Used Dmg Mori for sale (180)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, turning length: 900 mm, rotational speed (max.): 5,000 rpm, controller model: Siemenes 840D, Equipment: chip conveyor, TECHNICAL DATA Control: Siemens 840D Main spindle speed: 5000 rpm Subspindle speed: 5000 rpm Center distance: 900 mm Travel paths Turret slide 1 (XYZ): 165 / 420 mm, Y: +50 / -30 mm Turret slide 2 (XYZ): 165 / 420 mm Turret slide 3 (XYZ): 165 / 640 mm Turret system Number of turrets: 3 Tool holder: VDI30 Number of driven tools: 12 ATC MACHINE DETAILS Total weight: 10,500 kg Pgsdpfx Adov E Hk Iensw EQUIPMENT - Y-axis - Driven tools - Chip conveyor - Top XF 375 bar loader (BX06121026), built in 2007 Tools and clamping devices are not included

Condition: excellent (used), Year of construction: 2020, operating hours: 537 h, functionality: fully functional, turning length: 1,450 mm, turning diameter: 425 mm, spindle speed (max.): 3,250 rpm, travel distance X-axis: 307 mm, travel distance Y-axis: 60 mm, travel distance Z-axis: 1,240 mm, controller model: DMG MORI SLIMline® Multi-Touch Steuerung, Equipment: documentation/manual, 2-axis universal lathe with C-axis and Y-axis and driven tools TECHNICAL DETAILS Control: Siemens SLIMline multi-touch Swing diameter over bed: 700 mm Swing diameter over slide: 370 mm Max. turning diameter: 425 mm Recommended turning diameter: 320 mm X-axis: 307.5 mm Y-axis: ±60 mm Z1-axis: 1240 mm Spindle distance between main and counter spindle: 1450 mm Main spindle Spindle type: SMW BB-D 255/A2-8" Spindle nose: A2-8" Max. speed: 3,250 rpm Clamping diameter: 255 mm Drive power (40/100%): 33 / 22 kW Torque (40/100%): 630 / 420 Nm Turret Number of tools: 12 Number of driven tools: 12 Holder diameter: 40 mm Tool holder: VDI 40 Number of BT tool positions: 6 Index time 30°: 0.46 s Speed: 4,000 rpm Power: 5.44 kW Torque: 20 Nm Tailstock Type: hydraulic Travel path: 1,200 mm Force: 12 kN Position accuracy: 0.2 mm Centering point size: MK 5 Rapid traverse: 4 m/min Rapid traverse & accuracy Rapid traverse X/Z axis: 30 m/min Rapid traverse Y axis: 22.5 m/min Accuracy X / Y / Z: 10 µm Accuracy C: 10 arc seconds MACHINE DETAILS Connection power: 60 kVA Operating hours: 2,822 h Spindle hours: 537 h Hydraulics Tank: 17 l Pressure: 55 bar Cooling Chip conveyor: 245 l Pump power: 0.85 kW Pump flow: 20 l/min EQUIPMENT - Through hole: D 82 mm - Chip conveyor - Hydraulic hollow clamping cylinder system for up to Ø80 mm bars - Hydraulic tailstock with pedal control - Electronic handwheel - Set with hard and soft clamping jaws Pedpsv D Hnqofx Adnjgw - Collets  - Manual tool measuring probe - DMG Mori Io Tconnector - Documentation Machine has slight transport damage on the side panel on the left (see pictures)

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: NTX26200913, turning length: 1,530 mm, turning diameter: 670 mm, spindle speed (max.): 12,000 rpm, travel distance X-axis: 675 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 40 mm, rotational speed (max.): 4,000 rpm, number of slots in tool magazine: 76, Simultaneous 5-axis machining with direct drive (DDM) in the B-axis HIGHLIGHTS Milling spindle: compactMASTER with the shortest length of 350 mm Machining option: 6-sided complete machining thanks to powerful counter spindle TECHNICAL DETAILS X1-axis travel: 675 mm (+550 / -125 mm) Y1-axis travel: 300 mm (+/-150 mm) Y2-axis travel: +/-40 mm Machining area Maximum machining area: Ø 670 mm x 1,530 mm Control Control type: FANUC F31iB5 with CELOS Operation: CELOS - ERGOline Touch Spindle Main spindle: standard spindle Ø 91 mm, 4,000 rpm Counter spindle: Standard spindle Ø 91 mm, 4,000 rpm Chuck Main spindle chuck: Hollow chuck 10", Ø 254 mm Chuck for counter spindle: KITAGAWA 10" hollow chuck BB210A821 Protection: Double foot switch with protective cover for main and counter spindle Travel control: Automatic travel control of the clamping cylinder for the main spindle and counter spindle Turning-milling spindle Spindle (B-axis): Standard speed 12,000 rpm (FANUC) Tool holder: Capto C6 Positioning: B-axis with 0.0001° accuracy for 5-axis machining Tool turret Type: Turret 2 with tailstock function Equipment: 10-station turret for tool holders attached with screws Milling performance: 6,000 rpm, 40 Nm (turret 2, FANUC) Tool magazine Capacity: 76 tools Tool holder: CAPTO C6 Measuring and monitoring Tool presetting: Manual tool presetting device for main and counter spindle, removable (standard) Distance measuring system: Direct distance measuring system in the X, Y and Z axes of the turning-milling spindle Sensor system: Spindle sensor measuring system with radio signal transmission, Renishaw RMP600 Automation Signal lamp: 4-color (red, yellow, green, blue) Interface: For bar feed device (LNS, IRCO, IEMCA, Edge Technologies, multiple) MACHINE DETAILS Machine dimensions (L x W): 5,825 x 2,830 mm Cooling media and chip disposal Chip conveyor: Ejection on the right, hinged belt + Drum filter Coolant: Use of water-soluble cooling lubricants (emulsion) Pressure: High-pressure coolant system with 70 bar Coolant supply: Through the spindle for the tool spindle and lower turret Filter system: Knoll/Interlit Compressed air system Blow-off system: For chucks on the main and counter spindle Oil mist system Oil mist separator: Extraction opening Ø 200 mm, AFS 1600 Filter and cooling system Pgedpfx Aevt Tu Nsdnow Filter system: INTERLIT TMF300/980 compact filter system, 70 bar Additional pressure: 15 bar for turret II with lifting pump (FANUC/MITSUBISHI) Cooler: INTERLIT auxiliary cooler, 15 kW

Year of construction: 2018, operating hours: 7,879 h, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 8110000014B, A rebuild of the machine took place in 2021: - Change of bar feeder from Chucci to Iemca Next 25-33 - Change of control from Fanuc 30i-B to Fanuc 611 SL IV (Slim Line) - Addition of valve block for hydraulic control of cooling lubricant supply (equipped with 28 controllable valves for high pressure) Pgodpomduh Eofx Adnjw - an electronic parts shuttle for unloading the workpieces was installed - converted to a tool breakage monitoring system Artis / CTM program TECHNICAL DETAILS bar capacity: 36 mm number of main spindles: 6 number of cross slides X-Y axes: 6 C axes: 6 angular resolution: 0,002 ° Rotational speed: 7500 rpm rapid traverse: 40 m/min spindle positioning: 0,1° Drive unit tool speed: max. 13800 rpm MACHINE DETAILS working area: 21,9 sqm (with loader) net weight machine: 15 t chip conveyor: included LUBRICANT DETAILS oil tank volume: 1.800 l total oil volume: 2.000 l 6,3 bar: 140 l/min 45 bar: 100 l/min 80 bar: 50 l/min BAR FEEDER DETAILS Model: Iemca Next 42/33 bar length: max. 3300 mm bar length: min. 2400 mm Loading capacity as area loader: 450 mm bar diameter: 4 - 36 mm Guide channels: 6 fixed + 6 movable (with spindle reduction tubes and bushings)

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 00450000740, turning length: 500 mm, turning diameter: 500 mm, travel distance X-axis: 190 mm, travel distance Y-axis: 40 mm, travel distance Z-axis: 525 mm, mount diameter: 12 mm, rotational speed (max.): 6,000 rpm, TECHNICAL DETAILS Machine type: CNC lathe with C-axis, driven tools and Y-axis Control: Heidenhain Rotation diameter over bed: 500 mm Rotation diameter above the support: 290 mm Turning diameter for shafts: 200 mm Turning length: max. 500 mm Travel X: 190 mm Travel Y: ±40 mm Z travel: 525 mm Rapid traverse X/Z: 30 m/min Rapid traverse Y: 22 m/min Spindle nose: 150h5 Diameter of the spindle bearing: 100 mm Bar capacity: 51 mm Drive power: 20/27 kW Spindle speed (max.): 6,000 rpm Spindle torque (max.): 170 Nm C-axis: 0.001° Chuck diameter: 210 mm Tool turret Positions: 12 Driven tool positions: 12 Tool holder: VDI 30 Power of the tool drive: 5.4 kW Tool speeds: max. 5,000 rpm Tool torque: max. 18 Nm Pgjdpfovgcrdox Adnew Automatic tailstock travel: 550 mm Machine weight: max. 4,650 kg EQUIPMENT - C-axis and driven tools for versatile machining options. - Y-axis for carrying out off-center milling and drilling work. - 12-position tool turret with static and driven tool holders. - Automatic tailstock for efficient workpiece support. - Chip conveyor for removing machining chips. - Dust extraction for clean operating conditions. - Tool measuring arm for precise tool measurement. - Complete documentation included.