Used Edging Saw for sale (9,668)

Year of construction: 2007, condition: ready for operation (used), Control Unit Brand HOLZMA Model CADmatic 4 - Professional Main Drive Main motor power 18.0 kW Additional Equipment Air cushion table with roller element 2160 x 650 mm: 4 pieces Central blower: 1 piece This HOLZMA HPP 380 panel saw was manufactured in 2007. It features a robust steel saw carriage, main and pre-cut saws, and a patented Central Angle Return Device that reduces cycle time by up to 25%. The machine is equipped with a Power Control CADmatic 4 system, ensuring precise and efficient operation. The saw blade projection is 95 mm, and it operates with a main saw motor of 18.0 kW. For more information about this panel saw, please reach out to us. Application Types Lsdsxn U Hfepfx Ab Uohn Sawing (Wood)

Condition: like new (used), Year of construction: 2008, SPECIFICATION KB-45 Cutting capacity 455mm Maximum working height 255mm Table 600 x 500 mm Tilt 4 ways up to 15° Saw blade length 3490mm Saw blade width 3-16mm Saw blade speed 25-115m/min Butt welder capacity 3-16mm Motor size 1HP Weight 285 Kgs Height 2020mm Width 1100mm Depth 660mm STANDARD FEATURES Overload switch Single-phase / 3-phase supply Built-in saw blade and tire cleaning brush Saw blade welder, blade shear and grinder Slotting table Low-voltage halogen lamp Lhedpfou Rdr Rsx Ab Ujn Mitre guard for angled cuts Quick rip fence for straight cuts

Condition: used, Year of construction: 2021, Used machine Year of manufacture: 2021 Condition: As new, machine is unused Features and technical specifications: - Saw band speed: 850 / 430 m/min - Flywheel diameter: 530 mm - Saw band length: 3,865 mm (min. 3,840 mm / max. 3,872 mm) - Saw band guides: precision guides above and below - Max. cutting height at 90°: 270 mm - Max. cutting width with fence: 474 mm - Max. cutting width without fence: 514 mm - Worktable length: 535 mm (max. 685 mm) - Worktable width: 535 mm - Worktable height: 945 mm - Worktable extension length: 535 mm - Worktable extension width: 150 mm - Worktable tilt: -10° to +45° Note: From 20° tilt, for safety reasons a clamping device or fence is required to prevent the workpiece from slipping. - Extraction port diameter: 2 × 120 mm - Output: 2.25 kW Ledpfx Abow E Tzlo Ushn - Connection voltage: 400 V - Mains frequency: 50 Hz Scope of delivery: - Mitre fence ±60° - Laser device for cutting line marking - Saw blade set: 1 × Saw band 3865 x 10 x 0.5 mm, 4 TPI 1 × Saw band 3865 x 20 x 0.5 mm, 4 TPI 1 × Saw band 3865 x 25 x 0.5 mm, 4 TPI Dimensions: 1,020 × 850 × 1,982 mm Weight: 163 kg Availability: short-term Location: Saxony-Anhalt

Condition: good (used), Code: 0230 Brand: MAKITA Model: 5603R - CE Standard Circular saw with case for cutting wood, plastic, aluminum, and various materials - CE Standard Technical data: Lhodpfx Aexn Stceb Ujn Blade diameter mm 165 Motor 1100 W single-phase Rpm 5000 Max cutting depth at 90° mm 54 Max cutting depth at 45° mm 38 Weight kg 4,9

Condition: good (used), Crosscut saw, pull saw, miter saw, plunge saw -Remark: Unit made of slats/blinds production, without control -Saw blade: Ø 188 mm -Individual components: see photos Ledpfx Asp Dydqob Ushn -Dimensions: 1390/620/H1130 mm -Weight: 576 kg

Condition: excellent (used), Circular saw Ø 100 to 550 mm, tooth pitch 10 - 40 mm, tooth height 5 to 25 mm, grinding motor 370 Watt/380 Volt, large machine stand for favourable working height, including 2 clamping cones for circular saws with bores from 15 to 85 mm Ø Lhsdpslyqthsfx Ab Ujn

Condition: excellent (used), Year of construction: 1983, cutting height (max.): 120 mm, saw blade diameter: 350 mm, working width: 250 mm, Hardly used multi-blade saw from a training workshop 22 kW motor Chain width 250 mm Lhjdpfexqg Tiex Ab Uon 250 mm clearance on the right Max. cutting height 120 mm With wide additional roller conveyor for return, approx. 4 m long

Condition: new, Year of construction: 2025, Bandsaw Weipert G 5025 Blade size 2715 x 27 x 0.9 mm Blade tension mechanical (manual) Cutting speed 36, 72 m/min Lhodpewuvaisfx Ab Uen Arm descent adjustment stepless – via a hydraulic cylinder Vice height 765 mm Minimum material length in vice 100 mm Power supply 3-phase 400 V Total power S1 100%: 1.5; S6 40%: 2.1 kW Coolant pump motor power 0.025 kW Weight 370 kg

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, KASTOssb A2, year of manufacture 2008. Photos show the current condition; the machine is still being reconditioned. Technical data: - Cutting range round: 260 mm - Cutting range square (W x H): 260 x 260 mm - Smallest cuttable size: 10 x 10 mm - Shortest length of cut-off piece: 5 mm Lhedpsxn Ix Usfx Ab Usn - Shortest remnant length in single cut: 110 mm - Length: 1670 mm - Width incl. chip conveyor: 2080 mm - Height: 2130 mm - Machine weight approx.: 2200 kg - Total connected load: 9.5 kW - Saw motor power: 5.5 kW - Continuously adjustable cutting speed: 15 – 125 m / min - Automatic material feed length, single stroke: 600 mm - Automatic material feed length, multiple stroke: 9999 mm - Saw blade dimensions: 4,115 x 41 x 1.3 mm

Condition: good (used), Code: 0229 Brand: AGAZZANI Model: 800 Band saw for cutting wood, plastic, aluminum, and various other materials Technical data: Heavy structure Flywheel diameter mm 800 Max working height mm 600 Motor Hp 6,5 Tilting table Ledpfexn Sgcjx Ab Ushn Overall dimensions mm 1000 x 1850 x 2750 h Weight kg 870

Condition: ready for operation (used), MULTIBLADE PRIMULTINI MRA Lodpfx Abjxqgvws Ujhn cutting height 160 mm motors 110+110 kW conveyor 550

Condition: not inspected (used), for fast, exact cross-cutting of several timbers at the same time, which can be placed next to and/or on top of each other, max. travel approx. 3.3 m, total table length approx. 4.15 m, total table width approx. 0.85 m, max. clamping height approx. 160 mm, max. timber width approx. 220 mm, positioning drive with 2 electric disc brakes, positioning slide can be swivelled upwards, with 2 pneumatic clamping tongs with 4 spring-loaded clamping fingers each from above, 10 clamping tines from below, for self-assembly on a cross-cut saw Lodpfxoiqn D Ds Ab Ushn

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Bandsaw Metallkraft BMBS 230 x 280 H-DG with pivoting frame Works, we can send a video if required Lhedpjxqgiwjfx Ab Uon Can be tested on site under power

Condition: good (used), Technical parameters Maximum cutting capacity Round 650mm Square 650×800mm Saw blade Saw blade speed 20~80 m/min Saw size 54X1.6 Guides Ledpfsullzhex Ab Uohn Carbide and bearing blade guides Cleaning Wire brush & flood coolant Tension Hydraulic Motor power 7.5 kW Hydraulic 2.2 kW Coolant 0.12 kW

Condition: refurbished (used), Year of construction: 1999, functionality: fully functional, Semi-automatic vertical miter bandsaw Berg & Schmid VGS 500 HA-I Fully refurbished & fully functional + 4m infeed roller conveyor RS 400 + Measuring stop with roller conveyor LM 110 DH (digital & handwheel) Cutting ranges: - 90°: round: 330 mm; square: 330 mm; flat profile: 330 x 160 mm / 320 x 300 mm; upright profile: 160 x 160 mm; rectangular: 500 x 330 mm - 45° left: round: 300 mm; square: 300 mm; flat profile: 330 x 160 mm / 320 x 300 mm; upright profile: 180 x 160 mm; rectangular: 300 x 330 mm - 45° right: - 45° left: round: 300 mm; square: 300 mm; flat profile: 330 x 160 mm / 320 x 300 mm; upright profile: 160 x 160 mm; rectangular: 300 x 330 mm Technical data: - Motor: 2.0 kW / 400 V - Saw band speed: 18 - 110 m/min steplessly adjustable - Saw band dimensions: 4,140 x 34 x 1.1 mm - Weight: 1050 kg - Dimensions: 1900 x 2000 x 2200 mm Lsdpfx Aboxqfmne Ujhn Features: - Semi-automatic bandsaw with microprocessor control and hydraulic movement of the saw frame - Cuts in semi-automatic mode with variable angle up to 45° left or right, manual adjustment of the saw frame - Hydraulic vise - Electronic frequency inverter for stepless band speed - Automatic detection of cutting start and end - Saw arm feed rate adjustment via feed regulator - Mechanical blade tensioning monitored by microswitch

Condition: used, Year of construction: 2025, Horizontal Metal Band Saw with Swiveling Arm This horizontal metal band saw with a swiveling arm allows cutting in a plane perpendicular to the axis of the material and at any angle between 0° and 60°. The drive from the electric motor to the wheel driving the saw blade is transmitted through a mechanical gearbox (not a belt drive). The saw blade is tensioned on two cast iron wheels using a manual tensioner and guided through a set of bearing-mounted rollers. The material to be cut can be fed manually or with any mechanical feeding device, while the tool feed operates by gravity, based on oil flow in a dual-chamber hydraulic cylinder. The appropriate arm lowering speed is achieved using a valve that regulates the oil flow between the chambers. The blade guides are equipped with a set of bearing-mounted rollers, which significantly improve blade tracking, service life, straightness, cutting accuracy, and quality. The arm, featuring a rigid design, is made of profiled cast iron. A control panel is mounted on the arm. Lodpfoxqfaujx Ab Uohn The base is built as a rigid welded steel sheet body. Inside, there is a separate coolant tank with an electric pump. The upper part of the base is shaped to form a tray for coolant drainage and chip collection during the cutting process. A cast iron worktable is mounted to the base, along with a swiveling arm and a control panel mounted on a separate arm. During the cutting process, the main cutting motion is the movement of the saw blade, while the feed motion is the downward movement of the arm. The arm lowering speed (cutting speed) is regulated by the hydraulic cylinder. In the lower position of the arm (after the material is cut), the saw blade drive is automatically switched off. Safety is ensured by blade covers and micro-switches that stop the motor at the end of the cutting cycle or when any cover is opened. An additional safety feature automatically switches off the saw in the event of blade breakage. Technical Specifications Blade size: 2110 x 0.9 x 20 mm Motor: S1 100%: 0.75 kW Power supply: 230V 50 Hz Blade speed: 65 m/min (50 Hz) Weight: 173 kg Packaging dimensions: 1150 x 560 x 930 mm WARNING !!! The machine is a return item. Original packaging is missing, and paint color differs from standard.

Condition: not inspected (used), Year of construction: 1998, cutting width (max.): 5,300 mm, Equipment: rotational speed infinitely variable, scorer, Holz-Her 1230 Super Cut – Vertical Panel Saw – Scoring Unit – Digital Display Technical data: Cutting length: 5,300 mm Cutting height: 2,200 mm Cutting depth: 80 mm Motor: 5.5 kW / 4,500 rpm Feed rate: stepless up to 24 m/min Electric height adjustment, PLC control Extraction: 2 × Ø120 mm Air connection: 6 bar Equipment: Automatic horizontal & vertical positioning Digital readout for horizontal cuts Pneumatically swiveling saw unit Supercut scoring system Price: negotiable 6,500 Invoice with VAT, shipping available by arrangement Lhedpfx Ajxqd Udob Usn

Condition: good (used), Saw frame, guide rails, connecting rods, feed rollers, new roller shafts, racks, new rack heads, roller lifting hydraulic unit, gang saw frame stand with overhang plates, gang saw flywheel assembly, tight pulley and free-running pulley with bushing and many more parts Lhjdpfx Ajwhv Rnob Usn

Condition: new, Year of construction: 2025, functionality: fully functional, power: 55 kW (74.78 HP), • 160 mm cutting height • 600 mm cutting width • 70 mm saw shaft • 1 set of spacer rings according to customer requirements • 5–30 m/min infinitely variable feed Ledpfx Aexqd Nnob Uohn • 2.2 kW feed motor • 4 driven lower rollers • 2 upper driven rollers • 3200 kg weight • 55 kW saw motor • Complete electrical system, with control cabinet and control panel • CE-compliant design • Machine painted in RAL 6011 • Protective devices painted in RAL 7032

Condition: good (used), Year of construction: 1996, CUTTING RANGE ..... MIN 10MM TO 75MM CUTTING LENGTH ..... 5-900 SINGLE STROKE -9999 REVERSE RUN Lhjdpfjquuufex Ab Uon CUTTING SPEED ..... 0 - 40 MM SEC. INFINITELY VARIABLE REVERSE 135MM/S MATERIAL FEED SPEED ..... MAX. 350 MM/S TENSION FORCE ..... MAIN CLAMP 10500N

Year of construction: 2012, condition: excellent (used), Double-head saw with 3 controlled axes for aluminium, PVC, and light alloys, featuring automatic movement of the mobile head and electronic management of all angles from 45° (internal) to 15° (external), with precision up to 280 positions per degree. Lodpfsxqdu Djx Ab Uehn

Condition: used, Year of construction: 2025, PROMOTIONAL PRICE! A professional, very powerful and efficient band saw for metal with an arm swivelling up to 45°. Perfect solution for carpentry, production and craft facilities. Its design and solid construction make it stand out from other machines. Product features This universal machine enables cutting in vertical plane and in the plane perpendicular to the axis of the cut material, or at any angle in 45°–90° range. Element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Required band linear velocity is obtained by changing the ratio on the belt pulley between the worm gear and the driving motor. Suitable speed of arm lowering is obtained thanks to the valve controlling oil flow between the hydraulic cylinder chambers. Arm made of shaped spheroidal cast iron secures rigidity during operation and absorbs all vibrations. Control panel is situated close by the worm gear. Cutting band transmission system is composed of two cast iron wheels. The first wheel is a tensioning wheel (adjusted with a lever) and the second one is a drive wheel. Torque from the worm gear is directly transmitted to the tensioning wheel, while the worm gear is driven by an electric motor. Appropriate band angle is ensured through a set of roller bearings. The base of the machine is a rigid cuboid made of steel sheets inside which is a cooling fluid container with a flood coolant pump. Tank for flood coolant draining and a container for chips are fixed to the upper part of the machine. Cast iron workbench is attached to the tank, which in turn is equipped with a vice for material clamping and to which the arm of the band saw is fixed. In the lower part of the machine base are holes for wheel axles. Safety during cutting process is ensured by an electric installation meeting all CE requirements. The machine is equipped with a limiting switch that stops the machine after cutting process is finished, an emergency button, a number of microswitches that switch the machine off when, e.g., the belt transmission guard or cutting band guard are opened. Additionally, our machine, as opposed to competitors, is equipped with a wire brush for band cleaning – it prevents the blade from blocking and ensures a more effective cutting. NEW Arm construction allows for changing the machine from horizontal into vertical with workbench in just a moment. This is not only useful for metal cutting but also as a jigsaw machine for carpentry. Technical data Cutting band size 2360×20×0.9 mm Band tension mechanical (manual) Band speeds 34, 41, 59, 98 m/min Feed speed 0-50 m/min (stepless feed) Arm lowering control stepless - hydraulic cylinder Vice base height 600 mm Power supply 230V Main motor power (kW) S1 100%: 0,75; S6 40%: 1.1 kW Weight 190 kg Dimensions 1250×700×1000 mm Warranty 12/24 months User manual yes CE Declaration yes Lsdpfx Ajxqd T Teb Ushn Angle 0° 180 mm 180×210 mm 180×180 mm 45° 130 mm 140×90 mm 130×130 mm WARNING!!! THE MACHINE IS RETURNED, SERVICED, NO ORIGINAL PACKAGING.

Condition: ready for operation (used), Year of construction: 1983, Available immediately ex-location: Behringer Bandsaw Automatic HBP 400 A Year of manufacture 1983, retrofit in 2016, new electrics, touch panel, upgraded to the latest safety standard Lhodpfjxqbn Iox Ab Uon (EUR 16,250) Cutting diameter round / flat: 400 mm Cutting speed: 19 – 130 m/min Drive power: 5.5 kW Minimum cut-off length: 10 mm Automatic feed: 19 – 610 mm Multiple feed: 10 – 9999 mm Weight: 3 t Complete roller conveyors At a price of EUR 3,750 plus VAT, ex location Hamburg

Condition: excellent (used), suitable e.g. for ESTERER SS 56, 1,320 mm long x 140 mm wide x 2.2 mm thick, tooth pitch 22 mm, serrated facing 30 x 8 mm for JANSEN-Angel type no. 7 Lhjdpfx Aolu Dzxjb Usn

Condition: refurbished (used), 2 pieces 125 mm Ø x 170 mm Ø x 173 mm long 1 piece 140 mm Ø x 190 mm Ø x 173 mm long Lhedpfjngz N Iox Ab Usn