Used Eddy Current for sale (5,673)

Condition: used, Technical details: grinding wheel diameter: 200 mm voltage: 220 380 V / Hz revolution per minute: 3000 U/min total power requirement: 900 Watt weight: 22 kg dimensions L x W x H: 0,23 x 0,46 x 0,25 m Double sanding block; table-top unit Bodju Ngu Sopfx Albswn with sanding supports left/right, horizontally adjustable 30mm max. sanding discs Ø 200mm max. grinding wheel thickness 32mm currently clamped sanding discs on the sanding block: left = Ø 190mm x 30mm type H50 and right = Ø 180mm x 32mm type M20 *

Condition: used, Year of construction: 1977, Technical details: grinding wheel diameter: 200 mm revolution per minute: 3000 U/min with handrail: verschiebbar 30mm current type: 220V / 380V total power requirement: 900 Watt Bwsdpfxou Nguxo Alben weight: 149 kg dimensions L x W x H: 0,4 x 0,5 x 1,2 m Double grinding block Main switch - On/off switch Connection for dust extraction Currently attached grinding wheels: Ø 140 x 25 and Ø 150 x 25 mm *

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Bwodpsu Tg I Dofx Albjn Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, year of last overhaul: 2025, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Bsdpfx Ajvf E Avolbjwn Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: ready for operation (used), Year of construction: 2003, operating hours: 124,706 h, spindle speed (max.): 6,300 rpm, travel distance X-axis: 370 mm, travel distance Z-axis: 250 mm, spindle motor power: 10,700 W, controller manufacturer: TRAUB, controller model: TX8i (64-bit), number of axes: 6, This 6-axis TRAUB TNK 36 was manufactured in 2003. It features a maximum spindle speed of 6,300 rpm and a main spindle bore of 36 mm. The machine is equipped with advanced capabilities such as tool monitoring, rigid tapping, and a high-pressure coolant system. If you are looking to get high-quality turning capabilities, consider the TRAUB TNK 36 horizontal turning machine we have for sale. Contact us for further details. TECHNICAL DATA • MDE Interface: Yes • Tool Monitoring: Yes • Rigid Tapping: Yes (without compensation chuck) • Main Spindle Bore: 36 mm • Main Spindle Drive Power: AC 6.7 / 10.7 kW • Top Turret Stroke X/Z: 50 / 100 mm • Rear Attachment Stroke X: 73 mm • Rear Attachment Stroke Y: ±50 mm • Main Spindle C-Axis: Yes • Hainbuch Change Parts: Yes • Hainbuch Setup Aid Base Body: Yes • Hainbuch Manual Change Device: Yes • Counter Spindle: Motor Spindle • Counter Spindle C-Axis: Yes • Counter Clamping Pressure Device: Yes • Workpiece Ejection Device: Yes • Hainbuch Axfix Chuck: Yes • Upper Tool Carrier: Yes • Electronic Gearbox: Yes • X3 Cross Axis for Front Unit: Yes • Front Unit: 5-position • Driven Tools on Front Unit: Yes • Cut-Off Side Machining Station: Yes • Driven Tools on Cut-Off Side Station: Yes • Workpiece Unloading Device: Gripper • Coolant Tank Capacity: 230 l • Coolant Pressure: 7 bar • Coolant Flow Rate: 50 l/min • Internal Coolant Supply: 30 bar • High Pressure Coolant: 120 bar (front and rear machining station) • Coolant Filter: Knoll VRF 150/750 Vacuum Rotary Filter • Suitable Materials for Filter: Aluminum, Plastic, Brass, Steel • Wash Gun: Yes • Connected Load: 22 kW • Maximum Bar Length: 3 m • Maximum Bar Diameter: 36 mm • Operating Voltage: 400 V, 3~, 50 Hz • Control Voltage: 24 V AC • Valve Voltage: 24 V DC • Clutch Voltage: 24 V DC • Total Installed Power: 33 kW • Total Rated Current: 60 A ADDITIONAL EQUIPMENT OPTIONAL • FMB turbo 5-42 XT / 3200"C" Bar Feeder • Bar Feeder Year: 2003 Bedpeza Ucxefx Albown • Hinged Belt Chip Conveyor • Chip Conveyor Discharge Height: 950 mm • Guide Tubes D25, D36 • Running Workpiece Stop, Shank 16 × 16 mm • Brankamp CMS 100 Collision Monitoring Technical Specification Through-spindle Coolant Yes Counter Spindle Yes Driven Tools Yes

Condition: as good as new (ex-display), Submersible Waste Water Pump, Drainage Pump, KSB Ama-Drainer A 405 SD/10, New/Unused Machine in Box Bedpfx Aeza Td Ielbswn Manufacturer: KSB Aktiengesellschaft (Frankenthal, Germany) Type: AMA-DRAINER A 405 SD/10 S-H Overall dimensions : 290 x 290 x 520 mm Design: Submersible drainage/waste water pump with stainless steel housing Power output: 0.76 kW Rated current: 1.70 A Voltage / Frequency: 380–415 V 3~ (Three-phase) • 50 Hz Flow rate (Q): 2–21 m³/h Delivery head (H): 9.3–3 m Max. liquid temperature: T40°C Insulation class: Classe F Enclosure class: IP 68 (Max. immersion depth: 10 m) Standard: EN12050-2 Country of origin: Germany Designed for long service life under continuous operation. Suitable for drainage, wastewater handling, and emptying pits or tanks. Comes in its original factory packaging with cable.

Condition: ready for operation (used), Year of construction: 2022, operating hours: 215 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 510 mm, spindle motor power: 22,000 W, number of axes: 4, This 4-axis Okuma LB 3000 EXII was manufactured in 2022. It features a spindle speed of 5,000 rpm and a bar capacity of 52 mm. The machine includes a 12-position motorized turret and a Y-axis travel of 120 mm. If you are looking to get high-quality turning capabilities, consider the Okuma LB 3000 EXII horizontal turning machine we have for sale. Contact us for further details. - Control: OSP-P300LA- Spindle Speed: 5,000 rpm- Spindle Power: 22 kW- Spindle Nose: ASA 6" (80 mm bore, without drawbar)- Bar Capacity: 52 mm (Kitagawa SR1453 cylinder)- Spindle Orientation: Electric- Y-Axis Travel: 120 mm- C-Axis Rotation: 360° (0.001° increments)- Turret: 12-position radial, motorized- Turret Motor Speed: 6,000 rpm- Turret Motor Power: 7.1 kW- Tailstock: CM5 (500 kgf thrust, rotating center)- Tool Holders: Eppinger live/static tool holders- High-Pressure Coolant Pump: 0.8 kW, 6 bar, 20 l/min- Tool Presetting: Manual- Programming: Plain text dialog IGF- Chip Conveyor: Enomoto hinged belt type chip conveyor with external control box- Voltage: 400 V- Number of Phases: 3 P- Frequency: 50 Hz- Max Power Consumption: 33.1 kVA- Total Current Consumption: 47.8 A- Max Motor Current: 154 A- Control Cabinet Short Circuit Strength: 2.5 kA- Machine is a Showroom machine Bwedpfx Aeza E H Uelbsn Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), Weiss WT-1300/70/15 Temperature Test Chamber Manufacturer: Weiss Umwelttechnik GmbH Type: WT-1300/70/15 Water-cooled temperature test chamber with touch panel control for temperature tests in research, development, quality assurance, and industry. Technical Data Temperature range: -70 °C to +180 °C Test chamber volume: approx. 1340 liters Temperature change rate (heating): 15 K/min Temperature change rate (cooling): 10 K/min Temperature deviation (time-based): ± 0.1 to ± 0.5 K Temperature homogeneity (spatial): ± 0.5 to ± 2 K Test chamber dimensions: Height: 920 mm Width: 1100 mm Depth: 1330 mm External dimensions: Height: approx. 2050 mm Width: approx. 1300 mm Depth: approx. 3200 mm Permissible test specimen load: Test chamber floor: 150 kg Insert grid: 50 kg Electrical Data Rated voltage: 3/N/PE AC 400 V ±10 % 50 Hz Rated current: 63 A Rated power: 44 kW Refrigeration System Refrigerant R404A: 14.0 kg Refrigerant R23: 5.4 kg R404A LP max.: 18 bar R404A HP max.: 25 bar R23 LP max.: 19 bar R23 HP max.: 25 bar Standby pressure: 18.5 bar Equipment Touch panel control Stainless steel test chamber Multiple insertion levels Side access port Bjdpjza Dv Ijfx Albswn Heated door seal Water-cooled refrigeration unit CEE connector CE marking Weight: approx. 1500 kg Condition Used unit from industrial application. Optical condition as shown in the pictures. For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Scope of supply: see pictures Inspection possible by arrangement. Loading can be organized. Subject to changes and errors in the technical data.

Condition: like new (used), Year of construction: 2022, Modern and fully functional injection molding machine Krauss Maffei precision Molding 160-750, year of manufacture 2022. This machine is one of the top-of-the-line equipment for industrial plastic injection molding, designed for precise, reliable and efficient series production. Thanks to its modern design, high performance and precise control system, it is suitable for the production of demanding plastic components for the automotive industry, electronics, consumer goods and industrial components. Technical parameters • Manufacturer: Krauss Maffei, Germany • Model: precisionMolding 160-750 • Year of manufacture: 2022 • Power supply: 400 V / 50 Hz / 3P + N + PE • Rated heating power: 4.8 kW • Motor power: 25.2 kW • Total socket power: 55.0 kW • Full load current: 143.3 A • Back-up fuse: 50 A • SCCR: 25 kA Machine characteristics and advantages • Precision and reliability: enables the production of high-precision parts with repeatable quality • Energy efficiency: optimized power and heating control minimizes energy consumption • Modern control system: intuitive control and precise adjustment of injection parameters • Production flexibility: suitable for various types of plastic parts, from small precision parts to larger components • Possibility of purchasing injection molds: allows for immediate expansion Bwsdoza A H Ejpfx Albsn of production capacity • Production process support: with If you are seriously interested, we can provide you with contact information for buyers of the manufactured parts Use of the machine The machine is suitable for a wide range of industrial uses: • Automotive industry – precision body parts, covers, technical components • Electronics – device covers, switches, connectors • Consumer goods – components for household appliances, toys, packaging • Industrial components – technical parts requiring high precision and reliability Condition and availability The machine is in fully functional condition, regularly serviced and ready for immediate use in production. Possibility of personal inspection by arrangement.

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 641/302, total width: 600 mm, total length: 800 mm, total height: 1,300 mm, overall weight: 120 kg, ECKOLD SK 2911/HAE 500/2 power former - Operating voltage: 380 V - Frequency: 50 Hz - Rated current: 30 A - Connection: 8.1 kW Bwodpfey Dcwyex Albjn Note: This item must be collected on a binding basis between July 7th and July 9th, 2026, on a date to be agreed upon. FCA D-71263 Weil der Stadt – loaded onto truck

Condition: good (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 117004, total length: 7,500 mm, total width: 1,200 mm, total height: 2,000 mm, overall weight: 2,500 kg, KALTENBACH SKL 400 H Cold Circular Sawing Machine (completely overhauled) - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 20 A - Saw blade: 400 x 4 x 50 mm - Saw blade mount: 50/4 x 14/80 mm - Working range, round material 90/45°: 130 mm - Square material 90°: 120 mm - Profiles 90°: 300 x 45 mm - Profiles horizontal 45°: 220 x 60 mm - Profiles vertical 45°: 80 x 120 mm Bsdpfx Aey Dcu Eolbswn - Saw motor: 3.7 / 4.5 kW - Cutting speed: 1750 / 3500 m/min - Saw blade feed: 0 - 3700 mm/min - Saw blade rapid return: 4500 mm/min Additional equipment: - Workpiece clamping with short stroke vise: stroke 8 mm - With hand crank for presetting - Machine overhauled and newly painted - Horizontal clamping cylinder front, each - Minimum quantity lubrication instead of coolant spray system - T3 feeder roller conveyor with rollers 60 x 289 mm - One starter section: 2000 mm, with 5 rollers, one support leg, one mounting angle - One extension section: 2000 mm, with 4 rollers, one support leg, one stop roller, adjustable as a guide for material bars - Length measuring device including T3 discharge roller conveyor Note: The item must be collected by binding appointment between 07 and 09 July 2026 (exact date to be agreed). FCA D-71263 Weil der Stadt – loaded onto truck

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 1324, spindle bore: 42 mm, total length: 2,000 mm, total width: 1,000 mm, total height: 1,800 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 22 rpm, overall weight: 1,500 kg, WEILER CONDOR B Lead and Feed Screw Lathe - Operating voltage: 380 V - Control voltage: 220 V - Connection: 3 kW - Rated current: 25 A - Frequency: 50 Hz - Centre distance: approx. 700 mm - Centre height over bed: 170 mm - Swing over bed: 340 mm - Centre height over cross slide: 100 mm - Swing over cross slide: 200 mm The machine is equipped with a tailstock, a Multifix tool holder, type B, as well as a 3-jaw chuck by RÖHM, diameter: 150 mm. Additionally, it features a digital readout by ELESTA, model: VISULESTA 4, including a matching workshop drawer cabinet with suitable accessories for the machine. Bwsdeyiztiepfx Albjn FCA D-73235 Weilheim Teck – loaded onto truck

Condition: excellent (used), Year of construction: 1998, machine/vehicle number: 2036, total height: 1,900 mm, total length: 1,400 mm, total width: 900 mm, overall weight: 600 kg, rotational speed (min.): 2,000 rpm, rotational speed (max.): 10,000 rpm, table length: 500 mm, table width: 200 mm, power: 2 kW (2.72 HP), Equipment: rotational speed infinitely variable, TECHNICAL DETAILS: - Machine number: 2036 - Operating voltage: 400 V - Frequency: 50–60 Hz - Rated current: 10 A - Connection: 2 kW - Grinding wheel diameter: max. 125 mm - Speed: 2,000–10,000 rpm - Table dimensions: 500 x 200 mm WORKING AREA & CAPACITY: - Indexing head center height: 170 mm - Tailstock center height: 120 mm (with intermediate support: 170 mm) - Workpiece diameter between centers: 338 mm - Workpiece diameter, overhung: 600 mm - Distance between centers: 950 mm - Internal taper, indexing spindle: Morse 4 / Unified 40 - T-slots, machine base: 12 mm - T-slots, additional elements: 8 mm TRAVEL DISTANCES & ADJUSTMENTS: - Sharpening stroke: 190 mm - Cross travel, tool holder: 100 mm - Vertical adjustment, grinding head: 325 mm - Axial adjustment, grinding spindle: 5 mm - Tool holder: 230 mm - Grinding head mounting: 800 mm - Indexing device on tool slide: 330 mm ROTATION / SWIVEL RANGES: - Grinding head mounting: 360° - Grinding heads: 360° - Tool holder: 360° - Universal device (horizontal/vertical): 360° OTHER FEATURES: - Spiral grinding/slotting lead: 0.80 mm - Maximum spiral sharpening length: 190 mm DRIVE & SPEEDS: - Three-phase motor: 0.7 / 0.85 kW - DC motor: 1.3 kW Bwjdpjwxrf Nofx Albsn - Spindle speeds: 4,000 / 8,000 rpm (pole switching) - Stepless DC: 2,000–10,000 rpm - Grinding wheel diameter: max. 125 mm - Cutter wheel diameter: max. 200 mm ACCESSORIES: - Includes two-axis digital readout - Extensive machine accessories included

Condition: used, Year of construction: 2020, Overview  This labelling machine was manufactured in 2020 by Gernep. The machine is designed for labelling applications in the juice industry. The machine is currently still installed and under power and can be visited on request. Technical data Capacity: 10,000 bph Application: Juice Configuration: Gernep Labetta 4/3/10 640 2A Labelling technology: Cold glue / Rollina Labelling stations: 2 × cold glue aggregates Bottle Formats Container type: Glass bottles (fruit juice) Typical formats: 1.0 L VDF (H=307 mm, Ø90 mm) 0.5 L NRW (H=260 mm, Ø68 mm) Special capability: Suitable for hot-fill applications Label Data 1st cold glue station: Label length: approx. 25 – 140 mm Label height: max. 150 mm Lower edge: max. 15 mm Upper edge: max. 320 mm 2nd cold glue station (incl. wrap capability): Label length: approx. 25 – 140 mm Up to 170° wrap-around of bottle circumference Label height: max. 150 mm Lower edge: max. 15 mm Upper edge: max. 220 mm Applications: Body label Front (chest) label Back label Bsdpfx Alozazkvebswn

Condition: ready for operation (used), Year of construction: 2002, operating hours: 22,542 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 570 mm, travel distance Y-axis: 206 mm, travel distance Z-axis: 635 mm, controller manufacturer: FANUC, controller model: Series 21i-T, number of axes: 3, This 3-axis Gildemeister CTX 400 Serie 2 was manufactured in 2002. It features a spindle speed of up to 5,000 rpm and a z-axis travel of 635 mm, along with an x-axis travel of 570 mm over the bed. The machine includes a 12-position turret and is equipped with a 3-jaw chuck, chip conveyor, and coolant system. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX 400 Serie 2 machine we have for sale. Contact us for further details. • X-axis travel: max. 570 mm (over bed) / 420 mm (over slide) • Voltage: 400 V • Frequency: 50 Hz • Power capacity: 44 kVA • Rated current: 64 A • Main fuse: 80 A • Control voltage: 230 V (AC) / 244 V (DC) • Spindle hours: 22,542 hours • Feed time: 8 hours 4 minutes • Turret: 12-position turret • Tooling capability: driven tools; C-axis displayed on screen Additional equipment • 3-jaw chuck • Chip conveyor • Coolant system • Workspace lighting • Optional: Tool Holder Package • Optional: Schunk Rota NCD 210-66 three-jaw chuck Technical Specification Counter Spindle No Driven Tools Yes Bwedpfx Aljzazlyebon

Condition: used, New diesel generator set, power generator, emergency generator RTE Model: 50 kVA – identical to DAEWOO DAGFS 50 Brand new, unused, year of manufacture 2025 Rated output: 50 kVA Continuous output: max. 40 kVA Standby output: 55 kVA / 44 kW Rated current: 33 A Voltage: 400/230 V, 50 Hz 230 V, 50 Hz Fuel consumption: 99-liter tank for up to 8.5 hours of operation at 75% load Fuel consumption at 75% load: approx. 11 liters/hour Fuel consumption in standby mode: approx. 4 liters/hour Bwedpfxoxlkq Uj Albjn Drive engine: 4-cylinder Ricardo ZH4105ZD inline diesel engine Engine power at 1500 rpm: 45 kW Engine power at 1800 rpm: 55 kW Displacement: 1500 cc Tank capacity: 99 liters - Simple and compact design with soundproof metal enclosure - Forklift pockets for easy and safe transportation - 3x CEE 16A sockets (3-pin, 230V) - 1x CEE 16A socket (5-pin, 400V) - Terminal connections for cable power supply for external consumers, e.g., site distribution boards - ATS module for mains backup operation, enables automatic emergency power switching in case of power failure Required space (L x W x H): 2150 x 950 x 1200 mm Weight: 900 kg New machine from stock

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 Equipment and technical specifications: Complete in standard configuration with: - Support with linear guide consisting of: 1 pc. single-spindle horizontal drilling unit, 0.65 kW motor, stroke 70 mm Tool speed selectable via operator software (3,000/5,000/8,000 rpm) 1 pc. blow-out, glue application, and dowel insertion station for dowels Ø 8 mm, dowel length 25-50 mm Bwjdpfx Asy Ih Skjlbsn - Fully automatic, electronically controlled central lubrication - X-axis NC-controlled, with working length 1,300 mm, feed speed max. 105 m/min - Z-axis adjustable manually via mechanical digital counter, position via support table 5-40 mm - Dowel insertion projection adjustable 7-20 mm via mechanical digital counter, drilling depth 0-35 mm (with drill length GL 70 mm) is automatically set in conjunction with insertion projection - Closed glue system with 6 bar glue pressure via glue nozzle, for adhesives with viscosity 150 to 350 mPas - Glue quantity infinitely adjustable via operator software - Selector switch GLUE/WATER for flushing the glue system, each with: 1 stainless steel container for 7.5 kg glue and 7.5 l water - Control lamp for glue level indication in the glue container - 1 pc. left side fence, 1 pc. right side fence, and 1 pc. center fence (all removable) - 4 pcs. start buttons for individual operation with 1-4 workpieces - 4 pcs. pneumatic angled clamping cylinders 10° for workpiece thickness up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm 1 pc. TCT control with: Integrated industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, 15" capacitive TFT industrial touchscreen display, operating system: WINDOWS 7 - Programming via menu-guided user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and process optimization, 4 work areas can be assigned with different programs, graphical workpiece representation, parametric programming, zero-point offset, programmable work lists, error diagnosis with plain text Options: 1 Electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle 1 Z-axis with NC-controlled dynamic positioning for height adjustment of the drilling and dowel insertion station (programmable from 5-40 mm) travel speed max. 30 mm/sec 1 Single-spindle vertical drilling unit from above, 0.65 kW, (3,000/5,000/8,000 rpm), position (Y) manually adjustable via mechanical digital counter from 5-40 mm, drilling depth (Z) max. 30 mm (with drill length GL 57 mm), workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (incl. drilling depth compensation, e.g., for Häfele Minifix) 4 Vertical-angled clamping cylinders 10° with holders, additional 1 Keyboard with holder Availability: by arrangement; currently being overhauled at Ganner factory Location: Austria

Condition: used, Year of construction: 2017, Overview  This filling monoblock was manufactured in 2017 by CIMEC. The machine is designed for filling applications in the liquor and spirits industry. The machine is currently still installed and can be visited on request. Technical data  Capacity: approx. 3,000 bottles per hour Application: Filling (liquor / spirits) Configuration: Model MONDIAL MONOBLOCK LD 9/8 Filling System: Gravity filling Number of Filling Valves: 8 Number of Rinsing Nozzles: 9 Number of Labelling Heads: 1 Sealing: It applies heat shrink capsules on the neck Water Pressure (Rinsing): 2 – 3 bar CIP Cleaning Temperature: up to 80°C (water) / 100°C (steam at low pressure) Electrical Supply: 400V, 50Hz, 3-phase Components & Features: Rinsing & Filling Section: 9-head bottle rinser with “No Bottle / No Spray” system 8-valve gravity filler with adjustable filling level Electrical regulation of filling height and level Support system for heavy bottles Automatic tank level control via sensors Compatible with multiple bottle neck formats (including change parts) Labeling & Sealing Unit: Self-adhesive labeler (1 head) Optical label centering system for precise application Capability to apply label and back label on the same bottle Automatic capsule dispenser with thermal sealing head Guides and supports for multiple cylindrical bottle formats Control & Operation: Touchscreen interface with electronic control Adjustable production speed (manual and automatic modes) Entry and exit bottle sensors Integrated safety systems with automatic stop functions CIP (Cleaning in Place) function for internal cleaning and sanitation Bodpfxozaw Rrs Albewn

Condition: used, Year of construction: 2017, Overview  This labelling machine was manufactured in 2017 by NCM Maquinaria. The machine is designed for labelling applications in the wine industry. The machine is currently still installed and can be visited on request. Technical data  Capacity: 1,500 – 2,000 bph Application: Wine Configuration: Model LV+5 Type: Self-Adhesive Compatible Bottle formats: 250 ml – 500 ml – 750 ml 1 L - 1.5 L Nº of Heads: 4 Label Types: Front, back, neck and fiscal stamp labels Bwedpfszaw Rlex Albjn

Condition: good (used), GEA EasyFryer 4500/600 electrically heated fryer. 4.5m frying length, 600mm wide. High power 305 Kw model. Has come direct from ready meals factory where it was frying meal components. In lovely condition. CURRENTLY IN FINLAND, BEING LOADED MID JUNE 2026 Bodpfsvutgzjx Albewn

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Handover: in its current condition as inspected -Condition: see pictures -Clamping angle: for workpiece clamping -Table surface: 730x610 mm, height 1595 mm -Wall thickness: 35/42 mm -Oblong hole: 25x150/25x105 mm -Dimensions: see photos -Number: 4x mounting brackets available Price: per piece -Dimensions: 610/730/H1595 mm/piece -Weight: 658 kg/piece Bsdpfjzav Hrox Albswn

Condition: used, Year of construction: 2013, total height: 2,240 mm, total length: 5,240 mm, total width: 2,500 mm, Empty weight: 2.700 kg - Year: 2013 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: AA1/017355 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 3 - - Max. spindle speed [rpm]: 24000 - - Main motor power [kW]: 9.5 - Type milling table: Beam table - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 12 - Saw unit present: Yes - Working range X [mm]: 3050 - Working range Y [mm]: 1250 - Z-axis working range [mm]: 1810 - Y-axis maximum stroke [mm]: 1550 - Voltage [V]: 400 - Current consumption [A]: 31 - Transport dimensions: 5240mm x 2500mm x 2244mm (l x w x h) - Transport weight [kg]: 2700kg - Transport packages [pcs.]: 1 Bsdpfxswnii Ro Albswn Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2012, total height: 2,000 mm, total length: 4,500 mm, total width: 2,350 mm, Empty weight: 1.530 kg - Details: - └ Description: Including dust extraction - Year: 2012 - Documentation available: Yes - └ Type Documentation: Electrical diagrams, Parts book, Technical data, User manual - └ Language: NL - └ Type: Hardcopy - CE marking present: Yes - CE certificate present: Yes - Serial number: 18966 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 3 - - Main motor power [kW]: 11 - Type milling table: Flat table - Tool changer positions [pcs.]: 12 - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Busch Bsdpsyz Ad Isfx Albewn - └ Type: MM 1322 A VM8 - └ Year of manufacture: 2012 - └ Main motor power [kW]: 6 - └ Capacity [m³/h]: 360 - └ Connection diameter [mm]: 70 - └ Vacuum pressure [bar]: 300 - Table length [mm]: 3100 - Table width [mm]: 1500 - Working range X [mm]: 3309 - Working range Y [mm]: 1703 - Z-axis working range [mm]: 120 - Current consumption [A]: 24 - Power [kW]: 14.2 - Transport dimensions: 4500mm x 2350mm x 2000mm (l x w x h) - Transport weight [kg]: 1530kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2015, total height: 1,850 mm, total length: 2,300 mm, total width: 1,950 mm, Colour: White Empty weight: 1.240 kg - Year: 2015 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AB/222595 - Main motor power [kW]: 2.2 - Number of controlled axes [pcs]: 12 - Working range X [mm]: 3050 - Working range Y [mm]: 800 - Working range Z [mm]: 60 - X-axis max stroke [mm]: 1040 - Y-axis max stroke [mm]: 1030 - Z-axis max stroke [mm]: 100 - Number of milling spindles [pcs]: 8 - Spindle diameter [mm]: 10 - Min. spindle speed [rpm]: 1000 - Max. spindle speed [rpm]: 4000 - Horizontal drilling unit: Yes - Horizontal drilling spindles [pcs]: 6 - Max. drilling depth [mm]: 18 - Vertical drilling unit: Yes Bjdpfx Aszavvgjlbjwn - Vertical drilling spindles [pcs]: 8 - Max. drilling depth [mm]: 30 - Saw unit present: Yes - Voltage [V]: 400 - Current consumption [A]: 10 - Transport dimensions: 2300mm x 1950mm x 1850mm (l x w x h) - Transport weight [kg]: 1240kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2018, total width: 1,800 mm, total height: 2,200 mm, total length: 1,900 mm, Colour: Grey Empty weight: 1.500 kg Wide belt sander Boere Sandrite 1100C 380V Maximum sanding width 1100mm Maximum sanding height 150mm Bodpfx Aeyz U Dmslbown Sanding unit COMBI Engine 11kW (15HP) Transport dimensions:1800x1300x2100mm (LxWxH), Weight 1850kg - Year: 2018 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 18.03.7507 - Number of units [pcs]: 1 - └ Unit 1: - - Sanding belt length [mm]: 1900 - - Sanding belt width [mm]: 1100 - - Roller diameter [mm]: 150 - - Motor power [kW]: 15 - Max. working width [mm]: 1100 - Min. working height [mm]: 3 - Max. working height [mm]: 152 - Feed motor [kW]: 0.55 - Min. feed speed [m/min]: 2.5 - Max. feed speed [m/min]: 8 - Voltage [V]: 400 - Current consumption [A]: 28 - Fuse [A]: 32 - Power [kW]: 15.6 - Transport dimensions: 1900mm x 1800mm x 2200mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels