Used Doosan Dl 450 for sale (312)

Condition: ready for operation (used), Year of construction: 2018, General Data Measurements width 3480 mm Measurements depth 3850 mm Measurements height 3170 mm Bledjxirgxopfx Ab Tsr Machine weight 13500 kg Control Unit Brand SIEMENS Model 828D Main Drive Spindle speed range 12000 Number of axis 3 Movement X-Axis Movement 1630mm Y-Axis Movement 762mm Z-Axis Movement 650mm Tools Type of tool holder BT40 This 3-axis DOOSAN DNM 750 II was manufactured in 2018, featuring a robust vertical machining centre design. It boasts a large X-axis movement of 1630mm, Y-axis of 762mm, and Z-axis of 650mm. Equipped with a high-speed spindle at 12,000 RPM and a BT40 toolholder, it includes an ATC with 30 positions. Consider the opportunity to buy this DOOSAN DNM 750 II vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 2021, operating hours: 831 h, Equipment: ABS, Doosan DX 55-9C * Dead weight 5.5 t. * Transport length 5.85 m. * Transport width 1.88 m. * Transport height 2.56 m. * Bucket capacity min. 0.18 m³ * Track width 400 mm. Bsdpfx Asullmdsb Tolr * Driver protection Kb. * Reach 6.15 m. * 2 x proportional control * Powertilt with Lehnhoff system * Air conditioning * ZLG 5500 KG * Engine 41 KW 56 HP * Blade support

Condition: good (used), Year of construction: 2008, Brand : DOOSAN Model : MYNX 750 Type : VERTICAL Cnc: FANUC 21 iMB Hours : 7.300 h Table size : 1600 x 750 mm X Travel : 1500 mm Bsdpfx Ajt H Nbujb Tolr Y Travel : 760 mm Z Travel : 650 mm Spindle speed: 12.000 rpm Taper type: BT 40 Number of tools: 30 Equipped with chip conveyor

Condition: good (used), Year of construction: 2012, operating hours: 7,735 h, lifting height: 4,660 mm, fuel type: diesel, mast type: triplex, fork length: 1,200 mm, Year of manufacture: 2012 Lifting capacity: 3.000 kg Bledpfx Aexpg Tmjb Ter Maximum passing height: 215 cm CE mark: yes Technical condition: good Visual appearance: good Please contact Mergim Bricori for more information

Condition: used, TECHNICAL DETAILS - Number of axes : 2 MAIN SPINDLE - Spindle nose : A2-8" - Spindle power : 18.5 [kW] - Spindle speeds : 4000 [rpm] - Max. bar diameter : 76 [mm] - Max. turning diameter : 480 [mm] - Max. machining length : 760 [mm] - Max. diameter on bench : 780 [mm] TURRET Blodpsxcbt Ijfx Ab Tor - Number of positions : 12 - X/Z stroke : 260 x 830 [mm] - Rapid traverse rate : 30 [m/min] POWER SUPPLY - Supply voltage : 220 [V] - Total installed power : 40.72 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3.600 x 1.863 [mm] - Machine height : 1.900 [mm] - Machine weight : 5.500 [kg] MACHINE HOURS - Number of working hours : 19.781 [h] EQUIPMENT - CNC : Fanuc i Series - Coolant tank - Chips conveyor : DROITE - Electric transformer

Condition: excellent (used), power: 44 kW (59.82 HP), fuel type: diesel, color: other, Year of construction: 2014, operating hours: 7,215 h, Equipment: air conditioning, Year of manufacture: 2014 Drive: Track Number of cylinders: 4 Empty weight: 8.600 kg Dimensions (LxBxH): 620 x 230 x 264 cm Engine type: Yanmar 4TNV98C CE mark: yes Technical condition: very good Visual appearance: very good General Country of production: Korea Condition Blsdpfx Ajw U Ndyjb Tsr CE type: CE CW10 Hydraulic quick coupler, Hydraulic tilting bucket, Overpressure system

Condition: ready for operation (used), Year of construction: 2012, operating hours: 37,513 h, General Data Machine weight 9500 kg Main Drive Tool taper BT40 Number of axis 3 Bsdpfx Asxg Ui Djb Telr Movement X-Axis Movement 762 mm Y-Axis Movement 516 mm Z-Axis Movement 570 mm Tools Number of index 40 This 3-axis DOOSAN VC 510 was manufactured in 2012. It features a twin pallet vertical machining centre with a table size of 2 x 860 x 570mm, a maximum workpiece height of 520mm, and a spindle speed of 10,000rpm. It includes a 40 tool ATC, X-axis travel of 762mm, Y-axis travel of 516mm, and Z-axis travel of 570mm. Consider the opportunity to buy this DOOSAN VC 510 vertical machining centre. Contact us for more information. Application Types Milling

Condition: new, Selling price: € 1.000, US$ 1.047 Bucket volume: 2.7 m^3 Shovel Bucket Hydraulic face shovel bucket widely used in the extraction and loading of raw materials in quarries and open-pit mines environments for machines from 80 up to 500 tons. The bucket profile is optimized to achieve the best possible filling factor and shorter material loading and dump time to allow the customer-operator to move more tons per hour at the lowest cost. Blsdpfx Abepa Rn Eo Tsr The convex back‐wall shape increases the potential payload volume and reduces material dump time by increasing productivity. The bucket is equipped with extremely high quality components and structural steels, with a complete and customized wear-resistant package to ensure absolute longevity, reduce maintenance costs and limit downtime. For detailed information, please contact us.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Fanuc, controller model: Oi-MC, workpiece weight (max.): 800 kg, total height: 2,700 mm, total length: 4,080 mm, total width: 2,400 mm, table width: 510 mm, table length: 1,200 mm, table load: 800 kg, overall weight: 7,000 kg, spindle speed (max.): 12,000 rpm, coolant supply: 15 bar, spindle motor power: 15,000 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 30, type of input current: three-phase, Equipment: chip conveyor, rotational speed infinitely variable, Doosan NM510 Vertical Machining Centre Bedpfx Absv Iq Ezs Tolr Machine Type: 3 Axis Vertical Machining Centre Year: 2008 Control: Fanuc Series Oi-MC Condition: Very Good Includes Swarf Conveyor Chiller MCF20 Coolant Filter Autolube 6 x Tool Holders Notes Vice and clamping block in photos not included Technical Specifications Table Size: 1200 x 510mm Table Load: 800kg Travel (X-Axis): 1020mm Travel (Y-Axis): 510mm Travel (Z-Axis): 510mm Max Spindle Speed: 12,000rpm Spindle Power: 18.5/15/11kW Spindle Taper: BT 40 Rapid Traverse (X/Y/Z): 36/36/30m/min Tool Storage Capacity: 30 tools Tool Change Time (T-T/C-C): 1.7/3.5sec Machine Dimensions: 4080 x 2400 x 2700mm Machine Weight: 7,000kg

Condition: used, Year of construction: 2017, Doosan Puma GT3100M year 2017 Year of manufacture: 2017 Control: Fanuc 0i-TF Turning diameter: 376 mm Turning length: 1245 mm Main spindle: Belt-driven spindle Maximum spindle speed: 2800 rpm Bedpfxjxggkto Ab Tslr Maximum power: 22 kW Maximum torque: 1124 Nm Bar capacity: 102 mm 3-jaw chuck, Schunk ROTA THW plus 315-104 12-station turret BMT65 turret head Travel in X/Z axes: 260/1350 mm

Condition: used, TECHNICAL DETAILS - Number of axes : 2 MAIN SPINDLE - Spindle nose : A2-8" - Spindle power : 18.5 [kW] - Spindle speeds : 4000 [rpm] - Max. bar diameter : 76 [mm] - Max. turning diameter : 480 [mm] - Max. machining length : 760 [mm] - Max. diameter on bench : 780 [mm] TURRET - Number of positions : 12 - X/Z stroke : 260 x 830 [mm] - Rapid traverse rate : 30 [m/min] POWER SUPPLY - Supply voltage : 220 [V] - Total installed power : 40.72 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3.600 x 1.863 [mm] - Machine height : 1.900 [mm] - Machine weight : 5.500 [kg] MACHINE HOURS - Number of working hours : 21.818 [h] Blodpfx Aexcbtzeb Tjr EQUIPMENT - CNC : Fanuc i Series - Coolant tank - Chips conveyor : DROITE - Electric transformer

Condition: used, Year of construction: 2023, operating hours: 482 h, load capacity: 3,000 kg, lifting height: 4,900 mm, fuel type: electric, construction height: 2,300 mm, gearing type: automatic, Equipment: head guard, Bobcat D30NXS diesel forklift, year of manufacture: 12/2023, hours: only 482h!, rated load capacity: 3,000kg, fork length: 1,200mm, lift height: 4,900mm, triplex mast, hydraulic side shift, engine: [45.6kW/62HP], weight: 4,901kg, very good condition, immediately ready for use! Blodpfexmmnxox Ab Tor We are happy to provide you with a leasing or financing offer upon request. Mr. Mihm (tel.) will be pleased to assist you. Further information is available on our website. Subject to prior sale and errors!

Condition: ready for operation (used), Year of construction: 2013, operating hours: 29,083 h, General Data Machine weight 9500kg Control Unit Brand FANUC Main Drive Spindle speed range 10000 Tool taper BT40 Number of axis 3 Bsdpfxsxg Ui Re Ab Tjlr Movement X-Axis Movement 762 mm Y-Axis Movement 570 mm Z-Axis Movement 570 mm This 3-axis DOOSAN VC-510 was manufactured in 2013. It features a twin pallet vertical machining center with a table size of 2 x 860 x 570mm, a maximum workpiece height of 520mm, and a spindle speed of 10,000rpm. The machine includes a 40 tool ATC, X-axis travel of 762mm, Y-axis travel of 516mm, and Z-axis travel of 570mm. Consider the opportunity to buy this DOOSAN VC-510 vertical machining center. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 2012, Offered here is a Doosan Puma TT1800SY-GL CNC lathe including portal loader. The machine is in good condition and can be inspected under power in our warehouse. Bodjxmkfhopfx Ab Telr The scope of delivery includes various static tool holders and 4 driven tool holders. The machine will be loaded free onto truck by overhead crane. Make: Doosan Model: Puma TT 1800SY-GL Control: Fanuc 31i Year of manufacture: 2012 Technical Data: Turning diameter (lower and upper turret): 230 mm Turning diameter over bed: 230 mm Turning diameter over slide: 230 mm Recommended turning diameter: 210 mm Chuck size (both spindles): 210 mm/ 8 inch Spindle bore: 65 mm Travel: X1-Z1 (upper turret): 165x700 mm X2-Z2 (lower turret): 190x720 mm Y (upper turret): 100 mm A (sub spindle): 770 mm C-axis: 360° (0.001° increment) Feed rates: X1-X2-Z1-Z2: max. 20 m/min Y: 7.5 m/min A: max. 40 m/min Spindle speeds (both spindles): 6000 rpm Spindle power S1: 22/19.6 kW Spindle power S2: 22/18.5 kW Torque (both spindles): 208 Nm Number of tool stations: 24+24 (lower and upper turret) Rotational speed of driven tools: max. 6,000 rpm Torque driven tools: 5.5/2.2 kW (7.4/3.0 kW) Power consumption: 64.86 kVA Dimensions: 3905x2250x2600 mm (machine only) + portal loader

Condition: as good as new (ex-display), Year of construction: 2016, GANTRY MILLING MACHINE / DOUBLE COLUMN MACHINING CENTER DOOSAN TECHNICAL SPECIFICATIONS – IN GOOD CONDITION and fully operational Brand: Doosan Model: BM 2740 CNC: Fanuc 31 Year: 2016 X: 4000 mm Y: 2700 mm Z: 800 mm Spindle taper: BT50 – 10,000 rpm Tool magazine: 30 positions ATC PRICE AND FURTHER INFORMATION ON REQUEST. Bodpjvnrndofx Ab Telr (CNC, SIEMENS, HASS, LAGUN, FAGOR, CINCINNATI, HEIDENHAIN, MACHINING, PINACHO, MORI SEIKI, MILLING MACHINE, LATHE, GRINDER, BORING MACHINE, PRESS, LASER, SHEAR, PRESS BRAKES)

Condition: good (used), Year of construction: 2012, functionality: fully functional, CNC long turning lathe Doosan Puma St20G Year of manufacture 2012 Bar feeder FMB turbo 3-26 Chip conveyor Blodpfxswtg Dio Ab Ter

Condition: used, TECHNICAL DETAILS - Number of axes : 2 MAIN SPINDLE - Spindle nose : A2-8" - Spindle power : 18.5 [kW] - Spindle speeds : 4000 [rpm] - Max. bar diameter : 76 [mm] - Max. turning diameter : 480 [mm] - Max. machining length : 760 [mm] - Max. diameter on bench : 780 [mm] TURRET - Number of positions : 12 - X/Z stroke : 260 x 830 [mm] - Rapid traverse rate : 30 [m/min] POWER SUPPLY - Supply voltage : 220 [V] - Total installed power : 40.72 [kVA] Blsdpfoxcbtujx Ab Tsr WEIGHT & DIMENSIONS - Machine floor space : 3.600 x 1.863 [mm] - Machine height : 1.900 [mm] - Machine weight : 5.500 [kg] MACHINE HOURS - Number of working hours : 21.725 [h] EQUIPMENT - CNC : Fanuc i Series - Coolant tank - Chips conveyor : DROITE - Electric transformer

Condition: used, Year of construction: 2023, operating hours: 1 h, machine/vehicle number: 20220914013, fuel type: diesel, motor manufacturer: Doosan DP180LA, General information Field of application: Construction Weights Empty weight: 4.800 kg Functional Generator capacity: 630 kVA CE mark: yes Other information Fuel consumption: 94.2 Liter / Hour at 75% Load Generator: Leroy Somer TALA473E Frequency: 50 Voltage: 400 Blodpow Srarofx Ab Tsr Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1000 l Transport dimensions (LxWxH): 4,35x1,8x2,35 Additional information Please contact Tijmen Pesselse, Kenny Bongers, Arjen van Dijk or DPX Power for more information Surplus unused 2023 generator. Only some visible spots of weather wear on the canopy due to outdoor storage on our previous location at Oudenbosch 2 similar units in stock

Year of construction: 2008, condition: ready for operation (used), General Data Measurements width 1900 mm Measurements depth 4200 mm Measurements height 1750 mm Machine weight 4140 kg Control Unit Brand FANUC Main Drive Spindle speed range 4500 Number of axis 2 Movement X-Axis Movement 205 mm Z-Axis Movement 580 mm Workpiece Workpiece drm over bed 550 mm Workpiece drm over support 300 mm Blsdpfx Aboxg Unyj Tor Tools Number of station 12 This 2-axis DOOSAN PUMA 240MB was manufactured in 2008. It features a maximum swing over bed of 550 mm, a bar capacity of 65 mm, and a spindle speed up to 4500 rpm. Equipped with a FANUC i-series CNC, 12-station turret with driven tools, and a chip conveyor. Ideal for precision turning operations. Contact us for more information about this machine. Application Types Turning

Condition: used, Year of construction: 2012, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 650 mm, overall weight: 8,500 kg, spindle speed (max.): 12,000 rpm, spindle nose: ISO 40, number of spindles: 30, Fanuc 32i CNC – Model A SPINDLE: Tool holder taper: ISO 40 Rotation speed: 12.000 rpm AC motor power: 26 kW TRAVELS: X-axis travel: 1.270 mm Y-axis travel: 670 mm Z-axis travel: 625 mm Bljdpfew U Uttsx Ab Tor TABLE: Dimensions: 1.400 x 670 mm Permitted weight: 1,000 kg TOOL CHANGE: Number of tools: 30 Tool dimensions: 80 x 300 mm Maximum tool weight: 8 kg Weight: 8.500 kg Machine complete with: • Instruction manuals and CE declaration

Condition: used, TECHNICAL DETAILS - Number of axes : 2 MAIN SPINDLE - Spindle nose : A2-8" - Spindle power : 18.5 [kW] - Spindle speeds : 4000 [rpm] - Max. bar diameter : 76 [mm] - Max. turning diameter : 480 [mm] - Max. machining length : 760 [mm] - Max. diameter on bench : 780 [mm] TURRET - Number of positions : 12 - X/Z stroke : 260 x 830 [mm] - Rapid traverse rate : 30 [m/min] POWER SUPPLY - Supply voltage : 220 [V] - Total installed power : 40.72 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3.600 x 1.863 [mm] - Machine height : 1.900 [mm] - Machine weight : 5.500 [kg] MACHINE HOURS - Number of working hours : 19.428 [h] EQUIPMENT - CNC : Fanuc i Series Blodpfjxcbtnox Ab Ter - Coolant tank - Chips conveyor : DROITE - Electric transformer

Year of construction: 2007, condition: ready for operation (used), General Data Measurements width 1700 mm Measurements depth 3280 mm Measurements height 1650 mm Machine weight 3500 kg Control Unit Brand FANUC Model Oi-TC Main Drive Spindle speed range 6000 Number of axis 2 Movement X-Axis Movement 175 mm Z-Axis Movement 550 mm Workpiece Workpiece drm over bed 550 mm Workpiece drm over support 300 mm Turret Rotating tools Yes Tools Number of station 12 Media Bljdpoxg Untefx Ab Tsr Chip conveyor Yes This DOOSAN LYNX 220 LMA was manufactured in 2007. A robust horizontal turning machine featuring a maximum swing over bed of 550 mm and a bar capacity of 61 mm. It includes a 12-station turret with driven tools, a spindle speed up to 6000 rpm, and a CNC FANUC Oi-TC. Ideal for precision machining with its comprehensive tooling options and chip conveyor system. Contact us for more information about this machine. Application Types Turning

Condition: used, TECHNICAL DETAILS - Number of axes : 2 MAIN SPINDLE - Spindle nose : A2-8" - Spindle power : 18.5 [kW] - Spindle speeds : 4000 [rpm] - Max. bar diameter : 76 [mm] - Max. turning diameter : 480 [mm] - Max. machining length : 760 [mm] - Max. diameter on bench : 780 [mm] TURRET - Number of positions : 12 - X/Z stroke : 260 x 830 [mm] - Rapid traverse rate : 30 [m/min] POWER SUPPLY - Supply voltage : 220 [V] - Total installed power : 40.72 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3.600 x 1.863 [mm] - Machine height : 1.900 [mm] Blsdpfxexcbtho Ab Tor - Machine weight : 5.500 [kg] MACHINE HOURS - Number of working hours : 21.471 [h] EQUIPMENT - CNC : Fanuc i Series - Coolant tank - Chips conveyor : DROITE - Electric transformer

Condition: ready for operation (used), Year of construction: 2014, operating hours: 28,446 h, Control Unit Brand FANUC Movement Bedoxgv T Depfx Ab Telr X-Axis Movement 762 Y-Axis Movement 516 Z-Axis Movement 570 This 3-axis DOOSAN VC 510 was manufactured in 2014. It features a twin pallet vertical machining center with a table size of 2 x 860 x 570mm, a maximum workpiece height of 520mm, and a spindle speed of 10,000rpm. It includes a 40 tool ATC, X-axis travel of 762mm, Y-axis travel of 516mm, and Z-axis travel of 570mm. Consider the opportunity to buy this DOOSAN VC 510 vertical machining center. Contact us for further details regarding this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2017, Control Unit Brand FANUC Model F0i-F Main Drive Spindle speed range 12000 Tool taper BT 40 Number of axis 4 Additional Equipment Spindle Cooler: Included Preparation for 4th Axis: Pneumatic Clamping Line Torque Monitoring: Tool Monitoring Systems Bsdpfx Absxfmmre Tslr This 4-axis DOOSAN DNM 6700 vertical machining center was manufactured in 2017. Ideal for precision machining, it offers robust construction and reliability. Consider the opportunity to buy this DOOSAN DNM 6700 vertical machining center. Contact us for more information. Application Types Milling