Used Dmc Unisand 2000 for sale (33)

Condition: excellent (used), Wide belt sander for calibration and fine sanding Hnedpstwzyfsfx Agtet Working width 1100 mm Min. / max. workpiece height 3 - 120 mm Feed motor power 0.8 kW Sanding belt speed 18 m/sec Sanding belt dimensions 1115 x 2620 mm Feed speed 4.5 / 9 m/ min Suction connection 3 x 160 mm Compressed air connection 6 bar 1st unit Sanding roller rubber-coated 90 Sh Motor power 11 kW 2nd unit Combi unit Rubber-coated sanding drum 60 Sh Sanding pad, rigid Motor power 11 kW 3. cleaning brush unit Automatic workpiece thickness adjustment at infeed with digital workpiece thickness display Table extension in the outfeed Dimensions approx. L x W x H = 2291 x 1784 x 2350 mm Weight approx. 3000 kg Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: like new (used), Year of construction: 2011, DMC USK 1350 M3 wide-belt sander Hnodpfx Agjgr Er Setot - Italian production - transverse aggregate so-called sergeant - year of production 2011 - electric and pneumatic ionizer TECHNICAL PARAMETERS: grinding width 1350 mm grinding height 4-170 mm minimum workpiece length 365 mm vacum table 1 aggregate: transverse tape, the so-called sergeant engine power 12 kW 2nd aggregate: rubber shaft hardness of 95 shore diameter 240 mm engine power 18.5 kW 3rd aggregate: rubber shaft hardness of 55 shore shaft diameter 300 mm engine power 15 kW 4 aggregate: pneumatic shoe engine power 15 kW 5 aggregate - cleaning brush - 2.2 kW 6 aggregate - blowing blowing on the tape pneumatic oscillation feed speed 2.5 - 18 m / min pneumatic straps tension electric height adjustment spigots diameter 3 x 200 mm, 8 x 80 mm, 2 x 160 mm, 1 x 150 mm transport dimensions (length / width / height) 370/250/250 cm weight 5000 kg

Condition: used, Year of construction: 1998, functionality: fully functional, DMC Polisand 110 RP Wide Belt Sander Year 1998 Paint Wide Belt Sander Total installed power approx. 23 kW Sanding width 1100 mm Workpiece thickness up to approx. 170 mm Motorized height positioning with digital reading device Vacuum conveyor belt, F,LLI FERRARI vacuum unit with 4 kW motor power Feed motor power 1.50 kW Unit 1: Grooved rubber sanding roller, with 8.8 kW blower Unit 2: Sanding pad, with 15 kW blower 380 V / 50 Hz Hedpfev Ivuusx Agtsnt Weight 2300 kg Dimensions: 2.45 m x 1.85 m x 2.0 m

Condition: good (used), Year of construction: 2001, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, For sale is a machining center with Gentry design of the DMC brand and type 65V linear Particularly noteworthy is the high-speed spindle with 18,000 rpm The machine is in good condition and fully functional Technical data Commissioning: 2001 Control: Heidenhain TNC 430 i Table size: 850x600 mm Tool holder: SK 40 Tool changer: 30-fold Travel X/Y/Z: 650x500x500 mm Max. speed: 18,000 1/min Feed rate max: 60 m/min Dimensions lxwxh: 2650x2700x2500 mm Weight: 10,500 kg On request, for an extra charge, dismantling, loading & transport can be organized for you throughout Europe Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale BUYING / SELLING PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website Hsdpjt I Tplsfx Agtent

Condition: ready for operation (used), Year of construction: 1981, functionality: fully functional, Brand: DMC Model: Europa 90 Year of manufacture: 1981 Tech. info: Roller abrasive belt motor: 15 HP - 2 poles Pad abrasive belt motor: 7,5 HP - 2 poles Conveyor belt motor: 1,5/0,8 - 4/8 poles Two feeding speeds: 7-14 m/min Roller abrasive belt speed: 21 m/sec Pad abrasive belt speed: 10 m/sec Roller abrasive belt length: 2200 mm Pad abrasive belt length: 2200 mm Roller and pad abrasive belt width: 950 mm Hodpfx Ajrbyrpegtent Max. size of work-piece: 900 x ≠100 x > 200 mm Min. size of work-piece: 40 x ≠ 2 x 200 mm Min. operating pressure: 5,5 Atm Compressed air consumption: 300 l/min Diameter of suction hood (roller belt): 200 mm Diameter of suction hood (pad belt): 200 mm Average speed of dust exhaust system: 25-30 m/sec volume of sucked air (roller belt hood): 3150 cu.m/h Volume of sucked air (pad belt hood): 3150 cu.m/h Overall size: 1675x1625xh=2096 mm Weight: 2030 kg Weight of the machine without pad: 1630 kg Stock no: 2001933

Condition: new, Wide belt sanding machine for calibrating and fine sanding Working width mm 1,100 Min/ Max. working height mm 4/ 170 Sanding belt width mm 1,115 Hsdpfx Aeitvkusgtsnt Sanding belt length mm 2,150 Gear motor kW 2.2 Feed speed m/min variable Infeed and outfeed support rollers for long and short workpieces Oscillating belt cleaning 1st unit Oscillating belt cleaning 2nd unit Oscillating belt cleaning 3rd aggregate 10” touch screen control panel “eye-S” 1. Aggregate steel roller 2. Aggregate rubberized calibrating roller 85SH 3. Aggregate combi-aggregate pneumatic seg. sanding pad /rubberized sanding roller 35 SH Motore power 1st unit kW 18.5 Motor powert 2nd & 3rd aggregate kW 18.5 Version "B" for RRCS with: Pneumatic switching on and off 1st aggregate Pneumatic switching on and off 2nd aggregate Pneumatic switching on and off 3rd aggregate "MESAR" with elastic segmented sanding pad Pneumatic switching on and off of the sanding pad unit electronic adjustment of the working height SPECIAL PRICE! IMMEDIATELY AVAILABLE

Condition: new, Technical data: Working width mm 1,350 Min./max. working height mm 4 - 170 Sanding belt width/length mm 1,370/2,620 Main motor power kW 18.5 with inverter Feed speed, variable m/min 3.5 - 18 Working units: 1. Unit: "RA" diagonally ribbed contact roller, Sh 86, diameter 160 mm 2. Unit: Combi: Hnjdpfshtuvrsx Agtet rubber-coated sanding roller, diameter 160 mm, 45 Sh Elastic electronic segmented sanding pad "MESAR" with 24 segments Version C: - Elastic electronic segmented sanding pad "MESAR" complete with: - Pneumatic cylinder (on/off) for the automatic raising and lowering of the sanding roller/sanding pad unit - Activation of the sectors via the electronic control system, which synchronizes their engagement with the feed speed and controls the number based on the workpiece geometry, and enables the selection of more or fewer sectors to the left and right of the workpiece. Version 135: "MESAR 24" with 24 segments, segment width 55 mm, complete with B/24 workpiece sensing strip at the infeed Additional equipment: Roller table at the infeed and outfeed for long workpieces Perforated table and conveyor belt Vacuum table with electric fan 4 kW (5.5 hp) integrated into the machine frame Oscillating blow-off device, 2nd unit Touch screen 10.4" display with 'eye S software integration' ATTENTION: IMAGES are EXAMPLE IMAGES of a SIMILAR SD70!

Condition: new, DMC SD 90 RCS 135 "C-Plus" version Technical specifications: Useful working width mm 1350 min/max Working height (with fixed table) mm 4 – 200 Abrasive belts mm 1,370 x 2,620 Feed speed m/min 3.5-18 Hsdpfx Ajd E Ixzjgtjnt working aggregates: “MESAR 46” 46 sectors (30 mm) flexible electronic link sanding pad complete with B/46 workpiece sensing bar in the infeed • 1st position: "RA" diagonally ribbed steel contact roller D=250 • 2nd position: COMBI with rubber-coated grinding roller D=175 mm 65 Sh • Floating pressure shoe in 1st position with pneumatic adjustment • 2 grooved rubber coated pressure rollers 2nd and 3rd position • Oscillating blow-off device 1st and 2nd unit • Workpiece cleaning unit with rotating blast nozzles • Motor 1st unit 18.5 kW • Motor 2 with inverter 15 kW Table: • Fixed table working height 900 mm • Infeed roller table for long workpieces • Outfeed roller table for long workpieces • Perforated table and transport carpet 50 Sh • Vacuum table with 4 kW electric fan integrated in the machine frame • Stepless carpet feed from 3.5-18 m/min (gear motor 0.75 kW) Control: • Electronic programming unit "Pro-Sand" • Touch screen 10.4" screen • Door with viewing window on set-up side for machine with 2 working units • LED interior lighting Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)