Used Drip Pan for sale (19,964)

Condition: new, feed pressure 10,0 bar intake capacity 727 L/min Effective free air delivery 582 L/min Receiver capacity 90,0 Ltr. motor 400 V power capacity 4,0 kW weight of the machine ca. 91,0 kg. dimensions of the machine ca. 1040 x 450 x 850 mm Description : - mobile craftsman piston compressor - High-quality processed, 2-stage compressor block - with 2 cast iron cylinders and optimum efficiency - Finely ribbed cylinder and cylinder head for optimal temperature dissipation - low compressor speed to reduce the compression temperature and minimizing wear and tear - Very low residual oil content in the compressed air thanks to precision piston rings - Generously dimensioned solid rubber wheels and castors at the front - the start-up relief takes place via a mechanical vent valve - powder-coated compressed air tank in RAL 7035 Rcodpfx Aow U U Tajg Ash - Built in accordance with the European Pressure Equipment Directive - all fittings are sealed with easily removable special adhesive and can easily be exchanged if necessary The standard scope of delivery includes: - Condor pressure switch MDR 3 - a high quality filter pressure reducer - two pressure gauges - a condensate drain tap - a pre-assembled connection cable with 5-pin. connector and phase reversal

Year of construction: 2001, condition: like new (used), Filter area: 22 m²# Nominal volume flow: 4700 m³/h Minimum flow rate: 3530 m³/h Rcjdpfxsk Tahzo Ag Ash External pressure suction port at V min.: 2450 Pa Sound pressure level max.: 69 dB Suction nozzle Ø: 250 mm Suction engine speed: 3000 rpm Motor: 400V 5.5KW Required space: 2520 x 900 x 1963 mm Weight: 730 kg

Condition: used, Year of construction: 2008, operating hours: 3,438 h, cutting length (max.): 4,200 mm, cutting width (max.): 4,200 mm, Panel Dividing Saw Panhans S45, Year 2008 Read Operating Hours (Main Saw): 3,438 h Max. Cutting Length: 4,200 mm Max. Cutting Width: 4,200 mm Saw Unit Swivel Range: 0 – 45° Angle Cuts: ±45 degrees Angular Accuracy: ±0.01 mm Mitre Cuts Mitre Angles up to 46° Saw Blade Projection: 72 mm with blade vertical at 0° Saw Blade Projection: 50 mm with blade vertical at 45° Max. Stack Height: 60 mm Main Saw Blade: 350 x 4.4 x 30 mm Scoring Saw Blade: 180 x 4.55/3.5 x 30 mm Main Saw Motor: 14 kW Scoring Saw Motor: 1.5 kW Saw Unit Feed Motor: 1 kW Saw Unit Feed Rate: 0–80 m/min, stepless Saw Unit Return Speed: 100 m/min Cross Fence (Material Pusher): 1.1 kW Cross Fence Feed Rate: 0–25 m/min, stepless Cross Fence Return Speed: 120 m/min Scrap Cutting Facility Brush-sealed notches in the pressure beam for complete panel separation. Clamping Grippers: 8 pieces Gripper Spacing: 65/245/395/985/1605/2845 mm Fully Automatic Side Pressure Device, stepless 50–100 mm Sensor Cutting: Optical Device for Automatic Workpiece Measurement with variable trimming cut 3 Air Cushion Tables 600×1800 mm Air Supply by Blower: 2.2 kW Operating System: WIN EX Embedded Screen Control: VGA Monitor 17"/19" Control Functions Processing Mode: Production Manual Processing Mode: Production Order Processing Mode: Production Optimization PIOS PRO Processing Mode: Production Manual All necessary programs and machine functions for processing can be entered directly in a clear menu in this mode. Processing Options Single Cut, Series Cutting, Sensor Cut, Groove, Insert Grooves, Front Rabbet, Rear Rabbet, Formatting, Cutouts, Notches Processing Mode: Production Order In this mode, cutting plans, panel cutting plans, block cutting plans, and angle cutting plans created via the PIOS PRO optimization can be processed. Groove Program Convenient production of grooves, rabbets, and insert grooves in single and series cuts using: 2 presettable groove cutting depths Formatting Device End trimming stops mounted directly on the clamping grippers for sizing of panels with overhanging surface layers. Cutout Device For making precise glass cutouts (e.g. doors), notches (e.g. ventilation slots), and for insert grooves. Cutting Height Adjustment Electro-pneumatic, stepless Positioning Accuracy of Cutting Height: ±1 mm Label Printer Operating Pressure: 6 bar Operating Voltage: 400 Volt, 50 Hz Rated Power: 20 kW Weight: approx. 4,000 kg Dimensions (L x W x H): approx. 6,500 x 7,500 mm Rjdpfx Aew N D S Ijg Aech (Subject to changes and errors in the technical data. Prior sale reserved.)

Condition: as good as new (ex-display), Year of construction: 2025, The machine processes continuous corrugated board with a thickness of 2 - 5 mm (single and double wall) and up to a width of 2500 mm. The machine dimensions, including the continuous corrugated board (with a stack height of 1300 mm), are 3600 mm wide and 4000 mm long. The machine is equipped with 7 tools for automatic creasing and cutting of continuous corrugated board on demand. The system features a fully automatic side-by-side function, allowing the simultaneous processing of up to 2 widths (e.g., 1600 mm and 800 mm) of continuous corrugated board within the machine. Our Boxlink Pro Light system is included as production management software on the line. Rsdpfsxcvtcox Ag Aoch Installation and delivery are not included in the listed price. We are happy to offer these services optionally after consultation. We will gladly provide a machine data sheet upon request.

Condition: used, Spänex TAW compact 215 dry extraction wall Paint mist extraction wall with dry separator Complete air supply system Rodpjwlf E Aefx Ag Aoch Hot water heating coil Spray room control with touchscreen 2 x 2.0 kW drive power 6000 m³/h air flow Year of construction 2011 From a carpentry shop liquidation / retirement in GOOD CONDITION from a carpentry shop

Year of construction: 1991, condition: used, Volume: 15 hl Periphery: Pump Rcodpfx Agjw Tml Eo Ajh

Condition: used, Year of construction: 2022, Year of manufacture: 2022 Features and technical specifications: > Robust German engineering for jointing and planing, including concave and pointed joint adjustment for planing widths up to 510 mm and maximum cutting depth up to 8 mm > Ergonomic working position directly at the cutterhead > Panhans four-knife cutterhead with strip planer knives and setting device > Finely planed grey cast iron tables, total table length 2850 mm > Control panel positioned at eye level with digital display of cutting depth and current outfeed table status (neutral, concave, and pointed joint), including template holder and practical tool tray > Electromotive adjustment of the infeed table via push button > Concave and pointed joint adjustment at the outfeed table > Serrated table lips for noise reduction > Adjustable planer fence with depth and tilt adjustment via lever operation, tiltable up to 45° on extremely smooth steel guide > Anodized planer fence ruler > Swiveling auxiliary fence type 1545 > Console for power feed unit > TXF type 1570 bridge guard with fold-down cover Supplied with Suvamatic planer guard device, with 2-piece, fold-down cover and spring-loaded pressure instead of bridge guard TXF 1570 > Automatic motor brake > Automatic star-delta start, motor protection switch > Factory-set up Planing width: 510 mm Infeed table length: 1620 mm Outfeed table length: 1170 mm Rjdsw Tfxkjpfx Ag Ajch Total table length: 2850 mm Motor power: 5.5 kW / 7.5 HP Cutterhead speed: 5,000 rpm Extraction port: 160 mm Voltage: 400 V / 50 Hz Required space: 2850x1420 mm Color: Light Grey RAL 7034 and Violet Blue RAL 5000 Weight: approx. 1,050 kg Incl. solid steel Tersa cutterhead Location: Flörsheim Availability: Short notice

Condition: ready for operation (used), Immersion depth: 550 mm Delivery rate: 292 l / min Delivery head: 1 m WS Flange Ø: 140 mm Outlet connection: 5/4 " Speed: 2700 rpm electr. Connection: 400 V, 0.6 kW Total length: 800 mm Rcedjg Tcryjpfx Ag Aoh

Condition: used, Year of construction: 2008, functionality: fully functional, Well-maintained used machine from a screw factory - Horizontal end machining center for simultaneous double-sided end machining of shaft-shaped parts Redpfewt Upmex Ag Aoch For further information, please inquire.

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: YA-1MMR61, Equipment: type plate available, Used PANASONIC VR-006 welding robot, year of manufacture 2001, six axes, wrist payload 6 kg, 2 workstations Rcedpsxb Rthofx Ag Ash

Condition: good (used), total height: 350 mm, overall weight: 5,000 kg, total width: 1,500 mm, table height: 350 mm, total length: 4,200 mm, Used clamping table 4200 x 1500 x 350 mm Weight approx. 5000 kg Rsdpjuzaafjfx Ag Ajch

Condition: good (used), Jaw width: 250 mm Jaw height: 80 mm Rcedow Rfntopfx Ag Aeh Clamping width: 230 mm Dimensions (W x D x H) approx.: 1000/770 x 250 x 190 mm

Condition: used, Panasonic TOUGHBOOK S1 FZ-S1AELFAAS Rugged Android tablet S1, 2D, USB-C, BT, WLAN, 4G, NFC, GPS, Android, kit (USB), external battery Tablet PC, 2D imager, 17.8 cm (7'') GPS Camera (13 MP) + front camera (5 MP) Brightness: 500 cd USB-C Bluetooth, Wi-Fi (802.11ac) Audio, 4G (LTE) NFC Micro-SD slot Resolution: 1280 x 800 pixels Qualcomm Octa Core, 2.2 GHz, RAM: 4 GB, Flash: 64 GB Android (10) Protection rating: IP65, IP67 Standard USB-C to USB-C or USB-C to USB-A cable Rsdpfx Aew N Irrjg Aech Tiered pricing: 1 unit at 175.00 EUR 10 units at 150.00 EUR each 30 units at 135.00 EUR each

Condition: ready for operation (used), Immersion depth: 550 mm Delivery rate: 292 l / min Delivery head: 1 m WS Flange Ø: 140 mm Outlet connection: 5/4 " Speed: 2750 rpm Rcjdpjg Tcrrefx Ag Aeh electr. Connection: 345 - 420 V, 0.85 kW Total length: 800 mm

Condition: used, Year of construction: 1997, used, good condition Manufacturer: Spänex Model: SMU 4500 Year of Manufacture: 1997 Machine No.: 4500-97/59 Clean air unit / negative pressure GS dust tested CE type tested Motor: 5.5 kW Rsdpow U Emqofx Ag Aoch Connection diameter: 250 mm Pressure: 2400 Pa Air capacity: 4250/3530 m³/h nominal volume flow Discharge drums: 2 pcs of 230 l each Filter area: 22 m² Filter cleaning: automatic/pneumatic New price approx. EUR 15,000.00 Space required approx. 2070 mm x 900 mm x 1965 mm Weight approx. 600 kg Storage location: 97447 Gerolzhofen, loaded free, unpacked Sold in current condition as inspected, without guarantee or warranty

Year of construction: 2021, condition: as good as new (ex-display), Universal center lathe of the new generation with infinitely variable speed control (2 feed stages), V-constant capable (surcharge). Stable machine bed with hardened guides, one-piece cast-iron underframe, adjustable precision ball roller bearing in the main spindle, easy-to-operate feed gear, with large feed range, running in a closed oil bath. Low maintenance central lubrication. Infinitely variable speed control, toolmaker's accuracy DIN 8605. With removable bridge and digital display. Technical data: Headstock Center height: 205 mm Swing diameter - over bed: 410 mm - over support: 264 mm - in the crank: 533 mm spindle nose: DIN 55029-D 1/6 Camlock spindle bore: 52,5 mm spindle speeds: 20-2500 rpm. Speed steps: 2 Speed range 1: 20-400 rpm, infinitely variable Speed range 2: 400-2500 rpm, infinitely variable Motor power: 3,7 kW Bed center width: 1000 mm bed width: 260 mm Carriage / lock case Travel - cross slide travel: 220 mm - top slide travel: 130 mm Feed rates - longitudinal: 0.050 to 1.70 mm per revolution - transverse: 50% of the longitudinal feed Thread - metric: (39) 0.2-14 - Whitworth: (45) 2-72 - modulus: (18) 0.3-3.5 - DP: (21) 8-44 Tailstock: Morse taper in quill: MK 4 quill diameter: 52 mm Quill stroke: 152 mm Standard accessories: - digital speed display - linear speed increase for cross feed switchable - coolant system - 3-jaw precision lathe chuck, steel design, diameter 200 mm, direct mounting DIN 55029 with inner and outer jaws - Fixed steady rest with rollers - Moving steady rest - Multifix quick change tool holder "B - Micrometer bed longitudinal stop - Travelling center punch MK 4 - Chuck guard - Halogen illumination - 3-axis digital position indicator FAGOR for lathes with 3 axes "INNOVA 40i", professionally mounted consisting of: Counter, cable, 3 scales, swivel arm, mounting kit, cover plates. Axis presetting absolute/incremental operation as well as reference point search Resolution up to 0.1 µm Rcjdpfekx Hb Hox Ag Ash Signal and speed monitoring Coupling of 2 axes Computer function Easy setup and diagnostics. "Easy set-up" Energy saving mode PC communication via USB adapter "go to" function Axis feed display Graphic input help on the screen Up to 100 tool memories CE and UL marking Compact model with 7.5" TFT monitor - Digital display connection electrically integrated in the control cabinet - German operating instructions and spare parts list - CE conformity - Painting two colors: RAL 7032 grey / RAL 5012 blue

Condition: used, Panhans format saw Rjdjv Iqp Hjpfx Ag Asch 320cm carriage on bars up-down and angle saw adjustment hydraulically 5.5KW main engine undercutter on a separate engine 3 cutting speeds max. 400mm discs machine in good working order, ready for testing

Condition: ready for operation (used), Year of construction: 1992, PANHANS 259 Milling machine manual height and swivel adjustment electric speed display table size 760 x 1,100 mm swivel range -5° to + 45° spindle speed 3 / 4.5 / 6 / 9,000 rpm Milling arbor MK-5, D=30 mm Motor (pole-changing) 4.7 / 5.9 kW Suction nozzle below/above 2 x D=120 mm Cast table top extension on the left side incl. removable frame support 700 mm Milling fence with fine adjustment and metal jaws 3-roller feed HOLZ-HER Sliding table Rcedpfer Axuljx Ag Aoh Year of manufacture 1992 Condition checked for function price 5500.

Condition: excellent (used), -Dimensions LxWxH: 1020x960x710 mm -Serial number: 9687286 -Year: 1996 -Capacity: 50–3000 g -Maximum output: 2000 pcs/h -2 rollers -Voltage: 230/380 V -Power: 0.55 kW Rcjdpfx Aowx I E Eeg Aeh -Weight: 150 kg

Year of construction: 2017, condition: used, functionality: fully functional, II. TEMPERED GLASS STRESS MEASUREMENT DEVICE TYPE JF-1 (GLASS SURFACE STRESS METER TYPE JF-1). The JF-1 device is designed for quality control of tempered glass by means of non-invasive measurement of external surface stresses. The complete set includes: PDA display, optical head, power supply, UV sensor, refractive fluid, USB cable, reference sample, software, and user manual. Additionally, 50 ml of refractive fluid is included. Condition: used, functional. Rcsdpjw T Rq Ssfx Ag Ash

Condition: used, used extraction unit mobile extraction nozzle 120 mm motor 0.75 kW Rcsdsw I U Sispfx Ag Aoh 1180 Pa Availability: approx. end of May/beginning of June Stock location: Aschaffenburg

Condition: excellent (used), -Dimensions LxWxH: 693x560x1075 mm -Serial No.: 1459010 -Tank dimensions: 480x495x130 mm -Number of divisions: 20 -Tank capacity: 20 kg -Weight range: 200 g - 1 kg Rcodjwxmwyopfx Ag Aeh -Year: 03/2014 -NP: 6317720 -Power: 1.5 kW -Voltage: 400 V -Overhauled equipment: the equipment is prepared to order; collection and return times

Condition: used, Year of construction: 1987, Used machine Year of manufacture: 1987 Machine checked/overhauled in the workshop Table size: 1100 x 760 mm Motor: 4.7/5.7 kW, pole-changing Right/left rotation Mill arbor: MT 5/30 mm Height and tilt adjustment via handwheel Rcodpfx Aew I U U Djg Aoh Speeds: 3000/4500/6000/9000 rpm Mill arbor tilt range: -5 to +45° Mill attachment with metal jaws mounted on a round insert plate and thus rotatable 360° With table extensions on both sides with extendable frame support With 4-roller feeder Weight: approx. 900 kg Pictures show the machine in non-overhauled condition Availability: approx. 4 weeks after order placement Storage location: Florsheim

Condition: excellent (used), -Dimensions: 693x560x1075 mm -Tank dimensions: 480x480x130 mm -Tank capacity: 20 kg -Dosing: 200 g - 1 kg -Power: 1.5 kW -Voltage: 400 V -Weight: 196 kg Rcjdpewxmw Tjfx Ag Ash -Refurbished equipment: the equipment is prepared upon order, collection and return times are agreed at that time (please request price after refurbishmen

Condition: new, Year of construction: 2024, New machine Year of construction 2024 Technical data Table size 1100 x 760mm Table height 905mm Milling spindle 30mm with quick-release nut Clamping height 140mm Height adjustment 125mm Suction nozzle 2 x Ø 120mm Infinitely variable speed control 150010000 rpm Motor power 7.5 kW (10 HP) Net weight approx. 880kg Technical description 7" touch control, can be used optionally, top and bottom 7" capacitive touchscreen, can also be operated with gloves can also be operated with gloves (e.g. with Maxi Flex) Language switching German, English, French (other languages on request) Milling cutter zero point selectable in the program, 3 reference points Simple menu structure thanks to innovative touch control (max. 2 levels) Display (work screen) for tool and program number program number, height, angle, speed and milling fence Operating hours counter Warning messages in the event of incorrect operation Remote maintenance via Internet (VPN tunnel) Rjdpfow Naa Iex Ag Asch USB interface for data backup and importing Tool, program and user Tool database for 5 tools (20 programs possible per tool) 20 programs are possible per tool) Heavy-duty bench router with double-sided swivel-mounted, fixed built-in milling spindle for swivel range of +/- 45.5° 2-axis positioning control for height and tilt adjustment swivel adjustment Electronic position and speed displays Infinitely variable speed control 1500 10000 rpm 7.5 kW motor with 11 KW frequency converter Push button with electronic soft start Left and right rotation Milling cutter quick clamping device Finely planed gray cast iron table with rigid frame support Milling fence 301 Overall adjustment via 1 handwheel on the right-hand side, Adjustment range approx. 140 mm, dimension display, Total stop via touchscreen +/-0.1 mm, Partial stop adjustment, (chip removal) +5mm to -25mm is carried out via a star knob screw on the left side side, dimension display via one mm vernier, clamping on the machine table the machine table manually via clamping clamping screws, milling fence made of die-cast aluminum with 2 milled cast iron stop slats 500mm long with aluminum splitter tongues, maximum possible tool diameter is tool diameter is 250 mm Machine socket Lockable main switch Electronic, wear-free motor brake Milling protection and pressure device GAMMA V 1629 Arc milling fence 1639 Tapoa Milling spindle 30mm with quick-release nut CE-compliant incl. - Milling fence type 301 - Cast stop plates and aluminum splitter tongues - Milling protection and pressure device GAMMA V 1629 Table pusher for table top 1100 x 760 mm Coated surfaces, for quick, convenient and tool-free tool-free adjustment to different tool diameters tool diameters up to max. 240 mm, the table insert Table insert with quick lock up to tool diameter 155 mm instead of standard table insert rings (not in conjunction connection with rotary table) - Zeromaster reference measurement setting device for exact 0-point height adjustment from the milling tool to the table top for 24 V DC - HSK-80 quick-change arbor system with spindle lock and spindle lock and milling arbor 30mm instead of milling spindle 30mm (higher concentricity and no sticking in the spindle as with the spindle as with the MK 5 system or steep taper) - Console to the