Used Darex Sp 2500 for sale (12,602)

Condition: used, tank capacity: 2,500 l, GENERAL Equipment: Butterfly valve Design: oval Remarks: 1 manhole in the front end; Tank 1 equipped with stacking device (can be used to stack Tank 2, which does not have a stacking device); Both vessels were professionally cleaned and overhauled in 2024; Brand new residual drain valves (DN 50 DIN 11851 with butterfly valve; actual tank outlet with smaller diameter, presumably DN 40) and manhole gaskets installed; Tanks have minor dents on the shell Overall width: 730 mm Overall height: 1,850 mm Overall length: 2,800 mm Location: External storage 89340 Leipheim Volume: 2,500 liters Product-contact material: V2A 1.4301 (AISI 304) Condition: used Last application: wine storage VESSEL Base design: on feet Number of feet: 4 MATERIAL SPECIFICATION Cpodpfjyckh Aox Ac Neu Feet material: stainless steel

Condition: used, tank capacity: 2,500 l, GENERAL Equipment: Disc valve Design: upright Remarks: 1 manhole approx. 310 x 410 mm located in the cylinder; 1 bolted outlet fitting with disc valve increases the outlet to DN 50 DIN 11851; tank was professionally cleaned and overhauled in 2024; brand new drain valves and manhole gaskets installed Internal diameter: 1,230 mm Overall height: 2,950 mm Location: Bremen Nameplate: Volume: 2,500 liters Cylinder wall thickness: 4.0 mm Product-contact material: V2A 1.4541 (AISI321) Condition: used Cylindrical height: 1,910 mm Last application: wine storage TANK Supporting type: legs Number of legs: 3 pieces EQUIPMENT Manhole / Dome: in the cylinder Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Leg material: stainless steel Cedpjyckhvsfx Ac Nopu TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 4.3 mm Top wall thickness: 4.5 mm

Condition: used, tank capacity: 2,500 l, GENERAL Equipment: Spray head, crane lugs Design: vertical Remarks: Foot ends cut off (see photos) Internal diameter: 1,190 mm Total height: 3,850 mm Max. overpressure: 1.0 bar Agitator: propeller Location: Bremen Nameplate: Volume: 2,500 liters Cylinder wall thickness: 4 mm Product-contacting material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 2,500 mm Last application: cosmetics Cedpfxeyckfbo Ac Njpu TANK Support type: feet Number of feet: 4 pcs EQUIPMENT Manhole / dome: in top head (DN 600) Outlet: 34 mm Note: Motor/gearbox missing, outlet end cut off MATERIAL SPECIFICATION Feet material: stainless steel AGITATOR Agitator arrangement: eccentric in top head TECHNICAL DATA / DIMENSIONS Head wall thickness: 5 mm

Condition: used, Year of construction: 2006, Szilank line (2006): -washing machine (needs renovation) -assembly station Csdpfxsyfpg Aj Ac Nopu -panel press without gas filling in good condition (size 2100 x 2500 mm) - knock-down table Year: 2006 Line length: 16.5 m Direction: right-left

Year of construction: 2008, condition: good (used), KARVILLE Tornado 2500 – overhauled in 2020! Year of Manufacture: 2008 _____ Machine Specifications and Equipment: Tornado - Electric Tunnel The newest addition to our product line, the tornado tunnel is an electric shrinking system ideal for use on steam sensitive applications. With the capability to create a superior shrink appearance similar to steam tunnels on almost any container shape, this tunnel generates a compact solution to applications where high quality shrinking is required and the use of steam is not acceptable. The Tornado provides the best solution for:  Shrinking for Difficult Shaped Containers  Shrinking for Water Sensitive Products  Shrinking for Heat Sensitive Containers like PET  Eliminating after-shrink wrinkles  Saving Energy - High Efficiency Design  Saving Space - No Need for Extra Leister Guns and Special Rotation Systems  Minimizing Mechanical Maintenance - Simple Machine Structure  Eliminating the need for Steam Boiler and Infrastructure. This is ideal for blow molders, contract packers and thermoformers. Cedpfx Asvxkatsc Njpu _____ Accessories Included:  Manuals  Keyes  Etc. _____ Technical and Optical Condition: • Technical: 9/10 (checked and in excellent running condition) • Optical: 9/10 (cleaned and ready for immediate end-user deployment) _____

Condition: as good as new (ex-display), Year of construction: 2022, Stierli Radial 2500 CNC bending machine Radial bending machine with large rotary table for bends up to 360°. Bending power 2500 Nm Bending capacity flat steel 60x15 mm S235 Bending capacity round steel ø30 mm S2353 turntable ø : 390 or 550mm Cedpfx Acogqfp He Nopu Pre-feed machine year 2022 incl. hand- and foot pedal Machine as new Works like a classic hand bender, but driven, very precise and programmable. Incl. stop manual or programmable CNC stop 1, 2 or 3m. The bending angles as well as the stop positions are digitally programmable and can be stored in bending programs. The standard tooling is made by simple bending pins. A driver bends the material around these bending pins. These tools can also be manufactured very easily by the customer. In addition to the standard bending bolts, we (or our customers themselves) also manufacture tools for other sections. Possible are sheet metal bending, flat steel, round steel, various profiles, frames etc.. Bending jaws can also be screwed on, which allows bending of very small radii. (similar to a hand bending machine) This machine solves your bending tasks!

Condition: new, Wide span shelving / Basic shelving / 2550x2500x600 WxHxD Wide span shelving, new Dimensions: L 2550 x H 2500 x D 600 mm incl. 4 shelves Shelf load: ~ 250 kg with evenly distributed load Cpodjcfbzcopfx Ac Nsu #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# Basic shelving consisting of: 2x shelf uprights, 600x2500mm unassembled, incl. cross and diagonal braces, plastic base plates 8x crossbars 2450mm, incl. locking pins 4x shelves 2430x545mm, Thickness: 22 mm

Condition: new, shelf height: 2,500 mm, Wide span shelving, new dimensions: L 2550 x H 2500 x D 800 mm incl. 4 shelves shelf load: ~ 250 kg with evenly distributed load #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# Basic rack consisting of: Cpedpfx Aecfby Tsc Nou 2x shelf uprights, 800x2500mm unassembled, incl. cross and diagonal braces, plastic base plates 8x crossbars 2450mm, incl. safety pins 4x shelves 2430x745mm, thickness: 22 mm

Condition: new, Wide span rack, new dimensions: L 2050 x H 2500 x D 800 mm incl. 4 shelves Cpsdpfx Ajcfby Roc Neu shelf load: ~ 300 kg with evenly distributed load #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# Basic rack consisting of: 2x shelf uprights, 800x2500mm unassembled, incl. cross and diagonal braces, plastic base plates 8x crossbars 1950 mm, incl. safety pins 4x shelves approx. 1940x745mm, thickness: 22-25 mm

Condition: new, - Basic shelf - wide span shelving, new dimensions: L 2050 x H 2500 x D 600 mm incl. 4 shelves shelf load: ~ 300 kg with evenly distributed load #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# Basic rack consisting of: 2x shelf uprights, 600x2500mm Cpodpecfbzfofx Ac Nju unassembled, incl. cross and diagonal braces, plastic base plates 8x crossbars 1950 mm, incl. safety pins 4x shelves approx. 1940x545mm, thickness: 22 mm

Condition: used, Year of construction: 2011, turning diameter 460 mm turning length 795 mm control MORI SEIKI M730 BM Swing diameter face slide 590/360 mm spindle passage 80 mm Traverse X/Z: 260/795 mm Number of working hours 19.552 h Cutting time 10.704 h spindle drive 18,5 kW total power requirement 40 kVA weight of the machine ca. 6,4 t dimensions of the machine ca. 3.994 x 3.056 x 2.187 m Chip chuck Ø250 mm. Chuck sub-spindle Ø170 mm. Holder HAINBUCH chip conveyor suction Bar feeder Hydrafeed Multiservo mod MSV Cpedpoxwzfyjfx Ac Nju max. bar length 1,600 mm

Condition: new, functionality: fully functional, Year of construction: 2025, overall weight: 400 kg, total height: 950 mm, total length: 2,600 mm, total width: 820 mm, load capacity: 2,000 kg, latticeMastWinch Producing company Manitou Type JW 2500/2000 Year built 2025 Height (mm) 950 Length (mm) 2,600 Cpsdpfxeya Ix To Ac Neu Lifting weight (kg) 2,000 Weight (kg) 400 Width (mm) 820

Condition: new, functionality: fully functional, Year of construction: 2025, overall weight: 400 kg, total height: 950 mm, total length: 2,600 mm, total width: 820 mm, load capacity: 2,000 kg, latticeMastWinch Producing company Manitou Type JW 2000/2500 Year built 2025 Height (mm) 950 Length (mm) 2,600 Lifting weight (kg) 2,000 Weight (kg) 400 Cpodpfsya Ixtsx Ac Nju Width (mm) 820

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Serial No. Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Frame gap: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm (travel) Cedpsya Iaqefx Ac Njpu Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working speed: 1-10 mm/s Y return speed: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8-axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, movable laterally (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 stop positions up to max. 1080 mm - Press beam with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light curtain - Operation via electric foot switch and/or two-hand control panel - Hydraulic clamping for the upper tool (TRUMPF system) with 20 mm clamping groove - Tool holder for the lower tool, height 160 mm x width 60 mm, with locating groove 14 x 23 mm - Tool system TRUMPF, supplied without tools Space requirements (L x W x H): 0 x 2500 x 3400 mm Transport height of the machine: 3360 mm Weight: 17,000 kg Good condition

Condition: used, Year of construction: 1997, Catalogue number 7724 TECHNICAL DATA - number of working spindles: 6 pcs - spindles pressed pneumatically onto the material - milling units adjustable up/down, right/left, and at angles - 6 pneumatic clamps - stepless feed speed adjustment - max milling height: 130mm - max milling length: 2500mm - max milling width: 330mm - shaft diameter: 40mm Cpodpjya Hl Esfx Ac Nou Motor power: - milling units 1-2: 2 × 5.5kW - milling units 3-4: 2 × 4.5kW - milling units 5-6 universal (sanding or milling): 2 × 4.5kW - extraction nozzle diameter: 10x152mm - air supply requirement: 6-8 bar - dimensions (L/W/H): 8000x3000x2420mm - weight: approx. 6000kg ADVANTAGES – Italian manufacture – For through-feed processing of curved elements according to template – 6 milling units – Not repainted – Safety guards – Original DTR + CE documentation – Used machine in very good condition Net price: 46,900 PLN Net price: 11,160 EUR (based on 4.2 EUR exchange rate) (Prices may change depending on exchange rate fluctuations)

Condition: new, Year of construction: 2023, operating hours: 1 h, functionality: fully functional, Equipment: rotational speed infinitely variable, BE 2500 Liter Steel Enamel Reactor Agitated Tank, condition unused CRYOLOCK® 2-stage agitator, enamel color blue, conductive enamel layer, support ring construction. Nominal capacity: 2500 liters, total volume: 3500 liters. Heating/cooling via double jacket. Double jacket capacity: 430 liters Operating pressure in the vessel: -1/+4 bar, double jacket: -1/+8 bar, operating temperature: -30/+160 °C, bottom outlet valve. Total weight approx. 3800 kg Manufactured according to AD-2000 Ed. 2012 Drive motor and gearbox ATEX certified, gearbox infinitely adjustable. Technical details are available on request. Please contact us for a written quotation. Dismantling, packaging, and loading onto a truck will be organized and supervised by Cycron GmbH. We therefore guarantee highly professional execution of all work. Cpedoyfg Azjpfx Ac Nou For further questions or to contact us, please feel free to reach out at any time, we look forward to hearing from you. Cycron GmbH, Switzerland

Condition: excellent (used), Year of construction: 1988, operating hours: 3,100 h, functionality: fully functional, overall weight: 8,960 kg, Willibald MZA 2500/Shredder/Chipper • Manufacturer: Willibald • Model: MZA 2500 • Year of manufacture: 1988 Cpedpjxu Dipsfx Ac Neu • Operating hours: 3,100 hrs • Engine: V6 Mercedes-Benz • Throughput: 75 m³/h depending on material • Feed opening: 500 mm • Swinging hammers • Suitable for shredding organic material for composting (garden waste, pruned wood up to a diameter of 30 cm) • Capable of reducing waste wood and used timber up to a diameter of 30 cm • Number of axles: 2 tandem/dual axles • Brake system: Air brakes • Towing eye: 40 mm • Total weight: 8,960 kg • German machine • Immediately operational • This offer is non-binding and subject to prior sale. - Subject to intermediate sale. - Errors and/or typographical mistakes excepted. - Sale according to our general terms and conditions.

Year of construction: 2009, condition: good (used), Railcar, heavy-duty transport wagon, transport wagon, heavy-duty wagon, electric heavy-duty rail wagon, rail wagon, trailer -Manufacturer: Seacom, railcar with drive -Type: GWN 40t -Weight increase: two railcars coupled together to 80t with ID36864 -Platform: 4000 x 2500 mm -Load capacity: 40,000 kg -Drive: with electric geared motor -Track width: 1500 mm (1420/1580) -Wheel arch width: 80 mm -Overall dimensions: 4060/2500/H770 mm Cpedpfxeyam H Ae Ac Neu -Empty weight: 2400 kg

Condition: used, Year of construction: 2003, pressure 250 t stroke 20 - 190 mm no. of strokes 25 - 140 /min Cpsdpfx Asvuun Tjc Nsu throat 460 mm passage to the back 590 mm dayligth 690 mm table surface area 1500 x 880 mm hole in the table 950 x 250 mm table height over floor 900 mm ram surface 870 x 725 mm ram adjustment 120 mm power requirement 30,0 kW Weight 32,0 t dimensions of the machine ca. 2,34 x 2,38 x 3,99 m x m x m permitted for manual loading and automatic mode according to the CE-norm with infinitely variable drive, light guard (make Sick), hydraulic clutch/brake combination, hydraulic overload protection in ram, automatic stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, fix table, drawing cushion in table (20 t), motoric centralized lubrication, operator's console with two-hand operation Width between the tie rods in front 940 mm Side passage 900 mm

Condition: used, Year of construction: 2011, Pressure 200 t stroke 900 mm distance between columns 3520 mm Distance table/ram, max. stroke up, adjustment up 1400 mm Table surface area 3500 x 1600 mm Ram surface 3500 x 1600 mm Side window 1150 mm feed down 500 mm/s feed up 550 mm/s working feed 38 mm/s Cpjdpfev Svbvsx Ac Nou oil volume 2000 l power requirement 90,0 + 21,0 kW Weight 34,00 t dimensions (WxDxH) 4,4 x 3,3 x 5,5 m permitted for manual loading according to the CE-norm with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard (Sick) on front and back (cascading), hydraulic ram interlocking, operation with up to 4 operator's possible

Year of construction: 2007, condition: excellent (used), REF: MM5765 1 x Record Packaging Machinery flow wrapper with Domino V230i thermal transfer overprinter and infeed conveyor. Fitted with an adjustable folding box, this unit is suitable for wrapping a variety of products in printed or clear film. Model - Scorpion MD SP. Date of manufacture - 2007. Speed - between 20 to 120 packs/minute (depending on product size). Sealing jaws - 350mm long. Infeed conveyor - 185mm wide. Outfeed conveyor - 220mm wide. Cpodpfx Acsukw Nbs Neu Previous use - for packing cereal bars and biscuits. Overall dimensions - 4670mm L x 1350mm W.

Condition: good (used), 275 USED Diosna Spiral Mixer. TECHNICAL DATA: - Bowl capacity: 25 kg flour, 40 kg dough. EXTERNAL DIMENSIONS (in cm) - Width 56, - Depth 88, - Height 115. BOWL DIMENSIONS (in cm) - Width 52, - Height 34. Paid options available: transport / assembly / commissioning of the device. Csdpfx Acoydmf Te Nspu The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: new, Year of construction: 2026, SL class = machining area X 1250 mm x Y 2500 mm x Z 100 mm High-precision linear motor axis system with 6 KW laser power Cpsdpfxok Ranze Ac Nsu (* Prices depending on equipment and laser power, this is a brand new laser machine from our production) Laser processing easy and high-precision - Laser cutting with high speed and quality

Condition: good (used), 274 USED Diosna Spiral Mixer. Csdpfx Acsydmako Njpu TECHNICAL DATA: - Bowl capacity: 50 kg of flour, 80 kg of dough - Buttons and timers need replacing. EXTERNAL DIMENSIONS (in cm) - Width 70, - Depth 100, - Height 170. BOWL DIMENSIONS (in cm) - Width 75, - Height 46. Paid options available: transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Year of construction: 1999, condition: good (used), Very nice high 10-t speed Japanese press with fixed stroke of 15 mm, rates from 0 to 2500 strokes per minute Csdpfxoim Iv Dj Ac Njpu