Used Electrospindle for sale (224)

Condition: new, Year of construction: 2026, Technical data Control system: Multi-axis real-time interpolator, with active trajectory forecasting, LAN communication, EtherCat, 2ms sampling time, optional RTCP tool end tracking, correction map. Working area: X 600 x 900 mm Y 3000 x 12000 mm Gate clearance and Z axis range: 100-1000 mm Drive system: Omron servo drives with EtherCat protocol, X, Y helical slats hardened ground in accuracy class 6, Z axis ball screw with accuracy class 5 Linear bearing: Trapezoidal rails, Bosch Rexroth 25 Speed: Up to 120 m / min Acceleration: Up to 1G Program resolution: up to 0.0001mm Positioning accuracy: 0.01 mm Gate drive: double-sided master / slave with gate angle correction Electrospindles: 2 kW to 36 kW powered by an inverter Tool taper: ISO30 lub HSK63 ER32 Maximum speed of the electro-spindle: 24,000 rpm (option 6,000, 40,000, 50,000) Construction: Steel welded, ribbed, stress relieved, precision machined Equipment options positioning and correction of the material by means of a camera, laser, measuring probe linear, revolver tool magazine cooling the tool with mist, chilled air 3D laser or touch scanner Nodpfx Aen Hq Hushvocp positioning databases additional angular / rotary axes drilling units, angular active oscillating knife, roller knife, drag knife, creaser, marker pen pneumatic clamping clamps chip extraction installation integration with an industrial robot Table type: T-slot: aluminum profiles, solid aluminum, solid steel; vacuum; hybrid, pneumatic clamping clamps

Condition: new, Year of construction: 2026, Technical data: Control system: multi-axis real-time interpolator with active trajectory prediction, LAN and EtherCat communication, sampling time below 2 ms, correction map, RTCP, remote service access. Njdpfxju U Hnao Ahvocp Working area: 2100 x 3100 mm (optionally 2100 x 4100 mm) Z-axis clearance: 100 – 300 mm Drive system: servo drives with EtherCat protocol, X and Y axes with hardened, helical ground racks, accuracy class 6; Z-axis with ball screw, accuracy class 5. Linear bearings: trapezoidal rails Rapid traverse speed: up to 80 m/min Software resolution: 0.0001 mm Positioning accuracy: 0.01 mm Gantry drive: dual-side master/slave with gantry angle correction Electrospindles: 8 kW to 36 kW, inverter-driven Tool holder taper: ISO30 or HSK63 ER32 Maximum spindle speed: 24,000 rpm Construction: welded, ribbed, stress-relieved steel, precision machined Table type: vacuum Equipment options: - Material positioning and correction via camera, laser, or measuring probe - Revolver-type tool magazine - Tool cooling by oil mist or chilled air - 3D scanner (laser or touch probe) - Positioning bases - Drilling units, angular heads - Active oscillating knife, circular knife, drag knife, creasing tool, pen, knife - Electric and pneumatic options - Chip extraction system - Pneumatic sections - Printer, barcode reader - CAD/CAM software for furniture, cabinetry, and front design - Automatic central lubrication #ploter #CNC #router #millingrouter #machiningcenter #3axis #4axis #5axis #3D #3Dprint #MDF #HPL #Plywood #chipboard #steel #aluminium #aluminum #brass #stainlesssteel #castiron #polypropylene #polycarbonate #acrylic #fermacell #BLUM

Condition: new, Year of construction: 2026, Technical data: Control system: Multi-axis real-time interpolator with active trajectory prediction, LAN and EtherCat communication, sampling time below 2 ms, RTCP, remote service access. Working area: X: up to 6300 mm; Y: up to 1100 mm Z-axis clearance: 200 – 400 mm Drive system: Servo drives with EtherCat protocol; X, Y axes with hardened and ground helical racks, accuracy class 6; Z axis with ball screw, accuracy class 5. Linear guides: Trapezoidal rails; Y-axis double guide size 35; X and Z axes double guide size 25. Travel speed: up to 60 m/min Gantry drive: Single-sided Software resolution: up to 0.0001 mm Positioning accuracy: 0.01 mm Electrospindles: 12 kW to 25 kW, inverter-driven Tool taper: HSKF63 Maximum electrospindle speed: 24,000 rpm (options for 6,000 / 40,000 / 50,000 rpm) Construction: Welded, ribbed, stress-relieved and precision-machined steel structure Table type: Console type, pneumatic vises Equipment options: - Swiveling/rotary head - Additional angular/rotary axes - Angle aggregates - Material positioning and correction via camera, laser, measuring probes - Revolver-type tool magazine - Beams moved automatically or manually - Vises moved automatically or manually - Pneumatic clamps - Tool cooling by oil mist or freezing nozzle - Automatically operated extraction base - Integration with industrial robot - Compensation mapping - Chip conveyor - 3D CAD/CAM software #ploter #CNC #millingrouter #machiningcenter #3axis #4axis #5axis #3D #3Dprint #MDF #HPL #Plywood #chipboard #steel #aluminum Nsdsvyrhbjpfx Ahvjcp #brass #stainlesssteel #castiron #polypropylene #polycarbonate #acrylic #fermacell

Condition: new, Year of construction: 2026, Technical data: Control system: Multiaxis real-time interpolator with active trajectory prediction, LAN communication, EtherCat protocol, sampling time under 1ms, correction map, RTCP, remote service access. Working area: 1500 – 3000 x 2100 – 12000 mm Z-axis clearance: 500 – 1200 mm Drive system: Omron servo drives with EtherCat protocol, X and Y axes equipped with helical, hardened and ground racks, precision class 6; Z axis with ball screw, precision class 5. Linear bearings: Bosch Rexroth 35 Travel speed: X, Y axes up to 45 m/min; C, A axes up to 6000 degrees/min Software resolution: 0.0005 mm Positioning accuracy: 0.01 mm Ncedpfx Ahjtz Sgievep Gantry drive: Dual-sided master/slave configuration with gantry angle correction Electrospindle: 8 kW to 36 kW Print heads: - G.12 with throughput up to 12 kg/h - G.20 with throughput up to 20 kg/h - G.50 with throughput up to 50 kg/h - G.200 with throughput up to 200 kg/h Maximum spindle speed: 24,000 rpm (options for 6,000, 40,000, or 50,000 rpm) Construction: Welded, ribbed, stress-relieved, and precision machined steel frame Table type: Vacuum, hybrid, steel T-slot, aluminum T-slot, aluminum vacuum with M16 or M18 holes Optional features: - Tool cooling - Linear or rotary tool magazine - Rotary axis on the table - Laser scanner - Positioning bases - Oscillating unit - 5-axis software package Granulate 3D printers can process a wide range of thermoplastics, such as PLA, ABS, PETG, polyamides, or polypropylene. #ploter #CNC #millingrouter #machiningcenter #3axis #4axis #5axis #3D #3Dprint #MDF #HPL #Plywood #chipboard #steel #aluminium #aluminum #brass #stainlesssteel #castiron #polypropylene #polycarbonate #acrylic #fermacell #BLUM

Condition: ready for operation (used), IMA Omlat electrospindle 7.5kW 305/308V~ with constant power from 12,000 to 24,000 rpm, Art./Material No.: 140084, Drawing 06058, used, good condition, 100% functional, scope of delivery as per photos. Nsdox Dw D Ejpfx Ahvocp

Condition: used, machine/vehicle number: 007716, X axis working area: 3250 mm Y axis working area: 1220 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Nodpfxjwuz N Ne Ahvscp Number of controlled axes: 4 axes Total number of drilling spindles: 18 Total number of tool changer positions: 16

Condition: good (used), Year of construction: 2019, CNC machine with fixed table and dual drive gantry, five axis interpolating electrospindle. Particularly suitable for SIPS panels, woodworking, plywood, MDF, plastics and thermo formed prodcuts. 6120mm x 1605mm Working field in X / Y axis 6850mm X axis stroke 1970mm Y axis stroke 1080mm Z axis stroke Max height / panel passge 700mm C axis rotation + / - 360 degrees 12kw electrospindle with programmable speeds from 500 - 22,000 rpm 12 Position automatic toolchanger Auxiliary 2 position toolchanger Ncjdpfjvpv Nbex Ahvsp 250m3/hr vacuum pump 2 Field phenolic working table suitable for vacuum cups Hoist points to fix jigs [ series of threaded holes on table for mechanical fixing ] Set of 3 disappearing stops OSAI Series 10 CNC control including [ for example ] PC with Windows XP [ or higher ] Interactive programming Paramteric programming 3D interplolation Cutter radius compensation Extraction requirements 2200m3/hr Weight 5235kg Year - 2019 CE FULL ORIGINAL SPECIFICATION SHOWN IN IMAGES

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Morbidelli M800 X5 machining center Ncsdpfxex I A Aqj Ahvjp X working field: 6360 Y working field: 1680 Z working field: 350 5-axis electrospindle with liquid cooling, 13 kW – HSK 63F Tool magazine disc moving on X-axis, 48 tool positions Processing unit with Vector 360° axis 1 cutting saw blade 1 vertical outlet for milling 3 vertical outlets for drilling 3 vertical outlets for handle holes 2 horizontal outlets for milling 2 horizontal outlets for drilling CE safety system with bumpers CNC PC-Office control with integrated computer 3D programming system WOP XILOG-MAESTRO 250 m³/h vacuum pump Available December 2026.

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, workpiece length (max.): 3,200 mm, workpiece width (max.): 200 mm, workpiece height (max.): 130 mm, TECHNICAL DETAILS Workpiece Dimensions Max. workpiece length: 3,200 mm Min. workpiece length: 200 mm Max. workpiece thickness: 130 mm Min. workpiece thickness: 30 mm Max. workpiece width: 200 mm Min. workpiece width: 30 mm Tenoning Carriage Tenon length at max. tenoning diameter: 320 mm Tenoning carriage speed: 0 - 40 m/min Profiling speed: 4 - 20 m/min Table height for profiling: 850 mm Feed roller diameter: 100 mm Distance between feed rollers: 150 mm Crosscut Saw Motor power: 4 kW Speed: 3,000 rpm Spindle diameter: 40 mm Max. tool diameter: 400 mm Milling Unit for Tenoning Nodexx Un Rjpfx Ahvjcp High-performance spindle with upper bearing: Diameter 50 mm, length 620 mm Motor power: 7.5 kW Speed: 3,500 rpm Max. tool diameter: 320 mm Axis travel below work table: 575 mm Milling Unit for Profiling Spindle: 50 x 320 mm Motor power: 7.5 kW Speed: 6,000 rpm Min./max. tool diameter: 130 - 250 mm Spindle Speed: 1,000 - 12,000 rpm Max. motor power: 11 kW Max. tool diameter: 230 mm Tool positions: 24 Max. weight per tool: 10 kg EQUIPMENT Automatic chip protection Jolly Automatic brake RAPID 24 automatic tool changer Fast vertical adjustment via brushless motors Water cooling for electrospindle Vector rotary axis for 360° electrospindle rotation Note: Further technical details can be found in the attached document!

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: N1A665853, tool weight: 30,000 g, input voltage: 400 V, Machining center Rumba -4 axes Machining length 4000 mm Ppsbtxbqohywz So H Ijr CNC controlled machining center with vertical machining spindle, suitable for machining extruded aluminum profiles, light metals, PVC and steel from 3 sides. Controlled tilting work table: -90°/0°/+90° with intermediate angles. The machine is equipped with a 4Kw, 18000 rpm electrospindle, controlled by an inverter and a quick tool changer (tool changer) with an ISO30 spindle. Interpolation of the X, Y, Z and W axes controlled numerically. Brushless motors for positioning the X, Y, Z and W axes. Complete with 4 pneumatic double clamps, tool diameter correction by software. Axis movements on linear guides. Left profile stop. 10.4-inch color monitor (touch screen with simplified Windows-based graphics, Teamviewer for remote maintenance, special software HICAM 2 / CAMPROX for loading ISO files and running programs). Possibility to edit longer parts. Standard equipment: 4kw ISO30 electrospindle 4 pneumatic clamps (manually adjustable) Safety cover Automatic tool changer (10 tools) 4x ISO30 cone included with the tool 3x chip collection compartments air nozzle Nsdpfx Ajwgm Ibshvscp Technical data: X-axis stroke 3000 mm / 4000 mm Y-axis stroke 400 mm Z-axis stroke 300 mm Rapid traverse (X, Y, Z): 50 m/1' Acceleration (X, Y, Z): 1.5 m/s2 Electric spindle: 6.6 kW HSK63 Spindle cooling: Air, liquid cooling Max. tool length: 130 mm Max. tool diameter: 140 mm (blade) Working pressure: 7bar Weight: 2500kg

Condition: used, machine/vehicle number: 007329, X axis working area: 3200 mm Y axis working area: 1850 mm Working Table: Pod and Rail Ncedpfx Aoxn Nfvshvsp Main Electrospindle power: 15 KW Number of controlled axes: 3 axes Number of controlled axes: 3 axes Total number of drilling spindles: 31 Total number of tool changer positions: 10

Condition: used, machine/vehicle number: 007980, X axis working area: 2050 mm Ncjdpewml Nkefx Ahvjp Main Electrospindle power: 11 KW Number of controlled axes: 5 axes

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: BCOR12150, BIESSE BREMA EKO 902 CNC and vertical dowel insertion machine for reduced cycle times Ncjdpew Nytnefx Ahvjp Equipment Features - Clamping grippers measure the thickness to adjust drilling depth - Laser-based measuring system for detecting the front and rear panel edges - Length tolerance compensation correcting the workpiece length in X - 5-position tool changer - Drilling head with individually retractable spindles and grooving saw - Diameter: 120 mm - Gluing and dowel insertion units mounted on Y and Z axes Options - 4.5 kW electrospindle; 18,000 rpm - Special drilling unit for hinges Technical Data - Panel length: 160 - 3200 mm - Panel width: 35 - 900 mm - Panel thickness: 8 - 80 mm - X/Y/Z axis speed: 100 / 60 / 30 m/min - X axis travel: 3200 mm - Y axis travel: 900 mm - Main spindle power: 4.5 kW - Number of controlled axes: 3 axes - Number of drilling spindles: 20 - Number of tool positions: 5

Condition: good (used), Year of construction: 2014, machine/vehicle number: 9911832, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 10,600 mm, travel distance Y-axis: 1,570 mm, travel distance Z-axis: 740 mm, total height: 2,760 mm, total length: 11,900 mm, total width: 4,500 mm, overall weight: 10,500 kg, spindle motor power: 10 W, rapid traverse Z-axis: 40 m/min, rapid traverse X-axis: 70 m/min, rapid traverse Y-axis: 60 m/min, spindle nose: HSK F63, tool diameter: 20 mm, tool length: 150 mm, tool weight: 3,000 g, Equipment: chip conveyor, documentation/manual, MECAL MC302 GEOS-5 5-AXIS MACHINING CENTRE, manufactured in 2014 in Italy, is designed for milling, drilling, tapping, and cutting of profiles made from aluminium alloys and plastics. The machine, equipped with top-quality components and innovative solutions, can process both on a single workspace and within two separate working zones, which significantly increases speed and production efficiency. Simultaneous machining in two working areas is possible thanks to the longitudinal worktable with a sliding machining station and chip conveyor. The MECAL machining centre for aluminium profiles achieves high structural rigidity due to its base made from high-grade steel tubes. During operation, the profile is held in place by special clamps with an independent power supply system, allowing for positioning and automatic repositioning of each individual clamp in a very short time. All 5 axes (X, Y, Z, A, C), driven by motors with digital systems, move along automatically lubricated precision guides. The MECAL GEOS-5 machining centre is offered with 3D software, providing a high level of programming flexibility, user-friendly operation, and an intuitive graphical interface. Technical specifications of the MECAL MC302 GEOS-5 profile machining centre: - Number of axes: 5 (X, Y, Z, A, C) - Y/Z axis travel: 1570/740 mm - Spindle tilt (A axis): ±120° - Spindle rotation (C axis): ±210° Ncsdpfsu Dl R Ujx Ahvep - Rapid traverse (X/Y/Z axis): 70/60/40 m/min - 3D graphical software - Tool magazine capacity: 18 - Maximum electrospindle speed: 24,000 rpm - Electrospindle power: 12 kW - Maximum blade diameter: 500 mm - Maximum diameter of side and end mill: 200 mm - Centralised lubrication

Year of construction: 2025, operating hours: 5 h, condition: refurbished (used), functionality: fully functional, machine/vehicle number: I 91-61, USED AND REFURBISHED MACHINE (AS NEW): • Usable working length: 2100 mm • 40 mm front stop for overlapping processing • Maximum block thickness: 140 mm • Working capacity at 90°: 2100 x 140 mm • Electrospindle power: 1.2 kW • PLC electronic sequential control • 3.5” touchscreen controls • Rapid belt drive with Brushless motor Ncjdpsx Da Dhefx Ahvep • Epicyclic reducer Complete with: • 8 pressure shoes • 2 front supports • 1 side square • 1 service wrench Supplied with a set of new polishing tools (with three synthetic diamond tips)

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Used Biesse Rover 35L CNC machining centre for woodworking, year 2001, in very good condition as shown in the photos. Machining range X 4500 mm, Y 1650 mm, Z 180 mm. Equipped with 10 HP air-cooled electrospindle, 21-position chain tool magazine, drilling head, pod & rail vacuum table and Becker VTLF 2.250 vacuum pump (2011). Machine details Brand / model: Biesse Rover 35L Year of construction: 2001 Type: CNC machining centre for routing, drilling and milling of panels and solid wood Condition: very good, complete, as in the photos Working range: X = 4,500 mm Y = 1,650 mm Z = 180 mm Composition / equipment 10 HP electrospindle, air cooling, ISO30 Chain tool magazine with 21 positions Pod & rail vacuum table with several vacuum pods ATS predisposition for vertical or horizontal pneumatic clamping (doors, frames, edges etc.) Drilling head (multi-spindle boring unit) Dust extraction hoods on the machining head Vacuum system Vacuum pump: Becker VTLF 2.250 Year: 2011 Capacity: approx. 250 m³/h Power: 5.5 / 6.4 kW Max. vacuum: 200 mbar Technical data Approx. dimensions on site (L × W × H): 7,580 × 4,570 × 2,800 mm Approx. weight: 3,000 kg Other information Nedpfx Ajx A Ap Rshvscp Used machine in very good condition, ready for dismantling and loading More photos and video available on request Location: Lithuania, at our factory (ex-works) Availability: by agreement Price: on request

Year of construction: 2025, condition: new, XX100292 New CNC Machining centre with 4 controlled axes FOM INDUSTRIE FMC 470 Machine in stock and ready for shipping Standard configuration: - Liquid-cooled electrospindle 7 kW, 20,000 rpm (HSK-F63) Njdoiv Imnjpfx Ahvecp - 9 location tool magazine on head (HSK-F63) - No. 2 pairs of pneumatic vices with positioning through the travelling column - No. 2 pairs of low profile jaws for clamping wide profiles - Left pneumatic reference stop - Minimum quantity lubrication (MQL) with pure oil - Central automatic greasing system and device for manual greasing - Chip and waste collection tank in base - Perimeter guard system with automatically opening, front retractable doors - X FLOW (automatic orientation of lubricant nozzles) - Control: POWER-D - Movable control console - 24” display - FST CAM 4 program Optional equipment installed on the machine: - PR202941 Fixed tool magazine for 8 positions in the center on the machine base - PR202962 Device for checking the integrity and measuring tool length - ZR204058 Pendulum mode with multiple workpieces (2 work areas, 4 workpieces) and processing of non-standard lengths with X-PAL: • Two pairs of additional vices with independent positioning • Transformation of std vices into vices with independent positioning • LED bar • Profile positioning software • Software for viewing the progress of the processing cycle • Device for measuring profile length • Second X-FLOW • Right pneumatic reference stop • Pendulum control software • Safety devices for pendulum processing • Tunnel for oversized profile machining • Software to manage oversized machining operations • ''Clock'' time calculation module program - PR202971 Data import software in accordance to FOM protocol and wireless optical bar code and QR code reader - ZP715010 Module for rigid tapping and chase tapping - PR202957 Hinged belt conveyor with ramp - PR203389 Rear chip collection tank - PR202975 Tool set A3/HSK F63 - PR202967 Angle head with vertical disc Ø 230 mm - PR202968 Cone with horizontal disc Ø 250 mm - PR204497 Holder HSKF63 with cutter Ø 200 x 6 mm - PR203072 Software adjustment of the vice pressure 3,5 - 7 bar - ZP714611 License for the office version of FST CAM 4

Condition: used, Year of construction: 2009, operating hours: 3,483 h, functionality: fully functional, total length: 5,550 mm, total width: 2,250 mm, bar diameter (max.): 95 mm, overall weight: 8,400 kg, Max. workable diameter from bar mm 95 Max. workable diameter from recovery mm 500 Max. workable length mm 1250 Max. rotating diameter mm 700 MAIN ELECTROSPINDLE: Variable rotation range rpm 40-2800 ASA spindle nose 8" Spindle hole mm 111 Internal diameter of bearings mm 150 Self-centering diameter mm 315 Motor power kW 30 TAILSTOCK TO FOLLOW: Positioning stroke mm 1,100 Quilt stroke mm 150 Quilt diameter mm 115 MOTORIZED ELECTROSPINDLE HEAD: Type of attachment HSK-63 Ncodovv Ud Rspfx Ahvsp Max. revolutions RPM 6,000 Electrospindle motor power Kw 9 B AXIS UNIT: Total rotation range 205° Rotation range beyond the tailstock axis 15° Rotation range beyond the spindle axis 10° Angular position with mechanical block Every 5° CROSS SLIDE Max. Z stroke mm 1300 Max. X stroke mm 520 Max. stroke Y mm 210 (+120 – 90) TOOL MAGAZINE Magazine capacity 40 pos Max. diameter of tools with adjacent tools mm 80 Max. diameter of tools without adjacent tools mm 140

Condition: used, TECHNICAL DETAILS - Number of axes : 10 - Number of spindles : 2 MAIN SPINDLE - Spindle power : 24 [kW] - Spindle speeds : 5000 [rpm] - Max. bar diameter : 65 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle power : 24 [kW] - Spindle speeds : 5000 [rpm] - Max. bar diameter : 65 [mm] - C axis indexing precision : 0.001 [°] - Travel : 390 / 600 [mm] TURNING-MILLING SPINDLE - X stroke : 350 [mm] - Y stroke : ± 80 [mm] - B Axis stroke : 270 [°] - B axis indexing precision : 0.001 [°] - Tool type : HSK-T40 - Spindle speeds : 18000 [rpm] - Spindle power : 11 [kW] - Fixed tools on milling electrospindle : 6 x VDI25 LOWER TURNING-MILLING SPINDLE - Y stroke : ± 80 [mm] - B Axis stroke : 270 [°] - B axis indexing precision : 0.001 [°] - Tool type : HSK-T40 - Spindle speeds : 18000 [rpm] - Spindle power : 11 [kW] - Fixed tools on milling electrospindle : 6 x VDI25 Ncjdpfsv Ig Avsx Ahvep TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 80 - Tool exchange time : 4.5 [sec] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 68 [kW] WEIGHT & DIMENSIONS - Machine height : 2500 [mm] - Machine weight : 11000 [kg] MACHINE HOURS - Spindle hours : 19781 [h] - Number of turning-milling spindle hours : 9713 [h] EQUIPMENT - CNC : Siemens Sinumerik 840D SL - Coolant tank * with high-pressure pump * with paper filtering unit * Coolant through spindle - Chips conveyor - Spindle cooling unit - Parts catcher

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: 35079, functionality: fully functional, travel distance X-axis: 3,060 mm, travel distance Y-axis: 1,140 mm, travel distance Z-axis: 160 mm, empty load weight: 600 kg, TECHNICAL DETAILS Travel range X-axis: 3,060 mm Travel range Y-axis: 1,140 mm Travel range Z-axis: 160 mm Number of working fields: 2 Drilling head spindles vertical X-axis: 7 Drilling head spindles vertical Y-axis: 6 Drilling head spindles horizontal X-axis: 4 Drilling head spindles horizontal Y-axis: 2 Ncjdpfx Ahjxx Rr Esvjp Vacuum pump capacity: 250 m³/h MACHINE DETAILS Weight: 600 kg Number of electrospindles: 1 Electrospindle power: 12 kW Tool changer positions: 10 Taper type: ISO 30 Electrical data Supply voltage: 380 V AC Rated current: 44 A Number of phases: 3 Power: 26.1 kW EQUIPMENT Bar worktable 6 adjustable bars for suction cup support 2 adjustable vacuum suction cups per bar with sealing Independent saw blade group for grooves in X-axis Front photocell guard and safety system Automatic lubrication system Conditioning system for cooling and cleaning the machine control

Condition: new, Year of construction: 2025, Semiautomatic milling machine with four electrospindles for water slot MLA WS42 EVO, new Nsdswqlmdopfx Ahvocp

Condition: ready for operation (used), Year of construction: 2019, machine/vehicle number: AA100001570, functionality: fully functional, travel distance Z-axis: 180 mm, table length: 5,510 mm, table width: 1,620 mm, rapid traverse X-axis: 56 m/min, rapid traverse Y-axis: 56 m/min, TECHNICAL DETAILS Processing table dimensions (L x W): 5,510 x 1,620 mm Z-axis travel distance: 180 mm Maximum vectorial rapid traverse speed X/Y-axis: 56 m/min Spindle unit speed: 4,000 rpm Tool changer slots: 44 Connection diameter: 250 mm MACHINE DETAILS Dimensions & Weight Dimensions: 9,700 x 5,020 x 2,650 mm (LxWxH) Net weight: 5,000 kg Spindle unit motor power: 5.5 kW Air consumption: 4,430 m³/h Air velocity: 25 m/s Voltage: 400 V / 50 Hz EQUIPMENT PRO-Speed safety system TEPCAD control panel with touchscreen color display Linear tool changer TBR14 Linear tool changer FAST14 Air blower on the electrospindle XY-axis safety guard Vacuum pump 150/300 m³/h 5-axis unit ‘JQX’ version 13.5 kW Fixed pedestal: 145 x 145 H=75 mm Rotatable gondola: 145 x 55 H=75 mm Clamp for 8 rails TV FLEX / TV FLEXDRIVE / TV FLEXMATIC MULTIGRIP 90 round clamp (H83) for TV FLEX / TV FLEXMATIC Maestro connect 1 year (including Gateway Kit plug & play) Njdpfx Asxmgr Rjhvocp SCM DIGITAL SOLUTIONS: MAESTRO CONNECT MAESTRO ACTIVE software for human-machine interface (HMI) Maestro software for CNC programming Hardware key for Maestro CNC Advanced Maestro 3D module Additional key for Maestro CNC (USB connection) Windows 10 embedded 64-bit operating system Console with integrated PC eye-M PRO

Condition: new, Year of construction: 2025, The SZ 200 is a 4-axis milling machine designed for a wide range of production processes and precisely tailored to the needs of various industries. It is a unique, reliable, and cost-effective product that optimizes working conditions for operators. The SZ 200 comes equipped with four automatic clamping devices and a high-performance electrospindle. With a power output of 5.6 kW and a speed of 20,000 rpm, it easily handles all production requirements. The machine features comprehensive equipment: enclosure, tool changer, standard clamping system, and tools. The ergonomic control panel, like the entire machine, is extremely compact. Even complex profiles and machining operations can be carried out within a footprint of just 10 m². The tool changer offers 12 tool positions. X-axis travel: 3,010 mm Y-axis travel: 245 mm – 320 mm Z-axis travel: 250 mm A-axis rotation: 180° X-axis max. speed: 55 m/min Y-axis max. speed: 40 m/min Z-axis max. speed: 30 m/min A-axis max. speed: 3,000°/min Nodpfext D R Dsx Ahvocp

Condition: used, machine/vehicle number: 005583, X axis working area: 3680 mm Nedpfjtwgirsx Ahvscp Y axis working area: 2040 mm Working Table: Flat table Main Electrospindle power: 13 KW Number of controlled axes: 3 axes Total number of drilling spindles: 11 Total number of tool changer positions: 12

Condition: used, machine/vehicle number: 006487, X axis working area: 3060 mm Y axis working area: 1240 mm Njdpen Rzclofx Ahvjcp Working Table: Flat table Main Electrospindle power: 8.5 KW Number of controlled axes: 5 axes Total number of drilling spindles: 18 Total number of tool changer positions: 16