Used Double Plate Clutch for sale (20,492)

Condition: used, functionality: fully functional, Due to relocation, we are selling our bench grinder with stand from Safag. The machine can be collected on-site at our plant in Königsbach-Stein. Ljdpfx Aey Etauefasrk

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, DOUBLE GLASS BEADING SAW TRF 527 NC FP CA MM.4000 (according to nameplate) Double mitre saw for simultaneous cutting of two superimposed glass beads. Ljdpfoy Er Ikjx Afasrk Right saw unit is fixed; Adjustment of the left unit is based on the set cutting length, which can be read from a digital display. Units are equipped with supports that enable simultaneous cutting of 2 glass beads. For cutting larger cross-sections, the upper support can be removed. After the cutting process is completed, the pneumatic clamping cylinders automatically swivel to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital measurement display • Pressure monitor • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release and motor protection switch • Pressure monitor • Tool kit • Safety covers with horizontal, swiveling clamping devices • Two-hand control • Belt drive • Pneumatic unit lift • Central support TECHNICAL DATA • Motor output 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 4000 mm • Min. cutting length 158 mm • Weight approx. 290 kg • Space requirement (standard equipment) approx. 4,500 x 1,000 mm 1 set of 2 mechanical stops for setting up to 4 intermediate angles. Additional central support. 1 set of adjustments for rebated profiles 1 set of adjustments for rebated profiles according to drawing: - Adapter on the clamping devices to compensate for profile inclination - Shims on the rear stops of the units and the central piece. The sketch below (in green) shows a beveled presser following the inclined profile and pressing it against the (red) shim on the stop. Details provided without guarantee.

Condition: excellent (used), Year of construction: 2002, EXNER Press Ljdoy Erlpopfx Afaerk EXSBZRD 500/100 Press force: 5,000 kN Tool dimensions: 1,800 x 1,200 mm Max. stroke length: 600 mm Working speed: 16/30 mm/s Rapid traverse speed: 400 mm/s Including feed and transfer unit

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 1,429 h, load capacity: 2,000 kg, lifting height: 1,660 mm, fuel type: electric, mast type: telescopic, construction height: 1,370 mm, fork length: 1,150 mm, drive type: Elektro, Double-deck stacker Load center: 600 mm Mast type: Telescopic Transmission: Electromechanical Condition: Ready for use and fully functional Technical condition: Very good Front tire type: Vulkollan Rear tire type: Vulkollan Battery voltage: 24V Battery capacity: 250Ah Battery manufacturer: Still Battery type: PzS Battery year: 2020 Description: In addition to this unit, we offer a range of forklifts and warehouse equipment. All our machines are workshop and FEM 4.004 inspected. Please contact us by email or phone. You can also find us at hsr-gabelstapler. Of course, we are interested in purchasing your used equipment, even if you do not buy a vehicle from us. Lease-purchase and financing options are available on request and at attractive rates. We are happy to advise you competently and in detail about our vehicles. Load backrest, impulse control, initial lift, non-marking tires, double-deck loading, Lredsy A Ub Uopfx Afaek

Condition: good (used), functionality: fully functional, Year of construction: 2007, ADVAND Grafoteam PST26 plate stacker, 2007 cleaned and tested ADVAND Grafoteam PST36 plate stacker, 2005 cleaned and tested Lrsdpfju Hl Hhex Afaek ADVAND Grafoteam PST36 plate stacker, 2008 cleaned and tested ADVAND Grafoteam MDT26C Conveyor, 2005 cleaned and tested All offers subject to prior sale

Year of construction: 2025, condition: used, We are offering this used M.S.K. OMRM 133 OMRM133 automatic double-head PVC alu machine, diameter 550 cm, year of manufacture 2025. Model: OMRM 133 Ledpfx Afjy Encweaerk Serial number: 25DCM330004 Production date: 2025 Power: 6.5 kW Voltage: 400 V Frequency: 50 Hz Current: 32 A Air pressure: 6-8 bar Air consumption: 95 l/min Weight: 1220 kg Width: 1985 mm Length: 8110 mm Height: 1895 mm Country of origin: TURKIYE If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 1983, travel distance X-axis: 6,000 mm, Spindle diameter: 200 mm Lodoy Enb Hspfx Afajrk Machining width: 6000 mm Machining height: 3150 mm Max. machining depth: 1985 mm Slide cross section: 530 x 550 mm Table load capacity: 20 t Plate field size: 11200 x 5550 mm Tool holder: SK 60 Machine weight approx.: 173 t Additional information: - Additional equipment: large and small angular heads - Listing No.: 22979 - The table is model S20 MP, size: 2200 x 2500 mm - The machining width on the X-axis of the machine is 6000 mm - Including 6 plates measuring 5600 mm x 1850 mm

Condition: good (used), Year of construction: 1987, travel distance X-axis: 11,500 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 2,000 mm, x-travel 11,500 mm Lrodpfx Afsy Enavjask y-travel 4,500 mm w-axis 1,600 mm z-axis 2,000 mm Spindle diameter 200 mm Rotary table 3,000 x 4,000 mm Bed length of rotary table 4,600 mm Tool holder SK50 Workpiece weight on rotary table 80 t Total power requirement 83 kW Additional information incl. 15 plates

Condition: good (used), Year of construction: 1999, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,150 mm, Control: Siemens 840 D Powerline Tool holder: HSK-A63 Max. rpm: 16,000 X-travel: 3,000 mm Ljdpfxey Em Rgj Afasrk Y-travel: 2,500 mm Z-travel: 1,150 mm A-axis: +/- 100 mm C-axis: +/- 181.5 mm Table size: 3,000 mm x 2,500 mm Option: External blowing air Kinematics: Fork head

Condition: used, Assembly table, T-slot work table, welding table, T-slot table, T-slot plate Overall dimensions: 3500 x 2500 x 600 mm Weight: 8.9 t T-slot width: 36 mm Ledpfxey Emp Ns Afaerk Number of T-slots: 12 pcs

Condition: used, Assembly table, T-slot worktable, welding table, T-slot table, T-slot plate Overall dimensions: 5000 x 2000 x 600 mm Weight: 9.5 t Lrjdpfoy Empijx Afajk T-slot width: 36 mm Number of T-slots: 7 pieces

Condition: good (used), Year of construction: 1999, KAISER Press KSTU 3150 - 20 - 5 RK Press force: 3,150 kN Strokes per minute: 20-150 1/min Stroke adjustment: 20-180 mm Ram adjustment: 150 mm Table area: 2,000 x 1,250 mm Ram area: 2,000 x 1,000 mm Installation height: 600 mm Lsdsy El S Aspfx Afaork FECKER strip feeding line Strip width: 30-600 mm Strip thickness: 0.3-8.0 mm Max. coil weight: 8,000 kg

Condition: good (used), Year of construction: 2000, Kaiser Press KSTU 3500 - 25 - 6 P Press force 3,500 kN Stroke rate 20–100 1/min Stroke adjustment 40–250 mm Lrodpfey El Iqjx Afaek Ram adjustment 200 mm Table area 2,500 x 1,250 mm Ram area 2,500 x 1,100 mm Installation height 700 mm Dreher strip feeding line Strip width 30–600 mm Strip thickness 0.3–3.0 mm Max. coil weight 3,500 kg

Condition: used, Year of construction: 1992, Technical details: sheet width: 3050 mm plate thickness: 8 - 16 mm distance between columns: 4800 mm control for program: CNC back gauge: max. 1000 mm cutting angle: 0,5 -3,0 ° down holder: 18 Stück Total power requirement: 30 kW height over floor: 2550 mm weight of the machine ca.: 14 t dimensions of machine: 4,8 x 2,3 x 2,6 m Lsdpsy A Rnqofx Afasrk

Condition: excellent (used), mileage: 176,925 km, power: 125 kW (169.95 HP), first registration: 08/2018, fuel type: diesel, tire size: 195/75R16, axle configuration: 4x2, wheelbase: 3,950 mm, fuel: diesel, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: steel, total length: 6,590 mm, total width: 2,200 mm, total height: 2,350 mm, permissible axle load (axle 1): 1,850 kg, permissible axle load (axle 2): 2,450 kg, loading space length: 3,210 mm, loading space width: 2,150 mm, loading space height: 400 mm, Year of construction: 2018, Equipment: ABS, AdBlue, air conditioning, airbag, central locking, cruise control, electric window regulation, fog lights, power assisted steering, power mirror, soot filter, traction control, trailer coupling, General information Number of doors: 4 Registration number: M55846 Lrodpfxovz U Ute Afaek Technical information Number of cylinders: 4 Engine capacity: 1.995 cc Axle configuration Tyre size: 195/75R16 Brakes: disc brakes Front axle: Max. axle load: 1850 kg; Steering; Tyre profile left: 50%; Tyre profile right: 50% Rear axle: Double wheels; Max. axle load: 2450 kg; Tyre profile left inner: 80%; Tyre profile left outer: 40%; Tyre profile right outer: 80%; Tyre profile right outer: 40% Weights Empty weight: 2.541 kg Carrying capacity: 959 kg GVW: 3.500 kg Maintenance APK (MOT): New APK (MOT) upon delivery Condition Technical condition: very good Visual appearance: very good Damages: none Additional information Please contact Moussa or Youssef for more information = Additional options and accessories = - Heated door mirrors - Leaf spring suspension - Multifunctional Steering Wheel - Particulate filter - Radio/Cd/Audio system - Spare wheel = Remarks = VIDEO: Very nice and neat Ford Transit 2.0 TDCI 170 HP Euro 6 B Flat bed van / Pick up DC Double cabin 6 seats 176000 km Fully dealer maintained GVW 3500 KG / Driving license B Air conditioning / Cruise control / Tow bar Towing weight: 2800 KG Technically and optically in good condition

Condition: good (used), Year of construction: 2015, Double edging saw with electric adjustment via joystick or programming (manufacturer Weintek Austria). Alignment of the beam through 3 cross chains (can be controlled individually or synchronously). Max. cutting length 4.2 m. Kerf display with 2 lasers. Saw motors each 6.5 kW. Max. cutting width 0.6 m. Max. cutting height 80 mm. Max. cutting height 60 mm. Lrodpfxewy Hv Es Afaek

Condition: good (used), Year of construction: 1996, double-sided top and bottom sanding with sanding shoe and dust brush max. sanding width 300 mm max. sanding height 200 mm year of manufacture 1994 with CE mark Ledpfjxfl Eaox Afaork

Year of construction: 1999, condition: used, Angle display: digital Length stop flap measurement display: digital Lrodpfxjy A Hike Afaek

Condition: excellent (used), Year of construction: 2000, 2 static spreading plate separators for the extraction of filler sand 1 x type: CC1180 ST and 1 x type: CC1180R Pick-up size: 4-5 mm End product: up to 150 µm Electric drive 7.5 and 11 kW in addition a cyclone - model: Hurriclone from PM-Technologies Lrsdeqi Hcgspfx Afask

Condition: used, Resonance vibrating screen Screen surface: 5,500 x 1,300 mm Lredpfx Afstpgdyjask with base frame and electric drive

Year of construction: 1986, condition: good (used), screen deck: approx. 2.000 x 7.000 mm incl. 30 kW E-motor incl. springs and spring support Lrodpfx Afsnub N Teajk incl. screen meshes

Condition: used, functionality: fully functional, Screening area: approx. 1,200 x 2,400 mm 5.5 kW electric motor Lsdpfxjwm Nfcj Afaork with piping and water spray nozzles Semi-mobile steel structure with bypass platform

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 04631037, cutting length (max.): 6,000 mm, Elumatec DG 104 Double Mitre Saw (Year 2006) – Precision Aluminium Processing Ledpfxoyvrq To Afasrk For sale is a used double mitre saw, model Elumatec DG 104, manufactured in 2006. This machine is specifically designed for precision machining of aluminium and plastic profiles, making it ideal for use in window, door, and façade construction. Technical Highlights: - Double-sided tilting saw units for precise mitre cuts - Suitable for double mitre cuts from 45° to 90° - Robust machine construction for low-vibration operation - Pneumatic material clamping for secure workpiece hold - High cutting precision and repeatability - Intuitive operation Features: - 2 saw units - Pneumatic clamping device - Length stop - Cooling/spraying device Condition: The machine is in used, fully functional condition. Normal signs of use are present, but do not affect functionality. Application Area: Ideal for metalworking shops, window manufacturers, and workshops that require precise and efficient mitre cutting. Other: Viewing by appointment possible. Loading can be supported if necessary. All information without guarantee. Subject to prior sale.

Year of construction: 2021, condition: new, cylinder diameter: 133 mm, Maximum Operating Pressure 700bar Capacity Class (tonnage) 200 Lrjdpfx Ashhfa Tjfaok Maximum Cylinder Capacity Advance (kN)1995 Stroke (mm) 152 Collapsed Height A (mm) 430 Extended Height B (mm) 582 Outside Diameter D (mm) 247 Cylinder Bore Diameter E (mm) 190,5 Plunger Diameter F (mm) 133,4 Base to Advance Port H (mm) 57 Top To Retract Port I (mm) 96 Saddle Diameter J (mm) 133 Weight (kg) 147

Condition: used, functionality: fully functional, machine/vehicle number: 3217, sheet thickness steel (max.): 50 mm, working width: 2,500 mm, Boldrini SIJ 2500x50 Three Roll Initial Pinch Plate Bending Machine 2,500mm x 50mm plate capacity Cardan shaft drive from gearbox Radio control console control of rolls and rolling speed Lsdpfjy Azgwsx Afaork