Used Edge Grinding Machine for sale (92,659)

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Edge Control control system with 18.5" touchscreen color monitor 16:9 Swiveling operator panel, Program storage, Motorized pressure bar adjustment, Feed via transport chain, Feed speed: 8-18 m/min Extendable workpiece support, Infeed fence with motorized adjustment Jointing unit 1961, Diamond jointing cutter for climb and counter rotation, Automatic adjustment to workpiece height Edge feed 1903 Pre-trimming up to 3 x 45 mm (depending on material) Glue application system 1905 Multi-System Automatic glue height adjustment with sensor nozzle, Pressure regulator for adjusting the cartridge contact pressure, Use of PUR adhesives possible, Pressure unit 1913 MOT, First roller driven End trimming unit 1918 with pneumatic adjustment End trim saw pneumatically swiveling, Multifunction unit 1824 MOT 4 with multifunction cutter radii 1,2,3 mm Corner copying unit 1832 Corner copying up to 3 mm edge thickness Radius scraper 1929 MOT 2 Tjdsv Sv Enopfx Ab Dod With motorized adjustment of horizontal tracing rollers With pneumatic adjustment (top and bottom separate) Chip collection box for radius scraper, Surfacing scraper 1964 For removing glue residue for a clean glue line With extraction hoods Spray unit 1856 for infeed and outfeed area Buffing unit 1940 For finishing and edge polishing ----- Technical Data ----- Edge thickness roll material: 3 mm, Edge thickness strip material: 8 mm, Max edge thickness for corner copying: 3 mm, Workpiece thickness: 45 mm, Workpiece thickness for corner copying: 45 mm, Min. workpiece length: 180 mm, Feed speed: 8-18 m/min, Distance workpiece support: 470 mm, Support table diameter for edge material: 800 mm, End cut knife for coiled material up to: 3 mm, Heating time: 3.5 min, Jointing unit power: 2 x 2 kW, End trim saw power: 2 x 0.22 kW, Milling station power: 2 x 0.35 kW, Corner copying power: 0.22 kW, Extraction port jointing unit: 120 mm, Extraction port milling unit: 70 mm, Extraction port scraper unit: 70 mm, Total length: 5,350 mm, Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Picture of operating hours taken from a recording in 2022 Availability: short term Location: Röllbach

Year of construction: 2001, condition: ready for operation (used), Main Drive Number of axis 4 This 4-axis BLOHM Profimat MT 408 grinding machine was manufactured in 2001. It features a robust grinding spindle motor, PEA table, and efficient drives for the X-axis, Z-axis, and Y-axis. Grinding wheels are included, enhancing its readiness for immediate use. Consider the opportunity to buy this BLOHM Profimat MT 408 grinding machine. Contact us for more information about this machine. Tedpfsxrhfcjx Ab Djd Application Types Grinding

Condition: used, Double Bench Grinder AEG Type DWS 200/800M No: 87 644919 Year of manufacture: approx. 1970 Todpsxrgvaofx Ab Dsd Grinding wheel diameter: 200 mm Grinding wheel width: 32 mm Motor power: 0.8 kW Grinding wheel speed: 3000 rpm Power supply: 380 V, 50 Hz - Motor bearings need to be replaced - 1 grinding wheel with 25 mm width - 1 grinding wheel with 32 mm width Required space (L x W x H): 600 x 280 x 300 mm Weight: 40 kg

Condition: used, dia. of draw-in collets 4 - 24 mm max. radius to grind 12 mm grinding range 4 - 24 mm grinding wheel-diameter 100 mm total power requirement 0,4 kW weight of the machine ca. 100 kg dimensions of the machine ca. 1 x 0,6 x 0,4 m Machine has 19 clamping devices 4-14 mm, 12 pieces of grinding wheels 100 mm, puller for grinding wheel. Tsdpjv Dxzpofx Ab Ded Machine dealer with own stock of 1600 m².

Condition: ready for operation (used), Year of construction: 2000, operating hours: 1,234 h, functionality: fully functional, grinding length: 600 mm, grinding width: 350 mm, Surface grinding machine by Geibel & Hotz - FS 635 SA - Year of manufacture: 2000 - Equipped with a PLC control - Grinding area: 600 x 350 mm - Magnetic area: 600 x 350 mm Tsdpfxjxrgi Te Ab Ded The machine is still in operation and can be made available at short notice by arrangement. Inspection is possible at any time. Collection by the buyer (assistance with loading is possible – forklift available).

Condition: ready for operation (used), Year of construction: 1982, Sanding length 500 mm Sanding width 350 mm Sanding height 375 mm Sanding spindle drive 3.7 kW Table speed 2-28 m/min Automatic cross feed 1-60 mm/stroke Tsdpeu Ag Aiefx Ab Djd Automatic vertical feed 0.002 - 0.06 mm/min Grinding wheel dimensions 300 x 76.2 x 50 mm Machine weight approx. 2,800 kg

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for up to 100 mm edge height! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: Tedpfx Aswka S Ieb Dod - Machine table with 13 running rollers for improved workpiece guidance - Edge feeding, synchronous with belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber top - Digital counter for height adjustment - Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill - Flush cutting unit: - for front and rear workpiece edges - automatic sensing at the workpiece - pneumatic cutting with knife for cuttable edges - Flush trimming unit - with vertical sensing and horizontal guidance - reproducible setting using digital counters - 2 powerful 0.4 kW high-frequency motors - stepless speed adjustment from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction nozzle Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with belt feed - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable foil dispenser Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 Bar Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Condition: new, Year of construction: 2025, Pre-milling unit: yes Pre-milling unit material removal: 0 - 2 mm Tedpel D Rx Usfx Ab Dod plastic edges: 0,4 - 3 mm solid wood edges: 0,5 - 5 mm Workpiece thickness: 8 - 50 mm Minimum length of workpiece: 120 mm Min. work piece width: 110 mm Anti-adhesive spraying unit: yes Edge preheating device: yes / with ceramic infrared lamp Bonding unit: granulat / Glue container quick-change kit Jack knife: yes Flush trimming unit: yes Corner copy unit: yes Flush radius milling unit: yes Radius scraper unit: yes Area scraper unit: yes Buffing unit: yes Cleaning spray unit: yes motor power: 5 kW machine length: 3774mm machine width: 1546 mm machine height: 1337mm weight: 842 kg

Condition: used, Double grinding machine METABO Type 730 Serial No. 208158 Grinding wheel diameter: 200 mm Grinding wheel width: 33 mm Motor power: 0.75 kW Grinding wheel speed: 2800 rpm Power supply: 380 Volt, 50 Hz - Original stand Tsdpfx Abjxrguis Djd Required space (L x W x H): 630 x 340 x 1150 mm Weight: approx. 80 kg

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 81300 € 1536.57 € 1015 mm 600 mm Tedpfx Abswircie Dod 1000 x 400 mm 1000 x 400 mm 670 kg 1100 mm 5 - 25 m/min 0 - 2.250 mm/min mm 450 mm 440 mm 0 - 675 mm/min 0.001 - 0.04 mm 500 - 2.000 1/min 5,5 kW 1.5 kW 1.1 kW 1.1 kW 3630 mm 2682 mm 2200 mm 4400 x 2300 x 2400 mm 4800 kg 423 kg 670 kg 355 x 50 x 127 mm 10,4" grafic NC-control on swiveling arm with touch screen for: - seletion of working mode, program creation, graphic condition control, alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator oil mist collector autom. dressing attachment table mounted with compensation fully enclosed splash guard protection of working area grinding wheel grinding wheel flange grinding wheel balancing stand (roller type) balance arbor LED machine lamp machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH

Condition: good (used), Year of construction: 1968, Cylindrical grinding machine, manufacturer: STANKOIMPORT, type: XC3, year 1968, with accessories. Model: 3A 161. Centre height: 161 mm, grinding diameter: 322 mm. Centre distance/grinding length: 1000 mm. In good condition. Todsxq Tlrepfx Ab Dod

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, total length: 10,083 mm, total width: 1,443 mm, total height: 2,363 mm, overall weight: 3,400 kg, input current: 32 A, working height: 900 mm, power: 23.5 kW (31.95 HP), Neptun Rock 11 - Year: 2012 - Condition: Refurbished - Glass thickness: 3-40 mm - Weight: 3,400 kg - Speed: 0.5–5 m/min - Power: 23.5 kW Tjdpsxtutpjfx Ab Ded - Current: 32 Amps - Air pressure: 7 Bar - Maximum load per linear meter: 250 kg - Number of diamond wheels for straight edges: 3 - Number of polishing wheels for straight edges: 4 - Number of diamond wheels for arris: 2 - Number of polishing wheels for arris: 2

Condition: used, Year of construction: 2001, x-axis 1000 mm y-axis 500 mm z-axis 425 mm Tjdsww Nf Dopfx Ab Ded table size 1000x500 ja weight 4200 kg

Condition: new, Year of construction: 2025, Gluing unit: Yes Edge thickness: maximum 3 mm Workpiece thickness: 8 mm - 50 mm Workpiece width: min. 110 mm Todpfx Abexrbibo Dsd Glue pot: granulate, quick-change pot End trimming shears: yes End trimming / flush cutting: yes Milling station: chamfer / radius Flat scraper blade: yes Radius scraper blade: yes Infeed fence adjustment: manual Workpiece thickness adjustment: manual Power consumption: 5 kW Machine length: 3314 mm Machine width: 1085 mm Weight: 623 kg

Condition: used, Double grinding pedestal AEG type DWS DWS 301/1100 Tsdpjxrgtxefx Ab Dsd No: 87 154303 Year of manufacture: approx. 1970 Grinding wheel diameter: max. 300 mm Grinding wheel width: max. 40 mm Motor power: 1.1 kW Grinding wheel speed: 1500 rpm Power connection: 380 Volt, 50 Hz - Fitted grinding wheels Ø 260 mm - Motor newly fitted with bearings Required space (L x W x H): 650 x 450 x 370 mm Weight: 64 kg Good condition

Condition: used, Year of construction: 1990, 1000 x 600 mm magnetic plate size 1000 x 600 mm grinding height max 400 mm Tjdpsvanvuofx Ab Ded grinding wheel width x diameter 400 x 60 x 127 mm dimensions 3900 x 20 50 x 2400 m ja weight of the machine ca. 6 t

Condition: used, Year of construction: 1954, x-travel 600 mm ja Todpfx Abevu Hl Do Djd

Condition: used, Year of construction: 1987, 300 - 1400 weight 5 t cooling ja Tjdpfx Abewhqzbo Djd

Condition: used, Year of construction: 1954, grinding length 600 mm grinding width 205 mm Tedovu Hkyepfx Ab Djd x-travel 600 mm ja

Condition: used, Year of construction: 1999, magnetic clamping plate 1400 - 700 mm Tsdpfx Aovu Hlqeb Djd weight of the machine ca. 6 t

Condition: used, Year of construction: 2007, oil mist extraction ja serial number 2342-11 Tjdpfx Ajwgi Rfsb Dsd

Condition: used, Year of construction: 2000, grinding length 600 mm grinding width 300 mm magnetic clamping plate 600x200 mm wheel diameter 220-300 mm machine weight ab. 2200 kg serial number 245 Tsdpfx Absw Syizo Dsd

Condition: used, Year of construction: 1970, Year ca. 1970 magnetic plate size 520 x 200 mm weight of the machine ca. 1,4 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++ Tedpfx Absirazpe Dsd

Condition: used, Year of construction: 1975, max. bore diameter to be ground 6 bis 100 mm stroke - stepless adjustable 550 mm grinding depth ca. 250 mm workpiece weight 150 kg total power requirement 15 kW weight of the machine ca. 4.300 kg Todpfxjucgwko Ab Ded dimensions of the machine ca. 2,7 x2,4 x 2,2 m

Condition: used, Year of construction: 1991, working area 225 mm table-size L:550 mm table-size B:200 mm sanding disc diameter 200mm mm magnetic plate size 500 mm Tsdpfeud Algox Ab Djd weight of the machine ca. 1,8 t dimensions of the machine ca. 2000x1600x2100 m