Used Do Edger for sale (6,192)

Condition: used, functionality: fully functional, We have a used Ahlström edger available for sale. It is in full working condition and comes complete with a set of blades/cutters. Kljdpfx Ahjxa Akpj Nel

Condition: excellent (used), Raimann KS 310 BV edger multisaw - year of manufacture 1995 - German production - DTR - two movable discs TECHNICAL PARAMETERS: - track width 340 mm - cutting height max 120 mm - engine power 30 kW - disc diameters 250/360 mm - Possibility to put on a shoe - electric height adjustment - feed continuously adjustable 11-38 m / min - power of the feed motor 1.5 kW - two movable discs - three lasers - max element width 1000 mm Kjdpfoir Eubox Ah Njll - minimum element length 600 mm with a shoe 400 mm - four upper pressure rollers - spindle diameter 65 mm - sleeve diameter 80 mm - spigot diameter 250 mm Dimensions 230x220x230 weight 2500 kg

Condition: excellent (used), Storti RM 500 edger - Italian production - year of production 1993 - electric spacing of discs TECHNICAL PARAMETERS: - cutting width max 435 mm - cutting height max 170 mm - engine power 2 x 22kW - max element width 600 mm - minimum material length 800 mm - max disc diameter 600 mm - spindle diameter 40 mm - two upper pulling rollers - one upper pressure roller - roller motor power 2 x 1.1 kW - roller pressure with automatic jump - seven bottom pulling toothed rollers - electric disc adjustment - two lasers - feed speed 25 and 50 m/min - feeding table 2950 mm - receiving table 3000 mm - drive rollers D100 mm - power of the roller feed motor 2 x 1.5 kW Kedpfx Ahsk Talpj Noll Transport dimensions 500x240x180 cm weight 3500 kg

Condition: excellent (used), Edging line edger with optimization PAUL AB920 - in a warehouse - German production - DTR - optimization of the cutting width - cross cut saw - automatic disc spacing TECHNICAL PARAMETERS: - max. workpiece width 920 mm - max. workpiece height 90 mm - max. workpiece length 6000 mm - main engine power 37 kW - disc diameter max. 300 mm - spindle diameter 60 mm - sleeve diameter 70 mm - fixed sleeve 60 mm long - floating sleeve for 1 disc - floating sleeve with a spindle 100 mm long - number of measuring heads 15 Klsdpsia Nypjfx Ah Nol - spacing of measuring heads 350 mm - distance between the measuring heads - total feeder power 10 kW - cross-cut saw for cutting the material to a length of 2630 mm - saw leveling the material - cascade for transporting the board - hydraulic feed with smooth speed regulation - hydraulic material pressure - hydraulic material height adjustment

Condition: excellent (used), TECNI-ARMENTIA CH-70 edger - hydraulic control - the possibility of programming the width - saving up to 12 programs - centering table TECHNICAL PARAMETERS: Kledpfoidmptex Ah Nol cutting width max. 700 mm cutting height max. 130 mm main engine power 55 kW material width max. 830 mm length of the fixed sleeve 300 mm length of the movable sleeve 100 mm min. material length 700 mm spindle diameter 65 mm sleeve diameter 85 mm disc diameter 350 - 400 mm hydraulically smoothly adjustable feed feed speed up to 38 m / min feeding table 2700 mm roll width 700 mm roll diameter 140 mm centering feeding table two lasers pump motor power 4 kW row of anti-recoil pawls three upper pulling rollers three lower pull rollers hydraulic pressure hydraulic height adjustment dimensions (length / width / height) 480/200/230 cm weight 4000 kg

Condition: excellent (used), Multisaw ZLT 500 edger with 500/120 feeders – Czech production – a movable shield with the possibility of installing several shields TECHNICAL PARAMETERS: cutting width 500 mm cutting height 120 mm min. material length 800 mm max. disc diameter 450 mm one disc movable sleeve 70 mm fixed sleeve length 100 mm engine power 45 kW two upper pressing rollers four lower pulling ones feed smoothly adjustable on the inverter shaft support two rows of pawls max material width 700 mm length of feed rollers 3000 mm roll width 700 mm roll diameter 70 mm receiving table 6200 mm chain width 60mm Kledpfema Dkfjx Ah Nol seven pressure rollers two bottom pull rollers transport dimensions (length / width / height) 700 / 245 / 180 cm weight 3000 kg

Condition: used, Year of construction: 1992, functionality: fully functional, cutting height (max.): 160 mm, saw blade diameter: 500 mm, total length: 7,600 mm, overall weight: 1,500 kg, type of input current: three-phase, input voltage: 400 V, extraction connection diameter: 160 mm, feed length X-axis: 6,000 mm, working height: 160 mm, – year of production 1992 – smooth cutting speed adjustment TECHNICAL PARAMETERS: – cutting length: 6000 mm – max. cutting width: 580 mm Ksdpfjvntdmex Ah Nell – max. cutting height: 160 mm – main engine: 11 kW – max. blade diameter: 500 mm – unit travel speed adjustment – linear laser – quick blade return – power supply: 400V – nozzle diameter: 160 mm – work table dimensions: 1110 x 7300 mm – pawl – hydraulic pump: 4 kW – machine dimensions (length / width / height): 760 / 160 / 210 cm – weight: ~ 1500 kg

Condition: excellent (used), Wood chipper Mario Ferrari L4T2N 400x120 - Italian production - year of production 1992 TECHNICAL PARAMETERS: - inlet width 400 mm - inlet height 120 mm - engine power 45 kW - autoreverse - upper pulling toothed shaft - two lower pulling toothed shafts - conveyor belt 2500 mm Kedpfxjlwqgao Ah Njll - two knives - rotor diameter 400 mm - rotor width 400 mm - power of feed motors 2 x 1.1 kW Transport dimensions 250x170x150 cm weight ~ 1500 kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3500x1950x1500 mm Kedjvz Eh Ropfx Ah Njll Weight 2500 kg Total power requirement 58,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3225x1750x1200 mm Weight 1200 kg Ksdpovz Ezkofx Ah Nell Total power requirement 16,75 kw

Condition: ready for operation (used), Technical characteristics Useful cutting length : 3200 mm Width at rip fence : 550 mm Selectable useful cutting height : 90 mm Blade diameter : 350 mm (max 400 mm) Hydraulic saw unit feed : 60 m / min 7,5 kW motor Power and Motors Kledpjtn H Ezofx Ah Nsl Voltage: 380 V Pluging: Three-phased Power: 7.5 Kw Motor: 10 CV Overall dimensions Lenght: 4500 mm Width: 1200 mm

Condition: ready for operation (used), Technical characteristics Blade diameter: max 350 mm Cutting width: 350 mm Cutting height: 120 mm Feed speed: 6 to 48 m/min Belt width 300 mm Motor 18.5 kW Feed 1.5 kW Belt lubrication Infeed guide 4 pressure rollers Power and Motors Pluging: Three-phased Power: 20 Kw Kljdpfx Ahotqw Uws Nel Motor: 25 CV Overall dimensions

Condition: ready for operation (used), Technical characteristics 2 motors of 132kw Entry width 750mm Maximum dimension between two blades: 600mm Kljdjtn H Ewjpfx Ah Njl Useful height 180mm Blades diameter 580mm Entrance 5,5m for 6m wood Sleeve 230mm right Sleeve 190mm left Blade spacing sleeve/shaft 200mm Mini width 18mm Capacity 150m3 of pieces/day Power and Motors Overall dimensions Weight: 12000 Kg

Condition: ready for operation (used), Technical characteristics Useful cutting length : 4000 mm Width at rip fence : 500 mm Selectable useful cutting height : 170 mm Blade diameter : 400 mm (max 550 mm) Hydraulic saw unit feed : 80 m / min 5,5 kW motor Kljdpfx Ast Rut Reh Nsl Power and Motors Voltage: 380 V Pluging: Three-phased Motor: 10 CV Overall dimensions

Condition: used, Outfeed conveyor after edger - Manufacturer: Soderhamn Eriksson Kodsi Sdk Iopfx Ah Nell

Year of construction: 2020, condition: new, ROMER cabins are equipped with 4 "color touch screen.The cab operation is intuitive, takes place in 3 modes, automatic (time), automatic (based on a clogged filter sensor), or manual.The cabins are fitted with a sensor that queues filters for cleaning when they plug. The system also informs when the filters have already worn out. The electronic system of automatic filter cleaning has a range of adjustment of cleaning frequency and time of firing. Each filter is cleaned separately, and the filters can also be cleaned manually using the buttons. We know from experience that it is difficult for the operator to enforce filter cleaning. Thanks to this system, the operator will not have to think about it anymore. Aluminum fans are very quiet, work at 74-79dB - It's not much. it is difficult to talk even with a standard cabin construction.The cabin, by pulling the sling beams inside the cab, improves the work efficiency, thus relieving the painter, who does not have to move them by hand anymore. ROMER cabins are equipped with 4 "color touch screen.The cab operation is intuitive, takes place in 3 modes, automatic (time), automatic (based on a clogged filter sensor), or manual. Filter clogging sensor The cabins are fitted with a sensor that queues filters for cleaning when they plug. The system also informs when the filters have already worn out Automatic filter cleaning The electronic system of automatic filter cleaning has a range of adjustment of cleaning frequency and time of firing. Each filter is cleaned separately, and the filters can also be cleaned manually using the buttons. We know from experience that it is difficult for the operator to enforce filter cleaning. Thanks to this system, the operator will not have to think about it anymore.Low volume Aluminum fans are very quiet, work at 74-79dB - It's not much. it is difficult to talk even with a standard cabin construction. Broach through the cabin The cabin, by pulling the sling beams inside the cab, improves the work efficiency, thus relieving the painter, who does not have to move them by hand anymore.Automatic filter cleansing ROMER's cabins are equipped with an electronic automatic filter cleaning system. Booth has an adjusted range of cleaning interval, time of the impulse. Each filter can be cleaned individually by using control buttons. We know from experience that it's hard to expect from an operator to clean every single filter entirely. Thanks to this system operator won't have to worry about it anymore. Kljdpfefz Atbex Ah Nsl Booth drive-through chain Thanks to installed drive-through chain there is no need for an operator to drag every element into the booth himself.Elements drive through the booth all on their own which improves the efficiency and allows operator to focus just on the painting part.Regulated air suction In our booths we install an anti-static plate that covers filters. It protects filters from a first wave of a powder. In a well designed booth it also improves the velocity of air moving across the painted element that reaches filters. It improves suction and makes painting easier. Location of a plate can be regulated ROMER's powder booths are fitted with professionally made tanks, which are responsible for the collection of air needed to clean the filter. Compressed air is released from the tank in a fraction of a second while passing through the ROMER JET ™ system expands in the filter at high velocity and escapes through the micro holes in the filter cleaning it, and the

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! Kedjfz U Hvepfx Ah Njll The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Condition: new, Year of construction: 2024, The DESK-9 straight glass edger is an advanced machine designed for precise grinding and polishing of glass edges. With the ability to process glass with a thickness of 3 to 25 mm, the machine is extremely versatile and universal, suitable for various applications in the glass industry. Equipped with nine spindles, it ensures precise and even finishing of each edge, which translates into high quality of finished products. Thanks to its high power and wide range of processing speeds, the DESK-9 edger is able to cope with the most demanding tasks in a short time, which significantly increases work efficiency. The availability of various control options - manual with an LCD display, simple PLC control using a touch screen and PLC with pneumatic pressure on the polishing spindles - allows the machine to be adapted to the specific needs and preferences of the user, ensuring easy and intuitive operation. This machine is also characterized by high durability and solid construction, which guarantees long-term and reliable operation. The DESK-9 edger is the perfect solution for professionals in the glass industry who value precision, efficiency and the ability to adapt the device to individual needs. Available machine variants: 1. DESK-9_LCD: manual control with LCD display (non-touch) 2. DESK-9_PLC: simple control using PLC 3. DESK-9_PLC+PNEUM: simple control using PLC, pneumatic pressure on polishing spindles (on the last spindle and on bends) Advantages of the machine: • Versatility: Possibility to process a wide range of glass thicknesses (3-25mm), which makes the machine universal and adapted to various applications. • Precision: Nine spindles ensure accurate and even grinding and polishing of glass edges. • Efficiency: Thanks to its high power and wide range of processing speeds (0.5 ~ 6m/min), the machine is able to handle even the most demanding tasks in a short time. • Multi-variant: Availability of various control options (manual, PLC, PLC with PNEUMAT) allows the machine to be adapted to the specific needs and preferences of the user. This machine (DESK-9 with PLC control) is available "immediately", it is located in our warehouse in Poland - ul. Cisowa 3, Bilcza 26-026 Morawica | you can arrange a visit to see the machine work "live" Kedpopbbznsfx Ah Njll

Condition: like new (used), Shelf length 3500 mm Shelf width 1300 mm New aluminium shelves 6 hydraulic cylinders Piston diameter 70 mm Water heating Kledpewtz Ucofx Ah Nsl Ground clearance 390 mm Safety rupture link Year 1999 Weight 4400 kg

Condition: excellent (used), functionality: fully functional, Pneumatic material feeding Feed roller width 40 cm Kledpfx Aowhdm Rjh Nol Material feeding from a stack Stack height 84 cm Maximum working width 26 cm Total length 240 cm Width 42 cm Height without stack 83 cm

Condition: excellent (used), functionality: fully functional, overall weight: 10,600 kg, Shelf length 3700mm Shelf width 1300mm Water heating Klsdpfxjwhduzs Ah Nol 10 hydraulic cylinders Piston diameter 100mm Clearance between shelves 260mm Weight - 10600kg Maximum pressure 200 BAR Ability to work on 6 or 10 pistons Possibility of dismantling the middle shelf (Clearance 570mm)

Condition: excellent (used), functionality: fully functional, Pneumatic material feeding Feeder roll width: 40 cm Material fed from a stack Klodpfewgb Amox Ah Njl Stack height: 80 cm Maximum working width: 26 cm Total length: 180 cm Width: 42 cm Height without stack: 78 cm

Condition: ready for operation (used), Pneumatic material feeding Kljdpfowigbasx Ah Nsl Feeder roller width: 40 cm Material feeding from stack Stack height: 84 cm Maximum working width: 26 cm Total length: 240 cm Width: 42 cm Height without stack: 83 cm

Condition: used, Dane techniczne: Szerokość gąsienicy: 350 mm Max wysokość cięcia: 110 mm Max średnica piły: 350 mm Płynna regulacja posuwu Automatyczny system smarujący Ochrona antyodbiciowa Kledjpfarrjpfx Ah Njl Culaga Króciec odciągowy: 200 mm Wyłącznik bezpieczeństwa Zasilanie: 380 V Moc silnika głównego: 25 kW Wymiary całkowite: Długość: 2400 mm Szerokość: 1500 mm Wysokość: 2100 mm

Year of construction: 2023, condition: excellent (used), Hello, I have a 30 butyl ventilation duct profile for sale. I have about 7000 meters Klsdpfx Ahev N H N So Nel