Used Cwk 400 for sale (17,413)

Year of construction: 2004, condition: excellent (used), Belt Monorail Shot BBlaster Brand: Rösler Drum ø: 400mm Pieces length max.: 700/1000mm Pieces max. kg: 12 kg Kjdpfx Adon E Tubj Newt Loadingcapazity: 100kg Wheels: 4 Pieces á 7,5 kW Total Power : 45kW Garantie: 6 monatige Funktions- und Gewährleistungsgarantie bei Inbetriebnahme durch DECK Sarl. Ersatzteilversorgung für die nächsten 10 Jahre OPTIONAL: Lieferung in Ihr Werk Richtmeistermontage / Inbetriebnahme / Schulung

Condition: new, machine/vehicle number: ee3256d63dd23b3ad1bdf9ab0, empty load weight: 10,280 kg, maximum load weight: 13,720 kg, overall weight: 24,000 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader trailer Welded steel construction Turntable with powerful ball bearing slewing ring Folding rear support 2 wheel chocks with holder Aluminum side bumpers Rear splash guards across the entire width Quarter-shell mudguards in front of 1st axle Excavator trough above the rear axles starting to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep, 2 pairs of lashing holes each 5 tons in the excavator trough on the side of the longitudinal frame approx. 300 mm from the front and approx. 200 mm in front of the rear slope 1 storage box on offset recessed in the floor with cover, W=720 mm/ L=520 mm / D= 170 mm Kedpji Ri I Nefx Ad Nswt 1st pair of wheel recesses recessed in the low bed in the tramline area after the offset, sloping towards the entrance, length at the bottom approx. 1600 mm, approx. 400 mm deep. Note! Frame in the main beam area 400 mm higher than wheel recess.2nd pair of wheel recesses between the axles in the drop center in the tramline area, slanted towards the entrance, length at the bottom approx. 600, approx. 300 mm deep. Note! Frame in main beam area 300 mm higher than wheel recess. Wheel well cover can be pulled out from the main frame, with wooden inserts. Distance from main frame beam to beam outside approx. 1280 mm (wheel well area) Widenings extendable to 3,000 mm, foldable on the wheel recess extensions (widening not in the rear slope and not in the wheel recesses below) (track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks in the middle of the cargo bed or under the cargo bed if technically possible Wooden planks 70 mm for widening to 3000 mm Low loader lashing eyes 1 pair of front lashing eyes recessed on offset, 5 tons each 8 pairs of lashing rings at the top and sides of the outer frame, 10 tons each 2 x at the front on the offset 6 x in the low bed First lashing eye 250 mm from the front and last max. 250 mm from the rear, distance between lashing eyes not greater than 1100 mm 5 pairs of ring lashing eyes embedded in the outer frame, 5 tons each (can be converted to stake pockets) Trailer drawbar Turntable Drawbar with tested 50 mm drawbar eye with 8° inclined drawbar eye Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Air suspension with lift & lower valve can be operated separately at the front and rear Wheels and tires 235 / 75 R 17,5 at the manufacturer's choice Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-loaded parking brake Trailer Infocenter, for displaying vehicle data such as axle load (no calibrated scales) and odometer Axle load detection via EBS-Canbus signal, for display in the driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scales) Vehicle - driving stability system Duomatic connection at the front, with connecting cable to the truck, EBS, electronic braking system with EBS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights in LED with resistor, amber LED lighting on the side, license plate lighting in LED, (Note! with certain towing vehicles, misdiagnoses may occur even though the function is given) 2 white front position lights in LED 2 white/red rear lane departure ligh

Condition: new, machine/vehicle number: 408ba9a39bbb8087056d6e563, overall weight: 24,000 kg, axle configuration: > 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader trailer Welded steel construction Turntable with powerful ball bearing slewing ring Folding rear support 2 wheel chocks with holder Aluminum side bumpers Rear spray flaps across the entire width Half-shell mudguards 1st + 2nd axle with anti-spray flaps behind each axle, anti-spray flaps in front of and behind 3rd and 4th axle Excavator trough above the rear axles starting to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep, 2 pairs of lashing holes each 5 tons in the excavator trough on the side of the longitudinal frame approx. 300 mm from the front and approx. 200 mm in front of the rear slope 1 plastic tool box, with shelf, w=620/h=360/t=440 mm, lockable with a padlock. (lock not included in scope of delivery) 1 storage box on offset recessed in floor with lid, W=720 mm/ L=520 mm / D= 170 mm Widenings extendable to 3,000 mm (not in rear slope) (track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Wooden planks 70 mm for widening to 3,000 mm Storage compartment for wooden planks under the loading area Low loader lashing eyes (40 lashing options) 1 pair of lashing eyes on offset per 5 tons 9 pairs of lashing points at the top and sides, each 10 tons, embedded in the outer frame 2 x front on offset 7 x in the drop deck 6 pairs of lashing holes in the outer frame of the low bed, each with 5 to. (lashing strap attachment) 3 additional pairs of hinged lashing eyes, 10 tons each 1 x inside next to the main frame at the start of the low bed 1 x on offset (protrudes) 1 x embedded in the floor behind the last axle Towing equipment Trailer turntable Drawbar with tested 50 mm drawbar eye, drawbar eye inclined 8° / D-value min. 160 kN Axles + suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation front and rear (rocker compensation) Wheels and tires 235 / 75 R 17,5 at the manufacturer's choice Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 non-interchangeable coupling heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Offset at the front with steel/ checker plate flooring Then with 70 mm softwood floor, steel/ checker plate covering in the wheel housing area Rear slope with 70 mm softwood flooring Drive-on ramps Steel ramps 2,800 mm long, 750 mm wide, can be moved sideways Covered with wood Hydraulic via tractor power take-off with throttle, actuation on the left side in FR Hydraulic connection with SVK plug NW 10/3, incl. connection hose Country of approval / plates Country of registration: Germany 24/7 service hotline Prepared for two-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red on the rear Warning sign according to ECE - 70 Paintwork Hot-dip galvanized frame incl. passivation 15-year warranty against rusting through Drawbar Galvanized Kjdji Ri Dajpfx Ad Njwt

Condition: new, machine/vehicle number: 55d3c5c03e032385649769b1b, empty load weight: 9,900 kg, maximum load weight: 14,100 kg, overall weight: 24,000 kg, axle configuration: > 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader trailer Welded steel construction Turntable with strong ball bearing slewing ring, storage box recessed in Incl. Turntable front end Folding rear support 2 wheel chocks with holder Aluminum side bumper Rear spray flaps across the entire width Widenings extendable to 3,000 mm (not in rear slope) (However, the track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks in the middle of the cargo bed Wooden planks 70 mm for widening to 3000 mm Low loader lashing eyes 3 pairs of lashing points, 10 tons each, integrated in the floor at the front 6 pairs of lashing points at the top and sides, each 10 tons, integrated in the outer frame 1 x to the neck area remaining distributed in between Spacing not greater than 1200 mm 1 x rear slope 5 pairs of stake pockets embedded in the outer frame, inside 70 x 40 mm, (can be converted to 5 to. ring lashing eyes, not included in the scope of delivery) Towing equipment Trailer turntable Drawbar with tested 40 mm towing eye Please note! With 40 mm drawbar eye, the maximum permissible total weight of the truck is 18000 kg, otherwise 50 mm drawbar eye required. Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation front and rear (rocker compensation) Wheels and tires 235 / 75 R 17,5 at the manufacturer's choice Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 non-interchangeable coupling heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Front area steel floor, then with 70 mm softwood floor, steel/checker plate flooring in the wheel housing area Rear slope with 70 mm softwood floor Drive-on ramps Steel ramps 2,800 mm long, 750 mm wide, can be moved sideways covered with wood with spring jack support Operating instructions With an axle load of 10,000 kg, a special permit is required, only indivisible loads possible!!! The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany 1 with Dekra approval and expert opinion (according to §13 EG - FGV) 24/7 service hotline Prepared for two-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paint finish Frame Ral 3002 carmine red 10-year warranty against rusting through Drawbar Galvanized or black, at the manufacturer's choice Drive-on ramps Hot-dip galvanized Kwsdsi Ri I Espfx Ad Nst Attention: Archive pictures!

Condition: new, machine/vehicle number: f79a9f15e7131d57a512793ab, empty load weight: 8,900 kg, maximum load weight: 15,100 kg, overall weight: 24,000 kg, axle configuration: > 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader trailer Welded steel construction Turntable with powerful ball bearing slewing ring Folding rear support 2 wheel chocks with holder Aluminum side bumpers Rear splash guards across the entire width Quarter-shell mudguards in front of 1st axle Widenings extendable to 3,000 mm (not in the rear slope) (However, the track width of the construction machinery or vehicles to be transported must not exceed outer frame width 2,550 mm) Storage compartment for wooden planks in the middle of the cargo bed Wooden planks 70 mm for widening to 3000 mm Low loader lashing eyes 1 pair of lashing eyes on offset per 5 tons 9 pairs of lashing rings at the top and sides, each 10 tons, embedded in the outer frame 2 x front on offset 7 x in the drop deck 6 pairs of lashing holes in the outer frame of the low bed, each with 5 to. (lashing strap attachment) Trailer drawbar Turntable Drawbar with tested 50 mm drawbar eye Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction of tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical incl. axle load compensation front and rear Axle load compensation front and rear (rocker compensation) Kjdpfoi Ri Izsx Ad Nswt Wheels and tires 235 / 75 R 17,5 at the manufacturer's choice Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 non-interchangeable coupling heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 1 LED rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm 2 x 7-pin interchangeable plugs at the front, with connecting cable, floor Front offset with steel/ checker plate covering Then with 70 mm softwood floor, steel/checker plate covering in the wheel arch area Rear slope with 70 mm softwood flooring Drive-on ramps Steel ramps 2,800 mm long, 750 mm wide, can be moved sideways Covered with wood Hydraulic via tractor power take-off with throttle, actuation on the left side in FR Hydraulic connection with SVK plug NW 10/3, incl. connection hose Operating instructions With 10,000 kg axle load, a special permit is required, only indivisible load possible!!! The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany With Dekra approval and expert opinion (according to §13 EG - FGV) 24/7 service hotline Incl. Prepared for two-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red on the rear Paint finish Frame DB 7350 nova gray 10-year warranty against rusting through Drawbar Galvanized or black, manufacturer's choice Drive-on ramps Hot-dip galvanized

Condition: excellent (used), Year of construction: 2018, operating hours: 54,119 h, functionality: fully functional, machine/vehicle number: 14591-179, Make: Röders Model: RPX 400 Year: 2018 Serial no.: 14591-179 Machine type: Gantry machining center / HSC high-speed milling machine, incl. cooling unit Axes: 3-axis Spindle / Tool interface: • Tool holder: HSK E25 (ISO) • Max. tool diameter: Ø 4 mm Worktable: • Table size: 450 x 300 mm • T-slots: 12 mm • T-slot pitch: 50 mm Workpiece capacity: • Max. workpiece height: 330 mm • Max. workpiece weight: 100 kg Kwedjyangdjpfx Ad Not Travels: • X-axis: 410 mm • Y-axis: 294 mm • Z-axis: 210 mm Feed rates: • 0–60,000 mm/min Tool changer: • 18-position automatic tool changer Features / Equipment: • Ceramic bearings • Chip separator and chip conveyor • Includes Erowa ER-016841 UPC clamping chuck Hours: • Total hours (read): 54,119 h • Cutting/milling time: 29,529 h Weight: 3,200 kg Electrical: • 400 V • 32 A Overall dimensions: 2,515 x 1,930 x 2,080 mm

Condition: ready for operation (used), Year of construction: 1980, Saw blade diameter: 400 mm Cutting capacity at 90° round: 120 mm Rectangular: 200 x 80 or 150 x 70 mm Mitre cut at 45° rectangular/flat: 150 x 70 mm Upright: 100 x 60 mm 2 cutting speeds via pole-changing motor: 19 and 28 m/min Feed rate hydraulically infinitely adjustable: 0 - 1000 mm/min Drive motor: 380 V, 1.7/2.6 kW Weight: approx. 850 kg Required space: 1200 x 1100 x 1620 mm Kwodpfx Adex Anl Ds Not

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, total height: 13,450 mm, total width: 4,135 mm, total length: 3,092 mm, load capacity per storage section: 400 kg, input voltage: 400 V, load capacity: 400 kg, Automated Warehouse Optimization Storage System Schäfer Logimat System Type: Logimat 3625 – 815 – 13,450/400 Serial No.: 916.0480-B2 (Logimat 5) Year of manufacture: 2016 Total load capacity: 2 x 30,000 kg Kedperu A Atofx Ad Nswt Load per tray: 400 kg (evenly distributed) Tray dimensions: 3625 x 815 mm Approximate number of trays: 91 units Touchscreen: 15.6 inch Shuttle dimensions (W x D x H): 4135 x 3092 x 13,450 mm Power supply: 400V-50Hz, 3L/N/PE, 24 A, 17 kVA This offer is valid unless the system is sold. Technical specifications per Logimat: - Maximum total capacity of Schäfer Logimat: 2 x 30,000 kg - Maximum tray capacity: approx. 91 trays, 400 kg each, evenly distributed - Tray dimensions: 3625 x 815 x 100 mm - Tray tare weight: 70 kg - Machine dimensions (W x D x H): 4135 x 3092 x 13,450 mm - System footprint approx.: 12.8 m² - Capacity with 91 trays: approx. 269 m², each tray approx. 2.95 m² - Average tray retrieval time: 26 sec - Maximum tray retrieval time: 26 sec - Average tray changeover time: 51 sec - Maximum tray changeover time: 72 sec - Machine weight without trays: 5,200 kg - Integrated LogiTilt - Integrated LogiPointer - Integrated LogiGate - Integrated LogiStainless Machines have been professionally disassembled and can be reassembled by the same technicians if required. Photos and videos of operation and disassembly available on request by email. Price: special export price Price: excl. VAT Delivery time: in stock We have three Schäfer Logimat units available in stock. Machinehandel De Leeuw BV specializes in used paternoster systems by brands such as Kardex, Hanel/Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automated storage systems like the Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Oordeelsestraat 7 – b 5111 PA Baarle-Nassau The Netherlands

Condition: used, Year of construction: 2004, Heidelberg TAL 400 Year: 2004 Description: - Horizontal signature feeders: 1 Kwsdpox Tdpisfx Ad Njt - Incl chain track - Excl. chain - Excluding pump(s)

Condition: used, Year of construction: 2004, Heidelberg TAL 400 Year: 2004 Description: - Horizontal signature feeders: 1 - Incl chain track - Excl. chain - Excluding pump(s) Kodpfx Adox Tdn Sj Nowt

Condition: used, Year of construction: 2004, Heidelberg TAL 400 Year: 2004 Description: - Horizontal signature feeders: 1 Ksdox Tdn Eopfx Ad Newt - Incl chain track - Excl. chain - Excluding pump(s)

Condition: used, Year of construction: 2004, Heidelberg TAL 400 Year: 2004 Description: - Horizontal signature feeders: 1 - Incl chain track - Excl. chain Kwsdox Tdnxjpfx Ad Nst - Excluding pump(s)

Condition: used, Year of construction: 2004, Heidelberg TAL 400 Year: 2004 Description: - Horizontal signature feeders: 1 Ksdpfxox Tdmue Ad Nowt - Incl chain track - Excl. chain - Excluding pump(s)

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, Bruks Wood Chipper Year of manufacture: 2001 Technical condition: very good – after overhaul Technical data: - main engine power: 110 kW - Infeed opening: 700 / 400 mm - Rotor: 3 knives - Feed rollers: 12 units – 9 lower / 3 upper - Vibrating infeed conveyor: 40 m - Inclined discharge conveyor: 13 m Ksdpfjyalfksx Ad Newt

Condition: used, New: No Field of application: Construction Serial number: A00xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20517 Specifications: - Unknown model year - 5224 engine hours - 3049 hammer hours - Machine width: 225 cm - Vacuum cleaner - Rod holder - Winch - Pendulum on undercarriage Kjdjwph D Aspfx Ad Nowt - Undercarriage (see pictures) - Lights - Ready for delivery Description: We have a Tamrock DHA 400S drilling rig for sale. The drilling rig starts and runs, but there is something wrong with the engine. The cause is unknown. Apart from this, everything should work as it should according to the owner. Services have been taken by the owner himself continuously. Some additional costs must be expected. Ready for delivery. Own weight: Width: 255 Hammer hours: 3049 Engine hours: 5224 Model: DHA 400 S

Condition: used, Year of construction: 2025, Number of shares: 7 | Amazone Trailed Reversible Plough Tyrok 400 V 7+0 100 Equipment: Lower link axle Cat. 3 Hydraulic front furrow width adjustment Hydraulic tractive force booster Wheel 500/60-22.5 Scraper for support wheel Body assembly with hydraulic overload protection Central release pressure adjustment Beam, frame height 80 Manual working depth adjustment Parking stand Plough body STU 40 Mouldboard 430 Kwodpfx Adoyaixbo Not Plough point HD Disc coulter holder Disc coulter D500 Wear protector LED rear lights for road travel | Internal No.: 11344659

Condition: like new (used), Year of construction: 2019, operating hours: 180 h, functionality: fully functional, total length: 8,000 mm, total width: 1,200 mm, total height: 1,300 mm, type of input current: AC, input voltage: 400 V, power: 10 kW (13.60 HP), SOEST Universal Surface Line for oiling, staining, lye treatment, patination, etc. Primarily intended for parquet surfaces up to 40 cm workpiece width. 1) Roller Machine RCR-400-L Reverse, for applying and removing surface products such as oils, stains, lacquers, etc. 2) Distributor Machine VP-400-1B-2P-2B with one brush, two pad holders, and an additional two brushes, for distributing, working in, or patinating surface media in the pores and/or also for removing, distributing, and working in depending on the desired surface effects. 3) Accessories include two spare application rollers, a material pump (brand new, never used), four replacement brushes, various distributor pads, and a pneumatic brush cleaning machine. This complete surface finishing line is built for professional industrial use and is configured with a full set of equipment. A considerable amount of accessories for the system, such as extra rollers and cleaning machines, is also included (see photos!). Very robust construction, all motors frequency-controlled (Siemens). Speeds are steplessly adjustable for both forward and reverse operation. Maximum workpiece width is approx. 410 mm. The system is in very good condition, with little use—only approx. 180 operating hours—so it can be described as as-new. This surface processing line was only used as a backup line in parquet production and only for specific surface techniques, which explains the low operating hours (used sporadically from 2019 to 2022). In 2023, our company downsized and the system has been stored ever since or is immediately available, and therefore remains in nearly brand-new condition! Kwsdeyaiafspfx Ad Njt This system is no longer used in our facility and is therefore being sold. The new price for this line was approx. €87,000 in 2019; the current selling price is negotiable! Inspection of this surface line is possible by appointment. If required, we can also offer 10 drying rack trolleys for sale with this system. (The YouTube video serves only as an example video of a similar system configuration!)

Condition: new, Year of construction: 2023, functionality: fully functional, total width: 1,800 mm, total height: 2,000 mm, total length: 1,600 mm, overall weight: 3,000 kg, This is a new brand new machine available immediately. Kedpoukfvpefx Ad Nowt

Condition: reconditioned (used), FEINTOOL HFA 400 is a Fine blanking machine designed for precision, high accuracy and reliability. Capacities: total capacity 4000 kN; vee-ring indenter pressure 1800 kN; back pressure 800 kN; pushing ram 300 kN; stripping 590 kN; tool faces sup. 800x800 mm, inf. 1000x810 mm; cutting speeds 5–50 mm/s, close traverse max 120 mm/s, return 135 mm/s, up to 150/230 c/min. Specs: 3x380 V 50 Hz, main motor 75 kW, total power 82 kW, weight ≈21700 kg, dimensions 5000x3300x3360 mm. Accessories: roll-feed, belt feeding, decoiler. Achieves tight tolerances for demanding industrial applications. Kwjdpfxox S N Hwj Ad Net

Condition: excellent (used), Year of construction: 2015, operating hours: 68,946 h, functionality: fully functional, In operation Hours: 68946 h. Clamping force: 1500 kN Clamping unit 520 H Opening force / stroke: 450 mm. Kwjdjyab R Njpfx Ad Njt Fixed / variable mould mounting height: 250-550 mm. Fixed / variable platen spacing: 700-1000 mm. Column spacing: 520 x 520 mm Mold clamping platens (width x height) 695 x 695 mm. Weight of movable mould half: 1000 kg max. Force – Ejector stroke: 40 kN – 175 mm Idle cycle time: Conformt Min 1.5 – s- 364 Screw diameter: 40 mm. Effective screw length: 20 L/D Screw stroke: 160 mm. Calculated injection volume: 201 cm3 Weight per injection: 184 g. Ps. Material flow rate: 29 kg/h. PS Injection pressure: 2000 s-bar Post-pressure time: 45-2000 s-bar Injection flow: 214 cm3/s Injection speed: 170 mm/s Power – heating zones: 9.7 kW – 5 Oil capacity: 160 l. Weight: 6700 kg. Height: 2215 mm. Length: 4672 mm. Complete installation also available: Injection moulding machine + WITTMANN W818-2066 (2013) Robot + Conveyor belt Robot WITTMANN W818-2558 (2013)

Year of construction: 2016, condition: ready for operation (used), A fully equipped Arburg injection molding machine including clean air supply Filter Fan Unit and removal robot is available. Clamping force: 1600kN, screw diameter: 45mm, max. cylinder heating: 450°C, total connected load: 85.5kW, machine elevation: 100mm, operating hours: approx. 9171h. Arburg Multilift H: axis: B, Z-axis stroke: 1400mm, conveyor belt length: 2500mm, conveyor belt width: 600mm, deposit height range: 900mm-1300mm, temperature resistance: 160°C. Documentation available. An on-site inspection is possible. Ksdpfx Adoyab I Ue Nowt

Year of construction: 2016, condition: ready for operation (used), A fully equipped Arburg injection molding machine including clean air supply Filter Fan Unit and removal robot is available. Clamping force: 1600kN, screw diameter: 45mm, max. cylinder heating: 450°C, total connected load: 85.5kW, machine elevation: 100mm, operating hours: approx. 13361h. Arburg Multilift H: axis: B, Z-axis stroke: 1400mm, conveyor belt length: 2500mm, conveyor belt width: 600mm, deposit height range: 900mm-1300mm, temperature resistance: 160°C. Documentation available. An on-site inspection is possible. Kwedpfx Adsyab Nfj Nst

Condition: excellent (used), mileage: 304,784 km, power: 249 kW (338.55 HP), first registration: 03/1998, fuel type: diesel, tire size: 315/80 R22.5, axle configuration: 6x2, fuel: diesel, brakes: retarder, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel, loading space length: 6,200 mm, Year of construction: 1998, Equipment: ABS, air conditioning, crane, cruise control, electric window regulation, fog lights, retarder, = Further Options and Equipment = - Aluminum fuel tank - Air horn - Radio/CD player - Side mirrors with electric adjustment Kodpfsyabgdjx Ad Nowt - Sun visor - Digital tachograph - Spotlights - Power take-off (PTO) = Further Information = General Information Cab: single Technical Information Number of cylinders: 6 Engine displacement: 12,000 cc Axle Configuration Brakes: disc brakes Suspension: leaf spring Front axle: Tire size: 315/80 R22.5; Max. axle load: 7,500 kg; Tire tread left: 30%; Tire tread right: 30% Rear axle 1: Tire size: 295/80 R22.5; Max. axle load: 12,000 kg; Tire tread left: 80%; Tire tread right: 80% Rear axle 2: Tire size: 295/80 R22.5; Lift axle; Max. axle load: 8,300 kg; Tire tread left: 50%; Tire tread right: 50% Weights Unladen weight: 13,400 kg Payload: 15,100 kg Gross vehicle weight (GVW): 28,500 kg Functionality Crane: HIAB 195 Condition Technical condition: very good Optical condition: very good Damages: none

Condition: used, Year of construction: 2011, pressure: 400bending length: 4050column width: 3400electricity performance: 37,5weight approx.: 25.000messurements (LxWxH): 5750 x 2110 x 3440STOCK CLEARANCE – UNBELIEVABLE PRICE!CNC Press Brake – DURMA AD-S 40400 (4 m x 400 tons) Now available at a special price ex works Böheimkirchen: only EUR 60,000!(Original price approx. EUR 170,000) Technical Specifications:Manufacturer: DURMA Model: AD-S 40400 Year of manufacture: 2011 Bending length: 4,050 mm Kedpovfy Sxjfx Ad Njwt Pressing force: 400 tons Axes: Y1, Y2, X, R + CNC-controlled crowning Motor power: 37 kW Features & Equipment:CNC crowning system, motorized adjustment via control Upper tool: 1010/A/75°, segmented and gooseneck-style Die: Multi-V die Backgauge: CNC-controlled 2 front sheet supports on linear guides CE-certified laser safety system (Lasersafe) mounted on the upper beam Machine fully complies with CE standards Condition: Very good One-time offer – available immediately!Only 1 unit in stock – ready for fast delivery – no lead time!Take advantage of this rare opportunity to own a high-performance CNC press brake at a fraction of the original price.

Condition: used, Year of construction: 2011, pressure: 400bending length: 4050column width: 3400electric current: 37,5 KWweight approx.: 25.000messurements (LxWxH): 5750 x 2110 x 3440STOCK CLEARANCE – UNBELIEVABLE PRICE! CNC Press Brake – DURMA AD-S 40400 (4 m x 400 tons) Now available at a special price ex works Böheimkirchen: only EUR 60,000!(Original price approx. EUR 170,000) Technical Specifications:Manufacturer: DURMA Kedpov Rtg Tefx Ad Njwt Model: AD-S 40400 Year of manufacture: 2011 Bending length: 4,050 mm Pressing force: 400 tons Axes: Y1, Y2, X, R + CNC-controlled crowning Motor power: 37 kW Features & Equipment:CNC crowning system, motorized adjustment via control Upper tool: 1010/A/75°, segmented and gooseneck-style Die: Multi-V die Backgauge: CNC-controlled 2 front sheet supports on linear guides CE-certified laser safety system (Lasersafe) mounted on the upper beam Machine fully complies with CE standards Condition: Very good One-time offer – available immediately!Only 1 unit in stock – ready for fast delivery – no lead time!Take advantage of this rare opportunity to own a high-performance CNC press brake at a fraction of the original price.