Used Diode for sale (103)

Condition: good (used), Trumpf Vectormark Type: VMc2 Trumpf Vectormark laser marker with Fuchs extraction and filter devices Hjdpfx Ajciz Iysdajh Trumpf Vectormark GREEN 532nm Trumpf VMc2 Laser marker, with frequency-doubled diode-pumped Nd:Yag laser with Hurryscan 10 - Galvo head from Scanlab Fuchs extraction and filter devices TKFD The integrated pre-separator ensures the high filter capacity Different filter levels are possible and can be perfectly customized Ideal for confined spaces - can be placed under a table or integrated into machines Welding fume separation class W3, IFA certified TKFD can also be transported in the trunk without modification Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Illumina DNA Sequencer MiSeq SY-410-1003 Description: RFID tracking for consumables MiSeq Control Software 2.6 Hodpoxqnvrjfx Adash LTSC Operating environment Temperature: 22°C ± 3°C Humidity: Non-condensing 20%–80% Altitude: Less than 2,000 m (6,500 ft) Air quality: Pollution degree II Ventilation: Maximum 1,364 BTU/h For indoor use only Light Emitting Diode (LED): 520 nm, 660 nm Dimensions W × D × H: 68.6 cm × 56.5 cm × 52.3 cm (27.0 in × 22.2 in × 20.6 in) Weight: 57.2 kg (126 lb) Power supply 90–264 VAC at 50/60 Hz, 10 A, 400 W Radio Frequency Identification (RFID) Frequency: 13.56 MHz Power: 100 mW Product safety and compliance NRTL certified IEC 61010-1 CE marked FCC/IC approved Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) Weight: approx. 35 kg (Specifications subject to change and errors excepted!) Further questions can be answered by phone.

Condition: good (used), Here we offer a laser beam source from Coherent with PC. Name: AVIA 355-X Operating hours: Diodes 1975/1975, Head 26488 Wavelength: 355nm Excitation: diode pumped Laser type: Nd:YAG laser Hodpfx Aodmzhqodaoh Laser type 2: THG, Q-switch Operating mode: pulsed Laser power: 10 W at 60 kHz Beam divergence:

Condition: excellent (used), Here we offer a laser beam source from Coherent. Designation: AVIA 355-X Hodpfx Adsihp Aroaeh Operating hours: Diodes 43022/43022, Head 42955 Crystal Shifter: 1845.91 hours Wavelength: 355nm Excitation: diode pumped Laser type: Nd:YAG laser Laser type 2: THG, Q-Switch Operating mode: pulsed Laser power: 10 W at 60 kHz Beam divergence :

Condition: excellent (used), Year of construction: 2008, A used TruLaser 3530 laser cutting system is for sale. Technical data: - Operating hours: beam on 2955 h/laser on 15464 h - X-travel 3000 mm (max. 3104) - Y-travel 1500 mm (max. 1580) - Xp-travel 300 mm (max. 305 mm) - Z-travel 114 mm - max. material thickness 20 mm - maintenance-free three-phase motors in X1, X2, Xp, Y1, Y2 and Z axes - max. positioning speed parallel to the axis 120 m/min - simultaneous 170 mm/min. - Acceleration when positioning X-axis 9 m/second - Xp + Y-axis 15 m/second - Cutting X-axis 4 m/second - Cutting Xp and Y-axis 15 m/sec. Standard equipment - Closed machine frame with integrated laser resonator - Movement unit for optimal processing speeds Hsdpfx Adsixl Tneaeh - Additional highly dynamic XP axis - Automatic pallet changer - Closed beam guidance - NitroLine, high-pressure cutting - FocusLine, constant focus position - Compressed air cutting - PierceLine, reduction of the piercing process - PlasmaLine, plasma sensors - SprintLine, fast processing - LensLine - FlyLine - ContourLine, for producing small holes - Microweld - Spray device - Position laser diode - Programmable cutting gas pressure - Automatic switch-off - Work area lighting - TruTops Laser lite - CO2 laser TruFlow 3200 with high-frequency excitation, mirror telescope and maintenance-free turbo radial blower - Laser control TASC 3, logbook function and cooling unit - Laser cutting head with 5 and 7.5 lens and quick-change device - ControlLine, capacitive height control and process control - Sinumerik 840D control: Open control - Causes of error messages via diagnostic functions Extended machine equipment - Pallet changing system - Laser cutting heads 5" and 7.5" - Additional laser cutting head with 3.75" lens for high-speed cutting - Dimensions in mm: approx. 9300 x 4600 x 2000, weight in kg: approx. 11500 Year of manufacture: 2008 Special price €55,000 net Machine has been dismantled. Can be viewed by prior arrangement. If you are interested, please contact us

Condition: used, functionality: fully functional, Agilent G1956A LC/MSD VL + PC & software mass spectrometer. The Agilent G1956 LC/MSD Mass Spectroscopy Instrument is a highly reliable, laboratory-grade mass selective detector. The Agilent 1100 Series includes variable,multiwavelength, diode-array and mass selective detectors in addition refractive index and fluorescence detectors. The fluorescence detector, which has an innovative optical design, provides: • Simultaneous quantitative and qualitative information from up to four signals in a single run, saving time • Real-time spectra (similar to diodearray detection) for fast method optimization and peak identification. The mass selective detectors offer: • complete mass spectral information from the single-quadrupole LC/MSD and complete MS/MS data from the ion trap LC/MSD Trap • excellent sensitivity, reproducibility and ruggedness thanks to a patented orthogonal-spray ion source and highcapacity drying gas system. Hjdpfx Ajt Uk I Esdajh Good working condition. Please check out our other listings as well.

Year of construction: 2022, condition: used, functionality: fully functional, Thermo Scientific Luminex xMAP INTELLIFLEX System. Year of manufacture: 2022 The Luminex xMAP INTELLIFLEX System is the newest addition to the xMAP line of instruments.The Luminex xMAP INTELLIFLEX System represents the most advanced and versatile multiplexing platform, featuring an embedded PC with a touchscreen interface and a reduced footprint compared to the Luminex 200 and FLEXMAP 3D systems. With automated start up, shut down, and maintenance routines, the Luminex xMAP INTELLIFLEX System is easy to use and maintain, providing fast read times for both 96- and 384-well plate formats. The system is compatible with all Invitrogen ProcartaPlex multiplex immunoassays and Invitrogen QuantiGene Plex multiplex gene expression assays. Hodpfxet Iikls Adaoh Features of the Luminex xMAP INTELLIFLEX System include: • Reporter laser (RP1): 532-nm diode-pumped solid-state laser (DPSS); mode of operation, continuous wave (CW); output power varies based on mode with maximum output power of 50 mW • Reporter detector (RP1): photomultiplier tube, detection bandwidth of 565 to 585 nm • Dynamic range (typical): RP1: ≥5.5 logs • Read time: 96-well plate in ∼20 min (up to 144,000 tests/hour); 384-well plate in ∼75 min (up to 153,600 tests/hour) • System warmup time: 30 min • System intialization: ≤45 min • System verification: 5 min • Multiplexing: up to 500 analytes in a single sample (assay-dependent) • Available options: service contracts, IQ/OQ • Integrated PC and integrated barcode reader Good working condition. Please check out our other listings as well.

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: PJ000400, Type: PJ.003.0000 Print plate size (mm): 240 x 240 up to 670 x 525 Plate thickness (mm): 0.15 to 0.30 Equipment / Additional information: G & J stacker Software, RIP, Computer The machine has 1 laser head with 64 diodes Hedpfxjpahr Ae Adash Dismantling, packaging of the machine and securing (insurance of the machine during transport) were carried out by the manufacturer / Heidelberg.

Condition: excellent (used), Year of construction: 2002, machine/vehicle number: 023910293, Speed: 20 plates /h Counter: 69'068 plates Format (cm): 50x70 Equipment / Additional information: With Server, Trueflow Software with integrated plate punch with 40 laser diodes (individually replaceable) -Dismantling, packaging of the machine and securing (insurance of the machine during transport) were carried out by the manufacturer / Heidelberg. Hsdpfsrigkhox Adash

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 41,657 h, controller model: SINUMERIK 840 D SL, laser power: 5,000 W, working length: 3,000 mm, working width: 1,500 mm, TECHNICAL DETAILS Working area: 3,000 x 1,500 mm Travel range X-axis: 3,000 mm Travel range Y-axis: 1,500 mm Travel range Z-axis: 116 mm Laser power: 5,000 W MACHINE DETAILS Control: SINUMERIK 840 D SL Operating hours Total operating hours: 67,508 h Laser on hours: 41,657 h Current laser output (as of 27.04.2023): 5,335 W EQUIPMENT Torque drive in combination with linear direct drives Enclosed beam guidance via laser light cable (LLK) Machine cooling unit (water-air) Integrated control cabinets with internal lighting Automatic pallet changer (longitudinal direction) 17" touch colour display Wide longitudinal conveyor belt TruDisk power supply via the machine Workspace illumination Positioning laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Copper cutting package (includes cutting data) Brass cutting package (includes cutting data) Solid-state laser TruDisk 3001 with 1 LLK output LLK according to standard layout Laser cooling unit (water-air) Excitation via pump diodes Laser power control Universal cutting unit with fully adaptive lens system Cutting head strategy Protective glass against lens contamination Condition monitoring of protective glass ControlLine: height control and sheet outer edge detection Simple shop programming Extended shop programming Fast re-production Integrated technology data Automatic shut-off Programmable cutting gas / pressure selection FastLine Hedox A Hagepfx Adaeh FlyLine AdjustLine Teleservice via internet USB interface RJ-45 network connection CE marking Light barriers Multi-chamber extraction system Compact dust extraction system Machine enclosure, certified viewing window, right-hand door Electric roller roof

Year of construction: 2019, condition: like new (used), Laser Welding Robotic system for welding steel, stainless steel. Scope of supply: 1 x YASKAWA 6-axis robot YASKAWA HP20D.(Payload: 20kg, H-Reach: 1717mm, Robot Mass: 280kg, 2009.01) 1 x YASKAWA DX100 controller.( 2009.02 ) 1 x LASERLINE LDM 1200-60 Diode 1320W Laser.(2015.10) 1 x LASERLINE laser welding head OTS-5 with Crossjet and cam.(2017.12) 1 x Cooling water circulation 2 way system HYFRA Sigma7 for laser and optics.(2018) 1 x siegmund table 1200x800.(2019) Hodpoh Aiy Sefx Adaoh Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Condition: excellent (used), Year of construction: 2022, operating hours: 95 h, functionality: fully functional, For sale: Complete industrial microwave generator system from MUEGGE GmbH (Germany), 30 kW at 915 MHz, in excellent condition with very low operating hours. This package includes the full WR975 high-power waveguide assembly, making it ideal for industrial heating, drying, food processing, chemical applications, and R&D environments. Technical Specifications Microwave Power Supply: • Output power: 30 kW • Frequency: 915 MHz • Input: 3 × 400 VAC, 50 Hz Hsdpfx Adjx Ex Drjash • Control interface: CAN • Colour: RAL7035 • Included: 10 m CAN cable Magnetron Head: • Power rating: 30 kW / 915 MHz • Waveguide interface: WR975 Included Waveguide Components: • 100 kW circulator, WR975 • WR975 waterload • Detector diode (for forward/reflected power monitoring) • 20 dB attenuator, Type R 412 720 Documentation: • Complete English instruction manual and technical documentation provided on USB stick. Condition: • Excellent – barely used • Fully functional and tested • Located in France • Ready for immediate dispatch Applications: • Industrial microwave heating • Drying and dehydration processes • Pasteurisation and food treatment • Chemical and materials processing • Research and development Original New Price: • €109,000 (manufacturer reference) Asking Price: • Negotiable, subject to shipping and inspection

Condition: used, functionality: fully functional, Year of construction: 2015, Machine - Enclosed machine frame - Automatic pallet changer in longitudinal direction - Torque drive in combination with linear direct drives - Enclosed beam guidance using fiber optic cable (LLK) - Machine cooling unit (water-air) - Integrated control cabinets with interior lighting - Power supply to TruDisk via the machine - Longitudinal conveyor belt - Work area lighting - Positioning laser diode - Oil spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning - Transport and assembly device TRUMPF Laser - Solid-state laser TruDisk with 1 fiber optic output - Laser cooling unit (water-air) - Excitation via pump diodes - Laser power control Cutting Unit - Universal cutting unit with fully adaptive lens system - Single cutting head strategy - Protective glass against lens contamination - Protective glass condition monitoring - ControlLine: height control and sheet metal edge detection Hsdpfx Aoxw Uryedash Control - Advanced workshop programming (TruTops via network access) - Fast repeat production - 17" touch color screen - Integrated technology data - Automatic shut-off - Programmable selection of cutting gas/pressure - ContourLine - Microweld - FastLine - FlyLine - AdjustLine - Teleservice via Internet - Integrated e-shop Data Transfer - USB interface - RJ-45 network socket Safety - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extractor - Machine enclosure with certified viewing window (right door) - Roll-up roof Special Equipment: • 3001 on TruDisk 4001 • Extended pallet extraction • Dust protection device panel • Viewing window left • Side viewing windows right • Storage interface • Brightline Fiber • Titanium cutting package • Brass cutting package • Copper cutting package • Nozzle changer

Condition: good (used), Year of construction: 2005, operating hours: 63,102 h, machine/vehicle number: A0230A1162, control type: CNC control, controller manufacturer: Siemens, controller model: Sinumerik 840D, laser type: CO₂ laser, laser source manufacturer: Trumpf, laser hours: 28,387 h, laser power: 6,000 W, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 15 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 115 mm, TRUMPF Trumatic L3050 Laser Cutting Machine Year of manufacture: 2005 Control system: Sinumerik 840D Laser type: TLF 6000 Laser power: 6000 W Working area X: 3000 mm Working area Y: 1500 mm Working area Z: 115 mm Max. speed X: 60 m/min Max. speed Y: 60 m/min Laser on hours: 63,102 h, Beam on hours: 28,387 h Max. sheet thickness (mild steel): 25 mm Max. sheet thickness (stainless steel): 20 mm Max. sheet thickness (aluminum): 15 mm Equipment: HI-LAS high-pressure cutting Cutting head with 5" lens Cutting head with 7.5" lens Quick-change cutting heads Sheet position detection system Laser positioning diode Programmable selection of cutting gases with stepless pressure adjustment Micro welds PMS plasma monitoring system Sprint-Las Head distance regulation (DIAS III) ContourLas AutoLas Plus Oil spray system Hydraulic pallet changer Work area lighting Longitudinal conveyor Hodpfx Aox Ap A Redash Sectional extraction system Filtration system Automatic shut-off Light barriers Tele-service RJ 45 3.5'' floppy disk drive User manual Used machine in good condition, inspected by qualified personnel. Machine available in March 2026.

Condition: used, functionality: fully functional, mileage: 348,568 km, power: 338 kW (459.55 HP), first registration: 05/2023, fuel type: diesel, overall weight: 8,523 kg, axle configuration: 4x2, wheelbase: 375 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 13,000 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Adaptive Cruise Control. Cabin: CR (air comfort suspension). Tilting: mechanical. Batteries 210 Ah (rear position). Alternator charge 150 A. Engine DC13 175 460 hp EURO 6. Gearbox: G33CM. Advanced Emergency Braking AEB, Auxiliary brakes, Retarder type R4100D, Exhaust brake control Side Collision Avoidance Support Hsdpfx Adexwilbeash Driver attention support Driver comfort Air-conditioning system, automatic Seat with armrest adjustable shock absorber driver side Seat with armrest adjustable shock absorber passenger side Bed upper lower and upper width 800mm. Night heater WTA cab heater 3kW. Storage rear lower, driver side - refrigerator. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Front tyres 315/70R22.5. Rear tyres 315/70R22.5. Fifth wheel Jost JSK37C-Z, height 150 mm *STGO with axle/GVW design weights only. Fuel volume left side 825 dm3. Fuel volume right side 395 dm3. AdBlue tank capacity 150 l, right Fuel tank material aluminium. Speed limitation legal 90 km/h. Technology Infotainment system 2 DIN with 5 inch screen (Advanced) FMS, Fleet Management System preparation Gateway Exterior Headlamps LED (automatic). Daytime running light function LED and position lamps. Fog lamp front type LED 3 diodes Roof air deflector adjustable Door window air deflector

Condition: used, functionality: fully functional, mileage: 323,139 km, power: 338 kW (459.55 HP), first registration: 04/2023, fuel type: diesel, overall weight: 8,523 kg, axle configuration: 4x2, wheelbase: 375 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 13,000 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Adaptive Cruise Control. Cabin: CR (air comfort suspension). Tilting: mechanical. Batteries 210 Ah (rear position). Alternator charge 150 A. Engine DC13 175 460 hp EURO 6. Gearbox: G33CM. Advanced Emergency Braking AEB, Auxiliary brakes, Retarder type R4100D, Exhaust brake control Side Collision Avoidance Support Driver attention support Driver comfort Air-conditioning system, automatic Seat with armrest adjustable shock absorber driver side Seat with armrest adjustable shock absorber passenger side Bed upper lower and upper width 800mm. Hedpfxexwik De Adash Night heater WTA cab heater 3kW. Storage rear lower, driver side - refrigerator. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Front tyres 315/70R22.5. Rear tyres 315/70R22.5. Fifth wheel Jost JSK37C-Z, height 150 mm *STGO with axle/GVW design weights only. Fuel volume left side 825 dm3. Fuel volume right side 395 dm3. AdBlue tank capacity 150 l, right Fuel tank material aluminium. Speed limitation legal 90 km/h. Technology Infotainment system 2 DIN with 5 inch screen (Advanced) FMS, Fleet Management System preparation Gateway Exterior Headlamps LED (automatic). Daytime running light function LED and position lamps. Fog lamp front type LED 3 diodes Roof air deflector adjustable Door window air deflector

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, machine/vehicle number: A1221E0223, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Siemens, controller model: Sinumetrik 840 D SL, Equipment: CE marking, safety light barrier, Type: TruLaser 3030 fiber (L81), Year of manufacture: 2020, Working area: 3000 x 1500 mm, Laser power: 4000 watts, Control: Siemens Sinumerik 840 D SL, Max. sheet thickness/steel: 20 mm, Max. sheet thickness/stainless steel: 20 mm, Max. sheet thickness/aluminum: 20 mm, Max. speed: 170 m/min, Accuracy: 0.1 mm Dimensions: Length 9,229 mm, Width 6,145 mm, Height 2,200 mm, Weight: 11,700 kg Machine number: A1221E0223 Equipment: • Longitudinal conveyor belt • Integrated control cabinets • Integrated storage compartment • Work area lighting • Positioning laser diode • Spray device • Permissible ambient temperature: 5–40°C • Machine status indicator • Dust protection for electronics panel TRUMPF Laser: • HighSpeed Cutting Package and Performance Package • Fusion cutting • Pump diodes drive • Laser power control Cutting Unit: • Single-cutting-head strategy • Universal cutting unit with adaptive lens system • Protective glass • Online protective gas condition monitoring • Automatic nozzle centering Control System: • SINUMERIK 840D SL control • Fast re-production • Integrated technology database • Copper cutting package • Brass cutting package • Automatic shutdown • Programmable selection of cutting gas/pressure • Microweld • Production planning • Remote support interface • Multi-sheet processing • Condition Guide • Cutting Guide • Advanced machine sensors for Condition Guide • Ergonomic control panel with 21.5" widescreen multi-touch display Functions: • AdjustLine • ControlLine • FastLine • FlyLine • NitroLine • PierceLine • FocusLine Data Transmission: • USB interface • RJ45 network port • Central Link • Online Update Manager Safety: • CE marking • Light grids • Multi-chamber extraction system • Machine enclosure with certified viewing window (right door) Additional Equipment: • Support rails made of structural steel • Compact dust extractor • TruDisk power supply via machine Hedoxz Dwaspfx Adaoh • Sliding roof • Automatic longitudinal pallet changer • External TruDisk 4001 solid-state laser with 1 fiber output included • 1 fiber output • BrightLine fiber • Performance Package fusion cut • HighSpeed cutting package • HighSpeed ECO cutting package • Drop & Cut • Integrated camera 1 for process monitoring • View of front work area (approx. 2.5 m) • Exhaust connection fitting for compact dust extractor • Wireless Operation Package + Including Storemaster

Condition: used, functionality: fully functional, Year of construction: 2013, machine/vehicle number: 30131003, Laserline LDF 400–4000 – Diode Laser Description: Industrial high-power diode laser from Laserline GmbH, Mülheim-Kärlich (Germany). This laser is ideally suited for applications in welding, hardening, coating, and other material processing operations. Robust design, precise control, and reliable continuous output. Technical Data: Hjdpfx Ajxuiyyodajh Manufacturer: Laserline GmbH, Germany Model: LDF 400–4000 Year of manufacture: 05 / 2013 Laser power: 4,400 W (cw) Wavelength (laser): 940 – 1,060 nm ± 10 nm Wavelength (pilot laser): 650 nm Max. power consumption: 11.8 kW Power supply: 380 – 480 V ± 10 %, 3 phases Mains frequency: 50 / 60 Hz Serial number: 30131003 CE marking: Present Condition: Used, fully functional

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 9,000 h, laser hours: 9,000 h, TRULASER LASER 3030 L95 4kW + LOADMASTER Year of Manufacture: 06/2022 Machine Hours: 14,000 h Laser Beam Hours: 9,800 h Basic Machine: - TruLaser 3030 fiber (L95) - Working area: 3000 x 1500 mm - Box frame construction - Longitudinal conveyor belt - High-precision motion unit - Gantry drive combined with linear direct drives - Process cooler for machine and laser (water/air) - Illuminated work area - Pilot laser - Spraying equipment - Automatic nozzle cleaning - Integrated electrical cabinets - Integrated auxiliary cabinet - Enclosed beam guidance via laser light cable (LLK) - Machine status indicator light - Transport and installation equipment TRUMPF Laser: - Excitation via pump diodes - Laser power regulation Cutting Unit: - Single cutting head concept - Universal cutting unit with adaptive lens system - Protective window - Online protective window condition monitoring - Automatic nozzle centering Control: - Quick post-production features - SINUMERIK 840D SL CNC controller - Ergonomic control panel with 21.5" widescreen multi-touch color display - Integrated technology database - Auto-shutdown feature - Programmable cutting gas/pressure selection - Micro-welding function - Remote support interface - Production scheduling - Multi-sheet processing - Condition Guide - Cutting Guide Functions: - AdjustLine - ControlLine - FastLine - FlyLine - FocusLine - NitroLine - PierceLine Hjdpfx Adoxw Uy Dsash - PlasmaLine - Copper Cutting Package - Brass Cutting Package Data Transfer: - USB interface - RJ45 network port - Central Link - Online Update Manager Safety: - CE marking and EC Machinery Directive compliance - Light barriers - Multi-chamber compact dust extractor - Fully enclosed safety housing with certified viewing panel (right) Advanced Standard Configuration: - Compact dust extractor - Sliding roof - Mild steel support slats - TruDisk power supply via machine - Longitudinal automatic pallet changer - Suitable for ambient temperatures 5 to 40°C / max. 45°C - External solid-state TruDisk 4001 laser with single output ADVANCED EQUIPMENT: - External solid-state TruDisk 4001 laser with single output, includes BrightLine fiber - Camera 1 - Drop & Cut feature - Highspeed Eco cutting package (high-speed cutting with low gas consumption) - Thick sheet metal cutting package - Wireless Operation Point - MDE Interface AUTOMATION: - LoadMaster 1530 loading system Technical Data: Control, Hardware, Electricals: - Control: Siemens 840D SL - Operating system: Windows 10 IoT - Display: Multi-touch screen - Screen size: 21.5" - Interface: USB Axis Data – Maximum Axis Speed: - Simultaneous: 170 m/min Working Range, Workpiece Size – Nominal Range: - X axis: 3000 mm - Y axis: 1500 mm - Z axis: 116 mm Laser-Specific Data (TruDisk 4001): - Maximum laser power: 4000 W - Max. sheet thickness (mild steel): 25 mm - Max. sheet thickness (stainless steel): 20 mm - Max. sheet thickness (aluminum): 20 mm LoadMaster 1530: Loading Specifications: - Max. sheet size: 3000 mm x 1500 mm - Max. sheet thickness: 25 mm - Max. sheet weight: 900 kg

Year of construction: 2007, condition: good (used), machine/vehicle number: 10369, Thermal CTP PT-R4300 E: Computer to Plate Recording System: External Drum 2 x SA-L4100 Single Autoloader: Fully Automatic loading of 50 Plates & automatic interleaf removal PST 26 Plate Stacker Bacher Punch 425 for PT-R4000 ADARA TH 85: Cleaning and Gumming unit for chemistry-free thermal CTP Plates Technical Details: Throughput option (plates/h in max. format) : 10 Plates / Hour Light Source: 16-channel infrared laser diodes Min. Plate Format : 324 x 370 mm Maks. Plate Format : 830 x 660 mm Hsdpfxsfh Dm No Adajh Maks. Imaging Format : 830 x 633 mm Plate Thickness : 0,15 - 0,3 mm Resolution : 2,400 - 2,438 - 2,540 dpi Machine Dimensions L x W x H : 1,750 x 1,030 x 1,178 mm Technical data can vary according to job, consumables and possible other factors

Year of construction: 2005, condition: good (used), machine/vehicle number: 756, Thermal CTP PT-R4300 (Computer to Plate) Recording System: External Drum PST 26 Plate Stacker Glunz & Jensen Interplater MP 85: Thermal Plate Processor Technical Details: Throughput option (plates/h in max. format) : 20 Plates / Hour Light Source: 32-channel infrared laser diodes Min. Plate Format : 324 x 370 mm Maks. Plate Format : 830 x 660 mm Hjdpfx Adjfh Dmzeajh Maks. Imaging Format : 830 x 633 mm Plate Thickness : 0,15 - 0,3 mm Machine Dimensions L x W x H : 1,750 x 1,030 x 1,178 mm Technical data can vary according to job, consumables and possible other factors

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, Machineseeker – Trumpf TubeLaser 3000 – Ebertz Under 3,000 Laser Hours Fiber Tube Laser – Immediately Available Manufacturer: TRUMPF Model: TruLaser Tube 3000 fiber (T10) Year of Manufacture: 2020 Machine Number: A044D0013 Operating hours, approx.: 2,750 h (Laser on) TECHNICAL DATA: Max. outer diameter round tube: 152 mm (170 mm with jaw set) Max. circumscribed diameter rectangular tube: 170 mm Max. raw material length for automatic loading: 6,500 mm Machine bed for 6.5 m raw material length Max. finished part length: 4,500 mm Max. workpiece weight per meter: 18.5 kg (120 | 148[3] kg total) Laser: TruFiber 2001 – 2 kW (average power consumption 6 kW) Max. material thickness: - Mild steel: 8 mm - Stainless steel: 4 mm - Aluminum: 4 mm - Copper/Brass: 3 mm EQUIPMENT: - Through-feed chuck with self-centering clamping rollers - Workspace lighting - Feed station with self-centering jaws - Tube support (raw material) with automatically retractable rests - Tube support (finished parts) with extendable guide rollers - High-precision drives - Adaptive clamping technology for through-feed chuck - Eject station for 3 m finished part length (including scrap container) - Parts storage tray TRUMPF Laser • Excitation via pump diodes • Laser power control • Logbook function for laser • Enclosed beam guidance via laser light cable (LLK) Cutting Head • Lens cutting head with 150 mm focal length • Magnetic coupling Controller • TRUMPF controller based on Sinumerik 840D SL • Integrated technology data • Automatic on/off function • Tiltable operator panel with 19" touchscreen • Condition Guide • Remote support interface • Programmable cutting gas pressure Functions • AdjustiLine • NitroLine • FocusLine • ControlLine Data Transfer - Online Update Manager - RJ45 network interface - USB interface - Wireless Operation Point - Central Link Hsdpfxoxn Tn Ij Adash Safety - CE Marking (ex works) - Single and dual beam safety light curtains - Monitoring system for gas pressure, temperature, and cooling water - Protective cabin with laser safety windows EXTENDED STANDARD EQUIPMENT: • Solid-state laser TruFiber 2001 • Machine bed for 6.5 m raw material length • LoadMaster Tube for 6.5 m raw material length • Laser chiller (water-air) • Compact exhaust system Machine Accessories • Initial set of cutting nozzles • Ceramic part (1 piece) • Jaw set up to D152 mm/D170 mm • Guide rollers for round and rectangular tubes SPECIAL EQUIPMENT: - Increased finished part length (+1.5 m) including additional finished part support - SeamLine Tube with inner detection, weld seam detection on both inner and outer tube surfaces - Low-scratch LoadMaster Tube design, plastic rollers and strips - Adaptive clamping technology – feed station with additional clamping elements for clamping L and U profiles as well as flat material - MobileControl App This used machine can be viewed under production conditions. All information provided without guarantee – sale excluding any warranties or liability and exclusively in accordance with our General Terms and Conditions of Sale and Contract. Subject to prior sale.

Condition: new, ATiB HTUB 80/100-L RF Charger HTUB is the top-of-the-line RF charger designed for maximum performance. This range incorporates all the key features of RF chargers in terms of efficiency, power factor, ventilation, internal structure (dedicated 3 compartments), and overall flexibility. An integrated digital interface with an OLED display and built-in USB port provides the best and easiest overview/adjustment of charging parameters, diagnostics, and data reports. Key Features AC Mains Voltage: 480Vac (3ph) 50-60Hz / 600Vac (3ph) 50-60Hz Display: OLED/LCD display, 4 LEDs and 4 control buttons Settings: Via OLED display: current, capacity and 7 preset charging curves Via PC/laptop/USB connection: advanced programming Data Storage: Report on the last 50 charging cycles and important technical data (integrated USB port) Cooling System: Dedicated air cooling directly to the heatsink. Temperature-controlled Fan speed. Standby temperature within +104°F (+40°C) of internal components Efficiency: ≥ 92% Operating temperature: +32° to +104°F (0° to +40°C) Certification: CSA Hedpfxexuqrws Adaoh Safety Features Input protection: 3x Fast-acting AC fuses Output protection: Super-fast fuse (reverse polarity protection) Thermal protection: Probes on IGBTs, diodes, and power transformer (max. temperature adjustable) with derating Battery disconnect protection: Low-voltage safety shutdown (direct battery disconnection) Mechanical Specifications Dimensions: (L x W x H) 456 x 195 x 570 mm Protection rating: IP 21 (vertical) – Dedicated air cooling directly on the heat sink. Weight: 28 kg Find more items – new and used – in our shop! International shipping costs on request!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 25,000 h, laser power: 4,000 W, sheet thickness (max.): 20 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 114 mm, No reserve price – guaranteed sale to the highest bidder! Regularly serviced laser cutting machine with comprehensive accessories! TECHNICAL DETAILS X-axis travel: 3,000 mm Y-axis travel: 1,500 mm Z-axis travel: 114 mm Laser power: 4,000 W Working area: 3,000 mm Max. material thickness: 20 mm Xp stroke: 300 mm (max. 305 mm) Max. positioning speed parallel to axis: 120 m/min X-axis positioning acceleration: 9 m/s² Xp + Y-axis: 15 m/s² Cutting speed X-axis: 4 m/s Hodpfext Evnox Adaoh Cutting speed Xp and Y-axis: 15 m/s MACHINE DETAILS Control: Sinumerik 840D control Dimensions & Weight Dimensions: approx. 9,300 x 4,600 x 2,000 mm Weight: approx. 11,500 kg Laser hours: 25,000 h EQUIPMENT Cooling unit Automatic pallet changer Enclosed beam guide NitroLine high-pressure cutting FocusLine constant focal position Compressed air cutting PierceLine for reduced piercing time PlasmaLine plasma sensors SprintLine for rapid processing LensLine FlyLine ContourLine for small hole production Micro welding Spray device (unused/virgin) Positioning laser diode Programmable cutting gas pressure Automatic shut-off Work area lighting TruTops Laser lite CO2 laser TruFlow 3200 with high-frequency excitation Mirror telescope and maintenance-free turbo radial blower Laser control TASC 3 with logbook function and cooling unit Laser cutting head with 5" and 7.5" lenses, quick-change system ControlLine capacitive height monitoring and process control Error causes via diagnostic functions Additional laser cutting head with 3.75" lens for high-speed cutting Pallet changer system Note: The Trumpf LoadMaster shown in the photos is not included in the offer.

Condition: as good as new (ex-display), Year of construction: 2024, Machine dimensions: - (L x W x H) 9,350 mm x 2800 mm x 2300 mm, length with filter 5300 mm. Hjdpfxod N Rfds Adaoh Technical details: - Max. Sheet size: 3,048 x 1,524 Max. - Max. Sheet weight: 200 kg/m² -Laser power (IPG): 6 kW -Travel distance Z - axis: 125 mm -Max. Synchronization speed (X-Y): 141 m/min. -Max. Acceleration (X-Y): 10 m/s² - Positioning accuracy: ±0.05 mm - Repeat accuracy: ±0.05 mm Basic equipment: -Control: Siemens Sinumerik 840 D - Laser head: Precitec light Cutter F 125 Focus - Sheet position detection and measuring system -Positioning laser diode -Automatic plate changer -Automatic nozzle cleaner -Central lubrication unit - Chip tray - Software: Lantek, or Metalix Cad/Cam software with autonesting - Remote control: Remote maintenance Laser cutting options: - Pierceline (piercing settings) -Focusline - Plasmaline -Fastline - Flyline Options include: - Tower with 10 pallet positions - Automatic chip conveyor - Integrated camera (post-production of parts, micro-joints) - Air dryer - Auto. Nozzle Changer (automatic nozzle changer) - Inside camera