Used Defective Winding Machine for sale (92,203)

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 04006, For sale is a stretch wrapping machine with a conveyor belt and scale. The machine was in the shipping department. Several programs can be started directly on the machine or via a cable switch (operated from the forklift). Process: The package is placed on the roller table of the machine by a forklift. The machine starts at the push of a button, is wrapped automatically, the film is separated, the package moves along a roller conveyor to the unloading station, and is weighed. The package is unloaded from the unloading station by a forklift. Isdewl Hp Nepfx Afijtn All information is provided without guarantee. Sale to commercial customers only. Viewing by appointment in 94424 Arnstorf (Germany). Pickup in 94424 Arnstorf (Germany).

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Fully automatic stretch wrapping machine Spinny S2300 with electromechanical top press Pallet dimensions: L 1200 x W 800 x H 2600 mm Maximum weight: 1000 kg Hourly rate: approx. 20 pallets/hour (depending on pallet height and wrapping pattern) Conveyor height: 500 mm Technical specifications: • Wrapping cycle programmable via electronic control panel and SIEMENS S7-1200, KTP700 operator panel Iedpewxrh Dofx Afiotn • Control system: SIEMENS PLC S7-1200 SAFE and HMI KTP700 • 15 freely programmable wrapping programs • Turntable stop at end position • Conveyor height: 500 mm • Usable width of roller conveyor: 1000 mm • Photoelectric cell for automatic pallet height detection • Clamp for attaching film to the pallet load • Automatic film cutting system at the end of the wrapping cycle • Frequency inverter for adjusting turntable speed from 5 to 15 rpm • Frequency inverter for adjusting film carriage speed • Powerstretch 250% • Film welding with hot pad counter-blade • Standard colors: Grey RAL 7001 for fixed parts, Grey RAL 7016 for moving parts and plastic covers • Volt-free contacts • 1 frequency inverter for controlling conveyor at turntable POWER SUPPLY > Power supply: 400 V, 50 Hz, 3-phase + PE > Frequency: 50 Hz > Installed power: 3 kW > Auxiliary power supply: 24 V DC > Compressed air: 6 bar FILM AND ROLL CHARACTERISTICS > Thickness: 12 ÷ 23 µm > Recommended thickness: 20 µm > Core diameter: 76 mm > Height: 500 mm > Maximum roll weight: 16 kg > Maximum outer roll diameter: 250 mm Powered roller conveyor for outfeed, with double sprockets, frequency controlled Length: 1470 mm Usable width: 1000 mm Height: 500 mm Roller diameter: 89 mm Pitch: 158.75 mm 2 pcs. SICK M40 UE403 PSD01 1047810 Safety light curtains, safety category 4, safety fences, height: 2200 mm with access door, dual-channel safety magnetic sensor integrated in safety control

Year of construction: 1984, condition: used, Printing machine, embossing machine, stamping machine -without function, control: defective Itedpsd Hp Tzjfx Afijn -pneumatic-hydraulic press - Stroke: 50mm - clearance between columns: 850 mm -Table surface: 400 x 370 mm -Dimensions: 1285/590/H1820 mm -Weight: 416 kg

Condition: ready for operation (used), Year of construction: 1972, functionality: fully functional, spring diameter: 200 mm, wire diameter (max.): 12 mm, Spring winder with a large accessory package! TECHNICAL DETAILS Wire diameter: 2.0 - 12 mm Round steel wire gauge: Ø 5.0 - 14.0 mm Square steel wire gauge: 5.0 - 12.5 mm Feed length: 17,400 mm Wire feed speed F1: 40 m/min Wire feed speed F2: 28 m/min Wire feed speed F3: 20 m/min Springs Spring diameter: Ø 25 - 200 mm Outside diameter (current setting): 34 mm Length (current setting): 135 mm Output range (output): 1 - 70 pieces/min End product options: Right- and left-handed tension/compression springs Current end product: Tension spring, wire Ø 4 mm Iedpfxowlp Eaj Afiotn Control Control system: Process Controller BRANKAMP MACHINE DETAILS Machine weight: approx. 10.5 t Machine dimensions (L × W × H): 2,600 × 1,800 × 2,700 mm Lubrication system (L × W × H): 600 × 400 × 800 mm Control cabinet (L × W × H): 500 × 1,200 × 2,100 mm Reel (L × W × H): 2,600 × 1,800 × 2,700 mm Total power requirement: 18.5 kW EQUIPMENT - 6 feed rolls for wire intake Ø 4 mm - Lubrication system - Wire reel reel - Control cabinet cooler - Reel - Control panel with BRANKAMP Process Controller - Accessories and spare parts: approx. 105 wire reels + approx. 13 wire guides - New purchase value approx. €100,000

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, Fully automatic machine with pneumatic control and PLC system for the production of small diameter rolls Specification: Wrapping material: parchment, cooking paper Paper thickness: 10 - 70 g/m2 Speed: 500 rolls of 15 m / hour Working width: 200 mm - 420 mm Iodpfx Afsv Dutuoijtn Main roll of maximum diameter: 1000 mm The maximum diameter of the finished roll: 60 mm Electrical connection: 400 V, 50 Hz Power consumption: 6 kVA Air consumption: 200-400 l/min at 6 bar Weight: 1200 kg

Year of construction: 1994, condition: excellent (used), Description:-table diameter 1400 mm -Table load of Max 3000 kg -Belt width of 150 mm -Speed max. 25m / min Iedpfxed Iw U Uj Afistn -Belt thickness max. 1.2 mm Very compact and easy-to-use palette Unwinder diameter of turntable 1400 mm of more robust machine body with high capacity speed control of cam universally suitable for Multicoil

Condition: good (used), Year of construction: 2011, Unit for unwinding and feeding pre-products Year 2011 Itodpfsv Sddfox Afien

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: PET09622A, Automatic winding and packaging machine for flexible spiral hoses, pipes, corrugated hoses, and hoses with an outer diameter of 8 mm to 40 mm. After winding, the coil is wrapped with stretch film and, if necessary, automatically labeled by the label printer. The total of six loading units are loaded with hose sections and wound up one after the other. The package includes a wide range of spare parts. These include: Omron servo axle drives, trailing cables for drives and valve terminals, various pneumatic components, drive belts, sensors, etc. Capacity: 60 coils/hour Isdpfowd Emwox Afistn Min. inner diameter of coil: 200 mm Max. inner diameter of coil: 380 mm Max. outer diameter of coil: 850 mm Min. width of coil: 120 mm Max. width of coil: 340 mm The technical data sheet can be found below the images; the operating instructions are attached.

Year of construction: 1985, condition: used, Extraction machine for taps -Handover in the current condition as seen -Current consumption: too high, machine as spare parts carrier -Manufacturer: Electro ARC, extraction machine for taps or similar tools -Clamping table: 660 x 460 mm -Outreach: 250 to 480 mm -Columns Ø: 70 mm -Dimensions: 930/780/H2045 mm -Weight: 402 kg Itjdpfxei Huvhs Afisn

Year of construction: 1997, condition: ready for operation (used), functionality: fully functional, Strip cutting and winding machine manufactured by Stammkötter Type 400 SSM working width 350 mm Material thickness 0.6 - 1 mm Minimum width of the cut material 10 mm Max. roll diameter 650 mm Unwind shaft 152 mm Itedjvaw A Dspfx Afisn Rewind shaft 204 mm Incl. spare shaft for cutting device, various spare blades if available.

Condition: good (used), Year of construction: 2004, operating hours: 2,645 h, functionality: fully functional, machine/vehicle number: ASS 2000, Used wrapping machine including protective fence for self-dismantling and self-collection in Gimbsheim. Itodpfx Afeuu Ebgsion

Year of construction: 2003, condition: good (used), - Fully automatic - For packing bar shaped products - Product height (mm): 19 - 600 - Product width (mm): 600 - 2100 - Product length (mm): 2400 - 5700 - Product weight (kg): 3000 - max. cross-section diagonal (mm): 2184 - Brake motor for winding ring drive: controlled by frequency converter - 2 driven roller conveyors: each 3000 mm long for the infeed side of the machine, equipped with brake motor - 2 driven roller conveyors: for the outfeed side of the machine (1 piece 3000 mm long, 1 piece 4400 mm long) executed with brake motor - 1 packing material take-up: for stretch film, crepe paper, PE film etc. - packing material roll width max. (mm): 500 - Automatic gripping, cutting and feeding device: for PE stretch film, in smooth cut version - Electrical device for laying edge protection beads at the beginning and end of the product to be wrapped: preselectable by means of a timer - Electric power pre-stretch system: for PE stretch film with thickness 17 - 50 my Iedpfxehyxfvj Afiotn - Machine length (mm): approx. 2000 - Machine width (mm): approx. 3400 /3800 - Machine height (mm): approx. 2200 above floor level

Condition: new, Plastic film wrapping packing machine Itedpsd A Udnofx Afien Adjustable rotation speed. Table diameter depending on the customer request. Manual or automatic processing. Various recordings and accessories for different task areas.

Year of construction: 1993, condition: used, functionality: fully functional, machine/vehicle number: 8839, Rewinding machine for surface-sensitive materials such as papers between 30 and 300 g/m², films, etc. Working width max. 1800 mm, 2 rewinding stations for cores with 50 mm diameter. Itedpfx Aottg E Isfijn Attention: the second (rear) unwind visible in the video is not for sale, only the shaftless (front) unwind. For further details see attached PDF file.

Year of construction: 1987, condition: ready for operation (used), Max. coil weight: 10t, controls: SIEMENS S5, without documentation. Iedpfogwg Udsx Afistn

Condition: good (used), 5x THALER cable rewinding machines, - second-hand - : Price per piece ex location: 6.500.-€ (net) disassembled, packed and loaded! Itsdpeu T Evysfx Afisn Manufacturer: Thaler Type: unknown Year of construction: unknown Condition: good Available: from approx. mid-December 2024 Location: Simmern (Hunsrück)

Condition: not inspected (used), Coiling machine for rewinding coils / sheet metal strip. Coiler outer diameter: 1200 mm. Variable positions: horizontal and vertical. Hydraulically tilt operated with air brake. More coilers on stock: Soprem, ALO Teknik, Kohler, Bruderer, Rapid Air. Iodpfxogu Nymj Afijtn As well servo feeders and used flash butt welding machines Ideal BAS 100, Ideal BAS 050, Ideal BAS 120...

Condition: good (used), Year of construction: 1997, 1. Barberan profile winding machine TYPE RP-30 Profile width 10-280 mm Profile height 2-80 mm Minimum profile length 500 mm The width of the material on the roll is a maximum of 280 mm Width of the veneer strips 25-280 mm Glue temperature 220 degrees C Diameter of the transport rollers 200 mm Width of the transport rollers 2 x 15 mm Iedpfx Aen Nv N Uefietn Maximum roller spacing 250 mm Feed speed 10-60 m/min Working height 900 mm Photos no. 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 2. Friz profile winding machine Type Friz MR 30 The table is approx. 3200 mm long Profile winding machine Friz MR 30 for foils up to 300 mm Width Hardo adhesive applicator Pressure rollers Labeling table Everything as in the pictures, more pictures on request Dimensions approx. 15000 x 3000 x 3000 mm Weight approx. 5000 kg Photos no. 11, 12, 13, 14, 15, 16, 17

Year of construction: 2020, condition: new, A fully automated film rewinding machine according to GMP guidelines. Foil rewinding machine type FUM-900 CP This film rewinding machine is used to rewind film rolls that have run in large systems or are not wound with the correct winding tension, and thus to prepare them for further processing. It was designed according to the special pharmaceutical guidelines and for the processing of PVC film. Advantage of our machine: with two separate drives, we can guarantee both right and left winding. Itodpfx Afefwfpbsien Technical details: Width: 1,600 mm Depth: 850 mm Height: 1,100 mm Materials: In contact with the product: 1.4301 / acrylic Performance: up to 120 m / s Speed: infinitely variable Ø film rolls: max. 450 mm Connection: 230 V / 50 Hz Drive: direct current 0.25 kW

Condition: new, power: 110 kW (149.56 HP), Year of construction: 2025, Bauxite Crusher: Bauxite is an aluminum ore, and crushers or mills are used to break down the bauxite into smaller pieces for further processing. Jaw crushers, impact crushers, or cone crushers may be used for this purpose. Granite Crusher: Granite is a hard and durable natural stone. Crushers used for granite crushing typically include jaw crushers, impact crushers, and cone crushers. These crushers can handle the varying hardness of granite and produce different sizes of crushed products. Bentonite Crusher: Bentonite is a type of clay with excellent water-absorbing and plasticity properties. Crushers such as jaw crushers or cone crushers are used to break down the bentonite into a manageable size for further processing. Barite Crusher: Barite, also known as baryte, is a mineral consisting of barium sulfate. Crushers like jaw crushers and cone crushers are commonly used in the crushing process of barite. Impact crushers may also be used for shaping and processing finer particles. Itodpfxeq Nx Apo Afion For each of these minerals, the selection of the appropriate crusher depends on factors such as the hardness of the material, the required final product size, and the specific characteristics of the deposit. It's also important to consider whether a primary crusher, secondary crusher, or even tertiary crusher is needed in the processing flow. Additionally, for certain applications, grinding mills may be employed after the initial crushing stage to further reduce the size of the particles. Grinding mills suitable for these minerals might include ball mills, Raymond mills, or vertical roller mills, depending on the specific requirements of the process. Remember that the choice of crushers and mills is often part of a larger mineral processing plant design, and the selection process should take into account the overall production requirements, mineral characteristics, and economic considerations.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, overall weight: 750 kg, Black Garlic Fermentation Machine Model HY-100 Input Capacity 100 kg/batch Output Capacity Approximately 50 kg/batch Machine Dimensions 1530 * 1450 * 2250 mm (L * W * H) Packing Dimensions 1700 * 1550 * 2070 mm Net Weight 600 kg Gross Weight 750 kg Power 4 kW Voltage & Electrical Phase Customizable Process Cycle 20 days Fermentation Support 1 pc Fermentation Tray 20 pcs Working Hours 24 hours Iodpfoxptytsx Afietn Control System PLC Automatic Control Control Interface Scalable Temperature Fluctuation ±1 ℃ Humidity Fluctuation ±0.5 ℃ Insulation layer material mineral wool, thickness 100 mm Material Both inner and outer walls are made of 304 stainless steel

Condition: new, Year of construction: 2025, -TFON Leveltech® XS-3520 Leveling Machine -The TFON Leveltech® XS-3520 is a compact and efficient leveling solution designed for thin materials and smaller widths. Equipped with advanced electromechanical controls and user-friendly touchscreen operation, it delivers precision leveling with reliable overload protection for enhanced safety.. -Key Specifications: Material Thickness: 0.3 mm – 5.0 mm Itodpfx Ajityvfsfisn Maximum Material Width: 200 mm Minimum Material Length: 70 mm Flattening Gap Adjustment: Electromechanical / PLC Controlled Overload Protection: Standard Control Interface: Touchscreen HMI Machine Weight: 2,000 kg Machine Dimensions(L × W × H): 2,225 × 1,595 × 1,850 mm

Condition: new, functionality: fully functional, Year of construction: 2025, The VSI (Vertical Shaft Impactor) sand making machine is a type of crusher designed to accelerate the crushing of aggregate and produce cubical-shaped sand. It is widely used in the field of construction, mining, and other similar industries. Here are key features and information about VSI sand making machines: 1. Working Principle: - The VSI sand making machine operates on the principle of stone impacting stone or stone impacting iron. Material is fed into the center of the rotor, which accelerates to high speed to throw the material outward against a wear-resistant lining. 2. Rotor and Crushing Chamber: - The rotor is a crucial part of the VSI machine and is often designed with multiple pockets to facilitate material throwing and crushing. - The crushing chamber is lined with wear-resistant materials to endure the impact and abrasion during the crushing process. 3. Feedstock Control: - The feedstock (material to be crushed) can be controlled using a variable speed control system, allowing for adjustments to achieve the desired particle size. Itodpfx Afsq Nd U Heion 4. Material Types: - VSI machines are suitable for processing various materials, including hard and abrasive materials such as rocks, ores, and minerals. 5. Cubical Shaping: - One of the significant advantages of VSI machines is their ability to produce cubical-shaped end products, which is desirable for high-quality concrete and asphalt production. 6. Adjustable Discharge: - The machine usually has an adjustable discharge opening, allowing for customization of the final product size. 7. Sand Production: - VSI sand making machines are primarily used to produce manufactured sand (M-sand) and crushed sand, which are essential components in the construction industry. 8. Maintenance: - Regular maintenance is required to ensure optimal performance and extend the machine's lifespan. This includes checking wear parts, lubrication, and addressing any issues promptly. 9. Variations: - Different manufacturers may offer variations of VSI machines with unique features or specifications. Common variations include open rotor and closed rotor designs. 10. Environmental Considerations: - VSI sand making machines are generally considered environmentally friendly as they produce less dust and noise compared to traditional crushers. 11. Manufacturers: - Well-known manufacturers produce VSI sand making machines, and it's crucial to choose a reputable supplier with a track record of providing reliable equipment. When considering a VSI sand making machine, factors such as feed size, capacity, and the desired end product specifications should be taken into account. Additionally, check the reputation of the manufacturer, and consider customer reviews and feedback regarding the specific model you are interested in.

Condition: new, Year of construction: 2025, Creating a cheap portable or mobile sand making plant involves optimizing costs while maintaining functionality and efficiency. Here's a basic outline of components and considerations for designing a cost-effective portable sand making plant: 1. Portable Sand Making Machine: - Select a cost-effective sand making machine that meets your production requirements. Consider factors like capacity, efficiency, and maintenance costs. - Look for options that offer good performance at a lower initial investment. 2. Screening Equipment: - Choose a portable screening unit to separate the sand into different sizes. This is crucial for producing high-quality sand with the desired particle size distribution. - Consider modular screening units that are easy to transport and set up. 3. Conveyor Systems: - Utilize conveyors to transport raw materials between different components of the plant. Opt for simple and reliable conveyor systems. - Explore cost-effective conveyor options that are easy to maintain. 4. Hopper and Feeder: - Incorporate a hopper and feeder system to ensure a continuous flow of raw materials to the sand making machine. This helps optimize the production process. - Choose a design that minimizes material spillage and wastage. 5. Power Source: - Consider energy-efficient power sources to reduce operational costs. This could include using generators or connecting to the electrical grid, depending on the availability and cost of electricity in your location. 6. Chassis and Mobility: - Opt for a simple and robust chassis design that allows for easy transportation. Depending on your needs, choose between wheels or tracks for mobility. - Aim for a design that facilitates quick setup and dismantling to save time and labor costs. 7. Control System: Isdjq N Ud Ijpfx Afiotn - Implement a user-friendly control system that enables operators to monitor and adjust the sand making process efficiently. - Consider automation features that enhance control and reduce the need for constant manual intervention. 8. Dust Control and Environmental Considerations: - Integrate effective dust control measures to comply with environmental regulations and ensure a safe working environment. - Explore environmentally friendly features to align with sustainability goals. 9. Modular Design: - Consider a modular design for easy customization and scalability. This allows you to adapt the plant to varying production needs over time. 10. Used Equipment: - Explore the possibility of using refurbished or used equipment to cut down on initial costs. Ensure that the used equipment is in good working condition and can meet your production requirements. Remember that while cost optimization is important, it's crucial to maintain the quality and efficiency of the sand making process. Additionally, compliance with environmental regulations should be a priority. Always consider the specific requirements of your project and seek professional advice if needed.

Condition: new, Year of construction: 2025, Gravel and aggregate production equipment is used to crush, screen, and process stones, rocks, and other materials for the construction industry. This equipment is essential in producing various types of aggregates, including crushed stone, gravel, sand, and recycled concrete, which are used in the construction of roads, buildings, bridges, and other infrastructure projects. Here are some common types of equipment used in gravel and aggregate production: 1. Jaw Crusher: - Jaw crushers are primary crushers used to break down large rocks into smaller, more manageable pieces. They are essential for the initial stage of aggregate production. 2. Impact Crusher: - Impact crushers are used to crush rocks and stones with the help of impact force. They are suitable for shaping and producing fine aggregates. 3. Cone Crusher: - Cone crushers are often used for secondary and tertiary crushing in aggregate production. They produce well-shaped and finely graded aggregates. 4. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are designed for shaping and producing high-quality artificial sand. They are suitable for processing materials with high abrasiveness. 5. Screens: - Vibrating screens are used to separate different sizes of aggregates. They classify the material based on particle size and ensure that the final products meet specified gradation requirements. 6. Scalping Screens: - Scalping screens are used to remove oversized materials before they reach the primary crusher. This helps to optimize the crushing process and prevent damage to the equipment. 7. Washing Equipment: - Washing equipment, such as sand screws or log washers, is used to remove impurities and fine particles from aggregates. This is particularly important for producing high-quality concrete sand. 8. Conveyors: - Conveyors are used to transport materials between different stages of the crushing and screening process. They play a crucial role in enhancing efficiency in material handling. Ijdjq Nxz Djpfx Afietn 9. Stackers and Reclaimers: - Stackers are used to create stockpiles of processed aggregates, while reclaimers are used to retrieve the material from the stockpile. Both are essential for efficient material storage and handling. 10. Crushing Plants: - Complete crushing plants include various types of crushers, screens, and conveyors integrated into a single system. These plants are designed to handle large volumes of material efficiently.