Used Eddy Current for sale (7,037)

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, table load: 900 kg, overall weight: 6,700 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 15,500 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Bridgeport VMC1000 XP3 was manufactured in 2005. It features an X-axis travel of 1020 mm, Y-axis travel of 610 mm, and Z-axis travel of 610 mm. The machine includes a worktable with dimensions of 1200 × 600 mm and a maximum table load of 900 kg. If you are looking to get high-quality machining capabilities, consider the Bridgeport VMC1000 XP3 vertical machining centre we have for sale. Contact us for further details. • Worktable dimensions: 1200 × 600 mm • Rapid traverse: X 43 m/min, Y 43 m/min, Z 36 m/min Dkods Agvnrspfx Aiisw • Electrical: 415 V, 50 Hz, Full load current 58 A, Short-circuit rating 25 kA Additional equipment • Chip conveyor with auger discharge chute Technical Specification Taper Size BT 40

Condition: good (used), Year of construction: 2006, functionality: fully functional, Stationary dust extraction unit Manufacturer: TEKA Model: Deltar Operating hours: 2234 Airflow rate: 5000 m³/h Max. static pressure: 3000 Pa Rated current: 8.5 A Dsdj Ahnaqspfx Aiiskw Frequency: 50 Hz Control voltage: 24 V Connection voltage: 400 V Protection class: IP 54 Power supply: 3-phase + N + PE Weight: 350 kg Motor power: 4 kW

Condition: used, functionality: fully functional, machine/vehicle number: 36518, mileage: 44,900 km, power: 175 kW (237.93 HP), first registration: 02/2023, overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 4x2, fuel: diesel, wheelbase: 3,560 mm, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel-air, loading space volume: 7 m³, Equipment: ABS, air conditioning, airbag, central locking, cruise control, differential lock, electronic stability program (ESP), immobilizer system, traction control, truck registration, The mileage of the offered vehicles may vary as some vehicles are currently in rental use! Additional similar vehicles available upon request. Right-hand drive, 6-cylinder OM 936 engine, ABS, ASR, ESP, disc brakes, engine brake, reinforced frame, front axle 5.3 t, rear axle 11 t, air suspension with differential lock, lane assist, Active Brake Assist, hill start assist, underrun protection, reversing warning tone, daytime running lights, rain sensor, light sensor, plastic toolbox, tank capacity: 125 l, AdBlue 8l. Dkjdpfxsy Rnk Se Aiijw Cab with 2 seats: driver comfort seat, fixed passenger seat, roof hatch, air conditioning, pollen filter, electric windows, electrically adjustable and heated mirrors, radio-CD with Bluetooth, speed limiter, central locking with remote, immobilizer with transponder, cruise control, digital tachograph, sun visor, reversing camera. Hydraulically driven turbine, steplessly adjustable, tank made entirely of stainless steel, additional manual pump for lifting the container, weight display, operating hours counter, sweeping hours counter and water indicator (remaining volume 300 l), automatic water supply cut-off when lifting the sweeping units and when reverse gear is engaged, acoustic signal in the cab when container is raised, 2 LED beacons + 2 LED work lights, sound insulation in equipment compartment, left/right sweeper unit, dual-sided intake, dual sweeping system, sweeping working width: 2300 mm / with dual sweeping system: 3940 mm, trailing disc brushes with steel bristles, diameter 700 mm, adjustable disc brush tilt (joystick right and left), roller brush with mixed polypropylene and steel wire bristles L=1500 mm, diameter 400 mm, disc brush spray nozzles, continuous front spray bar with 6 nozzles, 3 nozzles per disc brush, 6 nozzles in suction mouth, 5 nozzles on sweeping roller, wild weed brush type 'C' mounted on right, water system for cleaning upper suction shaft with external water connection, stainless steel leaf grid, area approx. 2 m², pneumatic lifting/lowering with vibration mechanism, turbine wheel made from 8 mm Hardox 700, housing dome made from integrated Hardox AISI 316, filling via hose with check valve, Wilden water pump, P1, diaphragm pump, dry-run safe, leaf suction system at rear, reversing camera with monitor in cab, PM 10, broom and shovel holder, cable remote control.

Year of construction: 2023, condition: new, HARTING Type 2 EV Charging Cables – New Bulk Stock We offer a large quantity of new and unused HARTING Type 2 electric vehicle charging cables, available in two different versions. Available types: Type 1 – 3-Phase * Manufacturer: HARTING * Part number: A0 * Reference: EVBCBL1074007.1 * Current: 20 A * Connection: 3-phase * Cable length: 6.23 m Type 2 – Single-Phase * Manufacturer: HARTING * Part number: A0 * Reference: EVBCBL1069632.2 * Current: 32 A * Connection: 1-phase * Cable length: 6.23 m Condition: New and unused, supplied in original packaging. Dsdpfx Ao Ahil Doiiokw These charging cable assemblies feature a Type 2 vehicle connector and open cable ends for integration into EV charging stations and wallboxes. Large quantities available in stock. Suitable for EV charging equipment manufacturers, installers, distributors, and wholesale buyers. Bulk purchases are welcome. Location: Rotterdam, The Netherlands Delivery terms: EXW Rotterdam

Condition: good (used), functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 510 mm, CNC milling machine, type Fadal VMC3016 904, for sale. The machine is in perfect working order and is currently in use – inspections can be carried out while the machine is running. Includes documentation and a PC for the machining programs. - SK-40 spindle mount - Spindle speed: 7,500 rpm - 10-position tool changer - X-axis: 760 mm - Y-axis: 400 mm - Z-axis: 510 mm - Weight: approximately 3800 kg Loading will be done using a forklift. Please feel free to contact us if you have any questions. Dsdj Ahkafepfx Aiiokw

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 2,000 h, AMV 7450D SHOTCRETE ROBOT – DISMANTLED SHOTCRETE APPLICATION UNIT – 2012 For sale: a professional, dismantled AMV 7450D Shotcrete Robot application unit, designed for wet-mix shotcrete application. The unit was manufactured by the renowned Norwegian company AMV Andersen Mek. Verksted AS, which specializes in the design of machinery for tunnel, mining, and underground operations. IDENTIFICATION DATA: Djdpfx Ajzw T Sxeiiekw * Manufacturer: AMV Andersen Mek. Verksted AS, Norway * Model: AMV 7450D Shotcrete Robot * Year of unit manufacture: 2012 * Serial number: 12-0070 * Year of base vehicle manufacture: 2012 * Original chassis: Mercedes-Benz Actros * Type: mobile shotcrete robot * Application technology: wet-mix method * Number of operators: 1 * Operating voltage: 400 V AC * Permissible/technical weight as indicated on the AMV nameplate: 44,500 kg – parameter related to the complete machine configuration * Current condition: unit is dismantled from the chassis KEY OPERATIONAL PARAMETERS: * Maximum concrete pump output: up to 25 m³/h * Vertical reach of the boom: approximately 13.7 m * Horizontal reach of the boom: approximately 13.7 m * Working material: shotcrete * Operating method: wet-mix shotcrete application * Working system: specialized tunnel boom with spray nozzle * Unit power supply: 400 V AC * Water tank: capacity to be confirmed * Operating pressure of the system: to be confirmed based on technical documentation * Actual weight of the dismantled unit: to be confirmed DEVICE DESCRIPTION: The AMV 7450D is a specialized shotcrete robot designed for efficient and precise application of concrete in challenging underground environments and on large infrastructure projects. The extended working boom allows for shotcrete application at height and in hard-to-reach locations that are inaccessible to conventional concrete pumps. The output of up to 25 m³ of concrete per hour enables efficient execution of large areas and work requiring rapid ground stabilization. The machine is designed to be operated by a single operator. This solution reduces the number of workers in the immediate shotcrete application zone, improving safety and control over the process. * construction of concrete tunnel linings, * shotcrete application in road and railway tunnels, * mining and quarrying operations, * reinforcement of underground excavations, * securing rock walls and ceilings, * ground stabilization after excavation, * reinforcement of shafts and underground chambers, * construction of subways and other underground structures, * stabilization of slopes and embankments, * execution of landslide protection measures, * geotechnical works, * protection of foundations and deep excavations, * reinforcement and repair of concrete structures, * repair of dams, canals, and other hydraulic structures, * protection of rock surfaces against spalling, * work on hydroelectric power plants and technical tunnels, * execution of specialized infrastructure contracts. The equipment is intended primarily for tunnel, mining, geotechnical, construction, and hydraulic companies, as well as companies engaged in the repair and modernization of specialized AMV machinery. Additional photos, videos, nameplate photos, and information regarding the included equipment can be provided. Please feel free to contact me for further information and to arrange a viewing.

Condition: used, functionality: fully functional, machine/vehicle number: 36521, mileage: 158,300 km, power: 315 kW (428.28 HP), first registration: 07/2022, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6d, suspension: steel-air, loading space volume: 37.5 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, seat heater, traction control, truck registration, The mileage of the vehicles offered may vary, as some vehicles are currently in rental use! Djdpfx Aj Ahqkujiiekw Further comparable vehicles are available upon request. Fuel tank 290 L, AdBlue tank 60 L, disc brakes, ABS, ASR, ESP, lane keeping assist, attention assist, active brake assist, active sideguard assist, cruise control, hill start assist, cable remote control for air suspension, PSM 2nd generation, front underrun protection, exhaust system with tailpipe on the right-hand side, differential lock on rear axle, steered trailing axle Driver's comfort suspension seat, co-driver's functional seat, multifunction steering wheel, digital tachograph ADR, multimedia radio touch, pre-wiring for toll collection, circuit breaker, air conditioning, sunroof, MirrorCam, Truck Data Center 7, interface for fleet management system FMS, additional socket 12/15A, pre-wiring for electrical equipment, compressed air connection Rear section: "XL-Whale" loading volume net 37.5 m³; filling shaft volume net: 9.6 m³; compression plate with scraper to the ground; cab protection roof, hydraulically foldable; cab protection roof made of GRP; follower panel with inverted cab protection roof; third flap as wind deflector; quiet and low-wear vane pump; clear operating unit, operation of all loading functions with a single control lever (joystick) and operator guidance via color display; operation of the unloading function from the cab; self-diagnosis system with plain text display; forks, bilateral adjustment (adjustment dimension 1,280mm-1,890mm) and integrated 1.1 hook (container according to 840 2-3); LED arm marker lights, without turn signals; 2 arm guide rollers in tilting position; 1x LED rotating beacon mounted on top at the rear; 1x LED work light on the filling shaft; 1x LED work light behind the cab; 2x LED gooseneck lights, marker lights below; 2x LED marker lights above; 1 LED rotating beacon at the bottom rear right; 2 LED flashing lights at the front under the protective cover; 2 LED work lights at the front; 2 LED work lights for illuminating the rear axle with 15 km/h cut-off; 2 LED reversing lights on both sides, linked to reverse gear; central lubrication system incl. electric pump; camera system - front camera, rear monitoring and roof camera for the filling shaft; remote control with position locking; speed increase via remote control; contour marking; Holder for shovel and broom; aluminum ladder with step limiter; 2 x A-marking; fork scale - WELVAARTS.

Condition: used, mileage: 603,658 km, power: 316 kW (429.64 HP), first registration: 03/2021, fuel type: diesel, tire size: 315/80 R22.5, axle configuration: 4x2, fuel: diesel, brakes: retarder, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Equipment: ABS, central locking, cruise control, electric window regulation, fridge, power mirror, retarder, soot filter, = Additional Options and Accessories = - Particle filter Dkodpfxs Ahq Dij Aiisw - Alternating current - Central lubrication system = Additional Information = Year of manufacture: 2021 Tire size: 315/80 R22.5 Brakes: Disc brakes Front axle: Steerable; Tire tread depth left: 70 mm; Tire tread depth right: 5 mm; Suspension: Leaf spring suspension Rear axle: Double tires; Tire tread depth left inner: 8 mm; Tire tread depth left outer: 6 mm; Tire tread depth right inner: 5 mm; Tire tread depth right outer: 3 mm; Suspension: Air suspension Unladen weight: 7,153 kg Payload: 10,847 kg GVW: 18,000 kg Damage: None

Condition: used, Year of construction: 2005, functionality: fully functional, ABB Robotics IRB 2400 robot - IRB2400/16 Type B Standard / M2000 - S4Cplus controller (Serial No. 24-29753) Manufactured on 08.12.2005 Key technical data of the IRB 2400 family The exact performance values depend on the specific sub-variant (e.g., Standard, /10, /16, or /L): • Payload: Typically 10 kg to 20 kg (standard variants often with 16 kg; the long-arm variant IRB 2400L has a maximum payload of 7 kg). Reach: Depending on the design, from 1,550 mm to 1,800 mm for the long-arm model. Degrees of freedom: 6 axes for maximum flexibility. • Self-weight: Approx. 380 kg (pure manipulator without controller). Dsdps Ahpyrjfx Aiiokw • Mounting: Extremely flexible – can be placed on the floor, mounted on the wall, or completely suspended from the ceiling. Typical application areas Thanks to its high path accuracy and robust design, this articulated-arm robot is primarily used in the following areas: • Arc welding: One of the main application areas for this type. • Material handling & machine loading: Fast handling of components. • Process applications: Cutting, deburring, grinding, polishing, and applying adhesives or sealants. Compatible controllers Depending on the year of manufacture and generation, the IRB 2400 is operated with different ABB controllers: • Older models: S4, S4C, or S4Cplus controllers. • Modern/current models: Usually equipped with the IRC5 controller (M2004) or the newer OmniCore systems.

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 5,992 h, load capacity: 4,000 kg, lifting height: 5,550 mm, free lift: 1,750 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 2,600 mm, motor manufacturer: GM, gearing type: hydrostat, fork carriage width: 1,360 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 28X12,5-15, overall weight: 10,400 kg, empty load weight: 6,400 kg, total height: 2,550 mm, total length: 2,350 mm, total width: 2,250 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, COMBILIFT C4000S – 2018 | 5992 HOURS | LPG | TRIPLEX 5550 mm | FORK POSITIONER | FULL FREE LIFT ✅ Ready to work from day one – no additional investment, no risk. Are you looking for a machine that will keep your operation running without unexpected downtime? This COMBILIFT C4000S is a fully serviced and thoroughly inspected forklift, ready for immediate operation. No hidden costs and no surprises. 🔧 The machine has undergone a major full service, including replacement of oils and filters, as well as inspection of all components. It is in excellent technical and visual condition – like new. With only 5992 operating hours, the forklift has seen genuinely low usage. It is also equipped with brand-new tyres, meaning no additional investment is required. 📋 Technical specifications: • Capacity: 4000 kg • Engine type: LPG / GAS • Mast type: TRIPLEX • Lifting height: 5550 mm • Free lift: 1750 mm • Fork positioner: 1360 mm • Fork length: 1200 mm • Fully enclosed and heated cabin • Operating hours: 5992 • Load centre: 600 mm • Truck weight: 6400 kg • Overall closed height: 2600 mm • Height: 2550 mm • Length: 2400 mm • Width: 2250 mm • Super elastic tyres (100% new) • Front tyres: 200/50-10 • Rear tyres: 28x12.5-15 🏭 The forklift is ideal for warehouses with narrow aisles, timber, steel and pipe industries, transportation of long loads, and both indoor and outdoor operation. ✅ You are not buying a “used forklift”. You are buying a fully prepared, tested and work-ready machine. Every forklift undergoes comprehensive testing before sale and is ready for immediate implementation. 🎥 We can also arrange a live online presentation of the machine and organize delivery directly to your company. 🚛 We provide transport throughout Europe, complete logistics support, assistance with leasing and financing, as well as after-sales service and technical support. 🏆 FT LOGISTICS delivers forklifts that work – not machines that spend time in service workshops. We currently offer over 100 machines, provide in-house servicing and equipment preparation, and have experience supplying customers throughout Europe with hundreds of satisfied clients. 📞 Contact us today. FT LOGISTICS – Quality You Can Rely On. Service You Can Trust. Djdpfx Ais Ahrd Rjiskw

Condition: new, Approx. 14 running meters , H: 500 cm , Shelf load: 4500 kg , Pallet racking , Heavy duty racking , High bay racking , Industrial racking , Shelving Immediately from stock Data : - Height : approx. 500 cm - Depth : approx. 110 cm - Length : approx. 14 running meters - Load: 4500 kg shelf load - Stand in galvanized - Cross beams 270 x 15 x 5 cm, T45 - Cross beams in orange - New BLT PR50/101 - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 06 x upright approx. 500 cm x 110 cm, disassembled. - 30 x crossbar approx. 270 x 15 x 5 cm, T45. - 60 x safety pins. - Levels: Floor + 3 - 60 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 2940,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Dkedpfx As Ahpthjiijw The pre-assembly of the frames can be carried out by us for a small surcharge of 12.50 €/net per piece. Transportation : Delivery can be carried out by our partner forwarding agency on request, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2022, approx. 100.16 running meters, height: 550 cm, shelf load: 3000 kg, pallet racking, heavy-duty racking, high-bay racking, industrial racking, racking immediately from stock Data : - Height : approx. 550 cm - Depth : approx. 110 cm - Length : approx. 100.16 running meters - Load: 3000 kg shelf load - Galvanized uprights - Cross beams 270 x 14 x 5 cm, T30 - Cross beams in orange - New BLT / PR55 - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 037 x upright approx. 550 cm x 110 cm, disassembled. - 216 x crossbar approx. 270 x 14 x 5 cm, T30. Dksdpfx Aj Ahprysiiew - 432 x safety pins. - Levels: Floor + 3 - 432 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 14.930,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. The pre-assembly of the frames can be carried out by us for a small surcharge of 12.50 €/net per piece. Transportation : Delivery can be carried out by our partner forwarding agency on request, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: like new (used), functionality: fully functional, Year of construction: 2022, overall weight: 8 kg, /ct2486/ New ebm-papst S3G450-LA45-63 EC axial fan, 450 mm ⌀, 230 V, 350 W, 6000 m³/h, multiple units available Dkedpfx Aie Ahn N Asiew Manufacturer: ebm-papst - Model: S3G450-LA45-63 - Power supply: Single-phase, 230 V AC - Frequency: 50/60 Hz - Power input: 350 W - Current consumption: 1.5 A - Rotational speed: 1250 rpm - Airflow: 6000 m³/h - Protection rating: IP54 - Maximum static pressure: 110 Pa - Static efficiency: 42.2% (within the measurement category) - Efficiency class: N = 51.9; required value: N40 - Control: Integrated electronic speed control - Control input: 0–10 V / PWM - Auxiliary voltage output: +15 V - Number of blades: 5 - Conformity markings: CE, EAC - Country of manufacture: Germany

Condition: used, functionality: fully functional, machine/vehicle number: 200123013-09, Year of construction: 2018, type of input current: three-phase, overall weight: 1,360 kg, input voltage: 208 V, input frequency: 50 Hz, laser power: 10,000 W, feed length X-axis: 381 mm, feed length Y-axis: 330 mm, feed length Z-axis: 457 mm, We offer a used 3D Systems PROX 500 3D printer, model ProX 500 (132540-00 Rev A), designed for polymers, manufactured in 201. Manufacturer: 3D Systems, Inc. Model: ProX 500 Materials: Polymers Serial Number: 200123013-09 Dkodpfx Aie Ahq I Rjisw Electrical Supply: 208 V AC, three-phase, 50/60 Hz Apparent Power: 10 kVA Weight: 1360 kg Short-circuit interrupting current: 200 kA Electrical Diagram Number: 132508-00 Laser Class: Class 1 laser product; Class 4 laser inside Included option: ProX MQC (2017) S/N 20052303004 Donalson Torit DCE If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, with new grinding wheel, 175 mm used good condition cleaned functionality tested partially refurbished planing iron chisel Manufacturer: Iseli Type: FL/T SM 175 H CE type-tested Dkedpo Ahr Agofx Aiisw 380 V Grinding wheel diameter mm: 90 / 175 New price approx. €: 4000.00 Space requirement approx. L x W x H mm: 600x500x550 Weight approx. kg: 15 Total connected load approx. kW: 0.7 Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected without guarantee and warranty

Condition: used, functionality: fully functional, machine/vehicle number: 34102, mileage: 29,990 km, power: 290 kW (394.29 HP), first registration: 09/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,300 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6, suspension: steel-air, loading space volume: 33 m³, Equipment: ABS, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), power assisted steering, power mirror, tachograph, traction control, truck registration, The mileage of the vehicles on offer may vary, as some units are currently in rental service! Additional comparable vehicles available upon request. M2Q engine OM470, inline 6-cylinder, G2B transmission G 211-12/14, steered trailing axle, 290 l fuel tank, 60 l AdBlue, front underrun protection, ABS, ASR, ESP, lane departure warning system, attention assist, Active Brake Assist 5, cruise control, tyres: 1st axle 385/55 R22.5, 2nd and 3rd axles 315/70 R22.5. MirrorCam, comfort driver's air-suspended seat, functional passenger seat, multimedia cockpit, navigation system, digital radio, air conditioning. Rear body: "L-Kelpie" net loading volume 33 m³; net chute intake volume: 9.6 m³; press plate with floor scraper; cab protection cover hydraulically foldable; GRP cab roof protector; follower panel with inverted cab roof protection; third flap as windscreen, Sulo lid opener; quiet, low-wear rotary vane pump; clear control unit, all loading functions operated via a single joystick and user guidance through color display; unloading function can be operated from the cab; self-diagnosis system with plain text display; extended forks, adjustable on both sides (adjustment range 1,280–1,890 mm) with integrated type 1.1 holder (containers per DIN 840 2-3); LED arm position lights, no indicators; 2 arm guide rollers in tipping position; 1x LED rotating beacon mounted at the top of the rear; 1x LED work light at the filling chute; 1x LED work light behind cab; 2x LED gooseneck lights, lower marker lights; 2x upper LED marker lights; 1 lower right rear LED rotating beacon; 2 front LED strobe lights under the protective roof; 2 front LED work lights; 360° LED safety lighting with 15 km/h automatic switch-off; 2 LED reverse lights on both sides, linked to reverse gear; centralized lubrication system incl. electric pump; camera system: front camera, reversing surveillance, and roof-mounted chute camera; radio remote control with positional binding; remote engine speed increase; contour markings; mount for shovel and broom; aluminium ladder with climb restrictor; 2 x A identification; MOBA fork scale. Dkedpfsyc R T Esx Aiiow

Year of construction: 2021, operating hours: 16,132 h, condition: used, functionality: fully functional, For sale is a Lauber energy utilization unit, model L-ENZ 280-L-S, which was purchased directly from Lauber GmbH in 2021, installed, and connected. The unit was used exclusively for wood drying in drying containers at a biogas plant and was operated primarily during the summer. Therefore, it was not used continuously throughout the year. The current operating hours are 16,132. The unit is in very good and well-maintained condition, is currently still connected, and is operational. Technical data: • Manufacturer: Lauber GmbH • Type: L-ENZ 280-L-S • Unit No.: 42799 • Year of manufacture: 2021 • Operating hours: 16,132 h • Motor power: 7.5 kW • Variable frequency drive circulation pump: 0.75 kW • Total rated power: approx. 9 kW • Motor rated current: 14.3 A • Total rated current: approx. 17 A • Fuse rating: 25 A • Rated voltage: 3/N/PE AC 400/230 V, 50 Hz • Control voltage: 24 V DC • Wiring diagram: SP1551 Equipment / Documentation • Original invoice from 2021 available Dksdpfx Aie Ahpm Hsijw • Operating manual available • Unit is currently still connected • On-site inspection possible by appointment Location 71282 Hemmingen The unit can be inspected on-site. Since it is currently still connected, the condition of the unit and the existing technology can be directly assessed on-site. Price €29,000 (negotiable)

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 235 h, load capacity: 230 kg, mast type: telescopic, lifting height: 15,700 mm, lifting power: 230 kg/m, platform length: 760 mm, platform width: 1,550 mm, overall weight: 7,112 kg, empty load weight: 6,882 kg, transport length: 6,500 mm, transport width: 1,700 mm, transport height: 1,980 mm, construction height: 1,980 mm, fuel type: hybrid, fuel tank capacity: 50 l, tire size: 240X55 D17,5, tire condition: 100 %, drive condition: 100 %, wheelbase: 2,050 mm, ground clearance: 160 mm, color: orange, 🚀 JLG M450AJ HYBRID | 2017 | 235 Hours | Articulating Boom Lift 🔹 JLG M450AJ Hybrid articulating boom lift for sale, in excellent technical and cosmetic condition. This 2017 machine has exceptionally low operating hours, only 235 hours from new. Following a comprehensive technical inspection, it is fully operational and ready for immediate use without any additional investment. 📋 Technical Specifications 🏭 Manufacturer: JLG 🔧 Model: M450AJ Hybrid 📅 Year of Manufacture: 2017 ⏱️ Operating Hours: 235 hours ⚡ Drive Type: Hybrid (Electric + Diesel) 📏 Working Height: 15.72 m 📐 Platform Height: 13.72 m ↔️ Horizontal Reach: Up to 7.89 m 🏋️ Platform Capacity: 230 kg 🚜 Type: Self-Propelled Articulating Boom Lift ✅ Features and Benefits ✔️ Hybrid drive system – ideal for both indoor and outdoor applications ✔️ Quiet and emission-free operation in electric mode ✔️ Excellent horizontal reach thanks to the articulating boom design ✔️ Proportional controls for precise and smooth operation ✔️ Non-marking tires ✔️ Compact transport dimensions ✔️ Ideal for installation, maintenance, servicing, and construction work 🏭 This machine is perfectly suited for warehouses, logistics centers, industrial facilities, production plants, commercial buildings, and construction sites. ⭐ With only 235 operating hours from new, the machine shows minimal wear and remains in outstanding condition. It is one of the lowest-hour JLG M450AJ Hybrid units currently available on the used equipment market. 🤝 Why Choose FT Logistics? FT Logistics specializes in the sale of forklifts, sideloaders, multidirectional forklifts, warehouse equipment, and material handling machinery. We provide carefully selected equipment, professional technical support, and expert advice to help customers choose the right machine for their specific requirements. 📦 Our inventory includes a wide range of equipment from leading manufacturers, available for immediate delivery. 🌍 Our Services 🚛 Transport arrangements throughout Europe 📄 Assistance with export procedures and documentation 🔧 Technical support Dsdpo Ahwmqefx Aiiskw 💻 Online machine presentations 📸 Additional photos and videos available upon request 📞 Please contact us for further information, pricing details, or a tailored offer. We offer a wide selection of forklifts, sideloaders, multidirectional forklifts, and warehouse equipment to suit a variety of industries and applications. 🏢 FT LOGISTICS Quality You Can Rely On. Service You Can Trust.

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 300 kg, travel distance X-axis: 320 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 260 mm, total height: 1,800 mm, total length: 1,650 mm, total width: 1,150 mm, wire diameter (max.): 18 mm, workpiece height (max.): 400 mm, workpiece width (max.): 580 mm, workpiece length (max.): 580 mm, type of input current: three-phase, table width: 600 mm, overall weight: 1,700 kg, table length: 600 mm, table height: 380 mm, empty load weight: 1,400 kg, warranty duration: 12 months, table load: 300 kg, input voltage: 400 V, quill travel distance: 80 mm, quill diameter: 6 mm, quill stroke: 80 mm, stroke length: 80 mm, tank capacity: 110 l, cutting speed: 600 mm/min, input current: 6 A, positioning accuracy: 2 mm, Equipment: documentation/manual, Digima DK7732 CNC EDM Wire Cut Machine – 320 × 400 mm The Digima DK7732 is a compact CNC EDM wire cutting machine designed for precise machining of small and medium-sized metal components. It is suitable for tool rooms, mould and die production, maintenance workshops, precision engineering companies, as well as single-piece and batch production. The machine provides an X/Y working travel of 320 × 400 mm, a 380 × 600 mm worktable, a maximum workpiece height of 400 mm, and a maximum permitted workpiece weight of 300 kg. Its rigid construction and machine weight of 1,400 kg help reduce vibration and support stable, repeatable machining. EDM wire cutting technology allows the machine to produce accurate contours, narrow slots, holes and complex shapes in electrically conductive materials, including hardened metals that may be difficult to process using conventional cutting tools. Real photos in the gallery - machine comes new Main Advantages CNC-controlled EDM wire cutting machine Compact design suitable for smaller production areas X/Y worktable travel of 320 × 400 mm Large 380 × 600 mm worktable Max. workpiece height of 400mm Max. workpiece weight of 300kg Stable 1,400kg machine construction Suitable for complex contours and precision components Designed for mould, die and tool production Suitable for single-piece and serial production Low operating energy requirements Reduced molybdenum wire consumption Suitable for long, continuous machining cycles Technical Specification Parameter Specification Brand Digima Model DK7732 Machine type CNC EDM wire cut machine Condition New Worktable dimensions 380 × 600 mm X/Y worktable travel 320 × 400 mm Maximum workpiece height 400 mm Taper capability 6° / 80 mm Maximum workpiece weight 300 kg Machine net weight 1,400 kg Machine dimensions 1,650 × 1,150 × 1,800 mm Control system CNC/MNC Movement method Linear control Control method Open-loop control Processing accuracy 0.01–0.02 mm Dodpfoznttdsx Aiiokw Molybdenum wire diameter Ø0.13–Ø0.18 mm Maximum wire speed 600 m/min Maximum cutting speed 200 mm²/min Best surface roughness ≤ Ra 0.8 µm Maximum working current 6 A Rated power 2 kVA Water tank capacity 110 litres Water filtration accuracy 0.005 mm Application Electrically conductive metal materials With a stated processing accuracy of 0.01–0.02 mm, cutting speeds of up to 200 mm²/min, and a best surface finish of up to Ra 0.8 µm, the DK7732 is suitable for applications where dimensional accuracy and surface quality are important. Stable and Economical Operation The DK7732 is designed for stable processing, relatively fine surface quality, low energy consumption and reduced molybdenum wire wear. It is particularly suitable for users who prioritise economical operation and long continuous machining cycles rather than exceptionally high cutting productivity. Delivery and Availability Availability: available / one left in stock Estimated delivery time: approximately 90 working days, only one we have left in stock Transport and installation conditions: to be agreed individually Availability and delivery information should be confirmed before placing the final order. The Digima DK7732 combines a practical working range, rigid construction, high workpiece capacity and economical EDM technology. It is a suitable solution for companies looking for a compact wire cutting machine for accurate machining of moulds, dies, tools and specialised metal components.

Year of construction: 2013, condition: good (used), Ref. no.: 18592 Manufacturer: SEALPAC Type: Sealpac A5 Year of construction: 2013 Further information: TECHNICAL DATA Feature Specification Manufacturer SEALPAC GmbH Model SEALPAC A5 Machine Type Tray Sealer / Schalenverschließanlage Serial Number A5-01-2661 Year of Manufacture 2013 Electrical Connection 3 x 400 / 230 V Dodpfx Aisy Udgdeiskw Frequency 50–60 Hz Installed Power max. 8 kW Machine Weight approx. 1,600 kg Control System Touchscreen control panel Construction Stainless steel Working Environment Cleanroom / Clean room Application Areas Medical / Food / Technical packaging SEALPAC A5 Tray Sealer Used – Excellent Condition – From Cleanroom Production Previously used for cleanroom packaging of medical and laboratory consumables, including pipette tip racks. This high-quality SEALPAC A5 tray sealing machine is designed for professional packaging applications where hygiene, reliability and process stability are essential. The machine was previously operated in a cleanroom environment, making it particularly suitable for medical, laboratory and sensitive packaging applications. Thanks to its stainless steel construction, compact design and user-friendly control system, the machine offers reliable and efficient production performance. As visible in the photos, the machine is in very clean and well-maintained condition. General Condition The machine is currently dismantled and stored. Visual condition is very clean and the machine was previously used in a professional production environment.

Condition: used, mileage: 372,463 km, power: 368 kW (500.34 HP), first registration: 01/2023, fuel type: diesel, tire size: 315/70 R22.5, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Equipment: ABS, central locking, cruise control, electric window regulation, fridge, parking heater, power mirror, second fuel tank, spoiler, = Additional Options and Accessories = - CD player - Roof spoiler - Speed limiter - Aluminum fuel tank - Alloy wheels - Stability control - Sun visor - Alternating current - Tool kit Dodj Ahxtqopfx Aiiekw = Additional Information = Year of manufacture: 2023 Cab: Globetrotter Tire size: 315/70 R22.5 Brakes: Disc brakes Front axle: Alloy wheels; Steered; Tire tread depth left: 14 mm; Tire tread depth right: 14 mm; Suspension: Leaf spring suspension Rear axle: Dual tires; Alloy wheels; Tire tread depth left inner: 7 mm; Tire tread depth left outer: 7 mm; Tire tread depth right inner: 7 mm; Tire tread depth right outer: 7 mm; Suspension: Air suspension Damage: None

Condition: excellent (used), functionality: fully functional, mileage: 500,000 km, power: 235,359.88 kW (320,000.00 HP), first registration: 11/2011, fuel type: diesel, maximum load weight: 3,600 kg, overall weight: 18,000 kg, tire size: 225/75R17.5, axle configuration: 6x4, wheelbase: 3,690 mm, axle spacing: 3,690 mm, fuel: diesel, brakes: engine braking, color: white, gearing type: mechanical, emission class: euro5, suspension: air, loading space length: 5,350 mm, loading space width: 2,460 mm, loading space height: 2,300 mm, Year of construction: 2011, operation weight: 18,000 kg, Equipment: ABS, car registration, cooling unit, low noise, onboard computer, tail-lift, truck registration, IVECO EUROCARGO ML100E18T CUBE - Chassis ZCFA1AD0402587102 – LICENSE PLATE GH238WV Year: 03/11/2011 - EURO 5 Engine: 4-cylinder common rail – 3920 cc – 180 hp - 500,000 km 6-speed manual transmission Body: Exterior cab color: white / Interior cab color: white Tires: size 225/75r17.5 CHASSIS: Wheelbase: 3690 mm - Short cab - Mechanical front and rear suspension Gross vehicle weight: 100 quintals - Payload: 36.80 quintals TECHNICAL EQUIPMENT - TRUCK: Manual transmission, Euro 5, ABS, Engine brake with retarder function, Immobilizer, Power steering, Clutch booster Electronic speed limiter, Pneumatic driver's seat, Electric windows, Electrically heated rearview mirrors BODY: ISOTHERMIC VAN Brand: LE CAPITAINE - Serial number: 11111573 - Year of construction: 10/2011 Dkedpfx Aozmc Hwoiiow Internal usable dimensions: 5.35 * 2.46 H 2.30 - 01 side door on the right side - 02 rear doors with full opening STANDALONE DIESEL REFRIGERATION UNIT - road / mains Brand: CARRIER - Model: SUPRA 550 - Serial number: TC139066 ATP category FNA, currently valid - Renewed for 6 years RETRACTABLE TAIL LIFT Brand: DHOLLANDIA - Serial number: 11060620 - Lifting capacity: 10 quintals

Condition: excellent (used), mileage: 934,000 km, power: 301 kW (409.25 HP), first registration: 06/1999, fuel type: diesel, tire size: 315/75R22,5, axle configuration: 6x4, wheelbase: 4,800 mm, fuel: diesel, fuel tank capacity: 600 l, color: white, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro2, suspension: steel-air, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 13,000 kg, permissible axle load (axle 3): 7,500 kg, Equipment: ABS, differential lock, parking heater, power mirror, seat heater, = Additional Options and Accessories = - 2 bunks - 600-liter diesel tank - Heated exterior mirrors - Central lubrication system - Comfort driver's seat - Differential lock - High beam headlights - Speed limiter - Hub reduction - Radio/CD player - All-round lighting Dkodpfouy I Insx Aiisw - Sleeper cabin - Sun visor - Auxiliary heater - ZF16 manual gearbox = Notes = HEAVY DUTY M.A.N. 26.414 (F2000) 6x4 SLEEPER CAB CHASSIS, EURO 2, REDUCTION AXLE & ZF16 MANUAL GEARBOX! ! 410 HP, EURO 2, 6-CYLINDER ENGINE, (6-CYLINDER HEADS)!! ZF16 MANUAL GEARBOX!! STEEL/AIR SUSPENSION!! REDUCTION AXLES!! SUN VISOR!! ETC.!! CHASSIS LENGTH BEHIND CABIN approx.: 6.37 m!! (PERFECT FOR A 6.50 - 8 METER BOX)!! TRUCK IS IN GOOD DRIVING CONDITION, READY FOR WORK!! MORE M.A.N. 4x2 / 6x4 / 8x4 (CONSTRUCTION) TRUCKS IN STOCK FOR SALE!! (>75 TRUCKS/TRAILERS IN STOCK)!! PLEASE CHECK OUR WEBSITE FOR OUR CURRENT STOCK!! SHIPMENT, STACKING, TRANSPORT OR LOADING? NO PROBLEM FOR US, WE ARE A "ONE STOP SHOP" COMPANY!! YOU CAN ALSO CHECK OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! ( / ) ENGEL TRUCKS; "YOUR GLOBAL TRADING PARTNER" = Further Information = General Information Year of Construction: 1999 Technical Information Number of cylinders: 6 Engine displacement: 11,967 cc Transmission Transmission: ZF16 MANUAL GEARBOX, 16 gears, manual transmission Axle Configuration Front axle: Tire size: 315/75R22.5; Max. axle load: 7500 kg; Steered; Tire tread depth left: 60%; Tire tread depth right: 60%; Brakes: Disc brakes; Suspension: Leaf spring suspension Rear axle 1: Tire size: 315/80R22.5; Dual tires; Differential lock; Max. axle load: 13000 kg; Tire tread depth left (inner): 40%; Tire tread depth left (outer): 40%; Tire tread depth right (inner): 40%; Tire tread depth right (outer): 40%; Reduction: External planetary axles; Brakes: Drum brakes; Suspension: Air suspension Rear axle 2: Tire size: 385/65R22.5; Max. axle load: 7500 kg; Tire tread depth left: 20%; Tire tread depth right: 20%; Reduction: External planetary axles; Brakes: Drum brakes; Suspension: Air suspension Weights Unladen weight: 9,230 kg Payload: 17,770 kg GVW: 27,000 kg Functional Body brand: ZF Loading platform height: 106 cm Condition Technical condition: very good Optical condition: good Further Information Please contact the Sales Department or Erik Engel for more information.

Condition: used, mileage: 170,075 km, power: 99 kW (134.60 HP), first registration: 07/2015, fuel type: diesel, tire size: 225/70R15C, axle configuration: 4x2, fuel: diesel, color: other, gearing type: mechanical, emission class: euro6, suspension: steel, total length: 6,150 mm, total width: 2,100 mm, total height: 2,700 mm, Equipment: ABS, central locking, cruise control, electric window regulation, power mirror, = Additional Options and Accessories = - CD player - Spare key - Speed limiter - Stability control - Alternating current = Additional Information = General Information Year of manufacture: 2015 Axle Configuration Dksdpfsz Huizox Aiiow Tire size: 225/70R15C Brakes: Disc brakes Suspension: Leaf spring suspension Front axle: Steerable; Tire tread depth left: 5 mm; Tire tread depth right: 6 mm Rear axle: Tire tread depth left: 7 mm; Tire tread depth right: 7 mm Weights Unladen weight: 2,050 kg Payload: 1,450 kg GVWR: 3,500 kg Condition Damage: None

Condition: ready for operation (used), Year of construction: 2001, operating hours: 90,842 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 190 mm, travel distance Y-axis: 40 mm, travel distance Z-axis: 555 mm, total height: 1,950 mm, total width: 2,220 mm, overall weight: 6,500 kg, product length (max.): 4,770 mm, number of axes: 6, This 6-axis Gildemeister MF twin 65 turn-mill centre was manufactured in 2001. It features a swing diameter of 240 mm and a normal turning diameter of 200 mm. The machine offers a spindle distance of 800 mm and a maximum spindle speed of 5000 rpm. If you are looking to get high-quality turning and milling capabilities, consider the Gildemeister MF twin 65 turn-mill centre we have for sale. Contact us for further details. TECHNICAL SPECS:- Bed Design: 45° slant bed, roller guide ways- Swing Diameter: 240 mm- Normal Turning Diameter: 200 mm- Spindle Distance: 800 mm- Slide 1 X/Z Travel (Cross/Longitudinal): 190 / 555 mm- Slide 2 X/Z Travel (Cross/Longitudinal): 190 / 555 mm- Slide 1 Y-Axis Travel : 40 mm- Spindle 2 Longitudinal Travel: 600 mm- Main Spindle 1 (Left): - Chuck Diameter: 200 mm - Max Bar Capacity: 65 mm - Spindle Head Flat Flange: 170 h5 - Spindle Bore: 79 mm - Draw Tube Inner Diameter: 66 mm - Front Bearing Diameter: 120 mm - Drive Power (40/100% ED): 28 / 21 kW - Speed Range: 25 - 5000 rpm (min⁻¹) - Knee Speed: 850 rpm (min⁻¹) - Max Torque (40/100% ED): 320 / 240 Nm - Drive Type: AC / 1 (ISM) - C-Axis Rapid Traverse: 250 rpm (min⁻¹) - C-Axis Holding Torque: 200 Nm - C-Axis Indexing Accuracy: 0.025°- Counter Spindle / Main Spindle 2 (Right): - Chuck Diameter: 200 mm - Max Bar Capacity: 42 mm - Spindle Head Flat Flange: 140 h5 - Spindle Bore: 56 mm - Draw Tube Inner Diameter: 44 mm - Front Bearing Diameter: 90 mm - Drive Power (40/100% ED): 18 / 14 kW - Speed Range: 31 - 6300 rpm (min⁻¹) - Knee Speed: 1000 rpm (min⁻¹) - Max Torque (40/100% ED): 130 / 173 Nm - Drive Type: AC / 1 (ISM) - C-Axis Rapid Traverse: 250 rpm (min⁻¹) - C-Axis Holding Torque: 120 Nm - C-Axis Indexing Accuracy: 0.025°- Slide 1 (Upper): - Rapid Traverse X/Z: 20 / 30 m/min (without Y-axis) or 20 / 7.5 / 30 m/min (X/Y/Z with Y-axis) - Feed Force X/Z: 4 / 7 kN - Path Resolution: 0.001 mm - Ball Screw Pitch x Diameter: 12x28 / 15x32 mm (without Y) or 12x28 / 5x32 / 15x32 mm (with Y)- Slide 2 (Lower): - Rapid Traverse X/Z: 20 / 30 m/min - Feed Force X/Z: 4 / 7 daN (kN) - Path Resolution: 0.001 mm - Ball Screw Pitch x Diameter: 12x28 / 15x32 mm- Slide 3 (Spindle 2 Z-Movement): - Rapid Traverse A: 30 m/min - Feed Force A: 7 kN - Path Resolution A: 0.001 mm - Ball Screw Pitch x Diameter: 15x32 mm- Tool Turrets (Upper and Lower): - Number of Tool Stations: 2 x 12 - Tool Shank Diameter (DIN 69880 / VDI): 30 mm - Driven Tool Stations: 2 x 12 - Driven Tool Power (40/100% ED): 5 kW - Driven Tool Max Torque (40/100% ED): 16 Nm - Driven Tool Speed Range: 40 - 4000 rpm (min⁻¹)- Electrical Data: - Voltage: 400 V (3-phase, 50 Hz) - Connected Load: 65 kVA - Rated Current: 95 A - Back-up Fuse: 100 A - Auxiliary Voltages: 230 V / 24 V=- Hydraulics System: - Tank Capacity: approx. 25 L - Pump Power: 2.2 kW - Max System Pressure: 80 bar - Clamping Device Pressure: 80 bar- Coolant System & Filtration: - Tank Capacity: 200 L - Pump Power: 1.65 kW - Delivery Volume at 6 bar: 50 L/min - Equipped with band/paper filtration unit- Machine Dimensions & Weight: - Total Length (with Chip Conveyor): 4770 mm - Total Depth (with Electrical Cabinet): 2220 mm - Total Height (with Electrical Cabinet): 1950 mm Technical Specification Dodpfo Agvbqex Aiiekw Counter Spindle Yes Driven Tools Yes