Used Degreasing for sale (85)

Condition: new, Year of construction: 2025, color: grey, overall weight: 12,500 kg, maximum load weight: 11,820 kg, empty load weight: 680 kg, loading space volume: 7 m³, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel structure Kjdpfx Ahex Ni N Hs Noll Structure: Tipper container approx. 7m³ asymmetrical/open Tipper container 7 cbm open asymmetrical - old DIN Material quality: SJ235 (ST37-2) Floor plate / wall plates: 6 / 4 mm Tipper bearing: triple tipping bearing on one side - with warning markings - UVV sticker - container tested and approved according to UVV - Net or tarpaulin hooks all around - 4x mounting bolts - Mounting bolts and tipping bearing ST 52 - Corners reinforced inside and outside Container fully welded, degreased, blasted, primed inside and outside with alkyd base paint 40 µm and painted outside with alkyd resin paint 40 µm in RAL7016 anthracite gray ACCESSORIES INFORMATION WITHOUT GUARANTEE, changes, prior sale and Errors excepted! - .

Condition: new, Year of construction: 2025, color: grey, empty load weight: 860 kg, loading space volume: 10 m³, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel structure Structure: Tipper container approx. 10m³ asymmetrical/open Tipper container 10 cbm open asymmetrical - old DIN Material quality: SJ235 (ST37-2) Floor plate / wall plates: 6 / 4 mm Tipper bearing: triple tipping bearing on one side - with warning markings - UVV sticker - container tested and approved according to UVV - Net or tarpaulin hooks all around - 4x mounting bolts Kodpfox Ni Rdsx Ah Nell - Mounting bolts and tipping bearing ST 52 - Corners reinforced inside and outside Container fully welded, degreased, blasted, primed inside and outside with alkyd base paint 40 µm and painted outside with alkyd resin paint 40 µm in RAL7016 anthracite gray ACCESSORIES INFORMATION WITHOUT GUARANTEE, changes, prior sale and errors excepted! - .

Condition: new, Year of construction: 2025, color: grey, overall weight: 18,000 kg, maximum load weight: 16,680 kg, empty load weight: 1,320 kg, loading space volume: 5 m³, loading space width: 2,300 mm, loading space length: 4,500 mm, loading space height: 500 mm, first registration: 12/2025, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel body, doors Body: Roll-off container with double-wing door, approx. 5 m³, ARCHIVE PHOTOS Roll-off container approx. 5 cbm open - DIN 30722-1 Capacity: approx. 5 cbm Internal dimensions (LxWxH): 4500x2300x500 mm Material quality: S235 Floor/wall sheets: 5/3 mm Frame spacing: 750 mm Kodpfx Asx H Tv Seh Noll Floor/side/frame connection: 45/45° Rear version: Double-wing door with S-hook lock Type: ABS-50/4.5/75 Exposed hook Incl. Warning markings, UVV sticker (DGUV), checklist (safety instructions) All containers are welded, degreased, blasted, primed inside and outside with alkyd primer 60 µm, and painted outside with alkyd resin paint 40 µm in RAL color shade 7016 ACCESSORY DETAILS WITHOUT WARRANTY, subject to changes, prior sale and errors!

Condition: new, Year of construction: 2025, color: grey, overall weight: 18,000 kg, maximum load weight: 16,680 kg, empty load weight: 1,320 kg, loading space volume: 5 m³, loading space width: 2,300 mm, loading space length: 4,500 mm, loading space height: 500 mm, first registration: 12/2025, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel body, doors Body: Roll-off container with double-wing door, approx. 5 m³, ARCHIVE PHOTOS Roll-off container approx. 5 cbm open - DIN 30722-1 Capacity: approx. 5 cbm Internal dimensions (LxWxH): 4500x2300x500 mm Material quality: S235 Floor/wall sheets: 5/3 mm Frame spacing: 750 mm Floor/side/frame connection: 45/45° Rear version: Double-wing door with S-hook lock Type: ABS-50/4.5/75 Kedpfxsx H Tv Eo Ah Nell Exposed hook Incl. Warning markings, UVV sticker (DGUV), checklist (safety instructions) All containers are welded, degreased, blasted, primed inside and outside with alkyd primer 60 µm, and painted outside with alkyd resin paint 40 µm in RAL color shade 7016 ACCESSORY DETAILS WITHOUT WARRANTY, subject to changes, prior sale and errors!

Condition: new, ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 4-6 weeks after receipt of payment! ✅✅✅Energy Class A+++✅✅✅ ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✳️ Maintain your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ Innovative wet blasting technology for perfect surfaces – Efficient. Environmentally friendly. Safe. The future of surface finishing begins here: With wet blasting solutions from Proton Maschinenbau GmbH, you can rely on uncompromising quality, maximum occupational safety, and state-of-the-art technology. Whether manual or fully automated, our systems guarantee precise cleaning, effective deburring, and optimal preparation for coatings, painting, or further processing. Our wet blasting systems combine water, compressed air, and a suitable blasting media to create a highly effective cleaning process that offers clear advantages over conventional dry blasting: ✔ 100% dust-free operation thanks to the integrated jet pulse filter system ✔ Homogeneous, contamination-free surfaces – no chemical additives ✔ Gentle processing of sensitive materials without embedding blasting media ✔ Optimal results for degreasing, paint stripping, structuring, and cleaning ✔ Energy- and resource-efficient process, suitable for numerous blasting media ✔ Ideal for demanding industries such as aviation, medical technology, the automotive industry, or toolmaking Our portfolio includes, among others: 🔹 ST1 & ST5 – Compact manual wet blasting cabinets with precise foot pedal control 🔹 ST6 – Specialized machine for rim processing up to 26 inches 🔹 ST12 – Fully automatic drum system with recipe management and intelligent control 🔹 ST17 – Ergonomic system with rotating platform, wash basin, and transport trolley All machines feature: 🔧 Stainless steel housing with laser seam 🖥️ Intuitive PLC touch panel with programming and maintenance instructions 💡 LED interior lighting, safety features, and automated media return Areas of application: Cleaning aluminum or plastic molds, deburring precision parts, preparing implants or prototypes from additive manufacturing – we offer the right solution for every application. Proton stands for: 2-year warranty on manufacturing quality, 10-year spare parts availability, personalized consulting, and robust systems "Made in Germany." Kledjwdpq Hspfx Ah Nel 👉 Discover the advantages of wet blasting technology now – and reach a new level of surface finishing.

Condition: new, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Great Support! ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 4-6 weeks after receipt of payment! Important note: If you would like to receive a quote for an automatic powder coating system, please use the powder coating system configurator on the homepage of our website. ✅✅✅Energy Class A+++✅✅✅ ➖➖➖➖➖ ✳️Maintain your liquidity! We offer a variety of financing models to ensure your investment has the greatest chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ➖➖➖➖➖ ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ ► Optimal adhesion begins with perfect preparation – Chemical pretreatment systems from PROTON◄ Before the paint can develop its full potential, the surface must be flawless. PROTON surface pretreatment systems ensure that every contaminant – be it oil, dirt, or oxide – is reliably removed. This is the only way to achieve lasting corrosion resistance and excellent paint adhesion. Each product requires a customized process. Whether alkaline or acid degreasing, iron or zinc phosphating, nanotechnology, or chrome-free processes – we develop customized solutions for your requirements. Our pretreatment systems – whether spray or immersion systems – offer you: ✳️ Maximum energy efficiency ✳️ Minimized chemical and water consumption ✳️ Precise process control with automatic dosing and pH monitoring ✳️ Durable construction made of chemical-resistant stainless steel or plastic Our promise: Customized technology for the highest demands Our experienced project team analyzes your production conditions in detail and recommends the optimally matched pretreatment system. We consider all crucial parameters – from heating power and water circulation to vapor deposition and chemical separation. The spray wash lines are seamlessly integrated into your conveyor system. All cleaning, rinsing, and drying processes are fully automated and efficient – ready for a perfect coating. Available systems: ✳️ Spray and dip pretreatment lines Kedpfx Ahskwct Ue Noll ✳️ Nanotechnology systems (e.g., Bonderite, Oxsilan) ✳️ Degreasing and pickling systems ✳️ Iron and zinc phosphating lines ✳️ Chromating and chrome-free systems PROTON – Technology that convinces. Experience that works. ⭐Follow us for new campaigns⭐ ☀️ 2-YEAR WARRANTY ☀️ ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Condition: new, Year of construction: 2025, functionality: fully functional, workpiece weight (max.): 700 kg, workpiece height (max.): 2,300 mm, workpiece length (max.): 6,000 mm, insulation material: Mineralwolle, insulation thickness: 150 mm, workpiece width (max.): 2,000 mm, Complete Plant with Chemical Pretreatment (7 Stages) for GSB Certification (QUALICOAT) (Suitable for Multimetal) All dimensions and further modifications can be taken into account during design and planning. The offer includes the following components: - Pretreatment cabin incl. reverse osmosis unit - Walk-in coating booth - Powder spray gun - Powder curing oven - Dryer Kodpjffv Tpjfx Ah Njll - Manual conveyor system - Lifting-lowering station - Electrical control system Details: 1. Walk-in cleaning cabin, pretreatment for steel and aluminum The cleaning cabin is designed for automatic cleaning. Medium pressure spraying can be applied. The cabin contains 7 different spray tanks. Maximum part size: L = 6000 mm, W = 2000 mm, H = 2300 mm. 1. Cabin dimensions - Length: 6,500 mm - Width: 3,000 mm - Height: 3,600 mm 2. Total pretreatment dimensions - Length: 6,600 mm - Width: 4,640 mm - Height: 4,300 mm Process Stages: 1st Stage: Degreasing/Neutral Pickle - Heated tank, 50-55°C, time = 3-6 minutes, drip-off time = 80 seconds 2nd Stage: Acidic Mineral Pickle - Heated tank, 50-55°C, time = 3-6 minutes, drip-off time = 80 seconds 3rd Stage: Rinse 1 - Rinsing with ambient temperature, time = 0.75-1.5 minutes, drip-off time = 1 minute 4th Stage: Rinse 2 - Rinsing with ambient temperature, time = 0.75-1.5 minutes, drip-off time = 45 seconds 5th Stage: Rinse 3 - Rinsing with ambient temperature, time = 0.75-1.5 minutes, drip-off time = 45 seconds 6th Stage: Nano-Ceramic - Processed at ambient temperature, time = 0.75-1.5 minutes, drip-off time = 60 seconds 7th Stage: Overhead spray ring for post-rinsing after Stage 6 - Rinsing with ambient temperature, time = 1 minute, drip-off time = 60 seconds 8th Stage: Passivation, no-rinse for aluminum - Rinsing with ambient temperature, time = 2-3 minutes, drip-off time = 1-2 minutes 1.1. Reverse Osmosis Unit - Reverse osmosis system, 250 liters/hour 1.2. Oil Skimmer - Tank no. 1 is equipped with an oil skimmer "UniSkim-21-100". Construction: The spraying system is two-part and movable, and can be shifted up to 500 mm via a pneumatic sliding system. Return to the tanks is also mobile via a pneumatic sliding system with 7 positions in order to serve the 7 tanks. 2. Walk-in coating booth 1. Booth dimensions - Length: 7,400 mm - Width: 4,000 mm - Height: 3,236 mm 2. Booth dimensions incl. extraction system - Length: 8,552 mm - Width: 6,232 mm - Height: 4,393 mm The booth features 2 single-side pneumatic doors for entry/exit of workpieces, and an additional side door for the coater. 3. Powder Coating Equipment Wagner, Manual System "Sprint 2 B" 4. Powder Curing Oven - Internal dimensions: - Length: 6,500 mm - Width: 2,200 mm - Height: 3,416 mm 5. Dryer - Internal dimensions: - Length: 6,500 mm - Width: 1,200 mm - Height: 3,416 mm 6. Manual Conveyor System The conveyor system consists of: The conveyor system is designed for a crossbar weight of 700 kg. The carriage can carry a maximum of 2,000 kg on 3 rails.

Condition: new, Year of construction: 2025, color: grey, overall weight: 18,000 kg, maximum load weight: 16,680 kg, empty load weight: 1,320 kg, loading space volume: 5 m³, loading space width: 2,300 mm, loading space length: 4,500 mm, loading space height: 500 mm, first registration: 12/2025, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel body, doors Body: Roll-off container with double-wing door, approx. 5m³, ARCHIVE IMAGES - Roll-off container approx. 5 cbm open - DIN 30722-1 Capacity: approx. 5 cbm Internal dimensions LxWxH: 4500x2300x500 mm Material quality: S235 Floor / wall thickness: 5/3 mm Frame spacing: 750 mm Floor/side/frame connection: 45/45° Rear variant: Double-wing door with S-hook lock Type: ABS-50/4.5/75 Free-standing hook Incl. warning markings, UVV badge (DGUV), checklist (safety instructions) All containers are welded, degreased, shot-blasted, primed inside and out with 60 μm alkyd primer, and outside painted with 40 μm alkyd resin paint in RAL 7016. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted! Kedpex E Tg Ujfx Ah Nsll

Condition: new, Year of construction: 2025, color: grey, overall weight: 18,000 kg, maximum load weight: 16,680 kg, empty load weight: 1,320 kg, loading space volume: 5 m³, loading space width: 2,300 mm, loading space length: 4,500 mm, loading space height: 500 mm, first registration: 12/2025, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel body, doors Body: Roll-off container with double-wing door, approx. 5 m³, ARCHIVE PHOTOS Roll-off container approx. 5 cbm open - DIN 30722-1 Capacity: approx. 5 cbm Kedpfx Ahex E Thfj Nsll Internal dimensions (LxWxH): 4500x2300x500 mm Material quality: S235 Floor/wall sheets: 5/3 mm Frame spacing: 750 mm Floor/side/frame connection: 45/45° Rear version: Double-wing door with S-hook lock Type: ABS-50/4.5/75 Exposed hook Incl. Warning markings, UVV sticker (DGUV), checklist (safety instructions) All containers are welded, degreased, blasted, primed inside and outside with alkyd primer 60 µm, and painted outside with alkyd resin paint 40 µm in RAL color shade 7016 ACCESSORY DETAILS WITHOUT WARRANTY, subject to changes, prior sale and errors!

Condition: good (used), Year of construction: 2019, functionality: fully functional, total length: 1,650 mm, total width: 1,770 mm, total height: 1,580 mm, input voltage: 400 V, type of input current: three-phase, pressure: 5 bar, temperature: 75 °C, power: 15.4 kW (20.94 HP), maximum load weight: 350 kg, workpiece weight (max.): 350 kg, cage diameter: 1,100 mm, TRL 1100 - 2021 - € 8,500 Kodpfxowfdpmj Ah Nsll Industrial washing machine for cleaning and degreasing workpieces using an alkaline cleaning agent. The machine is constructed entirely from stainless steel AISI 1.4301. Equipped with double walls with insulation in between. Rotating basket for parts, with spray nozzles for detergent above and below. Built-in filter for coarse contaminants. Fitted with a detergent pump and a drain pump to remove the used cleaning liquid. Level switches in the tank to detect fluid level. Monitoring of possible leaks. Control cabinet with digital temperature display. Cabinet fitted with a signal lamp for status indication. The machine is in very good condition and is ready for immediate use.

Condition: new, Year of construction: 2025, color: red, overall weight: 14,745 kg, maximum load weight: 12,500 kg, empty load weight: 2,245 kg, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel superstructure, rear discharge Superstructure: Water tank roll-off container approx. 12,000 liters. ARCHIVE PHOTOS Water tank without platform approx. 12,000 liters – according to DIN 30722-1 Kodpfxjx Avkbj Ah Nsll - Clear internal dimensions (LxWxH): 5500 x 2394 x 1003 mm - Material grade: S235 (St-37) - Floor / wall plates: Smooth floor plate thickness 5 mm, sides 3 mm, roof and rear wall 4 mm - At the rear bottom: 2x Storz A-connection with ball valve (4 inch) - At the rear top: 1x Storz B-connection with elbow and cap (2 inch) - At the front top hook: 1x Storz B-connection with elbow, coupling, and cap (2 inch) - Galvanized and bolted step ladder on the front wall; vent pipe - Frame made of INP180 - On the roof: one manhole, diameter 600 mm - Inside: 3 baffle walls, diameter 600 mm (large cavities) - Watertight (tested for leak tightness) - Greasable steel rollers Tanks welded, degreased, blasted, internally primed with epoxy Temabond ST 200 300 μm, externally primed with epoxy resin paint 60 μm and coated with 2K paint (polyurethane paint B7) 40 μm in RAL shade 3000 red Comes with UVV sticker (DGUV), checklist (safety instructions), and warning marking – watertight (tested for leak tightness) ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted.

Condition: new, Year of construction: 2025, color: red, gearing type: other, driver cabin: other, Vehicle location: inbound / in transit, steel body, rear discharge Structure: water tank roll-off container approx. 12,700 L. Roll-off container/water tank from approx. 6,000L to 13,000L The tank shown has a volume of approx. 12,700L - Internal clear dimensions LxWxH: 5,400 x 2,400 x 1,200 mm (tank 4,600mm, platform 800mm) Klsdpfx Ahelu Hruj Nel - Material quality: S235 (St-37) - Floor sheet/wall sheets: smooth floor sheet thickness 5 mm, sides 3 mm - Forklift pockets at base of the container - Rollers greasable - Top ventilation with cover/access hatch - Upper C-coupling with flap - Rear A-coupling with ball valve - Epoxy coating inside, 50 micron - Outside primed 40 micron and painted - Two internal baffle plates - Ladder on front wall right side - Additional C-coupling with ball valve, front, lower left on front wall Container is fully welded, degreased, blasted, primed inside with 50 µm epoxy coating, outside primed with 40 µm alkyd primer and painted with 40 µm alkyd resin in RAL color of your choice Delivery time: approx. 8–10 weeks Available from 6,000–13,000 liters, price depending on capacity between EUR 8,000.00 and approx. EUR 13,000.00 depending on volume Available with self-priming water pump, self-lubricating with separate drive motor, delivery rate: 129 m³/h (2,000 l/min), head: 17 m, particle size: 28 mm, fuel type: diesel, tank 4.3 liters, see 2907 at approx. EUR 4,000 extra charge! Available as roll-off container and tank. ACCESSORY INFORMATION WITHOUT WARRANTY. Subject to changes, prior sale, and errors!

Condition: new, Receiver capacity 2 x 37 l Klodpjfv Au Aefx Ah Nel working pressure 4 - 8 bar Air consumption 170 - 500 l/min. weight of the machine ca. 36 Kg 1020 x 460 x 520 mm Mobile beam unit (soda blasting) Consisting of: Nozzle set and moisture separator Boiler 2 x 37 liters Blasting gun with 2.5m supply hose Soda blasting can also be used to clean engine parts, degrease parts, remove graffiti, remove mold, and repair damage caused by fire.

Condition: used, Year of construction: 2010, Powder coating line from 2010, in excellent condition. Currently in use, available for inspection and testing. Maximum part size: L x W x H = 2600 x 400 x 1850 mm Equipment Technological conveyor Automatic speed V = 1.2 m/min Speed regulation from 0.5 to 2.5 m/min Preparation station MNA-3-LPG, total length 16.7 m Entry area: L = 2.5 m a. Washing, degreasing and phosphating: L = 3.6 m Number of spray frames – 10 Number of nozzles in the frame – 18 Total number of nozzles – 180 Pump capacity – 162 m³/h Pump power – 15 kW 4 m³ capacity for active liquid Internal heat exchanger with LPG burner – 160 kW Temperature – 50°C Mechanical oil separator Filtration system Dosing system with diaphragm pump and regulator Washing time – 3 min b. Drip zone L = 3.1 m Drip time – 2 min 30 sec c. First rinse L = 1.2 m Number of spray frames – 4 Number of nozzles in the frame – 18 Total number of nozzles – 64 Pump capacity – 38 m³/h Pump power – 3 kW 1.5 m³ water capacity Rinse time – 1 min d. Drip zone L = 3.1 m Drip time – 2 min 30 sec e. Fine rinse L = 1.28 m Number of spray frames – 3 Number of nozzles in the frame – 18 Total number of nozzles – 54 Pump capacity – 33 m³/h 1.5 m³ water capacity Pump power – 3 kW Additional spray frame Rinse time – 1 min f. Drip zone L = 2 m Drip duration – 1 min 40 sec Three connections for the extraction system with three fans Working zone made of stainless steel Pipes made of PVC or stainless steel 1 pc. Automatic dryer after washing AST-1-KLPG: Dimensions of the working zone L x W x H = 7000 x 3000 x 2800 mm Air curtains on each side to reduce heat loss Indirect heat exchanger, heated by LPG, 200 kW Three fans, air supply 6000 m³/h Two connections for the extraction system Temperature sensor and regulator Overheating sensor Circulation sensor Working zone made of galvanized steel Thermal insulation 200 mm thick Drying time – 10 min 1 pc. Automatic polymerization oven APT-2-KLPG Working area dimensions L x W x H = 10200 x 3600 x 2800 mm Air curtains on one side to reduce heat loss Two indirect heat exchangers heated by LPG, each 300 kW Eight circulation fans, each with a capacity of 6000 m³/h Two connections for the exhaust system Temperature sensor and regulator Overheating sensor Circulation sensor Working area made of galvanized steel Thermal insulation 200 mm thick Polymerization time – 25 min 1 pc. Overhead rail transportation system for ATR paint shop: Straight rail with hangers L = 400 mm – 146 m Drive station – 2 pcs. Tension station – 1 pc. Chain lubrication station – 1 pc. Rail support structure drawings – 1 set. Ksdpfx Aev Ed Uksh Noll

Year of construction: 2023, operating hours: 6,000 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 2206006-01, VIBRATING FLIP-FLOP SCREEN MODEL “ZXX 2400/7200” TECHNICAL DATA Procuct charateristics:  Production: PURPLE  Gran size: 0 - 80 mm  Density: 0.4 – 0.5Tn/m3  Temperature: Ambient  Humidity: 55% Production characteristics:  Capacity: 50 Tn/h  Screening size: 10 – 15 mm  Machine production: Continuous  Material behavior: Known  Machine Characteristics Working length: 7200 mm Working width: 2400 mm o Working surface: 17.30 m² Frame: Carbon steel Execution: Supported o Slope: 20º Number of decks: 1 o Screen surface: Elastic polyurethane panels Klodov Hlnhjpfx Ah Nsl o Screening opening: 1-15 mm o Maths side closure: Polyiurethane wedges o Cover: Included, rubber o Vibrating weight: 7.500 kg  Vibrator characteristics: o Typeofvibrator: 2 Mechanical Vibrators o Centrifugal force: 42.500 kg o Frecuency: 860 r.p.m. Engine: Supply: Triphase 400 V, 50 Hz Power 24 Kw Speed: 860 r.p.m.  Vibration characteristics: o Stroke 8 mm o Frecuency: 950 r.p.m. o Aceleration: 4.6 G o Stroke subresonant frame: 8 mm + 8 mm = 16 mm Suspension system: o Tipodeantivibrantes: 8AMCsuspensions model AB-HD-50-2 o Isolation: 90% o Dynamic load: 4200 daN o Frecuency: 20 Hz  Paint finishing: o Cleaning and degreasing of surfaces. o Primary coat: glycerophtalic, 70 µ. o Finishing coat: glycerophtalic, 40 µ. o Color RAL to be defined

Condition: ready for operation (used), functionality: fully functional, Ultrasonic Cleaner Paint Stripping Installation RAX-8 The solvent cleaning machine consists of 2 parts: 1) The ASD; a 4-tank ultrasonic cleaning and degreasing system 2) The distillation column (still); a closed boiling tank with a vapor zone above it, including condensation and cooling coils. The condensate is continuously returned to tank 1 via a water separation system, and the contaminated BEVO thinner from tank 3 is automatically pumped out. Tank contents: Tank 1: 40.5 liter immersion tank temperature: 76°C-79°C Tank 2: 75 liter immersion tank temperature: 22°C-30°C Tank 3: 40.5 liter immersion tank (vapor tank) temperature: 77°C-82°C Kodpfx Aew Ewl Uoh Njll Tank 4 empty (evaporation/cooling) temperature: ambient temperature Distillation column max 60 liters temperature: 76°C-82°C The machine has been professionally connected by a certified electrician.

Condition: new, functionality: fully functional, Pretreatment system for wet chemical cleaning of workpieces to be coated - NEW - As a leading manufacturer of systems for surface technology, we offer you an almost limitless portfolio for powder coating applications. At our location in 47669 Wachtendonk, we put your individual needs into practice and produce your desired concept. Thanks to our own production for almost all components, we are flexible and can respond specifically to your requirements. With us, you not only get your ideal powder coating system - we also have comprehensive user expertise at your side to support you with all questions about surface technology. Every item offered here is manufactured especially for you. Regardless of whether it is a large or small project - we supply complete systems from a single source, according to your ideas. We look forward to hearing from you and implementing your ideas together! Here we offer you our newly manufactured VBH KM Pro pretreatment system for part dimensions of up to 4,000x1,400x2,000mm. System description: Pretreatment system for wet-chemical cleaning of workpieces before coating using the 3-zone process + nozzle line for loss. Equipment: -Washing stations for up to 2 traverses in one cleaning cycle -3 rails (1 middle, 2 side washing stations) -Washing ring with removable middle nozzle line (Info: The middle nozzle line is used when 2 rails with flat workpieces are to be cleaned at the same time; without the middle nozzle line, wider workpieces can be moved in and cleaned on the middle guide rail.) -4 washing zones (degreasing circuit, 1st rinse (pre-rinse) circuit, 2nd rinse (final rinse) demineralized water cascading to degreasing basin 1 -final spray ring (zone 4) for passivation in the no-rinse process when pulling out the goods carriers (duration of fogging adjustable) Passivation is injected into demineralized water. Inlet in basin 1. -2 storage containers made of stainless steel including level monitoring (sink 1 + demineralized sink) -1 stainless steel container insulated, as electrically heated, including level monitoring (degreasing) -Drain taps on the basins for disposal, cleaning and new preparation -Supply of the VE water requirement via mixed bed cartridges -Exhaust fan to remove the water vapor to the outside including exhaust pipe Klodjtxcyiopfx Ah Nel -Cabin made of stainless steel -Loading via double-wing door -Operating terminal (PLC controlled) outside the washing cabin -Control via PLC and touch display including remote maintenance module -Intuitive, illustrated operation for quick and easy handling Suitability: -particularly for flat workpieces, as the use of the central line means 2 product carriers can be cleaned at the same time -Frames and uncomplicated, open geometries up to a maximum of 1,000 mm wide can also be cleaned well Advantages: -Personnel-free, automatic cleaning, within approx. 20 minutes. -optimal adhesion properties especially for the subsequent coating -fully parameterizable process program from KM Industrieservice, thus completely flexible for changed chemical systems -lifetime support and spare parts availability from KM Industrieservice -cost-effective pretreatment solution with service life-optimized tank quality, thus also cost-effective wastewater disposal We can send you a video link to this system on request.

Condition: new, Year of construction: 2025, Equipment: CE marking, Versatile 3-in-1 fiber laser with 3kW power, suitable for: - Cutting various metal sheets with high precision. - Welding with clean, strong weld seams. - Cleaning and degreasing surfaces before further processing. ✅ Compact and user-friendly design ✅ Ideal for workshops and metalworking companies ✅ Efficient alternative to multiple individual machines Kljdpfx Ahjw Srtfe Nel Technical specifications: Power: 3 kW Functions: Cutting, welding, cleaning Application: Steel, stainless steel, aluminum, ... Availability: Immediately available from our showroom in Belgium Warranty: 2 years

Condition: excellent (used), Year of construction: 2019, TITANIUM PICKLING PLANT Klsdpfjxa Dmljx Ah Nol Comprises 16 tanks Tank – Degreasing, large 1150 x 1000 x 1200/1250 mm Tank – Rinsing Tank – Hot rinse Tank – Etching Circulation pump 1 - Level probe; PTFE 1 - Temperature sensor 1 - Manual top-up DI water valve 1 - Manual lid 1 - Supports 2 Complete titanium pickling plant

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: 3945, Retort Type Mesh Belt Furnace Typ: BLH with protective gas atmosphere Heat treatment line with protective atmosphere KOHNLE BLH-950-250/50-1800 Year of production: 2003 Serial number 3945 Hardening in a protective atmosphere, cooling in oil, washing and degreasing and tempering It consists of - Vibrator for charging - 300 kg capacity Kjdew Tcruopfx Ah Noll - Magnetic conveyor for filling the furnace - Tempering furnace - max working temperature 950 C 3 temperature control zones strip width 250 mm Capacity 30-50 kg/h Tunnel length 1800 mm Protective atmosphere Propane (possible change of gas for a protective atmosphere) - Oil quench with cooling oil, temperature 70C - Magnetic conveyor for extracting goods - Stand for washing and degreasing - vibrator for charging Annealing furnace - max temperature 500 C Control cabinet SIEMENS ALL ORIGINAL TECHNICAL DOCUMENTATION FROM THE MACHINE Installation dimensions 17 m x 2 m x 2.5 m The furnace can also be modified for nitrocarburizing. Dismantling and loading costs are charged additionally The price of the mentioned line is not fixed for serious enquiries

Condition: new, internal dimension 550 x 730 x 400 mm 0 185 l operating pressure 5-8 bar weight 50 kg dimensions 0,7 x 0,6 x 1,35 m Specification: Large lockable flap. Comfortable gloves. Multifunctional cleaning sprayer. LED lighting. Air blower. Ksdpfjupxigox Ah Noll Readable pressure gauge. Adjustable air pressure regulator. Removable cleaning grid. Removable filter for dirt. Removable water collection tray. Internal dimensions (LxWxH) 550 x 730 x 400 mm Interior volume 185 l Operating pressure 5-8 bar Weight 50kg Dimensions L x W x H 0.7 x 0.6 x 1.35 m Since this parts cleaner has a thermostat that sets the degreaser to 50 Degrees Celsius can heat up, it is advisable to use this degreasing cabin To be used in combination with the Eurol cold degreaser HF Plus. This degreaser has a higher flash point than the usual cold degreasers.

Condition: new, SAPI Powder Coating The Perfect Coating for Lasting Protection. Powder coating is a highly effective and widely used method for applying a protective and decorative surface to various types of substrates. It is a dry finishing process where a fine powder made of resins, pigments, and additives is applied to a substrate. The powder is electrostatically charged, allowing it to adhere evenly to the surface and form a uniform coating. To achieve optimal adhesion and durability, the substrate is thoroughly cleaned and prepared first. Oils, dirt, and other contaminants are removed to ensure a clean surface. This is crucial for ensuring that the powder bonds effectively to the substrate, creating a strong and long-lasting coating. Components of a Powder Coating System A typical powder coating system consists of several components and devices required for applying and curing the powder coating. Spray Booth and Spray Area The booth provides a clean environment for the application process and ensures an even distribution of the powder. 🎨 Powder Coating Gun A powder coating gun is used to apply the powder coating to the workpiece. 💨 Klsdpfx Ahjun Sd Ue Nsl Powder Feed System The powder feed system consists of a hopper or container where the powder coating material is stored. It typically includes devices like powder pumps, feed hoses, and powder sieves to transport the powder from storage to the spray gun. 🔄 Pre-treatment Equipment Pre-treatment systems are used to prepare the substrate before applying the powder coating. This can include processes like cleaning, degreasing, rinsing, and surface treatment to ensure proper adhesion and durability of the coating. 🧼 Curing Oven A curing oven is a crucial component of a powder coating system. It is used to heat the coated substrate to the correct temperature so the powder coating melts, flows, and hardens into a permanent surface. The oven usually consists of a conveyor system or racks to transport the coated parts through the oven chamber. 🔥 Exhaust System An exhaust system is installed to remove excess powder, fumes, or volatile compounds generated during the coating process. It helps maintain a clean and safe work environment for the personnel and prevents the accumulation of powder particles in the air. 🌬️ Looking for a Powder Coating Solution? Are you searching for a custom powder coating solution? We specialize in providing tailored powder coating solutions to meet your individual needs. Whether you have specific color requirements, complex designs, or challenging substrates, our experienced team is ready to deliver exceptional results. 💡 Contact us today to discuss your requirements, and let us develop a custom powder coating solution for you. 📞 Get in touch with us today!

Condition: new, Year of construction: 2025, SAPI Powder Coating Kedpswf Dpgjfx Ah Nsll The perfect layer for lasting protection. Powder coating is a highly effective and widely used method for applying a protective and decorative finish to various types of surfaces. It is a dry finishing process in which a fine powder composed of resin, pigments, and additives is applied to a substrate. The powder is electrostatically charged so that it adheres evenly to the surface, forming a uniform coating. To achieve optimal adhesion and durability, the substrate is first thoroughly cleaned and prepared. Oils, dirt, and other contaminants are removed to ensure a clean surface. This is crucial for the powder to bond effectively to the substrate and achieve a strong and long-lasting coating. A powder coating system typically consists of various components and equipment required for the application and curing of powder coatings. SAPI_Powder_spray_gun Spray Booth and Spray Area The booth provides a clean environment for the application process and ensures even powder distribution. Powder Coating Gun A powder coating gun is used to apply the powder coating to the workpiece. Powder Feed System The powder feed system consists of a hopper or container in which the powder coating material is stored. It typically includes equipment such as powder pumps, feed hoses, and powder screens to transport the powder from storage to the spray gun. Pretreatment Equipment Pretreatment equipment is used to prepare the substrate before the powder coating is applied. This may include processes such as cleaning, degreasing, rinsing, and surface treatment to ensure good adhesion and durability of the coating. Curing Oven A curing oven is an essential component of a powder coating system. It is used to heat the coated substrate to the correct temperature so that the powder coating can melt, flow, and cure into a durable finish. The oven typically consists of a conveyor system or racks to transport the coated parts through the oven chamber. Exhaust system An exhaust system will be installed in the facility to extract excess powder, fumes, or volatile compounds generated during the coating process. This system helps maintain a clean and safe working environment for personnel and prevents the accumulation of powder particles in the air.

Condition: good (used), Year of construction: 2003, Well-maintained perchloroethylene washing system, Washing cycles: pre-wash and main wash, Steam degreasing and conservation one additional tank, Useful dimensions: l 530 x w 320 x h 200 mm, Voltage: 400V 50 Hz Power requirement: 58.5 kW, Accessories: 1 - Air-cooled, 3rd bath as conservation bath, 2 - Adjustable turbulence-immersion washing system, 3 - Basket rotation device, basket clamping device, 4 - Acid detector for LM Per, exhaust-free with activated carbon, 5 - Automatic dual-track loading system, 6 - Batch preselection for up to 20 washing programs, Klsdsw I Exyjpfx Ah Nol 7 - Filter-in-filter for pre-wash bath, Dimensions/weight Washing unit: L 4.40 x W 2.20 x H 2.40 m, Weight: 6000 kg automatic loading: 3.90 x 1.40 x H 1.40 m, Weight: 700 kg, Additional tank: 2.20 x 1.20 x 1.40, weight 800 kg

Condition: new, Year of construction: 2024, SJET Series, multi-purpose industrial part washers which are very easy to operate. Rotary table washer. Rotary table parts washer. Perfect parts washing systems for degreasing and maintenance purpose cleaning. Operating Principle : After the basket is loaded to the machine hot water mixed with cleaning detergent is sprayed to the rotating basket. Specially mounted stainless stell nozzles and rotational movement of the basket provides perfect cleaning for all parts inside the basket. Water is filtered before returning to the tank which provides extended lifetime for detergent and minimise cost. SJET series reduces consumption of water and detergent and help you protect the environment SJETs are manufactured using AISI 304 stainless steel. Different basket dimensions and capacities are available. Kljdpfx Ahsd I Aw Ee Nel Rinsing and drying options are available. Different lid types are available. Rotary basket washer Please feel free to contact for other details and options.