Used Distillery Plant for sale (2,993)

Year of construction: 2025, condition: new, functionality: fully functional, A cement clinker grinding mill is a specialized equipment used to grind the hard nodular clinker into fine powder, which is cement. Most cement is currently ground in ball mills and also vertical roller mills, which are more effective than ball mills. Here are key features and information about cement clinker grinding mills: 1. Raw Materials: Hedpfoq Nfbhsx Afionu - The main raw material for making cement is clinker, which is produced by sintering limestone and clay. Other materials such as gypsum, fly ash, or slag may also be added during the grinding process to achieve specific properties. 2. Grinding Process: - The clinker and other additives are finely ground in the grinding mill to produce cement. The grinding process is a crucial step in cement production and contributes significantly to the final quality of the product. 3. Types of Mills: - Ball Mills: Traditional ball mills are commonly used for grinding clinker. They operate by rotating a cylinder with steel grinding balls, causing the balls to fall back into the cylinder and onto the material to be ground. - Vertical Roller Mills (VRM): VRM technology has become increasingly popular for clinker grinding. These mills use a rotating table with rollers to crush and grind the clinker, providing energy efficiency and a smaller footprint compared to ball mills. 4. Gypsum Addition: - Gypsum is often added during the grinding process to control the setting time of the cement. It prevents flash setting of the clinker and facilitates the formation of a workable and pumpable cement paste. 5. Quality Control: - Quality control measures, such as monitoring the fineness of the cement, chemical composition, and other properties, are implemented during the grinding process to ensure the final product meets the required specifications and standards. 6. Clinker Cooling: - Before grinding, the clinker is produced by heating the raw materials in a kiln. The clinker is then cooled before entering the grinding mill to prevent excessive heat build-up during grinding. 7. Dust Collection and Environmental Considerations: - Dust collectors and air pollution control systems are often employed to capture and control the dust generated during the grinding process, addressing environmental and safety concerns. 8. Packaging and Storage: - After grinding, the cement is typically stored in silos before being packaged in bags or dispatched in bulk for distribution to construction sites or for sale in the market. Cement clinker grinding mills play a crucial role in the cement production process, and advancements in technology continue to improve the efficiency and environmental sustainability of the grinding process.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Mecatherm Baguette Line Hnodpsxn Iruefx Afiju Brand: MECATHERM – Model: TRADIVIDER RT II * Dough dividing from 200 g to 1000 g * Output up to 1700 kg/h for highly hydrated doughs and long proofing times Dough divider hopper – Capacity: 250 kg for pre-portioning of 15 kg Divider – Brand: MECATHERM – TRADIVIDER Type 32/16, including: * 1 sorting hopper – Capacity: 300 liters * 1 multi-piston dividing chamber on a swing frame * 1 swing frame drive system * 1 pin-type dough gripper * 1 dough piece receiving conveyor * 1 discharge conveyor * Dividing range: 200/400 g with 32 pistons – Capacity: 1360 kg dough per hour * Dividing range: 350/1000 g with 16 pistons – Capacity: 1700 kg dough per hour Electrical equipment Dusting machine * Complete flour dusting of the dough with reclamation of excess flour Intermediate Proofing and Resting Block Brand: MECATHERM – Model: RTH, including: * 1 inclined conveyor – Width: 400 mm with curve and discharge belt on the first level * 1 automatic station for pre-proofing, moulding, scoring, elongating, and depositing on honeycomb trays * At the end of the conveyor: 1 6-tray stacker with grissini to enhance operator efficiency * Mesh return conveyor under the RT block Output for long loaves and baguettes: up to 2,500 loaves per hour; for small breads: 5,000 to 12,500 pieces per hour Portioning area for long dough pieces: 2, 3, 4, 5, or 6 portions Maximum length of long dough pieces: 800 mm * RT block length: 8.17 m * RT block width: 1.41 m * RT block height: 3.05 m Line in good condition when production ceased in May 2021 – currently disassembled and stored in containers Commissioned at the beginning of 2014 Delivery and commissioning available upon request

Condition: used, functionality: fully functional, Mobile screening plant on 2-axle trailer Feeder with tipping grid Double-deck screen box 3 discharge belts Hsdsxbriwjpfx Afienu with shredder Deutz diesel engine 5,115 hours

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 300 P-BP 30 -50 Intake port : 300 mm nominal motor power : 7,5 kW / 3 Ph Voltage: 400 V / 50 Hz Maximum volume flow : 6000 m³ / h Nominal volume flow : 5.089 m³ / h Negative pressure 2.587 Pa Filter area 30 m² Dimensions (L x W x H) in mm 3.000 x 1.361 x 2.817 Briquetting capacity 30 - 50 kg / h Hsdpfxoh D If Ho Afienu Briquette diameter: 50 mm Weight: 1570 kg Machine is brand new in our STOCK - IMMEDIATELY AVAILABLE - subject to prior sale Location: 54634 Bitburg

Condition: new, Empty weight: 120.000 kg Cargo space capacity: 160.000 l Productivity: 240 tph STANDARD CONDITIONS The plant is designed for a production of, 160 t/h of road mix with a finished product at initial moisture 4% and of 160 C, under the following standard conditions: •Aggregates temperature at dryer inlet 10 C •Altitude sea level •Average feed aggregates density 1.650 kg/m3 •Heavy-oil No: 6 calorific value ≥ 9.200 kCal/kg •Heavy-oil No: 4 calorific value ≥ 9.700 kCal/kg •Diesel-oil calorific value ≥ 10.200 kCal/kg •Natural gas calorific value ≥ 7.600 kCal/kg •Hot aggregates temperature increase 160 K •Mixture residual moisture content 0,3 % •Max. aggregates size 40 mm •Material passing screen 3 mm 35 % •Material not porous and hygroscopic with normal shape •Production tolerance rate according to ambient and parameterconditions ± 4 % COLD AGGREGATE BUNKERS •There shall be 4 cold aggregate bunkers made of 5 mm St 37 sheet, they shall be approximately20 m3 and each one shall be produced separately.•There shall be 800 mm high upper additions made of 6 mm sheet on the bunkers to preventmaterial overflow.•Material cast of the bunkers shall be made with group.•Material cast flow rate of each bunker shall be frequency controlled (speed controlled) dozingone by one if desired or adjustable from computer screen.•The flow rate of the material flowing from bunkers shall be adjustable from the manual gate to beplaced on each bunker.•In case of running out of the aggregate flowing from the bunkers, there shall be a warning systemand a warning sign shall be displayed on the computer screen to warn the operator.•Vibrator engine controlled from computer screen shall be placed to relieve material flow andprevent blockage in the bunkers with thin materials.•A conveyor belt system shall be installed under each bunker to ensure material flow.•Each bunker shall be equipped with modular gratings consisting of 10x50 metal sheets 10mmrounds.•Silo loading width shall be 3000x2400 mm.•There shall be rope emergency stop system for emergencies.•Possible failures on belts shall be displayed on the computer screen. 2.SUB-BUNKER COLD AGGREGATE COLLECTOR BELT •Horizontal belt shall convey the material taken from each bunker separately in a controlledmanner to the dryer sloped belt and be able to convey material to 160 t/h capacity plant.•Rubber belt shall be 10 mm thick; 800 mm wide 4 layered court fabric and have 4 EP 125qualities.•Belt Start/Stop operation shall be performed from computer screen. When the materials in thebunker are desired to be discharged at the end of the season, the belt may be run reversewithout running the other units.•Horizontal belt chassis shall be made of steel construction material by which the belt can operatesmooth and produced with belt tensioning system. •The belt shall be with separator system from each end. •The driving drum shall be rubber coated and it shall be 1 degree angle lathed. Hnjdow Hzk Depfx Afiju •There shall be rope emergency stop system for emergencies •Possible failures on belts shall be displayed on the computer screen. •The belt shall be 7,5 kw d/min red./motor driven, driving drum shall be rubber coated, the beltshall be able to be driven triple roller chassis. The bearings in the roller shall be enclosed type andmaintenance-free. 3.DRYER GROUP...

Year of construction: 2020, operating hours: 2,850 h, condition: used, CE mark: yes Serial number: TRX0169HDGLAxxxx Please contact ATS Norway for more information Please provide reference number upon request: 21106 Specifications : - 2020 model - Hours: 2850 - Capacity: 8m - Weight: 33,500 kg - CAT C4.4 engine - Gathering point small ring - Remote control with cable - Chassis (see pictures) Hnjdpfx Aew N Diaefiju - Good bands (see pictures) - Delivery by appointment Description : 2020 Terex Finlay 693 sight works. The work is used every other week so the number of hours can increase somewhat. It may come with wearing parts (cloths, rollers, bearings, rubber) for an additional price. Delivery by appointment   Hours: 2850 Own weight: 33500 Total Weight: 33500 CE: Yes Model: 693+

Condition: new, functionality: fully functional, power: 450 kW (611.83 HP), Year of construction: 2025, ### Crawler Mobile Crusher / Track-Mounted Mobile Stone Crusher: Introduction and Application Introduction: Crawler mobile crushers, also known as track-mounted mobile crushers, are versatile and highly efficient machines designed for crushing various materials on-site. Unlike traditional fixed crushers, these mobile units are mounted on tracks, allowing them to navigate rough terrains and remote locations with ease. These crushers integrate feeding, crushing, screening, and conveying processes into one system, providing flexibility and reducing the need for multiple pieces of equipment. Powered by diesel engines, they offer mobility, reduced setup time, and a compact design that simplifies transportation. Hnodpfxjq Nfvus Afieu Key Features: 1. Mobility: Track-mounted design ensures ease of movement across different sites. 2. Versatility: Suitable for crushing various types of materials, including rocks, ores, and demolition waste. 3. Efficiency: High-performance crushing and screening capabilities. 4. Eco-friendly: Equipped with dust suppression and noise reduction systems. 5. Automation: Advanced control systems for smooth operation and minimal manual intervention. Applications: 1. Quarrying and Mining: Ideal for crushing hard and abrasive stones such as granite, basalt, and limestone. They efficiently process raw materials for construction aggregates and mining operations. 2. Construction and Demolition: Perfect for on-site crushing of demolition waste, including concrete, bricks, and asphalt. This reduces the volume of waste and allows for recycling of materials, contributing to sustainable construction practices. 3. Infrastructure Projects: Widely used in road construction, railway ballast production, and infrastructure development. Their mobility ensures they can operate close to the construction site, reducing material transportation costs. 4. Recycling: Effective in recycling operations, particularly for crushing and processing concrete and asphalt debris. This contributes to reducing landfill use and conserving natural resources. 5. Aggregate Production: Essential for producing high-quality aggregates used in construction projects. Their capability to produce different sizes of aggregates meets various industry standards and requirements. Conclusion: Crawler mobile crushers are indispensable in modern construction and mining operations. Their mobility, efficiency, and versatility make them a valuable asset for industries requiring on-site crushing and screening. By reducing setup time and transportation costs, they enhance operational efficiency and contribute to eco-friendly practices through material recycling.

Year of construction: 2018, condition: used, with mesh safety enclosure, welded mesh fence, 1 sliding door for loading, 14 storage positions made of steel frame (blue), mobile loading trolley, IPSEN loading and unloading system, year of manufacture: 2018, serial number: 30.5185-60, 2 hinged doors, IPSEN hardening furnace DL(M)-5-E, year of manufacture: 2018, serial number: 30.5185-50, min./max. working temperature: 150/450°C, connection values: 49 kVA/38 kW/400 V/50 Hz, IPSEN autoclave "Electromagnetic Field Emission Category 2 (EN12198)", Ø approx. 180x400 cm, type: RUHT-524 (FV)AvaC(N), year of manufacture: 2018, serial number: 30.5185-10, min./max. working temperature: 150/1,320°C, 1 cooling unit KKT cBoxX, no.: 909120-00575, year of manufacture: 2018, water softening unit, pressure vessel MASCHINEN- UND BEHÄLTERBAU MB170512-3.14300L, volume: 14,300 l, year of manufacture: 2018 Hnedpfx Asxnahzjfieu

Year of construction: 2024, operating hours: 100 h, condition: used, Serial number: 5xxxx Please contact ATS Norway for more information Please provide reference number upon request: 19395 Specifications: - 2024 model - Hours: approx. 100 - Weight: 14,860 kg - Good lines - Comes with extra cloths - Undercarriage (see pictures) - Watch video - Ready for delivery Description: 2024 Portafill MR-5 sights with extra cloths. The cloths have a value of NOK 20,000. Only 75 hours. Ready for delivery. Hours: 100 Total Weight: 14860 Hnjdpfx Aovgx Iujfiju

Condition: new, functionality: fully functional, power: 11 kW (14.96 HP), Year of construction: 2025, A spiral-type sand washer machine, also known as a spiral sand washing machine or screw sand washer, is a piece of equipment designed for washing, classifying, and dewatering sand and other granular materials. This type of sand washer typically features a spiral or screw-shaped structure for the purpose of lifting, conveying, and washing materials. Here are key features and aspects of a spiral-type sand washer machine: 1. Spiral Structure: The core component of the machine is a spiral or screw-shaped structure, often enclosed within a tub or trough. This spiral impeller is responsible for lifting, conveying, and washing the sand as it rotates. 2. Tub or Trough Design: The spiral structure is usually housed within a tub or trough that holds the water and sand mixture. This design allows for efficient washing and separation of impurities from the sand. 3. Multiple Blades: The spiral impeller typically has multiple blades or flights that provide mechanical agitation to the sand, ensuring thorough cleaning. 4. Water Injection: Water is injected into the tub or trough to aid in the washing process. The combination of water and the rotating spiral helps to remove impurities from the sand. 5. Adjustable Weirs: Some spiral-type sand washers have adjustable weirs or gates that control the flow of water and the retention time of the sand in the machine, allowing for customization of the washing process. 6. Classification and Dewatering: Spiral sand washers often include features for classifying and dewatering the sand. This may involve the use of a separate compartment or mechanism for fine sand recovery and water drainage. 7. Variable Speed: The rotational speed of the spiral can often be adjusted to optimize the washing process for different types of materials and particle sizes. Hnedpfx Ajq Nf S Refieu 8. Capacity: The capacity of a spiral-type sand washer is influenced by factors such as the size of the machine, the pitch of the spiral, and the efficiency of the washing process. Different models are available to suit various production requirements. 9. Materials Handling: Spiral sand washers are commonly used in applications such as aggregate processing, mining, concrete production, and other industries where the removal of impurities from sand is essential. 10. Ease of Maintenance: Many spiral-type sand washers are designed for easy maintenance, with accessible components and inspection points. Spiral-type sand washer machines are efficient tools for cleaning and processing sand, ensuring that the final product meets quality standards for use in construction, concrete production, and other applications. The specific features and capabilities of these machines can vary between different models and manufacturers.

Year of construction: 2025, condition: used, comprising the following items: Placement unit (594), consisting of: 1 chain conveyor SEB-EURODRIVE, dimensions (W x H x D): approx. 350 x 145 x 60 cm; 1 rail conveyor device TEGEL-TECHNIK (595), carriage dimensions (W x H x D): approx. 130 x 160 x 130 cm, control system SIEMENS SIEMATIK HMI, rail length: approx. 25 m; 1 double hardening furnace PADELTTHERM KEU 1008/400-S (596), year of manufacture: 2023, connected load 4 and 3 phase 400V/50Hz, 60 kW, maximum temperature: approx. 400°C; 1 hardening furnace PADELTTHERM KEU 1008/400-S (597), year of manufacture: 2023, connected load 4 and 3 phase 400V/50Hz, 60 kW, maximum temperature: approx. 400°C; 1 autoclave ALD VACUUM Modultherm (598), year of manufacture: 2022, recorded operating hours: approx. 6,968, max. temperature: approx. 1,250°C, capacity: approx. 4,909 l / 338 l, 1 mobile autoclave unit on rail system, rail length approx. 25 m, ID: 39716; 1 pressure vessel, SABAWERK 47-001310, (599), capacity: approx. 5,000 l, max. allowable pressure: PS-1/40 bar, test pressure: approx. 58 bar, inspection date: 2023, maximum operating temperature approx. 50°C, min. operating temperature: approx. -10°C; 1 pressure vessel SABAWERK 47-001310, max. capacity: approx. 6,000 l, max. allowable pressure: PS-1/9 bar, test pressure: approx. 12.9 bar, inspection date: 2023, serial no.: 20550; 1 gas mixing unit FLUSYS (601), year of manufacture: 2022, comprising: 1 mixing battery FLUSYS type FSP-2030A_01, serial no.: M22111122A, year 2022, 1 compressed air drying unit ESD MK-HP575, year 2022, max. pressure: approx. 45 bar, max. capacity: approx. 575 m³/h; 1 compressed air compressor unit SAUER (602); 1 water treatment plant TECHNOTRANS (603); 1 pressure vessel KOMNINO KPT-10000-40/1.8 (604), year of manufacture: 2023, max. capacity: approx. 10,000 l, max. allowable pressure: approx. 57.2 bar, serial no.: 10054; 1 aluminium platform ladder, 10-steps, FARAONE 300/SN (605), max. load: approx. 150 kg, height: approx. 262 cm, net weight: approx. 35 kg, serial no.: 20230729002; 1 2-door steel cabinet (606), contents: various consumables for the multi-process hardening system. Hsdpfx Aoxnak Aofionu

Year of construction: 2013, condition: used, Please contact ATS Norway for more information Hodev U R Ivspfx Afisnu Please provide reference number upon request: 19926 2013 model Hour unknown

Condition: new, Year of construction: 2025, A stone production plant for sand and aggregate is designed to produce different types of materials used in construction, such as sand, gravel, and crushed stone. Here’s a detailed layout of a typical stone production plant: Process Overview Feeding: Raw materials (large stones) are fed into the plant. Primary Crushing: Large stones are reduced in size by a primary crusher. Secondary Crushing: Further reduction of stone size by secondary crushers. Screening: Separation of crushed materials into different sizes. Sand Making: Processing certain fractions to create sand. Washing: Cleaning of aggregates and sand to remove impurities. Stockpiling: Storing the final product for shipping. Main Components Raw Material Storage: Storage area for raw stones. Vibrating Feeder: Feeds stones into crushers consistently and evenly. Primary Crusher (Jaw Crusher): Breaks down large stones into smaller pieces. Secondary Crusher (Cone Crusher/Impact Crusher): Further reduces stone size. Vibrating Screen: Classifies materials into different size fractions. Sand Making Machine (Vertical Shaft Impact Crusher): Converts some fractions into sand. Sand Washer: Cleans sand to remove unwanted particles. Belt Conveyors: Transports materials between different processing stages. Control System: Monitors and controls the entire production process. Dust Collection System: Reduces dust emissions for environmental compliance. Applications of Stone Production Plant Construction Industry: Essential for concrete, road construction, and building foundations. Landscaping: Used for decorative aggregates, pathways, and erosion control. Infrastructure Development: Supports drainage systems and flood control structures. Manufacturing: Provides materials for glass, cement, and steel production. Agriculture: Neutralizes acidic soils and serves as livestock feed. Environmental: Used in water treatment and land reclamation projects. Residential Applications: Ideal for driveways, walkways, and patios. Recreational Facilities: Supplies sand for golf courses and playgrounds. Energy Sector: Supports oil and gas drilling and renewable energy projects. Art and Design: Utilized in sculptures and architectural features. Hnjdpfoq Ny Sasx Afiou

Year of construction: 2012, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 19931 2012 model Hnjdpov U Sy Tsfx Afiou Hour unknown Stationary

Condition: new, Year of construction: 2025, For crushing marble, sandstone, and quartzite, various types of crushers can be used depending on the properties of the raw materials and the desired final product specifications. Here are some common types of crushers that may be suitable for processing these materials: 1. Jaw Crusher: Hodpfx Ajq Nx Nnsfienu - Jaw crushers are commonly used for primary crushing. They are robust machines that handle tough materials, making them suitable for breaking down hard and abrasive stones like marble and quartzite. 2. Impact Crusher: - Impact crushers are versatile and suitable for both primary and secondary crushing. They work by impacting the material with hammers or blow bars, producing a high reduction ratio. Impact crushers can be effective for shaping the final product. 3. Cone Crusher: - Cone crushers are often used for secondary or tertiary crushing. They are suitable for processing harder stones and can produce well-shaped and fine-grained aggregates. 4. Gyratory Crusher: - Gyratory crushers are used for large-scale primary crushing. They have a conical-shaped head and are well-suited for handling abrasive materials. However, they are less commonly used than jaw or cone crushers. 5. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are suitable for shaping and producing artificial sand. They operate by throwing the material against a set of anvils or impellers to break it down into finer particles. 6. Hammer Crusher: - Hammer crushers are used for crushing softer materials like sandstone. They operate by applying force to the material, causing it to break along natural fault lines. 7. Roll Crusher: - Roll crushers are used for reducing the size of friable materials. They consist of two counter-rotating rolls that compress the material between them. 8. Crawler Mobile Crusher: - Mobile crushers offer flexibility and mobility, allowing them to be used directly at the quarry or job site. Crawler mobile crushers can handle various types of stones, including marble, sandstone, and quartzite. 9. Screening Equipment: - After the initial crushing stage, screening equipment such as vibrating screens may be used to separate different sizes of crushed material. 10. Dust Suppression Systems: - Crushing operations can generate dust, and dust suppression systems are used to minimize environmental and health impacts. When selecting a crusher for marble, sandstone, or quartzite, consider factors such as the hardness of the material, the desired final product specifications, and the production capacity required. Additionally, it's important to integrate the crushing process into an overall plant design that may include screening, conveying, and washing equipment depending on the specific needs of the application.

Year of construction: 2009, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 19930 2009 model Hodpfev U Sa Tsx Afisnu King pin, 2 axle chassis Hour unknown

Condition: new, Year of construction: 2025, power: 300 kW (407.89 HP), A ball mill is a key equipment in the grinding process of barite. It is designed to grind and blend solid or hard materials into smaller pieces, particularly powder. In a barite grinding plant, ball mill is often used for grinding barite into an ultrafine powder for various applications. Here are key features and aspects of a ball mill used for barite grinding in a plant: 1. Mill Structure: - The ball mill for barite grinding typically consists of a horizontal cylindrical shell with ends that are flanged and bolted on. The ends may contain openings for feeding and discharging the barite. 2. Grinding Media: - Steel or ceramic balls are commonly used as grinding media in the ball mill. The grinding media helps in the grinding process by reducing the size of the barite particles. 3. Rotation: - The mill rotates on its horizontal axis. The rotational motion of the mill, driven by a motor, causes the grinding media to cascade and grind the barite. 4. Feed and Discharge: - Barite is typically fed into the ball mill through a hopper or a conveyor. The ground barite particles are discharged from the mill through a discharge end. 5. Control System: - Modern ball mills are equipped with control systems to monitor and regulate critical parameters, such as mill speed, feed rate, and temperature. This allows for precise control of the grinding process. 6. Size Reduction: - The primary purpose of the ball mill is to reduce the size of barite particles. Grinding occurs as the barite is subjected to the impact and friction forces of the grinding media. 7. Classification: - Depending on the desired fineness, a classification system may be integrated into the ball mill to separate fine particles from coarse ones. This ensures that the final product meets the required specifications. 8. Dust Collection: - A dust collection system may be incorporated to capture and collect fine particles generated during the grinding process, ensuring a clean and safe working environment. 9. Liners: Hnjdpfx Aoq Ngafjfiju - The interior of the ball mill is often lined with wear-resistant materials, such as steel or rubber, to protect the mill shell from abrasion and ensure longer equipment life. 10. Application in Barite Processing: - The ball mill in a barite grinding plant is a crucial piece of equipment for processing barite ore into a fine powder. This powder is used in various industries, including oil and gas drilling, coatings, and pharmaceuticals. 11. Safety Features: - Safety features, such as monitoring devices and emergency shutdown systems, are typically incorporated into ball mills to ensure safe operation. The specific design and features of a ball mill for barite grinding can vary among different manufacturers and applications. It is essential to follow proper procedures and guidelines for the operation and maintenance of the equipment to ensure optimal performance and longevity.

Year of construction: 2016, condition: used, Please contact ATS Norway for more information Hedpfxsv U Sgmj Afionu Please provide reference number upon request: 19932 2016 model Hour unknown Stationary

Condition: new, Year of construction: 2025, We have various kinds of ball grinding mill such as batch ball mill, rod mill, cement ball mill, mining ball mill, welcome to contact our team for further details according to your specific requirements. Hjdjq I Nw Ijpfx Afisnu

Year of construction: 1991, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 19963 Hodpjv U R Nmjfx Afienu 1991 modell Timer ukjent

Condition: new, Year of construction: 2025, An active lime production line is a set of equipment designed to produce high-quality lime from limestone, with the aim of meeting various industrial applications, such as in the production of steel, environmental desulfurization, and other processes. The process typically involves several stages, including limestone crushing, calcination, hydration, and finally, the production of active lime. Here is a general overview of the main steps involved in an active lime production line: 1. Limestone Quarrying: - Raw limestone is extracted from quarries and transported to the lime plant. The limestone may undergo crushing and sizing processes to achieve the desired particle size. 2. Limestone Preheating: - The raw limestone is typically preheated in a preheater or precalciner before entering the rotary kiln. This preheating step helps to reduce the energy consumption in the kiln by partially decarbonizing the limestone. 3. Loading into the Rotary Kiln: - The preheated limestone is loaded into the rotary kiln, a large, rotating cylindrical furnace. The kiln is inclined at a slight angle to facilitate the movement of materials through the kiln. 4. Calcination: - In the rotary kiln, the limestone undergoes high-temperature calcination (typically in the range of 900 to 1,450 degrees Celsius). This process causes the limestone to undergo chemical and physical changes, converting it into lime (calcium oxide). 5. Cooling: - After calcination, the lime moves through the cooling zone of the kiln, where it is cooled down. This cooling step is essential to stabilize the lime and prepare it for further processing. Hodpfxeq Nyzbs Afisnu 6. Hydration: - The quicklime produced in the kiln is then slaked with water in a hydration process to produce slaked lime (calcium hydroxide). This is typically done in a separate hydrator. 7. Separation of Unreacted Lime: - The slaked lime is separated from any unreacted quicklime or impurities. This step ensures that the final product is of high quality. 8. Filtering and Drying: - The separated slaked lime is filtered to remove excess water, and the resulting product is dried to achieve the desired moisture content. 9. Storage and Packaging: - The final product, active lime (calcium oxide), is stored in silos or other storage facilities. It can then be packaged for sale or transported to end-users. 10. Environmental Considerations: - Dust collection systems and other environmental control measures are often implemented to minimize emissions and ensure compliance with environmental regulations. The design and configuration of an active lime production line can vary based on factors such as the type of limestone used, production capacity requirements, and specific industrial applications. Modern production lines often incorporate advanced technologies to optimize energy efficiency, minimize environmental impact, and ensure high-quality active lime production.

Year of construction: 1971, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 20724 Hjdpfjwrl Ukjx Afisnu Specifications: 1971 model Delivers 4 fractions Complete, but without engine Original spare tire Ready for delivery

Operating hours: 3,352 h, condition: used, CE mark: yes Serial number: 233xxxx Hnedpfx Aewphuzefieu Please contact ATS Norway for more information Please provide reference number upon request: 20518 Specifications: - 3352 Hours - Feed box - Hanging screen - Conveyor - Raise and lower function (hydraulic) - Underroller - starts and runs - Ready to deliver Description: We have a Powerscreen MK2 screen for sale. Everything works as it should according to the owner. Services have been taken by the owner continuously. Ready to deliver Hours: 3352 Own weight: CE: Yes Model: MK2

Year of construction: 1974, condition: used, Serial number: 13511xxxx Please contact ATS Norway for more information Hnedpfxow R Npnj Afiju Please provide reference number upon request: 21156 We have a 1974 Svedala Arbr sorting plant for sale. The work is working, but it is old. Some wear and tear can be expected. Buy in the condition it is in. Ready for delivery.

Operating hours: 4,673 h, condition: used, Serial number: 27xxxx Please contact ATS Norway for more information Please provide reference number upon request: 16563 Hnsdpfow Sc Utsx Afiju Specifications: - Screening covers - Feeding box - Hours: 4673 - Coversare included - Line feeding - Ready for delivery Description. This quarry sieve has been used for sifting soil. Everything works as it should, says the owner. Comes with covers in different sizes. Line feeding. Ready for delivery Hours: 4673 Own weight: 8900 Model: MK 2