Used Demag Df 45 C for sale (513)

Year of construction: 2019, condition: ready for operation (used), This DEMAG Systec 210/580-840 was manufactured in 2019. It's a hydraulic injection moulding machine with a clamping force of 210 tons and a power output of 60 kW. It has been used for 31,132 operating hours. Consider the opportunity to buy this DEMAG Systec 210/580-840 hydraulic injection moulding machine. Contact us for more information. • The dosing unit (orange part) is not included. • Integrated socket combination, country-specific, • can be switched off via main switch and shutdown program • 2 x Schuko 1Ph/230V/16A; 2 x IECEE 3Ph/400V/16A residual current device • Pneumatic 5/2 valve No. 1 on movable mold clamping plate; • programmable, supplied via central air connection • includes hoses. Inputs and outputs freely programmable; 3 inputs and 3 outputs; • Terminal point outside the control cabinet • Interface for additional nozzle heating band; socket only Lodpsx D Nluefx Anuoac • 2-circuit core puller via switching valve on movable mold clamping plate; Q-independent (programmable); • With pilot-operated check valves to prevent core creep • Mold connection dimensions E (similar to Euromap March 96) • With side ejector plate, centering diameter of fixed platen: 160 mm • Centering diameter of movable platen: • Mold installation height increased by 100.0 mm • Min: 340 mm • Max: 790 mm

Year of construction: 2005, condition: ready for operation (used), This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 was manufactured in 2005. It features a central accumulator for high-speed injection and chromed tie bars. The pump drive power is 22.0 kW, with a mains voltage of 400 V/50 Hz. It includes a color data display with VGA interface, an oil cooler, and electric screw drive. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis S 250/630-1450 hydraulic injection moulding machine. Contact us for more information. • 5x similar units available • Central accumulator for high-speed injection; core, ejector, and nozzle movement • Nozzle movement parallel to mold movement • Chromed tie bars on clamping unit • Pump drive power: 22.0 kW • Mains voltage: 400 V / 50 Hz, 3 Ph + N + PE • Separate mains connections for drive and heating • Control: color data display with VGA interface and AT keyboard interface • Injection, holding pressure, and back pressure via servo valve • Reinforced oil cooler • Separate water connections for mold and oil cooling Lasdpfxjx D Rqro Anujc • Compliance: Basic version Europe, according to valid safety regulations • Painting: Bottom anthracite grey RAL 7016; Top blue 571C MD • Elastic machine mounting • Ultrasonic displacement measuring system with digital data transmission for injection, ejector, mold (WZ), and nozzle (AWH) movements; 1/100 mm resolution for injection axis • Reduced centering diameter (D=100/125) for fixed mold platen • Mold connection dimensions type E (similar to EUROMAP), without side ejector plate • Standard mold installation height • Safety interlock: mold opening and ejector forward only with closed safety door • Ejector with position control via proportional valve; pressure and velocity independently programmable • Electric screw drive, frequency-controlled

Condition: ready for operation (used), Year of construction: 1995, operating hours: 122,158 h, clamping force: 3,300 kN, screw diameter: 60 mm, This DEMAG ET 330 - 1450 hydraulic injection moulding machine was manufactured in 1995. It features a clamping force of 3300 kN and a screw diameter of 60 mm, providing robust performance for various applications. The machine includes a Wittmann W322-121 linear robot for enhanced automation. Consider the opportunity to buy this DEMAG ET 330 - 1450 hydraulic injection moulding machine. Contact us for further details. • Clamping unit: • Locking force: 3630 kN • Tie bar spacing (H x V): 710 x 630 mm • Platen dimensions (H x V): 1040 x 950 mm • Mold installation height: min 330 mm / max 830 mm • Opening stroke: 675 mm • Platen distance (daylight): 1505 mm • Permissible mold weight: fixed side (DS) 1200 kg; moving side (AS) 2400 kg; total 3600 kg • Ejector: stroke 200 mm; force 80 kN; retraction force 35 kN • Core pull control: yes (2 units, on ejector side/AS) • Shut-off nozzle: yes (hydraulic/pneumatic 1/1) • Injection unit 1: • Unit code: 1450-60 • Screw diameter: 60 mm • Injection pressure: 1905 bar • Stroke volume: 763 ccm • Shot weight (PS): 695 g • Screw L/D ratio: 20 • Nozzle radius: 15 mm • Max dosing stroke: 270 mm • Plasticizing flow: 41 g/s Ledpsyg Nkwofx Anujac • Configuration/controls: • Armored (wear-resistant) injection unit: yes • Pneumatic ejector: yes • Process control: SPC (Yes/Yes) • Printer interface: integrated • Hot runner control: 0-zone (none) • Maintenance: • Hose replacement performed in 2017 Additional equipment • Wittmann W322-121 CNC linear robot/removal device (included with the machine) • Travel paths: Y-axis 1600 mm, X-axis 500 mm, Z-axis 2500 mm

Condition: ready for operation (used), Year of construction: 2004, operating hours: 91,810 h, clamping force: 2,500 kN, screw diameter: 60 mm, injection weight: 579 g, This DEMAG ET250/630-840 Concept was manufactured in 2004. It features a clamping force of 2500 kN and a locking force of 2750 kN. The machine includes a Wittmann linear robot and supports a maximum mold weight of 3300 kg. It's equipped with a screw diameter of 60 mm and offers a shot volume of 636 ccm. Consider the opportunity to buy this DEMAG ET250/630-840 Concept hydraulic injection moulding machine. Contact us for more information about this machine. • Locking force: 2750 kN • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions (H x V): 950 x 950 mm • Mold height: 330–830 mm • Opening stroke: 675 mm • Max daylight (distance between platens): 1505 mm • Mold weight capacity: fixed side 1100 kg, moving side 2200 kg (total 3300 kg) • Ejector: • Stroke: 200 mm • Force: 80 kN • Centering ring diameter: 200 mm • Pneumatic ejector: yes • Core pulls: 2 on moving side (AS) • Injection unit: Laodpfx Anoyfq Aloujc • Unit size: 840 • L/D: 20 • Shot volume: 636 cm³ • Injection pressure: 1351 bar • Plasticizing rate (PS): 74 g/s • Screw speed: 326 rpm • Nozzle radius: 15 mm; nozzle bore: 3 mm • Max dosing stroke: 225 mm • Note: Second injection unit listed with no data → single-component machine • Interfaces/controls: • Printer interface: yes • Process control/SPC: yes Additional equipment • Robot/handling: Wittmann W633-961 linear robot • Stroke: Y (vertical) 1600 mm, X 900 mm, Z 2500 mm • Hot runner control: 9 zones • Mold sensing: Kistler pressure (p=1) / temperature (t=0) system • Valve gate control: hydraulic (pneumatic not equipped)

Condition: used, Year of construction: 2002, Opportunity to buy a DEMAG injection moulding machine with 1000T clamping force and 140000 working hours. Can be inspected under power upon appointment. Availability: 06/2026 Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection. Clamping force: 1000 tons Opening stroke: 1250 mm Min. mold height: 500 mm Max. mold height: 1200 mm Distance between tie rods: 1400 × 1120 mm Plate size: 1950 × 1670 mm Screw diameter: 80–110 mm Injection volume: ± 2000–3800 cm³ Shot weight (PS): ± 1800–3400 g Injection pressure: up to ≈2380 bar Total weight: 72.5 tons (72,500 kg) Total length: 13,184 mm Total width: 3,175 mm Total height: 2,925 mm Max. pressure ($P_{max}$): 190 bar Ljdpfx Anoyq Dqgoueac Max. flow rate ($Q_{max}$): 486 l/min System current: 409 A Heating current: 154 A

Condition: excellent (used), Year of construction: 2007, operating hours: 70,000 h, functionality: fully functional, machine/vehicle number: ERGOTECH 200 - 840, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 560 mm, displacement volume: 442 cm³, mold height (min.): 340 mm, plate width: 860 mm, plate height: 860 mm, pump power: 30,000 W, The machine is fully operational and was working with injection until the end. Lsdpoyxn Tvefx Anuoac

Condition: new, Year of construction: 2019, functionality: unexamined, machine/vehicle number: 40906979, Multiple units in stock. The products are new and unused. Ledpoywy Dwefx Anuoac

Condition: new, functionality: fully functional, Batch of various remote control models available. See photos. For each product it varies whether it is new or used. Can be purchased individually or as a lot. For price information per product, please send a message. We have multiple units of everything in stock. Ledpfxeywyyxs Anujac

Condition: good (used), Crane system with two fixed (l= ~6.000 mm) and three running rails (l= ~6.000 mm) with trolleys which allow the mounting of log clamps with hoist. Lodpfxeg Dgh Ie Anuoac Max weight per rail = 1.000 kg. Mounted from ceiling (no supporting steel structure included). Power supply via integrated conductor line inside the rails (no external wires). Compressed air with outside air pipes (not inside the rails). Option: chain hoist with log clamp to lift logs from a pallet onto a stream feeder.

Condition: good (used), Crane system with two fixed (l= ~7.000 mm) and three running rails (l= ~6.000 mm) with trolleys which allow the mounting of log clamps with hoist. Max weight per rail = 1.000 kg. Mounted from ceiling (no supporting steel structure included). Power supply via integrated conductor line inside the rails (no external wires). Compressed air with outside air pipes (not inside the rails). Ledpfeg Dgdvox Anueac Option: chain hoist with log clamp to lift logs from a pallet onto a stream feeder.

Condition: good (used), Crane system with two fixed (l= ~7.000 mm) and three running rails (l= ~5.000 mm) with trolleys which allow the mounting of log clamps with hoist. Tilt prevention system allows smooth and perfectly parallel displacing of the running rails. Max weight per rail = 1.000 kg. Mounted from ceiling (no supporting steel structure included). Power supply via integrated conductor line inside the rails (no external wires). Compressed air with outside air pipes (not inside the rails). Laedpfxsg Dghcj Anusc Option: chain hoist with log clamp to lift logs from a pallet onto a stream feeder.

Condition: good (used), Crane system with two fixed (l= ~14.000 mm) and three running rails (l= ~6.000 mm) with trolleys which allow the mounting of log clamps with hoist. Tilt prevention system allows smooth and perfectly parallel displacing of the running rails. Max weight per rail = 1.000 kg. Mounted from ceiling (no supporting steel structure included). Lodeg Dgg Rjpfx Anuoac Power supply via integrated conductor line inside the rails (no external wires). Compressed air with outside air pipes (not inside the rails). Option: chain hoist with log clamp to lift logs from a pallet onto a stream feeder.

Condition: excellent (used), Chain Hoists - DEMAG / STAHL - 14 units: 1. Demag DKUN 10 - 2.5 t. Ljdpfx Anjyvwbwoueac 2. Demag PK10 - 2 t with electric travel trolley, control box, cables. 3. Demag PK 10 - 1000 kg. 4. Demag DKUN 5 - 500 kg. 5. Demag D-BE - 160 kg. 6. Demag PK 2 F - 500 kg. 7. Demag PK 2 N-F - 250 kg. 8. Demag chain hoist - 3 units: 1. Demag DKUN 2 - 250 kg. 2. Demag PK 2 N - 500 kg. 3. Demag PKVUN 1 - 125 kg. 9. Demag PK 1 N - 125 kg. 10. Demag Motor PKUN 1 - 125 / 250 kg. Stahl chain hoists: 1. Stahl T 405 M - 1000 kg. 2. Stahl T 302 S - 500 kg.

Condition: new, Bottom blocks / crane hooks / hooks – 53 pieces: Bottom block – 40 tons for DH / DR / DMR (price and photos on request) Bottom block – 32 tons for DH 2000 / P2000 (price and photos on request) 1. Bottom block – 20 / 25 tons – (1 piece). 2. Bottom block – 12.5 tons – (1 piece). 3. Bottom block – 12.5 tons (without hook safety latch) – (1 piece). 4. Bottom block – 10 tons – (2 pieces). 5. Bottom block – 6.3 tons – (1 piece). 6. Bottom block – 12 / 10 tons / 6.3 tons / 3.2 tons / 2.5 tons – (3 pieces). 7. Bottom block – 5 tons / 3.2 tons – (2 pieces). 8. Bottom block – 4 tons (2 pieces, unused with storage marks). 9. Bottom block – 3.2 tons (2 pieces, used). 10. Bottom block – 2.5 tons, without hook (2 pieces). 11. Hook for chain hoists – 2 / 2.5 tons (1 piece). Abus bottom block / hooks: 1. Abus bottom block – 30 tons (used). 2. Abus bottom block – 12.5 tons (new, without hook safety latch). Ledsyvvbcepfx Anusac Konecranes bottom block – 5 tons (used). Hook – 150 tons (2 pieces, new). Hook – 40 tons (1 piece, new). Hook size no. – 2.5 (1 piece). Hook – 15 pieces. Hook – 12 pieces. Hook – 15 pieces.

Condition: excellent (used), DEMAG / ABUS / STAHL / KONECRANES / SCHNEIDER / TELEMECANIQUE – Pendant control stations / Pendant pushbutton stations / Empty enclosures: DEMAG Pendant Control Station / Pendant Pushbutton Station: 1. Type: DST 9 / DST 6/7 / DST 6 / DST 3 – 27 units (used). 2. Type: DRC10 2ST D3 – 2 units (new). 3. Type: DSE 10CS – 1 unit (new). Ledpfoyvuakjx Anuoac 4. Type: DST 9 SP222 – 1 unit (new). 5. Type: DSE 8 P222BE – 1 unit (used). 6. Type: DCS – 1 unit (new). ABUS Pendant Control Station / Pendant Pushbutton Station: 1. Type: 70268 – 2 units (new). 2. Control cable Type: SC15X1 L., 2000 mm – 2 units (new). STAHL Pendant Control Station / Pendant Pushbutton Station: 1. Type: STH 1202 - 021 – 1 unit (new). 2. Type: STH 1202 - 021 – 1 unit (used). KONECRANES – 1 unit (new). SCHNEIDER Pendant Control Station / Pendant Pushbutton Station: 1. Type: XACA 1436217 – 1 unit (new). TELEMECANIQUE Pendant Control Station / Empty Enclosures: 1. Type: XAC A08 – 2 units (new). 2. Type: XAC B02 – 2 units (new). 3. Type: XAC B06 – 1 unit (new). 4. Type: XAC B04 – 1 unit (new). ROTARY SWITCH – pushbutton – 1 unit (original packaging).

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, overall weight: 11,800 kg, total length: 16,700 mm, load capacity: 10,000 kg, working height: 11,350 mm, lifting height: 11,350 mm, Equipment: documentation/manual, Demag overhead crane – Type: double-girder – Capacity: 2x 5,000 kg – Lifting height: 11.35 m – Year of manufacture: 2021 – Hoist type: wire rope hoists – FEM/ISO hoists: 2m / M5 – Manufacturer: Demag / Siempelkamp Laedpsyvr Hujfx Anuoc Dimensions – Span: 16,700 mm (center-to-center) – Total length: 17,000 mm – Installation height: 1,600 mm – Width: 3,860 mm – Wheelbase: 3,150 mm – Suitable for crane rail: A55 / 50 x 30 mm – Net weight: 11,800 kg Speeds – Hoisting: 8/1.3 m/min – Trolley travel: 20/5 m/min – Crane travel: 40/10 m/min Features – Control: radio control – Crane manual available: yes – Electrical diagrams available: yes – Condition: in very good condition. – Disassembled: yes, available immediately – Special features: 8.5 ton Equator with carousel available as option

Condition: used, Suspension crane runway Crane system made of aluminum system profile similar to GIS GISKB ALU, EEPOS, KITO ProSystem, ERIKKILA No DEMAG but similar to KBK Overhead monorail system with single girder crane bridge Light crane system made of aluminum system profiles Load capacity: 125 kg Span: 3.2 meters as single girder bridge Profile height: 155 mm Profile width: 100 mm - Natural anodized aluminium profiles - Carriage with smooth-running plastic rollers - Power supply via trailing cable on the wire rope Consisting of: 2 pieces of 4.8 meter aluminum system profile for the longitudinal track with 3 suspension eyelets each 1 piece of 3.35 meter aluminum system profile for the crossbeam (single girder bridge) with 2 suspension eyelets 1 trolley for crane suspension on the crossbeam 1 carriage on the longitudinal beams (2 pieces) 6 end covers suitable for the profile rails Weight of profile rails: 125 kg Very good condition, as good as new Hoists can be found in our WebShop under the search term "chain hoist" You can find suitable assembly material in our WebShop under the search term "KBK" Laodsuch Rfopfx Anusc

Condition: used, Year of construction: 2003, clamping force: 150 kN, displacement volume: 399 cm³, injection pressure: 1,598 bar, overall weight: 7,500 kg, screw conveyor diameter: 50 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Laodpfx Aeylz Aionuoc

Condition: excellent (used), DEMAG / ABB / TELEMECANIQUE – Frequency Converters / Inverters – 11 units: Lasdpoyu S Alsfx Anujc 1. DEMAG Type - ACS800 04M-0140-3+D150+E210+H355+H356+H360 with resistance unit (new) – 1 unit. 2. DEMAG Type - ACS800 04M-0210-3+D150+E210+H355+H362+N672 with resistance unit (used) – 1 unit. 3. DEMAG Type - UD DPU415V024E10 – 1 unit. 4. TELEMECANIQUE Type - ATV 58ED23N4 – 15 kW (in original packaging). 5. DEMAG Type: ABB – ACS 800 – 2 units. 6. DEMAG Type: ABB – ACS 800 – 1 unit. 7. VACON / AC DRIVE – 3 units. 1. VACON Type: X4K40400C 2. VACON Type: XX4K440075C 3. AC DRIVE Type: X4K40075C1 8. AC DRIVE Type: X4 – 1 unit.

Condition: excellent (used), functionality: fully functional, Year of construction: 1986, machine/vehicle number: MIKA-CN, Technical specifications: 1x Demag KBK 1 pillar jib crane, rated load 125 kg with Demag DC chain hoist (125 kg - year 2007) Load capacity at full outreach: 125 kg Laedpjyu E I Ijfx Anusc Height: approx. 3.05 m Underside of jib: approx. 2.55 m Outreach: 3 m Hook height: approx. 2.15 m Total weight: approx. 300 kg Equipped with 125 kg Demag DC chain hoist Including pin, cable drag chain, trolley, end cap, etc. Slewing range 300°, connection to 400V 16A Crane is dismantled and available immediately Item location: 75053 Gondelsheim Additional cranes with load capacities from 80–5000 kg available, please enquire See photos Shipping via freight forwarder or collection by appointment only

Year of construction: 2007, condition: used, Offer 22111 Technical specifications: - HADEF Type CH 2 hoist, built in 2007, load capacity 500 kg - Portal load capacity 500 kg - Hook height approx. 2450 mm - 2 lifting speeds 8.0 + 2.0 m/min - Manual trolley - Clearance between the traveling columns approx. 2750 mm - Clearance height at the bottom edge of the portal beam approx. 2900 mm - Mobile beam approx. 1500 mm - 4 swivel casters - Total width approx. 3050 mm - Total depth approx. 1500 mm - Total height approx. 3050 mm Ljdpfx Ansv S Du Rjuoac - 400 V drive - Total weight – crane + hoist approx. 250 kg

Year of construction: 2024, condition: new, Demag NC3 panel new never used width- 30cm height- 5cm length- 50 cm Demag Ergotech system 3 panel Lasdpfjqvuinsx Anusc

Year of construction: 2024, condition: new, Demag Panel NC3 Made in Germany width-30CM height-5CM length-50CM TYPE: 6EJ5 398-0DE14 Demag spare part panel Ledeqvuigspfx Anusac

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: TH2000MessraumRES, DEMAG KBK Crane System Overhead Crane Runway 9.3 x 5.3 m (Bridge travelling path approx. 5 m) The crane is also available in various other dimensions, multiple units in stock with elevated carriages. Load capacity / Lifting capacity: 500 KG Technical data of the system: Ledpov Iai Nefx Anusac Crane runway made from Demag KBK2 profiles with elevated carriage – crane girder is located between both running rails for maximum lifting height with internal power supply !! System is delivered complete: KBK profiles, profile connectors, carriages, end plates, drag chain (internal conductor rail system optional!) brackets/suspension elements etc. including Demag DK chain hoist, capacity 500 KG Crane is dismantled and immediately available Various cranes in stock Good condition, see pictures Item location: 75053 Gondelsheim Shipping via freight forwarding or collection by prior arrangement only Demag KBK1, KBK2 and KBK3 profiles in stock! Other KBK systems with different capacities also available. Load capacities from 125 KG to 1600 KG Please request your required crane runway with load capacity and dimensions without obligation.

Condition: new, functionality: fully functional, machine/vehicle number: Nadelverschlussdüse ( Federbetätigt ), Needle shut-off nozzle (spring-operated) Thread M60x3 Ref. G70 1198 / 392/199 Condition New Lsdpjv Ancgsfx Anueac