Used Eisen Und Hammerwerk Gmbh for sale (81,968)

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 382, Log sawing line with infeed and outfeed conveyors, 2 x 2 electrically movable sawblades, sawblade diam 970 mm, Iaedpfexwyzgsx Ah Njl main el.motors 2 x 45kW. Log length 0,8 - 8 m, max log diam 40 cm, original electric cabinet, line is still under power and can be demo started up, line has been in operation totally 3-4 years

Condition: used, empty load weight: 2,300 kg, maximum load weight: 20,000 kg, overall weight: 22,300 kg, next inspection (TÜV): 11/2025, loading space length: 6,000 mm, loading space width: 2,000 mm, tire size: 450x300, color: orange, Year of construction: 2025, operation weight: 20,000 kg, Heavy-duty transport trailer with dimensions 6000 x 2000 x 610 mm. Payload capacity of 20 tonnes at 6 km/h. Steering: all-wheel axle stub steered with adjustable tie rods. Tyres: 450 x 300 bandages on steel rims with double-sided tapered bearings, drawbar with forged 40 mm towing eye. Drawbar equipped with drop safety device, 40 mm spruce transport floor, recessed and bolted. Lashing eyes for load securing welded to each longitudinal side of the frame. Double-acting wheel chock mounted on the frame. Iedpsn D D S Sefx Ah Njal

Condition: as good as new (ex-display), Year of construction: 2026, S&F drum chipper type ATH 220x530/3 Demonstration machine / trade fair machine / new machine Solid design with long service life Feed height: 200 mm Feed width: 500 mm Number of chipper knives: 2 pieces Number of counter knives: 1 piece Rotor diameter: 520 mm (solid steel rotor) Number of feed rollers: 3 pieces Throughput rate: up to approx. 20 rm/h * Chipping length: approx. 30 mm Chipper drive power: 45 kW or on request Feed roller drive power: 2 x 2.2 kW Operating/control voltage:400/220 V, 50 Hz Weight: 2,600 kg *depending on chipper length, kW main motor, number of knives, feed S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation Advantages: - Maximum throughput Iodpsw I R Rnsfx Ah Noal - Low fines content - Low maintenance - Flexible use - Customised production

Condition: new, Year of construction: 2024, Machine designation: Portal nailing machine for pallet production Manufacturer: Stoiber GmbH Model: StoNail 3000 Year of construction: 2024 Condition: New Price & Location: Price on request 4122 Arnreit Description: - Semi-automatic portal nailing machine for the production of various types of pallets & crate parts. - A flexibly adjustable clamping system or a wooden wall for templates are available for inserting loose blocks and boards to minimize changeover times. - Divided into two work areas, the machine operator always works alternately on the left or right side of the machine. - The nailing bridge is equipped with up to 8 nailing devices with jumbo coil nails (approx. 8000 nails). By controlling the nailing devices together, this machine offers very short production times and therefore high throughputs. - Machine operation and programming of new pallet types are carried out via a touch display. Existing programs can be recalled from the memory at any time. No manual movement required to teach in the nailing points! - NEW - Robot for pallet stacking Technical data: Iaodpsralk Rofx Ah Njl - Pallet size max. standard: 2500 x 1700 mm per side - Pallet size max. optional: 3500 x 1700 mm per side - Nail length max.: 90 mm - Jumbo coil: approx. 1000 nails/coil - Production capacity: 400 - 600 pallets/8 h - Machine operator: 1 - 2 persons - Low operating and maintenance costs

Condition: used, Used jacketed stainless steel mixing tank by Diessel (D). Total volume 670 l. Working volume approx 500 l. Mixing chamber has internal dimenssions: Ø 985 mm x length of straight side of the wall 1060 mm. Working pressure up to 3 bar at 144 C. Tank has stainless steel heating jacket with volume 52 l. Working pressure up to 3 bar, at 144 C. Top opened by accutator, has mounted paddle type agitator, driven via gearbox and el. motor 1.5 kW. Working rotation of agitator up to 365 rpm. Central bottom discharge outlet with manually operated valve. Tank is mounted on 4 stainless steel legs and equipped with local control panel with frequency converter. Ijdpfx Aox Niy Ejh Noal Specifications: Capacity: 132.1 gal Diameter: 3.23' Height: 3.48' Vertical/Horizontal: Vertical Dimensions: Ø 985 x 1060 mm

Condition: used, Format: 0x0 Iajdex Rh D Sjpfx Ah Nol Equipment: Toggle press for beech corners, 40 mm stroke, 73 mm throat depth

Condition: like new (used), functionality: fully functional, machine/vehicle number: 19-1134P, Year of construction: 2020, operating hours: 4 h, load capacity: 1,500 kg, lifting height: 3,300 mm, mast type: duplex, gearing type: hydrostat, battery voltage: 24 V, Equipment: CE marking, clamp, gripper hydraulics, Manufacturer: APE Engineering GmbH Type: Universal Pallet Truck UHW 1500-27/E-Tele-SO Year: 2020 Voltage: 24V Lifting height: approx. 3300 mm (center of rotary device) Load capacity: 1500 kg Operating hours: 4 h (readout) This unit is designed for use on level ground for lifting, transporting, gripping, and rotating crucibles. Crucibles can be picked up and swiveled. Equipment: - 360° hydraulic rotary device - Initial lift approx. 100 mm - Hydraulic clamping device - Integrated 230V charger - 24V tray battery from Hawker Scope of delivery: - Universal pallet truck - Complete documentation including circuit diagrams and EC Declaration of Conformity Dimensions: Isdow Izrcspfx Ah Noal Width: approx. 1650 mm Height: approx. 2300 mm Length: approx. 1950 mm without attachment and approx. 2400 mm with attachment The machine can be demonstrated on site. All information subject to change. Intermediate sale reserved. The item is sold without any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller, nor to any injury to life, limb, or health.

Condition: excellent (used), I am offering a complete industrial process pump with ATEX (EX) explosion-proof design, mounted on a robust steel skid frame. The unit is ready for immediate use in industrial installations, including hazardous (explosive) zones. Iaodpfx Ahsx Ndbws Njl Pump manufacturer: Victor Pumpen GmbH (Germany) Model: R40 KM6TM +2A / 88RF38+693De/6-K Electric motor: CEMP (Italy) • Power: 1.5 kW • Three-phase 230/400 V • 1,400 rpm • Protection class IP55 • Explosion-proof execution Ex d IIB T4 Gb • ATEX / IEC 60034 certification Gearbox: Siemens – EX version • ATEX Certificate II 2D c T120°C • IP55 • Gear oil: CLP VG 220 • Output speed up to approx. 72 rpm Features and equipment: • Complete unit on mounting skid • Coupling guard • Connection flanges • Pressure gauge • Heavy-duty industrial construction • Excellent visual condition Applications: The pump is designed for transferring oils, fuels, resins, adhesives, solvents, and other process media. It is ideal for use in the chemical and petrochemical industries, paint shops, EX installations, and applications requiring continuous operation and stable pressure.

Condition: new, Year of construction: 2026, Drum chipper series ATH-220/530/3 | ATH-220/730/3 | ATH-220/1060/3 S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation Series ATH-220/530/3 | ATH-220/730/3 | ATH-220/1060/3 - Feed height: 200 mm - Feed width: 500 | 700 | 1000 mm Iasdowbv Erepfx Ah Nel - Number of chipper knives: 2 - 4 pieces - Number of counter knives: 2 pieces - Rotor diameter:520 mm - Number of feed rollers: 3 pieces - Throughput: up to approx. 40 rm/h * - Chipping length: 5 - 50 mm - Chipper drive power: 22 - 110 kW - Drive power feed rollers: 2 x 2.2 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 2,800 - 4,000 kg *depending on chipper length, kW main motor, number of knives, feed Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Condition: new, Year of construction: 2024, Machine designation: Gantry Nailing Machine for the Pallet & Packaging Industry Manufacturer: Stoiber GmbH Model: StoNail 7000 Year of manufacture: 2024 Condition: New Iasdorallnjpfx Ah Nsl Price & Location: Price on request 4122 Arnreit Description: • Designed for the production of various types of pallets and box components • Angled machine frame with wooden template wall • Divided into two work zones: the operator works alternately on the left or right side of the machine • The nailing bridge is equipped with up to 6 individually controlled nailing units for jumbo coil nails (approx. 6,000 nails) • Machine operation and programming of new pallet types are handled via a touch display • Existing programs can be recalled from memory at any time • Entered parameters are visualized on the touch display – no manual teaching of nailing points required! • NEW – Robot pallet stacking system! Technical Data: • Max. standard pallet size: 3,000 x 1,700 mm per side • Max. optional pallet size: 4,000 x 2,000 mm per side • Max. nail length: 130 mm • Jumbo coil: approx. 1,000 nails/coil • Production capacity: 400 – 600 pallets per 8 hours • Operators: 1 – 2 persons • Low operating and maintenance costs

Condition: new, Year of construction: 2026, Dump belt blast wheel blast machine 7,5 kW direct driven indexing turbine with 8 throwing blades. Belt width 700mm and Ø600mm Iodpjg S Rt Esfx Ah Noal

Condition: used, Year of construction: 2003, machine/vehicle number: 1964, Coil weight: 500 kg Material width: 41 mm Coil exterior diameter: 1.000 mm Expansion range: 250 - 500 mm Speed: 20 m / min Required power: 0,5 kW Dimensions L x W x H: 1.000 x 850 x 1.700 mm Iasdpfx Ahjuqc Ive Njl Weight of machine approx.: 200 kg

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, overall weight: 100 kg, space requirement height: 1,025 mm, space requirement length: 955 mm, space requirement width: 530 mm, extraction nozzle diameter: 100 mm, grinding width: 150 mm, grinding belt speed: 30,000 mm/s, grinding belt length: 2,000 mm, power: 3.3 kW (4.49 HP), grinding belt width: 150 mm, Good day, We are pleased to offer you, subject to prior sale, a used belt grinding machine, model MBSM 150-203-2, manufactured by Stürmer Maschinen GmbH. Manufacturer: Stürmer Maschinen GmbH, Germany Model: MBSM 150-203-2 Year of manufacture: 05/2024 Abrasive belt length: 2000 mm Abrasive belt width: 150 mm Belt speed: 30 / 15 m/s Graphite platen length: 495 mm Graphite platen width: 150 mm Motor power: 2.5 / 3.3 kW Extraction nozzle diameter: 2 x 100 mm Power supply: 400 V / 50 Hz Sound pressure level: 87 dB (A) Required floor space: 955 x 530 x 1025 mm (L x W x H) Weight: approx. 100 kg Key features as per the manufacturer: Isdox N Ugqjpfx Ah Njal - The machine can be operated at two belt speeds: 30 m/s and 15 m/s. - A continuous surface grinding area, enabled by removable attachments, allows for the processing of long workpieces. - An integrated quick-release system ensures rapid belt changes. - Simple belt tracking adjustment via a setscrew on the front contact roller. - Automatic belt tensioning through a spring-loaded tensioning system. - Infinitely adjustable tilt of the grinding unit. - Separate extraction nozzles on both the spark box and the rear belt roller. Note: The above technical specifications are taken from the operating manual, manufacturer’s brochures, or other sources. We assume no liability for the accuracy or completeness of the information provided. Scope of delivery: 1 used belt grinding machine, type MBSM 150-203-2 by Stürmer Maschinen GmbH Application and condition: The machine was only occasionally used in a maintenance workshop for grinding surfaces, edges, and rounding off during repair work or the fabrication of spare parts for our own machinery. It is in almost as-new condition. The machine is fully functional, in excellent condition, and can be inspected under power at our workshop. We would be pleased if this machine is of interest to you. Your service team, Mertens & Frowein GmbH

Condition: used, Year of construction: 2014, functionality: fully functional, Machine name: Hydraulic Tire Vulcanizing Press with Two Stations 2. General Information Manufacturer: HF TireTech Group (Harburg-Freudenberger Maschinenbau GmbH) Model / Type: KHP 46-150 Year of manufacture: 2014 Order number: 7282500526 Station Labels Left station (factory number): 4L Iaodpfsx I D A Sjx Ah Nel Right station (factory number): 4R Control Interface System: Rockwell Automation / Allen-Bradley PanelView Plus 700 Controls: Integrated physical push-button panel 3. Technical Data / Specifications - Configuration: Vertical hydraulic curing press with two chambers Pressure Specifications Maximum pressure: Not clearly legible on the attached nameplate; corresponds to the design parameters of the KHP 46-150 series (typically approx. 250 bar, based on model specifications). Electrical cabinet - Label: Cabinet B01 Inventory tags: “024398” / “100” Hydraulic System - Unit Manufacturer: Parker Tank / Components: Branded hydraulic reservoir and system components Pump / Motor: Vertically mounted electric motor on a white/beige hydraulic tank Loading Mechanism - System: Automatic loading system for green tires - Mold handling: Segmented mold handlers Pneumatic Control System Control panel: Dedicated pneumatic control panel (Pneumatic PC) Equipment: Pressure regulators and solenoid valves

Condition: new, Year of construction: 2026, Drum chipper series ATH S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation ATH 220 series - Feed height: 200 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 4 pieces - Number of counter knives: 2 pieces - Rotor diameter:520 mm - Number of feed rollers: 3 pieces - Throughput: up to approx. 40 rm/h * - Chipping length: 5 - 50 mm - Chipper drive power: 22 - 110 kW - Drive power feed rollers: 2 x 2.2 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 2,800 - 4,000 kg ATH 330 series - Feed height: 300 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 6 pieces - Number of counter knives: 2 pieces - Rotor diameter: 700 mm - Number of feed rollers: 3 pieces - Throughput capacity: up to approx. 70 rm/h * - Chipping length: 5 - 80 mm - Chipper drive power: 37 - 250 kW - Drive power feed rollers: 2 x 3.0 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 3,500 - 5,000 kg *depending on chipper length, kW main motor, number of knives, feed Advantages: - Maximum throughput - Low fines content - Low maintenance Iasdpeuz Hmxefx Ah Nol - Flexible use - Customised production

Condition: new, Year of construction: 2024, functionality: fully functional, Milling head debarker with root reducer: Manufacturer: Stoiber GmbH Model: StoMill 3000 Year of manufacture: 2024 Condition: New Price & Location: Price on request AT - 4122 Arnreit Iedperk Nk Eofx Ah Neal Description: For fully automatic debarking and root reduction of hardwood and softwood. Advantages of the system: - Cutterhead debarker and root reducer in one machine - Patented safety cutterhead - Fully automatic process - Operation via radio remote control - Low energy consumption Technical data: - Debarking shaft with 22kW or 30 kW drive power - Reducer shaft with 15kW - 45kW drive power - For all logs from a length of 2 meters - Log diameter: 20 - 120 cm Options: - Chip box - Scraper chain conveyor for chip removal - Log ejector / log collection tray

Condition: like new (used), Year of construction: 2021, Warranty 12 months - Max. temp.: 250°C - Interior (W x D x H): 1600 x 1200 x 1700 mm Iedewktiyjpfx Ah Njal - Capacity: 3,264 liters - With drive-in rails - Jumo Dicon touch - Equipped with exhaust fan - Net weight: 1850 kg - IP rating: 20 - Power: 29.5 kW - Documentation included We are happy to offer installation and commissioning on request. Inspection at our warehouse by appointment only. We offer new and used industrial ovens. Please contact us! Oven, ovens, drying oven, kiln, heat oven, heating cabinet, industrial oven, tempering oven, warming oven, temperature oven, drying cabinet, chamber oven, curing oven, recirculating drying cabinet, recirculating oven, solvent oven, paint dryer

Year of construction: 2014, condition: excellent (used), functionality: fully functional, For sale is an SMD pick-and-place machine from Fritsch GmbH, model placeALL 610, equipped with a single placement head featuring laser centering. The machine is fully operational and ready for use after programming. Technical Data: Type: placeALL 610 Year of manufacture: 2014 Placement rate: 600 components/hour Component sizes: 0402 chips up to 22x22 mm (alternatively up to 32x32 mm) Laser centering: non-contact, on-the-fly Slots: 108 Feed positions: 208 for 8 mm tapes Iaodpfswy U Nmsx Ah Njl Placement table: 520 x 370 mm Placement area: 620 x 450 mm Tool: 5 x standard Additionally: Camera system: Vision System II + lighting Dispensing system: CD-05 placement tool & air blow function Frame adjustment; access for robot arm from the left Universal CAD conversion Barcode reader for ID barcode Camera attachment for LM, SM, FP systems and much more. Feeders: - 2 pcs feeder racks with 16 slots each, for tape/tube feeders, front and rear side PA610 - 1 pc feeder rack with 22 slots, for tape/tube feeders, left and right side PA610/L - 20 pcs tape feeders 8 mm, max. tape thickness 1.1 mm, max. tape height 6.0 mm, max. tape width 8.3 mm, max. roll width 17.5 mm, 1 slot each, barcode configurable - 4 pcs tape feeders 12 mm, max. tape thickness 1.4 mm, max. tape height 6.0 mm, max. tape width 12.3 mm, max. roll width 17.5 mm, 1 slot each, barcode configurable - 2 pcs tape feeders 16 mm, max. tape thickness 1.4 mm, max. tape height 13.0 mm, max. tape width 16.3 mm, max. roll width 30.5 mm, 2 slots each, barcode configurable, incl. feeder extension 908.120.007 - 1 pc tape feeder 24 mm, max. tape thickness 1.4 mm, max. tape height 13.0 mm, max. tape width 24.3 mm, max. roll width 30.5 mm, 2 slots, barcode configurable, incl. feeder extension 908.120.007 - 1 pc vibration tube feeder, processes max. 10*SO sticks, 5 slots, barcode configurable - 1 pc feeder setup station with software for setting up and creating a complete component, PC connection via RS232 (PC not included) - 1 special PA wire feeder for feeding and cutting wire pins, including placement tool - 5 pcs tape feeder TF 943 cassettes for 8 mm rolls, width 11 mm Transport and loading can be organized Europe-wide upon request for an additional fee. Prices are exclusive of VAT. Viewing available by appointment. Contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase/sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY, ETC. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to get in touch, please visit our website.

Condition: reconditioned (used), Year of construction: 2005, operating hours: 15,604 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,050 mm, filling opening length: 1,250 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 700 mm, bale weight: 500 kg, total width: 1,700 mm, total height: 2,400 mm, total length: 7,800 mm, input voltage: 400 V, input current: 64 A, overall weight: 12,500 kg, transport height: 2,400 mm, power: 30 kW (40.79 HP), year of last overhaul: 2024, volume flow: 160 m³/h, transport width: 1,700 mm, transport length: 7,800 mm, tank capacity: 600 l, Hello, We are offering you a used baler from the manufacturer Presto GmbH & Co. KG, type HPK 50 B, subject to change. Iaedpfxjuan Hzj Ah Nel The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot guarantee their accuracy or completeness. Manufacturer Presto GmbH & Co. KG Type HPK 50 B Year of manufacture 2005 Pressing force of main press 50 t Drive power 30 kW Total connected load 31.5 kW Rated current 64 A Throughput under operating conditions with a bulk weight of 60 kg/cbm approx. 6.7 t/hour Machine weight of press 12.5 t Note: The machine is currently in our workshop for overhaul and is expected to be tested and ready for sale in February. The machine documentation is available in German. A viewing of the press is possible by appointment in our workshop. We would be pleased if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: used, Year of construction: 2008, functionality: fully functional, Machine Name: Hydraulic Tire Vulcanizing Press with Two Stations 2. General Information Manufacturer: Harburg-Freudenberger Maschinenbau GmbH (Rubber Technology Division) Model / Type: KHP 52-180 Year of Manufacture: 2008 Order Number: 70 825 00 225 Station Identification Left Station (Serial Number): 4L Right Station (Serial Number): 4R Control Interface Iajdpfxex I Dyqj Ah Nol System: Rockwell Automation / Allen-Bradley PanelView Plus 700 Control Elements: Integrated physical pushbutton panel 3. Technical Data / Specifications - Configuration: Vertical hydraulic curing press with two chambers Pressure Values Maximum Pressure: 240.2 bar Test Pressure: 343.8 bar Test Date: January 2008 Electrical Cabinet - Designation: Cabinet D11 Inventory Labels: "4019311" / "99" Hydraulic System - Unit Configuration: Rear-mounted green hydraulic tank and manifold system - Components: Rexroth hydraulic valves and gauges (visibly installed) Loading Mechanism - System: Automatic loading system for green tires - Mold Handling: Segmented mold handler Auxiliary Control System - Control Panel: Secondary pneumatic/hydraulic valve control panel - Manufacturer: Rockwell Automation - Installation Location: Mounted at belt conveyor infeed

Condition: new, Year of construction: 2024, Machine description: Gantry nailing machine for the pallet and packaging industry Manufacturer: Stoiber GmbH Model: StoNail 7000 RT Year of manufacture: 2024 Condition: New Price & Location: Price on request 4122 Arnreit Description: • Semi-automatic gantry nailing machine with rotary turntable (R) and pallet stacking robot for the production and stacking of various types of pallets and crate parts. • For the insertion of loose blocks and boards, the machine features a rotary turntable with two working areas. In combination with the pallet stacking robot, this ensures optimal material flow. • The nailing bridge is equipped with up to 6 individually controlled nailing units for jumbo coil nails (approx. 6,000 nails) and provides maximum flexibility for nailing your products. • Machine operation and programming of new pallet types is performed via a touch display. Existing programs can be retrieved from memory at any time. Entered parameters are visualized on the touch display, eliminating the need for manual positioning to teach nailing points! • NEW – Pallet stacking robot Technical data: • Max. pallet size: 3,000 x 1,700 mm per side • Max. nail length: 130 mm • Jumbo coil: approx. 1,000 nails/coil • Production capacity: 400 – 600 pallets/8 h Iodpfxerallrs Ah Nsal • Operators: 1 – 2 persons • Low operating and maintenance costs

Condition: used, Year of construction: 2021, functionality: fully functional, Machine name: Hydraulic Tire Vulcanizing Press with Two Stations General Information Manufacturer: HF TireTech Group (Harburg-Freudenberger Maschinenbau GmbH) Model / Type: MCP 52-180IC Year of manufacture: 2021 Order number: 7782500896 Station identification: Left station number: 1L Right station number: 1R Asset number: "D09" Control interface: Allen-Bradley PanelView Plus terminal with manual override switches Isdpfxox I A Nqo Ah Neal Technical Data / Specifications Configuration: Vertical dual-chamber curing system Hydraulic system: Manufacturer: Parker Motor: Electric motor, mounted on top of the blue reservoir Tank: Blue steel tank with integrated level monitoring Loading system: Automatic green tire loading mechanism with forward-facing chucks

Condition: new, Year of construction: 2024, Board stacking system: Manufacturer: Stoiber GmbH Model: StoStack 5000 - layer stacking Year of construction: 2024 Condition: New Price & Location: Price on request AT - 4122 Arnreit Description: Universal board stacking system for efficient stacking of rough sawn boards, posts, battens and planed goods. Advantages of the system: - Fully automatic, flush stacking - Air gap stacking - Simple operation via touchscreen - No pneumatics, therefore unrestricted operation even in frosty conditions Technical data: Iajdpstv E D Uofx Ah Nel - Flexible stacking width: up to 1200 mm - Stacking height: up to 1200 mm - Board length: from 1500 mm - Board/post width: 50 - 300 mm - Board/upright height: 15 - 120 mm - Maximum board/post weight: 75 kg - Maximum layer weight: 500 kg - Cycle rate: up to 25 pieces per minute Options: - Alignment rollers for longitudinal alignment of sawn timber - Ejector for ejecting faulty boards - Electrically adjustable side stands - Mobile machine frame: Use in several working positions by moving the machine on rails or with a forklift

Condition: used, Year of construction: 2012, functionality: fully functional, Machine Name: Hydraulic Tire Vulcanizing Press with Two Stations General Information Manufacturer: Harburg-Freudenberger Maschinenbau GmbH (Rubber Technology Division) Model / Type: KHP 46-150 Year of Manufacture: 2012 Order Number: 70 825 00 382 Iajdpfx Ahox Iu Aie Njl Station Identification: Left Station Number: 6L Right Station Number: 6R Asset Number: “D03” Control Interface: Allen-Bradley PanelView Plus 700 with integrated keypad module Technical Data / Specifications Configuration: Vertical dual-chamber curing press Pressure Values: Maximum Pressure: 250 bar Test Pressure: 360 bar Control Cabinet: Label: Control Cabinet D03 Inventory Tag: “4023489” / “91” Hydraulic System: Unit Manufacturer: Parker / Harburg-Freudenberger Tank Manufacturer: HF-Belisce (Test Date: 06.2012) Motor: Electric motor, vertically mounted on tank Loading Mechanism: Automatic loader arms for green tires with extendable clamping chucks

Condition: used, Year of construction: 2021, functionality: fully functional, Manufacturer: HF TireTech Group (Harburg-Freudenberger Maschinenbau GmbH) Model / Type: MCP 52-180IC Ijdpfx Asx Iuufeh Nsal Year of manufacture: 2021 Order number: 7782500896 Station Identification: Left station number: 3L Right station number: 3R Asset number: "C10" Control interface: Allen-Bradley PanelView Plus (touchscreen with physical control arrangement) Technical Data / Specifications Configuration: Vertical press system with two cavities Hydraulic unit: Manufacturer: Parker Components: Integrated blue hydraulic tank with level indicator and motor/pump assembly Control cabinet: Designation: Control cabinet C10 Branding: HF TireTech Group