): 6,585 mm & 7,110 mm with a free storage height of approximately 470 mm Width (Vertical Carousel / Carrier): 3,675 mm / 3,050 mm Depth (Vertical Carousel / Carrier): 1,671 mm / 628 mm Number of Carriers / Shelves: 21 or 23 carriers with 42-49 shelves Maximum Weight per tray: 228-350 kg, depending on the number of shelves installed Electronics: 3/N/PE 400V For further details or inquiries, please don't hesitate to get in touch.

Condition: like new (used), Year of construction: 2016, functionality: fully functional, total height: 11,000 mm, total width: 2,350 mm, total length: 11,395 mm, load capacity per storage section: 35 kg, load capacity: 49,560 kg, For SALE 6 pieces!!! KARDEX Vertical Buffer Module LR35® Machine Type: LR-35-19x400x600x11000 Machine height: 11,000 mm Required installation height: 11,050 mm Machine length: 11,395 mm Machine width: 2350 mm Storage segments: 19 pieces Bin width: 400 mm Bin depth: 600 mm Max. load (calculated per Bin): 35 kg Machine surface (without "turntable"): 23.49 m² Machine surface (incl. "turntable"): 26.77 m² Dedpfewqp Npsx Ab Tela Permitted total weight: 59,492 kg Permitted total load: 49,560 kg Empty weight (without Bins): 11,415 kg Speed x-axis: max. 3 m/s Speed y-axis: max. 3 m/s Safety intermediate distance: 60 mm Storage grid 25 mm Permitted ambient temperature in operation: +5° - +40° Permitted relative humidity: 85% Year of Build: 2016 Machinehandel De Leeuw BV is one of the few companies in Europe that trades and has in stock mainly used Kardex Remstar VLM automatic Lift (Shuttle systems) & rotating warehouse systems (paternoster systems). See our website for the current stock. We assemble and/or disassemble these systems in a safe manner with VCA certified technicians and we have been doing this for more than 33 years. We also disassemble other brands such as: Hänel, Electrolux, Bertello, Megamat, Lista, Denocard Machinehandel De Leeuw BV Oordeelsestraat 7–b 5111 PA Baarle-Nassau TheNetherlands Email: info at deleeuw-machinehandel.nl

Condition: new, Offered is a new ELBA elevator bucket, 2 m³, track width: 2.08 m. Dlodpfxsv Tb Eps Ab Toa

Condition: like new (used), Year of construction: 2013, functionality: fully functional, total height: 7,385 mm, total width: 1,471 mm, total length: 3,275 mm, 8 Kardex Megamat RS 350 vertical carousels in excellent condition. Dedpfx Abjv Svmrs Tsla The installation includes 8 units manufactured between 2013 and 2018. Available in three height options: 7185 mm, 7384 mm, and 7585 mm. Each vertical carousel is configured with 34, 35, or 36 trays. For more details or inquiries, please do not hesitate to contact us.

Condition: new, Electric scissor lift 6.52 M Dljdpfonbd Izjx Ab Tea max. working height: 6.52 m max. platform height: 4.52 m Total width: 0.81 m Platform length: 1.65 m Platform width: 0.81 m Extendable platform: 900 mm Rated lifting capacity: 280 kg Battery: 24V DC (4 x 6V225Ah) Operating weight: 1240 kg

Condition: used, We are offering a new goods lift or scissor lift table. We have installed one ourselves and it can be viewed. Dlsdpovrvmlefx Ab Tea The heavy-duty lift table is fully ready for acceptance - we can coordinate the installation and acceptance on request. Can be controlled with lift buttons or remote control. Usable height 5900 mm Lifting height 4700 mm Size: 2500 x 4000 mm Motor: 5.5 kW Load capacity 4000 kg With many safety precautions and 2 meter high walls - meets all requirements for acceptance New and unused Prices subject to change, errors, printing and typesetting errors reserved

Condition: excellent (used), Year of construction: 2012, One Modula Lift ML 50D for sale. The Vertical Lift Module has been regularly serviced by the manufacturer since it was installed and is in great condition. The trays have a width of 4,100 mm and a depth of 860 mm, providing 3.53 m² of storage space per tray. With 50 trays, the total storage area is 176.5 m². Each tray can hold up to 500 kg, giving a total capacity of 25,000 kg for all 50 trays. The Vertical Lift Module is located in a protected area with a mezzanine, which has helped keep the cladding and exterior in excellent condition. Specifications: Dedpov Uxrvsfx Ab Tela Manufacturer: Modula Year of Manufacture: 2012 Model: Modula Lift ML 50D Height: 6,200 mm Width (Vertical Lift Module / Tray): 4,500 mm / 4,100 mm Depth (Vertical Lift Module / Tray): 3.058 mm / 860 mm Number of Trays / Tray Height: About 50 trays / 120 mm high edge Maximum Weight per Tray: 500 kg Electronics: 400 V, 20 A

Condition: used, Year of construction: 2003, functionality: fully functional, total height: 7,050 mm, total width: 3,380 mm, total length: 3,074 mm, load capacity per storage section: 205 kg, input voltage: 400 V, only 2 left in stock Automated warehouse optimization storage system KARDEX Shuttle XP500 System Type : SHUTTLE-XP-500-3050x864 Control : C2000, with B/W OP2000 display Serial No. : 03007559 Year of construction : 2003 Load per tray : Medium : 205 kg (evenly distributed) (heavier trays can be ordered) Tray dimension : 3050 x 864 mm Number of tray's : 36 pieces (more on request) Dimensions Shuttle W x D x H : 3380 x 3074 x 7050 mm (height Kardex is adjustable to available height) Power : 3/N/PE400 V , 12 A , 50/60 HZ , 4,9 kVA This offer is valid if system is unsold Technical details each Shuttle: - Maximum total capacity of the KARDEX Shuttle XP : 2 x 33.900 kg - Maximum tray capacity : 36 tray's : 205 kg each, evenly distributed, More and/or heavier trays can be ordered. - Tray dimensions: 3050 x 864 mm - Machine dimensions: Wide x Depth x Height: 3380 x 3074 x 7050 mm - Footprint of the system appx: 10.39 m2 - Electronic volume measuring system in 25 mm screen (grid) - An access opening with sliding doors to protect people and stored goods - Control C2000, with B/W OP2000 display - Anti-dazzle lighting above access point - Use of toothed belt for minimum noise - Use of toothed-belt for fastest order picking We do need a minimum passage of 3500 mm wide and 3500 mm high to the place where the Kardex will be located. Price: On request only by e-mail Price: excl. VAT, including transport and assembly Delivery time: from stock Machinehandel De Leeuw BV is one of the few companies in Europe that trades and has in stock mainly used Kardex Remstar automatic Lift & rotating warehouse systems. See our website for the current stock. We assemble and/or disassemble these systems in a safe manner with VCA certified technicians and we have been doing this for more than 30 years. We also disassemble other brands such as: Hänel, Electrolux, Bertello, Megamat, Lista, Denocard Machinehandel De Leeuw BV Oordeelsestraat 7 – b 5111 PA Baarle-Nassau The Netherlands Dledpfxownan Do Ab Tja

Condition: reconditioned (used), Year of construction: 1996, machine/vehicle number: 6672311, BM5141 Polar Mohr stacking lift L-1000-W-6 => reconditioned for ergonomic working at user-friendly working height Technical data Tub size 1000 x 1450 mm Dsdpfotgupcex Ab Tola Lift max. 850 mm Load capacity max. 1.000 kg A sensor controlled lifting of the material enables the operator to handle the material at an ergonomically favourable working height, placing it into an automatic jogger or directly into the cutting machine. The stacking lift can also be used for de-stacking the the cut-material. The material is lowered semi-automatically. This means that the process is started manually and stopped automatically. POLAR stacking lift need not be anchored to the floor and is therefore flexible in its deployment. Customer benefits: - The productivity of the cutting machine is increased by up to 10%, as the working height during loading/unloading remains constant - Lifting of heavy loads is minimised - The operator's performance curve remains constant - Occupational illnesses are significantly reduced

Condition: used, Year of construction: 2007, functionality: fully functional, total height: 5,980 mm, total width: 3,380 mm, total length: 3,074 mm, load capacity per storage section: 460 kg, input voltage: 400 V, Automated warehouse optimization storage system KARDEX Shuttle XP500 System Type : SHUTTLE-XP-500-3050x864 Control : C2000, with B/W OP2000 display Serial No. : 07006421/001 Year of construction: 2007 Total Load: 2x33,500 kg Load per tray: 460 kg (proportionally distributed) Tray dimensions: 3050 x 864 mm Number of trays: 32 pieces (more on request) Dimensions Shuttle W x D x H: 3380 x 3074 x 5980 mm (height Kardex is adjustable to available height) Djdpfewnankox Ab Tjla Dimensions Shuttle D with full tray extraction table: 4198 mm Power: 3/N/PE400 V, 17 A, 50/60 HZ, 8.6 kVA This offer is valid provided system is unsold Technical details each Shuttle: - Maximum total capacity of the KARDEX Shuttle XP: 2 x 33,500 kg - Maximum tray capacity: 32 trays Medium evenly distributed, more trays can be ordered. - Tray dimensions: 3050 x 864 mm - Machine dimensions: Wide x Depth x Height: 3380 x 3074 (4198) x 5980 mm - Footprint of the system appx: 14.19 m2 - Capacity with 32 trays: appx. 84 m2, every tray is appx. 2.64 m2 - Electronic volume measuring system in 25 mm screen (grid) - An access opening with sliding doors to protect people and stored goods - Control C2000 with graphic display OP-C2000 B/W - LED anti-dazzle lighting above access point - Use of toothed belt for minimum noise - Use of toothed-belt for fastest order picking - Distances can be realized in steps of 25mm by arranging the support profile. a prerequisite for high compression storage - Automatic full tray extraction table Price: On request only by e-mail Price: excl. VAT, including transport and assembly Delivery time: from stock Machinehandel De Leeuw BV specializes in used machines and accessories for the machining industry and used paternoster systems from Kardex, Hanel / Haenel, Electrolux, Bertello, Megamat, Lista, Denocard and automatic storage systems such as the Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Oordeelsestraat 7 – b 5111 PA Baarle-Nassau The Netherlands

Condition: used, Year of construction: 2011, functionality: fully functional, total height: 8,550 mm, total width: 3,380 mm, total length: 3,074 mm, load capacity per storage section: 460 kg, input voltage: 400 V, 14 pieces Kardex Shuttles XP 500 of 8550mm Heights on stock Automated warehouse optimization storage system KARDEX Shuttle XP500 System Type : SHUTTLE-XP-500-3050x864 Control : C3000, with OP3000 OPGraphic color display Serial No. : 11002214 Year of construction: 2011 Total Load: 2 x 33,500 kg Load per tray: MediumX: 460 kg (proportionally distributed) Tray dimensions: 3050 x 864 mm Number of trays: 32 pieces (more trays on request) Dimensions Shuttle W x D x H: 3380 x 3074 x 8550 mm (height Kardex is adjustable to available height) Power: 3/N/PE400 V, 11 A, 50/60 HZ, 4.9 kVA This offer is valid provided system is unsold Dodswnamyepfx Ab Tjla Technical details each Shuttle: - Maximum total capacity of the KARDEX Shuttle XP: 2 x 33,500 kg - Maximum tray capacity: 32 trays MediumX: 460 kg each, evenly distributed, more trays can be ordered. - Tray dimensions: 3050 x 864 mm - Machine dimensions: Wide x Depth x Height: 3380 x 3074 x 8550 mm - Footprint of the system appx: 10.39 m2 - Capacity with 32 trays: appx. 84 m2, every tray is appx. 2.64 m2 - Electronic volume measuring system in 25 mm screen (grid) - An access opening with sliding doors to protect people and stored goods - Control C3000, with OP3000 OPGraphic color display - LED anti-dazzle lighting above access point - Use of toothed belt for minimum noise - Use of toothed-belt for fastest order picking - Distances can be realized in steps of 25mm by arranging the support profile. a prerequisite for high compression storage Price: On request only by e-mail Price: excl. VAT, including transport, assembly and warranty Delivery time: from stock Machinehandel De Leeuw BV is one of the few companies in Europe that trades and has in stock mainly used Kardex Remstar VLM automatic Lift & rotating warehouse systems. See our website for the current stock. We assemble and/or disassemble these systems in a safe manner with VCA certified technicians and we have been doing this for more than 30 years. We also disassemble other brands such as: Hänel, Electrolux, Bertello, Megamat, Lista, Denocard Machinehandel De Leeuw BV Oordeelsestraat 7 – b 5111 PA Baarle-Nassau The Netherlands

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, total height: 9,350 mm, total width: 3,980 mm, total length: 3,074 mm, load capacity per storage section: 380 kg, input voltage: 400 V, 3 pieces in stock Automated warehouse optimization storage system KARDEX Shuttle XP500 System Type : SHUTTLE-XP-500-3650x864 Control : C3000, with B/W OP3000 display Serial No. : 06009822 Year of construction: 2006 Load per tray: MediumX: 380 kg (proportionally distributed) Tray dimensions: 3650 x 864 mm Number of trays: 48 pieces (more on request) Dimensions Shuttle W x D x H: 3980 x 3074 x 9350 mm (height Kardex is adjustable to available height) Dedpswgyxtsfx Ab Tsla Power: 3/N/PE400 V, 17 A, 50/60 HZ, 8.6 kVA This offer is valid provided system is unsold Technical details each Shuttle: - Maximum total capacity of the KARDEX Shuttle XP: 2 x 32,700 kg - Maximum tray capacity: 48 trays: 380 kg each, evenly distributed, More trays can be ordered. - Tray dimensions: 3650 x 864 mm - Machine dimensions: Wide x Depth x Height: 3980 x 3074 x 9350 mm - Footprint of the system appx: 12.23 m2 - Capacity with 48 trays: appx. 151 m2, every tray is appx. 3.15 m2 - Electronic volume measuring system in 25 mm screen (grid) - An access opening with sliding doors to protect people and stored goods - Control C3000, with B/W OP3000 display - LED Anti-dazzle lighting above access point - Use of toothed-belt for minimum noise - Use of toothed-belt for fastest order picking Price: On request only by e-mail Price: excl. VAT, including transport, assembly and warranty Delivery time: from stock Machinehandel De Leeuw BV is one of the few companies in Europe that trades and has in stock mainly used Kardex Remstar VLM automatic Lift & rotating warehouse systems. See our website for the current stock. We assemble and/or disassemble these systems in a safe manner with VCA certified technicians and we have been doing this for more than 30 years. We also dismantle other brands such as: Hänel, Electrolux, Bertello, Megamat, Lista, Denocard Machinehandel De Leeuw BV Oordeelsestraat 7 – b 5111 PA Baarle-Nassau The Netherlands

Condition: good (used), Year of construction: 2006, lifting height: 7,625 mm, fuel type: electric, OM – CE Narrow Aisle Order Picker • Lifting Height: 7,625 mm • Power Source: Electric • Maximum Capacity: 1,000 kg Dljdpovxvzpjfx Ab Tja

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Loading system for pallet boxes onto drums on rails Brand Inox Meccanica s.r.l. Model: ELEVATORI PER CONTENITORI Serial number: 2853 Year of construction: 2018 Power 5.5 kW Voltage 400 V, 50 Hz Weight: 1800 kg Maximum dimensions of pallet boxes: 1200 mm x 1000 mm x 800 mm Lifting height: 3600 mm Dledpfxewa Dtbs Ab Tsa Maximum lifting capacity: 600 kg Overall dimensions of the loading system: 3400 mm x 2200 mm x 4000 mm Length of rails: 17500 mm

Condition: used, San Cassiano ER2 bowl lift for San Cassiano DF300 bowls Dedpsiv Ak Hjfx Ab Tsla including automatic bowl rotation, scraping system lifting height aprox. 220cm total height 320cm Pictures BEFORE reconditioning

Condition: new, 🔹 Quick Description of the 7 Elevators for Sale • Manufacturer: ThyssenKrupp (TK Elevator) • Models: Evolution Blue (L1–L2) and BO61 (L3–L7) • Quantity: 7 passenger elevators L1 – Evolution Blue • 1600 kg, 2.5 m/s, 28 stops, 104 m travel • Machine-room-less, high-capacity L2 – Evolution Blue • 1100 kg, 1.75 m/s, 6 stops, 17 m travel • Compact machine-room-less unit L3–L6 – BO61 (x4 units) • 900 kg each, 3 m/s, 26 stops, 104 m travel • Rope-driven with machine room • High-speed mid-capacity models L7 – BO61 • 900 kg, 3 m/s, 26 stops, 104 m travel • Same system as L3–L6, with slightly different car dimensions ⸻ ✅ In total: • 2 Evolution Blue elevators (1100–1600 kg) • 5 BO61 elevators (900 kg each) • All modern, rope-driven passenger lifts designed for mid/high-rise use. Dlsdpfx Aow R H Sasb Tja