Used Dc Servo Controller for sale (49,156)

Condition: used, Weiss Type: WK11 - 600/70/5 Weiss Climate Chamber, Water-Cooled The Weiss climate chamber WK11-600/70/5, with an approximate usable volume of 600 liters, is suitable for temperature and humidity testing as well as for conditioning samples and materials in the range of -70 °C to +180 °C. Simcon/32 - Net Controller Technical Data: Test chamber designation: WK11-600/70/5 External dimensions with hinges and door closure: Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door closure: Height 1995 mm, Width 1000 mm, Depth 800 mm Internal dimensions: Height 950 mm, Width 800 mm, Depth 800 mm Connections: 2x R1 NW 125 mm ∅ 1x L1 NW 50 mm ∅ Test chamber volume: approx. 600 liters Data for temperature tests: Temperature range -70 °C to 180 °C Temporal temperature deviations in the center of the usable space: ± 0.1 to ± 0.5 K Spatial temperature deviations: ± 0.5 to ± 2 K Temperature gradient: 1 to 4 K Temperature change rate: Heating: 6 K/min Cooling: 6 K/min Thermal compensation: at +20 °C: 5000 W at -20 °C: 5000 W Data for climate tests: Temperature range +10 to +95 °C Humidity range 10 to 98 % RH Temporal temperature deviations in the center of the usable space: ± 0.1 to ± 0.3 K Spatial temperature deviations: ± 0.5 to ± 1 K Temperature gradient: 1 to 2 K Temporal humidity fluctuation in the center of the usable space: ± 1 to ± 3 % RH Thermal compensation: 500 W 3/N/PE AC 400V ±10% 50Hz Rated power: 16.5 kW Rated current: 29 A Fuse on customer side: 32 A slow-blow Permissible weight of test specimen: Total load of the shelf supports: 80 kg Test chamber floor: 80 kg, insert shelf: 40 kg Weight: 675 kg Refrigerant: R452A / R23 Important note: "The table shown in the photos is not included in the sale." For your safety as a buyer, please note the following information! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate Fpsdpfxezimg Hs Ah Esp 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Stäubli Type: TX90L robot / CS8C controller Six-axis robot with controller For sale: a Stäubli TX90L 6-axis industrial robot including CS8C controller and original teach pendant. The robot is suitable for pick & place, assembly, handling, machine loading, as well as automation, testing and training applications. Programming via VAL3. Technical data – Robot Type: TX90L Axes: 6 Payload: 5–6 kg nominal, up to 15 kg temporarily Reach: approx. 1,200 mm Repeatability: ±0.035 mm Wrist protection rating: IP65 (IP67) Mounting: Floor / Wall / Ceiling Robot weight: approx. 113 kg Technical data – Controller Controller: Stäubli CS8C Software: VAL3 s6.7.1 Programming language: VAL3, PLC IEC 61131-3 Interfaces: Ethernet, fieldbus, digital I/O, serial interfaces Fsdpfx Ahjzix Uco Eepp Power supply: 3 × 400 V, 50/60 Hz Power consumption: approx. 2000 VA Protection rating: IP20 Controller weight: approx. 50 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) Stäubli TX90L robot arm CS8C controller Original teach pendant Connection cable (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by phone.

Condition: used, Stäubli Type: TX90XL robot / CS8C controller Six-axis robot with controller For sale is a Stäubli TX90XL 6-axis industrial robot, including a CS8C controller and the original teach pendant. The TX90XL is suitable for pick & place, assembly, machine loading, part handling, as well as automation, testing and training applications. The XL version offers a large reach for flexible applications. Programming is done via VAL3. Technical data – Robot: Fjdpfjzix Uijx Ah Espp Type: TX90XL Axes: 6 Payload: 4 kg Reach: approx. 1,400 mm Repeatability: ±0.035 mm Protection class, wrist: IP65 / IP67 Mounting: Floor / Wall / Ceiling Weight: approx. 115 kg Technical data – Controller: Controller: Stäubli CS8C Software: VAL3 Programming languages: VAL3, PLC IEC 61131-3 Interfaces: Ethernet, fieldbus, digital I/O, serial interfaces Supply: 3 × 400 V, 50/60 Hz Power consumption: approx. 2000 VA Protection class: IP20 Weight, controller: approx. 50 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) Stäubli TX90L robot arm CS8C controller Original teach pendant Connection cable (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, GE Druck Modular High-Precision Pressure Controller / Pneumatic Pressure Controller PACE5000 Professional High-Precision Pressure Controller for calibration, pressure testing, automation, and laboratory applications For sale is a used high-precision pressure controller from the manufacturer GE Druck. The PACE5000 is a modular, high-precision pressure control system designed for the most demanding applications in calibration laboratories, research, development, production, and quality assurance. Due to its high control speed and precision, the device is ideally suited for automatic pressure tests, calibration tasks, and industrial measuring and testing systems. Technical data: Manufacturer: GE Druck (Baker Hughes) Model: PACE5000 Device type: Modular High-Precision Pressure Controller Pneumatic Control Module: CM0-B-16G Dimensions: approx. 440 × 88 × 320 mm (W × H × D) Weight: approx. 10.1 kg Control range: -1 to 70 bar(g) Maximum permissible operating pressure (MWP): 94 bar Accuracy: up to 0.001% of the final value (model-dependent) Long-term stability up to 0.001% FV Features: Modular control system Very high pressure control speed Automatic pressure control Pressure testing Leak test function Burst test Switch test Programmable test sequences User-defined pressure units Display: Color touch display Graphical user interface Display of setpoint and actual value Intuitive menu navigation Interfaces: Ethernet USB Host Fpsdpfx Ajziyqrjh Ejp USB Device RS-232 CAN IEEE-488 (GPIB) 24 V DC inputs/outputs Pneumatic connections: Supply Output Vent Reference G1/8" connection Power connection: 100–230 VAC 50–60 Hz Power consumption: max. 100 VA Application areas: Calibration laboratory Testing systems Quality assurance Automotive industry Aerospace Mechanical engineering Measurement technology Research & Development Automation technology Pressure sensor calibration Equipment: Color display Pneumatic Control Module Ethernet USB RS232 CAN IEEE-488 (GPIB) Pressure connections Power cable Accessories as shown in the pictures Scope of delivery: GE Druck PACE5000 Power cable Accessories as shown in the pictures Weight: approx. 10.1 kg Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age are present. The table shown in the photos and any other items not explicitly mentioned are not included in the sale. Shipping via parcel service or freight forwarder is possible. Subject to changes, errors, and prior sale. We will be happy to answer any further questions by telephone or e-mail.

Condition: used, Weiss   Type: WK3 600/0-M   Weiss Climate Test Chamber, Water-Cooled Type series WK3-../0 with SIMPAC* control system   Test chamber volume: approx. 600 liters   Test chamber dimensions: Height 950 mm, Width 800 mm, Depth 800 mm External dimensions: Height 1995 mm, Width 1090 mm, Depth 1660 mm   Data for operation:   Test chamber lighting: LED 24 V, 6.8 W / Halogen bulb 2 x 24V, 50W Rated voltage: 1/N / PE AC 230 V ±10% 50 Hz Rated power: 2.3 kW Rated current: 10 A Fuse (on customer's side): 16 A, slow-blow Protection class, control cabinet and operating panel: IP 54 Max. heat dissipation to environment: 1200 W   Sound pressure level approx. measured at a distance of 1 m from the front, 1.6 m high: 46 dB(A)   Data for temperature tests: Temperature range: -5°C to +90°C   Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K Temperature deviation spatially: ± 0.5 to ± 1 K   Temperature gradient (according to IEC 60068-3-5) Temperature change rate Heating: 0.6 K/min Cooling: 0.3 K/min   Heat compensation at +20 °C to +50 °C: 200 W   Data for climate tests:   Temperature range: +10°C to +90°C Fpodpfeziywrsx Ah Esp Dew point range: 4 to +89.5 °C Humidity range: 10 to 98 % RH Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.3 K Temperature deviation spatially: ± 0.5 to ± 1 K Humidity deviation over time: +1 to +3 % RH   Refrigerant: R-404A   Weight: 610 kg   For your security as a buyer, please note the following information!   The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers will be subjected to a test run, which will be monitored with calibrated equipment.   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data are subject to change!)   We will gladly answer any further questions you may have by telephone.

Condition: used, STÄUBLI SCARA industrial robot with CS9 controller TS2-40 4-axis SCARA robot for highly precise pick & place, assembly, and automation tasks For sale is a used SCARA industrial robot from the manufacturer Stäubli, including a CS9 controller and an SP2 teach pendant. The robot system is ideally suited for fast pick & place applications, assembly, packaging, handling, as well as laboratory and automation tasks. The complete system, including controller, teach pendant, robot connection cable, and other accessories, will be delivered as shown in the pictures. Technical data: Manufacturer: Stäubli Faverges SCA, France Model: TS2-40 Robot type: SCARA, 4 axes Year of robot manufacture: 02/2024 Year of controller manufacture: 02/2024 Controller: CS9-TS2-40 Teach pendant: SP2 Reach: 460 mm Rated payload: 2.4 kg Max. payload: 8.4 kg Robot weight: 38 kg Controller weight: 30 kg Repeatability XY: ±0.01 mm Repeatability Z: ±0.004 mm Repeatability Rz: ±0.002° Controller: Stäubli CS9-TS2-40 rack controller SP2 teach pendant VAL 3 activated PROFINET Device Ethernet interface Programmable robot controller Connections: Controller power supply: 1 × 230 VAC, 50/60 Hz Fsdpfx Ajzlry Roh Ejpp Power consumption: 1700 VA PROFINET Device Ethernet Digital input/output Pneumatic connections on the robot Equipment: Stäubli TS2-40 SCARA robot CS9-TS2-40 controller SP2 teach pendant Original robot connection cable End-of-arm tooling mounting installed VAL 3 programming system Accessories as shown in the pictures Application areas: Pick & Place Assembly automation Electronics manufacturing Laboratory automation Packaging automation Machine loading Quality assurance Industry 4.0 applications Scope of delivery: Stäubli TS2-40 SCARA robot CS9-TS2-40 controller SP2 teach pendant Original robot connection cable End-of-arm tooling Accessories as shown in the pictures Condition: Used Year of manufacture 2024. Optical condition as shown in the pictures. System start and information menus tested. Robot system including controller and teach pendant. The table or any other items not explicitly mentioned in the photos are not included in the sale. Shipping via freight forwarder is possible. Subject to changes, errors, and prior sale. We will be happy to answer any further questions by telephone or email.

Condition: ready for operation (used), Fanuc A06B-0123-B177 AC servo motor, serial number: C973C6232, used, in good condition, 100% functional. Scope of delivery as shown in the photos. Fpsdpfj Adx E Iex Ah Eop

Condition: ready for operation (used), Fanuc A06B-0313-B002 AC servo motor, serial number C899C0394, used, in good condition, 100% functional, scope of supply as shown in the photos. Fjde Adx Hlspfx Ah Eepp

Condition: good (used), mileage: 53,868 km, power: 70 kW (95.17 HP), first registration: 09/2023, fuel type: diesel, tire size: 185/65R15, axle configuration: 4x2, wheelbase: 2,800 mm, fuel: diesel, color: black, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 2, total length: 4,350 mm, total width: 1,650 mm, total height: 1,770 mm, loading space length: 11,700 mm, loading space width: 1,360 mm, loading space height: 1,180 mm, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, power mirror, traction control, = Additional options and accessories = - Halogen lamp - None - Leather / Fabric - Manual - Radio/Cassette - Rear view camera - Blind spot sensor - Partition = Notes = Configuration: 4x2, Tare weight: 1376 kg, Gross vehicle weight: 2002 kg, Cab type: Single cab, Cruise control, Air conditioning, Number of airbags: 1, Parking assistance: Front and rear, Electric windows, Electric mirrors, Partition, Radio/Cassette, Carplay, Color: Black, Metallic, Rear view camera, Lighting type: Halogen lamp, Bluetooth, Blind spot sensor, Engine power: 70 kW (94 hp), Number of cylinders: 4, Displacement: 1461 cc, Fuel: Diesel, Euro: 6, Drive technology: Timing belt, Transmission type: Manual, Gears: 6, Power steering, ABS, ASR, Starter battery, Body type: Standard, Side panels, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Number of seats: 2, Seat arrangement: 1+1, Seat cover: Leather / Fabric, Seat adjustment: Manual, ac carplay EURO6 pdc half leather camera cruise control 53,000 km, Tire type: Summer tires = Further information = General information Number of doors: 1 License plate: KLEYN1 Fsdj Adztnepfx Ah Eepp Axle configuration Tire size: 185/65R15 Suspension: Coil spring suspension Axle 1: Tire tread left: 6 mm; Tire tread right: 5 mm; Brakes: Disc brakes Axle 2: Tire tread left: 6 mm; Tire tread right: 6 mm; Brakes: Drum brakes Weights Tare weight: 1,376 kg Payload: 626 kg GVW: 2,002 kg Functional Loading area height: 57 cm Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1 Financial information Leasing price: €245 per month (delivery van, 72 months); Ask for more information and conditions.

Condition: used, machine/vehicle number: 0926292, Year of construction: 2009, Temperature control unit manufactured by Single, used and untested. The device is intended for applications in tool temperature control, injection molding, and industrial process engineering. It operates as a single-circuit system with an SBC control system. The medium used is water*; the maximum flow temperature is 30 °C. Heating output is not specified; pump performance is 28 l/min at 3.2 bar*. Year of manufacture is 2009, and the total weight is 105 kg. Fpjdpfjy Su D Usx Ah Ejp

Condition: used, Year of construction: 2009, machine/vehicle number: 090924, Temperature control unit manufactured by Single, used and untested. The device is intended for applications in tool temperature control, injection molding, and industrial process engineering. It operates as a single-circuit system with an SBC control system. The medium used is water*; the maximum flow temperature is 30 °C. Heating output is not specified; pump performance is 28 l/min at 3.2 bar*. Year of manufacture is 2009, and the total weight is 105 kg. Fpodpfx Ahsy Su Efo Ejp

Condition: used, Laserline Type: LPC03 Lascon laser system with Lascon controller LPC03 Laserline diode laser The diode laser ›LDM 500-60‹ has a wavelength of 935 nanometers and an output power of 550 watts. Laser type: LDM 500-60 Wavelength of 935 nanometers +/- 10% Laser power: 550 W Supply voltage 100-264V +/- 10% Max. power consumption 1.7 kW Fpedozdqkrepfx Ah Eop Frequency 1 phase 47-63 Hz Laser class 1 Type: LDM 500-60 Lascon controller LPC03 The LPC03 has the processing power of a complete PC in a very small space. Instead of a hard drive, a removable flash disk has been installed. Due to the elimination of the hard drive and the extremely low heat generation, the LPC03 is therefore ideally suited for tasks in the field of measurement, control and regulation in an industrial environment. The fiber-coupled MA pyrometers QP004 and EP004 can be easily integrated into the device. The fiber optic cable is then simply connected to the rear panel. The housing also provides space for the PCI card PCI-1P. In conjunction with the LASCON measurement and control system, the operating system and software are installed on the flash disk. Technical data: Motherboard: Half Size CPU card Slots: 1 x PCI, length max. 180 mm Drives: none Storage medium: removable flash disk Connections: USB front; Ethernet, RS232, VGA, keypad, mouse, USB rear Housing: 212 mm x 80 mm x 250 mm (height x width x depth) Protection class: Front: IP40 Environment: 15°C - 40°C Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Mitsubishi Type: Mitsubishi Melfa RV-3SDB-S15 Mitsubishi Industrial 6-Axis Articulated Arm Robot The RV-3SDB articulated arm robot The RV-3SB robot is specifically designed for handling up to 3.5 kg. The enclosure, which meets the IP 65 standard, ensures operation under extreme conditions. Special Features: • Adjustment of axis compliance for workpiece tolerance compensation • Conveyor tracking • Sensorless collision detection • Encapsulated design • Adaptive speed optimization Feature/Function Degrees of Freedom (Number of Axes) 6 Design: Standard (Oil Mist) Mounting: Floor, wall or ceiling mounting possible (wall mounting with limitations in the J1 axis) Construction: Vertical articulated arm Drive System: AC servo (all axes with brake) Position Detection: Absolute encoder Range of Motion: Degrees Body (J1) 340 (−170 to +170) Shoulder (J2) 225 (−90 to +135) Elbow (J3) 191 (−20 to +171) Forearm Rotation (J4) 320 (−160 to +160) Wrist Bend (J5) 240 (−120 to +120) Wrist Rotation (J6) 720 (−360 to +360) Movement Speed: Degrees/s Body (J1) 250 Shoulder (J2) 187 Elbow (J3) 250 Forearm Rotation (J4) 412 Wrist Bend (J5) 412 Wrist Rotation (J6) 660 Resultant Maximum Speed 5500 mm/s Lifting Force Nominal value 3kg Maximum value 3.5kg Reach Radius (to the pivot point of the J5 axis) 642mm Weight: 37kg Robot Controller: CR1DA-721-S15 (230V) Teachbox: R46TB with color/touch display Technical Data: Dimensions (W × H × D) 252 × 240 × 114 mm Weight 1.250 kg Connection Type: Connection to the robot controller with a circular connector, cable length 7 m Interfaces: RS422 For connection to the robot controller Fjdpfjzdiukox Ah Eepp Display/Screen: Touch-sensitive 6.5" TFT monitor with backlight and 640 × 480 pixel resolution, the touchscreen can be operated with fingers or a stylus. Condition: used Scope of Delivery: (See image) (Subject to changes and errors in the technical data, information provided!) We will gladly answer any further questions you may have by phone.

Condition: new, SEW Type: KA106/A Bevel gear unit External cooling and DC brake Approx. 715 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) Fodpfx Ajzdrx Doh Eepp We will be happy to answer any further questions you may have over the phone.

Condition: used, Stäubli Type: Robot TX90L / Controller CS8C Six-axis robot with controller The high-performance robots of the TX90 series, designed for medium payloads, offer maximum flexibility for a wide range of applications due to their compact and streamlined design. Thanks to the three mounting options – floor, wall, and ceiling – the six-axis robots are easy to integrate. The fully encapsulated design (IP 65) allows for use in cleanrooms or under harsh environmental conditions. Features Fully encapsulated design with internal supply lines Rigid structure Multiple mounting options Patented Stäubli JCM gearbox modules Large reach Advantages Perfect protection of the components. Standard version for cleanroom class ISO 5. Easy to clean. Excellent dynamic path behavior High flexibility Precision, dynamics, and speed with reduced maintenance Optimal use of the workspace Technical Data TYPE TX90L Number of degrees of freedom 6 Nominal payload 6 kg Maximum payload 15 kg Reach 1200 mm Repeatability ±0.035 mm Protection class (wrist) IP65 (IP67) Mounting options Floor / Wall / Ceiling Controller Stäubli CS8 CS8C Features Ethernet, fieldbus, digital inputs and outputs, serial interfaces Easy to integrate, 19-inch rack-mount version, protection class IP20 All connections on the front Proven digital technology Fpsdpfxszh U Sbs Ah Eep Advantages Open architecture Compact Good accessibility Reliable Technical Data: Type CS8C Dimensions (H x W x D) 331 x 445 x 455 mm 481 x 445 x 455 mm Protection class IP20 (IP54 optional) Working memory 64 MB RAM (min.) Storage capacity 128 MB (min.) Flash disk and USB port System/programming language VAL 3 (multitasking interpreter language), PLC-IEC 61131-3 language Communication Serial interface RS232/422, Ethernet, ModBus/TCP server Type: Robot TX90L / Controller CS8C Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2021, operating hours: 2,600 h, ABB IRB4600-45/2.05 robot and IRC5 controller-TPU-RW6.X DEVELOPMENT OF GSG ROBOTICS Fpedsz Tab Djpfx Ah Eop GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015, serving a large area for robot maintenance and repair. Over the years, we have developed into a comprehensive partner for all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc.

Condition: new, Dosing and weighing controller for precise regulation of raw material flow in the woodworking and chemical industries. Thanks to its ATEX22 certification, this microcomputer is specially protected and safe to use in environments where there is a fire or explosion hazard due to combustible dust. Fpjdpfx Aho Afdt Tj Eep

Condition: used, Year of construction: 2011, Bar loader Manufacturer: LNS Type: Quick Load Servo 2 Year of manufacture: 2011 Fsdpe Aaq Uaefx Ah Espp Condition: Used Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale!

Condition: used, Year of construction: 2013, Manufacturer: Vulcanic Model: Vulcatherm Reference : 838447-01 Year : 2013 Type: Temperature controller Condition: new (decommissioned), never put into production. Fpedpfx Ae Afp Uvsh Eop Heat transfer fluid: demineralised water, liquid phase, group 2 Maximum permissible pressure (PP): 10 bar Heating capacity: 40 kW Temperature: max 90°C / min 10°C Power supply: 400 V, 75 A Weight: approximately 200 kg  

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 0166, spindle bore: 105 mm, quill stroke: 300 mm, spindle speed (min.): 26 rpm, spindle speed (max.): 2,000 rpm, total length: 4,700 mm, total width: 2,260 mm, total height: 2,260 mm, type of input current: AC, overall weight: 4,800 kg, distance between centers: 2,000 mm, number of tool stations in tool turret 3: 8, Cycle-controlled turning machine with Fagor 8055i control Model: UT 660x2000 Turning diameter over bed 660 mm Turning diameter over carriage 460 mm Turning diameter in the bed bridge 960 mm Distance between centers 2000 mm Maximum turning length 1650 mm Headstock Spindle bore 105 mm Spindle head Camlock D1-11 DIN 55029 Spindle taper MK8 with reducing sleeve MK6 Spindle speeds (3 ranges, stepless) Low 26 – 224 rpm Medium 225 – 670 rpm High 671 – 2000 rpm Drive nN = 1500 rpm / NN = 96 Nm / IN = 34 A (50 Hz) Tailstock Quill stroke 300 mm Quill diameter 105 mm Taper quill MK6 Saddle Longitudinal travel (Z-axis) 1700 mm Z – Rapid traverse 6 m/min Z – Feed rate 1 – 3000 mm/min Z – Drive nN = 3000 rpm / NN = 14.5 Nm / IN = 8.5 A (50 Hz) X – Rapid traverse 6 m/min X – Feed rate 0.5 – 3000 mm/min X – Drive nN = 3000 rpm / NN = 6.0 Nm / IN = 4 A (50 Hz) Turret (8 tool stations) Tool holder VDI (8x) Coolant pump Coolant pump tank volume = 115 l Lubrication unit Pump (lubrication for Z+X saddles) Tank volume = 2 l Machine bed Machine bed width 480 mm Max. turning length 1650 mm Power 39.3 A Power 24 kW Mechanical data Overall length 4700 mm Overall width 2250 mm Overall height 2260 mm Net weight 4800 kg Gross weight 5500 kg Fodpj Agcnnefx Ah Eopp All of the above technical data are for reference only. Control type CNC Condition Used Year of manufacture 2013 Machine is powered Yes Weight 4800 kg Width 4.7 m Height 2.26 m Depth 2.25 m This offer is exclusively aimed at entrepreneurs within the meaning of § 14 BGB. No returns on used goods! No warranty.

Year of construction: 2004, condition: used, 2 units of PC-controlled tool dispensing cabinets, networked together. Spiral dispensing: 126 spiral slots, max. 63 per cabinet 2520 product capacity, max. 1260 per cabinet Electrical connection 230 V / 50 Hz, 16 A Dimensions L x W x H 990 x 980 x 1830 mm per cabinet Weight approx. 475 kg per cabinet Accessories / Special features: Fsdpedt El Hefx Ah Eopp Ideal storage system for non-sensitive items with compact dimensions. A compact, stable outer packaging for each individual part is required. These parts fall into a cushioned dispensing chute. - Operation via large touchscreen - Hand scanner - Documentation New price: approx. 21,000.00 EUR net Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 1990, functionality: fully functional, turning length: 2,000 mm, turning diameter: 1,000 mm, spindle bore: 104 mm, overall weight: 11,000 kg, CNC Lathe: SCNC 1000 DC x 2000 Year of manufacture: 1990 Control system: Fanuc O-TF Maximum swing over bed: Ø 1000 mm Fpsdo Agcwajpfx Ah Eop Distance between centers: 2000 mm Spindle bore: Ø 104 mm Machine weight: 11000 kg. Loading into a container or onto a truck is possible.

Condition: used, Synchronous servo motor with holding brake and gearbox, gear motor, electric motor, bevel gearbox motor Motor: Manufacturer: LUST LTI DRIVES Type: LSK-190-4-30-560 T1,P,KK,1R Order No.: 716090 Art. No.: 0970.8015 Machine type: Permanent magnet synchronous servo motor Intermediate circuit voltage of the controller Uzk: 560 VDC Rated power: 12.13 kW Rated speed: 3000 rpm Rated torque Mn: 38.6 Nm Stall torque M0: 61.5 Nm Rated current In: 26.6 A Stall current I0 / I0max: 41 / 164 A Pole pairs: 3 Shaft diameter: 32 mm Shaft length: 50 mm - Shaft end with key and keyway DIN 6885 / A10x8x50 Fpodef Dlzqjpfx Ah Eop - Option 1R Resolver, 1 pole pair - Option KK Terminal box - Option T1 (DIN-PTC double basic insulation) - Power connection, 8-pole connection box - Resolver connection, 12-pole connection box Holding brake: Manufacturer: LUST LTI DRIVES Type: NFH10-H/BA Order No.: 717173 Art. No.: 228-00043 Rated voltage: 24 VDC Rated current: 4.5 A Rated power: 108 W Braking torque: 160 Nm Bevel gearbox WESTFALIA Systemtechnik Shaft end output: Ø 60 mm with key Shaft end length: approx. 120 mm Gearbox output speed: max 450 rpm Gearbox input speed: max 4500 rpm Gear ratio: 10:1 - Gearbox can be mounted on two flange surfaces - Mounting hole on the gearbox 180 x 180 mm / 180 x 230 mm - Gearbox with triple chain sprocket, outer diameter: 147 mm, number of teeth: 17 Overall dimensions L x W x H: 1020 x 250 x 350 mm Total weight: 175 kg good condition 2 units available, price per unit.

Condition: used, Synchronous servomotor with holding brake and gearbox, Gear motor, electric motor, right-angle gear motor Motor: Manufacturer: LUST LTI DRIVES Type: LSK-190-7-30-560 T1,P,KK,1R Order No.: 716090 Art. No.: 0970.8016 Machine type: Permanent magnet synchronous servomotor Intermediate circuit voltage of the controller Uzk: 560 VDC Rated power: 14.51 kW Rated speed: 3000 rpm Rated torque Mn: 46.2 Nm Stall torque M0: 83.4 Nm Rated current In: 31.5 A Stall current I0 / I0max: 54.9 / 219.6 A Pole pairs: 3 Shaft diameter: 32 mm Shaft length: 50 mm - Shaft with key and keyway DIN 6885 / A10x8x50 - Option 1R Resolver, single pole pair - Option KK Terminal box - Option T1 (DIN-PTC double basic insulation) - Power connection, 8-pole terminal box - Resolver connection, 12-pole terminal box Holding brake: Manufacturer: LUST LTI DRIVES Type: NFH10-H/BA Order No.: 718690 Art. No.: Rated voltage: 24 VDC Rated current: 4.5 A Rated power: 108 W Braking torque: 65 Nm Right-angle gearbox WESTFALIA Systemtechnik Hollow shaft output: inner Ø 65 mm Hollow shaft length: approx. 280 mm Gearbox output speed: max 450 rpm Gearbox input speed: max 4500 rpm Gear ratio: 10:1 - Shaft also ground on the outside - Gearbox can be mounted on two flange surfaces - Mounting holes on the gearbox 180 x 180 mm / 180 x 230 mm Fpjdpfxef Dlzue Ah Esp Overall dimensions L x W x H: 1110 x 250 x 350 mm Total weight: 180 kg Good condition

Condition: good (used), Year of construction: 1986, DC motor, servo motor, gear motor, electric motor, direct current gear motor -Speed: 30-3000 rpm -Power: 0.07-7.5 KW -Construction: B5 -Diameter shaft: Ø 50 mm -Protection class: IP 44 -Number: 1x motors available Fsdpfx Aheb R Ua Ue Ejpp -Price: per piece -Dimensions: 1160/370/H530 mm -Weight: 222 kg