Used Cutting Tools for sale (42,365)

Condition: used, Year of construction: 2021, operating hours: 13,392 h, functionality: fully functional, machine/vehicle number: 810061, Anca CPX with Roboloader, 7/24h capacity. - AR300 Roboloader - With tailstock - With white bar magazine Ijdpfx Ajwv T T Njhvjhw - Collet standard available from 3–20 Bdedbowv T T Ns E R Hvxsd - 2 roughing wheels and 1 finishing wheel (used) - Marpos measuring system. (The feet are damaged due to overlapping. They need to be replaced. The software and all other components are functional.)

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, machine/vehicle number: 57/2005, travel distance X-axis: 400 mm, travel distance Y-axis: 310 mm, travel distance Z-axis: 305 mm, workpiece diameter (max.): 260 mm, tool length: 900 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 400 mm Travel Y-axis: 310 mm Travel Z-axis: 305 mm Max. workpiece diameter: approx. 260 mm Max. tool length: approx. 900 mm Spindle power: up to 24 kW Tool holder: SK 50 Speed range: up to 12,000 rpm Grinding wheel changer: 8-position Tool changer: 155-position A-axis swivel range: 360° C-axis swivel range: 224° Feed rate: 2,000 mm/min MACHINE DETAILS Control: PMAC Dimensions & Weight Dimensions (L x W x H): 2,900 x 1,800 x 2,015 mm Total weight: 4,000 kg EQUIPMENT 8-position grinding wheel changer for up to 24 grinding wheels 155-position chain loader for automatic operation Workpiece gripper Measuring probe Automatic central lubrication system Direct position measuring system Infinitely variable spindle speed / feed rate control Hydraulic chuck 1 set of hydraulic collets Additional collets of various diameters for chain loader Isdpfjxqpitjx Ahvshw Grinding wheel holders with spacer rings Documentation Note: The LUST board (inverter drive) is defective and must be replaced.

Condition: good (used), overall weight: 1,200 kg, Machine equipment as required available for an additional charge – almost anything is possible. We specialize in retrofitting Jungner machines. Iodpfx Aetwpyyohvehw

Condition: reconditioned (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: 1289 397, spindle speed (max.): 8,000 rpm, travel distance X-axis: 220 mm, travel distance Y-axis: 130 mm, travel distance Z-axis: 50 mm, swivel angle A-axis (min.): -10 °, swivel angle A-axis (max.): 27 °, TECHNICAL DETAILS Motor power: 2.2 kW Spindle speeds: 1,000 - 8,000 rpm Spindle tilt (A-axis): -10° to +27° Adjustment accuracy: 1 minute Height adjustment (Y-axis): 130 mm Stroke range (X-axis): 220 mm Oscillation stroke: steplessly adjustable during oscillation, 0-30 mm Oscillation frequency: 30/60 rpm Workpiece Spindle Head Ihodpjwzlh Ajfx Ahvew Radius adjustment (Z-axis): 0.01 - 50 mm Adjustment accuracy: 0.01 mm Slide retraction (from grinding to measuring position): max. 49 mm Cross table clamping surface: 155 x 205 mm Travel distances (X-Y): 60 mm each Maximum swivel angle (B-axis): 260° MACHINE DETAILS Connection voltage: 380 V Weight: 1,200 kg EQUIPMENT - Variable grinding pressure - Projector fixed in measuring position - 1 cabinet with accessories - Various grinding wheels and flanges - Coolant tank - Documentation

Condition: good (used), Acera F3 Ihodor Ixpdspfx Ahvsw Top quality milling machine. Motor and gearbox sound perfect. There are no accessories other than what you see in the pictures. Can be loaded into a Eurotrailer and transport organized throughout Europe.

Condition: used, Year of construction: 1954, functionality: fully functional, machine/vehicle number: 541000, total height: 1,700 mm, total length: 1,200 mm, total width: 1,200 mm, overall weight: 815 kg, table length: 700 mm, table width: 70 mm, disc diameter: 150 mm, - Year of manufacture: 1954 - Fully functional, powered, ready for demonstration - Grinding wheels Ø150 mm - Cross travel: 300 mm Ihedexnimtepfx Ahvjw - Longitudinal travel: 450 mm - Table size: 700 x 70 mm / tiltable - Grinding spindle tiltable in Z, X, Y axes - Machine dimensions: 1700 x 1200 x 1200 mm - Weight: 815 kg - Factory No.: 541000 Accessories: - Swiveling dividing head - Swiveling vice - 2x dressing diamonds - Grinding wheel holders - Approx. 15 diamond/CBN grinding wheels - Various grinding wheels - Collets Ø1 – Ø20 mm

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: TX7_600195, total height: 22,500 mm, total length: 25,200 mm, total width: 15,500 mm, workpiece weight (max.): 25 kg, spindle speed (max.): 10,000 rpm, grinding wheel diameter: 202 mm, overall weight: 7,500 kg, grinding length: 400 mm, grinding spindle motor power: 37,000 W, power: 37 kW (50.31 HP), workpiece diameter (max.): 300 mm, disc diameter: 202 mm, 5-axis CNC tool and cutter grinder - available in used condition or fully rebuilt. Powerful and versatile machine with large working envelope and high spindle power for wide range of operations and requirements. Based on a rigid and stable polymer concrete bed (ANCAcrete), it comes with a 37kW direct driven spindle, 2-station wheel changer for up to eight wheels, automatic pallet loading (520 tools max, 15s loading time), mist extraction unit, steady bed and headstock dressing. Ideally suited for volume production of carbide and HSS cutting tools. Ihsdoq Sud Repfx Ahvow !This offer is only available in Europe, Middle East and Africa!

Condition: good (used), 1 x Universal milling machine Iedpst Sdaijfx Ahvjhw Macmon M 100 in very nice condition from vocational school. Technical data and more photos will follow. The machine can be inspected under power.

Condition: excellent (used), Year of construction: 1978, Deckel FP3 tool milling machine with 3-axis Heidenhain digital display. The machine is in very good condition and comes from a government training department. Rigid table, SK 40 spindle mount, accessories: various collets and milling arbors, counterholder. Very good, operational condition. Can be demonstrated under power upon request. Isdpfx Ahsv U Rh Nsvjhw

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: RX7_800314, total height: 1,905 mm, total length: 2,010 mm, total width: 2,508 mm, workpiece weight (max.): 20 kg, spindle speed (max.): 10,000 rpm, grinding wheel diameter: 202 mm, overall weight: 4,500 kg, power: 19 kW (25.83 HP), 5-axis CNC tool grinding machine – completely overhauled (X, Y, Z axes, CNC). High-performance production machine with polymer concrete bed (ANCAcrete), 19kW, 10,000 rpm spindle, dual wheel changer for up to eight grinding wheels. !Offer available only in Europe, Africa, and the Middle East! Ihedpfx Ahsw Uf Sgovew

Condition: like new (used), Year of construction: 2020, operating hours: 4,000 h, functionality: fully functional, EQUIPMENT - ELBARON grinding mist extraction - Collets for all common diameters up to 20 mm - Complete description and installation manual Ihodpoxam Thefx Ahvjw - Original spare spindle available upon request

Condition: refurbished (used), Year of construction: 1988, functionality: fully functional, The UFS-155 is a universal cutter grinder, ideal for manually regrinding straight and helical cutting tools. It offers a reliable and precise solution for regrinding work in workshops and manufacturing facilities. Ihjdpfod Hhhpsx Ahvew Main features: • Simple and user-friendly operation • Backlash-free spiral grinding device • Infinitely variable helix adjustment from 0 - ∞, quickly and easily left or right • Grinding length up to 155 mm • Quick and easy assembly • Suitable for HSS and carbide tools Scope of delivery includes: • 3 SK40 reducing sleeves • 1 control unit • 3 index plates

Condition: like new (used), Year of construction: 2020, operating hours: 4,000 h, The machine is as good as new. It is equipped with an ELBARON sanding mist extraction system. The machine can also be supplied without this device on request. The package includes collets for all standard diameters up to 20 mm. Complete description and installation manual. An original spare spindle is available on request. So there is no waiting time for spindle maintenance. English: Ihjdpot Dyknjfx Ahvsw The machine is in mint condition. It is equipped with an ELBARON grinding mist extraction system. On request, the machine can also be delivered without this device. The package includes collets for all common diameters up to 20 mm. Full description and installation manual. An original spare spindle is available on request. So there are no waiting times for spindle maintenance.

Condition: used, Year of construction: 2014, machine/vehicle number: GX7_801256, total height: 1,900 mm, total length: 2,010 mm, total width: 2,500 mm, workpiece weight (max.): 20 kg, spindle speed (max.): 12,000 rpm, grinding wheel diameter: 202 mm, overall weight: 4,500 kg, power: 1.9 kW (2.58 HP), 5-axis CNC tool grinding machine - available used or reconditioned. Powerful production machine with polymer concrete bed (ANCAcrete), 19kW-, 12.000/min spindle, 2-fold wheel changer for up to eight grinding wheels. Iodpfjtwn Tfex Ahvshw !Offer only available in Europe, Africa, Middle East!

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 140014, travel distance X-axis: 760 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 8,000 rpm, spindle mount: MK 4, table length: 1,270 mm, table width: 305 mm, total height: 2,390 mm, total length: 2,170 mm, total width: 2,510 mm, overall weight: 2,500 kg, workpiece weight (max.): 200 kg, controller model: Siemens 828 D, Equipment: documentation/manual, rotational speed infinitely variable, For sale is a CNC milling machine, model V 760 L by MMD. The machine has been in single-shift operation since 2014 and shows normal signs of use. However, it is fully functional and continues to work precisely and reliably. Technical specifications: Control: Siemens 828 D Automatic tool changer 3D probe included Automatic tool measurement The machine is powered on and can be inspected under operation at any time. Ihjdpfx Ajxnnb Nehvow Condition: Used, well-maintained, technically flawless. Regularly serviced, immediately ready for use. Year of manufacture: 2014 Operation: Single-shift operation Inspection and test run possible by appointment.

Condition: used, Year of construction: 1995, functionality: fully functional, Tool grinding machine Jungner Sweden Ihedpfx Ahjwdihrjvsw Built in 1995 Accessories

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 605, rotational speed (max.): 3,000 rpm, grinding diameter: 12 mm, controller model: Robot CNC, workpiece height (max.): 100 mm, table diameter: 200 mm, TECHNICAL DETAILS Grinding capacity (diameter): Ø 0.025 – 12.7 mm Bar diameter: Ø 1.0 – 12.7 mm Grinding length: W15 (optionally W20) Number of wheels: 1 Table diameter: 200 mm Workpiece height: 100 mm Control system: Robot CNC Axes: 4 axes + 2 programmable robot axes Z-axis: 35 mm, resolution: 0.5 µm X-axis: 25 mm, resolution: 0.1 µm Y-axis: 286 mm, resolution: 0.5 µm U-axis: 15 mm, resolution: 0.1 µm Interpolation: Simultaneous linear interpolation of 4 axes, cylindrical interpolation of 2 robot axes Head Motor Power: 0.70 kW Speed: 300 – 3,000 rpm Rough Grinding Power: 1.5 kW Spindle diameter: Ø 60 mm Grinding wheel diameter: Ø 200 mm Cutting speed: 30 m/s Finishing Power: 0.75 kW Spindle diameter: Ø 100 mm Grinding wheel diameter: Ø 150 mm Cutting speed: adjustable MACHINE DETAILS Total power requirement: 6 kW Iedpfxjxnzd Dj Ahvohw Machine weight: approx. 1.8 t Space requirements (L x W x H): approx. 1.83 x 2.04 x 2.1 m EQUIPMENT - Robot for loading and unloading - Fire protection system

Condition: ready for operation (used), Year of construction: 1978, operating hours: 300 h, functionality: fully functional, machine/vehicle number: UWII/2567/78, Tool grinding machine Motorized height adjustment has been repaired Spare parts supply secured by repair shop >Grinding table 835 x 145 mm< Longitudinal travel by hand 500 mm Pivotability 90 degrees >Grinding head< Transverse movement 220 mm Height adjustment 250 mm Pivotability horizontally and vertically - 360 degrees Extension of the working range via eccentric plate Grinding spindle D60x240 mm Speeds - 2 belt speeds 3300/5400 rpm Weight approx. 700 kg Space requirement 1800 x 1300 x 1600 mm The machine is functional; all movements can be controlled by handwheel. Isdpfxov Hcblj Ahvohw

Year of construction: 1979, condition: good (used), May WH50 relief grinding machine Data: Manufacturer: Rhode & Dörrender (May) Type: WH 50 year of manufacture: 1979 small grinding Ø: 3mm gr.grindingØ: 50mm weight: 1,35t footprint: 1520 x 1600mm Application range: 2 to 4 cutting tools round and relief grinding Suitable for grinding molding tools Ihjdpfohadxcjx Ahvow Diaform dresser

Condition: good (used), Year of construction: 1980, Deckel FP3 tool milling machine with 3-axis Heidenhain digital readout, fixed table, SK 40 spindle taper, accessories: various collets and milling arbors, counterholder. Good operational condition. Can be demonstrated under power by appointment. Ihsdpfsxdr Uxjx Ahvjw

Condition: good (used), Year of construction: 2016, functionality: limited functionality, machine/vehicle number: 550607, feed length X-axis: 384 mm, feed length Y-axis: 317 mm, feed length Z-axis: 217 mm, grinding wheel diameter: 203 mm, rotational speed (max.): 10,000 rpm, Tool grinder with grinding wheel changer and Fanuc FastLoad automation Condition: There may be a defect in the control display. A similar machine, built in 2019, has already been successfully auctioned by the same seller! FastLoad Loading System Special Feature: Fully enclosed within the machine enclosure Application: Automation solution for low-volume production Access: Operator access from the front of the machine Gripper Set: One set for the entire diameter range Space Requirements: Does not increase the machine footprint TECHNICAL DETAILS Peak grinding spindle power: 9.5 kW Direct-drive grinding spindle: Yes Speed: 10,000 rpm Number of numerically controlled axes: 5 Grinding wheel diameter: 203.5 mm Grinding wheel changer: 2 slots Axes X-axis: 384 mm Y-axis: 317 mm Z-axis: 217 mm C-axis: 230° A-axis: 360° A-axis rotation: 600 rpm Tool Handling Suitable tool diameter: Ø2 - 20 mm Tool length range: 30 - 150 mm Loading time: 20 seconds Number of tools Ø2 mm: 153 Ihodsv T Uzqjpfx Ahvjw Number of tools Ø12 mm: 36 Measurement and tool control Measuring probe mounted on the grinding head: yes Tool profile measurement: directly on the machine without removing the tool MACHINE DETAILS Polymer concrete machine base: yes Installation dimensions: 1,930 x 2,190 x 2,015 mm Machine weight: 4,500 kg Connected load: 16 kVA EQUIPMENT - Measuring probe mounted on the grinding head - Possibility of direct tool profile measurement - Polymer concrete machine base - Grinding wheel changer - Fanuc FastLoad automation

Condition: refurbished (used), Year of construction: 2002, CNC- Retrofit Unit- Haller NCW 155 Can be mounted / retrofitted on the most manual Tool and Cutter grinding machines 2 Axes CNC- controlled / resolution of system 0,005 mm Grinding length in X –axis / 155 mm Rotation in C-axis 360° / unlimitted CNC- control with Coloured LCD –screen / stepping-motor-system With additional handbox for external use Ihodpefcyrlofx Ahvew mechanics of unit is rebuilt / new ball-screw with electronic sensor for automatic measuring of spiral lead including grinding menues for spiral, relief, face-end grinding warranty 1 year

Condition: not inspected (used), Year of construction: 2014, machine/vehicle number: 12097, CNC Milling Machine XYZ SMX3500 The machine is in very well-maintained condition. ● Condition: Not tested ● Delivery terms: Free loaded onto truck ● Location: 42477 Radevormwald ● Availability: By arrangement – The pick-up period for the goods is set for 06.05.2026 and 07.05.2026. Unfortunately, collection outside this period cannot be accommodated. ● Payment terms: Advance payment – by bank transfer ● Internal ref. no.: DÄ10 ● Power-on inspection possible: Yes ⚡️VIDEO: Coming soon Technical data: ● Control: PROTO TRAK SMX Iedpeyvi Enjfx Ahvohw ● Table dimensions: 1200 x 300 mm ● Spindle speed: 5000 rpm ● Main drive power: 3.75 kW ● 400 V ● 50 Hz Scope of delivery: ● Available manuals (completeness unclear) ● Hoffmann vise, jaw width: 1250 mm ● Machine lamp Dimensions & weights: ● Installation dimensions (L x W x H approx.): 2000 x 2000 x 2500 mm ● Weight approx.: 2500 kg If you have any questions or would like to arrange a viewing, please feel free to contact us! Additional information: ►Upon request, we can offer transport to your desired location ►The offer price is net, plus VAT ►The item is sold without any warranty ►Technical data subject to change without notice ►Subject to prior sale ❗The sale is exclusively to business customers❗

Condition: not inspected (used), Year of construction: 2014, machine/vehicle number: SL375, CNC Lathe XYZ SLX355 ● Condition: Not tested ● Delivery terms: Free loaded on truck ● Location: 42477 Radevormwald, Germany ● Availability: By arrangement – The collection period is set for 06.05.2026 and 07.05.2026. Collection outside of this timeframe unfortunately cannot be accommodated. ● Payment terms: Advance payment by bank transfer ● Internal ref. no.: DÄ5 ● Can be inspected under power: Yes ⚡️VIDEO: Coming soon Technical Specifications: ● Control: PROTO TRAK SLX ● Drive power: 5.5 kW ● Spindle speed: max. 4000 rpm ● Turning length approx.: 750 mm ● Swing over bed approx.: 400 mm ● Swing over cross slide approx.: 180-200 mm Equipment: ● 3-jaw chuck (diameter: 200 mm) ● Tailstock ● Quick-change tool post Scope of delivery: ● Existing manuals ● Set of quick-change tool holders with turning tools ● 4-jaw chuck (Röhm, diameter: 160 mm) ● Toolbox with accessories (as shown in photos) Dimensions & Weights: Ihjdpfx Ahjyvi A Tjvew ● Installation dimensions (L x W x H) approx.: 2300 x 1400 x 1900 mm ● Weight approx.: 2000 kg Should you have any questions or wish to arrange a viewing, please do not hesitate to contact us! Additional notes: ► We can offer transport to your desired destination upon request ► The offer price is net, plus VAT ► The goods are sold without any warranty ► Technical specifications are given without guarantee ► Prior sale reserved ❗Goods will only be sold to commercial customers❗

Condition: not inspected (used), functionality: unexamined, input voltage: 380 V, input frequency: 50 Hz, total height: 600 mm, total length: 700 mm, total width: 500 mm, overall weight: 150 kg, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates timely collection between 04/05/26 and 07/05/26. MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Dimensions & Weight Isdpfxjyr Nvwe Ahvohw Dimensions (L x W x H): 700 x 500 x 600 mm Machine weight: 150 kg External reference: Lot 78