Used Edm for sale (803)

Condition: ready for operation (used), Year of construction: 2007, operating hours: 24,088 h, functionality: fully functional, machine/vehicle number: 073C1923, workpiece weight (max.): 1,000 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 410 mm, overall weight: 3,100 kg, TECHNICAL DETAILS Travel Paths X-axis travel: 550 mm Y-axis travel: 370 mm Z-axis travel: 410 mm Hnsdjw Nf R Eopfx Afiju U-axis travel: 120 mm V-axis travel: 120 mm Maximum workpiece weight: 1,000 kg MACHINE DETAILS Weight: 3,100 kg Machine hours: 24,088 h

Condition: used, table length 400 mm table width 300 mm Hnsdpfx Aovwgq Ssfisu x-travel 300 mm y-travel 250 mm z-travel 250 mm weight of the machine ca. 1,2 t dimensions of the machine ca. 2000 x 1200 x 2500 mm

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 256 mm, total height: 2,220 mm, total length: 2,400 mm, total width: 2,800 mm, workpiece height (max.): 250 mm, workpiece width (max.): 650 mm, workpiece length (max.): 1,050 mm, overall weight: 4,500 kg, AGIECUT Vertex 3 Year of manufacture: 2007 Travel distances: X = 500 mm, Y = 350 mm, Z = 256 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.07 – 0.33 mm Submerged wire EDM machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Incl. AGIEJOGGER handbox for convenient setup Incl. AGIESETUP 3D AGIEVISION 5 control system AGIE IPG-V generator Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg Hnodpfxjw Dn Svo Afisu The machine will be cleaned, overhauled, and extensively tested by us after receipt of order. Including user training at Techma on your refurbished machine Optional: Transport, commissioning, training, chiller

Condition: excellent (used), Year of construction: 2017, travels: x 400 mm y 300 mm z 220 mm Wear-free tubular direct drive Water bath incl. cooler Hnsdpom Uyuxofx Afisu Automatic wire threading

Condition: used, Year of construction: 2003, functionality: fully functional, Controller FANUC 180 iS-W X travel 320 mm Y travel 220 mm Z travel 180 mm U travel 120 mm V travel 120 mm Rapid speed (X,Y,Z/U,V) 900 mm/min / 450 mm/min Max size of wpc. = L x W x H = 600 x 400 x 180 mm Hjdpfxsw Afyzo Afijnu Max weight of wpcs. 500 kgs Dimensions of dielectricum tank = 800 x 600 x 470 mm Power required 13 kVA Weight 1200 kgs

Condition: used, Year of construction: 1994, table length 750 mm table width 550 mm ampere 60 A Control Makino MGE20 x-travel 600 mm y-travel 400 mm z-travel 250 mm workpiece weight 450 kg tool change unit 8 weight of the machine ca. 5,00 t Hsdpovxwygofx Afijnu dimensions of the machine ca. 3,00 x 3,50 x H3,00 m Die-sinking machine with control MAKINO MGE20

Condition: like new (used), Year of construction: 2022, Electrodes: Diameter from 0.3 mm to 3 mmSpindle head Z-axis travel: 280 mm7J axis spindle travel: 380 mmSingle-channel electrode length: 400 mmMaximum spindle feed rate: 1500 mm/minWorktable dimensions: 440 mm x 320 mmManual X and Y axis travel: X = 400 mm, Y = 300 mmMaximum distance between guide and table: 300 mmMaximum current: 30 ASpindle rotation speed: 0–200 rpm (adjustable)Maximum power: 4 KWPower supply: 380V / 50 HzAxis readout: 3 axesWater pressure: 8 MPaMaximum table load capacity: 380 KGWorking fluid: Deionized waterWater tank with pump: Electric pump includedIncluded accessories: Chuck, 2 guides (0.5 mm and 1 mm), sealing joints, single-channel electrode tubes Hjdpfxewnffnj Afisnu The technical data and illustrations are not binding. They are not warranted characteristics and are subject to change.

Condition: used, Year of construction: 2004, functionality: unexamined, machine/vehicle number: 80.4055.0109, workpiece weight (max.): 1,000 kg, travel distance X-axis: 450 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 360 mm, table width: 700 mm, overall weight: 9,000 kg, table length: 500 mm, Makino EDNC 43 CNC Sinker EDM CNC sinker EDM machine (electrical discharge machining) Control: Makino MGF / MGF‑20 / MGF‑60 – stable and widely used in industry Working axes: X = 450 mm, Y = 350 mm, Z ≈ 350 mm Table: 700 × 500 mm, load capacity up to 1000 kg C‑Axis: full rotation – ideal for rotary electrodes Hodpfx Aewww Sxefijnu

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, workpiece weight (max.): 400 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, total height: 2,200 mm, total length: 2,500 mm, total width: 2,500 mm, workpiece height (max.): 250 mm, workpiece width (max.): 680 mm, workpiece length (max.): 900 mm, overall weight: 3,000 kg, The GF AgieCharmilles CUT 20P, manufactured in 2013, is a high-performance, precise used wire EDM machine specifically engineered for demanding applications in the metalworking industry. Thanks to advanced technology and intelligent control, the CUT 20P delivers outstanding cutting quality, minimal maintenance requirements, and excellent return on investment. Main Features & Advantages: ✅ Compact design: Workpiece dimensions: max. 900 x 680 x 250 mm Maximum workpiece weight: 400 kg Travel ranges X/Y/Z: 350 x 250 x 250 mm U/V: ± 45 mm Taper cutting up to ± 25° / 80 mm ✅ High-precision machining: Positioning accuracy via glass scales Automatic wire tensioning for consistently precise cuts Surface finish quality up to Ra < 0.25 µm ✅ Efficient wire system: Wire diameter: 0.15–0.30 mm Automatic wire threading and re-threading 25 kg wire spool for extended operating periods ✅ Intelligent control & user-friendly operation: Windows-based control system with intuitive user interface 15” LCD display for easy programming DXF import & 3D graphic check for precise simulations ✅ Reliability & low operating costs: Energy-efficient generator with low power consumption (9 kVA) Low maintenance costs due to robust construction and durable wear parts Integrated collision protection for maximum safety Ideal for: ✔ Tool & mould making ✔ High-precision components ✔ Series production & prototyping Hnedpfew Dn Rljx Afiju Achieve maximum productivity with the GF AgieCharmilles CUT 20P – The optimal choice for precise and cost-effective wire EDM! 📌 Our used machine from 2013 is professionally cleaned, overhauled, and thoroughly tested prior to sale in order to ensure the highest quality and reliability. 📩 Contact us for a tailored quote or to arrange a demonstration! We are also happy to offer commissioning and on-site training on the machine.

Year of construction: 2007, condition: ready for operation (used), General Data Measurements width 2010 mm Measurements depth 1234 mm Hnjdpfewygmwjx Afieu Measurements height 2550 mm Machine weight 4000 kg Main Drive Spindle motor power 16 kVA Additional Equipment Load Capacity for Automatic Electrode Change: 15 kg This 3-axis OPS INGERSOLL Eagle 400 die-sinking EDM machine was manufactured in 2007. Ideal for precise metal removal processes, it offers robust construction and reliable performance. If you are looking to get high-quality die-sinking capabilities, consider the OPS INGERSOLL Eagle 400 machine we have for sale. Contact us for more information. Application Types EDM

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 576409, OPS INGERSOLL GANTRY EAGLE 1200 Year of construction 2017 Machine No. 576409 Standard Specifications 1.01 Eagle Powertec PC/NC * Multiprog Powertec technology programming on PC/NC and as CD (external programming place) * Powertec Easy Burn high-speed programming * Powertec Handheld - multi-functional hand control device * Manual eroding with Powertec Handheld * Interfaces Ethernet and USB 　 * Multi-control light (remote maintenance via Internet), free of charge during the guarantee period 1.02 Eagle Powertec fine finish generator PT60 1.03 Eagle Power Jump with 18m/min interval speed in the Z-axis 1.04 Pressure flushing programmable, suction connection manually 1.05 Filter unit, 32m² paper filter Hnedpfx Afswu Hb Rsisu 1.06 Compressor cooler 1.07 CO2 fire-extinguishing system 1.08 Color: Structural lacquer in cobalt-blue (RAL5013), grey (ral 7045), yellow (RAL1021) 1.09 Machine shoes Feature Specification XYZ travels 1 000 × 1 500 × 700 mm Tank size 1 270 × 1 770 × 680 mm Table size 1140 ×1640mm Table load capacity 7 500 kg Max head load 300 kg Rapid traverse 5 000 mm/min High-speed Z jump 18 000 mm/min (18 m/min) CNC Control Dual 32-bit PC, touchscreen, USB/Ethernet Generator (PT60) Adaptive current, 60 A Dielectric volume & filter 2 400 L, 32 m² filter Machine size & weight 2 950 × 3 950 × 3 440 mm, ~12 000 kg

Condition: like new (used), Year of construction: 2017, operating hours: 9,830 h, The machine has not been used for several years so we want to sell it. It is in very good condition. Hnodswimu Hepfx Afieu

Condition: defective spare-parts repository (used), Year of construction: 1995,  Machine with breakdown (unknown) proposed for spare parts. Hedpfx Aewzifxjfionu

Condition: ready for operation (used), Year of construction: 2007, operating hours: 33,995 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 525 mm, workpiece height (max.): 510 mm, workpiece width (max.): 1,000 mm, workpiece length (max.): 1,300 mm, Wire EDM machine has been recently serviced and cleaned! TECHNICAL DETAILS Travel X-axis: 800 mm Travel Y-axis: 550 mm Travel Z-axis: 525 mm Workpiece dimensions Workpiece height: max. 510 mm Workpiece width: max. 1,000 mm Workpiece length: max. 1,300 mm MACHINE DETAILS Type of input power: Three-phase current Total weight: 6,800 kg Operating hours Power-on hours: 108,824 h Hjdpfswzhqmjx Afionu Working hours: 33,995 h

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, AGIECUT Excellence 2F eCUT Year of manufacture: 2006 Travel paths (X/Y/Z): 350 x 250 x 256 mm Travel paths (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without bath): 200/450 kg Best achievable surface finish: 0.1 µm Ra Max. cutting rate in cylindrical cut: 300 mm²/min Available wire diameters: 0.07 – 0.33 mm Includes AGIE universal clamping frame Includes AGIE JOGGER handbox Includes console with 4x USB ports Includes AGIE-Setup 3D Hnodpfxewwr H Rj Afisu The machine has been cleaned, overhauled and thoroughly tested by our technicians. We are happy to offer commissioning and training as well.

Condition: ready for operation (used), SARIX ID 500122 Rotation module SN: 00000739 for Microfor HP4-EDM posalux, used, good condition, 100% functional, scope of delivery as per photos Hjdpfx Asmq H Uyjfijnu

Condition: excellent (used), Year of construction: 2015, operating hours: 9,014 h, functionality: fully functional, machine/vehicle number: MV2400S, overall weight: 3,500 kg, total length: 2,687 mm, total width: 3,030 mm, total height: 2,150 mm, input voltage: 400 V, input current: 50 A, type of input current: three-phase, input frequency: 50 Hz, Accessories: - ODS optical drive system - Tubular Direct Drives on X, Y axis - Scale on X, Y axis - Intelligent automatic wire feeding system (wire diameter 0.1 - 0.3 mm) - (Can be used both dry and underwater) - Wire straightening system - Automatic wire cutter (for thicker wires) - Automatic hole search - MITSUBISHI M700 controller - 3D CAD/CAM control system - 5 controlled axes + prepared for additional axes - PFC precision finishing (Precise Finish Circuit) - LLS long life system - 10 kg wire coil holder (receiver) - U-shaped hardened segmented receiving table - Compressor dielectric (water) cooler equipment - Remote communication preparation (mcAnywhere) - CE version Hodpfx Afovvt Afeienu - H/W 30°/45° (30/45° cutting capability instead of 15° for 0.25 mm wire Controller: - MITSUBISHI ELECTRIC "ADVANCE Plus" control software. - MITSUBISHI M700 control with 3D CAD/CAM software. - 10 GB memory - 15" touch screen - Clear layout of the main functions on the screen. - Programming with ESPERADVANCE conversational system. - The controller is prepared to receive 3D files. - Graphical inspection: 3D, front view, side view, top view. - Hand-held control unit. - Ethernet TCP-IP and 2 USB connection options - Preparation for remote communication (mcAnywhere)

Condition: good (used), Year of construction: 2004,   Chuck type: EROWA Electrode changer: X-Axis Travel (mm): X-Axis Travel (mm): X-Axis Travel (mm): CNC Type: Worktank length: Worktank width: Worktank height: Table length: Table width: Max. workpiece length: Hnjdpfswtzdwjx Afieu Max. workpiece width: Max. workpiece height: Max. workpiece weight (kg): Max. machining current (A): Length x width x height: Weight (kg): Worked power hours: The technical data and illustrations are not binding. They are not warranted characteristics and are subject to change.

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, GF AgieCharmilles CUT 300 Sp Year of manufacture: 2015 AC CUT HMI control Hnedpfx Afowwr Egoisu Travel paths (X / Y / Z): 550 x 350 x 400 mm Travel paths (U / V): 550 x 350 mm Max. taper angle: +/- 30° at 400 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Cutting speed: 400 mm²/min Best surface finish: Ra 0.10 µm Available wire diameters: 0.15 to 0.33 mm Complete system dimensions: 2600 x 2600 x 2340 mm Total system weight: 3,300 kg The machine will be cleaned, fully overhauled, and function-tested by us upon receipt of order. A 6-month warranty is provided on the machine. We are happy to offer commissioning of the machine as well.

Condition: ready for operation (used), SARIX ID 501014 AXIS SN: 00020217 for Microfor HP4-EDM posalux, used, good condition, 100% functional, scope of delivery as per photos Hnodpfx Afsmq Iaajieu

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 3,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 525 mm, GF AgieCharmilles Progress V4 Year of manufacture: 2008 Travel paths: X= 800 mm, Y= 550 mm, Z= 525 mm Travel paths: U= 800 mm V=550 mm Maximum taper: 30° at 500 mm height Maximum workpiece dimensions: 1300 x 1000 x 510 mm Maximum workpiece weight: 3000 kg Hodjwvqwrepfx Afisnu Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 500 mm²/min Available wire diameters: 0.15 – 0.33 mm Submerged-type machine with automatic wire threading and re-threading after wire breakage With automatic front door Includes AGIEJOGGER hand-held box for convenient setup AGIE IPG-V generator AGIEVISION 5 control Dimensions (length x width x height): 2900 x 3050 x 2850 mm Net weight: 6000 kg The machine will be cleaned and overhauled upon receipt of your order. You will receive a 6-month warranty on all machine components. We are also happy to offer commissioning and training services.

Condition: ready for operation (used), SARIX ID 501015 Server module SN: MK116487 for Microfor HP4-EDM posalux,used, good condition, 100% functional, scope of delivery according to photos Hsdpfxemq Iadj Afisnu

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, total height: 2,220 mm, total length: 1,640 mm, total width: 2,040 mm, workpiece height (max.): 250 mm, workpiece width (max.): 750 mm, workpiece length (max.): 550 mm, empty load weight: 2,580 kg, Equipment: documentation/manual, AGIECUT Progress 2 Year of manufacture: 2004 Travel path: X = 350 mm, Y = 250 mm, Z = 256 mm U/V-Axis travel path: +/- 70 mm Maximum taper angle: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 kg (submerged) / 450 kg (dry) Achievable surface quality: Ra: 0.30 µm Maximum cutting speed: 500 mm²/min Glass scales on X and Y axes for increased precision Available wire diameters: 0.20 – 0.33 mm Submerged wire EDM machine with automatic wire threading and re-threading after wire breakage Manual front door (accessible from one side) Including AGIEJOGGER handbox for convenient setup AGIE IPG generator with power module AGIEVISION control system Dimensions (L x W x H): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and thoroughly overhauled upon receipt of an order. A test cut with optimal surface finish is performed for final approval. We are happy to offer on-site commissioning and training. Optional: - Transport Hsdpfx Afewvqk Ssisnu - Chiller unit - Clamping devices

Condition: ready for operation (used), SARIX ID 501014 AXIS SN: 00000370 for Microfor HP4-EDM posalux, used, good condition, 100% functional, scope of delivery as per photos Hnjdsmq H U Sopfx Afisu

Year of construction: 2002, condition: refurbished (used), AGIETRON IMPACT 2, year of manufacture 2002; AGIEVISION 3 control, Pentium III Travels: X = 350 mm, Y = 250 mm, Z = 350 mm; Max. workpiece dimensions (L x W x H): 650 x 580 x 250 mm o. 820 x 420 x 250 mm Max. workpiece weight: 400 kg Distance table to quill: 170-520 mm Quill with automatic chuck of choice (Erowa / 3R Systems); 28-position electrode changer; Working tank can be lowered for optimum accessibility; Incl. C-axis for rotation, indexing and erosion (U=0-60 rpm); AGIE IPG high power generator with 72 A Removal rate copper/steel: 450 mm³/min Removal rate graphite/steel: 530 mm³/min Best achievable surface Ra 0,2 µm 10,4" LCD colour screen, lift keyboard and mouse, JOGBOX for axis procedure Hnedpfx Afsg H I Spsiju Machine weight (net): 3200 kg Machine dimensions (L x W x H): 2689 x 1855 x 2593 mm Incl. 6-month warranty on parts and service; Incl. commissioning and instruction on site; Free loading! Optional: Transport, cooler, oil, clamping device