Used Doosan Dl 450 for sale (291)

Condition: used, fuel type: diesel, fuel: diesel, Year of construction: 2022, operating hours: 687 h, Doosan 77.55 compressor – 3000 rpm – 8.6 bar – 35.5 kW – weight 750 kg – 687 operating hours – with new hoses and hammers = More information = Cgsdpjx Scplefx Akcet Year of manufacture: 2022 Intended use: Construction Contact Miguel Cubas for more information. = Company information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday, continuously from 8:30 am to 7:00 pm.

Condition: used, Year of construction: 2007, operating hours: 67,434 h, functionality: fully functional, machine/vehicle number: PT18SY0210, turning length: 300 mm, turning diameter: 230 mm, spindle motor power: 18,500 W, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 205 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 350 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 6,000 rpm, feed length Z-axis: 350 mm, feed rate Z-axis: 30 m/min, chuck outer diameter: 250 mm, bar diameter (max.): 65 mm, overall weight: 8,800 kg, We are offering a high-performance and reliable Doosan TT1800SY CNC turning center, ideal for demanding serial production as well as complex precision machining. Key Features: Dual spindle (main + sub spindle) Y-axis for off-center and complex machining Twin turret system (upper + lower turret) Live tooling capability Full spindle synchronization (simultaneous machining) High productivity with reduced cycle times Technical Specifications: Max. turning diameter: approx. 230 mm Max. turning length: approx. 300 mm Bar capacity: approx. 65 mm Spindle speed (main/sub): up to 5,000 rpm Spindle motor power: ~18.5 kW Y-axis travel: ±50 mm X/Z axis travels: approx. 205 mm / 350 mm Rapid traverse rates: up to 30 m/min Turrets: 2 × 12 stations Live tooling speed: up to 6,000 rpm Tool holders: BMT55 Csdpfxey D Rypo Akcegt Control system: FANUC 18iTB C-axis: both spindles

Condition: good (used), Year of construction: 2014, Gas forklift DOOSAN GX30 (model G30G), No. FGA0Y-1480-00876, year of manufacture 2014, lifting capacity 3,400 kg, lift height 3,000 mm, mast height approx. 250 cm (duplex mast), hydraulic side shift, 2,106.5 operating hours (read from the meter). Cedpfxoy D Dxxe Akcogt

Condition: good (used), LPG forklift DOOSAN 70 (model G705-5), No. FG806-1050-00241, year of manufacture 2014, lifting capacity 7,000 kg, lift height 3,300 mm, mast height approx. 220 cm (duplex mast), hydraulically adjustable forks, 567.3 operating hours (read off). Cgjdpfx Akoy D Dxlecot

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Turning center with infinitely variable swiveling milling head and Y-axis, motorized lower turret and subspindle. Condition: Very well preserved, machine comes from a company liquidation. Time recording: Control unit on: 13127 hours Runtime: 3833 hours Processing time: 2835 hours The upper head is fed by a tool magazine and can turn or mill at various angles. Even highly complex components can be completely machined without further repositioning. Fanuc 31i-B CNC control Swing diameter over bed: 1000 mm Maximum turning diameter: 760 mm Maximum turning length: 1540 mm Maximum bar diameter (manual/continuous): 76/76 mm Y-axis travel: 230 mm (±115 mm) Clamp (counter spindle) ASA interface: A2-8 Csdpfxeyzzf Rj Akcegt Spindle speed: 4000 rpm AC motor power (cont./30 min.) 22/26 kW Turning/milling head B-axis rotation / indexing 240 deg. (±120 deg.) Tool holder Capto C6 Speed in revolutions per minute 12000 rpm AC motor power 30 min. 15/18.5 kW 40-station ATC Tool turret Number of driven tools 12 (12)

Condition: excellent (used), functionality: fully functional, power: 40.45 kW (55.00 HP), color: red, overall weight: 5,930 kg, digging bucket width: 600 mm, Year of construction: 2015, operating hours: 4,250 h, machine/vehicle number: AFVF6007995, Equipment: UVV, air conditioning, cabin, standard shovel, Technical data: Weight: 5,930 kg Dimensions: 6,120 x 1,920 x 2,855 mm Maximum speed: 20 km/h Power: 40.8 kW (55.5 hp) The excavator is used and has been regularly maintained. Air conditioning available. Including MS03 accessories: 600 mm digging bucket KL4 1,500 mm hydraulic ditch cleaning bucket Cjdpfjy D A Apjx Akcogt Häner HGS53 hydraulic hammer Kinshofer grab, 600 mm wide Ripper tooth

Condition: used, Table size: 1600 x 750 mm X-axis travel: 1525 mm Y-axis travel: 770 mm Z-axis travel: 625 mm Cedpfx Aoy D Aahekcsgt Spindle distance: 150 ~ 775 mm (min & max) Table load capacity: 1500 kg Rapid traverse rate: 30 / 30 / 24 m/min Tool shank: BT40 Tool capacity: 30 pcs Machine weight: 13,500 kg

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, turning length: 513 mm, turning diameter over cross slide: 300 mm, spindle speed (min.): 4,500 rpm, spindle bore: 76 mm, travel distance X-axis: 200 mm, travel distance Z-axis: 580 mm, DOOSAN PUMA 240MS LATHE WITH SUBSPINDLE AND BAR FEEDER Cgsdpfxoyivake Akcst

Condition: excellent (used), Year of construction: 2016, operating hours: 3,204 h, functionality: fully functional, turning diameter over cross slide: 390 mm, turning length: 562 mm, turning diameter: 390 mm, spindle bore: 76 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 580 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,700 mm, total length: 2,834 mm, total width: 1,628 mm, turning diameter over bed slide: 600 mm, overall weight: 3,500 kg, bar passage: 65 mm, chuck outer diameter: 210 mm, spindle nose: ASA A2#6, Equipment: documentation/manual, Doosan Puma GT 2100 CNC lathe, year 2016, in excellent working condition and ready for production. Reliable and high-performance machine, ideal for precision turning operations in small and medium batch production. Equipped with tailstock, 12-position static turret, tool presetting system, 6 boring bar holders, and chip conveyor. Only 3,204 cutting hours. The machine is sold complete with all paper manuals. Robust construction, high accuracy, and excellent productivity. Cgsdey Dunwspfx Akcot An ideal solution for machine shops and subcontractors looking for a modern CNC lathe fully equipped with accessories. Machine available for inspection under power by appointment.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, travel distance X-axis: 2,160 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 650 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, torque: 118 Nm, controller manufacturer: FANUC, controller model: FANUC I SERIES, spindle speed (max.): 12,000 rpm, spindle nose: BT40, number of slots in tool magazine: 30, Equipment: chip conveyor, CNC milling machine of medium dimensions, intended for both rough and fine processing. A powerful motor in combination with high rigidity and a high-precision base spindle enable large removals and precision. The machine is a suitable answer to a wide range of requirements in production, especially in toolmaking. The machine is sold as a set with the equipment described in the listing. Machine is is good condition and regularly maintained. -10,4 " display - 200mm raised block for Z-axis - 12.000 RPM spindle 28 kW, 159,3 Nm -BT40 -30 tools magazine - 18 bar through the spindle cooling -oil skimmer belt type -ethernet connection -coolant gun -tool breakage detection with needle -automatic doors -robot interface -4th axis preparation -GSA CNC 400-R rotary table -GSA TSA-320S suport -Hydraulic aggregate 200 bar 2(3 A+B) -preparation for rotary table hydraulic 2x(3A+B) -seat air check -level sensor for coolant liquid -LNS MH500 chip conveyor -mist collector interface Csdpfoy Dtlzsx Akcjgt

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, torque: 118 Nm, controller manufacturer: FANUC, controller model: FANUC I SERIES, spindle speed (max.): 12,000 rpm, distance table to spindle center: 150 mm, spindle nose: BT40, number of slots in tool magazine: 30, Equipment: chip conveyor, CNC milling machine of medium dimensions, intended for both rough and fine processing. A powerful motor in combination with high rigidity and a high-precision base spindle enable large removals and precision. The machine is a suitable answer to a wide range of requirements in production, especially in toolmaking. The machine is sold as a set with the equipment described in the listing. Machine is is good condition and regularly maintained. -15 " display -2MB part program storage - 1000 programs - 12.000 RPM spindle 18,5kW, 118Nm -BT40 -30 tools magazine - 12 bar through the spindle cooling -oil skimmer belt type -ethernet connection -coolant gun -ball screw nut cooling -tool breakage detection in magazine -automatic doors -robot interface -4th axis preparation -Hiwin RCV 250 rotary table -HIWIN RTS 250 suport -Hidraulic aggregate 200 bar 2 A+B -4th axis fixture support hydraulic (3x oil, 2x air) Cgodpsy Dr A Eefx Akcet -seat air check -level sensor for coolant liquid -LNS MH500 chip conveyor -mist collector interface

Year of construction: 2005, condition: used, max. turning diameter 540 mm max. turning length 1.020 mm bar capacity 65 mm Spindle speed 5.000 min -1 driven tools turning speeds 10.000 U/min control FANUC 18i-TB Dimensions (L x W x H) 4.520 x 2.300 x 2.600 mm Cgedpfx Akjlmr Eijcjt machine weight ab. 12.000 kg CNC Turning- and Milling Center | DOOSAN - PUMA MX 2000 S equipped with chip conveyor. Additional equipment: + counter spindle + B axis The machine is in good condition. A machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MX2000S | MX-2000 S | MX 2000S | MX2000 S

Condition: used, Year of construction: 2018, travel -x axis 1.050 mm travel -y axis 570 mm travel -z axis 510 mm control HEIDENHAIN - TNC620 number of spindle speeds 12.000 U/min Cjdpfxew Dgcaj Akcjgt tool taper BT 40 table dimension (L x W) 1300 x 570 mm numbers of positions in the tool changer 30 Milling machining centers - vertical | DOOSAN - DNM 5700 equipped with 30-way tool changer, ITC cooling system and chip conveyor. The machine only has 13.600 spindle hours. The machine is in a well-maintained condition and has exclusively worked on Aluminum and Plastics. The machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DNM5700 | DNM-5700

Condition: ready for operation (used), proper working ra hydraulic rear view camera. Cgodpfx Aksy A Dt Hscst

Condition: excellent (used), Year of construction: 2008, operating hours: 8,500 h, functionality: fully functional, Vertical machining center DOOSAN MYNX 540, year 2008, installed in 2014. Working hours: 8,500, power-on hours: 25,000 – fully functional, in excellent mechanical and electrical condition. Cgedpfx Akey Azgqecjt Fanuc 21iMB CNC control Spindle 15/18 kW belt-driven, DIN 40 (DIN 69671 A40) Boxways – 30 tools – table size 1200mm x 540mm, maximum table load 800kg Spindle nose to table distance 150–775mm Travel: X 1020mm, Y 510mm, Z 625mm Chip conveyor with tank M8 pump and high-pressure through-spindle coolant pump Mist extractor – internal light – three-color signal light 10 DIN tool holders included Maximum tool weight 8kg Automatic lubrication – transformer Weight 7,000kg – machine in operation and available for inspection CE certified – manuals and certification included.

Condition: good (used), Year of construction: 2014, spindle speed (max.): 3,500 rpm, overall weight: 6,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, Main parameters: Controller: FANUC 0iD/31iA Chuck.: SAMCHULLY 10" Spindle bore: 86mm With jacket tube.:78mm Turret head: 12 main positions 12 secondary positions, BMT65 connection, Programmable hydraulic tailstock: MT5 Main spindle power: 22kW S1max=3500 1/min Cedpfx Akowtg Inocegt Living tool power: 5.5kw S2max=5000 1/min X movement range: 260mm Z axis movement range: 830mm Y axis movement range: + - 52mm (104mm) C axis Maximum turning length: L=760 Largest turning diameter: D=376mm Fast travel speed: 30m/min Automatic tool measurement with probe arm Weight: 6000 kg

Condition: good (used), Year of construction: 2016, spindle speed (max.): 3,500 rpm, overall weight: 6,450 kg, Equipment: documentation/manual, rotational speed infinitely variable, Main parameters: Controller: FANUC 0iD/31iA Chuck.: SAMCHULLY 10" Spindle bore.: 86mm With jacket tube.:78mm Revolver head.: 12 main positions 12 secondary positions, BMT65 connection, Sub-spindle: 4500 1/min Csdowtg R Ajpfx Akcegt Main spindle power: 22kW S1max=3500 1/min Living tool power: 5.5kw Tool speed max=5000 1/min X movement range.: 260mm Z axis movement range.: 830mm Y axis movement range: + - 52mm (104mm) C axis Maximum turning length: L=760 Largest turning diameter: D=376mm Fast travel speed: 30m/min Automatic tool measurement with probe arm Weight.: 6450 kg

Condition: used, Year of construction: 2018, x-travel 1300 mm Cgodpoy Aphcofx Akcet y-travel 670 mm z-travel 625 mm control Siemens Sinumerik 828D weight of the machine ca. 8500 kg

Condition: like new (used), Year of construction: 2021, functionality: fully functional, turning length: 700 mm, turning diameter: 230 mm, spindle motor power: 25 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 165 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 700 mm, spindle nose: ASA 8, CNC FANUC TRAVELS X axis: 165 mm Z axis: 700 mm Y axis: 100 mm X2 axis: 165 mm Z2 axis: 700 mm Y2 axis: 100 mm CAPACITY Max turning diameter: 230 mm Max swing diameter: 230 mm Cgedpfoy Apcaex Akcet Max turning length: 700 mm Max bar capacity: 65 mm MAIN SPINDLE Spindle nose: ASA 8” Spindle speed: 5.000 rpm Spindle bore: mm 80 Spindle motor power: 25 kW SUB-SPINDLE Spindle nose: ASA 8” Spindle speed: 5.000 rpm Spindle bore: mm 80 Spindle motor power: 25 kW UPPER TURRET Number of stations: 12 Live tooling power: 7.5 kW LOWER TURRET Number of stations: 12 Live tooling power: 7.5 kW Machine equipped with: • Two high-pressure pumps, 35 bar, with inverter • Linear scales • Two collet chucks as per photos • Basic set of driven and static tool holders • Instruction manuals and CE declaration

Condition: used, Year of construction: 2009, Doosan HM1000 Heavy Duty Twin Pallet Horizontal Machine Centre. S/No HM10000080 (11/2009) with Fanuc 31i model A Control, Pallet size 1000mm x 1000mm, Travels X = 2100mm, Y = 1250mm, Z = 1250mm, Big Plus Spindle BT50, Spindle speeds 20 – 6000rpm, RUCKLE Full ‘B’ axis, Max Table load 5000kg (upgrade capacity), ATC Carousel 90 positions, U Axis fitted to Spindle for D-Andrea Heads, Renishaw TS27R Tool Probe, Renishaw RMP 60 Spindle Probe, Qty of BT50 Toolholders (Backend only), Screw Drive Swarf Conveyor, Filtermist, Main Spindle refurbished in 2020, Machine Weight 29,000kgs Cgjdpfoy Amg Ajx Akcet Location: These lots are located in Dunfermline, Scotland, UK. Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Condition: excellent (used), Year of construction: 2019, CNC lathe DOOSAN Puma 2600SY II with Siemens control; Thermal sensors for highest precision; Y-axis; Sub-spindle with collet chuck; Spindle bore 80 mm (main spindle); All axes are flat guideways – suitable for heavy-duty machining; Chip conveyor, tool setter, parts catcher with belt, coolant gun, extraction system; 70 bar high-pressure coolant system; Various fixed and driven tool holders. Csdpfx Aksy Amflscsgt

Year of construction: 2008, condition: used, New: No VAT/margin: VAT qualifying Cgsdsy Alt Ujpfx Akcjt

Condition: good (used), Year of construction: 2013, 900mm Swing, 650mm max. machining diameter, 992 mm maximum turning length, 1500rpm spindle, 165mm bar capacity, 10 station turret 45kW spindle motor, FANUC control, 3 Jaw Power Chuck, Tailstock, Swarf Conveyor, Coolant, Codpfjwnfzcex Akcjgt

Condition: good (used), Year of construction: 2006, control FANUC 21i-TB Control x-axis 390 mm z-axis 780 mm spindle taper A2-11 number of spindle speeds 2000rpm Codpfx Asvzln Rjkcjgt engine output 37 kW weight of the machine ca. 9000 kg dimensions of the machine ca. 1905,0 × 2720,0 × 3260,0 m The machine has chucks that can produce gears from 100 to 500 mm. Special chuck is available

Condition: excellent (used), Year of construction: 2016, Traverses XYZ: 1020 x 540 x 510mm, table size 1200 x 540mm, ISO40 spindle taper, spindle speed 12000 rpm, Cedpfx Aoyylzaekcegt Heidenhain Control, spindle motor power 15kW, 30 station ATC with side arm, Through Spindle Coolant, Low Volt Light, Swarf conveyor