Used Diagnostic Tool Car for sale (45,078)

Condition: good (used), Glass laminating system Type: Vacuum glass laminating system HVD-G02 Nkodpfxedkp D Hj Ad Njt Vacuum glass laminating system Glass laminating system, with 2 heating devices TOOL TEMP Model type TT-138B, S/N 310-1877-1, 310-1877-2 Laminating area approx. 2,900 x 1,400 mm, with feed table, stainless steel Control cabinet, area approx. 2,600 x 1,250 mm Control tower PC, 17" LCD monitor ACER Model/type AL711, mouse, keyboard The system consists of the following main components: Vacuum chamber (chamber + lid) Pneumatic lid drive Transport roller conveyor Lifting device Heating plates Chamber frame Vacuum technology (pumping station, valves, lines, feedthroughs, measuring technology, etc.) Pressure water temperature control device (2 piece) Transport pallet Lifting frame Control with control panel Technical data: Step-by-step pumping via valves adjustable up to 0.01 mbar; Heating / cooling: time adjustable via control Heating temperature directly adjustable on the pressurized water temperature control device (max. 140

Condition: used, Avia FND-32N1 Tool Milling Machine. Nodpev R Ipcofx Ad Nekt Please check out our other listings as well.

Condition: ready for operation (used), Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT138 B SPEZ, used machine Manufacturer: Tool-Temp Type: TT138 B SPEZ Overall dimensions: 1240 × 480 × 1400 mm (incl. castors) Weight: Approx. 180 kg (empty) Properties: Self-optimizing electronic microprocessor controller (MP-888) with digital display (set and actual temperature) Nedpfx Aex Hgmwed Njkt Automatic temperature monitoring Electronic flow control with digital display and automatic minimum-flow control Pressure-increasing pump Temperature measurement at the mould Pressure relief system Leak stopper and mould drainage using compressed air Automatic filling (automatic medium fill) Max. temperature range: Water: up to 160 °C Heating capacity: 24 kW — switchable in stages (6/18), automatic switching of required heating power Cooling capacity: Indirect: approx. 85 kW at 160 °C Direct: approx. 60 kW at 60 °C Pump capacity: Motor: 1.8 kW Pressure mode: max. 6.5 bar | max. 75 l/min Vacuum mode: max. 8 m H₂O Seal-less magnetic coupling drive (no mechanical seal) Connections: Medium (water): ¾" BSP female thread Cooling water inlet: 1" BSP female thread (with water filter) Cooling water outlet: 1" BSP male thread Compressed air (for mould drainage/venting): ¼" BSP female thread

Year of construction: 2017, condition: excellent (used), Tool temp TT-142N/ MP-988 (2017) TOOL-TEMP TT-142 N – Full Equipment & Technical Specification (English) Application: Model N – water up to 140°C Pump with axial mechanical seal Nkodpfxsx E Uqbo Ad Nst Robust high-performance pressurized water temperature control unit Heating capacity: 12 kW Standard Equipment: 1. Temperature controller with self-optimization and digital display of set and actual temperature (°C/°F selectable) 2. Automatic temperature monitoring; alarm on deviation 3. Pump pressure gauge and system pressure gauge 4. Pressure reduction, venting, automatic water filling 5. Scale-resistant heat exchanger 6. Standard pump with axial mechanical seal 7. All water-contact components made from stainless steel or bronze 8. Heating elements switchable in stages 9. Safety features: automatic level control preventing dry running; mechanical safety thermostat; electronic maximum temperature limiter; main switch; isolation transformer; overload relay for pump protection; acoustic alarm 10. Visual fault indication 11. Unit on castor wheels Special Features: 1. Digital flow indicator with minimum-flow monitoring 2. Optional MP-988 controller with digital interface Technical Data: Temperature range: water up to 140°C Temperature regulation: microprocessor-controlled controller MP-888 with self- optimization; digital display of set and actual temperature; automatic temperature monitoring Flow monitoring: electronic, digital display, automatic minimum-flow alarm Heating capacity: 12 kW (6/6 kW switching stages) Cooling capacity: indirect approx. 60 kW at 140°C Pump performance: motor 1.8 kW; pressure mode max. 5 bar / 110 l/min; suction mode vacuum up to 8 m water column; no booster pump External temperature measurement: no Pressure reduction: yes Leak-stop / mold emptying: no Filling: automatic Connections: Medium: ¾” BSP female Cooling water: ⅜” BSP male (inlet with filter), ⅜” BSP female (outlet) Dimensions and weight: 870 × 360 × 915 mm (incl. wheels) Approx. 107 kg empty Color: zinc grey RAL 7001 Electrical versions: Available for all voltages from 3×200 V to 3×600 V, 50/60 Hz UL/CSA compliant For US market: NPT connections, controller display in °F Electronic Controllers: MP-888 (standard): °C/°F display; analog interfaces 0–5 V, 0–10 V, 4–20 mA; high-precision control via self-optimization; flow indication in l/min or gal/min; minimum-flow alarm MP-988 (optional): digital interfaces RS-485, RS-232, 20 mA loop, CAN-bus, Profibus; supports common communication protocols; temperature difference monitoring; display of up to three temperatures

Condition: used, Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT168 E, used machine Manufacturer: Tool-Temp Type: TT 168 E Overall dimensions: 710 × 325 × 785 mm (incl. castors and handles) Colour: Silvergrey RAL 7001 Weight: Approx. 67 kg (empty) Properties: Self-optimizing electronic microprocessor controller (MP-888) Digital display of set and actual values Automatic temperature monitoring Electronic flow control with digital display Automatic minimum flow control Suitable for both water and oil media Temperature range max.: Water: 90 °C Oil: 150 °C Heating capacity: Water: 12 kW / 18 kW (stages: 3/9, 9/9) Oil: 6 kW (stages: 3/3) Cooling capacity: 45 kW at 90 °C Pump capacity: Motor: 0.75 kW Pressure mode: max. 4.0 bar | max. 60 l/min Vacuum mode: max. 8 m H₂O Tank capacity: Min. 16 litres, max. 20 litres Connections: Nodpfx Aex Emfkjd Nekt Medium: ½" BSP female thread Cooling water inlet: ¾" BSP female thread (with water filter) Cooling water outlet: ⅜" BSP male thread

Condition: used, Tempering Unit, Liquid Tempering Unit, Industrial Tempering Unit, Thermolator, Tool-Temp TT134, Used machine Manufacturer: Tool-Temp Type: TT 134 Overall dimensions: 390 x 1030 x 1070 mm Year: 2012 Nkedpfx Adox Emd Te Not Properties: Self-control system (microprocessor) Automatic drain system Temperature monitoring and indication Automatic water filling Remote and internal temperature control Automatic air vent Water and oil medium operation Max. Temperature: 140 °C | 18–24 kW Cooling: 50,000 kcal/h Max. pump pressure: 4 bar | 100 l/min

Year of construction: 2017, condition: good (used), Temperature control unit Tool Temp TT-181 Stock no.: 503647 Machine/Device type: Temperature control unit Njdpfx Aox A Swqsd Nekt Manufacturer: Tool Temp Type: TT-181 Year of manufacture: 2017 Max. operating temperature: 150 °C oil Max. operating temperature: 90 °C water Heating capacity: 9 kW water / 3 kW oil Circulating medium: water or oil

Condition: good (used), Year of construction: 2018, Temperature Control Unit Tool Temp TT-181 Stock No.: 503645 Machine/Device Type: Temperature Control Unit Manufacturer: Tool Temp Model: TT-181 Year of Manufacture: 2018 Max. Operating Temperature: 150 °C Oil Max. Operating Temperature: 90 °C Water Heating Capacity: 9 kW Water / 3 kW Oil Nkodpfsx A Swksx Ad Net Circulation Medium: Water or Oil

Year of construction: 2017, condition: good (used), Temperature Control Unit Tool Temp TT-181 Stock No.: 503648 Machine/Device type: Temperature control unit Manufacturer: Tool Temp Model: TT-181 Year of manufacture: 2017 Max. operating temperature: 150 °C oil Nedpfx Aex A Sv Tod Nokt Max. operating temperature: 90 °C water Heating capacity: 9 kW water / 3 kW oil Circulating medium: water or oil

Condition: used, diameter div. Nodpfx Adexyzx Eo Nekt number 44x tool adaptor SK 40

Condition: used, diameter div. Nedpfx Adjxyzxxe Nekt number 44x tool adaptor SK 40

Condition: used, diameter div. number 44x Nksdsxyzxfepfx Ad Not tool adaptor SK 40

Condition: used, diameter div. number 44x Nkodpjxyzw Uefx Ad Not tool adaptor SK 40

Condition: good (used), Year of construction: 2025, Tool Temp TT 157 E see photos Nkodoxwukpopfx Ad Njt

Year of construction: 2018, condition: good (used), Temperature control unit Tool Temp TT-181 Nodpfxjxt Rfbs Ad Nokt Stock No.: 503646 Machine type/Device type: Temperature control unit Manufacturer: Tool Temp Model: TT-181 Year of manufacture: 2018 Max. operating temperature: 150 °C oil Max. operating temperature: 90 °C water Heating capacity: 9 kW water / 3 kW oil Circulating medium: water or oil

Condition: good (used), Year of construction: 2006, Belt sander 75 with pedestal Nksdsxyqi Tepfx Ad Njt

Condition: not inspected (used), functionality: unexamined, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned due to business closure. Placing a bid obliges the buyer to collect the item punctually between 26/01/2026 and 29/01/2026! Accessories include: approx. 36 tool holders, 2 tool carrier systems. Nkjdpfsxqmx Sox Ad Nst

Year of construction: 2013, condition: used, functionality: fully functional, Servo spindle press with screw station Nksdpfx Aswu Adbed Not Rittal Top Therm: SK3304500 Specification: V: 3x380-400 Watt: 25,900 Hz: 50 The Tool Temp TT-380 servo spindle press with screw station is an innovative and precise machine, ideally suited for demanding manufacturing processes. It stands out for its high accuracy and efficiency, making it a reliable solution for fast and precise screw connections. The integrated screw station enables efficient automation of the screwing process, while the servo technology ensures consistent force and motion control.

Condition: used, Year of construction: 2020, total length: 2,100 mm, Tugger Club Car Tempo Drive Electric Njdpfjxpx Uijx Ad Nokt Year built 2020

Condition: used, Year of construction: 2020, total length: 2,100 mm, Tugger Nedpjxpx T Eofx Ad Nokt Club Car Tempo Drive Electric Year built 2020

Condition: used, Year of construction: 2020, total length: 2,100 mm, Tugger Club Car Tempo Drive Electric Year built 2020 Nksdpoxpx Txofx Ad Net

Condition: new, Year of construction: 2022, total length: 2,800 mm, Tugger Nksdpsxpx Trefx Ad Net Club Car Club Car Drive Electric Year built 2022

Condition: new, Year of construction: 2022, total length: 2,800 mm, Tugger Nodpexpx Sbsfx Ad Nekt Club Car Club Car Drive Electric Year built 2022

Condition: used, Year of construction: 2020, total length: 2,770 mm, Tugger Club Car Tempo Nedpfx Aexpx N Tsd Njkt Drive Electric Year built 2020

Condition: used, Year of construction: 2022, total length: 2,800 mm, Tugger Club Car Club Car Drive Electric Year built 2022 Njdpfx Adjxpx Nmj Njkt