Used Drilling Center for sale (17,269)

Condition: like new (used), Gillardon column drilling machine type GB 30 V, speed 60-1800 rpm, automatic feed, very good condition Itsdpfexpxbcsx Afijn

Condition: good (used), Year of construction: 2012, X Y Z: 1270 x 508 x 508mm, table 1324 x 457mm, 12000 rpm, Iedoxpw Rvopfx Afijtn BT 40, HAAS Control, 24 Station ATC, 40HP, chip auger, coolant, Haas TR210 5 axis trunnion table

Condition: like new (used), Year of construction: 2016, operating hours: 9,018 h, functionality: fully functional, turning length: 500 mm, turning diameter over cross slide: 290 mm, turning diameter: 240 mm, spindle speed (max.): 6,000 rpm, spindle bore: 73 mm, travel distance X-axis: 210 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 525 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 23 m/min, rapid traverse Z-axis: 30 m/min, spindle nose: 140h5, overall weight: 4,300 kg, Equipment: documentation/manual, rotational speed infinitely variable, This DMG MORI CTX alpha 500 V6 is in excellent condition and shows 9,018 spindle hours. The machine is very comprehensively equipped and was recently professionally cleaned. This CTX alpha 500 is fitted with: - Main spindle with HAINBUCH TOPlus mini Axzug 65 chuck. - Sub-spindle with HAINBUCH TOPlus Kombi Axfix 65 chuck. - LNS Quick Load Servo III bar feeder. - DMG CELOS software. Itedpfx Aoxpwyqofisn - Chip conveyor. - Workpiece catcher/discharge unit. - Tool measuring arm. - Double foot pedal for clamping/unclamping both main and sub spindle. - Various tooling (driven & static). - Various HAINBUCH collets and clamping jaws. - Rinsing gun. - All original documentation (NL+DE).

Condition: good (used), Year of construction: 2007, Column drilling machine Manufacturer: OPTIMUM Model: SB 23 PRO Year of manufacture: 2007 Drilling capacity in steel: 25 mm Spindle taper: MK 2 Connection: 400 V 50 Hz 750 W Depth stop: 100 mm Table with 4 T-slots and coolant channel Base plate with 2 clamping devices Itjdpfxexpwnhs Afijn

Condition: good (used), Year of construction: 2011, Technical details are attached as document. Ijdjxpwn Ispfx Afijtn Machine produced only plastic parts.

Condition: good (used), Year of construction: 2012, operating hours: 52,789 h, functionality: fully functional, Deckel Maho DMG DMF 360 linear, year of manufacture 2012, 3D control Heidenhain iTNC 530, x = 3600 mm, y = 1100 mm, z = 900 mm Itjdpsxpv I Hjfx Afisn

Condition: used, Year of construction: 2011, Technical details X travel: 660 mm Y travel: 355 mm Z travel: 455 mm Control: WinMax Main spindle: Max. speed: 10,000 rpm Main spindle drive power: 11 kW Tool holder: SK 40 Work table: Table clamping surface: 760 x 355 mm Tool changer: Number of tool positions: 20 pcs. Tool holder: SK 40 Total power requirement: 14 kW Machine weight: approx. 3.5 t Space requirements: approx. 3.5 x 3.0 x 2.6 m Chip conveyor (screw type) Itjdpfx Afjxpwy Dsijn

Condition: new, Year of construction: 2024, NEW FLOTT SB 25 plus pillar drill - Thread cutting device - Control panel with OLED display - LED lighting - Quickly adjustable and ergonomic drilling depth stop - Stepless speed control via central rotary knob - Thermal overload protection - Spindle stop - Drilling protection with electrical fuse - Continuous/normal drilling capacity (mm): 23/25 - Thread cutting capacity (depending on pitch): M16x1 - Spindle: MK III - Drilling depth (mm): 115 - Projection (mm): 260 - Usable work surface (W x L) (mm): 420 x 340 - Table height adjustment with rack - Spindle speeds continuously variable (1/min): 20 – 2000 - Dimensions (mm): 430 x 715 x 1800 For further TECHNICAL DATA, please refer to the product sheet! OPTION drilling package 4 (296593) - € 595.00 - Vice [felix] 2.0 120 - Keyless drill chuck B18 3-16 mm (accuracy 0.17 mm) - Taper mandrel B18/MK III - Reducing sleeve MK III/MK II - Reducing sleeve MK III/MK I 3 year guarantee for single-shift operation Iedpof S Tfnjfx Afistn Delivery: free of charge including packaging (Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 1,250 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 685 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 15 m/min, overall weight: 8,000 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 21, SIGMA VERTICAL MACHINING CENTER MODEL MISSION 5 X-AXIS STROKE 1250 Y-AXIS STROKE 600 Z-AXIS STROKE 685 Itodpfxjwq Snzs Afijn TOOL CHANGE 21 PLACES ISO 40 SPINDLE SPINDLE ROTATION SPEED 12,000 RPM CHIP CONVEYOR HIGH PRESSURE THROUGH SPINDLE FANUC 18 M CNC FANUC MOTORS AND DRIVES COMPLETE WITH MANUALS

Condition: excellent (used), Year of construction: 2014, CNC Heidenhain iTNC 530 Electronic handwheel Milling head 13,000 spindle hours Speed: 20 – 14,000 rpm Itedpfxsxbyrmj Afijn Motor power: 18.9 kW Tool holder: SK40 Continuous feed rate up to 20,000 mm/min Clamping table: 2100 x 700 mm Max. table load: 1,500 kg X axis: 1,800 mm Y axis: 700 mm Z axis: 700 mm Tool magazine capacity: 30 positions Max. tool in magazine: length 300 mm, Ø130 mm Through-spindle coolant Chip conveyor: 5,890 x 1,030 x h1,550 mm, weight 770 kg Tool set: 25 pcs BLUM tool probe Complete documentation Transport dimensions: 3,423 x 7,060 x h2,622 mm Weight: 12,380 kg Videos available.

Condition: excellent (used), With sub-spindle With C-axis, with Y-axis Iodpfx Afoxpugbjietn MAZAK Mazatrol Nexus control Turning length -538 mm Swing Diameter -675 mm Turning diametre 380 mm Spindle speeds 35- 5'000 + 35- 6'000 rpm Tool changer with 16 driven positions Bar loader Tool presetter device Piece catcher attachment Misc. accessories MARCELS MASCHINEN CH

Condition: used, Year of construction: 2007, Working area: 2780 x 1140 mm (vertical milling) 2500 x 950 mm (horizontal drilling) X-Y travel: 2980 x 1271 mm Z-axis travel: 200 mm Passage height: 180 mm The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. On this mobile unit carrier, the working unit is mounted on prismatic, ground guides and the recirculating ball slide. Description of the units and accessories (basic) Drilling unit: Drilling head with 10 + 4 spindles · 6 individually accessible vertical spindles in X · 4 individually accessible vertical spindles in Y · 2 horizontal spindles in X (1 + 1) · 2 horizontal spindles in Y (1 + 1) · Speed: 4,000 rpm · Power: 2.2 kW · Grid: 32 mm · Drill chuck: M 10 with 11 mm fitting · Extraction nozzle: D = 160 mm Vertical milling unit (position 2) · Tool chuck HSK 63F · Speed 1,500 - 24,000 rpm continuously adjustable via inverter · Motor power 4.4 kW (6 HP) from 12,000 rpm (S1) · Right-hand / left-hand rotation · Ceramic bearings · Scope of delivery: 4 tool chucks (right) without collet chuck · Tool changer · Side-mounted tool magazine 7-way (TR7) with full encapsulation to prevent chipping · 7 tool positions for HSK 63F tool holder arranged in a row · maximum tool diameter D=120 mm · maximum weight per holder 4.5 kg · maximum tool weight of all tools 20 kg (TR7) · angular gears can be accommodated Horizontal milling unit (position 1) Horizontal unit with two opposite outputs for milling and grooving. · Speed 9,000 - 18,000 rpm continuously variable via inverter · 1 output for collet 3-20 mm (ER 32) · 1 output for saw/collet 3-12 mm (ER20) (For saw D = 120 mm / bore 50 mm) · Motor power 3 kW (4 HP) · Max. tool diameter front milling: 20 mm · Max. tool length front milling: 110 mm · Max. tool diameter rear milling: 12 mm · Max. tool length rear milling: 80 mm · Max. saw blade diameter: 100 mm · Bore saw blade (ER 32): 50 mm · Mandrel diameter saw blade (ER 20): 12 mm Work table The work table is designed to guarantee the operator maximum freedom of movement. The vacuum quick clamping system ensures maximum flexibility with precise positioning and optimal grip of the workpieces. · 4 supports 900 mm continuously adjustable in X · 8 vacuum suction cups round D = 110 mm continuously adjustable in Y (2 per support) · 2 stops in X (1 x left / 1 x right) · 1 stop in Y per support (total 6) · The retractable reference stops are controlled via CNC. · Scope of delivery: 4 plug-on adapters for suction cups · Pendulum machining standard (2 working areas) Axis movement The drive system in X, Y and Z is carried out via ground ball screws of the highest precision class. The ball drive screw of the X-axis is located exactly in the center Itjdew Aifzepfx Afisn

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, spindle speed (max.): 18,000 rpm, 5-Axis Machining Center Manufacturer: Hermle Model: C20U Year of Manufacture: 2008 Control: Heidenhain iTNC-530 Power-on hours: approx. 35,000 h Program run time: approx. 14,500 h Itjdpfx Afexphursien S/N: XXXXX Technical Specifications: ----- • Travel range X-Y-Z: 600 x 450 x 450 mm • C-axis: 360° • A-axis: +/-115° • Swivel rotary table Ø280 mm • Spindle: 18,000 rpm • Magazine: 30x HSK-A63 • Standard coolant system • Blowing air through spindle + blow-off device • 3D probe Renishaw • Blum laser for tool breakage detection and measurement • Electrical thermal compensation • Increased accuracy in X-Y-Z-A-C axes • Option: KinematicOpt • Chip tray Accessories: ----- • Documentation • Rinsing gun • Handwheel

Condition: used, Diamond core drilling machine, drill, REMS Picus S1 Basic-Pack electric diamond core drill + REMS Simplex 2 drill stand, Used machine Manufacturer: Rems Type: Picus S1 Overall dimensions: Width: 670 mm Depth: 260 mm Height: 160 mm REMS Picus S1 Basic-Pack Motor: 1850 W universal motor Speed (under load): ~ 580 rpm Max. drilling diameter in reinforced concrete: Ø 102 mm (up to Ø 132 mm under certain conditions) Max. drilling diameter in brick / masonry: Ø 162 mm Isdpfxexpqvrj Afietn Drilling depth: up to 420 mm Weight: approx. 5.2 kg Connections & accessories: Drill bit connection: UNC 1¼ external thread, G ½ internal (water connection) Water supply unit with shut-off valve, quick coupling, and water stop function Multifunctional electronics: soft start, overload protection, idle speed limiter, blockage protection Safety slip clutch REMS Simplex 2 Drill Stand Suitable for core drilling up to Ø 200 mm Drill column: precision, square steel profile Ø 50 mm Adjustable for floor unevenness: 4 screws for correction Slide guide: adjustable on all sides, with preloaded plastic bearings Drive: rack-and-pinion system with ratchet lever operation Clamp and collar for Ø 60 mm gearbox mounting Integrated spirit level, with slide lock for easier adjustment and transport Weight: approx. 12 kg

Condition: good (used), functionality: fully functional, Data : Continuous drilling capacity in ST 60 30 mm 12 speed levels 60 - 2240 rpm Spindle motor 1.1 / 1.6 kW . Itedpfx Afsxpqwcjisn Projection approx. 320 mm Spindle stroke 170 mm Column diameter approx. 120 mm .

Condition: good (used), Year of construction: 2019, operating hours: 1,994 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Fanuc, controller model: Fanuc 31i-B, spindle speed (max.): 10,000 rpm, number of spindles: 1, mount diameter: 100 mm, Operating hours: 7194 / usage time: 1994 Ijdpfxsvvmnuj Afijtn Year of construction: 2019 Control unit: Fanuc 31i-B Spindle: PC100i (10.000 1/min) Tool clamping system: HSK 100 Tool magazine / places (Options): Chain/50 Rotary table: 360.000° X 0,001° Coolant unit: KNOLL, KF 400, IKZ 70 bar Positioning range XYZ (mm): 1000 / 1000 / 1000 Pallet size (mm): 630 X 630 Workpiece clamping: Hydraulic 80 bar Additonal options, Specifics: HELLER facing slide unit; Receiver for measuring probe (RENISHAW); Coolant temperature control; forward looking collision avoidance; Interface for exhaust system; 3 colour status lamp; work area flush; Scraping conveyor for wet machining; Fast drill fracture sensing (SBBK); multi-spindle-head support (MSK); Thermal growth compensation; Feed force display; Automatic loading sequence; Automatic unloading sequence; increased tool weight 35kg; tool codechip; Since response emails from Maschinensucher often end up in the spam folder, we kindly ask you to regularly check this folder or contact us directly.

Condition: excellent (used), Working travels 700 x 420 x 610 mm Table size 1260 x 490 mm Spindle taper HSK E50 Spindle speeds 50-36'000 U/min Tool changer 42 Pos. Control HEIDENHAIN iTNC 530 3D measuring tracer Itsdpfsxpud Hox Afijn Tool breakage control Tool length and diameter measuring device MARCELS MASCHINEN CH

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Condition: Good (Currently still in production) Equipment and technical data: - Base machine 7018 - Machine table 320 with 6 consoles, pneumatically clamped, movable in X-direction - Drilling unit 7884, 14 spindles / 10 vertical spindles individually selectable - Integrated saw unit for cutting / grooving in X-direction - Milling unit 7830, 1-stage, power: 8/10.3 kW, HSK air-cooled, n(max) = 1,000 - 24,000 min⁻¹, infinitely variable - Vector axis (C-axis) / fully interpolating, 0° - 360°, infinitely rotatable - Tool changer 7996 / 12-place rotary changer, automatic travel in X-direction - Vacuum pump 100 m³/h, dry-running - Hand-held control device - Safety equipment: bumper - Positioning lasers 2 pcs. - Automatic central lubrication - 4 pneumatic lifting and lowering loading aids Itedpfx Asxppwhefisn - Campus V6 software Processing dimensions for milling: X = 3,450 mm Y = 1,287 mm (minus cutter radius) Z = 180 mm Total length: 6,720 mm Total width: 3,930 mm Total height: 2,471 mm Weight: 3,500 kg Location: NRW Availability: Approx. January 2026

Condition: excellent (used), Year of construction: 2022, axis stroke (X,Y,Z) 1800 x 900 mm Number of spindle head vertical 1 St. Number of spindles head horizontal 0 St. Itjdpfx Afjvnwcgsisn Dust suction hood 100 mm Number of milling agregates 1 St. working dimensions 1800 x 900 mm Year 2022 total power requirement 2,8 kw Dimensions (L/W/H) 2400 x 1400 x 1900 mm Motor output 2,2 kW Capacity 100 m³/h kg/h

Condition: used, machine/vehicle number: 007665, Position 1: Automatic Drilling Machine WEEKE-BST 503 + BST 507 Itjdpewuz Dgsfx Afijn Position 2: Automatic Drilling Machine WEEKE-BST 503 + BST 507

Condition: used, Year of construction: 2013, Control Heidenhain iT Plus Dimensions (L x W x H) 6,55 x 3,46 x 2,40 m weight of the machine 14.500 kg CNC Turning- and Milling Center | DMG GILDEMEISTER - CTX 310 Itodpfx Aexpizgjfion Additional equipment: - C-Axis The machine is in good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: CTX310 | CTX-310

Condition: good (used), Year of construction: 2020, operating hours: 5,800 h, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,100 mm, torque: 1,146 Nm, controller manufacturer: Siemens, controller model: 840D SL, workpiece height (max.): 1,400 mm, workpiece weight (max.): 2,000 kg, rotational speed (max.): 8,000 rpm, Machine name / type: HELLER / H 8000 Itjdpfx Asu Urgbsfion Operating hours: 5800 Year of construction: 2020 Control unit: Siemens 840D SL Spindle: EPC-Unit (8.000 1/min, 60 kW, 1146 Nm) Tool clamping system: SK 50 Tool magazine / places: Rack / 265 Rotary table: 360.000° X 0,001° Coolant unit: KNOLL, KF 600, IKZ 70 bar, (work area flushing) Positioning range XYZ (mm): 1250 / 1200 / 1100 Pallet size (mm): 800 X 800 Workpiece clamping: mechanical Additonal options / Specifics: multi-spindle-head support (MSK); receiver for measuring probe (RENISHAW); fast drill fracture sensing (SBBK); interface exhaust system; screen blow-off device for operator door; codechip; Chip conveyor function check; Integrated process monitoring (IPM) + Monitoring function to minimize machine damage in case of collision; 3 colour status lamp; increased tool weight 35kg; scraping conveyor for wet machining; Coolant temperature control; Feed force display; Tangential control;

Condition: used, Year of construction: 2016, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 330 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: 840D, workpiece height (max.): 370 mm, table width: 320 mm, table length: 320 mm, table load: 300 kg, rotational speed (min.): 80 rpm, rotational speed (max.): 80 rpm, overall weight: 9,000 kg, spindle speed (min.): 15,000 rpm, spindle speed (max.): 15,000 rpm, spindle motor power: 31 W, spindle nose: HSK 63A, tool length: 250 mm, tool diameter: 125 mm, tool weight: 8 g, control type: CNC control, Equipment: chip conveyor, Hermle C22U 5 Axis Machining Centre Siemens 840D Control 5 Axis Simultaneous XYZ: 450 x 600 x 330mm 320mm diameter table Maximum workpiece diameter 320mm maximum workpiece height 265mm Maximum table load 300Kg A axis -/+ 135 degrees spindle speed 15,000rpm 55 station tool changer Swarf Conveyor Iedjxpil Sopfx Afiotn Coolant Tool Setter Spindle Probe

Condition: used, Year of construction: 2005, Used machine Year of manufacture: 2005 Technical data: - Base machine 555 - Workpiece support with 8 consoles, pneumatically clamped - Drilling unit 7968, 18 vertical drilling spindles with 32 mm pitch, individually selectable, arranged in T-shape: 12 on X-axis and 6 on Y-axis, max. drilling diameter 35 mm (depending on panel thickness), spindle stroke: 70 mm, rotation direction: alternating right/left, speed n = 4725 rpm, infinitely adjustable, 2 horizontal drilling units in X-direction, 1 horizontal drilling unit in Y-direction - Saw unit 7946, 3.5 kW, 90° pneumatically tiltable, n = 5300 rpm, tool holder A Ø = 200 mm, I Ø = 30 mm, B = max. 3.5 mm, sawing / grooving in both X and Y directions - Milling unit 7935 with 6 kW spindle, water-cooled - Milling unit 7982 for lock case milling - Tool changer 7996, 18-position magazine (carousel) - Vacuum pump with 140 m³/h - Hand control device - PC control with TwinCAM WOP system - Siemens control system Availability: short-term Iedpfx Aowlwn Nofijtn Location: Poland

Condition: excellent (used), Year of construction: 2003, Model: G50 x 1600 Year: 2003 Radius of Arm: 1600mm Spindle Taper: MT5 Spindle Speeds: 25 – 2000 RPM Iedpfxjxphw Tj Afietn Max. drilling capacity: 75mm iron / 50mm steel