Used Cutting-Off Machine for sale (71,573)

Condition: good (used), Iijima’s excellent, fast-running JF-1030, year of manufacture 1991, modified to Bobst stripping tooling Machine number: 8061 Year of manufacture: 1991 Stripping station made compatible for/with Bobst stripping pins and mounting rails Sector segment now driven by a dual set of cam gears instead of the previous triple system, resulting in smoother and vibration-free improved carriage operation. Chains replaced in May 2023 Gripper carriages have been repaired where needed but not replaced; current register tolerance at the front lay with rigid board types is < 0.15mm Electromagnetic clutch (24 VDC, Warner) replaced in May 2023, as well as all roller bearings on this shaft, including those in the casing just before and after the worm gear. Oil seals replaced Oil casings flushed and thoroughly cleaned for conversion from mineral to fully-synthetic oil. Absolutely no foaming, quieter operation. Dismantling as of 23/12/2025; then available for sale ex-warehouse Van Rooij For the end user: can be supplied including installation, transport, and warranty. Other specs according to manufacturer’s brochure; Technical Specifications – Flatbed Die Cutting Machine Materials - Paper from 80 g/m² - Solid fibre board / cardboard up to 2000 g/m² - Corrugated board up to 4 mm, depending on material quality and cutting layout Sheet Sizes & Formats Dusdox Ndu Djpfx Aaasp - Maximum sheet size: 750 × 1050 mm - Minimum sheet size: 350 × 400 mm - Maximum cutting form size: 745 × 1070 mm - Maximum cutting surface: 730 × 1030 mm - Inside chase dimension: 750 × 1050 mm Performance - Maximum cutting pressure: with maximum sheet size - Maximum speed: up to 5,000 sheets/hour - Gripper margin: adjustable - Standard rule height: 8 – 12 mm Pile Data Feeder pile: - Height (incl. pallet): 1,200 mm - Weight (incl. pallet): 1,000 kg Delivery pile: - Height (incl. pallet): 1,080 mm - Weight (incl. pallet): 1,000 kg Auxiliary piles: - Feeder auxiliary pile height: 450 mm - Feeder auxiliary pile weight: 450 kg - Delivery auxiliary pile height: 800 mm - Delivery auxiliary pile weight: 800 kg Machine Dimensions & Weight - Length without feeder: 4,540 mm - Length with feeder: 5,810 mm - Width: 2,350 mm - Height: 2,100 mm - Machine weight: 15,000 kg - Feeder weight: 1,000 kg Electrical & Air Requirements - Power supply: 3-phase AC - Main motor output: 15 kW - Machine connected load: 32.4 kVA - Required compressed air: 6 bar - Air intake volume: approx. 30–50 l/min Additional Information - Heavy-duty industrial construction - Designed for continuous professional die-cutting production - Specifications subject to alteration

Condition: used, URANIA DSK Duodpfx Ajw R Eqboaaop Maximum paper size: 80 × 112 cm Minimum paper size: 30 × 42 cm • Frame opening (normal): 78.5 × 108.5

Year of construction: 1966, condition: used, functionality: fully functional, machine/vehicle number: 562-66280, Hydraulic bridge punching cq cutting machine with forward and backward moving upper platen. Duedpfx Aaeud Rhveaop Working area 600 x 2000 mm. Max oil pressure per cylinder 400 bar with a diameter of 185mm = 107 tons per hydraulic cylinder Guaranteed pressure force regardless of load location 100 tons Dimensions of the machine 320 x 170 x 190 cm Weight 4,500 kg Machine is without oil; which has been drained upon removal All electrical documentation is complete; even warranty certificates for the Sick photocells from 1970 !

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, Operating hours: approx. 68,000 hours Including Sheetmaster, Toolmaster, Gripmaster Dsdoygik Depfx Aaaoup

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Operating hours: approx. 31,000 h. Duodpfx Ajyh Hq Ujaajp

Condition: excellent (used), Year of construction: 2011, Sheet metal format: 3000x1500 mm Axes X/Y/Z: 3065/1560/150 mm Dusdpfx Aasxxkm Njasp Price on request.

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, Beam on: 24,314 h Laser on: 55,176 h Dsdpfxsxfin Ss Aaajup

Condition: excellent (used), Year of construction: 2008, Beam on: 21,660 h Dodpfx Aasxfim Isaoup Laser on: 42,130 h

Condition: good (used), functionality: fully functional, Year of construction: 2018, control type: CNC control, controller model: Siemens Sinumerik 840D, laser type: fiber laser, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 14 mm, sheet thickness aluminum (max.): 12 mm, travel distance X-axis: 3,048 mm, travel distance Y-axis: 1,530 mm, travel distance Z-axis: 160 mm, Equipment: documentation/manual, Machine DURMA HD-FL 3015 III – 4 kW Year of manufacture: End of 2018 (as new) — Technical Data • Working area (X-Y-Z): 3060 × 1530 × 160 mm • Max. sheet size: 3048 × 1524 mm • Max. sheet weight: 200 kg/m² Maximum sheet thicknesses: • Mild steel: 20 mm • Stainless steel: 14 mm • Aluminium (AlMg3): 12 mm Dynamics & Precision: • Travel speed X-Y: 200 m/min • Synchronisation speed: 280 m/min • Acceleration: 20 m/s² • Positioning accuracy: ± 0.02 mm • Repeatability: ± 0.1 mm — Standard Equipment • CE-compliant version with shuttle table & light curtain safety system • Siemens SINUMERIK 840D CNC control • Precitec ProCutter cutting head F150 (auto-focus) • Automatic pallet changer system • Automatic sheet inspection (position & size) • Positioning laser diode • Automatic nozzle cleaning • Central lubrication system • Chip conveyor • User interface (power / speed / pressure) • External Metalix CAD/CAM software with autonesting • Illuminated working area • Multi-chamber extraction system • Warning beacon Duedpfxoynbbqs Aaaep — Special Accessories • IPG 4000 W fiber laser source incl. chiller & compact extraction unit • Motorized chip conveyor • Linear drives for X1, X2, Y axes • Laser service kit • Automatic nozzle changer • Additional Metalix license — Special Arrangements • Roller container for slag & small parts (operator side) • Laser source, chiller & extraction system mounted above the machine • Machine frame to be manufactured by the customer

Condition: excellent (used), Year of construction: 2020, operating hours: 22,500 h, functionality: fully functional, machine/vehicle number: 9041013, type of input current: three-phase, input current: 10 A, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, safety light barrier, Polar Mohr N 137 Plus – High-Performance Cutting Machine Year of manufacture: 2020 | Only 22,129 cuts | incl. spare blade | Top condition For sale is a Polar N 137 Plus high-performance cutting machine, built in 2020. The machine is in exceptionally good and well-maintained condition, with only 22,129 cuts on the counter – essentially as new. Highlights & Features • Professional industrial cutting machine for maximum precision • Very low cut count (22,129 cuts) • Spare blade included Dujdpfeyc Hktox Aaaep • Large air tables at the front and rear for gentle material handling • User-friendly operation via Polar N 137 Plus touch control panel • High cutting accuracy and repeat precision • CE-compliant, GS-certified • Made in Germany Key Technical Data (excerpt) • Model: Polar N 137 Plus • Year: 2020 • Total cuts: 22,129 • Cutting width: 1,370 mm • Power supply: 400 V / 50 Hz / 3-phase • Rated current: 10.1 A Areas of Application • Commercial and digital printing • Packaging and carton manufacturing • Further processing, collating, and cutting operations • Ideal for small to large production runs with the highest quality requirements Conclusion This Polar N 137 Plus is the perfect choice for companies seeking an almost new cutting machine with minimal operating hours. With its 2020 year of manufacture, extremely low cut count, and additional spare blade, this machine represents an exceptionally attractive market opportunity.

Condition: excellent (used), Advantages of the GF4: - Larger working range - Clamping jaws made of aluminum - Motor enables cutting of pipes made from very hard materials - 30% weight reduction due to new body design - Laser cutting position indicator Djdpfx Aajym Unzsaoup - New ergonomic handle - Power cable with swivel and quick connector The GF4 machine can be operated with the AVM automatic rotation module. Technical specifications: - Pipe outer diameter [mm]: 12 - 120 - Pipe wall thickness [mm]: 1 - 9 - Minimum pipe inner diameter (63 mm blade) [mm]: 21 - Minimum pipe inner diameter (68 mm blade) [mm]: 16 - Minimum pipe inner diameter (80 mm blade) [mm]: 4 - Built-in electronic speed controller: 65 - 215 rpm - Power: 1.8 kW without AVM / 1.9 kW with AVM, 200-240 V, 50/60 Hz - Protection class: II - Vibration level (EN 2662, part 1): 2.5 m/s² - Noise level: 79 dB (A) The GF series machines are orbital pipe and elbow cutting machines. The pipes to be cut are clamped in a self-centering, prismatic vice, which prevents deformation. Pipe diameter and tool speed can be easily set via intuitive controls, depending on the material type. The cutting device is guided manually around the pipe, while the electrically driven blade cuts or bevels the pipe edge. This is a planetary cutting method introduced by Georg Fischer. Orbital cutting is a time- and cost-saving process: - Perpendicular, flat, and burr-free cuts - Pipe ends prepared for various joining techniques without additional processing - Cold cutting - No overheating, preventing intergranular corrosion that could cause material cracking - Fast cutting - Saves time and money - Pipe edge beveling - Pipe ends can be beveled simultaneously during the cutting process or separately Optional parts: GF and RA machines can be supplied with either an automatic rotation module (AVM) or manual module (MVM). The AVM module continuously monitors cutting speed according to torque and set parameters. The MVM module, utilizing a gear and handle, enables effortless rotation of the machine head at a constant speed.

Condition: as good as new (ex-display), CNC ultra high pressure water jet cutting machine SAME /Bogacki - 2515 BA 2D -demonstration machine - travel: 2.550 x 1.550 x 200 mm Control system: BOSCH MTX Aquacut edition - CAD / CAM system - Operating PC with portable electronics. Handwheel incl. high pressure pump HB 50 incl. stainless steel working table ( 2.700 x 1.700 mm) incl. CE- safety device (light barriers) incl. splash guard (see pictures) incl. abrasive container (250 kg) incl. abrasive cutting head Allfi incl. red light laser incl. drilling unit 4mm diameter receptacle ER 16 - few operating hours Dusdpogq Nqbofx Aaaop

Condition: used, Year of construction: 2013, Trumpf TruLaser 5030 with Double Tower Storage System – Laser Cutting System - Working area: 3000 x 1500 mm - Laser power: 5000 W - incl. LiftMaster Compact & TruStore 3030 - Year of manufacture: 2013 Equipment: - Working area: 3000 x 1500 mm - Enclosed machine frame - Integrated control cabinet - Automatic longitudinal pallet changer - Torque drive in combination with linear direct drive - Enclosed beam guidance via fiber optic cable (LLK) - Machine cooling unit (water-air) - Integrated control cabinets with interior lighting - Power supply for TruDisk through the machine - Longitudinal conveyor belt - Work area lighting - Positioning laser diode - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning Trumpf Laser: - LLK as per standard layout (laser positioned directly next to the machine) - Laser cooling unit (water-air) - Excitation via pump diodes - Laser power control - Laser logbook function Cutting unit: - Universal cutting unit with fully adaptive lens system - Single cutting head strategy - Protective glass against lens contamination - Protective glass condition monitoring - ControlLine: height control and plate edge detection Control: - Simple workshop programming - Advanced workshop programming - Fast re-production - Sinumerik 840D S L control - 17" touch color display - Integrated technology data - Automatic shutdown - Programmable cutting gas/pressure selection - FastLine - FlyLine Safety: - CE marking - Light guards - Multi-chamber extraction system - Integrated compact dust extractor - Fire alarm in the compact dust extractor - Machine enclosure with certified viewing window / right-hand door - Electric roll-up roof LiftMaster Compact: - Base unit with synchronous loader, peeling device and sheet thickness measuring device, movable pick-up rake, incl. loading/unpacking station - Low-scratch, precise unloading (includes stainless steel rake with band tines, tine spacing 67 mm; up to s = 15 mm) - Cleaning brush for supporting rails - Separation of thin sheet metal for synchronous loader (0.8 – 2.0 mm) TruStore 3030 Double Tower Storage System: - Base module 3000 x 1500 mm Dujdpfoym Umksx Aaaep - Integration LiftMaster Compact - Storage compartment extension for LiftMaster Compact - 2 × extension module 1.9 (for max. 9 storage bays, loading height 90 mm, without pallets, module height 1980 mm) - Storage retrieval device - Extension for storage retrieval device for extension module - 34 storage compartments 90 mm, incl. pallet - 10 pallet bases

Condition: good (used), Year of construction: 2002, functionality: fully functional, Waterjet System IR Manufacturer: WATER JET Ingersol Rand Model: OEM 30 S/N: 0211141 Year of manufacture: 2002 Duodpfx Aaeyrfg Ejajp Control: TH 2030 – new and never used Pump completely overhauled in 2015 Working area: 3000 x 1500 mm Max. working pressure: 60 KSPI Operating voltage: 400 V Control voltage: 24 V Main fuse: 63 A Nominal current: 55 A Frequency: 50 Hz

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 441 h, machine/vehicle number: LCG3015AJ, laser hours: 228 h, laser power: 2,000 W, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 3 mm, sheet thickness copper (max.): 2 mm, table length: 3,070 mm, table width: 1,550 mm, travel distance Z-axis: 100 mm, type of cooling: water, compressed air connection: 6 bar, overall weight: 9,300 kg, total length: 10,136 mm, total width: 2,840 mm, total height: 2,432 mm, Equipment: cooling unit, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, The machine is in as-new condition. It is connected to power; test cuts are possible. Nozzle changer: 8 stations. Dujdjx Tft Aopfx Aaajp

Condition: new, Year of construction: 2025, Complete set double use laser machine ( 3 and 6 Kw in stock ) sheet metal 3015 ( 3 x 1,5 meter ) Tube 15 to 240 mm diameter tube length 6,3 meters include necessary options for a perfect laser line. include 1 filter installation ( cutting air can leave in factory ) include anty fire box. include Vacuum lift for sheet metalplate 800 kg load. no cable unit work on battery in vacuum unit. include 1 compressor for 16 BAR it give posibility to cut steel without gas. for quick cutting and SST steel it save lot of air and can increase the cutting feed consummeble for long time cust free cutting time. include vacuume lifter from 800 Kg lifter work on battery in lifter box Dujdponqzb Isfx Aaaop so with loading machine no cables around you special for save working arear. all in one price. installation, training by professional service team on request

Condition: new, Year of construction: 2025, laser hours: 1 h, laser power: 12,000 W, power: 12 kW (16.32 HP), Description AORE PG-3015: (12 Kw) We can deliver this type Laser cap. from ( 20 Kw) A Compact Design with Complete Protection (CE) table length 3015 mm table width 1550 mm laser head ( BOCI ) autofocus laser capacity Kw 12 overall dimensions 8.250 x 2.880 x 2.320 mm weight of the machine ca. 8.700 kg Furnishing: - Max-photonics Laser source 12 Kw - CYPCUT (full option, no extra control option cost) - High integrated, simple operation, leading technology - Boci autofocus cutting head - CYPCUT - software include: - Nestling, With leapfrog, Edge seeking, Fly cutting, ETC - 23" touchscreen, keyboard, control panel - additional loading unit - central Lubrication system Dedpfx Aaovgrl Hoaeup Cutting capacities: ( for 12 Kw ) - normal steel 35 max 45 mm - stainless steel 30 mm - aluminium 16 mm - brass 12 mm - copper 10 mm Axes: - Machine axes: 3 axes (X, Y, Z,) - X-axis travel 3000 mm - Y-axis travel 1500 mm - Z-axis travel 375 mm - Axis speed X / Y: 120 m / min - Positioning accuracy: +/- 0.03 m - Reputability accuracy +/- 0.02 mm - Acceleration max. 1,5 G Automatic table change: - Number of table 2 (12 second max for changing) - automatic change, max load on tables 1.440 kg. - 2 x CCTV camera on pallet arear on screen assisting gases: - mild steel - oxygen (0.5 - 25 bar) - stainless steel - nitrogen (0.5 - 25 bar) - Aluminium - compressed air or nitrogen (0.5 - 25 bar) including: - Compatible suction system, cap 3 Kw - Spare part basic supply package - cutting from reflective sheet metal materials - 6 part trolly under work table Why CNC Top Ten bv - Cnc Top Ten company have over 50 year experience in CNC machines. - And we have more service and sales locations in west and east Europe - they know from beginning what to respect service, installation and training. - for this machine the installation and training is 1,5 week. Not included. - we can offer cost also depend on end-user place and country. - Machines for cutting thin sheets - axes equipped with Japanese servo motors YASKAWA - Servo motors reach up to 120 m/min. - Accelerations up to 1.5 G - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame, - equipped with world-famous, durable, high-quality components We use the most high quality parts Like: -- Yaskawa servo drives -- Hiwin linear rails -- Tongfei water chiller dual use for source and laser head -- 2 CCTV camera’s on screen -- Auto central lubrication -- Touch screen 23 inch -- For providing quickly service, we add WIFI function for our technician operates troubleshooting and adjust parameters remotely -- YYC/APEX rack and pinion -- standard delivery is with power transformer and stabilizer total power requirement 60 kW -- TBI high precision ball screw for Z axis -- saw tooth blade table -- air and gas pressure real time monitoring on screen -- CE declaration -- warranty 2 year, max 3600 hours Official Dealer CNC Top Ten b.v. Stevinweg 11 B 7741KT Coevorden Holland

Condition: new, Year of construction: 2025, Description AORE S-1530: (3 Kw) from stock Europe. table length 3.060 mm table width 1.530 mm laser head Ray-tools autofocus laser capacity in Kw 3 total power requirement 25-30 kW We can deliver from (1 till max 6 Kw) overall dimensions 4950x2280x2130 mm weight of the machine ca. 4.550 kg Furnishing: - Max-photonics Laser source 3 Kw - Cyp-cut- (full option control) - High integrated, simple operation, leading technology - Ray-tools autofocus cutting head - Nestling, With leapfrog, Edge seeking, Fly cutting - 27" touchscreen, keyboard, control panel - central Lubrication system Cutting capacities: - normal steel 18 mm - stainless steel 10 mm - aluminium 10mm - brass 8 mm - copper 8 mm Axes: - Machine axes: 3 axes (X, Y, Z,) - X-axis travel 3000 mm - Y-axis travel 1500 mm - Z-axis travel 100 mm - Axis speed X / Y: 80 m / min - Positioning accuracy: +/- 0.03 m - Reputability accuracy +/- 0.02 mm – Acceleration max. 0,8 G Duodpfei Dbq Esx Aaaep table change manual: - table load 800 kg. assisting gases: - mild steel - oxygen (0.5 - 25 bar) - stainless steel - nitrogen (0.5 - 25 bar) - Aluminium - compressed air or nitrogen (0.5 - 25 bar)   including: - Compatible suction system - Spare part basic supply package - cutting from reflective sheet metal materials Why CNC Top Ten bv - Cnc Top Ten company have over 50 year experience in CNC machines. - And we have more service and sales locations in west and east Europe - our service team know from beginning how to respect service, installation and training. - for this machine the installation and training is 1 week. Not included in machine price. - we can offer cost also depend on end-user place and country. - Machines for cutting sheets metal - axes equipped with Japanese servo motors YASKAWA - Servo motors reach up to 100 m / min. - Accelerations up to 0.8 G - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame, - equipped with world-famous, durable, high-quality components Like: - Yaskawa servo drives - Hiwin linear rails - Tongfei water chiller dual use - 2 CCTV camera’s on screen - Auto central lubrication .- Touch screen .-.YYC/APEX rack and pinion .- standard delivery is with power stabilizer - TBI high precision ball screw for Z axis - saw tooth blade table - air and gas pressure real time monitoring - CE declaration Official Seller CNC Top Ten bv Denekamp Netherlands

Condition: new, Year of construction: 2025, Laser cutting machine cnc 3 axis this machine is also for profile, tub and different shape. we can deliver machine also with automatic magazin for un-mand production. Effective cutting diameter for round pipes Ø10 mm – Ø225 mm Effective cutting size for square pipes □10 mm – □225 mm Dodpfx Aoktffzjaaeup X/Y/Z axis travel 270 / 6,900 / 230 mm X/Y/Z axis motor power 0.75 / 2.9 / 0.75 kW Positioning accuracy ±0.1 mm Repeatability accuracy ±0.1 mm Maximum travel speed Y axis 110 m/min Universal maximum rotation speed 120 r/min Maximum acceleration 1.5G Maximum pipe feed length 6,200 mm Maximum load weight 300KG Total electrical power of the machine 22 kva Machine size 10.400 x 2.180 x 2.400 mm The weight of the machine 3 ton

Condition: new, functionality: fully functional, TECHNICAL SPECIFICATIONS Model-S1530 Working area: 3.060*1.530 mm Laser power: 3 kW OR 6 kW Strokes on axele X/Y/Z: 1.500 / 3.000 / 100 mm Motors power on axes X/Y/Z: 0.85kW / 1.3 kW(x 2 dual motors) / 0.4 kW Maximum loading table: 800 kgs Positioning accuracy: ±0.03 mm Repeatability accuracy: ±0.02 mm Maximum speed: 80 m/min Duedpexfrgkofx Aaasp Maximum acceleration: 0.8G Exhaust system: Included (with 1,5 kW fan) Machine size (L*W*H): 4.950*2.280*2.130 mm Total weight: 4.550 kgs

Condition: new, Year of construction: 2025, Description AORE PG-6020: (12 Kw) We can deliver this type Laser cap. from ( 20 Kw) Duodjiyun Repfx Aaaep A Compact Design with Complete Protection (CE) table length 6050 mm table width 2050 mm laser head ( SWISS RAYTOOLS ) autofocus laser capacity Kw 12 overall dimensions 14.000 x 3.400 x 2.400 mm weight of the machine ca. 13.450 kg Furnishing: - Max-photonics Laser source 12 Kw - CYPCUT (full option, no extra control option cost) - High integrated, simple operation, leading technology - Ray-tools autofocus cutting head - CYPCUT - software include: - Nestling, With leapfrog, Edge seeking, Fly cutting, ETC - 23" touchscreen, keyboard, control panel - additional loading unit - central Lubrication system Cutting capacities: ( for 12 Kw ) - normal steel 35 max 40 mm - stainless steel 30 mm - aluminium 16 mm - brass 12 mm - copper 10 mm Axes: - Machine axes: 3 axes (X, Y, Z,) - X-axis travel 6000 mm - Y-axis travel 2000 mm - Z-axis travel 375 mm - Axis speed X / Y: 100 m / min - Positioning accuracy: +/- 0.03 m - Reputability accuracy +/- 0.02 mm - Acceleration max. 1,5 G Automatic table change: - Number of table 2 (23 second max for changing) - automatic change, max load on tables 2.400 kg. - 2 x CCTV camera on pallet arear on screen assisting gases: - mild steel - oxygen (0.5 - 25 bar) - stainless steel - nitrogen (0.5 - 25 bar) - Aluminium - compressed air or nitrogen (0.5 - 25 bar) including: - Compatible suction system, cap 3 Kw - Spare part basic supply package - cutting from reflective sheet metal materials - 6 part trolly under work table Why CNC Top Ten bv - Cnc Top Ten company have over 50 year experience in CNC machines. - And we have more service and sales locations in west and east Europe - they know from beginning what to respect service, installation and training. - for this machine the installation and training is 2,5 week. Not included. - we can offer cost also depend on end-user place and country. - Machines for cutting thin sheets - axes equipped with Japanese servo motors YASKAWA - Servo motors reach up to 100 m/min. - Accelerations up to 1.5 G - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame, - equipped with world-famous, durable, high-quality components We use the most high quality parts Like: -- Yaskawa servo drives -- Hiwin linear rails -- Tongfei water chiller dual use for source and laser head -- 2 CCTV camera’s on screen -- Auto central lubrication -- Touch screen 23 inch -- For providing quickly service, we add WIFI function for our technician operates troubleshooting and adjust parameters remotely -- YYC/APEX rack and pinion -- standard delivery is with power transformer and stabilizer total power requirement 60 kW -- TBI high precision ball screw for Z axis -- saw tooth blade table -- air and gas pressure real time monitoring on screen -- CE declaration -- warranty 2 year, max 3600 hours Official Dealer CNC Top Ten b.v. Coevorden Holland

Condition: new, Year of construction: 2025, AORE 3in1 from stock europe is the most modern Laser - Welding - Cleaning and Cutting machine in one. Special software and parameter setting in this laser machine make it posible that you can use it for Cleaning , cutting and welding. Most customers use a welding machine in max 20% of the time, the same is for Cleaning and fine cutting. A cleaning machine and a welding machine from 1,5 Kw together cust atlast 33 till 38.000 euro. so we bring for 50% of the investment cost the same solution and also with the function cutting steel and other materials. when you are interested we can send you a complete offer. we deliver 3 in 1 machine from 1 - 1,5 - 2 and 3 Kw include wire feeder include in the price 1 till 2 Kw need 1 phase 220 volt. 3 Kw is on 3 X 380 volt. Duedpsk Radijfx Aaaep we deliver in complete Europe and have in 3 locations in europe a sales and service organisation.

Year of construction: 2002, condition: used, max. wheel diameter 275 mm gear width 55 mm Dujdjgtvbpjpfx Aaaep max. module 6 min. module 1,5 control Sinumerik 840C tooth width 5,5 mm spiral angle 0/60 ° max. number of teeth 120 min. number of teeth 5 transmission ratio max. 1:10 transmission ratio min. 1:1 spindle speeds max. 110 mm blade head turning speeds 20-110 1/min total power requirement 100 kW weight of the machine ca. 16700 kg dimensions of the machine ca. 5200x2300x2400 mm

Year of construction: 2000, condition: good (used), Platen-type equipment designed for die cutting, creasing, and perforating cardboard and corrugated board. Maximum sheet size: 720 × 520 mm. Output: up to 25–28 cycles per minute. Dujdpsyb Tc Hofx Aaajp Motor power: 2.2 kW. Weight: approx. 2000 kg No documentation available.

Condition: good (used), Year of construction: 2002, Ref. -No.: 10442 Manufacturer: LIEBHERR Type: LC 122 Year of construction: 2002 Type of control: CNC Control: LIEBHERR PC NC Storage location: Halberstadt Country of origin: Germany Hob diameter max.: 90 mm Table Diameter: 145 mm Max. Module: 3 mm Smallest number of millable teeth: 4 Milling head swivel angle: +/- 45 ° Resolution accuracy: 0,1 Degree Workpiece table load: 17 kN Milling speed: 450 - 4.500 1 / min Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Max. rated current: 55 A Fuse in the supply line: 63 A Max. milling diameter spur gears/helical gears: 125 mm Max. milling width spur gears/helical gears: 250 (axial) mm Spindle stroke: 180 mm Max. cutter width: 200 mm Further information: Ambient temperature: +12°.....+40° Operating noise: 78 dB (A) Milling head designation: motor milling head Workpiece axis: vertical Stand: movable Table: fixed Milling method: axial hobbing in the same or opposite direction The machine can be inspected under power by arrangement. Dodpfx Aoym Nbceaasup