Used Demag Pk 1 for sale (520)

Condition: good (used), Manual trolley, trolley, crane trolley, trolley drive, crane trolley, trolley, girder trolley, monorail trolley -Crane chassis: Beam width: up to 175 mm -Load capacity: 1000 kg -Dimensions: see technical drawing in the photos -Number: 8x chassis available Price: per piece -Dimensions: 245/200/H190 mm Itodpsprb A Hofx Akxof -Weight: 7.6 kg/pc.

Condition: used, Crane remote control, radio receiver, receiver, crane radio remote control, radio control system, crane control, radio remote control Itedpfx Akjqh Edpjxef -Manufacturer: DEMAG Mannesmann Dematic, crane control PNN-BUS-3 -Type: RC-E 10 -Total dimensions: 380/180/H125 mm -Weight: 2.2 kg

Condition: good (used), Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, control switch for crane remote control with cable -Type: DST6DZP21 Isdpfx Aoxzqx Rekxjtf -Connector: Cable see photos -Transport dimensions: 660/200/H100 mm -Weight: 3 kg

Condition: good (used), Crane remote control, crane control, crane control, pendant control, control switch, control cylinder Itodpfxoxzq Tho Akxsf -Manufacturer: Demag, control switch for crane remote control with cable -Type: 6x Option key, 2-stage -Connector: 16-pin -Transport dimensions: 630/370/H140 mm -Weight: 5 kg

Condition: used, Gear motor, electric motor, three-phase motor Ijdpfoc Sxqhsx Akxjtf -Speed: 89 rpm -Power: 0.25 kW -Construction: B5 angle -Shaft diameter: Ø 15 mm -Protection class: IP 54 -Dimensions: 380/200/H150 mm -Weight: 14 kg

Condition: used, Indoor crane, crane, electric wire rope hoist, hoist, motorized winch, motor winch, tackle, pulling winch, pulley block -Transfer in current condition as seen -Operation is missing a switching element (can be installed at an additional cost) -Motors tested: and ok Iodpjd A Hgkefx Akxetf -Rated load: 1125 kg -Lifting speed: 6.3 m/min -Lifting height: 6.3 m -Dimensions: 1100/1000/H700 mm -Weight: 368 kg

Condition: used, Gear motor, electric motor Itsdpfsc Sxqksx Akxof -Speed: 185 rpm -Power: 0.25 kW -Construction: B5 angle -Shaft diameter: Ø 15 mm -Protection class: IP 54 -Dimensions: 380/200/H150 mm -Weight: 14 kg

Condition: used, Gear motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer engine DEMAG type: KBA-112-MB-6 -Manufacturer engine DEMAG type: KBL-71-A4 -Manufacturer gearbox DEMAG type: FG08-B-14-U-0-H1- -Power: 0.3/2.9 kW -Speed: 106/945 rpm -Construction: B14 -Diameter shaft: Ø 28 mm Ijdpocb E Trefx Akxetf -Protection class: IP 54 -Dimensions: 670/300/H500 mm -Weight: 102 kg

Condition: used, Year of construction: 1979, machine/vehicle number: Res BS, Demag PK2 Chain Hoist Crane Lifting Unit 250kg / 500kg Ijdpfxsvzkylo Akxjtf Approx. 40 units available!!! 250kg / 0.25t rated load / lifting capacity – single fall – 500.- 500kg / 0.5t rated load / lifting capacity – double fall – 600.- With 2 lifting speeds, lifting height approx. 3-4m Complete with pendant control and load hook Total weight approx. 40kg, 380V 50Hz connection Top condition, fully functional. Not a worn or used device! Connect and start operating. Comes from ongoing operations Item location: 75053 Gondelsheim See pictures

Year of construction: 1992, condition: used, Technical details: lifting capacity: 12,5 t Itsdpfxjvbh Rhs Akxsf span width: 9000 mm stroke speed: 5 / 0,8 m/min rope diameter: 14 mm lifting height max. hook position: 10.000 m total power requirement: 13,6 kW weight of the machine ca.: 5,2 t dimensions L x W x H: Brücke: ca. 10,3 x 2,2 x 2,3 (3,15to) m dimensions L x W x H: Laufträger Nr.1: ca. 4,38 x 0,8 x 0,7 (1,01to) m dimensions L x W x H: Laufträger Nr.2: ca. 4,38 x 0,8 x 0,7 (0,99to) m dimensions L x W x H: Pal. Zubehör ca. 4,2 x 0,8 x 0,4 (0,16to) m Crane classification according to DIN 15018H2B3 Crane trolley: DEMAG type RF 400; type KBF 100 A8/2, travelling speed 12.5 / 50 m/min., size of travel wheels Ø 200mm (16 pcs.) Main hoist trolley EKDH 532 H20 KV3-4/1 F6; type KBF 90 A8/2, travelling speed 5 / 20 m/min., size of travel wheels Ø 160mm (4 pieces) DEMAG DH5 32 hoist; lifting height 10,000 mm; braked with sliding carriage; main lifting speed 5 / 0.8 m/min. Single hook size 5 with rope safety device Rope Ø 14mm; rope length 46 metres; drive unit group 1Bm Bridge Hoisting gear Trolley/crab Wireless remote control and conventional control *

Condition: good (used), 25 HP, 10 bar, 2570 l/min Isdpfoxliv Asx Akxstf

Condition: used, Electric hoist, crane, electric wire rope hoist, wire rope winch DEMAG type P 10 Serial no. 941 477 Year of construction 1962 Lifting capacity 2000 kg with 4 ropes Lifting height 5 meters Lifting speed 6 m/min. Fine lifting speed 1.3 m/min. Reeving 4/1 Motor power 0.6 / 2.6 kW Mains connection 380 Volt, 50 Hz - DEMAG hoist, type 19/11 K28P - Electric trolley DEMAG, type 13 / 6 K8 - 1 Travel speed approx. 19 m/min - Trolley for double T-beams, beam width 120 to 180 mm - Load hook for 4 load lines - Operating cylinder for the hoist with approx. 2.5 meter cable length Space requirement L x W x H 1400 x 900 x 500 mm Weight 350 kg Isdpfx Akor E Ht Hjxetf Good condition

Condition: used, Year of construction: 2020, machine/vehicle number: 001646U en 001647U, For sale 2x used Demag single girder overhead cranes 13,325mm x 10,000 kg. These two cranes were installed together in one hall and feature tandem control. We can optionally supply the cranes including: * Installation and inspection * Power supply rails * Radio remote control * Master/master controls Jan Reiling B.V. also delivers new cranes fully customized at very competitive prices. * overhead cranes * suspension cranes * jib cranes * KBK rail cranes * boat lifts All our new and used cranes delivered with installation come with warranty! Additionally, we maintain our own stock of approx. 15,000 Demag spare parts. For more information, please visit the website of Jan Reiling B.V. Cranes, crane, overhead crane, workshop crane, warehouse crane, hoist, industrial cranes, universal crane, lifting equipment. Overhead crane, laufkrane, bridge crane. Single girder, einträger, single girder. Itsdeya Ag Sjpfx Akxof Chain hoist, kettenzüge, chain hoists.

Year of construction: 2017, condition: excellent (used), machine/vehicle number: SI8x4125, DEMAG KBK crane canopy crane runway with dimensions approx. 6x5m (5m bridge) This crane is available several times ! Payload / lifting capacity 125 KG - 0,125to Technical data of the system: Crane runway made of Demag KBK1 + KBK2L rails System is supplied complete: KBK rails, rail connectors, trolleys, end plates, brackets/hangers etc. Crane is with internal power supply Iodpfx Akoupwa Rsxetf incl. 125KG Demag DC chain hoist - lifting height approx. 3.5m Crane is disassembled and immediately available Used condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Other KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with load capacity and dimensions without obligation.

Condition: used, Year of construction: 1999, Technical details: Itodpewvkggjfx Akxef screw size: 45 mm injection shot weight in Polysterol: 149 g/PS closing pressure: 100 kN

Condition: used, Year of construction: 1999, Technical details: screw size: 45 mm injection shot weight in Polysterol: 149 g/PS Itodpfowvkgmox Akxof closing pressure: 1250 kN

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, machine/vehicle number: MIKA272, Technical data: 1 Demag / Timmer KBK 100 column-mounted slewing crane, rated load 125 kg Load capacity vacuum lifter: 40 kg Height: approx. 3 m, lower edge of jib: approx. 2.65 m Jib outreach: approx. 3 m, vacuum lifter lifting height up to approx. 1.8 m Weight: approx. 350 kg With Timmer vacuum lifter incl. vacuum unit, load capacity 40 kg Itodpfxox U N Ite Akxsf Ideal for order picking or repacking Connection: 400V, 16A, slewing range 270° Crane is dismantled and packed on a pallet Very good condition, see pictures Item location: 75053 Gondelsheim Only the crane system visible in the pictures is for sale Shipping via freight forwarder or collection by appointment

Condition: excellent (used), Hoisting unit Manufacturer: DEMAG Type: P 416 H7/2 3.2 t with trolley Load capacity: 3,200 kg Hook travel: 7 metres 2 lifting speeds: 8 / 0.8 m/min Year built: 1978 Isdpfx Ajx Ncptskxotf Trolley travel speed: 14 m/min

Year of construction: 2002, condition: excellent (used), machine/vehicle number: BN999, Demag indoor crane gantry crane bridge crane incl. steel construction + floor control system Steel structure approx. 11.6 x 6.4 m with Demag KBK II - R crane runway with 2 bridges Payload/lifting capacity 2x 250Kg, incl. 1x 250Kg Demag DK chain hoist Technical data of the system: Crane runway/steel construction consisting of HEA140 girder incl. 2 platforms with railings Length of outer edge of steel construction approx. 11.6m Total width outer edge (steel construction) 6.4m Inner edge of steel construction 3.5m Total height of steel structure/crane 4.6m Column height 4m with 30x30cm base plate Bottom running rails 4m Top of bridge 3.95m Bottom of bridge 3.77m Hook height 3.4m Track width approx. 3.6m Rail length approx. 11m Distance between supports: See sketch (4.8m + 5.9m) Iodpfxou I Uk Ss Akxotf System is supplied complete: Steel construction complete with props and 2 platforms Demag KBK system Crane is disassembled and immediately available, color blue total weight approx. 5 tons Location 75053 Gondelsheim Very good condition, see pictures Shipping by freight forwarder or pickup by appointment only

Year of construction: 2016, condition: as good as new (ex-display), machine/vehicle number: KBK FFM, DEMAG KBK 2 - crane sky crane runway indoor crane Pictures shows an example crane runway with the below components. These are also available individually! Please ask your crane runway about your dimensions Payload / lifting capacity from 80 125 250 500 to 1000 Kg KBK 2-R turnouts left and right (with conductor rail) Itsdpemmbn Tefx Akxef KBK 2-R swivel discs 890mm (with conductor rail) KBK 2-R rails curved 15 30 45 60 90 degrees (with conductor rail) KBK 2-R rails (with conductor rail) The system can be delivered completely according to your wishes Rails, rail connectors, trolleys, end plates, drag cables, holders/hangers, accessories are available Chain hoists on request Very good, almost new condition Shipping by forwarding possible Demag KBK1 KBK2 and KBK3 rails are stock items!

Year of construction: 1996, condition: used, machine/vehicle number: MBMAKZ, Demag chain hoist Crane hoist 250Kg DKUND 2-250 K V1 with double chain 125Kg payload each 250KG / 0.25t payload / lifting capacity - 1 fall Distance between the two lifting chains approx. 1.2m (can also be shortened) Lifting height approx. 3.5m Complete with control cylinder (approx. 3m) Weight complete approx. 60 kg, connection to 400V 50Hz TOP condition, fully functional. No worn or used device! Iodpstn Rirefx Akxetf Connect and put into operation. Comes from current operation Item location is 75053 Gondelsheim See pictures

Condition: good (used), Column jib crane, overhead crane, workstation crane -Manufacturer: DEMAG, Column jib crane, lifting capacity 250 kg -Base plate: 550 x 550 mm -Protrusion: 2,860 mm -Total height: 5110 mm -Hook height: 3170 mm -Swivel range: 270° -Chain hoist: can be supplied for an additional charge Itsdpslb Iv Tsfx Akxsf -Transport dimensions: 5110/800/H550 mm -Weight: 380 kg

Condition: excellent (used), Year of construction: 2020, Pillar jib crane, indoor crane, workstation crane -Manufacturer: Demag, pillar jib crane load capacity 125 kg -Base plate: 350 x 350 mm Isdpfx Akoxmi R Aexotf -Thrust: 2,000 mm -Total height: 1,780 mm -Hook height: 840 mm -Chain hoist: DEMAG type DC-Com 1 125 1/1 H4 V8/2 -Main stroke: 8.0 m/min -Fine stroke: 2.0 m/min -Transport dimensions: 540/2100/H500 mm -Own weight: 176 kg

Year of construction: 2002, condition: good (used), machine/vehicle number: RHKBK125KG, DEMAG KBK crane sky crane runway dimensions approx. 6x5m Payload / lifting load 125 KG - 0.125ton Technical data of the system: Crane track made from Demag KBK2-L rails The system is delivered complete: KBK rails, rail connectors, chassis, end plates, cable drags, holders/suspenders etc. including Demag DK 125KG Manulift one-hand chain hoist Iedpforft Nlox Akxetf Crane is dismantled and available immediately Used condition, see pictures Item location is 75053 Gondelsheim Shipping by courier or collection only by appointment Demag KBK1 KBK2 and KBK3 rails are stock items! Other KBK systems are also available. Payload 125KG - 1600KG Please request your crane runway with load capacity and dimensions without obligation.

Condition: used, Year of construction: 2001, operating hours: 58,764 h, functionality: fully functional, machine/vehicle number: 502748, clamping force: 1,000 kN, screw diameter: 30 mm, clearance between the columns: 420 mm, displacement volume: 144 cm³, injection pressure: 1.905 bar, ejector force: 41 N, ejector stroke: 150 mm, opening stroke: 500 mm, plate length: 590 mm, plate width: 590 mm, installation height: 250 mm, total length: 4,550 mm, total width: 1,450 mm, total height: 2,000 mm, overall weight: 4,800 kg, heating capacity: 9 kW (12.24 HP), pump power: 30,000 W, height adjustment type: hydraulic, stroke length: 150 mm, tool height: 250 mm, tool weight: 700,000 g, Equipment: documentation/manual, Demag ERGOtech Injection Moulding Machine ERGOtech 100-420-200 NC4 Year of manufacture: 2001 Asking price: €8,000.00 – WITHOUT Wittmann peripheral equipment The injection moulding machine is in good condition and ready for operation. For sale is the ERGOtech 100-420-200 NC4 injection moulding machine. Optionally, all corresponding Wittmann peripheral devices can be included at an additional charge. We purchased the Demag ERGOtech in 2020 during our company expansion to fulfill a customer order and equipped it with matching Wittmann peripheral devices. The machine has been serviced on-site by a DEMAG service technician and is free from defects. OPTIONAL: We also offer for sale all associated Wittmann peripheral equipment: Peripheral Equipment from WITTMANN BATTENFELD Deutschland GmbH: Wittmann Tempro Plus D160 – Dual-circuit temperature control unit TEMPRO-PLUS-D-Standard-2-160 DEMONSTRATION UNIT – used, no defects Equipped with: 2 pcs. Reinforced pump TemproPlus D160-1.0kW (2.4A) 60l 1 pc. Ultrasonic flow measurement 140-180° 1 pc. Digital interface 20mA 1 pc. Packaging for temperature control unit Original price: €6,980.00 Sale price: €3,490.00 Wittmann Compact Chiller Coolmax C30 WITTMANN WATER CHILLER SERIES: COOLMAX C30 DEMONSTRATION UNIT – used, no defects Original price: €4,750.00 Sale price: €2,375.00 Iodpfstltvzex Akxotf WITTMANN BATTENFELD Deutschland GmbH Drying and dosing accessories - 1 pc. DRYMAX-PRIMUS: E30-70-M for drying plastic granules - 2 pcs. FEEDMAX-S:3NET for conveying free-flowing plastic granules, hinged lid with integrated collector motor - 1 pc. HOPPER: MT203 machine hopper 203 for mounting a series 200 separator - 1 pc. DOSIMAX: MC 18 dosing unit for free-flowing granulate Condition – NEW – Unused Original price: €8,467.00 Sale price: €4,233.50 All prices are exclusive of the statutory 19% VAT. PLEASE NOTE: The offer does not include relocation or transportation costs for the machine. These services can be offered and organised separately upon request. For further questions, please feel free to contact me at any time.