Used Demag 500 for sale (513)

Condition: excellent (used), Year of construction: 2014, Clamping force: 650 t Screw diameter: 60 mm Distance between tie bars V: 1020 mm Distance between tie bars H: 1020 mm Working hours: 50.000 h Type: Horizontal Drive: Hydraulic \+ Cooling water flow controller (2x 6 circuits) Hfodpfx Agjyzylvefsf \+ Robot Sepro SR SDR5X35 HL S5 TRANS (2014) \+ 2x Magnetic platten

Condition: good (used), Year of construction: 1993, Overhead crane, crane, trolley, crane running gear, crane travel gear, girder travel gear, head girder for bridge cranes, ceiling crane head girder, head girder for single-girder bridge crane, crane runway girder -Manufacturer: Demag, 1 set of end girders for single girder bridge crane Type: ELV -Carrying rollers: Ø 160 mm -Hole spacing: 290 mm Ø 20 mm / Dimensions see photos -Transport dimensions: 2355/365/H245 mm -Weight: 302 kg Hodpfx Aeyzw Iujgfoff

Condition: used, Demag PK 10 N electric chain hoist with electric trolley complete Hsdpfx Asrvkanogfoff

Condition: good (used), Year of construction: 1986, Mannesmann Demag single electric chain hoist load capacity 1000 kg + load capacity 2000 kg with trolley electric or manual trolley We have 10 cranes in stock. Hfsdpfx Aorgrp Sogfef

Year of construction: 1995, condition: used, Demag crane rail KBK II length 7000 mm with ceiling mounting + electric chain hoist 125 kg but there is also the possibility for 250 kg Hfodpsh Dwhrefx Agfsf

Condition: used, Year of construction: 2010, operating hours: 47,000 h, clamping force: 320 kN, displacement volume: 891 cm³, injection pressure: 2,420 bar, overall weight: 17,300 kg, screw conveyor diameter: 60 mm, terms of delivery: EXW (ex Works) Hsdsx E A Twepfx Agfsff delivery time: on request terms of payment: 100% prior to delivery

Condition: good (used), Year of construction: 2011, Column jib crane, overhead crane, workstation crane -Large base plate: 2000 x 1140 mm Hsdpfjxzt Nfox Agfjff -Load capacity: 1000 kg -with chain hoist: Demag type DCS-PRO 10-1000 1/1 H5 VS6-11 year of manufacture 2011 -Main stroke: 6 m/min -Drive system: Demag type E22, year of manufacture 2011 -Travel speed: 24.0/6.0 m/min -Projection: 3860 mm -Total height: 4470 mm -Height of lower edge of boom: 4060 mm -Hook height: 3510 mm -Swivel range: 270° -Transport dimensions: 4470/2000/H1450 mm -Empty weight: 1004 kg

Condition: used, Year of construction: 2007, operating hours: 67,000 h, clamping force: 250 kN, displacement volume: 530 cm³, injection pressure: 2,426 bar, overall weight: 14,200 kg, screw conveyor diameter: 50 mm, Freight base: FCA Pegnitz Delivery time: by arrangement Hodpowlkcasfx Agfjff Payment terms: 100% before takeover of the machine, net

Condition: used, Year of construction: 2007, operating hours: 67,000 h, clamping force: 250 kN, displacement volume: 530 cm³, injection pressure: 2,426 bar, overall weight: 14,200 kg, screw conveyor diameter: 50 mm, Payment terms: 100% net before taking delivery of the machine Hsdpswz R Iusfx Agfoff Delivery time: by arrangement Freight basis: ex-works

Condition: excellent (used), DEMAG Chain Hoist Type PK 2N-F Stock number (1221) Hsdeyy S Tiepfx Agfsff Lifting capacity 500 kg 2 lifting speeds: 5/1.25 m/min. 380 Volt 2.2 / 1.5 Ampere Lifting height 4.5 meters

Condition: excellent (used), Year of construction: 2006, clamping force: 500 kN, screw diameter: 22 mm, clearance between the columns: 355 mm, displacement volume: 41 cm³, injection pressure: 2,800 bar, injection weight: 37 g, mold height (min.): 210 mm, Clamping force: 50 t Year of manufacture: 2006 Injection unit .../200 Hfodpjyz Sd Dsfx Agfjf Screw diameter: 22 mm Specific injection pressure: 2800 bar Injection volume: 41.8 ccm Mould clamping system 50/... Clamping force: 50 t Mould plate dimensions: 520 x 520 mm Tie bar clearance: 355 x 355 mm Mould height: 210 mm Opening stroke: 400 mm Maximum platen distance: 610 mm Weight: 2700 kg Dimensions (m) L x W x H: 3.8 x 1.1 x 2.1 m Control: NC4

Condition: used, Electric chain hoist crane DEMAG type PK1N-F Serial No. 1498030 Load capacity: 125 kg Hook travel: 4 meters Distance from suspension to load hook: 410 mm Lifting speed: 8 m/min Fine lifting speed: 2 m/min Pendant cable length: approx. 1.1 meters Power supply: 380 Volt, 50 Hz Hedeyy Df Rjpfx Agfoff 1 chain fall = 125 kg - Emergency stop Weight: 20 kg Good condition

Condition: good (used), Year of construction: 2004, Demag ergotech sys 50-200 (1992) Hfjdpfxoyyztfj Agfef

Condition: good (used), Year of construction: 2006, Demag systec 160/520-430 (2010) Hfjdpfx Aoyyzpyegfef

Condition: good (used), Year of construction: 2003, Demag ergotech extra 800-430 (2003) Hfedpfx Agoyyzi Hofof

Condition: ready for operation (used), Year of construction: 2008, operating hours: 57,628 h, clamping force: 800 kN, screw diameter: 35 mm, injection weight: 149 g, This DEMAG SYSTEC 80/420-310 was manufactured in 2008. It features a clamping force of 800 kN and a screw diameter of 35 mm, making it suitable for processing various materials such as PA, PP, PE, and ABS. The machine includes a Wittmann linear robot and a Gravimax 14R gravimetric blender. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG SYSTEC 80/420-310 hydraulic injection moulding machine we have for sale. Contact us for further details. • Processed materials: PA, PP, PE, ABS • Cylinder temperature: up to 450°C • Tie bar distance: 420 mm • Injection unit: 310 Hsdpfxjyyyuuo Agfoff • Control system: CDIAS / NC5 • Total operating hours (SPS): 108,544.0 h • Drive operating hours: 57,628.7 h • Heating operating hours: 73,426.7 h • Total cycle counter: 5,058,031 • Voltage: 400 V • Frequency: 50 Hz • Current: 114 A • Max pressure (Pmax): 235 bar • Max flow (Qmax): 104 l/min • Installation height of the tool: 300 mm • Maximum distance between tool mounting plates: 750 mm • Availability: Mid 2026 Additional equipment • Wittmann linear robot (Handling/Robot) • Gravimax 14R gravimetric blender • TORO-systems material loader

Condition: used, Year of construction: 2005, Demag extra 50-200 Clamping force: 50 Hsdpfx Aeyypm Tegfeff Distance between tie bats: 355 x 350 mm Screw diameter: 22 mm Pneumatic vent: 1x Hydraulic vent: 1x

Condition: good (used), Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, control switch for crane remote control with cable -Type: DST 6 -Connector: 16-pin Hfodpjxzqp Asfx Agfof -Crane remote control: 2 steps below the switch each -Transport dimensions: 870/360/H140 mm -Weight: 6.1 kg

Condition: used, Crane remote control, crane control, crane control, pendant control, control switch, control cylinder Hfedpfx Aexzq Sqsgfsf -Handover: in its current condition as seen, see photos -Condition: Switching elements are missing, see photos -Manufacturer: Demag, control switch for crane remote control with cable -Type: DSE -Connector: 16-pin -Transport dimensions: 600/330/H140 mm -Weight: 3.5 kg

Condition: used, Low-priced from company liquidation Hedpfx Agoyyarmsfoff

Condition: excellent (used), Year of construction: 2015, clamping force: 1,000 kN, Clamping force: 100 t Opening max: 500 mm Mould heigh: 250 mm Platen size: 590x600mm Distance between tie bars V: 420 mm Distance between tie bars H: 420 mm Type: Horizontal Drive: Hydraulic Screw diameter: 30 mm Injection weight: 103 g Injection volume: 115 cm3 Injection pressure: 2755 extra equipment: 1. 2 hydraulic core pull circuits on moving platen (proportional valves) 2. Additional connections for 2 core pulls on fixed platen 3. Pneumatic core pull (2 circuits) on moving platen 4. 4-zone cooling water flow controller with temperature display 5. Compressed air blow valves on fixed and moving platens (programmable) 6. Integrated hot runner control, 8 zones 7. Interfaces for external nozzle heating bands Hedpfx Aex Tdp Negfeff 8. Interface for integrated temperature control units (up to 6 circuits) 9. Interface for mould temperature monitoring (2 circuits) 10. EUROMAP 67 for automation equipment

Condition: ready for operation (used), Bridge Crane 5t, Demag Bridge Crane 5t, Crane 5t, Used Machine Manufacturer: Demag Overall dimensions: 10,700 x 3,000 mm Electrical data: 400 V; 50 Hz, total current = 18 Amps Hoisting unit: Demag P35 Load capacity: 5,000 kg / 5t Rope length / lifting height: 8 m Hfodpfx Agswd Hhcefof - Wired remote control - Crane travel motor refurbished - Trolley motor refurbished

Condition: used, arm length 6000 mm weight max. in kg 250 kg swivelling range . Grad height 3800 mm Crane number 1.26 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Hfodpfxjyqvcus Agfef Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), functionality: fully functional, 2 units DEMAG trolley 3.2 t, complete Hodpfjwafidjx Agfjff with hoisting unit PLV168 Very good condition, ready for immediate use 1 unit for €3,600.00 net 2 units for €6,900.00 net DEMAG slip ring motor 36/24 S4 GÜ Fine gear FG36 19K or Fine gear 72 DFg refurbished or Hoist motor 36/24 K6P 24/14 K4P 24/10 K4P Info: 20,000 DEMAG spare parts and components in stock! demag parts warehouse

Condition: good (used), Year of construction: 2010, machine/vehicle number: ENOG, DEMAG KBK Overhead Crane System, approx. 8x4 m Payload / Lifting Capacity: 250 kg (0.25 t) Technical data of the system: Crane runway made from Demag KBK1 + 2 rails System is supplied complete: KBK rails, rail connectors, trolleys, end plates, cable carrier, brackets/hangers, etc. Including Demag DC-COM 250 KG chain hoist Crane is dismantled and immediately available Used condition, see pictures Item location: 75053 Gondelsheim Shipping by freight forwarder or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems available as well. Payloads from 125 KG to 1600 KG Please inquire for crane runway with your desired cantilever load and dimensions. Hfedpfxsmqf Nfo Agfsf