Used Deckel Kf 2 for sale (679)

Condition: excellent (used), Year of construction: 2008, operating hours: 2,200 h, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, Deckel Maho DMC 635 V Hardly used and in excellent condition. Operating hours: approx. 13,500 h Spindle hours: approx. 2,200 h Year of manufacture: 2008 Control: Siemens 840 D Travel: X 635 mm – Y 510 mm – Z 460 mm Table: 790 mm x 560 mm Workpiece weight: max. 600 kg Spindle taper: SK 40 Tool changer Max. spindle speed 10,000 rpm Spindle motor power 13 kW Dimensions (L x W x H): 3,500 × 4,000 × 2,600 mm Weight: 3,700 kg Control cabinet with air conditioning Video available Accessories not included, but can be purchased separately if interested. Availability: short notice Price: ex works, loaded Iedpfxsxxkffo Adnsa

Condition: repair required (used), Year of construction: 2002, operating hours: 54,981 h, functionality: not functional, machine/vehicle number: 1114 000273 3, travel distance X-axis: 1,080 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, controller manufacturer: Haidenhain, controller model: HEIDENHAIN TNC 530, total height: 2,500 mm, total length: 6,200 mm, total width: 3,802 mm, table width: 795 mm, table length: 1,500 mm, table load: 900 kg, overall weight: 9,500 kg, operating hours of spindle: 14,170 h, spindle nose: SK40, number of slots in tool magazine: 32, tool weight: 8,000 g, Equipment: chip conveyor, documentation/manual, Technical Details Machine: DMG DMU 100T Year of manufacture: 2002 Control: HEIDENHAIN TNC 530 Iedsxxamxopfx Adnea Spindle taper: SK40 Operating hours: 54,981 h Travel paths: X-axis: 1,080 mm Y-axis: 710 mm Z-axis: 710 mm Weight: approx. 9,500 kg Additional equipment: - NC rotary table (Nikken) - Large NC rotary table - Tailstock - Electronic handwheel Inspection Viewing under power is possible by prior appointment at any time. Condition: Used condition appropriate to age and previous usage. Known defects: - Ball screw of the X-axis worn / overhaul required - Y-axis likely cable or motor defect Repairs carried out: 2017 – Retrofit kit for handwheel 2022 – Replacement of screw conveyor in chip conveyor 2024 – New cylinder/linear guide for tool magazine 2024 – New monitor Further defects cannot be ruled out. Important note / disclaimer The machine is expressly sold as defective, without warranty, without guarantee, and with the exclusion of any liability for material defects. All technical details have been provided to the best of our knowledge, but are not binding. No responsibility is taken for completeness, accuracy, or timeliness of the information. The sale is made as seen and excluding any subsequent negotiation.

Condition: good (used), Year of construction: 1976, Deckel FP1 tool milling machine, fixed angular table, SK 40 spindle taper. Spindle brake, accessories: counter-support, various collets. In good, operational condition. Test under power possible by arrangement. Ijdpfx Adjxw T Efsnea

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Five-axis tool grinding machine in very good condition for sale due to lack of use! Ijdpfxexw Sxke Adnja

Condition: good (used), Year of construction: 2002, HEIDENHAIN TNC 430 control Spindle speed 20–9,000 rpm Travels X = 500, Y = 400, Z = 400 mm Iodpfx Adewglfxonea Tool holder SK 40 16-station tool changer Rotary table with B and C axes Clamping surface Ø 700 x 500 mm Max. table load 200 kg Infrared probe for workpiece measurement

Condition: good (used), functionality: fully functional, Equipment: documentation/manual, Precision Engineering Weilheim Deckel (Switzerland) Ijdoxw Npyspfx Adnea

Condition: good (used), functionality: fully functional, Universal table for DECKEL ; FP - Milling machines Ijdsxw Nnvjpfx Adnea . Dimensions : 80 x 240 cm .

Condition: reconditioned (used), Year of construction: 2001, Universal milling & drilling machine DECKEL MAHO DMU 50 M With control Heidenhain TNC 320 Year of construction: 2001 Isdpfx Aeuw Sd Iodnsa Travels: X 500 Y 400 Z 400 Speed range: 20 - 4,500 rpm infinitely variable With the following accessories: Manual swivel rotary table with digital display for C + B axis 700 mm x 500 mm clamping surface Electronic handwheel for X , Y , Z axis Splash guard cabin Machine light 4 pcs. Height-adjustable machine shoes Coolant device Operating instructions

Condition: used, x-travel 400 mm y-travel 250 mm tool taper ISO 40 turning speeds 40 - 3.150 U/min table dimensions 630 x 300 mm table load 150 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Isdpfx Asxu Nxpjdnsa Prior sale is reserved.

Condition: good (used), Year of construction: 1998, Machine is dirty Isdpfx Aovptmkodnoa Technical condition good Rotating and swivel table is mounted

Condition: excellent (used), functionality: fully functional, Equipment: chip conveyor, Universal milling machine Deckel Maho DMU 50T with TNC 426 / 430 control from Heidenhain with chip conveyor Technical data: Isdpsvyr N Sjfx Adnoa >> Year of manufacture 2000 >> Heidenhain control TNC 426 / 430 >> Travel paths X500/Y400/Z400 >> C and B axis manual with digital display >> Work spindle: Max. torque 88 Nm Max. spindle speed 20 - 9,000 rpm Tool holder SK40 >> Feed X, Y, Z -10,000 mm/min Rapid traverse X, Y, Z 12 m/min >> Tool magazine: Number of tools 16 >> Table Ø700x500mm >> Swivel range +95° /-10° >> Dimensions and weight: Dimensions 2,200 x 4,000 x 2,450 mm Weight approx. 3,500 kg >> Coolant system >> Power connection 400V kVA 17 About the machine: Offered is a Deckel Maho DMU 50T universal milling machine with a Heidenhain TNC 426/430 control in very good condition. The table can be manually (digitally) adjusted using two additional axes B and C. The machine runs smoothly and precisely. The DMU 50T has a chip conveyor. Take the opportunity to view and try out the machine on site with power on.

Condition: reconditioned (used), CNC vertical machining center "DECKEL MAHO DMC 635 eco" With path control Siemens 810 Powerline Year of construction: 2010 Travels: X 635 Y 510 Z 460 Speed range: 20 - 8,000 rpm infinitely variable With the following accessories: Rigid angled table 790 mm x 560 mm clamping surface Vertical tool changer with 20 magazine positions Iedpjuqmvkefx Adnea Electronic handwheel Heidenhain TT 140 tool length measuring system Fully protected cabin with sliding doors and interior lighting Coolant device Signal light 4 colors Chip conveyor Chip flushing gun 3 pcs. Height-adjustable machine shoes Operating instructions

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel Maho DMU 50M with line control TNC 124 from Heidenhain TOP condition !!! Technical data: Ijdpfx Aor Hbf Tednja >> Year of construction 1998 >> Heidenhain control TNC 124 >> Traverse paths X500/Y400/Z400 >> C and B axis manual with display >> Speed 20- 4500 1/min >> Feed 5000mm/min >> rapid traverse 5m/min >> Tool holder SK 40 >> Table Ø700x500mm >> swivel range +95° /-10° >> electronic handwheel >> Weight 2800Kg >> Machine dimensions approx. 4.0 m x 2.5 m height 2.6 m >> Coolant device >> Power connection 400V 32A About the machine : We are offering a Deckel Maho DMU 50M universal milling machine with a Heidenhain TNC 124 line control in very good condition. The table is manually (digitally) adjustable by two additional axes B and C. A very easy to operate control, it can enter and approach positions, deep and thread drilling, drilling patterns, hole circles, hole rows and rectangular pocket milling. Programs can be entered and read out via an interface. The Heidenhain line control makes work easier and even more precise. The milling machine was used in a large company for training purposes. Take the opportunity to inspect and try out the machine under power on site.

Condition: reconditioned (used), Year of construction: 1987, Universal toolroom milling machine DECKEL FP 1 With 3 axes active digital display Heidenhain TNC 113 Year of manufacture: 1987 Travel: X 300 Y 160 Z 340 Speed range: 40 - 2000 rpm Iodpfx Adopxm Anenea With the following accessories: Universal table 600 mm x 250 mm clamping surface Movable vertical milling head Extendable drilling spindle sleeve Stepless feed via potentiometer 1 pcs. Machine vice 1 pc. Counterholder with counterbearing 1 pc. Milling arbor long 0 22 mm Various tool holders S 22 x 2 Bellows Z axis Machine light Automatic central lubrication pump Chip collecting plate Coolant device Operating instructions THE MACHINE IS IN A VERY GOOD CONDITION !!!

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel Maho DMU 50M with line control TNC 124 from Heidenhain TOP condition !!! Technical data: >> Year of construction 1998 >> Heidenhain control TNC 124 >> Traverse paths X500/Y400/Z400 >> C and B axis manual with display >> Speed 20- 4500 1/min >> Feed 5000mm/min >> rapid traverse 5m/min >> Tool holder SK 40 >> Table Ø700x500mm >> swivel range +95° /-10° >> electronic handwheel >> Weight 2800Kg >> Machine dimensions approx. 4.0 m x 2.5 m height 2.6 m Ijdpjr Hbf Ejfx Adnea >> Coolant device >> Power connection 400V 32A About the machine : We are offering a Deckel Maho DMU 50M universal milling machine with a Heidenhain TNC 124 line control in very good condition. The table is manually (digitally) adjustable by two additional axes B and C. A very easy to operate control, it can enter and approach positions, deep and thread drilling, drilling patterns, hole circles, hole rows and rectangular pocket milling. Programs can be entered and read out via an interface. The Heidenhain line control makes work easier and even more precise. The milling machine was used in a large company for training purposes. Take the opportunity to inspect and try out the machine under power on site.

Condition: reconditioned (used), Year of construction: 1994, Universal Tool Milling Machine DECKEL FP 1 Iodpfxjw Agxrs Adnoa With 3-axis active digital readout Heidenhain TNC 123 Year of manufacture: 1994 Travel: X 300 mm, Y 160 mm, Z 340 mm Spindle speed range: 40 – 2000 rpm Comes with the following accessories: Fixed angle table, 600 mm x 250 mm clamping surface Movable vertical milling head Extendable quill Infinitely variable feed via potentiometer 1 machine vice 1 tailstock with counter bearing 1 long milling arbor Ø 22 mm, Ø 16 mm, Ø 27 mm Various tool holders S 22 x 2 Z axis bellows 1 chip guard Machine lamp Automatic central lubrication pump Coolant system Operating manual THE MACHINE IS IN EXCELLENT CONDITION! THE MACHINE COMES FROM A TRAINING WORKSHOP!

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and infinitely variable feed very good CONDITION Technical data: >> Year of construction 1990 Machine no. 2102-5046 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC113 >> Electrical central lubrication >> Coolant device >> Operating instructions, spare parts plan Isdpfx Adsu Um Erenoa Gojs3G About the machine : Universal milling machine Deckel FP1 built in 1990 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training company where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this little gem under power on site.

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis digital readout K&C New and 3-axis stepless feed Super CONDITION Technical data: >> Year of construction 1983 Machine no. 2102-2444 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital indicator K+C Newly assembled with manufacturer's warranty and operating instructions. Display unit: Reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circular functions, hole rows, radius milling functions, etc. >> Coolant device Iodpstwlwzefx Adnja >> Operating instructions, spare parts plan To the machine : We are offering a Deckel FP1 universal milling machine built in 1983 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. The FP1 was in a training workshop where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The new digital display from K&C makes work easier and even more precise. Take the opportunity to inspect and try out this little gem under power on site.

Condition: good (used), functionality: fully functional, Universal milling machine Deckel FP2 in special paint finish light gray with 3-axis digital display K+C NEW Technical data: >> Machine no. 5983 Year of construction approx. 1975 >> Rigid angular table (newly revised) >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power .:2,2 KW >> Travel X/Y/Z: 400/200/400 mm >> Equipment: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable - SK- 40 >> Tightening system S20x2 Ijdju I Rm Nopfx Adnea >> Weight approx. 1100 kg Accessories and equipment: >> 3-axis digital display K+C Newly assembled with manufacturer's warranty. Display unit: Reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circular functions, hole rows, radius milling functions, etc. >> Operating instructions for digital display >> Coolant device To the machine : We offer a universal milling machine Deckel FP2 in good condition. The Deckel has very little crank play and all spindles can be moved easily. The machine has been completely dismantled and repainted. An oil change has been carried out. Mechanically and electrically tested. The digital display from K+C makes work easier and even more accurate. You also have a 1 year guarantee on the new digital display. Take the opportunity to inspect and try out the lids on site under power. The machine is available immediately.

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP1 with 3 - axis digital readout Heidenhain original condition !!! Technical data: >> Machine no. 56560/08 Year of construction approx. 1975 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Feed 2 axes >> Drive power .:1 / 1,5 KW >> Travel X/Y/Z: 300/150/340 mm Iodou Nvxmjpfx Adnja >> Vertical quill SK40 and horizontal quill - SK40 >> S20x2 tightening system >> Weight approx. 700 kg Ecvf9Jfv9 Accessories and equipment: >> 3-axis digital display Heidenhain >> Coolant device About the machine : We offer a universal milling machine Deckel FP1 in very good original condition. The Deckel has very little crank play and all spindles can be moved easily. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more precise. Take the opportunity to inspect and try out the lids on site under power.

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis digital display K&C infinitely variable feed in light gray Super condition Technical data: >> Year of construction 1978 Machine no. 2101-0465 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Feed stepless 2 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Rapid traverse >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 700 kg Iodpfet Aav Iox Adnsa Accessories and equipment: >> 3-axis digital indicator K&C Newly assembled with manufacturer's warranty and operating instructions. Display unit: Reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circular functions, hole rows, radius milling functions, etc. >> Coolant device To the machine : We are offering a Deckel FP1 universal milling machine in very good condition. The machine has very little crank play and all spindles can be moved easily. The bellows are all new. On this newer FP1 model, the feed is infinitely variable in two axes and the machine also has a rapid traverse. An oil change has been carried out. Mechanically and electrically tested. The new digital display from K&C makes work easier and even more precise. Take the opportunity to inspect and try out this machine on site under power.

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis digital readout K&C New and 3-axis stepless feed Super CONDITION Technical data: >> Year of construction 1985 Machine no. 2102-2867 >> Turn-tilt-swivel table (newly planed) >> Speed: 40 - 2000 rpm >> feed stepless in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system M16 >> Weight approx. 800 kg Iedpst Aarpofx Adnsa Accessories and equipment: >> 3-axis digital indicator K+C Newly assembled with manufacturer's warranty and operating instructions. Display unit: Reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circular functions, hole rows, radius milling functions, etc. >> Coolant device >> Operating instructions, spare parts plan To the machine : We are offering a Deckel FP1 universal milling machine built in 1985 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. An oil change has been carried out. Mechanically and electrically tested. The new digital display from K&C makes work easier and even more precise. Take the opportunity to inspect and try out this machine under power on site.

Condition: like new (used), Year of construction: 2011, functionality: fully functional, Universal Milling Machine Deckel FP1 repowered by FPS in year of manufacture 2010 with 3-axis digital display Heidenhain ND 780. Like new!! Technical Data: >> Machine no. 2101-51084 Year of manufacture 2011 >> Fixed angle table >> Speed: 40 - 2000 rpm >> Feed on 2 axes >> Drive power: 1 / 1.5 KW >> Travel range X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill - SK40 >> Clamping system S20x2 >> Weight approx. 700 kg Accessories and equipment: >> 3-axis digital display Heidenhain ND 780 >> Hydraulic vise Iedpfx Adowpi Dqensa >> Collets >> Tool holders >> Milling cutters >> Operating manual >> Coolant device About the machine: A universal milling machine Deckel FP1 repowered by FPS is being offered in like-new condition. The accessories include a hydraulic vise with rotary table, collet tool holder, and milling cutters. Mechanically and electrically tested. The Heidenhain digital readout makes work easier and even more precise. Take the opportunity to inspect and try out the Deckel on-site under power. The machine is immediately available.

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, Universal milling machine Deckel FP1 with 3-axis digital readout RSF 2006 Overhauled TOP Technical data: >> Machine no. 53819/08 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Feed 2 axes >> Drive power .:1 / 1.5 KW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill and horizontal quill - SK40 >> Spindle brake >> Tightening system S20x2 Isdpfsvb Ud Usx Adnsa >> Weight approx. 700 kg Accessories and equipment: >> 3-axis digital display from RSF Elektronik >> Coolant device >> Machine feet To the machine : We are offering a Deckel FP1 universal milling machine in very good condition. The Deckel has very little crank play and all spindles can be moved easily. An oil change has been carried out. The FP1 was overhauled by Huttelmaier in 2006 and has been used very little since then. The digital display from RSF makes work easier and even more precise. Take the opportunity to inspect and try out this machine under power on site.

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, Equipment: documentation/manual, Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 113 Heidenhain and infinitely variable feed Super CONDITION Technical data: >> Year of construction 1984 Machine no. 2102-2601 >> Turn-tilt-swivel table >> Speed: 40 - 2000 rpm >> feed stepless in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: Dpbyzb >> 3-axis digital display Heidenhain TNC113 Iedpfx Asu Racrjdnoa >> Coolant device >> Operating instructions, spare parts plan To the machine : We are offering a Deckel FP1 universal milling machine built in 1984 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training workshop where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this machine under power on site.