Used Drilling Center for sale (17,324)

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Cjdpfxoxy Tmns Ailsgw

Condition: used, Year of construction: 2016, Working area: X=3300 mm Y=1280 mm Z=150 mm Clearance height Operator terminal: 24" LED colour display Handheld terminal for axis speed control Software: "Woodflash Vacuum pump 90 m³/h/50 Hz or 108 m³/h/60 Hz Milling spindle 12 kW HSK F63 (12,000 rpm) 12-position linear tool changer on the left of the machine frame + pickup station Drilling head DH 16 4H 2S: Vertical 12 spindles Horizontal 4 spindles 2 grooving saws Storage location: Nattheim Cgsdpfx Aoxy Tlwsilew

Year of construction: 2019, condition: excellent (used), SEMA-Maschinenbau Type MT-40-C Technology Drilling Year of manufacture: 2019 Control Unit Technical Specifications Control System - CNC control: SIEMENS 840 D SL Dimensions & Weight - Space required (left/right): 13,480 mm - Space required (front/rear): 10,502 mm - Total height: 4,532 mm - Total weight: approx. 23,000 kg Electrical connection data - Power consumption (total): 210 kW - Connection voltage: 400 V - Mains frequency: 50 Hz Basic machine with 11 stations 1. Station 1: Component loading with multi-axis handling. 2. Station 2: Crown turret *Sauter 112* (3 spindle units, HSK 40) with internal cooling (IKZ), max. speed 15,000 rpm. 3. Station 3: Crown turret *Sauter 112* (3 spindle units, HSK 40) with external cooling. - Additionally: 1 × 2-axis unit *SEMA AE2-35/50/NC*. 4. Station 4: 1 × SE-HSK 50C spindle unit with internal cooling, max. speed 15,000 rpm. Cgsdpswf R N Hjfx Ailjw 5. Station 5: 1 × Crown turret *Sauter 112* (3 spindle units, HSK 40) with internal cooling. 6. Station 6: 1 × Sauter 112 crown turret (3 spindle units, HSK 40) with internal coolant. - Additionally: 1 × SEMA AE1-35/50/NC 2-axis unit. 7. Station 7: Hydraulic docking unit including C-axis positioning unit. - Equipment: 7 × SEMA AE1-35/50/NC 2-axis units. 8. Station 8: Hydraulic docking unit including C-axis positioning. - Additionally: 1 × permanently integrated angle head. 9. Station 9: 1 × SEMA AE3-35/50/NC 2-axis unit. 10. Station 10: Permanently integrated angle head *Benz S-35/50/NC*. 11. Station 11: Cleaning unit for blowing off (inside/outside). --- Notes on structuring: - The information is grouped thematically (control, dimensions, electrical system, stations). - Technical details such as spindle types, cooling, and speeds have been listed precisely. - Models and manufacturers (Sauter, SEMA, Benz) are highlighted. - Stations 7 and 8 have been more clearly separated to avoid confusion. - Consistent formatting for better readability. Do you need further adjustments? 😊 Siemens Sinumerik NCU 730.3BPN 840DSI Electrical capacity 210 KW Availability date 05/2025 Weight 23 t

Condition: good (used), Year of construction: 2005, functionality: fully functional, Cotrol system Fanuc 21iB. Probe Marposs T36. X ... 1200 mm Y ... 600 mm Z ... 640 mm Table ... 1300x620 mm Max. table loading ... 800 kg Taper in spindle ... ISO 40 Spindle revolutions ... 50 - 8000 rpm Cedpsyk D R Tsfx Ailogw Number of tools in tool changer ... 24 ks Machine dimensions ... 2001 x 3641 x 3158 mm Weight ... 7000 kg

Condition: as good as new (ex-display), Year of construction: 2024, New and unused, 340mm turning diameter, 570mm turning length, Y axis +/- 41mm, 400mm swing, Csdpfxeziavhe Ailsgw 65mm bar capacity, spindle speed 4,500rpm, 15 station turret, 11/15kW spindle motor, milling 6000rpm, C axis 0.001 degrees, FANUC-i control, tailstock, coolant, tool setter, swarf conveyor, parts catcher, 3 jaw chuck, tooling,

Condition: excellent (used), FLEXIBLE C.N.C. WORKING CENTER 3 axes (X-Y-Z) Movable panel (workpiece), static working head - Horizontal position of the panel (workpiece) Numerical Control PC 85 (Software woodWOP) Cjdpfjziapbex Ailegw Safety cabin (enclosure) of the working head Separate electric and command cabinet - Total installed power (Kw) 20 (ca.) No. 2 Workpieces fixing clamps (for the panels introduction in the working area) In-feeding working table (panel support) Out-feeding table (with motorized belts) Minimum workpieces dimensions (X - Y - Z) mm 200 x 100 x 8 (2 x 4 mm) Maximum workpiece dimensions (X -Y- Z) mm 3000 x 1000 (option mm 1300) x 80 (2 x 40 mm) Two panels simultaneously processables (in Z axe) WORKING GROUPS (TOP): 2V32, 2H8X/Y2, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle ETP-25 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 32 Vertical drilling spindles (power Kw 2.7) No. 10 Horizontal drilling spindles (8 in X + 2 in Y) WORKING GROUPS (BOTTOM) No. 1 Vertical electro-spindle ETP-25 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 32 Vertical drilling spindles (power Kw 2.7) No. 10 Horizontal drilling spindles (8 in X + 2 in Y)

Condition: excellent (used), functionality: fully functional, Detel M-35 multi-spindle drilling machine Number of spindles: 35 Spindle spacing: 32 mm Distance between extreme spindles: 1088 mm Drilling depth: up to 90 mm Vertical and horizontal drilling capability 4 pneumatic material clamps Drilling speed adjustment Cgedszh U Hlepfx Ailjw Motor power: 2 x 1.4 kW

Condition: like new (used), Year of construction: 2015, operating hours: 26,915 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, nominal power (apparent): 30 kVA, controller manufacturer: M-730UM, workpiece weight (max.): 1,000 kg, total height: 2,800 mm, total length: 3,300 mm, total width: 3,000 mm, table width: 600 mm, table length: 1,100 mm, spindle speed (min.): 8,000 rpm, Year of construction: 2015 CNC controller: M-730UM Axes X-axis travel mm: 800 Y-axis travel mm: 530 Z-axis travel mm: 510 Distance spindle nose - table surface mm: 150-660 Feed rates m/min: 5 Rapid traverse m/min: 30 Worktable Number of pallets: 1 Table dimensions mm: 1100x600 Max. workpiece weight kg: 1000 Spindle Spindle speed rpm: 8000 Spindle drive power kW: 30/22 (25%ED/cont) Cedpfx Aexwxc Aeilogw Spindle torque Nm: 304 Tool system Tool holder: MAS-BT 50 Tool magazine slots: 30 With free neighboring places mm: 240 With occupied neighboring places mm: 120 Max. Tool Length mm: 350 Max tool weight kg: 20 Tool-to-tool time s: 2.34 Equipment Chip conveyor Internal cooling lubricant supply 4th axis DDRT-260X Custom Macro common variables (200) Machine running times Under power: 35896 Spindle Working: 26915 Rated power kVA: 52 Basic machine dimensions / weight Length mm: 3300 Width mm: 3000 Height mm: 2800 Weight kg: 6870

Condition: excellent (used), For sale: ZMM C8C lathe as shown in the photos, marketed under the Huvema brand for the Dutch market. The machine comes from a school workshop where it has been in operation since its production. The condition of the machine is very good. On-site loading of the machine is provided. Turning trials were performed using a VCGT insert with a radius of 0.2. 160 mm Bison chuck with split jaws Turning length: 750 mm Swing over bed: 320 mm Swing over cross slide: 190 mm Cgsdpfxoy Rq Uts Ailew Tailstock taper: MK3 Spindle speeds: 85–2000 RPM 12 spindle speed steps

Condition: new, bore capacity in steel St 60 30 mm bore capacity in cast iron GG 20 30 mm Cgodpfx Aisyvvn Njljw Drilling capacity in St 60 30 mm threading in St 60 M 16 threading in GG 20 M 20 Short spindle MK 3 spindle stroke 140 mm throat 293 mm column diameter 115 mm Machine table - usable table surface 514 x 360 mm T-Slots Amount - Width - Distance 2 x 14 x 224 mm Distance spindle-table min. 132 / 724 mm feed von Hand spindle turning speed - stepless 100 - 1.800 U/min total power requirement 1,0/1,6 kW weight of the machine ca. 260 kg

Condition: new, bore capacity in steel St 60 30 mm bore capacity in cast iron GG 20 30 mm Drilling capacity in St 60 30 mm threading in St 60 M 16 threading in GG 20 M 20 Short spindle MK 3 spindle stroke 140 mm throat 293 mm column diameter 115 mm Machine table - usable table surface 514 x 360 mm T-Slots Amount - Width - Distance 2 x 14 x 224 mm Cgedpfxeyvvmxs Ailew Distance spindle-table min. 132 / 724 mm feed von Hand spindle turning speed - stepless 225 - 4300 U/min total power requirement 1,0/1,6 kW weight of the machine ca. 260 kg

Condition: new, 40 mm threading in St 60 M24 threading in GG 20 M30 Short spindle MK 3 spindle turning speed - stepless 160 - 2250 U/min Center of spindle to wall or column 293 mm Column diameter 115 mm Codpfjyvvmrjx Ailsgw spindle stroke 120 mm Machine table - usable table surface 514 x 360 mm T-Slots Amount - Width - Distance 2 x 14 x 224 mm Distance spindle-table min. 117/701 mm feed 0,10 + 0,20 mm/U Motor output 1,45 / 1,9 kW height of the machine ca. 1840 mm weight of the machine ca. 285 kg

Condition: used, Year of construction: 1999, x-travel 630 (875) mm y-travel 500 mm z-travel 500 mm Control Heidenhain TNC 430 turning speeds 20-7.000 U/min feed 0-15.000 mm/min tool change unit 16-fach rapid power traverse in X-and Z direction 15 m/min tool taper SK 40 table surface area 900 x 528 mm max. table load 400 kg spindle diameter in front bearing 55 mm swivellable 0-90 ° quill stroke 75 mm spindle hours 9.546 h Cgedpfozh N T Hex Ailew total power requirement 12/7,5 kW weight of the machine ca. 4,8 t dimensions of the machine ca. 4 x 3,6 x 2,2 m HERMLE U 630T 3-axis machining centre, built in 1999 The X-axis, with a stroke of 630 mm, can be extended to 875 mm by swivelling the tool changer out of the way. Accessories: Tool holders, see pictures

Condition: used, Year of construction: 2008, turning diameter over bed 280 mm Turning diameter over slide 170 mm centre height 220 mm centre distance 1600 mm Cgjdpfx Aszh N Uqsilew Spindle Speed 25-1320 UpM spindle bore 75 mm tailstock quill taper MT 4 weight of the machine ca. 2025 kg

Condition: used, Year of construction: 2008, bore capacity in steel (diameter) 32 mm throat 232 mm bore stroke 150 mm Cgsdpfx Aeyv N Dqjilsw Spindle Speed 115 - 2470 U/min. tool adaptor MK 3 weight of the machine ca. 280 kg dimensions of the machine ca. 500 x 950 x 1800 mm

Condition: used, Year of construction: 1999, Technical details: Cgodpfxszh Nlie Ailjw total power requirement: 2.2 kW bore spindle turning speed range: 70-4000 in 4 stufen U/min

Condition: excellent (used), Mazak Quickturn Nexus 300 CNC Lathe Capacity Maximum bar size diameter - 77mm Maximum cutting dia - 420mm Maximum swing - 680mm Spindle Main spindle speed : Max 4,000rpm / Min 35rpm Main spindle workpiece weight ( including chuck) 450kg Spindle bore - 88mm Spindle centre line - 1080mm Spinel nose - A2-8 Axis Travel X axis 225mm Z axis 680mm Cutting feedrates (x axis max) 8m/min (z axis max ) 8m/min Rapid traverse X axis (max) 30m/min Z axis (max) 25m/min Csdpfezh Ndxox Ailsgw Turret Toolsize turning tool shank - 25 x 25 Turret indexing time 1/2 full turn 0.8 secs single step 0.2 secs No of stations on drum turret 12 Tailstock (not chucker) Body movement motor driven Body stroke 645mm Mounting taper No5 Standard centre supplied No5 Chucking systems Chuck cylinder S2078-15Y Chuck Type B210A815X Jaw stroke on diameter 8.8mm Main chuck diameter 10" Mazatrol PC Fusion CNC 640T Nexus CNC Control

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 1067mm x 610mm x 610mm, Table size 1270mm x 610mm, 600mm C axis Table (360 degrees) +/- 90-degree head (B axis), 37kW Spindle Motor, Cgsdozh Nczspfx Ailew 40 station side arm ATC, din 40 spindle taper, 12,000rpm spindle, Hurco Winmax 5 control, through spindle coolant, swarf conveyor, spindle probe.

Condition: good (used), Year of construction: 2018, Traverses X Y Z: 1,525 x 660 x 610mm, Table 1675 x 660mm, table load 2,000 kgs, Spindle speed 12,000 rpm, input 18Kw, Cgjdpjzh I Ebsfx Ailsw Hurco Winmax 5Control, Spindle taper Din 40, 30 ATC, Coolant, Low volt light, Swarf Conveyor, spindle probe

Condition: like new (used), Year of construction: 2023, operating hours: 100 h, functionality: fully functional, OKUMA MU-6300V (2023.11) – Technical Specifications Model: MU-6300V Simultaneous 5-axis Vertical Machining Center Water-soluble coolant CNC Control: OSP-P500M Display language: Korean Power supply: 220V / 60Hz Operating voltage: 100V CE + EMC compliant Axis Travels X-axis: 925 mm Y-axis: 1,150 mm Z-axis: 600 mm A-axis: +90° / −120° C-axis: 360° continuous Simultaneous 5-axis machining Feed Rates Rapid traverse (X/Y/Z): 50 m/min Cutting feed: 50 m/min Cedpfxszhgh Is Ailegw A-axis rapid speed: 10,800°/min C-axis rapid speed: 32,400°/min Table diameter: Ø630 mm Table configuration: 6 radial T-slots (18H7) Spindle taper: BT40 (MAS BT40) BIG PLUS dual-contact spindle Spindle speed: 50–15,000 rpm Main motor: 22 kW (10 min) / 18.5 kW (continuous) Spindle oil cooling TAS-S spindle thermal compensation TAS-C ambient thermal compensation Tool Magazine 32-tool Automatic Tool Changer (ATC) Air blow for ATC Taper cleaning air blow Standard tool release system JIS pull studs Measuring System Absolute linear scales on X/Y/Z axes Renishaw TS27R automatic tool setter and tool breakage detection Renishaw RMP60 wireless workpiece probing system Calibration reference tool included Manual measurement function 5-Axis Functions Tool Center Point Control II (TCP/RTCP) Hyper-Surface II Slope Machining Function Inverse Time Feed Manual Tool Center Point Transfer Table Coordinate System Transfer DNC-DT Accuracy & Compensation Five Tuning Kit Geometric error measurement Geometric error compensation Straightness compensation Dynamic displacement compensation Coolant System Through-Spindle Coolant (TSC): 1.5 MPa Through-spindle air blow Standard coolant pump: 390 W Wash-down pump: 800 W Through coolant pump: 1.1 kW Cyclone + sintered bag filtration system Chip Handling Floor-type hinge chip conveyor Conveyor height: 750 mm Right-side chip discharge Safety & Protection Full enclosure with roof Y-axis guide cover CE-compliant door interlock CE + EMC export specification 220–480V transformer KCS machine nameplate Operator Interface 21.5-inch adjustable OSP control panel Smart OSP Servo Navigation AI Servo Navigation SF ECO Suite Plus ECO Power Monitor OSP Software Features 4 GB program storage 10 MB operation buffer 999 tool offsets 200 work coordinate systems Tool Life Management Tool Wear Compensation Real 3D Simulation NC Operating Monitor Simple Load Monitor Tool Damage Detection Programmable Messages Programmable Mirror Image Program Stroke Limit Automatic Program Update Automatic Power-Off Function Digital Twin Functions Digital Twin DMC Kit Hyper Simulation Quick Modelling Interactive MAP (I-MAP) OPC UA for Machine Tools Additional Equipment LED work lights Three-color status indicator Mist collector connection (Ø150 mm) Virus protection system

Condition: good (used), Year of construction: 2019, Traverses X Y Z 762 x 508 x 520mm, A axis 30/110 degrees, C axis 360 degrees, table size 250mm diameter, table load 200kgs, spindle speed 12,000 rpm, spindle taper Din 40, 40 station ATC, Cgjdpfxjzh I Age Ailjw WinMax 5 control, through spindle coolant, swarf conveyor.

Condition: new, CATALOG NUMBER: M0261 TECHNICAL DATA Number of spindles: 21 Distance between first and last drill: 640 mm Distance between spindle centers: 32 mm Max. workpiece size: 50 x 915 x 3000 mm Max. drilling depth: 65 mm Number of pneumatic clamps: 2 Cgsdpfx Aiezh Ikkslsw Working table height: 860 mm Max. clamp height above table: 70 mm Working pressure: 6-7 bar Air consumption: 10 l/cycle Motor power: 1.5 kW Noise level: 76.1 dB Spindle speed: 2800 rpm Dimensions (L/W/H): 1030/1030/1285 mm Weight: 275 kg PRODUCT FEATURES Main machine features: - Single-head boring machine, drilling range 0 - 90 ° - Pneumatically adjustable head inclination angle - Cast iron fences - Spindles adapted for quick-connect couplings - Patented pneumatic workpiece clamps - Cast iron work table - Fast and precise adjustment - Accurate drilling - Made in Italy Standard equipment: - 2 aluminum rulers, 1.5 m each (right and left) with two stops - 5 quick couplings - Wooden box for secure transport of the machine ADVANTAGES - Drilling vertically, horizontally, or at an angle - Multi-spindle - Brand new machine - CE certified - Robust and professional Net price: 13,800 PLN Net price: 3,330 EUR Net price calculated at an exchange rate of 4.15 PLN/EUR (prices may vary in case of significant exchange rate fluctuations) - We ship machines to every part of the country - Possibility to trade in another machine as part payment The prices provided are net prices. Net price applies to international transactions and EU customers with a valid EU VAT number. Before placing an order for a new product, please confirm availability and current price.

Condition: as good as new (ex-display), 21-spindle single-head drilling machine, suitable for all carpentry needs, ideal for joining a work center to save time and release it from horizontal drilling operations. PNEUMATIC HEAD ROTATION - with lock and stop reference from 0° to 90°at any angle. SIDE REFERENCE FENCES - Adjustable cast iron fences on a metric scale thanks to a magnify glass and nonius. PATENTED SPIRAL SYSTEM - Device for boring depth adjustment, allowing an easy and quick set-up on a millimetric scale according to the different drill lengths. no of drilling spindles 21 # distance between drilling spindles 32 mm working width 640 mm max drilling depth 65 mm no. of pneumatic work piece clamps 2 # work piece dimensions max 900 x 3000 x 60 mm motor 1,5 kWm 50 Hz, 400 V, 2800 rpm pneumatic pressure requirement 6-8 bar compressed air consumption 10 l/cycle suction DM 80 mm machine dimensions L x W x H = 1030 x 1030 x 1285 mm Cgedpjd Supgofx Ailjw weight 240 Kg

Condition: excellent (used), C.N.C. WORKING CENTER 3 axes (X-Y-Z) Vertical position of the panel (workpiece) Movable panel (workpiece), movable working head Numerical Control POWERCONTROL + POWERTOUCH Software woodWOP Safety cabin (enclosure) of the working head No. 1 Workpieces fixing clamps (for the panels introduction in the working area Panels feeding by motorized chain/track Minimum workpieces dimensions (X - Y - Z) mm 200 x 70 x 8 Maximum workpieces dimensions (X - Y - Z) mm 3050 x 850 x 56 Total installed power (Kw) 11,5 (ca.) WORKING GROUPS: Cgedpoyywcvofx Ailsw No. 1 Drilling head (power Kw 2.3) with vertical spindles - No. 13 Independent vertical boring spindles (V13 High Speed) - No. 6 Independent horizontal boring spindles (4 in X + 2 in Y) No. 1 Circular Grooving Saw (on X axis) dia. (mm) 100 No. 1 Vertical electro-spindle (HKS63) power Kw 5 Automatic Tools Changing System - Tools storage plate (No. 4 folds-positions)

Condition: excellent (used), CATALOG NUMBER 6059 TECHNICAL DATA - Number of horizontal spindles: 2×20 pcs - Number of vertical spindles: 1×20 pcs - Distance between the outermost spindles: 610 mm - Distance between spindles: 32 mm - Feed cylinder stroke: 60 mm - Max length of workpiece: 3400 mm - Horizontal spindle adjustment: up/down, front/back - Vertical spindle adjustment: right/left - Each drilling unit can operate independently Cgsdpfx Aiezh H Dislow - Right/left drill bits, threaded mounting (screw-in) - 3 pneumatic clamps - Motor power: 4×1.85 kW - Air requirement: 6-8 bar - Dimensions (L/W/H): 4600x1180x2200 mm - Weight: approx. 1500 kg Net price: PLN 12,900 Net price: EUR 3,070 depending on exchange rate, reference 4.2 EUR (Prices may vary depending on exchange rate fluctuations)