Used Dressing for sale (390)

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: IRB2600ID-15/1.85 IRC5 (RW6), load capacity: 15 kg, arm reach: 1,850 mm, controller manufacturer: ABB, controller model: IRC5, teach pendant manufacturer: ABB, Equipment: documentation/manual, IRS Robotics® Refurbished industrial robot. Kedpfx Ahowr Ei Usvolp 100% complete and fully functional: robot arm, controller, all cabling and teach pendant. Includes our warranty and a detailed 77-Point Protocol evaluation performed by our in-house robotics engineers. Brand: ABB Type: IRB2600ID-15/1.85 Controller: IRC5 (RW6) Payload: 15 kg Reach: 1850 mm Featuring a unique combination of high payload capacity, large working range, and Integrated Dressing (ID), which routes all cables and hoses inside the robot’s upper arm and wrist. IRS Robotics® refurbished: 77-Point Protocol – fully tested on our test benches, new oil/grease, new batteries, fully cleaned, painted in your desired RAL colour. Includes Accuracy Status Measurements (repeatability, accuracy, backlash) About: Our daily trustful business is delivery of refurbished A-Brand robots: ABB – KUKA – ABB – YASKAWA. Est. 2002. We ship worldwide.

Condition: reconditioned (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: M-10iA R-30iA Mate, load capacity: 10 kg, arm reach: 1,420 mm, controller manufacturer: Fanuc, controller model: R-30iA, teach pendant manufacturer: Fanuc, IRS Robotics® Refurbished Industrial Robot. 100% complete and fully functional: robot arm, controller, all cabling, and teach pendant. Includes our warranty and a detailed 77-point inspection protocol performed by our in-house robotics engineers. Brand: FANUC Model: M-10iA Controller: R-30iA Mate Payload: 10 kg Reach: 1420 mm Robot mass: 130 kg This compact yet powerful robot weighs only 130 kg, but offers a 10 kg payload with the highest wrist moments and inertia in its class. Cable and airline dress-out and routing are greatly simplified thanks to the 50mm hollow wrist and upper arm, reducing system costs and enhancing reliability. The M-10iA can be installed on the floor, wall (at any angle), or ceiling. The J3 axis can flip over, enabling the robot to operate behind itself and thus greatly expanding its work envelope. Delivery time: To be agreed upon mutually. IRS Robotics® Refurbished: - 77-Point Protocol: fully tested on our test benches, new oil/grease, new batteries, thoroughly cleaned, painted in your preferred RAL colour. - Includes accuracy status measurements (repeatability, accuracy, backlash). Klodpfxswku Htj Ahvop About us: Our daily business is the reliable supply of refurbished premium-brand robots: ABB – KUKA – FANUC – YASKAWA. Established 2002. Worldwide shipping.

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: IRB1660ID-6/1.55 IRC5 (RW6), load capacity: 6 kg, arm reach: 1,550 mm, controller manufacturer: ABB, controller model: IRC5, teach pendant manufacturer: ABB, Equipment: documentation/manual, IRS Robotics® Refurbished Industrial Robot. 100% complete and fully functional: robot arm, controller, all cabling, and teach pendant. Kljdpfx Ahewvuh Ujvsp Includes our warranty and a detailed 77-Point Protocol evaluation performed by our in-house robotics engineers. Brand: ABB Type: IRB1660ID-6/1.55 Typical welding robot but can also be used for other applications. Controller: IRC5 Payload: 6 kg Reach: 1.55 m Featuring a unique combination of high payload capacity, large working range, and Integrated Dressing (ID), which routes all cables and hoses inside the robot’s upper arm and wrist. IRS Robotics® refurbished: 77-Point Protocol - fully tested on our test benches, new oil/grease, new batteries, fully cleaned, painted in your desired RAL colour. Includes Accuracy Status Measurements (repeatability, accuracy, backlash). About: Our daily trusted business is the delivery of refurbished A-Brand robots: ABB – KUKA – FANUC – YASKAWA. Established 2002. We ship worldwide.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Grinding worm dimensions: Kjdpfsyfnlksx Ahvslp Min./Max. outer diameter: 280/350 mm Width: 84/104 mm Max. pitch with limitations: MOD 8.0 (DP 3.2) Number of threads: up to 3 with limitations Max. usable width (shift distance): 90 mm For detailed technical information, please refer to the attached PDF file. Accessories: Several Fässler diamond wheels Dressing device Grinding stones Turbo separator

Condition: good (used), Year of construction: 2005, operating hours: 114,129 h, functionality: fully functional, machine/vehicle number: 2820, Sale only within Germany Control System: Siemens Sinumerik Software: Haas Software 7.3 Number of Axes: 6 (X, X3, Y, Z, C, A) Grinding Spindle: - Continuously variable up to 8,000 rpm - Haas short taper - Grinding wheel diameter max. Ø200 mm Workpiece Spindle: - Up to 1,000 rpm - Centre height 175 mm - Clamping collet 3409 - Taper mount SK50 - Through bore Ø28.5 mm - Workpiece weight up to 2.5 kg - Indexing accuracy +/- 3.5 arcseconds - Input increment 0.001° Workpiece Support: Linear axis X3 with bushing holder Feed Drives: - Linear axes with ball screw spindles - Direct length measurement with 0.0001 mm resolution Workpiece Dimensions (Drills): - Ø 0.8 - 15.0 mm - Overall length 20 - 380 mm - Grinding length 10 - 360 mm - Max. workpiece weight 2.5 kg Chain Magazine: - 42 stations Kljdpfx Aewpqkrehvsp - Ø 0.8 - 15.0 mm - Length 80 - 250 mm - Max. workpiece weight 1.5 kg Stack Magazine: - Preparation for stack magazine for indexable inserts Measuring System CCD Area Camera: - Indexing and positioning of tools by coolant channel (from Ø0.8 mm) - Measurement of opening angle - Indexing of multi-groove drilling and reaming tools Renishaw Probe: - Touch-off for workpiece length/tool tip - Scanning of groove pitch - Positioning in coolant channel bore at tool tip Electrical Connection: - 63A main fuse - Mains voltage 400V - Frequency 50 Hz - Control voltage 24V - Rated power 21 kW Weight: 8 t Including: - Control cabinet cooling: water-water heat exchanger - Fire protection system: Kraft und Bauer extinguishing system - Extraction unit: Büchel Smog-Hog SH 2000/T - Dressing unit (stationary dresser) - Pressure plate ----- Operating Procedure – For Drills: - Manual loading of chain magazine outside machine enclosure - Automated workpiece handling system - Automatic collet chuck clamping - Workpiece positioning in the working area - Workpiece machining - Automatic return of workpieces onto powered conveyor belt Operating Procedure – For Solid Carbide Indexable Inserts: - Manual loading of stack magazine inside working area - Automated workpiece handling system - Automatic clamping with special clamping fixture - Workpiece positioning in the working area - Workpiece machining - Automatic return of processed workpieces onto storage system Drill Grinding: - Grinding of flute profile - Grinding of cutting edge - Grinding of circumference profile - Grinding of relief chamfer - Grinding of periphery chamfer - Cylindrical grinding Indexable Insert Grinding: - Grinding of support face and pin ----- Two additional identical machines are also available for sale!

Condition: used, Grinding wheel dimensions (od x id x width): 610 x 355 x 304.8 mm Min/max diameter to be ground: 2 / 150 mm Regulating wheel speed steps: infinite Min/max regulating wheel speed (rpm): 10 / 225 rpm Dressing (auto/manual): Automatic - CNC Lubrication (auto/manual): Automatic Control type (CNC/manual): CNC CNC brand: FANUC CNC model: Oi TD Plunge (auto/manual): Automatic Regulating wheel dimensions (od x id x width): Ø350 x Ø203.2 x 355 mm Maximum plunge grinding length: 355 mm Coolant motor power: 0.70 kW Grinding wheel head motor power: 37 kW Total power: 45 kW Voltage: 220/380V Length: 1,165 mm Width: 3,398 mm Height: 1,700 mm Kljdpfoydqfwjx Ahvep Weight: 14,000 kg Accessories: Inline loader, Coolant filter, Supporting rulers

Condition: excellent (used), Grinding diameter capacity ~80 mm (Type 2H) Type 2HA variant ~120 mm Maximum in-feed grinding length ~200 mm Maximum through-feed grinding length ~300 mm (with normal guides) Grinding wheel diameter 400 mm Grinding wheel width 200 mm Grinding wheel bore 203.2 mm (8") Driving wheel diameter 254 mm Driving wheel width 200 mm Driving wheel bore 127 mm Main drive motor 11 – 22 kW Driving wheel motor ~1.1 kW Driving wheel speed ~10 – 200 rpm (continuously variable) Machine weight ~3,000 kg Footprint / Dimensions ~2,400 × 1,550 mm Voltage 380 V / 50 Hz / 3-phase Extras & Features Hydraulic dressing and trueing devices for both grinding wheel and driving wheel Variable speed drive on the regulating/driving wheel Base flange, support bridge, shims, and additional accessories included in many units The “2HA” variant extends capacity to 120 mm diameter parts. Kedsxrvgzjpfx Ahvolp We have two of these machines available.

Condition: new, Ideal for demanding craftsmen and carpentersThe particularly long dressing tables made of one piece enable easy dressing of the workpiecesWork tables are made of gray cast iron, making them robust and permanently flatRear-opening dressing tables with tension spring support for quick and easy retoolingThanks to the fixed extraction hood, it is not necessary to reposition the extraction hose during retooling, This saves valuable working timeHelically toothed steel infeed roller ensures constant and even wood infeedRubber outfeed roller in the thickness run-out ensures even wood outfeedMaterial feed with four speedsPlane thicknessing table adjustment via handwheel with integrated display for the planing heightDIGITAL: with electric thicknessing table height adjustment and digital displayOn/off switch in operator positionPowerful industrial motorThe high machine weight ensures maximum precision and smooth paration for slot drilling deviceQuality Made in ItalyTECHNICAL DATADimensions and weightsLength (product) approx. 2250 mm Width/depth (product) approx. 1370 mmWeight (net) approx. 695 kgJointerTotal length of tables 2250 mmChip removal max. Dressing 5 mmDressing fence length 1200 mmDressing fence height 150 mmSuction connectionSuction nozzle diameter thickness 1 x 120 mmInstallation informationSpace requirement length 2250 mmSpace requirement width/depth 1440 mmExplanation of space requirement: The dimensions take into account maximum travel distances or effective cknessThicknessing table length 520 mmThicknessing table width 850 mmWorking height thickness min. 3 mmWorking height thickness max. 240 mmWorking length thickness min. 220 mmChip removal max. thickness 5 mmElectrical dataDrive motor power 7 kWSupply voltage 400 VMains frequency 50 HzPlaner cutterheadPlaner shaft type TERSAPlaner shaft diameter 120 mmNumber of planer knives 4 pcsPlaner shaft speed 5000 min¯¹Planer width max. 520 mmFeedFeed speed 5/8/12/18 m/minSCOPE OF DELIVERYJointer-jointer fence with round bar guide4 feed speedsTersa planer shaftManufacturer no.5503501 Kedovwflbopfx Ahvolp

Condition: new, - NEW -- With TERSA cutter block for secondsChange planer knives- TERSA planing knife system enables particularlyquiet running- Helical-toothed steel feed roller forconstant and even wood intake- The particularly long planing tables from onePiece allow easy dressing of theWork pieces- Large planing fence can open when openingthe planing tables remain in position- Planing tables that open to the rear- The high machine weight ensures the highestPrecision and smooth running- Powerful industrial engine- Robust steel / cast iron construction- work tables are made of gray cast iron,post-annealed and stress-free, therebyinsensitive and permanently flat- Table lips for quiet runningEquipment detailsTERSA planing knife shaft- No more adjusting and screwing- Blade change in seconds- Self-locking- Particularly quiet- Perfect planing resultSuction hose connection- The suction nozzle of the planer and thicknesspoint in the same direction.- The hose connection is made by just oneSide off.- No hose is needed aroundthe machine passes ve- Stable chain drive- Steel drive wheels- Solid cast iron bearing blockPlaning mill- Prevent massive kickback protectionthe kickback of workpieces- TERSA planing knife shaft with three knivesensures an optimal planing patternThe material feed- Helical steel feed rollers for oneconstant and even material intakewithout prints- Multiple teeth grip at the same time for powerfulFeed- Wear-free in contrast to rubber feedrollingTechnical specifications:Length approx. 1725 mmWidth / depth approx. 880 mmWeight approx. 270 kgDressing chip removal max. 4 mmExtraction nozzle thickness 2 x 120 mmThick working height min. 3 mmThick working height max. 230 mmThickness of the chip removal max. 4 mmDrive motor power 4 kWConnection voltage 400 VMains frequency 50 HzPlaner knife shaft type TERSANumber of planing knives 3 pcsSpeed ??5200 min¯¹Planing width max. 300 mmFeed speed 7 m / minItem No. 5503031Storage location 97447 Gerolzhofen- free loaded- Kjdpfx Ahovwgaaevelp

Condition: new, - Maximum equipment for the professional with Tersa knife shaft.- Ideal for demanding craftsmen and joiners- The particularly long planing tables enable easy dressing of the workpieces- Work tables are made of gray cast iron, because of that insensitive and permanently flat- To the rear, planing tables that open at the same time for short set-up times- Helical-toothed steel feed roller ensures constant and even wood intake- Rubber pull-out roller in the outlet of the thickness ensures even wood pull-out- Material feed at four speeds- Plane thickness table adjustment via handwheel with numerical display for the planing height- TERSA planing knife system enables Knife changes within seconds as well particularly quiet running- The large planing fence (1200 mm x 150 mm) can when opened the planing tables remain in position- The high machine weight ensures the highest Precision and smooth running- Preparation for slot drilling equipment Digital version with electric thicknessing table adjustmentTechnical specificationsTotal length of the tables 2250 mmWorking width 520 mmmax. chip removal 5 mm--- Technical data thickness ---Dimensions thickness table 520 x 850 mmmin./max. Working height 3/240 king length thickness 220 mmFeed speeds 5/8/12/18 m / min Planer shaft diameter / planer knife 120 mm / 4 ed ??5,000 rpmMotor 400V / 50Hz / S6-40% 7.0 kW (9.5 HP)Extraction nozzle diameter 1 x 120 mmWeight 695 kg Slot drilling device (option)Table size 470x230 mmCross / longitudinal stroke 160mm / 110 mmVertical stroke 120 mmExtraction nozzle diameter 1x120 mmManufacturer number 5503511 Kedpfx Asvwd U Iehvelp

Condition: new, - New -Description:TERSA quick-change system for changing planer knives in secondsFour-blade shaft for best planing resultsSmooth running thanks to precision unit and heavy cast iron designLong planing tables for precise planingRobust dressing tables made of ribbed gray cast iron, milled and stress-free, making them insensitive and permanently flatLarge, sturdy aluminum dressing fence with round rod guide (1200 x 150 mm), easily adjustable and tiltable up to 45°With auxiliary fence as standardPowerful 5.0 kW industrial motorSturdy cast steel constructionSlot drilling device can be retrofittedLength (product) approx. 2250 mmWidth/depth (product) approx. 1370mmWeight (net) approx. 465kgJointerTotal length of the tables 2250mmMax. chip removal 8mmDressing fence length 1200mmDressing fence height 160mmSuction connectionSuction nozzle diameter 120mmInstallation informationSpace requirement length 2250mmSpace requirement width/depth 1440mmExplanation of space requirementWorking area length 1000mmWorking area width/depth 3500mmChip removal max. thickness 8mmElectrical dataPower drive motor 5kWSupply voltage 400VMains frequency 50HzItem no. 5503521 Kedpfx Ahevwf Hrjvslp

Condition: excellent (used), Year of construction: 2010, feed length X-axis: 600 mm, feed length Y-axis: 220 mm, feed length Z-axis: 540 mm, feed rate X-axis: 30,000 m/min, feed rate Z-axis: 3,000 m/min, table length: 400 mm, table load: 250 kg, table width: 250 mm, Surface grinder Ziersch - ZT 24 MACH-ID 9344 Make: Ziersch Type: ZT 24 Control: Mitsubishi TOUCH Panel Year: 2010 Sturdy, cast iron execution of all machine components High machine weight for maximum rigidity Preloaded precision linear guideways in the vertical- and cross axis (Bosch Rexroth) for highest accuracy Scraped and turcite coated slideways in the longitudinal axis provide excellent vibration absorption and a high-quality grinding surface pattern. Hydraulic longitudinal motion with return cooling unit to achieve good surfaces Electro-mechanic cross- and vertical motion Measuring systems in vertical axis (Heidenhain) for precise positioning Maintenance-free paper band filtration unit with up to 500 l tank and 2-bar pressure pump for effective cooling and rinsing Integrated rinsing channel Magnetic separator for prefiltration of the paper band filtration unit Infinitely variable grinding spindle motor Machine lamp Table-mounted dressing device for high precision and surface finish Electro-permanent magnetic chuck (SAV) with integrated pole changing unit and traction regulation Partial encapsulation of the machine with sliding door and a service door Effective splash guard and an excellent accessibility Preparation of the machine for installation of a coolant mist exhaust unit Control system features: Very comfortable and easy to operate Z-control Automatic vertical infeed with dressing amount compensation Fully automatic grinding cycle with dressing cycles Easy operation via touchscreen Large and clear colour screen (10.4") Electronic handwheel, usable in vertical- and cross axis X - Travel: 600mm Y - Travel: 220mm Z - Travel: 540mm Table Length: 400mm Table Width: 250mm Table load: 250 Feed rate X-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Grinding stone dimensions:250 x 38 x 50,8mm Power: 3,7kW Speeds: 4500Rpm Cooling system: Yes Feed rate Y-Axis: 30000mm/min. Length: 3050mm Width: 2050mm Height: 2510mm Weight: 2900kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Klsdpfox Sw H Eox Ahvsp

Condition: new, The HFS 52 NC, a robust Conventional Surface Grinder from KNUTH, stands out in the Grinding Machines category for its advanced grinding capabilities. This machine is tailored for automatic and semi-automatic surface and flute grinding, offering an impressive grinding area of 520x200 mm. With easy programming via a touchscreen, operators can expect precision and efficiency, which are further enhanced by the automatic grinding wheel dressing mode that integrates seamlessly into machining cycles. Designed for continuous operation, it features dual guides for unwavering linear motion, servo drives for precise adjustments, and a heavy-duty spindle head with maintenance-free bearings. Furthermore, the HFS 52 NC excels in its thermal stability, aided by an external hydraulic unit and an efficient cooling system. Whether for repair workshops or series production, this machine accommodates diverse operational needs. For those looking to elevate their machining process, we invite you to order online and experience the advantages of the HFS 52 NC in your own facility. Klsdeq R Slgopfx Ahvjp

Condition: used, Grinding wheel puller, cup wheel puller, double grinder stand puller, surface grinder puller, cylindrical grinder puller, puller head, dressing head for grinders, grinding wheel dresser, radius dresser, disc puller, grinding wheel puller -Grinding wheel puller: for grinding wheel radius production -Motor power: 0.7 kW -Dimensions: see photos -Equipment: coolant connection, dressing device -Dimensions: 600/540/H330 mm Klsdpfxeitt Shs Ahvop -Weight: 49kg

Condition: used, Grinding wheel puller, cup wheel puller, double bench grinder puller, flat grinder puller, cylindrical grinder puller, puller head, dressing head for grinding machines -Edition: mm -Number: 1x disc puller available -Price: per piece -Dimensions: 310/170/H200 mm -Weight: 6.7 kg Kedpfx Ahodp Npfjvolp

Condition: used, Saw blade, wood saw blade, circular saw blade -Manufacturer: Dress, saw blade HW -Type: Ø 420x4.0/3.2x30 Z96 TFP -Art. No.: 342031 -Speed: n max. 4500 rpm -Number: 4x saw blade available -Price: per piece -Dimensions box: / 430/430/H10 mm / / 430/430/H10 mm Kodpfouaqz Iex Ahvolp -Weight: 3.6 kg/piece

Condition: used, Grinding wheel puller, cup wheel puller, double bench grinder puller, flat grinder puller, cylindrical grinder puller, puller head, dressing head for grinding machines -Support: 150 mm -Number: 1x disc puller available -Price: per piece Klodpfxed Ebpce Ahvep -Dimensions: 192/94/H128 mm -Weight: 5.3 kg

Condition: good (used), Grinding wheel pullers, cup wheel pullers, double bench grinder pullers, surface grinder pullers, cylindrical grinder pullers, dressing heads, dressing heads for grinding machines -Coverage: 255 mm -Quantity: 1x disc puller included Price: per piece -Dimensions: 510/165/H290 mm Kedpfjdpkzwox Ahvjlp -Weight: 34 kg

Condition: used, Grinding wheel puller, cup wheel puller, double grinder stand puller, surface grinder puller, cylindrical grinder puller, puller head, dressing head for grinding machines, grinding wheel dresser, radius dresser, disc puller -Manufacturer: EHS, grinding wheel dresser, grinding wheel puller -Tip height: 173 to 238 mm Klsdeqqpi Ispfx Ahvjp -Dimensions: 185/180/H180 mm -Weight: 5.7 kg

Condition: used, Spotting ruler, dressing ruler, test ruler, straightening ruler, straightening bar -Spotting ruler: 60° -Ruler length: 2015 mm -Dimensions: 2275/120/H105 mm -Weight: 90 kg Kljdpfx Aofbyc Dshvsp

Condition: used, Grinding wheel puller, cup wheel puller, double bench grinder puller, flat grinder puller, cylindrical grinder puller, puller head, dressing head for grinding machines -Number: 1x disc puller available -Price: per piece Kljdpfod R Ikdox Ahvep -Dimensions: 325/130/H135 mm -Weight: 7.3 kg

Condition: used, Year of construction: 1993, Technical details: rotary table diameter: 2x700 mm grinding height: 200 mm grinding head - power requirement: 15 kW max. dia. of grinding wheel: 400 mm grinding spindle speed: 1400-2800 stufenlos /continous U/min automatic feeds: 0,001-0,02 Kodpfx Aheu Ngp Nsvelp weight of tools max.: 650 kg table speed: 5-10 m/min rotary table revolutions per minute : 5-10 stufenlos U/min rotary table: Querbewg. 0,2...10 m/min total power requirement: 49 kW weight of the machine ca.: ca. 12,0 t dimension machine xH: 6,0x3,0x2,8 m dimensions electric cabinet LxWxH: 2,0x0,55x2,2 m ROTARY TABLE SURFACE GRINDING MACHINE - 2 magnetic rotary tables each Ø=700mm - diamond roller dressing device - without coolant unit i.D. *

Condition: used, Year of construction: 1987, Technical details: grinding length: 600 mm grinding width: 350 mm workpiece height: 600 mm feed: 1 - 30 m/min magnetic plate size: 610 x 255 mm distance table - spindle center: min./max. 150 / 420 mm grinding spindle speed: 3000 U/min stroke of the table: min./max.: 200 / 650 mm total power requirement: ca. 4,0 kW weight of the machine ca.: 2,5 t dimension machine xH: 1,5 x 1,9 x 2,0 m dimension coolant device LxWxH: 0,63 x 0,40 x 0,65 m Headstock: -vertical travel Y = 0.002 - 0.06 mm -adjustment = 0,001 - 2mm Cross slide: -transverse travel Z = 360mm -feed adjustment = 1 - 60mm/stroke -rapid traverse = 1.2 m/min. Dressing manual Cooling water unit with capacity 140Liter Equipment: -3x support feet -machine lighting accessories: Kedpsu Ngicefx Ahvelp -alignment device for grinding wheel holder *

Condition: used, Year of construction: 1984, Technical details: grinding length: 500 mm grinding width: 250 mm workpiece height: 250 mm table surface area: 530 x 200 mm magnetic plate size: L:460 x B:150 x H:87 mm table speed: 2 - 32 m/min table adjustment: Längsweg: 550 mm table adjustment: Querweg: 300 mm feed of spindle: 0,001 mm/Hub grinding spindle speed: 3.000 U/min dimensions of grinding wheel: max. Ø 250 x B:25; Bohung Ø 76 mm total power requirement: 4,3 kW weight of the machine ca.: 2,2 t dimension machine xH: 2,3 x 1,8 x 2,2 m dimensions of hydaulic: L: 500 x B: 480 x H: 680 mm dimension coolant device LxWxH: 0,65 x 0,45 x 0,8 m The machine is currently equipped with a grinding wheel Ø 240 x 22mm. On the table there is a permanent magnet plate with 30 induction fields, operated by a hand lever. Operation via swiveling control panel. Kjdpfxeu Ngkys Ahvjlp no dressing device incl. oil collecting tank; grinding wheel holder and available documentation *

Condition: used, Year of construction: 1994, Technical details: grinding diameter: 198 mm grinding length: 200 mm z-axis: längs:240 mm x-axis: quer: 340 mm Ksdpfju Ng A Nsx Ahvjlp control: Tschudin CNC E 9034B grinding wheel diameter: 500 mm centre height: 100 mm Distance between centres: 300 mm max. workpiece weight between centres: 100 kg interface: RS 232 total power requirement: 16 kVA weight of the machine ca.: 4,5 t space requirement of the machine approx.: L:3,1xT:3,2xH:2,0 m Plunge type grinding automatic technical specifications: - grinding spindle tool intake: 203,2mm - grinding spindle not swiveling - workpiece spindle swivelling : +30° to -90° - tailstock collet cone = MK 3 - control: ISO - and graphically programing equipment: - electronical balancing device : AB 100 T.K. - grindig wheel changing aid - grinding disc dressing device (also for grinding forms programable) - cooling system with paper filtering system - Measuring device (out of function, integrated measuring control not connected) *