Used Daewoo 225 Lcv for sale (65)

Condition: new, connected load frequency 230 V battery 24V / 100Ah Brush diameter 510 mm turning speeds 175 U/min Ijdpfjidabkex Ah Neal 0 Luft 24 L / s tank capacity 50 / 50 Liter weight 160 kg range L-W-H 1,1 x 0,52 x 1,0 mm Daewoo floor cleaning machine: Packed with battery and charger Theoretical surface cleaning: Output: 2000 m²/h Suction width: 850 mm Cleaning width: 510 mm Max. working area incline: 2% Fresh/waste water tank volume: 50/ 50 L

Condition: good (used), Year of construction: 2000, Machine come without tool holders and any additional equipement. Parts shown by hand not come. Technical details are shown on picture. Iedjw Tc S Uepfx Ah Neal

Condition: used, functionality: limited functionality, Year of construction: 2005, operating hours: 3,080 h, load capacity: 4,500 kg, lifting height: 6,050 mm, free lift: 1,800 mm, fuel type: gas, mast type: triplex, construction height: 2,780 mm, fork length: 1,200 mm, empty load weight: 7,500 kg, total length: 3,200 mm, drive type: Treibgas, construction width: 1,700 mm, LPG forklift Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: poor Iasdpfx Aevcf Rneh Njl Front tires type: Superelastic Front tires condition: 0 - 20% Rear tires type: Superelastic Rear tires condition: 0 - 20% Description: Engine defective Sideshift, 3rd valve, front work light, full free lift, dual tires,

Condition: used, CNC lathe Daewoo Lynx 200 B CNC Fanuc 21t 10 tool turret tailstock bar feeder The machine can be seen under power in our warehouse (M i m u) Ijdpfjt Ip Ukjx Ah Noal

Condition: like new (used), functionality: fully functional, Year of construction: 2019, operating hours: 1,420 h, load capacity: 3,000 kg, lifting height: 4,700 mm, mast type: triplex, Equipment: pallet forks, sideshift, Doosan forklift D30G Fuel: diesel Year of manufacture: 2019 Operating hours: 1420 Triplex mast and sideshift Iedpfx Ahjw R U Nyo Njal 4th valve

Condition: used, Year of construction: 2002, functionality: fully functional, turning diameter: 1,600 mm, spindle motor power: 45 W, spindle speed (max.): 1,500 rpm, travel distance X-axis: 1,200 mm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 10,000 m/min, rapid traverse Z-axis: 10,000 m/min, Daewoo Doosan PUMA V-1200M CNC vertical lathe, year 2002, equipped with FANUC Series 18-T control, designed for machining large and heavy workpieces, ideal for heavy-duty and industrial sector applications. Main technical specifications: Maximum swing and turning diameter: Ø 1,600 mm Maximum turning height: 1,200 mm Maximum workpiece weight: 6,000 kg Chuck diameter: Ø 1,200 mm RAM axes: X (horizontal): 1,200 mm Z (vertical): 900 mm C axis: 360° rotation, minimum positioning increment 0.001° Main spindle: Speed: 2 ÷ 320 rpm (2 ranges) Power: 37/45 kW RAM driven spindle: Taper ISO-50 Speed: 15 ÷ 1,500 rpm RAM section: 240 x 240 mm Tool turret: 16 stations, with BT-50 type tools Max. tool diameter: Ø 400 mm Max. tool length: 450 mm Max. tool weight: 50 kg Maximum tool weight in magazine: 600 kg Feeds: Rapid traverse X/Z axes: 10,000 mm/min Working feeds X/Z axes: 3,000 mm/min Included accessories: Iasdpjwt S Rhofx Ah Njl Chip conveyor Coolant tank with pumps Spindle line air conditioner Various fixed and driven tool holders Manuals, electrical diagrams, CE declaration Solid and high-performance machine for vertical machining of large workpieces with high precision.

Condition: new, rated capacity 8,1 kVA voltage 400 / 230 V frequency 50 Hz tank capacity 15 l engine output 11 / 15 KW / PS Iaodpfeu Imgfex Ah Njl weight of the machine ca. 0,165 t dimensions of the machine ca. 0,88 x 0,56 x 0,76 m Diesel generator with: - equipped with electric start. - Equipped with automatic voltage regulator. - Air cooled - Mobile. - Direct injection - Low oil level alarm with auto-stop function.

Condition: good (used), Year of construction: 1998, Parts shown by hand not come. Iaedpfxewb Aqne Ah Nsl Technical data are shown on picture.

Condition: used, Year of construction: 2001, CNC FANUC 18i M Iasdpfx Ahskx E Tbo Nol X AXIS STROKE 2000 MM Y AXIS STROKE 850 MM Z AXIS STROKE 830 MM SPINDLE SPEED 6000 RPM SPINDLE TAPER ISO 50 DIN 69871 TABLE 2000 X 800 MM WORKPIECE LOAD 3000 KG RAPID FEED I X - Y - Z 12 MT/MIN COOLANT INTERNAL 5 BAR EXTERNAL HIGH PRESSURE 20 BAR ATC 40 PLACE 4 CNC AXIS ROTARY TABLE WITH TAILSTOCK CHIP CONVEYOR

Year of construction: 2022, condition: new, rated capacity max. 8,1 kVA capacity in kVA bei 400 V - 7,5 kVA rated capacity bei 230 V - 6,1 kVA power fuel Diesel 0 tank capacity 15 l 0 11 KW cubic capacity 498 ccm Iajdpfxot Smitj Ah Njl weight of the machine ca. 0,165 t dimensions of the machine ca. 0,8 x 0,65 x 0,75 m Diesel fuel emergency generator, Power 8.1 KVA, Socket connections: 1 x 400V - 16A, 1 x 230V - 32A, 1 x 230V - 16A, with electric starter, with battery: 32 AH, noise level: 72-74 dBA (7M), automatic voltage regulation (AVR), overload protection, diesel fuel consumption: 1,25 ltr/h at 50% load,

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 1,250 mm, area performance: 6,380 m²/h, overall weight: 396 kg, input voltage: 220 V, total height: 1,300 mm, total width: 1,250 mm, total length: 1,600 mm, water tank capacity: 40 l, battery voltage: 48 V, battery capacity: 65 Ah, Daewoo DS 80 Bj. 2025, new machine Iaedjwhixljpfx Ah Nsl

Condition: good (used), Year of construction: 2002, operating hours: 50,000 h, functionality: fully functional, machine/vehicle number: AV4C0039, travel distance X-axis: 570 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 570 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 32 m/min, rapid traverse Z-axis: 40 m/min, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 10,000 m/min, feed rate Z-axis: 10,000 m/min, nominal power (apparent): 40 kVA, table load: 300 kg, rotary table diameter: 712 mm, overall weight: 7,600 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 50,000 h, coolant supply: 15 bar, spindle nose: DIN ISO40, number of spindles: 1, number of slots in tool magazine: 32, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, Machine is very well mantained and running in our production.Two pallets, DIN ISO40, Fanuc 18i-M Isdovt Sgqopfx Ah Nsal

Condition: used, Year of construction: 2002, DAEWO machining center ACE-VC 320 Isdpfeupkiljx Ah Nsal

Condition: used, - “DAEWOO” ACE V50P vertical machining center – Pallet changer – 30 stations for tools on chain – availability of over 40 tools/tool ​​holders, some of which are reamers with micrometric adjustment and 3 tool holders with tank for lubricant/coolant liquid - CNC Fanuc - machine still installed in the workshop, operational until 2021 - availability for any test - use and maintenance book - Price and detailed technical characteristics on request - Isdpfxjnr R A Ij Ah Njal

Condition: excellent (used), Year of construction: 2004, DAEWOO Mynx 540 cnc vertical machining center Iasdpjxt E Drefx Ah Nel Year: 2004 Specifications: Axis X travel 1020 mm Axis Y travel 510 mm Axis Z travel 625 mm Rotary table ( Tsudakoma RZ-200 ) Type of CNC FANUC 21i-MB Table length 1200 mm Table width 500 mm Max. part weight 800 kg Number of tool positions 24 Spindle taper BT 40 Max. spindle speed 8000 rpm Spindle motor power 15 kW Weight 7500 kg Machine has new spindle, fitted in October 2025. Accessories/options: - 4.axis Rotary table ( Tsudakoma RZ-200 ) - Through spindle coolant - Documentations - Remote control - Coolant tank - Spindle cooler Under power in our warehouse!