Used Deckel Fp for sale (701)

Condition: good (used), Year of construction: 1987, Deckel FP4M tool milling machine with 3-axis Heidenhain digital readout, fixed table, SK 40 spindle taper. Accessories: various collets and milling arbors. Good, ready-to-operate condition. Can be demonstrated under power by arrangement. Cgedpfxoxmi I Ij Akcst

Condition: good (used), Year of construction: 1985, Deckel FP1 Aktiv with 3-axis Heidenhain digital readout, 3 active axes, rigid table, SK 40 M16 spindle taper. Central lubrication, operating manuals included. Good operational condition, comes from a vocational training center. Can be demonstrated under power by arrangement. Cjdpfoxwunzex Akcegt

Condition: good (used), functionality: fully functional, Universal milling machine Deckel FP4M Active Manufacturer: Deckel Type: FP4M Condition: used, good Digital readout: 3 - axis digital readout Heidenhain Travels: X - axis: approx. 500 mm Y - axis: approx. 400 mm Z - axis: approx. 400 mm Table clamping surface: approx. 700 x 400 mm Speed range: approx. 50 - 2500 rpm Tool holder: ISO 40 Hydraulic tool clamping Drive power: approx. 6.0 kW Feed rates & rapid feeds: in all 3 axes Feed range: approx. 8 - 630 mm/min Rapid traverse: approx. 3.0 m/min L x W x H: approx. 2300 x 1800 x 1800 mm Weight: approx. 1750 kg Machine light Spindle guard Scope of delivery: - 10x tool holders - Allmatic high-pressure vice - documentation - Spindle guard Cgodpfx Akoyub Auecet

Condition: used, Year of construction: 1989, functionality: limited functionality, machine/vehicle number: 23523, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, feed length X-axis: 400 mm, feed length Y-axis: 400 mm, feed length Z-axis: 500 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 20 kVA, controller manufacturer: DECKEL, controller model: Dialog 11, total height: 2,450 mm, total length: 2,800 mm, total width: 2,650 mm, table width: 450 mm, table length: 700 mm, table load: 500 kg, rotational speed (min.): 18 rpm, rotational speed (max.): 6,300 rpm, overall weight: 4,850 kg, spindle speed (min.): 18 rpm, spindle speed (max.): 6,300 rpm, spindle motor power: 6,000 W, number of slots in tool magazine: 26, tool length: 300 mm, tool diameter: 100 mm, tool weight: 10,000 g, input voltage: 380 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, DECKEL FP3 CC/T CNC universal milling machine in robust industrial design. This machine is ideal for precision machining tasks in toolmaking, mechanical engineering, as well as for single-part and small batch production. Equipped with the proven Dialog 11 control system (3D path control), the machine offers reliable and user-friendly operation. The working area features travel paths of 400 mm (X), 400 mm (Y), and 500 mm (Z). The spacious worktable, measuring 700 x 450 mm, allows the machining of a wide variety of workpieces with a maximum table load of approx. 500 kg. The machine is fitted with an SK40 spindle taper and stepless programmable spindle speeds from 18 to 6300 rpm. The spindle power is 6.0 kW, enabling even demanding machining operations. A tool magazine with 26 stations ensures efficient workflow. Rapid traverse speed is up to 10,000 mm/min. The machine comes with a fully enclosed safety cabinet, coolant system, and central lubrication. Technical Data (excerpt): Travel paths: X 400 mm / Y 400 mm / Z 500 mm Table size: 700 x 450 mm Table load: approx. 500 kg Spindle taper: SK 40 Spindle speed range: 18 – 6300 rpm Spindle power: 6.0 kW Tool magazine: 26 stations Cjdpfx Asyw Nv Nskcjgt Rapid traverse: 10,000 mm/min Connected load: 20 kVA Machine weight: approx. 4,850 kg Dimensions: approx. 2800 x 2650 x 2450 mm Condition: Used, limited functionality. Inspection under power possible by arrangement.

Year of construction: 1990, condition: used, Control panel Grundig for Cgsdpfsk Rqcnox Akcjt COVER FP 5 A DIALOG 11 incl. handwheel/switching element Year of manufacture 1990

Condition: used, Year of construction: 1992, machine/vehicle number: 2821-1444, See pictures for condition. More detailed information about the machine will follow shortly. Cjdpfx Akjtgkd Recegt

Condition: used, Year of construction: 1983, Technical details: Cgedpswgdz Eefx Akcst x-travel: 560 mm y-travel: 500 mm z-travel: 450 mm

Condition: like new (used), Year of construction: 1993, functionality: fully functional, Very nice Deckel Maho FP1 Cgodpfxjywlako Akcst From the latest model! Comes from a toolmaking workshop. UNIQUE MACHINE With feed on the Y-axis.

Condition: as good as new (ex-display), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 2801 002016, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 6,300 rpm, spindle speed (min.): 31 rpm, quill stroke: 80 mm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 4 m/min, rapid traverse Z-axis: 4 m/min, table width: 620 mm, table length: 390 mm, table load: 250 kg, overall weight: 1,700 kg, space requirement width: 1,800 mm, space requirement length: 1,400 mm, space requirement height: 1,800 mm, input frequency: 50 Hz, Equipment: documentation/manual, The machine is very stable and robust in its design and construction. Thanks to its good accessibility, it is extremely user-friendly. The machine can also be operated using mechanical handwheels. CNC Contouring Control DECKEL Dialog 4 Easy-to-program 3D path control with color graphic support, dialog-guided cycle input, contour calculator, editor functions, clear program and tool management, and the option for parallel programming. Travel distances X / Y / Z: 300 / 300 / 400 mm Tool holder: SK40 DIN 69872 Clamping system: Hydromechanical clamping system SK40 with pull stud according to DIN 2080 or DIN 69872 Working spindle: Vertical and horizontal. Manual quill stroke: vertical 80 mm and horizontal 65 mm. Milling head: Manually swiveling +/- 90° Speed range: 31.5–6300 rpm stepless, geometrically stepped direct gearbox for maximum torque and milling performance at the working spindle. Direct gearbox for maximum torque and milling performance at the spindle. Feed rate: 2–3600 mm/min, infinitely variable feed Cgedpfx Akjywhvhocot Rapid traverse: 4000 mm/min Angular table: 620 x 390 mm, max. load 450 kg

Condition: defective spare-parts repository (used), Year of construction: 1985, functionality: not functional, Defect: Motor short circuit Travel range X=400, Y=400, Z=340 mm Table size 700x460 mm Speed range 40 - 4000 rpm Cedpfx Aou Utyiskcogt Feed range 2 - 3600 mm/min Rapid traverse 4.0 m/min Head swivels +/- 90° Quill stroke 80 mm Spindle taper SK 40 Control Dialog 4 Total power requirement 5.5 kW Machine weight approx. 1,900 kg Space requirement approx. 2,000 x 1,400 x 1,800 mm

Condition: used, Year of construction: 1984, machine/vehicle number: 2804-1181, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, table width: 450 mm, table length: 700 mm, rotational speed (max.): 3,150 rpm, rotational speed (min.): 32 rpm, Used DECKEL tool milling machine model FP 3A CNC Cgedpfx Asyrnvvokcst Table size: 700x450mm, spindle taper SK40 DIN 2080, Travel paths: X/Y/Z = 500/400/400mm, spindle speeds from 31.5 to 3150 rpm (21 working spindle speeds), feed rate 5-1250mm/min, rapid traverse in X, Y and Z 2500mm/min, coolant system and machine feet. Year of manufacture: 1984; the machine was overhauled by Harich in 2010. The machine is located at our site in 71334 Waiblingen-Beinstein and can of course be inspected. Please contact us.

Condition: good (used), Internal article no.: 26031 Universal milling machine Deckel FP1 Infinitely variable feed Cgsdsyqx S Ejpfx Akcot + Various SK40 tool holders + Collet set (S20x2) + Hydraulic machine vice Röhm 110 The servomotor has been overhauled! Travel: X300 / Y160 / Z340 mm Quill stroke: 60 mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40-2000 rpm Tool holder: SK40 Feed: Infinitely variable 5-500 mm/min The machine is fully functional and can be inspected under power, by appointment, in a heated storage area of over 500 m².

Condition: not inspected (used), Year of construction: 1986, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, overall weight: 6,000 kg, Heidenhain TNC 426 900x700 mm universal table Cgsdpfx Ajyt Nxuokcet Travel: 850x700x600 mm Max spindle speed: 6000 rpm Weight: 6000 kg

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, Universal Milling Machine Deckel FP4M with 3-axis Heidenhain ND780 Digital Readout, special finish in light grey!!! Technical Data: >> Year of manufacture: 1986 Machine No. 2203-2126 >> Fixed angle table (newly planed) >> Spindle speed: 50 - 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head on spindle support adjustable by 150 mm >> Vertical and horizontal quill – SK40 >> Vertical quill extendable by 90 mm >> Pull stud system: M16 >> Weight approx. 1,500 kg Accessories and Features: Cedpjylmh Dsfx Akcegt >> 3-axis digital readout Heidenhain ND780 >> Coolant system >> Chip tray >> Central lubrication About the machine: Offered is a Deckel FP4M universal milling machine in very good condition. The machine has been partially overhauled, with minimal backlash and all leadscrews move smoothly and evenly. The milling machine runs quietly even at maximum speeds. Rapid traverse is available on all axes and all bellows are new. The fixed angle table has been newly scraped. A reliable and user-friendly machine. Oil change carried out. Mechanically and electrically tested. The Heidenhain digital readout makes working easier and even more precise. Take the opportunity to view and test the machine under power at our facility. For an additional charge, the machine can be supplied in CE-compliant configuration.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 2836-0192, Machine in good used condition, Dialog 11 control. Until recently, it was only rarely in operation in our own workshop. Documentation/manuals etc. are available. Additional accessories, cutters, zero point probes, etc. can be purchased optionally. Cjdpfxjylawxe Akcjgt

Condition: good (used), For sale are various Deckel FP3 milling machines, which are all in good condition. The special feature of this machine is the clamped table, which would be swiveling, rotating or even movable. Cedpfx Asiz T Exjkcsgt A purchase of the machine with a "normal" milling table is also possible. The machine has been cleaned and tested by us. If desired, safety devices can also be mounted for an additional charge. L x W x H: approx. 2000 x 1600 x 1900 mm Weight: approx. 1500 kg TECHNICAL DATA Digital display: 3 - axes - digital display travels: X - axis: approx. 500 mm Y - axis: approx. 300 mm Z - axis: approx. 380 mm spindle: Speed range: approx. 40 - 2000 rpm Tool holder: ISO 40 Drive power: approx. 3.8 kW Tool clamping: manual feeds & rapid traverses: in all 3 axes Feed range: approx. 10 - 500 mm/min Rapid feeds: approx. 1.5 m/min Prices plus VAT Viewing possible by appointment. Contact us, our team is happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website

Condition: good (used), functionality: fully functional, feed length X-axis: 300 mm, feed length Y-axis: 160 mm, feed length Z-axis: 340 mm, For sale is a conventional milling machine of the brand Deckel and type FP1 The small size of the machine makes it ideal for fast work with a small footprint The machine is fully functional Technical data: x-path 300 mm y-path 160 mm z-path 340 mm Tool holder SK40 Speed 40-2000 rpm Conventional control Table size: 600 x 210 mm Total power requirement 2 kW Machine weight approx. 0.73 t Space requirement approx. 1200x1100x1600 mm Loading and shipping throughout Europe can be organized on request. Cgjdjugv Hvspfx Akcet Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Year of construction: 1968, condition: good (used), For sale is a milling machine Deckel brand from 1968 The machine is in a good to very good condition and fully functional (No digital display but can be mounted additionally on request) Technical data: Tool holder: SK 40 Travel X/Y/Z: 400 / 200 / 400 mm speed range: 40 - 2000 rpm spindle travel vertical: 60 mm spindle travel horizontal: 100 mm feeds: 8 - 400 mm/rev table size: 700 x 330 mm motor power: 2,2 kW connection: 400 V / 16 A plug weight: approx. 1300 kg All prices plus VAT Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Cgsdpsihf Etofx Akcjt Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website

Condition: excellent (used), feed length X-axis: 400 mm, feed length Y-axis: 200 mm, feed length Z-axis: 400 mm, For sale is a conventional milling machine of the brand Deckel and type FP2 The machine is in very good condition, has been overhauled by the Harich company (date unknown) and is ready for immediate use Technical data Tool holder: SK 40 Travel X/Y/Z: 400 / 200 / 400 mm Speed range: 40 - 2000 rpm Vertical spindle travel: 60 mm Horizontal spindle travel: 100 mm Feed rates: 8 - 400 mm/rev Table size: 700 x 330 mm Motor power: 2.2 kW Connection: 400 V / 16 A plug Weight: approx. 1300 kg Vice and tools are NOT included in the offer, but can be offered. On request, transportation and loading can be organized for an extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale Cgodpsu Ti Akjfx Akcet PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: good (used), For sale is a Deckel FP2 with high-speed milling head (V-belt drive with gear ratio) Cjdolz R Iwopfx Akcjgt The machine was only used for copper & graphite processing, so it is not subjected to heavy use The machine is ready for use and fully functional A digital display can be retrofitted for an additional charge. The machine can also be sold without a milling head. Partial device NOT included Accessories available for an additional charge Tool holder: SK 40 Travel paths X/Y/Z: 400 / 200 / 400 mm Speed range: 40 - 2000 rpm Vertical spindle travel: 60 mm Horizontal spindle travel: 100 mm Feed rates: 8 - 400 mm/rev Table size: 700 x 330 mm Motor power: 2.2 kW Connection: 400 V / 16 A plug Weight: approx. 1300 kg All prices plus VAT Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit us on our website

Condition: used, Year of construction: 1985, functionality: fully functional, table length: 680 mm, table width: 380 mm, table height: 345 mm, For sale is a Deckel milling table, which was installed on an FP2 milling machine. The angle and rotation functions are fully functional, unfortunately there is no longer a crank. Signs of use on surface recognizable on pictures Dimensions: 38*68 cm Csdpfx Akeuuh Suocjgt Height: 25 cm

Condition: reconditioned (used), Year of construction: 1991, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, feed rate X-axis: 3,600 m/min, feed rate Y-axis: 3,600 m/min, feed rate Z-axis: 3,600 m/min, quill stroke: 80 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 40 rpm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 4 m/min, rapid traverse Z-axis: 4 m/min, table length: 530 mm, table width: 900 mm, rotational speed (max.): 4,000 rpm, rotational speed (min.): 40 rpm, table load: 450 kg, Equipment: rotational speed infinitely variable, The machine is designed and built to be very stable and robust. Thanks to its excellent accessibility, it is extremely user-friendly. The machine can also be moved manually using mechanical handwheels. CNC Path Control DECKEL Dialog 11 Easily programmable 3D path control with color graphic support, dialogue guidance for cycle input, contour path calculator, editor functions, clear program and tool management, and the possibility of parallel programming. Travel paths X / Y / Z: 560 / 500 / 450 mm Tool holder: SK40 DIN 69872 Clamping system: Hydromechanical clamping system SK40 with drawbar according to DIN 2080 or DIN 69872 Cgsdpfjyn Dq Iex Akcjt Working spindle: Vertical and horizontal. Manually retractable quill in vertical direction 80 mm. Milling head: Manually swivels +/- 90° Speed range: 40–4000 rpm, geometrically stepped Direct-drive gearbox for maximum torque / milling performance at the working spindle Feed rate: 2–3600 mm/min, infinitely variable feed Rapid traverse: 4000 mm/min Angle table: 530 x 900 mm, max. load capacity 450 kg

Condition: ready for operation (used), Working travels 300x150x340mm Universal table 600x260mm Spindle taper 40 Spindle speeds 40-2000 rpm Digital read-out Misc.accessories Cgedpfedr E Apjx Akcet MARCELS MASCHINEN CH

Condition: good (used), Deckel CNC tool milling machine Control Dimensions & weight: Weight: approx. 1.3 t - 1.5 t. Dimensions: approx. L x W x H 1.5 m x 1.5 m x 1.6 m The machine is equipped with mechanical handwheels for manual operation in addition to CNC control Control: DECKEL Dialog 4 (6004 50 004602 02) Training machine Codpfx Aksynf E Tocegt The data was read from the machine, therefore given without guarantee

Condition: excellent (used), Year of construction: 2002, Control: 3-axis active path control, Heidenhain TNC 123 Spindle speed: 40 - 2000 rpm, geometrically stepped direct drive with 16 gear stages for maximum torque / milling performance Feed rate: 5 to 500 mm/min, infinitely variable Rapid traverse: 1.2 m/min Quill: Extendable vertical quill, 60 mm, SK40 M16 draw thread Cgjdpsyg I Nfefx Akcjt Axes X/Y/Z: 300/160/340 mm Swivel table: 600 x 210 mm, max. load 200 kg