Used Delivery Belt for sale (28,077)

Condition: good (used), Year of construction: 1998, Working width 1100 mm, brush unit, vacuum carpet, 4524 hours, lacquer package (electric segmented pad sander), Itodpfx Ahjyaym Aj Neb workpiece thickness 3-160 mm, working height 900 mm, sanding belt length 2000 mm, feed speed 3-15 m/min, drive motor 15 kW, connected load 20.75 kW, 6 bar, air consumption 4 liters/min, dimensions 1460 x 1800 x 2020 mm, weight approx. 2000 kg in good condition Price ex location Transport possible at extra cost!

Condition: excellent (used), CATALOG NUMBER 7857 Technical data: - Maximum workpiece width: 1100 mm - Maximum workpiece height: 160 mm 2 sanding units: – From above: - Rubber pressure roller, smooth 1) Calibrating grooved rubber roller - Rubber pressure roller 2) Grooved rubber roller + pad + metal roller - Rubber pressure roller - Total unit power: 15 kW – From below: - 3 driven rubber feed rollers - Feed belt - 3 driven rubber feed rollers - Sanding thickness potentiometer - Pneumatic belt oscillation - Table elevation: electric + manual (for precise adjustment) - 2 feed speeds - With pneumatic brake - Working pressure: 6-8 bar - Extraction port diameter: 2 x 140 mm - Overall dimensions (L/W/H): 1650 x 1960 x 2100 mm - Weight: 1250 kg ADVANTAGES – Not repainted – Czech production – 2 sanding units – Original operator’s manual (DTR) – Used sander, in very good condition Isdpfx Ahex Ifgre Njtb Net price: 36,900 PLN Net price: 8,790 EUR Net price calculated at exchange rate: 4.2 PLN/EUR (Price may change if the exchange rate fluctuates significantly)

Condition: excellent (used), CATALOG NUMBER 7818 Itedjx Dbh Ijpfx Ah Nsb Technical data: - Max. working width: 1100mm - Max. working height: 180mm 2 units: 1) Grooved rubber roller for calibration 2) Grooved rubber roller for calibration – Top side: - Metal pressure roller - Unit - Metal pressure roller - Unit - Metal pressure roller – Bottom side: - 2 rubber sliding rollers - Feed belt - 2 rubber sliding rollers - Pneumatic belt oscillation - Electric table lifting - Sanding thickness potentiometer - 2 feed speeds - Feed motor: 0.80 kW - Main motor: 10kW - Operating pressure: 6–8 bar - Extraction port diameter: 2x155mm - Overall dimensions (LxWxH): 1670x1740x2040mm - Weight: 1200kg ADVANTAGES – Made in Italy – Sanding thickness potentiometer – 2 sanding units – Used sander, very good condition Net price: 25,900 PLN Net price: 6,160 EUR based on an exchange rate of 4.2 PLN/EUR (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number: 7549 TECHNICAL DATA Max width of workpiece: 1100mm Max height of workpiece: 170mm 2 units: 1) Grooved rubber roller for calibration 2) Rubber roller + pad + metal roller – from above: Metal roller, sliding Working unit Metal roller, sliding Unit with pad Output metal roller, sliding – from below: Feed belt Pneumatic belt oscillation Electric table lifting 2 feed speeds Motor: 11kW With pneumatic brake Working pressure: 6-8 bar Extractor outlet diameter: 2x150mm Overall dimensions (L/W/H): 1960x1700x2000mm Weight approx.: 2000kg – German manufacture – 2 units – not repainted – Used sander, very good condition Net price: 34,900 PLN Isdpjyaq Rfsfx Ah Njtb Net price: 8,300 EUR at 4.2 EUR rate (Prices may change with significant fluctuations)

Condition: used, Used stainless steel pilot plant belt dryer by Neuweiler AG (CH). Dryer has a belt designed in stainless steel net, with total width 300 mm, working width 250 mm. Total length of belt about 830 cm. At the feeding section there is a rotating turbine with adjustable rotation and height, for proper positioning the product on the belt. Turbine is driven by el motor 0.18 kW. Drying chamber has insulated walls and has working length 207 cm. Belt is driven by reducer and el motor 0,55 kW, 1380 rpm, 230/400 V, 50 Hz. Working speed of belt is adjustable. Dryer is equipped with stainless steel main air blower driven by el. motor 11 kW. Air is transfered via chamber with electric heaters and is blowing on the belt from the top. There is also exhaust fan. Dryer has electric cabinet and local control panel. All is mounted on stainless steel frame with 6 legs. Ijdpfx Aheyanzze Nstb

Condition: used, Year of construction: 2008, Boere Select 1300 KC Widebeltsander (contactrol + combi) Description Isdpow Emwmofx Ah Nstb Number of sanding units: 2 Type of units: 1 contact and 1 combi aggregate Sanding width: 1300 mm Number of engines: 2 Throughput: 4-15 mtr./min Vacuum table: No Motor power: 15 kW Extraction diameter: 250 mm (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen vorbehalten! Keine Garantie auf gedruckte Daten!. Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, width of the strips / mm band length / mm band speed / m/min Itodewgi Taspfx Ah Neb

Condition: used, Used machine Condition: age-appropriate Table size: 2,600 x 900 mm Maximum usable grinding length: 2,500 mm Belt size: 7,100 mm x 150 mm 1,100 mm throat on the right Motor: 5.2 kW Itsdpsxwz N Ssfx Ah Njb Shipping dimensions: 4,300 x 1,650 x 1,800 mm Weight: 620 kg Availability: approx. mid/end of January 2026 Stock location: Frankfurt

Condition: used, Used machine Year of manufacture: 1981 Features and technical data: Motor 5.2/7.5 kW, pole-changeable 750/1500 rpm Belt speeds: 11 and 22 m/sec With attached blower motor 2.2 kW (2840 rpm, air volume 2400 m³/h) Table size: 2900 x 1400 mm Usable working length: 2700 mm Table stroke: 320 mm Belt dimension: 7800 x 150 mm Including pneumatic pressure shoe with belt tension brake Extraction nozzle: 180 mm Air requirement: 2 l/min at 6 bar Weight: 1300 kg Availability: short-term Iedex H U Nmepfx Ah Njtb Location: Flörsheim

Condition: excellent (used), Catalogue number 7871 TECHNICAL DATA - Maximum workpiece width: 1300mm - Maximum workpiece height: 170mm 2 sanding units: 1) Grooved rubber roller for calibration 2) Grooved rubber roller + segmented shoe + metal roller – From above: 2 pressure feed rubber rollers First unit: - Pressure rubber roller Second unit: - Pressure rubber roller - Cleaning brush - Pressure rubber roller – From below: - 3 slip rubber rollers - Conveyor belt - 3 slip rubber rollers - Pneumatic belt oscillation with photoelectric sensors - Electric table elevation - Pneumatic brake - Stepless feed speed adjustment via gear motor - Vacuum pump - Main motor: 15kW - Feed motor: 1.5kW - Pump motor: 4.6kW - Working pressure: 6-8bar - Extraction port diameters: 2x150mm, 2x80mm, 4x70mm, 120mm - Overall dimensions (L/W/H): 1700x2250x2400mm + pallet - Transport dimensions (L/W/H): 1700x2250x2140mm + pallet - Weight: approx. 2000kg ADVANTAGES – Made in Italy – 2 sanding units Ijdpox U Urqsfx Ah Netb – Segmented shoe – Vacuum pump – Not repainted – Used sander, in very good condition Net price: 39,900 PLN Net price: 9,500 EUR (depending on the exchange rate of 4.2 EUR) (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number 7861 TECHNICAL DATA - Workpiece length: 2500 mm - Workpiece width: 800 mm - Main motor approx. 4 kW - Grinding belt width: 170 mm Itjdjx U Tnqopfx Ah Nsb - 2 speed settings - Extraction port diameter: 2x120 mm - Overall dimensions (L/W/H): 3640x1220x1500 mm - Weight approx. 800 kg ADVANTAGES – Manufactured in Poland – DTR documentation included – Used sander, in very good condition Net price: 6900 PLN Net price: 1640 EUR at an exchange rate of 4.2 PLN/EUR (Prices may vary with significant exchange rate fluctuations)

Condition: used, Year of construction: 1998, Belt sanding unit for machining workpiece side surfaces with pneumatic belt tensioner. Technical data: Belt sanding unit: - Tilting device from -1° to +15° Itjdpfxexqqcze Ah Nsb - Belt size 2500 x 100 mm - Cutting speed 18/36 m/s - Motor 3.7/4.4 kW - Two-roller device for free-belt sanding. Roller diameter 75 mm, adjustable center distance from 225 - 320 mm - Swiveling horizontal slide, stroke 130 / 220 mm, operated via handwheel - Fixed mounting for sanding unit - Feed device, pneumatically controlled, stroke 5 - 20 mm Table unit: - Linear workpiece carrier table with automatic feed, travel 700 mm, clamping surface 300 x 250 mm, working speed from 15 - 150 mm/s, working travel freely programmable by the automation - Cable carrier track for cable management and pneumatic hoses - Clamping of workpieces by spring, release by pneumatic cylinder

Condition: used, Vertical Press Delivery Heidelberg VSA-66/M.D Vertikale Pressauslage / Vertical Press Delivery Heidelberg VSA-66/M.D Year 2000 - Serial-No. 702101/00-292080 Arbeitsbreite max. 660mm / Working width max. 660mm Ijdpfx Ahex U Ezpj Netb Markiereinrichtung / Marking Device Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 1992, 920229 grinding band dimension 75 mm x 2000 mm wheel dimensions 250 mm weight 90 kg volt 380 V Iedsrxg Tqspfx Ah Nstb

Year of construction: 1999, condition: used, length 12,5 mm Iodpepxrkgofx Ah Njtb width 600 mm height over floor . mm Engine overhauled, 5 new rollers

Condition: used, SCM Sandya 600 RCS 110 Wide-Belt Calibrating and Fine Sanding Machine The advanced sanding center for calibration, solid wood sanding, and fine veneer sanding TOP Equipment 1. Calibrating sanding unit with RA angled-grooved steel contact roller 2. Combination sanding unit with contact roller, 140 mm diameter, 85 Shore hardness, elastic MESAR sectional sanding pad with sector-wise electronic control Itedpfxex Uyfco Ah Nsb Working width 1100 mm Main motor power 15 kW Version "B" for RCS MESAR elastic sectional sanding pad electronic programming unit "LOGIC SC screen control" electrically adjustable working height with automatic workpiece detection Roller table in infeed and outfeed for long workpieces Machine from a small workshop / LEASE REPOSSESSION First delivery 2017 available from stock Lieboch

Year of construction: 2003, condition: used, machine/vehicle number: 14384, - Manufacturer: Aagaard/Finnrose - Type: FB 3.5 - Length: 3,500 mm - Year of manufacture 2003 - Working width: 1,350 mm - Total width: 1,460 mm Itjdpfxsx Urmfs Ah Nob - Working height 900 + - 20 mm - Height adjustable - Location, in stock - Volts, Hz 400 / 50 - Motor power 0.55 kW - Location: in stock

Year of construction: 2002, condition: used, machine/vehicle number: 5713, - Manufacturer: Elmag Superfici - Type: TT1-30 - With cross carriage wheels - Length: 3,000 mm - Working width: 1,350 mm - Total width: 1,660 mm - Working height: 900 + - 20 mm - Height adjustable - Location, in stock - Volts, Hz 400 / 50 Iedpfxsx Url Us Ah Notb - Motor power 0.75 kW

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, Top sanding and calibrating machine (fine finishing). Also suitable for sanding assembled window frames (semi-open side). Machine with fixed table and height-adjustable sanding unit. Itjdoya H E Eopfx Ah Nsb • One sanding unit type C (combination unit with roller and mechanically adjustable pad) • Rubber roller diameter 160 mm, 90 Sh • Sanding belt length 1900 mm • 1 straight and 1 beveled pad • Fixed table height, motorized height adjustment of sanding unit (max. sanding thickness 200 mm) • Automatic star-delta starter • Ammeter for sanding unit motor • Infrared sanding belt oscillation • Electronic digital thickness setting display • 2 feed speeds: 4.5 / 9 m/min • Rubber pressure rollers • Pneumatic brake on main motor • Pneumatic tensioning of sanding belt • Soundproof protection

Condition: good (used), Year of construction: 2021, functionality: fully functional, conveyor belt width: 1,090 mm, conveyor belt speed: 190 mm/s, total length: 3,500 mm, total width: 1,580 mm, total height: 290 mm, overall weight: 240 kg, discharge height: 290 mm, inner radius: 1,070 mm, outer radius: 2,400 mm, power: 0.37 kW (0.50 HP), Equipment: type plate available, Manufacturer: Transnorm Year of manufacture: 2021 Overall dimensions (LxWxH): 3,500 x 1,580 x 290 Width incl. side panel in mm: 1,300 Width incl. drive in mm: 1,500 Side panel height in mm: 210 Conveyor width in mm: 1,090 Curve (degrees): 90 Curve radius, inside in mm: 1,070 Curve radius, outside in mm: 2,400 Belt type: Grip belt, PVC Belt width in mm: 1,090 Substructure: without (optionally available) Sliding surface: wood Running direction: right Drive: head drive Motor type: gear motor Isdpfx Aheya H Duo Nstb Motor data: SEW 0.37 kW, 220 - 240 or 380 - 415 V Motor position: left in conveyor direction Conveyor speed in m/s: 0.19 m/s Net weight in kg: 240 Special features: Adjustable side guide Condition: Used / fully functional Function test: OK

Year of construction: 2016, condition: used, functionality: fully functional, - Sensor for dosing hopper monitoring installed - Optional with high-pressure cleaner - Drive roller has been replaced Pomace discharge height: 540 mm Wastewater outlet height: 170 mm Juice outlet height: 300 mm Connection for juice outlet: 1 ½" Connection for wastewater: ø 76.1 mm Water consumption for cleaning: 3 l/min Contact time: 2.8 - 1 min Belt speed: 1.4 - 3.6 m/min Juice yield: up to 75% Material: 1.4301 / AISI 304 Weight: 585 kg Application height: 0 - 50 mm (9 levels) Application width: 300 mm Itsdpfxsya Eb Se Ah Nob Belt length: 6,600 mm Belt width: 500 mm Infeed height: 1,300 mm Height: 1,300 mm Width: 1,130 mm Length: 1,860 mm Electrical fuse: 16 A Electrical connection: 400V 50Hz (three-phase) Motor power: Drive motor 0.75 (1.02) kW, Cleaning motor 0.12 (0.16) kW (PS) Rated output: up to 700 kg/h Processable materials: Apples, pears, quinces, red beets, carrots, cassava, vegetables. This list comprises only examples of materials that have been tested and processed in practice.

Year of construction: 2026, condition: new, The PT-400 belt press is a device used for extracting apple juice. This process takes place between the machine’s belt and appropriately arranged press rollers. The extracted juice is pumped into the pasteurizer tank. Iedpfx Ajfgl Hfoh Nstb Technical data: Capacity: up to 500 kg of apples per hour Juice yield from pressed apples: up to 75% Installed power: 0.8 kW, 230 V Dimensions L × W × H (mm): 1940 × 1000 × 1250 Weight: 500 kg Belt width: 400 mm Belt speed: adjustable Juice collection tray with sieve, mesh size Ø 1 mm Juice pump

Year of construction: 2026, condition: new, The PT-1000 belt press is a device used for extracting apple juice. This process takes place between the machine’s belt and appropriately arranged press rollers. The extracted juice is pumped into the pasteurizer tank. Iedpfx Ahsfglxxe Nstb Technical data: Capacity: up to 900 kg of apples per hour Juice yield from pressed apples: up to 75% Installed power: 1.5 kW, 230 V Dimensions L × W × H (mm): 2230 × 1190 × 1250 Weight: 700 kg Belt width: 500 mm Belt speed: adjustable Juice collection tray with sieve, mesh size Ø 1 mm Juice pump

Year of construction: 2026, condition: new, The PT-1200 belt press is a device used for extracting apple juice. This process takes place between the machine’s belt and appropriately arranged press rollers. The extracted juice is pumped into the pasteurizer tank. Technical data: Capacity: up to 3700 kg of apples per hour Juice yield from pressed apples: up to 75% Installed power: 2.5 kW, 230 V Iodpfxoukq T Hj Ah Netb Dimensions L × W × H (mm): 3100 × 1650 × 2190 Weight: 2000 kg Belt width: 1200 mm Belt speed: adjustable Juice collection tray with sieve Juice pump

Condition: excellent (used), functionality: fully functional, mileage: 823,665 km, first registration: 12/2013, fuel type: diesel, empty load weight: 9,310 kg, maximum load weight: 8,690 kg, tire size: 315/80R22.5, tire condition: 50 %, axle configuration: 4x2, wheelbase: 5,495 mm, fuel: diesel, brakes: engine braking, color: brown, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, total length: 9,815 mm, total width: 2,550 mm, total height: 2,900 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 13,000 kg, loading space length: 7,600 mm, loading space width: 2,500 mm, loading space height: 2,650 mm, Year of construction: 2013, Equipment: ABS, AdBlue, Bluetooth, USB port, air conditioning, car registration, cruise control, onboard computer, power mirror, spoiler, tail-lift, Dhollandia rear tail lift with 2,000 kg lifting capacity Air conditioning Good overall condition Itodpfxoyazydo Ah Nob More information on the Almerisan website.