Used Deep Relaxed for sale (1,252)

Year of construction: 2021, condition: ready for operation (used), A semi-automatic vacuum skin packaging machine (tray sealer) Sealed Air for Darfresh skin packaging is available. Packaging capacity: 15/min, cycle performance: 1.5 cycles/min, film width: 562mm, max. product dimensions X/Y/Z: 670mm/470mm/50mm, tray length range: 135mm-700mm, tray width range: 120mm-520mm, tray height range: 5mm-50mm. Machine dimensions X/Y/Z: approx. 1050mm/1650mm/1250mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible. Fjdpfx Afsxaphberjgi

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, IMSA DRILLING MACHINE Model MF1100BBLL 6P Year 2010 Control unit: SELCA 4045 X-axis travel: 2200 Y-axis travel: 1000 Table length: 1000 Table width: 1200 Maximum workpiece size (length x width x height): D.2100 x H.1300 Table surface: Tapped holes Maximum workpiece weight: 10000 Spindle speed: 4000 Spindle connection: ISO 40 Torque (continuous / 10 min): 1200 Nm Number of tools: 108 6-position pallet changer MACHINE EQUIPPED WITH A LANCE CHANGER AND TOOL CHANGER FOR MILLING HEAD Fjdez An Tnjpfx Afregi MACHINE IN EXCELLENT CONDITION AVAILABLE FOR INSPECTION WHILE IN OPERATION

Condition: refurbished (used), Year of construction: 2019, TECHNICAL DETAILS Drilling depth: 1,400 mm Full drilling range: 40 mm Spindle speed: 670 - 3,560 rpm Center height over bed: 380 mm Center height over floor: 1,400 mm Table length: 1,200 mm Table width: 1,200 mm Cross table travel: 2 x 400 mm Center height over table: 250 – 600 mm Z-axis Feed rate: 0-7,000 mm/min W-axis - 400 mm Feed rate: 0-7,000 mm/min X-axis - 800 mm Feed rate: 0-2,000 mm/min Y-axis - 350 mm Feed rate: 0-3,000 mm/min Rapid traverse speed: 3.5 m/min Motor nominal speed: 8,000 rpm Motor rated output: 18.5 kW MACHINE DETAILS Fsdpsw Ekfusfx Afrogi Operating voltage: 380 V Frequency: 50 Hz Connected load: 40 kW Total length: 6,500 mm Total width: 3,500 mm Total height: 2,900 mm Weight: 8 t EQUIPMENT Manufacturer: Siemens Sinumerik 840 Dsl Including 1,700 l coolant system 20 solid carbide single-lip drills, diameters 6 mm to 20 mm, lengths 1,200 mm to 1,750 mm

Condition: like new (used), Year of construction: 2005, functionality: fully functional, GÖTZINGER RBS Dowel and Stair Drilling Machine, Swiveling with Laser In very good condition, the machine has been used very little and is in absolutely like-new condition; it comes from an educational institution. It can be used to drill dowel holes and similar. The machine has a BKF-5 drilling head with 5 drill chucks, M10 internal thread. The distance between the drill chucks is 32 mm horizontally and 25 mm vertically. The entire drilling head can be swiveled 360° with a degree indicator and various scales. A standard 2-jaw chuck can also be used. You will also receive 3 additional drill chucks for drills with a cylindrical shank of 12 or 16 mm, and for drills with an M10 external thread. The machine table is 1100 mm wide and 250 mm deep. There is a stop at the front that can be recessed if needed. For the production of dowel joints, there are 2 adjustable angle stops on the machine table, which can be set with an accurate scale. In addition, there are two 2500 mm long stop rails with 2 folding stops and a scale each; these stop rails can be mounted on the left and right. The machine drills completely automatically, which was problematic with larger drill diameters. For this reason, the machine has been converted to manual feed via a feed lever and switch. The workpiece is clamped with 2 pneumatic clamping cylinders; the switch is located directly on the clamping cylinder. 380V, 2100W 2820 rpm Year of manufacture: 2005 Weight: approx. 300 kg With this machine, you can produce all types of frame dowel joints, at right angles, butt joints, and miter joints. Ideal for the production of dowel joints in timber frame construction, furniture, door and window construction, and similar applications. Stairs can be manufactured very well due to the swiveling capability. The drilling unit can be swiveled to both sides up to 65° with a scale and has a detent at 0°. This allows handrails to be drilled very well into stair stringers with the machine. Due to the stops, the drilling head, and the construction of the machine, dowel joints are produced in a very short time, which makes the machine very economical. The machine requires a compressed air connection of 6 bar (the air consumption is very low). Right-hand rotation. Mills and drills very well and cleanly. The linear laser at the top of the machine allows marked dowel holes and angles to be drilled very quickly and accurately. The max. drilling height is 100 mm; the drilling height is adjusted at the front under the machine table with a handwheel. The height can be read on a very precise, mechanical counter. The max. drilling hole depth is 190 mm with a stop and scale. The max. workpiece height is 360 mm. Everything functions perfectly. Comes with a manual. Fedszgh Tvjpfx Afregi We will personally deliver and demonstrate the machine anywhere in Germany for 220.00 euros. This means you have no risk when purchasing. Delivery to Austria and the rest of the EU is also possible upon request. Professional equipment, not hardware store junk. You can start working with the machine immediately. Very stable and durable construction. The precision guides with the backlash-free ball bearing bushings are in good condition and move easily. The swiveling mechanism is also very smooth due to the 2 groove ball bearings; locking is possible with a locking screw.

Condition: new, load capacity per storage section: 2,000 kg, total width: 500 mm, total height: 2,000 mm, total length: 2,360 mm, number of shelf rows: 6, Thousands of further variants in stock and configurable online – fast delivery. For the rack shown in the picture: Price net 495.00 EUR (589 EUR incl. 19 % VAT) Delivery to Germany and Austria: 99 EUR net. Free delivery from 500 EUR order value. Volume discount (also for several racks combined): - from 2,000 EUR order value: 10 % - from 4,000 EUR order value: 15 % - from 8,000 EUR order value: 20 % For the rack shown in the picture: Length: 2.4 m (1 bay of 225 cm) Height: 2.0 m Depth: 0.5 m Levels: 6 (incl. floor level), 6 shelves Max. shelf load: 500 kg per shelf (evenly distributed) Max. bay load: 2,000 kg Shelves: chipboard 19 mm Finish: black matt (RAL 9005) Boltless system: beams are hooked into the frames without screws, levels are height-adjustable. Fedpj Ah Unhefx Afrogi You receive an invoice with VAT shown.

Condition: ready for operation (used), Opelka Berliner fryer Donuts 12 fryers for sale with 20 racks with 18 trays each Fgodpfjxwy E Ejx Afrji

Year of construction: 2017, condition: used, functionality: fully functional, empty load weight: 1,180 kg, load capacity: 8,000 kg, construction width: 1,200 mm, Pantograph Load center: 600 Condition: Ready for use and fully functional Technical condition: very good Description: Fork carrier: 540 mm Fork carrier: 540 mm Fork carrier: 540 mm Fjdpfx Afez Ewhderogi

Year of construction: 2006, condition: used, CNC SELCA 4045 1200 X 1500 MM TURNTABLE TABLE X AXIS TRAVEL 2200 MM Y AXIS TRAVEL (VERTICAL) 1000 MM V AXIS TRAVEL (DRILLING) 1000 MM Z AXIS TRAVEL (MILLING) 360 MM W AXIS TRAVEL (APPROACH) 500 MM B AXIS ROTATION ( TABLE ) 360,000 MAXIMUM DRILLING CAPACITY 5. 40 MM MAXIMUM TAPPING CAPACITY M 30 MILLING TOOL TAPER : ISO 40 AXIS FEEDS X Y V W 0 - 10000 MM/MIN DRILLING AND MILLING SPINDLE MOTOR POWER 9 KW WEIGHT 26000 KG DRILLING ROTATION 4200 RPM Fedeq Nni Sepfx Afrsgi MILLING ROTATION 4500 RPM WORKPIECE WEIGHT IN ROTATION 12000 KG WEIGHT OF STATIONARY WORKPIECE 18000 KG MAXIMUM DIAMETER OF THE ROTATING PART DIA. 2700MM TOOL CHANGER FOR MILLING TOOLS 20 PLACES PAPER FILTRATION SYSTEM

Condition: refurbished (used), 2-spindle deep hole drilling machine under retrofit, completely overhauled, like new after conversion. Technical Data Drilling system: ELB system Number of drilling spindles: 2 Min. drilling diameter: 1 mm Max. drilling diameter: 8 mm Max. drilling depth: 300 mm Fgjdpfx Afox E U S Ejrsi Nominal workpiece diameter range: 5–30 mm

Condition: good (used), functionality: fully functional, power: 69 kW (93.81 HP), fuel type: diesel, empty load weight: 14,700 kg, Year of construction: 2008, operating hours: 4,785 h, Equipment: additional headlights, air conditioning, gripper hydraulics, hammer hydraulics, standard shovel, Track excavator TAKEUCHI TB 1140 Year of manufacture: 2008 According to the hour meter: 4,785 hours Fgedpe Ah Szhjfx Afrji 14.7 tons 69.2 kW - Powertilt with Martin M18 quick coupler - Ditch bucket 180 cm - Deep excavation bucket 110 cm - All hoses - Air conditioning - Excellent optical and technical condition - Good tracks - Well-maintained machine Selling price: €39,900 net Affordable delivery also possible!

Condition: excellent (used), Year of construction: 2001, drilling depth: 700 mm, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,600 mm, spindle speed (min.): 6,000 rpm, drill diameter: 40 mm, table length: 1,500 mm, table width: 1,250 mm, table load: 10,000 kg, Year of manufacture: 2001 Control: Heidenhain TNC 430 X: 1600 mm Y: 1200 mm Z: 1600 mm Fodpfx Ajxu Dkgofrjgi W: 500 mm Table: 1500*1250 mm, 10T B-axis, A-axis swiveling +/- 19 degrees Machine features full enclosure Chip conveyor with coolant system Tool holder: SK50 Tool changer: 20 positions

Condition: used, Year of construction: 2021, operating hours: 3,830 h, Equipment: ABS, WACKER NEUSON EZ 80 – COMPACT EXCAVATOR – AIR CONDITIONING – SWIVELING WIDE BUCKET – REARVIEW CAMERA – WELL-MAINTAINED – ----VEHICLE HISTORY * FROM FIRST OWNER * VIDEO AVAILABLE UPON REQUEST VEHICLE EQUIPMENT * TYPE: EZ 80 * 3,830 OPERATING HOURS * AIR CONDITIONING SYSTEM * SWIVELING BUCKET 1.40 M (WACKER NEUSON) * 1 X DEEP DIG BUCKET 55 CM * 1 X DEEP DIG BUCKET 28 CM * REARVIEW CAMERA * QUICK COUPLER * 8,379 KG OPERATING WEIGHT * 45 KW WITH 61 HP AND PERKINS ENGINE * IMMEDIATELY READY FOR USE EXPORT / NOTE EXPORT SALES ONLY WITH DEPOSIT MIN. 500€ – 2,000€ EXPORT SALES ONLY WITH DEPOSIT MIN. 500€ – 2,000€ EXPORT DECLARATION EXW POSSIBLE IN 10 MINUTES (AUTHORIZED EXPORTER). VEHICLE RESERVATIONS PLEASE ONLY IN WRITING. VERBAL AGREEMENTS ARE NOT BINDING. Fgsdpfx Afo Aimbtsrei CHANGES, ERRORS AND PRIOR SALE SUBJECT TO CHANGE. ? LEGAL NOTICE THIS ADVERTISEMENT DOES NOT CONSTITUTE A BINDING OFFER WITHIN THE MEANING OF SECTION 145 OF THE GERMAN CIVIL CODE (BGB) AND SERVES SOLELY TO INITIATE THE CONTRACT. ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE. NO GUARANTEED CHARACTERISTICS. SALE IS EXCLUSIVELY SUBJECT TO OUR GENERAL TERMS AND CONDITIONS.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,250 mm, workpiece length (max.): 1,450 mm, workpiece height (max.): 1,450 mm, workpiece diameter (max.): 1,450 mm, workpiece weight (max.): 2,000 kg, overall weight: 25,000 kg, spindle speed (max.): 12,000 rpm, coolant supply: 70 bar, number of slots in tool magazine: 244, Equipment: chip conveyor, documentation/manual, Horizontal Machining Center Model A99ε with Microcomputercontrol Professional 3 and integrated CNC - Control FANUC System FMS System MMC2 - L2 16 PALLETS Cross movement (X- axis) of the column 1.250mm Fgodpfj Ah Ecxex Afrji Heigth movement (Y- axis) of the spindle unit 1.100mm Distance table surface to spindle center 100 – 1.200mm Longitudinal movement (Z- axis) of the table 1.250mm Distance table center to the spindle nose 70 – 1.320mm Max. tilting height above pallets 1.450mm Admissable swing diameter in the cabin 1.450mm Pallets – Index table with 360 x 1°- degrees. position tolerance ± 3 arc sec. 2 rotation directions Max. pallet load 2.000 kg (Option: 3.000 kg) Pallet size 800 x 800 mm. Pallet surface with 5 T-slots, 22 mm H8, distance 160 mm, 2-edge locater for fixtures 400  0,01 mm. Compact design as 1 transport unit with 3-point levelling, without foundation. T-bed and machine column in Meehanite-cast iron, inherently rigid bed, bicolumn with symmetric guideways. Guideways as preloaded patched linear ball-guideways. Spindle unit 20 – 12.000 rpm, highly dynamic asynchronus three-phase motor spindle. Intensify torque in the lower speed range with winding switch and digital control. Direct input 5-characters for each speed between 20–12.000 rpm. speed override from 50 - 120 % in steps of 10 % within the selected range by M-Function eligible on and off. power 30 kW (30min) torque max. 420 Nm (25%ED) acceleration 0–6.000 min-1 1,9 s acceleration 0–12.000 min-1 7,1 s deceleration 6.000–0 min-1 1,8 s deceleration 12.000–0 min-1 4,6 s bearing diameter in the main bearing  115/175 mm. Spindle unit with Tool holder for hollow shaft according DIN 69871 AD, ISO - 50 (similar). tool clamping power 19,6 kN Temperatur control of the main motor by controlled circulating oel cooling with electrical throughput control. cooling and lubrication of the spindle bearings with an air-oel-mixture. electronic spindle alignment and positioning. direct tapping with synchronisation of the feed drive in Z-axis via pulscoder in the spindle motor. Max. speed n = 3000 rpm. Feed drive with AC-Servomotors Fabr. FANUC model alpha for X-, Y- and Z-axes, with digital control, in connecting with pre-loaded hollow shaft ball screws for the X-axes and each two ball screws for Y- and Z-axes. Rapid traverses : X-, Y-, Z-axis 50.000 mm min-1 feed rating : X-, Y-, Z-axis 1..50.000mm min-1 Standard measuring system: Tp  0,015mm (VDI DGQ 3441). Tool magazine with 244 storageplaces design chainmagazine, T-order 4-characters, free selectable. Security cover with security switch. average positioning time 9 s tool changing 1,7 s chip to chip 5 s max. tool diameter 125 mm max. tool length 600 mm max. tool weight 20 kg max. unbalance tool weight into the gripper 20 Nm with empty pockets right and left max. tool diameter 300 mm Tool holder for deep taper shafts according DIN 69871 AD, ISO-50

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden (tel. ). Atlas deep bucket F418, smooth / bucket / 1,280 mm / in stock & immediately available Price: €2,290.00 net / €2,725.10 gross - Cutting width (mm): 1,280 - Weight (kg): 500 - Capacity (liters): 1,120 Please see the attached images for the exact mounting. In our warehouse, we have a very large selection of various buckets that are immediately available! Mr. Herden (tel. ) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official Westtech sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Gierking GMT sales and service partner. We are an official Weber MT sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! Internal No.: 0011PR = Further information = New: No Intended use: Construction Fjdpfx Aj Ainr Eefregi Unladen weight: 500 kg Please contact Marius Herden for further information.

Condition: used, Year of construction: 2023, Manufacturer: Ilapak Italia S.p.A. (IMA Group) Year: 2023 Type: Complete bagging line LINE-UP 1. Belt conveyor – Service PTNMSX 2. Z-type lift with cleats – Service PTNMSX-Z 3. 14-head combination weigher – Ilapak Weightronic WA 14/50 4. Vertical form-fill-seal (VFFS) bagging machine – Ilapak Vegatronic VT2000 OF P 5. Stainless steel platform (gantry) – FQS Maximum line dimensions: 4.81 x 3.00 x 7.35 m (H) (technical data sheet) Designed for use in cold/damp environments (deep-frozen products) 1. VEGATRONIC VT2000 OF P VERTICAL BAGGING MACHINE Vertical form-fill-seal (VFFS) bagging machine, Open Frame version Forming tube and neck Vertical longitudinal seal Horizontal cross-seal jaws with integrated cutting blade Film drive via belts Bag length controlled by encoder Maximum mechanical output: 70 bags/min Film reel: Max. Ø: 600 mm Width: 400 mm Core: Ø 76 mm Max. weight: 50 kg Current format: Ø 170 mm (can be changed on request) HMI touch-screen control 2. WEIGHTRONIC WA 14/50 MULTIHEAD WEIGHING MACHINE 14 heads – 1 pre-dosing basket + 1 weighing basket per head 15 load cells: 14 weighing baskets + 1 beneath the central cone Central distribution cone Electromagnetic radial vibrating channels, which can be dismantled without tools Ouverture des paniers par moteurs pas à pas – cames paramétrables Timing hopper Unloading via 4 removable chutes into the outlet hopper Maximum speed: 90 strokes per minute Bucket capacity: 5.0 l Volume maximal de vidange (par déversement) : 12,5 l Plage de poids de vidange (par déversement) : 100 g - 3 000 g Maximum length of parts: 150 mm Modes: weighing or piece counting, mixing of up to 4 batches, multiple discharge per bag Automatic tare and calibration Ilapak HMI touchscreen Control of up to 4 external feeders Contact parts that can be removed without tools and are numbered per head AXIS F1035-E surveillance camera above the weighing machine – real-time display on the HMI (augmented reality mode) 3. PRODUCT POWER SUPPLY ( SERVICE) PTNMSX belt conveyor: - AISI 304 stainless steel frame - Modular PP belt - Effective width: 533 mm - Effective length: 2405 mm - Loading/unloading height: 3080 mm - Speed: 22 m/min - SEW SA37 gear motor – 0.37 kW – IP65 - Power supply: 400 V three-phase – 50 Hz - Wash ramp with 10 nozzles PTNMSX-Z Z-lift: - AISI 304 stainless steel structure - Modular PP belt with cleats – pitch 203.2 mm - Effective width: 403 mm - Effective length: 5,300 mm - Loading height: 2,660 mm - Unloading height: 5,215 mm - Speed: 24 m/min - SEW SA47 gear motor – 0.75 kW - Power supply: 400 V three-phase – 50 Hz - Stainless steel loading hopper - Inspection hatches Conveyor control via the bagging machine control cabinet 4. FQS GANTRY PLATFORM Stainless steel tubular structure designed for washing Weighing machine support above the bagging machine Staircase with stringers and steps made of folded sheet metal Stainless steel handrails Bolted assembly (dismantlable) DOCUMENTATION AVAILABLE Fodj Ahkz Hjpfx Afrsgi EC Declarations (production lines and machinery) Declarations of incorporation for conveyors User manuals (FR / IT) Risk assessments (FR) Electrical and pneumatic diagrams Illustrated parts lists (IPB) Recommended spare parts lists (RSPL) Food contact certificates Equipment dismantled and stored on Osertech's premises.

Condition: good (used), Year of construction: 2010, For sale CNC 5-Axis Drilling / Sinker EDM Machine – OCEAN Technologies OCT-90120CA (2010) 📝 DESCRIPTION For sale: High-precision 5-axis CNC drilling / sinker EDM machine from OCEAN Technologies Co., Ltd., model OCT-90120CA. This is a very large-capacity industrial machine, ideal for quickly drilling deep holes and machining complex cavities in the mold making, aerospace, and precision engineering industries. ⚙️ FEATURES AND TECHNICAL CAPABILITIES 📐 Travels and Machining Capabilities (5 Axes) X-axis travel: 900 mm Y-axis travel: 1,200 mm Z-axis travel (Vertical axis): 1,000 mm W-axis travel (Head guide): 350 mm Rotary axis / Dividing head (C-axis): Integrated rotary table for multi-angle positioning and machining without re-fixturing the workpiece. 🖥️ Numerical Control & System Operating system: Dedicated Windows XP Embedded. Interface: Ergonomic control panel with color screen, full industrial keyboard, speed potentiometers, and manual axis control buttons. ⚡ Electrical Specifications (Nameplate) Voltage: 400 V AC / 3 Phases / 50-60 Hz Capacity / Power: 35 KVA Overload current: 86 A Compliance: CE marking 🛠️ EQUIPMENT & INCLUDED ACCESSORIES Precision rotary table / chuck with grooves and fixing flanges. Complete filtration system and auxiliary chiller unit for dielectric fluid (RBSystem / Spracflo). Enclosed booth and protective housing with sliding doors. Fedpfxozrfpxs Afrogi Adjustable control station and manual remote control. 📊 CONDITION & HISTORY Year of manufacture: March 2010 Serial number: DR06461209 Overall condition: Good working condition, machine is clean and maintained in a controlled industrial environment. Maintenance: Regular maintenance performed.

Condition: good (used), functionality: fully functional, drilling depth: 600 mm, workpiece weight (max.): 2,000 kg, travel distance X-axis: 750 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 3,000 rpm, drill diameter: 35 mm, drill spindle length: 600 mm, spindle mount: MK 2, spindle stroke: 600 mm, number of spindles: 1, Equipment: rotational speed infinitely variable, Driling capacity: Ø 35 mm Driling depth: 600 mm X-axis: 750 mm Y-axis: 630 mm Z-axis: 300 mm Spindle speeds: 0 - 3000 rpm Fedozu Sp Repfx Afregi Tabel size: 1100 x 650 mm Load on table: 2000 kg max Turning table: 360° Controller: Degen AE30 Including: - Cabinet + pallet with drills - Coolingunit - Machine manuals Country of origin: Germany Motor power: 11,2 kVA Machine LxWxH: 350 x 120 x 175 cm Machine weight: 1300 kg

Condition: excellent (used), Deep hole drilling machine tools DEGEN - UTB MACH-ID 9188 Make: DEGEN Fedpjx Tp Ahofx Afrsgi Type: UTB Year: 2005

Condition: used, Year of construction: 2017, operating hours: 6,886 h, functionality: fully functional, Basic version DW 3060-F “Buffalo” (Carrier Machine) Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EC directive 50 mm EC towing eye incl. mounting bracket Hydraulically adjustable support leg Splash guards (inner and side mudguards) Permissible total weight 25,000 kg Tyres: 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 360 kW at 2,000 rpm, complies with EUROMOT IV emission standard Reinforced planetary gear 380 kW Additional hydraulic connection 20 l/min Hydraulic preparation for drive system Fuel tank 2 x 300 litres Rear conveyor: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic centre section Longitudinal conveyor: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24 V electrical control system Roller reverse function via electric motor when engine is at standstill Automatically reversing fan Fgsdpfxexx Tfzo Afroi Chassis with level control Acoustic start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Optional equipment: Hydraulic drive system SHREDDING SYSTEM SIZE “L” 600/4 COMPLETE Additional hydraulic connection 70 l/min Radio remote control Comb extension Size “L” Limiter Mounting for comb extension Limiter Size “L” Overband magnet for rear conveyor Frame for overband magnet Spraying system

Year of construction: 2022, condition: good (used), Product number: 0026460 Brand: De Kuiper Model: Soror Product category: Deep fryers Length: 2700 mm Width: 920 mm Height: 1800 mm Connection value (V): 400 Power (W): 47150 Year of construction: 2022 Fgodpszbmptefx Afroi Equipped with a fat filtration system. Includes 3 frying pans (1x ORE440 and 2x ORE540) and a draining tray.

Condition: good (used), functionality: fully functional, power: 30 kW (40.79 HP), fuel type: diesel, empty load weight: 4,965 kg, Year of construction: 2012, operating hours: 8,170 h, Equipment: rubber tracks, Mini excavator TAKEUCHI TB 250 Year of manufacture: 2012 According to the meter: 8,170 hours Fsdpfx Aez Iqr Iofrjgi 4,965 kg 29.6 kW - POWERTILT - Hydraulic quick coupler - All hoses - Used slope bucket - 40 cm and 80 cm deep buckets, NEW - Ready for immediate use - Original paint Selling price: €28,900 net Affordable delivery also possible!

Condition: good (used), Year of construction: 2004, Deep hole drilling machine TBT Varioflex MD 30-1, serial number 106254-11, manufactured in 2004, 70 kW, SIEMENS SINUMERIK 840D control system, tool changer, chip conveyor, paper band filter system, with extensive drilling toolset, drilling slide stroke 2,200 mm, drilling depth 1,500 mm, weight approximately 15,000 kg. Fgodpfjz Iccfex Afrji

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 106357-11, total length: 3,140 mm, total width: 1,800 mm, total height: 2,470 mm, overall weight: 3,500 kg, type of input current: AC, input voltage: 400 V, The machine was equipped with a new machine control system in 2024 and underwent a complete mechanical overhaul in 2025. The extensive overhaul involved the replacement of almost all essential components. As a result, the machine is in almost new condition technically. New control system in 2024: - SIMATIC S7-1500 PLC control system - SINAMICS S120 drive system Mechanical overhaul in 2025: - New tailstock housing, drill bush holder, and spindle housing - New workpiece support and tool support - 2x high-frequency spindles - 2x tool holders - 2x rotating collet chucks - Quill, including bearing - Ball screw drive, including bearing - Linear guides - Radial piston pump - Water cooler - 2x drilling oil supply - Flow divider - Pipelines and hoses replaced - Various filters replaced - Complete repainting Optional: - Chip conveyor can be retrofitted Oil mist extraction: - Connections are available Tool accessories: - Individual design possible according to customer requirements/customer workpiece. The deep hole drilling machine uses the single-lip drilling process. Information on the drilling unit: - Drilling diameter min/max: 1-12 mm based on ST 60 - Drilling depth: approx. 400 mm - Number of spindles: 2 - Spindle spacing: 120 mm - Spindle drive: 2 x 3.5 kW - Spindle speed, continuously variable: 1000 - 20000 1/min - Feed rate, continuously variable: 10 - 15000 mm/min - Rapid traverse: 15000 mm/min - Slide stroke (nominal): 800 mm - Center height (above table): 100 mm - Coolant supply: Deep hole drilling oil Machine frame: - Welded construction with integrated coolant tank - Top of the frame with continuous linear guide rails Spindle unit: - Motor spindles with frequency-controlled, continuously variable speed control. - Spindle head with connection for tool holder. Drill bush holder: - In cast design, fixed on the machine bed. - Holder for tool guidance system with Ø50 mm Fedpfx Ajz Irfvefrjgi - Holder for sealing housing and immersion sleeves with bayonet lock Rotating tailstock: - With drive for rotating workpiece - Clamping quills with workpiece length compensation Inspection of the machine and further information are available on request.

Condition: used, Year of construction: 2015, functionality: fully functional, This is a 100-liter electric tilting, rapid-cooking kettle from the premium manufacturer MKN, type Optima 850. After a comprehensive inspection, the unit is in flawless, good used condition, with a 6-month warranty on all electrical parts. !!! Price upon request !!! You will receive an invoice with VAT shown. Our used equipment service for you: 6-month warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs High-quality branded equipment at fair prices Professional overhaul / inspection & expert cleaning Checked & fully functional - or your money back Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 Technical data: W x D x H: approx. 1200 x 850 x 700 mm Inner kettle: Diameter 665 mm, 500 mm deep Power connection: V: 400 / kW: 21 Weight: 225 kg Serial number: 15202757 Type: 2023007S Nominal capacity: 113 liters Fgodpfe Af Itvjx Afrji Usable capacity: 100 liters Year of manufacture: 2015 Electromotive tilting device with hand switch Inner kettle: Ø 630 mm, 397 mm deep, material 1.4404 Heating time: 26 min. Power selector switch Limit switch Temperature controller Safety temperature monitor Indicator lights Tube heating element Pilot heating element Contactor Water solenoid valve Level controller with level electrode Electrical fixed connection IPX5 Fittings: Vent and bleed valve, safety valve Condition: Used, major inspection carried out, fully functional Further information: Double-jacketed kettle with separate, integrated and maintenance-free steam generation system VAPRO for rapid heating times and low energy and water consumption as well as high efficiency Short heating times thanks to the rapid steam system VAPRO - protects the food and saves time Automatic monitoring and replenishment of operating water, ensuring constant readiness for operation Standard equipment with 3 cooking levels (gentle simmering, medium and strong boiling) Thermostatic or electronic temperature control Standard with double-walled hinged lid and mixing tap The tilting angle of the kettle of more than 90 degrees makes pouring, emptying and cleaning easier Ideal kettle support prevents the pouring jet from shifting and guarantees complete emptying The large pouring height allows for problem-free emptying into larger containers All fittings and instruments are integrated into the side frame Tilting manually or electromotively Standard prepared for connection to an energy optimization system with a potential-free contact Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors Do you have any questions, would you like advice or would you like to see something on site? You can reach us by telephone during our opening hours: Monday - Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are made exclusively subject to our general terms and conditions.

Year of construction: 2026, condition: like new (used), functionality: fully functional, machine/vehicle number: E31VK2608, This is the latest generation of the Vario Cooking Center, the iVario Pro XL with a 150-liter capacity, manufactured in 08/2026 and featuring Balanced Power from the premium manufacturer Rational (successor to the VCC 311). This unit is a like-new demonstration model that was only used for cooking demonstrations. The device has a sophisticated electronic control system with various cooking processes and extremely fast heating performance, making it versatile. The unit will be supplied including plastic feet. The iVario Pro XL is available relatively soon. The full Rational factory warranty is valid until 07/2028!!! A LIMITED NUMBER OF UNITS ARE AVAILABLE. The basic equipment is not included in the price and can be purchased for an additional charge. The images shown are example images; the original photos will follow shortly. Our service for you: 24 months manufacturer's warranty from the manufacturer's date (until 07/2026) High-quality branded devices at fair prices Professional refurbishment / inspection & expert cleaning Checked & fully functional Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 Technical data: W x D x H: approx. 1365 x 894 x 1078 mm Power connection: V: 400 / kW: 34 / Hz: 50 Serial number: E31VK2608 Year of manufacture: 08/2026 Capacity: 150 liters Weight: 245 kg Condition: Well-maintained with signs of use, inspected, fully functional Special features: iCookingSuite - intelligent cooking assistant with 6 operating modes: meat, fish, vegetables and side dishes, egg dishes, milk and desserts, soups and sauces, or 5 cooking processes: boiling, frying, deep-frying, stewing and finishing iZoneControl: flexible division of the pot base into zones with different temperatures. Low-temperature cooking (also overnight), confit, sous-vide cooking. Vario Cooking Control mode: the desired result of the product is selected with a finger tap, e.g. from light to dark. Vario Boost: patented heating system for absolutely even and precise temperature transfer. Programming mode: creation of manual programs and management of cooking processes. Integrated WiFi interface, e.g. for connection to ConnectedCooking. Further information: integrated socket 230 V integrated hand shower with automatic retraction and spray dosage high-quality pot base, seamless with rounded corners core temperature sensor with 6 measuring points 1,200 programs with up to 12 steps each, programmable and nameable integrated hose shower on the unit, integrated water drain in the pot Temperature unit adjustable in °C or °F Tilting cooking pot Lid with integrated water inlet Automatic display of service messages IPX5 spray water protection USB interface for HACCP data output and updates including base cabinet with plastic feet Functions: manual mode (30°C-250°C): adjustment of liquid temperature, adjustment of pot base temperature, adjustment of oil temperature Fsdpfe Af Nliox Afrsgi automatic, liter-accurate water filling device Delta-T cooking Auto Lift: lifting and lowering device (baskets for cooking and deep-frying) The deep-frying function is locked but can be unlocked. Subject to changes and errors. You can reach us by telephone during our opening hours: Monday - Friday 09:00 - 13:00 and 14:00 - 17:00.