Used Dmg Dmc 635 V for sale (408)

Condition: used, Year of construction: 2005, operating hours: 48,000 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, Equipment: chip conveyor, rotational speed infinitely variable, DMG DMU50, year 2005 5-axis machining center 3 + 2 axes (not simultaneous) Heidenhain iTNC 530 Spindle speed up to 10,000 rpm 30-position tool changer SK40 DIN69871 Chip conveyor Heidenhain infrared 3D probe Without vise Godpfxsv U R Iie Afiouh The machine can be inspected at our facility.

Condition: used, Year of construction: 2013, controller manufacturer: Siemens, controller model: 840 Dsl, _____ Description: Year of manuf. : 2013 Control : Siemens 840 Dsl Turning diam. : 340 mm Turning length : 1185 mm In General: Year of manufacture:2013 Control system:Siemens 840 Dsl Turning length:1,185 Swing diameter:540 mm Bar capacity:75 Main spindle: Technology:Direct drive spindle Speed:5,000 rpm Max. power:32 kW Max. torque:360 Nm Chuck:SMW KNCS -N 260-78 C-axis:0.001° Flush:Chuck flush Sub spindle: Technology:Direct drive spindle Speed:5,000 rpm Max. power:32 kW Max. torque:360 Nm Chuck:SMW KNCS -N 260-78 C-axis:0.001° Flush:Chuck flush + flush through spindle Tool carrier I (X/Y/Z/B): Technology:Milling spindle on traveling column Milling spindle speed:12,000 rpm Max. power:22 kW Tool holder:Capto C6 X-axis:450 mm Y-axis:200 mm Z-axis:1,200 mm B-axis:+/- 110° Position sensors:Direct scales (glass scales) Tool carrier II (X/Y/Z): Technology:Tool turret on cross slide Tool drive:Direct drive Speed:10,000 rpm Power:14 kW Torque:34 Nm X-axis:195 mm Y-axis:80 mm Z-axis:1,200 mm Tool holder:VDI 40 Number of tool stations:12 Automation: Technology:Portal loader with stacking magazine Workpiece diameter:50 - 200 mm Max. workpiece height:230 mm Max. workpiece weight:15 kg Number of stacking attachments:20 Max. load capacity per stacking attachment:40 kg Equipment: Gjdsxl Nfqopfx Afiouh Chip disposal:Chip conveyor Coolant supply:Internal coolant system, 80 bar Tool magazine:Chain magazine, 120 stations Workpiece measurement:Renishaw touch probe Tool breakage monitoring:Swivel wire Automation:Portal loader with stacking magazine Emulsion mist separator:Mechanical Setup operation:Electronic handwheel Workspace door:Automatic Chuck:2x SMW KNCS 260 Tool holders:Various Capto C6 holders

Condition: ready for operation (used), Year of construction: 2021, Control Unit Brand HEIDENHAIN Model iTNC530 HSCI Main Drive Spindle speed range 20-28000 rpm Spindle motor power 55/43.5 kW (40/100%DC) Movement X-Axis Movement 1050 Y-Axis Movement 800 Z-Axis Movement 560 Gjdpfsxl H Enox Afiouh Additional Equipment Tool Taper: HSK-A63 DIN 69893 / Tool Magazine: 30-position disk tool magazine, 60-position pickup chain type Scraper Belt Chip Conveyor and Machine Bed Flushing / Separate Water Treatment Unit: 980-liter tank and paper filter / Pump: 40 bar / 23 l/min for internal cooling through spindle / Extended Chip Flushing / Rotating Inspection Window / Manual Coolant Flushing Gun / Internal Compressed Air Cooling: Through spindle / EROWA Pallet Handling System Preparation Documentation: English, Hungarian / Display Text: German/Hungarian / Screen Text: German/Hungarian DMG MORI Monitoring: D-ME406* DMG MORI Messenger V4 / DMG MORI Software Solutions: DMG MORI Service Agent, DMG MORI NETSERVICE, DMG MORI IoTconnector This 5-axis DMG MORI HSC 105 universal machining center was manufactured in 2021. It offers advanced capabilities for precision machining. Consider the opportunity to buy this DMG MORI HSC 105 universal machining center. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 2016, operating hours: 26,678 h, functionality: fully functional, This machine is available exclusively through Montrasio GmbH and is being sold on behalf of the authorized parties. DMG DMU 100P duoBLOCK – 5-Axis CNC Machining Centre (2016) Year of manufacture: 2016 Control: SIEMENS CELOS Godpfxjxl Arke Afieuh Travel / Capacities X-axis: 1,000 mm Y-axis: 1,250 mm Z-axis: 1,000 mm Workpiece diameter: 1,100 mm Workpiece height: 1,600 mm Workpiece weight: up to 2,200 kg Table / Axes Table size: 1,100 × 900 mm Table rotation speed: 35 rpm Max. table load: 2,223 kg B-axis universal milling head swiveling range: −30° to +180° Spindle / Tool Spindle speed: 0 – 12,000 rpm Spindle motor power: approx. 69 HP (≈ 51.5 kW) Spindle taper: HSK-A100 Tool magazine: 63 positions Machine Dimensions Footprint: approx. 24 m² Machine height: approx. 3,606 mm Machine weight: approx. 24,540 kg Accessories / Equipment CNC-controlled universal milling head (B-axis) Workpiece probe Tool measurement system 3D Quickset Chip conveyor

Condition: used, Year of construction: 2011, DMF360 Base Machine Gantry Milling Machine X3600 Y1100 Z900mm Siemens 840D solutionline Fixed Table 4200 x 1100 mm Equipment / Accessories Godpfx Afexnqf Reiouh Built-in rotary table ø1050mm Swivel head as B-axis 20-18000 rpm Dynamic package X-Axis 80m/min Work area partition Measuring probe, laser tool measurement, tool breakage detection Electronic handwheel Blow air through spindle center Coolant supply 40/80 bar with band filter system, 1000 L tank Chip flushing and rinse gun Chip conveyor, discharge height 1250mm Air conditioning unit for drive and control cabinet Automatic doors A-Axis Lehmann EA420, right-side preparation Hydraulic clamping for fixed and rotary table Robot interface with contact pressure monitoring Interpolated turning High-speed settings Compcad – compressor function 3D machining, 3D tool correction Shutdown and automatic machine start Oil and emulsion mist extraction system

Condition: excellent (used), Year of construction: 2014, 3-axis CNC lathe Brand: DMG MORI Model: CTX 650 ecoline V3 Year: 2014 CNC: Siemens 840 DSL with ShopTurn Technical Specifications: Max. turning diameter: 600 mm Max. swing diameter: 800 mm Max. machining length: 1100 mm Bar capacity: 102 mm Guodpfoxnpw Ssx Afioh Main spindle speed: 2200 rpm Motor power: 42 kW 2850 Nm VDI 50 turret: 12 stations (6 driven) Machine dimensions: 4900 x 2300 x 2020 mm Machine weight: 9000 kg Options: C axis 0.001° Driven tools 500 mm hydraulic chuck 12-station turret MARPOSS tool measuring arm Chip conveyor

Condition: good (used), Year of construction: 2007, functionality: fully functional, Technical details x-travel 1150 mm y-travel 710 mm z-travel 710 mm Gsdpfew I A Ekex Afiouh table surface area 1500 x 800 mm table load 800 kg tool taper SK 40 spindle turning speed - stepless 20 - 12000 U/min feeds -stepless- 0 - 30000 mm/min main drive motor 15 / 10 kW Additional information 5-Axis Universal Machining Center Equipment: CNC-control HEIDENHAIN iTNC 530 (5-axis simultaneous) NC rotary table (4th-axis), diameter 800 mm, integrated into the fixed table Controlled milling head (B-axis), swivel range -120/+30 deg. ATC 32-positions (2 x 16) Chip conveyor Coolant system for external cooling, no internal cooling

Condition: ready for operation (used), Year of construction: 2000, Make: DMG Type of machine: DMU 50 Evolution Year of manufacture: 2000 Control system: Heidenhain iTNC 360 Machine's weight: 6000 kg Guedexnphdspfx Afieh Tool holder: SK 40 x-travel: 500 mm y-travel: 420 mm z-travel: 380 mm Speed range: 12.000 U/min Overall dimensions: 3360 x 2550 x 2600 mm Number of tools in the magazine: 30 Pl. : x

Condition: ready for operation (used), Year of construction: 2022, operating hours: 123 h, Control Unit Brand SIEMENS Model SINUMERIK One 828D Main Drive Spindle speed range 12000 Movement X-Axis Movement 550 Y-Axis Movement 550 Gujdexl H Hxepfx Afieh Z-Axis Movement 510 Table Outer length 850 mm Outer width 650 mm Table load 600 kg Tools Slots in storage 24 Additional Equipment Automation interface with 6-axis robot, high dynamics Siemens PLC and HMI with safety module IDS industrial camera with Halcon Vision integration This 3-axis DMG M1 vertical machining center was manufactured in 2022. It features a Siemens SINUMERIK One 828D control, a spindle speed of 12,000 rpm, and a table size of 850 x 650 mm supporting up to 600 kg. Equipped with a 24-place tool changer and both internal and external cooling systems, it ensures precise milling operations. If you are looking to get high-quality milling capabilities consider the DMG M1 machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2022, DMG Mori NH5000DCG Horizontal Twin Pallet Machining Centre. S/No. NH503211202 (2022) with F31iB Control, Full B Axis (0.001 deg), Travel X/Y/Z = 730/730/850mm, Rapids X/Y/Z = 50 m/min, Pallet Size 500 x 500mm, 120 Position ATC, Spindle Speed 14,000rpm, Spindle Taper BT40, Magazine Tool Breakage Detection, Hydrajet MS30-1000 High Pressure Coolant, Through Spindle Coolant, Floor Standing Filtermist FX4002 Unit, Swarf Conveyor. Country of Origin: Japan Guodpfx Ajxnlf Sofieh Location: This lot is located in Tamworth, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, controller manufacturer: Siemens, total height: 2,800 mm, total length: 2,230 mm, total width: 2,665 mm, table width: 650 mm, table length: 850 mm, overall weight: 6,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 1,377 h, coolant supply: 20 bar, number of spindles: 1, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The machine is in as-new condition and available for immediate delivery. 3-axis geometry is within manufacturer tolerances. The main spindle runs smoothly and is in as-new condition with 0.003 mm runout. Retention force is also good at 8 kN. Lubrication and hydraulic oils have been replaced. All functions have been tested. Of course, the machine can be inspected and tested on site. Transport and installation are available at extra cost and by arrangement. The machine is equipped with all options available on an M1. Guedpfowytmkex Afijh Chip conveyor / coolant system / internal coolant 20 bar / air through spindle center Manual wash gun Renishaw OMP 60 probe TS27 tool measurement Machine hours: 14,150 hours / automatic mode: 1,377 hours, mostly aluminium machining.

Condition: used, Year of construction: 2008, x-travel 500 mm y-travel 450 mm Gusdpjxluf Asfx Afieh z-travel 400 mm Control HEIDENHAIN iTNC 530 Table dimensions 500 x 380 mm table weight 500 Kg c-axis 0.001º ( ± 360º) 0 b-axis 180 ° rapid traverse X-axis 80 m/min feeds 50 m/min spindle turning speed range 18.000 U/min spindle taper BT- 40 spindle drive 30 kW Internal cooling system 40 bar handwheel HEIDENHAIN HR-410 total power requirement 50 kVA weight of the machine ca. 6,5 t

Condition: excellent (used), Year of construction: 2024, operating hours: 2,111 h, travel distance X-axis: 800 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, table width: 1,100 mm, table length: 560 mm, rotational speed (max.): 12,000 rpm, Vertical Machining Center DMG MORI CMX800V YEAR 2024 FANUC-0iMF Table: 1100x560mm, X800 Y560 Z510mm 12,000 rpm, BT40, ATC30 Gujdpfexgcubjx Afish

Condition: ready for operation (used), Year of construction: 2007, Make: DMG Type of machine: Nef 600 Year of manufacture: 2007 Control system: Fanuc 210 is Machine's weight: 5,5 t Tool holder: VDI 40 x-travel: 320 mm z-travel: 1250 mm Speed range: 3000 U/min Cutting diameter: 600 mm Turning length: 1250 mm Overall dimensions: 4000 x 2200 x 2000 mm Tool turret - slots: 8 Pl. Gjdjxnpbqepfx Afieuh Spindle opening: 90 mm

Year of construction: 2019, operating hours: 6,143 h, condition: ready for operation (used), General Data Machine weight 7200 kg Gjdpfxjxl H A Hj Afijuh Control Unit Brand SIEMENS Model SINUMERIK 840 D solutionline Main Drive Number of axis 3 This DMG MORI CLX 550 V6 was manufactured in 2019. A horizontal turning machine featuring a 3-axis universal lathe with driven tools, C-axis, Y-axis, and a counter spindle. It includes a 24-position tool carrier. With 6,143 operating hours and 2,699 spindle hours, it weighs 7200 kg. If you are looking to get high quality turning capabilities consider the DMG MORI CLX 550 V6 machine we have for sale. Contact us for more information. Application Types Turning

Condition: used, 2 CNC turning-milling centers CTX 410 - YOM 2005 and 2007 Heidenhain Plus IT control - 3-jaw chuck - driven tool stations Gjdpfx Aexlthvofisuh - tailstock - chip conveyor - coolant tank

Condition: used, Year of construction: 2015, Accessories: The machine can be inspected. - Sale without extraction system! Gusdpfxoxnbgfs Afijh - KM unit (see pictures) - Sale without tools Dismantling and loading by the seller, transport by the buyer. Sale only within the EU.

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, control type: CNC control, controller manufacturer: Siemens, DMG Mori Seiki LaserTec 50 FineCutting Sauer Laser Machine Year of manufacture: 2010 Control: Siemens 840 D Power Technical Data Max. travel X-axis: 540 mm Max. travel Y-axis: 500 mm Max. travel Z-axis: 700 mm 5-axis laser precision machine for processing diamond tools up to Ø 355 mm and 420 mm in length • Linear drives in X/Y with acceleration > 1 g • High-dynamic torque motors in both rotary axes (B and C axes) • Compact machine design with only 4 m² footprint + Keller extraction system Godpfoxllfaox Afijuh

Year of construction: 2020, condition: ready for operation (used), Control Unit Brand SIEMENS Godpfx Afsxl H Ayoiouh Model I SLIMline® avec écran multi-tactile (19/ Operate sur SIEMENS) Main Drive Number of axis 3 This 3-axis DMG MORI CLX 550 V4 was manufactured in 2020. It features a universal lathe with driven tools, a C axis, and a Y axis. Key specs include a 12-station VDI40 turret, a main spindle with a 3,250 rpm and 22/33 kW power, and a hydraulic 3-jaw chuck. Ideal for high precision turning, this machine also comes equipped with a DMG MORI SLIMline® control panel. If you are looking to get high-quality turning capabilities consider the DMG MORI CLX 550 V4 machine we have for sale. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2022, operating hours: 8,574 h, General Data Machine weight 9200 kg Control Unit Brand SIEMENS Main Drive Spindle speed range 5000 Number of axis 5 Movement X-Axis Movement 750 mm Y-Axis Movement 200 mm Z-Axis Movement 1100 mm Workpiece Workpiece drm 400 mm Gusdpfx Aoxlvahjfioh This 5-axis DMG MORI CLX 450 TC was manufactured in 2022, featuring a max. X-axis stroke of 750 mm, Y-axis stroke of 200 mm, and Z-axis stroke of 1,100 mm. It handles a max. workpiece diameter of 400 mm and length of 1,100 mm, with a bar capacity of 65 mm. Spindle speeds reach up to 5000 rpm. Weighs 9200 kg. If you are looking to get high quality turning capabilities consider the DMG MORI CLX 450 TC machine we have for tact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2019, Control Unit Brand MITSUBISHI Model M730UM with CELOS Main Drive Number of axis 4 Additional Equipment Full-closed loop control for x-axis Workpiece unloader including belt Guedpfoxlvb Ssx Afioh Automatic door Robot interface Bar Feeder interface 10 external M-codes Transformer Alternating speed option // High speed canned cycle option Island, open pockets option Addition of optional block skip option This 4-axis DMG MORI NLX 2500 SY / 700 was manufactured in 2019, featuring a Sauter turret capable of 10,000 rpm, dual spindle tailstock, high-pressure coolant system, and full-closed loop control for the X-axis. It includes interfaces for robots and bar feeders, enhancing automation and productivity. Consider the opportunity to buy this DMG MORI NLX 2500 SY / 700 turn-mill center. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2016, operating hours: 18,071 h, General Data Machine weight 6000 kg Main Drive Number of axis 3 Media Guodpfx Aexlvc Nofieh Main electronic connection 40 kVA Additional Equipment shopturn option This 3-axis DMG MORI Gildemeister CTV 250 2nd was manufactured in 2016. Ideal for precision vertical turning, this machine maintains robust construction and reliability. If you are looking to get high-quality turning capabilities, consider the DMG MORI Gildemeister CTV 250 2nd machine we have for sale. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2010, operating hours: 23,676 h, General Data Measurements width 1530 mm Measurements depth 1775 mm Measurements height 2253 mm Machine weight 1800 kg Control Unit Brand SIEMENS Model Sinumerik 840D SL Main Drive Spindle speed range 40000 rpm Number of axis 5 Movement X-Axis Movement 120 mm Y-Axis Movement 120 mm Z-Axis Movement 200 mm A-Axis Movement -15° to 120° Gjdpfxoxlvdge Afieuh C-Axis Movement 360° Table Table load 5 kg Tools Type of tool holder HSK-25 Media Power consumption 25 kVA Additional Equipment Accessories: Ultrasonic PowerShrink This 5-axis DMG SAUER ULTRASONIC 10 Sauer was manufactured in 2010, offering advanced capabilities in a vertical machining centre format. Ideal for complex geometries and precision parts, this machine represents a significant asset for any machining operation. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2003, operating hours: 24,243 h, Control Unit Brand HEIDENHAIN Model TNC 530 Guedoxllpropfx Afioh Main Drive Number of axis 4 Tools Number of index 100 Type of tool holder HSK 63 Additional Equipment 40 bar IKZ This 4-axis DMG DECKEL MAHO DMF 300 was manufactured in 2003. It features a vertical machining center with 100 ATC tools, HSK 63, and a 40 bar IKZ. Consider the opportunity to buy this DMG DECKEL MAHO DMF 300 vertical machining center. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2017, operating hours: 29,532 h, General Data Machine weight 27750 kg Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Spindle speed range 10000 Tool taper ISO 50 Number of axis 5 Gujdpfx Afexllmdsioh Movement X-Axis Movement 2600 mm Y-Axis Movement 1100 mm Z-Axis Movement 900 mm Table Table load 4000 kg This 5-axis DMG MORI DMF 260-11 Linear was manufactured in 2017. It features a large table (3200 mm x 1100 mm), high load capacity (4000 kg), and extensive axis travel (X: 2600 mm, Y: 1100 mm, Z: 900 mm). With a spindle speed up to 10,000 rpm and a 60-pocket tool magazine, it's ideal for complex machining tasks. If you are looking to get high-quality milling capabilities consider the DMG MORI DMF 260-11 Linear machine we have for sale. Contact us for more information. Application Types Milling