Used Edging Saw for sale (9,042)

Condition: used, Year of construction: 1994, Edge thickness 0.3 - 20 mm, edgeband height: max. 66 mm, edgeband length: min. 200 mm, workpiece width min. 60 mm, workpiece length min. 140 mm, workpiece thickness: min. 6 mm, max. 60 mm, feed speed 8 or 16 m/min - Edgebanding with Ultra - Granupress - End trimming with 2 saws, 0 - 15° tiltable - Milling, radius / flush - Corner copying - Scraper - Pneumatic buffing Location: Nattheim Kjdpfovvkdtjx Ad Newt

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Kedpfjvvkd Tsx Ad Nswt Storage location: Nattheim

Condition: used, Year of construction: 1996, max. cutting width: 5300 mm max. cutting height: 2200 mm saw blade diameter: 300 mm max. machining thickness: 80 mm saw blade bore: 30 mm Kwsdpfjvvkq Hsx Ad Nst material support: plastic slats measuring system: scale saw head tilting: manual saw feed: manual dust extraction: external extraction saw beam locking: manual weight approx.: 1500 kg dimensions: 6300 x 1500 x 2900 mm motor power: 5.5 kW storage location: Nattheim

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Kwodovvkfdjpfx Ad Not

Condition: used, Year of construction: 2001, Edge thickness 0.2 - 6 mm Workpiece dimensions Width min. 70 mm Height min. / max. 8 / 42 mm Length min. 150 mm (strip edges) Feed speed: 12 m/min Glue application roller Machine dimensions L x W x H = 3500 x 900 - 1300 x 1250 mm Weight: approx. 1130 kg Power consumption: approx. 6.0 kW, 400 V, 50 Hz Equipment: - Double top pressure with manual height adjustment - Automatic magazine for roll edges up to 800 mm DM - Rapid heating tank with application roller in synchronous and counter-rotating direction - Pneumatic adjustment and resetting of all work units - Pneumatic cross-cutting shears for strip edges up to 3 mm - Manually adjustable infeed ruler - Double cross-cut saw 2 HF motors 0.2 kW, 12,000 n 2 automatic Positions = 0 + 3 degrees - Milling/flush trimming unit with two HF motors 0.43 kW, 12,000 n. Two-sided scanning with two HF indexable cutter heads. Radius scraper, automatically controlled. Flat scraper, automatically controlled. Storage location: Nattheim Kedpfx Ajvvkfqjd Newt

Condition: used, Year of construction: 2002, Machine length: 6240 mm Weight: 2400 kg Power consumption: 14 kW Extraction diameter: 120 / 140 mm Kwedpfxjvvkfwe Ad Net Storage location: Nattheim

Condition: used, Year of construction: 2001, Cutting width: 3300 mm Cutting length: 3350 mm Weight: approx. 4000 kg Saw blade projection: 100-(115) mm Saw carriage: Feed speed: 100-(130) m/min. Return speed: 100-(130) m/min. Main saw blade: 400-(430) mm Motor: 7.5-(11-13.2) kW Scoring unit: 215 mm Motor: 2.2 kW Pusher: Rapid feed: 160 m/min. Return speed: 60 m/min. Extraction: Air speed: 30-35 m/sec. Extraction nozzle: 200 mm / 115 mm Compressed air: Pressure: 5-6 bar Consumption: 20-30 l/min. Storage location: Nattheim Kwodjvvkqgspfx Ad Nst

Condition: used, Year of construction: 2011, Pneumatic milling adjustment (Straight/Radius) Combination milling station R=2 Corner rounding cutter R=2 to 40 mm Jointing cutter up to 40 mm Flat scraper Profile scraper R=2 Short workpieces PLC control with Pro Face touchscreen Nesting Cooling/antistatic spray - airtronic Protective spraying Kante Riepe incl. interchangeable tank Workpiece thickness 8 - 60 mm Mechanical edge clamping Extraction nozzle: 140 mm Dimensions: Length with extension: 4984 mm Depth with roller table: 1425 mm Max. height: 1618 mm Worktable height: 888 mm Weight: 1400 kg Kjdpoxyiiljfx Ad Newt Storage location: Nattheim

Condition: used, Year of construction: 1992, Max. cutting width: 5300 mm Max. cutting height: 2200 mm Saw blade diameter: 300 mm Max. processing thickness: 80 mm Saw blade bore: 30 mm Bottom support: Fixed rollers Saw head pivoting: Manual Saw feed: Automatic Extraction: External extraction Approx. weight: 1500 kg Motor power: 5.5 kW Kwodpfovvkq Tox Ad Nst Storage location: Nattheim

Condition: used, Year of construction: 1985, Cutting length: 3100 mm Cutting height: Adjustable from 0-45 mm Saw unit: Powerful three-phase motor 220/380 volts, 1.8 kW power Clamping bar at the top with a handwheel Kodsvvkazspfx Ad Njwt Storage location: Nattheim

Condition: used, Year of construction: 1981, Wheel diameter: 800 mm, max. blade length: 5600 mm, min. blade length: 5450 mm, max. cutting height: 500 mm, max. cutting width: 780 mm, tilt-able table: yes, frame side: left, automatic motor brake: no, blade guide position: top and bottom, blade guidance: roller guide, design: stationary, working height or feed table height: 950 mm, weight approx.: 720 kg, dimensions: 1480 x 900 x 2440 mm, motor power: 4.0 kW, extraction diameter: 125 mm Location: Nattheim Kwedjvvkmnjpfx Ad Njt

Condition: used, Year of construction: 1973, With a left-hand circular saw that can be swiveled to 45°. Cutting size: 2200 x 2500 mm. 3 motors, each with 4.5 kW. Both cross-cut saws can be swiveled to 45° - 90°, each with a scoring motor. All three saws can be driven up to 400 mm in diameter. Minimum cutting width: 210 mm. Both scoring saws are pneumatically displaced forward and backward. With vacuum suction cups for panel securing. Storage location: Nattheim Kedpfx Adsvvkm Ie Nswt

Condition: used, Storage location: Nattheim Ksdpfxevvkrdj Ad Njwt

Condition: used, Max. blade length: 5600 mm Roller diameter: 800 mm Max. cutting height: 520 mm Max. cutting width: 770 mm Table tiltable: Yes Stand side: Left Stop ruler: Yes Saw blade guide: Roller guide Design: Stationary Weight approx.: 800 kg Kedpfx Adovvkmue Newt Storage location: Nattheim

Condition: used, Material clamping via handwheel. Cutting length 3000 mm. Max. cutting height 60 mm. Kwsdpsvvkblofx Ad Not Storage location: Nattheim

Condition: used, Roller diameter: 800 mm Max. cutting height: 440 mm Max. cutting width: 785 mm Table height: 970 mm Table dimensions: 1170 x 800 mm Blade width: 40 x 7/10 mm Blade length: 5630 mm Extraction diameter: 120 mm Dimensions: 1625 x 940 x 2516 mm Weight: 770 kg Kwjdpfx Ajwayzbod Njt Storage location: Nattheim

Condition: used, Year of construction: 2006, EVA glueing, 2 pressure rollers, cross-cutting station, pre-milling cutter and rounding cutter, surface scraper, transport device Kwjdpfevvkg Iox Ad Net Storage location: Nattheim

Condition: used, Year of construction: 2004, Saw unit: pivots 45°. Carriage length: 3200 mm. Maximum saw blade diameter: 450 mm. Saw blade bore: 30 mm. Motor power: 7.5 kW. Max. Cutting width: mm Control panel: at eye level Height adjustment: input via keyboard Tilt adjustment: input via keyboard Tilt angle display: digital Cutting width display: digital Table extension length: yes Cross-cutting at the cross stop: 3200 mm Cross stop display: scale Scoring device adjustment: electric Scoring blade: PSV Protective cover: yes End position lock: yes Automatic motor brake: yes Speeds: 2500/3500/5000 rpm Description: Cutting height at 450 sheets, 150 mm Weight approx.: 1180 kg Dimensions: 3200 x 1800 x 1800 mm Extraction diameter: 1 x 80, 1 x 120 mm Storage location: Nattheim Kwjdox Ngzaopfx Ad Net

Condition: used, Wheel diameter: 500 mm Kwedpfowl D S Uex Ad Not Storage location: Nattheim

Condition: ready for operation (used), total height: 1,915 mm, total length: 2,500 mm, total width: 1,290 mm, throat depth: 400 mm, empty load weight: 950 kg, nominal power: 6 kW (8.16 HP), Rond materiaal: Ø 400 mm Rechthoekig: 400 x 400 mm Maximaal materiaalgewicht: 1000 kg/m Snijsnelheid: 20 tot 110 m/min Afmetingen zaagblad: 5090 x 41 x 1,3 mm Hydraulische klemming spaantransportband Max height of workpiece: 400 mm Sawspeed: 20-110 m/min Length of band saw: 5700 x 41 x 1.3 mm Kedpfsxpymajx Ad Njwt

Condition: excellent (used), Year of construction: 2022, operating hours: 105 h, Sliding table panel saw with a movable carriage and saw blade tiltable up to 46°, designed for safe operation and requiring 50% less space compared to a conventional sliding table saw and beam saw combined. Simple and fast programmed adjustments via the "Ready" control from the operator panel. Immediate positioning is ensured by a motorized and programmable rear fence, providing fast and precise workpiece alignment. Robust and reliable telescopic fence with scale and two flip stops: Panel cutting up to 2500x3200 mm (optionally 3200x3200 mm). The large fixed table ensures optimal support of the panel during processing. Technical data Class: px 350i Max. sliding carriage travel [mm]: 2600 / 3200 / 3800 Saw blade tilting range [°]: 0÷46 Max. saw blade diameter (cutting) [mm]: 350 Max. saw blade diameter (milling + cutting) [mm]: 300 Max. cutting height (D350) from table at 90°/45° [mm]: 105/72 Max. cutting height (D300) from table at 90°/45° [mm]: 80/50 Saw blade rotation speed [rpm]: 4000 Cutting width at rear fence [mm]: 1300 Other technical features: Three-phase motor: 7 kW, 50 Hz Extraction hood diameter [mm]: 120 (1) - 100 (2) Kjdpfxeyb T Trj Ad Newt Dimensions [mm]: L 3859, H 1368 Location: ex works customer - Available at short notice -

Condition: used, Year of construction: 2012, cutting diameter 410 mm saw band length 5800 x 41 x 1,3 mm table height 750 mm 430 mm 410 mm 700 x 410 mm 410 mm cutting speed 500 x 410 mm down speed 320 mm dimensions of saw-band 320 x 410 mm workpiece weight 15 - 150 m/min 5,5 kW work height max. 3200 kg connected load 4500 x 2800 x 2000 mm Equipment: - Automatic cutting pressure and feed rate monitoring - Frequency-controlled AC drive 15-150 m/min, 5.5 kW - Hydraulic full-stroke material clamping - Automatic movement of the clamping vices - Automatic saw frame height adjustment - Minimum speed and saw blade monitoring - Electric miter tilting via servo motor - Visualized program input with CNC control - Integrated MEBA gripper infeed system from 5-2300 mm per stroke with integrated roller conveyor roller conveyor *Special equipment: - Laser light for cutting line display/ scribing saws - Driven chip brush - Micro dosing system - Clamping pressure regulation Kedpfoyb S Emox Ad Njwt - Material bundle clamping - Job menu - Material database - Zero stop - Scraper belt conveyor for optimum chip removal, 2000 mm length - Cutting process control

Condition: ready for operation (used), Machine is disconected from power. Ksdpfehva I Iex Ad Nswt

Condition: used, Edge finishing machine Rehnen Type KBA for automatic processing and rounding of edges on wood and panel materials. The machine is suitable for precise grinding, deburring and rounding of workpiece edges and enables a consistently high surface quality. Ideal for carpentry, furniture construction and industrial wood processing. Includes spare abrasive belts and cutters. workpiece height: 20-90 mm Kedpfx Adoyb Sdcs Njwt Unit 1: Grinding unit, oscillating Unit 2: Milling unit top and bottom Unit 3: Profile grinding unit equipment: For edges R5

Condition: used, Year of construction: 2004, total length: 3,600 mm, total width: 1,800 mm, total height: 1,750 mm, Weight: 970 kg Price: On request - Year: 2004 - Documentation available: No - CE certificate present: No - Serial number: AB/166667 - Roller table length [mm]: 3200 - Table width [mm]: 1040 - Min. saw blade diameter [mm]: 300 - Max. saw blade diameter [mm]: 400 - Options: Scoring unit - └ Spindle speed pre-cutter [rpm]: 8500 - Spindle speed: Ksdoxdlxkepfx Ad Njwt - └ Min. spindle speed [rpm]: 3000 - └ Max. spindle speed [rpm]: 5000 - Voltage [V]: 400 - Current consumption [A]: 18 - Transport dimensions: 3600mm x 1800mm x 1750mm (l x w x h) - Transport weight [kg]: 970kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels