Used Electrical Nic for sale (60,700)

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 050155-1, Glass cutting table by Bystronic, model SMFR. Technical specifications can be found in the photos below. Full technical documentation available. Dlsdpfx Abjx Ekvmj Tea

Condition: excellent (used), functionality: fully functional, Segment I – Unwinder with stabilizing table The first segment is responsible for stable guidance of the material web. It is equipped with pins enabling both lamination and delamination of the face with liner or other raw material. It has a laminator with the possibility of precise pressure adjustment. In addition: • The hanging mechanism in each segment allows for continuous operation, eliminating the need to stop the machine while the flat die is working. Dsdpfx Aowck U Rsb Tola • Leading (pulling) servomotors ensure precise control of the material, also located in the station. Segment II – Central (Die) The heart of the machine is the flat die, allowing for cutting and embossing. It has been equipped with: • Hot stamping system – thanks to the heated plate with a mounted matrix, it allows for the application of effective decorations. • Upper foil unwinders enabling additional material processing. • Manual pressure adjustment – four independent clocks provide full control over the process, which is particularly important for irregular matrices and unconventional work. • Lower trolley as an alternative to the hanging system – used depending on the specifics of the work. Segment III – Puncher The third segment is responsible for separating cut labels and transporting them to the receiving tray. • Puncher – precise separation of single labels. • Two laminators – one on each side of the puncher, with adjustable pressure. • Unwinders and winders ensuring smooth guidance of additional raw material. Segment IV – Rewinder The last segment is responsible for the final winding of the finished material. Equipped with: • Two mandrels – enabling simultaneous or alternate winding of the finished product. • Web tensioning system (nip holding and web tensioning) – ensuring stable guidance of the material. • Slitting disc knife station. • Whisk (waste) extraction system. • Web sensors placed under each overhang, ensuring optimal process control. Additional functionalities • Remote control – the machine can be operated via the tablet included in the set. • Mark sensor system (register) – precisely matches previously printed raw material, ensuring high accuracy and repeatability of production.

Condition: good (used), functionality: fully functional, Year of construction: 2015, laser power: 4,400 W, Equipment: documentation/manual, CNC Laser Cutting System Bystronic ByAutonom 3015 4400 Watt with BytransCross/BytransLine Automation Max. X working area: 3000 mm Max. Y working area: 1500 mm Max. Z working area: 80 mm Control: ByVision Laser power: 4,400 watts Maximum sheet thickness, steel: 25 mm Maximum sheet thickness, stainless steel: 20 mm Maximum sheet thickness, aluminium: 12 mm 1 Base Machine 1.1 ByAutonom 3015; ByLaser 4400 1.2 Automatic shuttle table system with 2 shuttle tables 1.3 Integrated control cabinet 1.4 ByVision 1.5 Operator comfort options 1.6 Touchscreen with ByVision user interface 1.7 Condition Messenger 1.8 Maintenance Messenger 1.9 Restart Manager 1.10 System Manager 1.11 ByHand (manual guidance function) 1.12 Cutting Parameter Assistant 1.13 Uninterruptible Power Supply (UPS) 1.14 Laser plasma cutting of thick materials 1.15 Cutting bridge 1.16 Cutting head with 5" and 7.5" lens cassettes 1.17 Collision detection 1.18 Automatic nozzle centring 1.19 Regulated pulsed piercing 1.20 Bypos CO₂ 1.21 Cut Control 1.22 Lens protection 1.23 Nozzle cleaning 1.24 Scanning function 1.25 ByLaser 4400 laser 1.26 Magnetically mounted compressor 1.27 Power Saving Mode 1.28 Output coupler protection 1.29 Interface for automation/handling 1.30 ByLaser 4400 chiller 1.31 Laser gas premix 1.32 Operator safety in cutting area 1.33 Operator safety in loading/unloading area 1.34 Voltage 400V / 50Hz 1.35 Electrical connection (machine, incl. laser source) 1.36 Electrical connection for laser source dehumidifier 1.37 Compressed air supply (machine incl. laser source and chiller) 1.38 Material specification 1.39 Part tolerances and cut surface quality 1.40 Assist gas supply and gas quality 1.41 Ambient conditions 1.42 Structural requirements 1.43 System documentation 2 Accessories for the machine 2.1 Laser source position 270° 2.2 Enclosed housing/roof 2.3 Parts and cross conveyor in cutting area 2.4 Dust extraction unit with drum adapter: 3000 (200 l/55 gal drum) 3 Value Packages 3.1 Kit with lens cassette and nozzle changer 3.1.1 Automatic nozzle changer (kit) 3.1.2 Automatic lens cassette changer (kit) 4 BytransCross/BytransLine Dodpsx Aq S Hsfx Ab Tela 4.1 BytransCross 3015 includes: - 2 manually movable sheet metal tables - Sheet separation with double sheet detection 4.2 Surcharge for electrically driven sheet metal table

Condition: good (used), working width: 2,500 mm, type of input current: three-phase, input voltage: 380 V, Bending machine for the production of corrugated cardboard packaging. 4 creases 3pkt ( regulation of height of each crease separately), 1 pair of knives for cutting.The machine has 5 shafts Dedpfx Aot Syrbsb Tola

Condition: excellent (used), Year of construction: 2022, operating hours: 4,500 h, functionality: fully functional, machine/vehicle number: M004397 M003639, type of input current: three-phase, total width: 2,770 mm, total length: 25,000 mm, For sale: a complete cutting room line with Morgan Tecnica spreading machine, purchased in 09/2022. The machinery is fully operational and ready for immediate use. It has been serviced by the manufacturer, Morgan Tecnica. The total working time of the cutter amounts to approximately 4,500 hours. The Next 2 Δ ES is a multi-layer cutting machine by MorganTecnica, designed to provide maximum reliability in terms of durability and performance for fabric cutting in mass production environments. The machine integrates several mechanical enhancements to reinforce its cutting head. Next 2 Δ ES technology ensures the highest quality of cut combined with maximum productivity, low operating costs, and a fast return on investment. Specifications of the Next 2 Δ 80 ES Cutter: - Maximum cutting thickness: 8 cm (compressed) - Maximum cutting speed: 65 m/min - Maximum cutting acceleration: 6 m/s² - Maximum positioning speed: 120 m/min - Maximum positioning acceleration: 10 m/s² - Effective cutting window length: 170 cm - Effective cutting window width: 180 to 220 cm - Average energy consumption: Dsdex Ebkxepfx Ab Tola

Condition: excellent (used), The machine is in very good condition with a 3.5 million counter. Included options: LU 202xlm / FA 502 / FS 532 / RU 518 / HM 103 / IQ 501 Dlsdpfx Abjx Eaylj Tea

Condition: used, Year of construction: 1991, total length: 6,450 mm, total height: 2,200 mm, total width: 2,200 mm, Komplett mit Förderband und Magnet - Year: 1991 - Documentation available: No - CE certificate present: No - Main motor power [kW]: 45 - Rotation speed [rpm]: 982 - Hydraulic unit power [kW]: 7.5 - Oil tank capacity [L]: 110 - Rotor width [mm]: 1000 - Hydraulic slide present: Yes - Stroke hydraulic slide [mm]: 2300 - Opening width [mm]: 2500 - Opening length [mm]: 3200 - Sieve perforation [mm]: 200 - Number of rotating knives [pcs.]: 1 - Transport dimensions: 6450mm x 2200mm x 2200mm (l x w x h) - Transport packages [pcs.]: 3 Dledpfx Ajww T U Nob Toa Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Info: Conveyor with air-cushion support TB-V-LK 1,5 x 1,3, 1300 mm long + Gas-filling & press robot ZP 1,6 x 2,5 VR SP G 1 AS, spindle driving, 2700 mm long Dodpfx Abevy Eyqo Tjla

Condition: excellent (used), Year of construction: 2013, For sale: Complete overhead travelling crane with an electric chain hoist from the renowned brand Stahl, with a lifting capacity of 1000 kg. Year of manufacture: 2013. The set is fully operational and ready for further use. ✅ Technical specifications: * Year of manufacture: 2013 Dlodpfx Aswcrazjb Tea * Lifting capacity: 1000 kg (1 ton) * Hoist: STAHL ST2010 – robust and reliable unit * Drive type: electric, chain * Total crane length: 1046 cm (10.46 m) * Stable main girder + cable and power guides * Inspection possible on site – previously operated in a clean production hall The crane is in very good technical condition – well maintained and ready to use. Ideal for workshops, industrial plants, warehouses, metalworking shops, or tool rooms.

Condition: good (used), Year of construction: 2006, Triple insulating glass. Max. package thickness: 60 mm. Max. glass size: 4500 x 2700 mm Dlsdex Dtuyepfx Ab Tea Sealing material used: Polysulfide / silicone. Total length of the system: approx. 12 m. Height: 2860 mm. Condition: good, second-hand

Condition: new, Year of construction: 2025, saw blade diameter: 600 mm, grinding wheel diameter: 30 mm, compressed air connection: 5 bar, New saw blade grinding machine - chip divider groove grinding machine. Grinding range approx. 120-600 mm diameter Saw blade tooth pitch max. approx. 22 mm Control: Siemens PLC with automatic shut-off after grinding process Grinding spindle: High-frequency spindle, 24,000 rpm, power 800 watts! Cooling: Minimum quantity lubrication Saw blade clamping: pneumatic Gearbox: oil-bath lubrication Saw blade thickness adjustment: via backlash-free preloaded ball screw Grinding stroke: via heavy-duty linear roller guide Accessories: - 1 set of reducing rings 16x22,25,32,40,50 mm - Circuit diagrams Dodoqpdi Rjpfx Ab Tela - Grinding wheel 30x0.3x6 mm, CBN Operating voltage: 400V, 50 Hz Compressed air connection: required for saw blade clamping (very low air consumption)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 1765, power: 696 kW (946.30 HP), Biomass boiler Uniconfort Biokraft 60, year 2007 (output 696 kW at 2 bar), designed to burn wood and green material with moisture content over 50%. Equipped with a moving grate and automatic loading via redler conveyor, it guarantees efficiency and continuous operation. High-efficiency, three-pass heat exchanger. Dedpex Dnkpjfx Ab Tela Loading by pusher, not by auger. Automatic tube bundle cleaning with compressed air. Automatic ash removal by auger into a water bath. Includes all accessories for disassembly. Ideal for sawmills, workshops, and small businesses, it offers a sustainable, safe, and easy-to-manage energy solution.

Condition: used, Year of construction: 2000, total width: 2,000 mm, total length: 6,500 mm, total height: 2,000 mm, Empty weight: 2.500 kg Price: On request Steel/stainless steel/aluminum plasma capacity up to 12 mm. Hypertherm Powermax 1100, Harris Autogenous propane 3-200 mm. CR-electronic cutting/nesting software. - Year: 2000 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: OXY031200 - Control: CNC - Travel X: 4000mm - Travel Y: 2000mm - Resonator type: Hypertherm Powermax 1100 - Max. sheet thickness: 12mm - Transport dimensions: 6500mm x 2000mm x 2000mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Dedpexrzl Aefx Ab Tjla VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1999, functionality: fully functional, Info: IG production line for IGunits thick till 100 mm, Dlodpfx Absx Dxrwe Tsa left to right, - Min. glass size 190 x 350 mm - Max. glass size 2000 x 3200 mm - Max. glass weight 500 kg - Max. single glass sheets: 45 mm, - Max. IG-units thickness: till 100 mm; - Control: SIEME

Condition: excellent (used), CATALOG NUMBER 7614 Technical data: - Inlet width: 550 mm - Inlet height: 220 mm - Shaft width: 630 mm - Knife length: 630 mm - Number of knives: 2 pcs - Sieve dimensions: 60x60 mm - 2 lower toothed feed shafts - Lower shaft motor approx. 1.5 kW - Upper toothed feed shaft - Upper shaft motor approx. 1.5 kW - Vibrating chute - Vibrating chute length: 4750 mm - Vibrating chute width: 450 mm - Main motor: 45 kW - Vibrating chute motor: 1.5 kW - Auto-reverse - Reverse mode Dlsdjwa Am Hopfx Ab Tea - Overall machine dimensions L/W/H: 3200x1700x1400 mm - Overall machine dimensions L/W/H: 4750x800x1100 mm - Weight approx.: 4500 kg ADVANTAGES – Auto-reverse (adjustable) – Reverse mode – Used chipper, in very good condition Net price: 120,900 PLN Net price: 28,780 EUR (depending on the 4.2 EUR exchange rate) (Prices subject to change with significant exchange rate fluctuations)

Condition: good (used), Year of construction: 2005, Main components: Washing machine, scanner, inspection station, gas filling press, cork applicator, automatic sealing, water treatment. The system dates from 2005, except for the washing machine (1992). Dsdpfex Dtq Iox Ab Tsla The brushes are in perfect condition. Total length of the system: approx. 43.8 m. Condition: good, second-hand

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: CryoMax Eco 17Y110-01, New (demo machine) purchased and used once at a customer site for a short demonstration! Dlodpfxsx Dkags Ab Tsa

Condition: excellent (used), The machine is in perfect condition with a 1.1 million counter. Included options: PF 707m / RU 518 / HM 103 / FS 532 / PK 522 / SD 510. Dlodpfxex Di R Dj Ab Toa

Condition: used, Year of construction: 1992, Price: On request Cutting bench, cutting shear Type: Hydraulic Manufacturer: Beyeler Type: C 4100x10 Year: 1992 ELGO adjustable backgauge Djdownhfqopfx Ab Tola Cutting width: 4100mm Cutting thickness: 10mm Electric Backgauge: 1100mm Throat: 80mm Total dimensions: 4900x2450x2050mm Machine-weight: 14000kg - Year: 1992 - Documentation available: No - CE certificate present: No - Serial number: 1992/1805 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Year of construction: 2025, Lifting device for meat trolleys 200 liters. Used for loading vacuum mixers, filling machines, and others. Made entirely of stainless steel - 1.4301. Dlsdpowqcgnefx Ab Tja The execution can be left or right, and it can also be mobile. Installed power 0.75 kW. Maximum load capacity 300 kg. Dump height 150 cm. Weight 340 kg.

Condition: new, Year of construction: 2025, functionality: fully functional, Fenice Plain Spray Booth Wall Brand new Available options: Plain-2000mm net price 17,800 PLN Filtration capacity 8,000 m3/h Motor power 1.5 kW Plain-3000mm net price 21,500 PLN Filtration capacity 11,000 m3/h Motor power 2.2 kW Plain-4000mm net price 25,800 PLN Djdjxz Achspfx Ab Tola Filtration capacity 15,000 m3/h Motor power 4.0 kW Plain-5000mm net price 34,000 PLN Filtration capacity 16,500 m3/h Motor power 5.5 kW Plain-6000mm net price 38,000 PLN Filtration capacity 22,000 m3/h Motor power 2.2 kW + 2.2 kW Custom sizes available on request

Condition: good (used), Year of construction: 2014, Lifting capacity: 550 kg. Weight: 100 kg. Condition: good, second-hand Djdex Dtfropfx Ab Tela

Condition: excellent (used), functionality: fully functional, drying rack for drying parts after painting double-sided length of shelves 780mm maximum distance 2520mm minimum distance 350mm Dlodpovcb Ivofx Ab Tsa 22 shelves bars covered with rubber mobile construction clearance between bars 115mm

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 1,300 mm, total width: 1,830 mm, total height: 2,735 mm, warranty duration: 12 months, overall weight: 950 kg, input voltage: 380 V, power: 35.5 kW (48.27 HP), pressure: 4 bar, temperature: 110 °C, Universal machine for heat treatment of all kind of meat products and fish. Heating can be realized by electricity, vapor or gas. Air circulation system provides processes steadiness and operates with two speeds 1450/2850 min-. Dedpfx Abewp I Axe Tela Smoking generator can be installed to the left or to the right. Valve pneumatic control. Chamber is controlled by ADITEC. Control unit measures and control chamber and sausage temperature, humidity, delta t, processing time. 100 programs can be saved by 10 steps. Following sensors are used: Pt 100. Software for visual control is offered as an option. Chamber is equipped with a system for automatic washing. Each module is equipped with its own heating and circulation which ensure processes steadiness and processing time reduction.

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 220 V, warranty duration: 12 months, total height: 730 mm, total length: 1,115 mm, total width: 490 mm, overall weight: 50 kg, Machine for mini donuts, made of stainless steel materials according to AISI 304, according to the regulatory documents for the food industry. Automatic dosing, turning and removal of the donuts from the fryer. Dlsdpfxswp Il Ho Ab Tsa Electronic counter Easy to service.