Used Cut Line for sale (22,525)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, operating hours: 11,000 h, controller model: Sinumerik 840D, laser power: 2,700 W, sheet thickness steel (max.): 6 mm, sheet thickness aluminum (max.): 4 mm, working length: 6,500 mm, TruLaser Tube 5000 with Special Equipment: Laser TruFlow 2700 & SeamLine Tube! TECHNICAL DETAILS Laser Power: 2,700 W Maximum Sheet Thickness (Steel): 6 mm Maximum Sheet Thickness (Aluminum): 4 mm Working Area: 6,500 mm Ljdjyanr Tjpfx Ad Nehb MACHINE DETAILS Laser Type: TruFlow 2700 Control System: Sinumerik 840D Laser Operating Hours: 11,000 h EQUIPMENT - Documentation / Manual - Safety light curtain - Sturdy machine frame with integrated laser unit - CO2 laser TruFlow 2000, high-frequency excited, with cooling unit - Maintenance-free three-phase servo motors - NitroLine high-pressure cutting - SprintLine for rapid processing - Programmable cutting gas pressure control - Laser cutting head with 5 lenses - Quick-change device for the cutting head - Laser power control - Laser logbook function - Automatic shutdown - Workspace illumination - Multi-beam light curtains - Fully enclosed and ventilated beam guidance - Compact dust extractor - Protective enclosure - PRS 3001 discharge station with brush table - Set of clamping jaws D 20–85 mm and D 85–150 mm - 1 set of V-shaped form shells and guide rollers for round tubes - 1 set of U-shaped form shells and guide rollers for a circumscribed diameter of 120 mm - SeamLine Tube

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 22,600 h, machine/vehicle number: A0230A2187, laser power: 7,000 W, sheet thickness steel (max.): 25 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 116 mm, No minimum price – guaranteed sale to the highest bidder! TruLaser 5030 Laser Cutting Machine with Special Equipment TruFlow 7000! TECHNICAL DETAILS Laser power: 7,000 W Travel X-axis: 3,000 mm Travel Y-axis: 1,500 mm Travel Z-axis: 116 mm Max. sheet thickness (steel): 25 mm Max. sheet thickness (aluminum): 20 mm X-axis feed rate: 200 m/min Max. workpiece weight: 900 kg MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 11,100 x 4,600 x 2,600 mm Total weight: 12,000 kg Control system: SINUMERIK 840D Laser type: TruFlow 7000 Laser hours: 22,600 h EQUIPMENT • Enclosed machine frame with integrated laser unit • Motion unit for ultra-precise machining • Gantry drive combined with linear direct drives • Enclosed beam guidance • Single cutting head strategy • TFT color monitor • Longitudinal conveyor belt for small parts and scrap • Automatic pallet changer • Work area lighting • Positioning laser diode Ledpfoyanplsx Ad Njhb • Oil spray device • Piercline • FocusLine • NitroLine • PlasmaLine • CO2 Laser TruFlow • Maintenance-free turbo radial blower • Lens cutting head with 250 mm lens • Universal quick-change device (UTI) with bus connection • LensLine with condition monitoring • ControlLine: height control and sheet edge detection • Auto shut-off • ConturLine • FastLine • FlyLine • Microweld • USB interface • RJ-45 network connection • CE marking • Light barriers • Multi-chamber extraction system • Compact dust extraction unit • Complete operating manuals • Lens cleaning kit • Transport locks • Crosshairs/ measuring bridge

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 89N1160, cutting width (max.): 800 mm, insertion depth: 800 mm, overall weight: 900 kg, reverse speed: 70 mm/s, TECHNICAL DETAILS Cutting width: 800 mm Insertion depth: 800 mm Maximum operating height: 100 mm Pressing force: 180–2,700 daN Minimum cut without cover plate: 15 mm Minimum cut with cover plate: 50 mm Return speed: 70 mm/s MACHINE DETAILS Power consumption: 4.0 kVA Power supply: 400 V, 50 Hz, 2.6 A Control: 18.5" touchscreen Lodsycr Ikepfx Ad Nohb Program memory: 1,998 jobs Total cuts: 24,551 Weight: 900 kg Table: Stainless steel with air support EQUIPMENT 1× mounted POLAR 78 1× new POLAR 78 SKH-2, 960×110×11.7 mm Process visualization Hydraulic swinging angled cut LED cutting line indicator Air table Robust machine body Ultra-fast knife change with POLAR OptiKnife New spare knife

Condition: used, Year of construction: 2016, functionality: fully functional, Profi-Joint Shaper 2016 model 6000mm two stage press Includes PUR glue pump and applicator Price AUD$100,000 (excludes GST and taxes) Additional consideration: Saw dust extraction AUD$20,000 Lodpfxeyb Ui Io Ad Nohb

Condition: excellent (used), Year of construction: 2022, Foil Pie Line Rinc Rijkaart 5 wide The line is commissioned but we do not have customers for foil Pies 2022 Machine date only trials have been made on the machine. Lhodpfx Adjxu Duxj Nob Product Ø 110 mm round pie, 40 mm height – 5 products across – 125 prod/min, Filling weight approx.. 170 grams.

Condition: used, machine/vehicle number: 007924, Position 1: Panel Feeding and Loading BARBERAN-RFU-4-C-1700 Position 2: Brushing Machines BARBERAN-RFU-4-C-1700 Position 3: Calender BARBERAN-RFU-4-C-1700 Position 4: Gluing Machine BARBERAN-RFU-4-C-1700 Position 5: Continuous Cycle Presses BARBERAN-RFU-4-C-1700 Position 6: Panel Stacking and Offloading BARBERAN-RFU-4-C-1700 Lhedpowu Agcjfx Ad Nsb

Condition: excellent (used), Sale of 4 complete roll forming lines + 1 spare part. Production of spacers and glazing beads made of aluminum and stainless steel. Modernized lines: two equipped with servo motors, the remaining with cardan shaft drive. Lines feature automatic loading, cutting, high-frequency welding, as well as automatic collection and packaging. Individual lines can be purchased separately. Freely selectable cardan shaft-driven lines at a price of €42,000 per unit / 2 units available. Servo motor-driven lines at a price of €95,000 per unit Quantity: 2 units Lhjdjx Da A Rjpfx Ad Njb PRICES FOR A PACKAGE OF 4 LINES + ONE SPARE LINE Price: €299,000 – catalogue price Price: €199,000 – special offer valid until 31 December 2025 Patents valid until 2033 and the HELIMA brand can also be acquired.

Condition: like new (used), Manufacturer: AMADA Model: HFE M2 2204 8 AXESL Year of production: 2016 Serial number: HFE-M2-220.4 LK101025 Number of axes: 7 (8 AXESL configuration) Press force: 2,200 kN Length: 4,000 mm Safety system: AKAS III P (laser) Bending angle measurement: digital angle sensor Stroke: 'Long Stroke' (extended) Connected load: 20 kW Operating hours: 10,238 h Weight: 17,970 kg Lsdpfex Trw Iex Ad Njhb Dimensions (W x H x D): approx. 550 x 300 x 200 cm Additional equipment: Very large number of tools

Condition: like new (used), High-Quality Meltblown Production Line for Nonwovens A comprehensive machine inspection by the manufacturer's service department was carried out on 17 December 2025. Ledpfsx Hx Rnjx Ad Nshb Report to follow Operating hours: 80 hours (commissioning only) Price for a new machine: EUR 7,500,000 • Manufacturer: Reifenhäuser GmbH & Co. KG Maschinenfabrik • Model: Reicofil MB 1600 • Year of construction: 2021 • Last commissioning: 2022 Technical Specifications • Working width: 1,600 mm • Material: Polypropylene (PP), MFI 230 / 2.16 > 400 g/10 min • Output: Up to 65 kg/h per metre width • Product weight: 10–80 g/m² • Production speed: 5–80 m/min • Die head: MB 1600, 50 h/in • Extruder: RT-1101-1-100, L/D 30 • Heating capacity of rotary beam: 65–172 kW • Winding station: Contact winder with preset reel change • Maximum winding diameter: 1,250 mm • Web width: 1,700 mm • Winding tension: 10–100 N/m Additional Equipment and Accessories • 3-component dosing system • 80 mm seat changer • Ultrasonic cleaning system • Pyrolysis unit • Ozone extraction • Cutting knives • Central control panel with touchscreen and data input

Condition: excellent (used), A roll forming line with rollers for cold rolling office and storage cabinet fronts made of cold-rolled sheet metal. Roller center distance: 140 mm, Roller diameter: 45 mm, Keyway: 12 mm. The system features an electric mechanism for moving the roller sets apart by up to 1500 mm. The system is electrically operated. Lhodpfxswxv H Do Ad Nsb

Condition: new, functionality: fully functional, Year of construction: 2022, Laser Welder – IPG Photonics Model: YLR-1500-WC Serial Number: PLMP32200563 Power Supply: 200–240 VAC, 1-phase, 50/60 Hz Power Rating: 4500 VA Manufacturing Date: March 2022 2. Control Power Supply / Main Unit – IPG Photonics Model: SYSLC0000058U Serial Number: PD206000 Power Supply: 380–415 VAC Phases: 3P + N + PE Frequency: 50/60 Hz Full Load Current: 25 FLA Overcurrent Protection: 30 A SCCR (Short Circuit Current Rating): 10 kVA Circuit Diagram: DOCCHSDMPSXX0225 Manufacturing Date: September 2022 3. Chiller – IPG Photonics Model: LC71.01-A.4.5/6 Serial Number: PC220200019 Manufacturing Date: February 2022 Power Supply: 400/480 V, 3~ (3-phase), 50/60 Hz Overcurrent Protection: 30 A / Type 1 Short Circuit Protection: 50 kA Rated Full Load Current: 16/17 A Motor Current (Max Motor Load): M1 5.5 A Circuit Diagram: P35-001221 Lodpfx Adjwyb S Ie Nehb Cooling Capacity: 5.5 / 5.9 kW Refrigerant: R407-C, 2.2 kg Maximum Pressure working: 30 bar

Condition: ready for operation (used), controller manufacturer: Touch-L, laser power: 10,000 W, travel distance X-axis: 6,280 mm, travel distance Y-axis: 2,070 mm, total length: 17,200 mm, total width: 6,300 mm, total height: 3,360 mm, empty load weight: 21,500 kg, Gemonteerde opties: - automatische nozzlewisselaar - schroottransportband Workpiece dimensions: 6160 x 2035 mm Type of Laser: LVD Hight travel Z-axis: 130 mm Travel speed: 140 m/min Max cuttingthickness in steel: 25 mm Max cuttingthickness in Inox: 30 mm Lhodpfxjxqh Sgo Ad Neb Motor Power: 75 kW Shuttle table: yes

Condition: used, functionality: fully functional, Year of construction: 2007, Description AUTOMATION 4 Meter Processing - SheetMaster – Simultaneous loading and unloading during main operation time - GripMaster with scissor lift table - Twin carts for loading and unloading - Good part conveyor TECHNICAL DETAILS Travel paths X / Y: 4000 mm / 1550 mm Sheet thickness: 8 mm Punching force: 220 kN Active hold-down force: 4.5 – 20 kN Workpiece weight: 200 kg Control: Siemens Sinumerik 840D Part flap: 500 x 500 mm Speed X / Y / simultaneous: 100 / 60 / 116 m/min C-axis: 500 rpm Stroke rate punching / marking: 1600 / 3000 strokes/min Positioning deviation Pa: ±0.1 mm Position scatter Ps: ±0.03 mm Linear magazine: 21 tools with 3 clamps Tool change time single tool / multitool: 3 / 0.3 s EQUIPMENT Ledpfx Adjycv S Te Nehb - Robust, easily accessible C-frame - Movable ball roller tables - Linear magazine for tool stations and clamps - Foot switch for closing clamps - Good part container - Hydraulic single-tool holder, 360° rotation - Manually adjustable hold-down force - Programmable hold-down – active/passive/follow-up - Spray lubrication for punches - Punch slug extraction - Level monitoring for thread forming and tool lubrication - CE marking - Multi-beam light barriers - Emergency hydraulic shut-off - Warping detection

Condition: ready for operation (used), Year of construction: 2012, product length (max.): 2,250 mm, This Hüttenhölscher Line multi-spindle drilling machine was manufactured in 2012. It features a PC-controlled function sequence under Windows 7 with TwinCAT, a 6-station loading gantry, and a 2-axis gantry robot. The machine includes a vacuum generation by ejector and multiple conveyor lines for efficient material handling. Ideal for high precision drilling with its advanced control system. Contact us for more information about this machine. • Control: PC-controlled function sequence under Windows 7, TwinCAT • Part dimensions: Ledpfx Aeyctauod Nshb • Length: 300–2250 mm • Width: 350–710 mm • Thickness: 16–25 mm • 2-station drilling station: • Base frame as welded construction with machined screw-on surfaces • 2x toothed belt conveyors V = 1.5 m/sec • 2x pneumatic lift for toothed belt conveyors • 2x stoppers for cabinet parts, dampened by shock absorbers • 2x pneumatic double clamping cylinders, controlled by ball screw and servo motor, moved to side height (measuring the side height) • 2x pneumatic cross alignment ruler (plausibility check) • 2x vacuum clamping units in the drilling machine table • 2x 0-line controllable • Support: • Support can be moved in the X direction by means of a servomotor • 2x drilling gear (support 1): • Support equipped with 2 units (machining from above) • Individually movable in Y direction by servomotor • Individually movable in Z direction by servomotor • Drilling gear a = 32 mm, adjustable with frequency converter, drill chuck Ø 10h7 with grub screw • Callable spindles, 8000 rpm • Two 16-spindle drilling gears • Groove saw (support 1): • Sawing units for cutting special rear wall grooves • Sawing unit with tool holder, speed control via frequency converter • Pneumatically pilot-controlled working position • 2x milling spindles right/left at the front edge (support 1): • Pneumatically pilot-controlled working position Additional equipment (automation, handling, guarding, conveyors) • Loading/handling: • 6-station loading gantry • 2-axis gantry robot; Y/Z axes with servo motors; travel distances: Y-axis 8500 mm, Z-axis 1500 mm • Suction crossbeam with four-circuit vacuum supply; vacuum generation by ejector • Double part detection • Portal supports • 4 stacking stations • 1 hand rest station (automatic/manual feeding) • 1 removal station (automatic/manual removal) • Side feed range: • Stack height: max. 1000 mm (60 parts) incl. protective plate • Protective plate sizes: • 1380 mm x 780 mm • 1220 mm x 720 mm • 1120 mm x 620 mm • 2290 mm x 620 mm • Thickness: 25 mm • Thickness: max. 28 kg • Floor roller conveyor / stack feed: • 4 roller conveyor lines, 930 mm wide x 3600 mm long, AH 300 mm • Feeding/removal: manual cross transfer carriage • Support stations / automatic feeding: • Transport section 950 mm wide x 4100 mm long; integrated side stop • Manual feeding: • Toothed belt section 900 mm wide x 2500 mm long • Transfer shuttle: • Toothed belt section 900 mm wide x 2500 mm long; horizontal stroke approx. 2500 mm by three-phase motor • Return: • Transport section 950 mm wide x 4000 mm long; pneumatic stopper • 90° rotary unit: • Vacuum suction cup; pneumatic stroke; rotation by three-phase motor by +/- 90° • Discharge stations / automatic removal: • Transport 950 mm wide x 3000 mm long; positioning of cabinet parts by encoder • Manual removal: • Toothed belt section 900 mm wide x 3000 mm long • Protective system for feeding: • 45 m protective fence with 3 access doors

Condition: not inspected (used), functionality: unexamined, Year of construction: 2009, operating hours: 69,572 h, machine/vehicle number: 28510308, sheet thickness (max.): 20 mm, table height: 940 mm, travel distance X-axis: 3,270 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 100 mm, No Reserve Price – Guaranteed Sale to the Highest Bidder! Auction of an Amada Laser Cutting System + Storage Tower! Placing a bid obligates the buyer to collect the equipment within the specified period: from March 23, 2026, to March 27, 2026! AMADA LC-3015 F1 NT TECHNICAL DETAILS Travel X-Axis: 3,270 mm Travel Y-Axis: 1,550 mm Travel Z-Axis: 100 mm Travel B-Axis: 21 mm Cutting Area X-Axis: 3,070 mm Cutting Area Y-Axis: 1,550 mm Cutting Area Z-Axis: 100 mm Cutting Speed X/Y: 0 – 60 m/min Rapid Traverse X/Y/Z: up to 120 m/min Table Height: 940 mm Workpiece Weight: 920 kg Mild Steel Thickness: up to 20 mm Stainless Steel Thickness: up to 12 mm Aluminum Thickness: up to 10 mm MACHINE DETAILS Control: AMNC-F Control Type: Path Control Controlled Axes: X, Y, Z, B Simultaneously Controlled Axes: X, Y, Z Laser Model: FANUC AF4000i-B Laser Type: CO₂ Laser Laser Class: 4 Laser Radiation: invisible Laser Principle: AC-HF excited, fast axial flow Rated Power: 4,000 W Max. Power: 4,000 W Lhsdpfx Adsycqfue Nob Peak Power: 5,000 W Stability: ±2% Frequency Range: 5 – 2,000 Hz Pulse Duty Cycle: 0 – 100% Wavelength: 10.6 µm Laser Beam Diameter (Output): 27 mm Laser Beam Divergence: < 2 mrad Cooling & Supply Cooling Water Flow Rate: > 160 l/h Power Supply: 55 kVA Positioning Laser Laser Class: 3R Laser Radiation: visible Rated Power: < 5 mW Pulse Duration: CW Wavelength: 0.6 – 0.7 µm Laser Medium: Semiconductor or HeNe Drive Type: Linear Drives Cutting Gas Control: automatic Machine Weight: approx. 11,000 kg Storage Tower ASLUL 300 F1 (Year of manufacture 2009) TECHNICAL DETAILS Cycle Time: approx. 3 min Pallet Change Time: approx. 50 s Raw Sheet / Unloading Pallets: 2 + 4 or 3 + 3 Pallet Weight: max. 3,000 kg Sheet Size: max. 3,000 × 1,500 mm Sheet Size: min. 2,000 × 1,000 mm Material Thicknesses Automatic Mode: 0.8 – 20 mm Shuttle Mode: 0.8 – 25 mm Load Data Sheet Weight: max. 920 kg Load on Cutting Pallet: max. 920 kg Stack Heights Raw Sheet Pallet Stack Height: max. 150 mm Unloading Pallet Stack Height: max. 220 mm Finished Part Size Finished Part Size (X × Y), free cut: min. 225 × 180 mm MACHINE DETAILS PLC: Mitsubishi Q Series Operator Interface: Beijer E1060 Dimensions & Weight Dimensions (L x W x H): approx. 4,630 x 4,225 x 6,000 mm Total Weight: approx. 11,000 kg EQUIPMENT Double Sheet Detection Note: The power supply displays an error message and may be faulty.

Condition: like new (used), Year of construction: 2018, operating hours: 900 h, Lectra IQ80 cutting machine, year 2018, max cutting thickness 8 cm, working width 180 cm, 900 operating hours. Machine in excellent condition. Ledpfoycqctjx Ad Njhb

Condition: like new (used), Year of construction: 2018, operating hours: 600 h, Lectra Q25 cutting machine, year 2018, max cutting thickness 2.5 cm, working width 170 cm, operating hours: 600. The machine is in excellent condition. Ledeycp Syopfx Ad Nshb

Condition: good (used), Year of construction: 2005, Used fabric cutting machine Lectra Vector 2500 V3 Fashion, year 2005- hours worked 7100 - cutting window useful width170 cm - cutting thickness 2.5 cm - new computer with installed window 10, kit 4000 hours performed 1 year ago - in good condition. Immediate availability. Lodpfx Ast Ipk Sod Nehb Price € 22,000.00

Condition: good (used), Year of construction: 2005, Used cutting machine Lectra Vector 5000 Fashion V3 - year 2005 - Useful cutting width 180 cm. - translating - new inverter device - in good condition. Ljdpfx Ajrtnccjd Nehb

Condition: used, Year of construction: 2014, controller manufacturer: Sonstige, controller model: Beckhoff TwinCAT CNC, _____ Description: Year of manuf. : 2014 travel distances X-axis:3,060 mm Y-axis:1,540 mm Z-axis:100 mm Laser Laser source:4 kW IPG new modules received in 2024 Cutting head:replaced in 2024 Mechanics & Performance Cutting speed:up to 150 m/min Positioning speed:up to 350 m/min Acceleration:6 G Driven axes:Linear suction :Dimensions & Weight Dimensions & Weight Machine dimensions (L × W × H):10,000 × 3,080 × 3,060 mm Weight:approx. 18 t Equipment Longitudinal conveyor belt for scrap:available Maximum cutting thicknesses mild steel:20 mm stainless steel:20 mm aluminium:15 mm Lsdpfoycngcjx Ad Nehb brass:8 mm copper:6 mm

Year of construction: 2004, condition: used, table length 1250 mm table width 1250 mm burner heads 1 Ljdpfx Aehly Hled Nshb Control Fanuc output 1000 Watt travel -z axis 100 mm travel x / y 1260/1260 mm traversing speed 30/30/42 mm/sec gas consuption 10 Liter/Std. total power requirement 22 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 10 m

Condition: ready for operation (used), Fabrication line for production of metal racks 14 stations: double driven Axle Ø 80 mm station lt;- station: 400 mm adjustable centerdistance axles: min 100mm; max 280mm max feedingwidth: 780 mm max thickness: 3 mm steel Including: - Colombo excenter Press 100 ton for punching Stroke: 150 mm 16.5 hp Table: 600 x 1000 mm Stroke/min: adjustable from 30 - 90 str/ min - 4 column press on rails acting as flying shear Table 400 x 400 mm - Unloading table Lhedpfx Adjycmqmj Neb Work mode: Roll forming unit Material thickness x width: W 780 mm Max Numbre of sections: 14 stations axle Ø80mm PUNCHING MACHINE: Punching press CUTTING DEVICE: Flying Shear Conveyor: Yes

Condition: used, Number of machnines 9 Stk. Wooden window production line for sale on behalf of a customer. Machines still in operation can be viewed. Sale includes machines, tools, and programming of the systems produced. Ledpfjyclwxox Ad Nohb Includes angled window and arched window production. Item 1: Weinig Powermat 500, year of manufacture 2010, window version ----- - ??6 spindles, 5 of which are PowerLock - 8,000 rpm - Equipment for glazing bead removal - Large PowerCom control system - Includes existing Leitz planing and molding tools - Linked to a Maweg Saturn Duo single-piece wood sander, year of manufacture 1985, and a workpiece return conveyor system Item 2: SCM Windor 40 R window system, year of manufacture 2006 ----- - 2 long CNC-controlled slotting spindles - 3 long CNC-controlled profile spindles + top and bottom unit - Rebating carriage for small sashes - ROTATEN: Angled window attachment - Includes Leitz window and door tools - Includes separate OKOMA UF 3 rebating machine with tools Item 3: HOMAG CNC machining center BMG310/42/F/K, year of manufacture 2018 ----- - Gantry machine, 5-axis Drive 5C+ with 15 kW - Ceiling laser - Working dimensions 4200 mm length, 1350 mm depth - 32-position disc changer - 8-position linear changer - Fixed drilling head with 18 spindles V12/H6/S0/90 degrees - 8 consoles - 6 lifting rails - Connection for 8 PowerClamp clamps - Approx. 30 vacuum clamps - 4 x PowerClamp clamps - WoodWop - Chip conveyor belt - Various small solid wood clamps, used for casement windows - Including Leitz tools for Homag with arched window production - Including Barbaric vacuum lifter, year of manufacture 2015 Item 4: Löwer MZP 1 mini dovetail press ----- - ??For arched window production Item 5: S+S frame press type Bavaria 200 L, year of manufacture 2014 ----- - Working dimensions 4000 x 2600 mm - With center pressure beam and cross pressure device - Motorized width adjustment - Basic equipment counter profiles - Slanted window control - Pendulum pressure plates + extension for pointed windows - Intermediate insert for small-scale crimping - Various carrier plates for counter profiles and counter profiles Item 6: Striffler sash fitting table ----- - With automatic screwdriver and screw feeder - Fitting rack - Punch for Roto fitting Item 7: Stegherr KF counter milling machine ----- - With existing tools Item 8: Tools ----- All tools belonging to the machines for the wood+wood-aluminum systems IV 72 + 92 mm shown in the PDF - Windows - Lift-and-slide doors - Round and angled windows - Box windows - Entrance doors in many variations - Putty rebate variations - ... Sale of the tools in their current condition, scope, and with accessories as they are currently available. Note regarding window cuts, tool drawings, and tool system listings: Engelfried GmbH does not guarantee that the tools actually present correspond to the systems listed and drawn. (Technical specifications according to the manufacturer, without guarantee!) -----...

Condition: like new (used), Year of construction: 2023, x-travel 4216,0 mm y-travel 2007,0 mm z-travel 305,0 mm control CNC table-size 4902,0 x 2134,0 mm max. workpiece weight 1465 kg / m² machine weight ab. 2500 kg total power requirement 30 kW dimensions of the machine ca. 5486,0 x 3708,0 mm The compact waterjet cutting system in bridge design consists of a torsion-resistant Lsdpeyclvnsfx Ad Nohb torsion-resistant steel construction, which is coated with a special durable anti-corrosion coating. coating. Both the two X-axes and the particularly high Y-axis are based on the Y-axis are based on the maintenance-free design specially developed by OMAX for the special requirements of a waterjet cutting system. specially developed by OMAX for the special requirements of a waterjet cutting system. Equipment: - Motorized Z-axis - Water level control - Abrasive system with AFS 1000 abrasive conveyor system - High-pressure system with special stainless steel high-pressure pipes - MAXIEM direct pump M4050 - OMAX Intelli-MAX PC control software for MAXIEM - OMAX PC control software Intelli-MAX Premium - Cutting head technology based on the A-Jet 5-axis angular cutting head - Height sensor for the A-Jet 5-axis angle cutting head - Laser pointer as a positioning aid - Automatic desludging system MBM ASAS-ME - Compressed air injection for the MBM ASAS-ME automatic desludging system - Clamping and fastening set for sheet material and material holders - Collecting grid in the cutting basin - Sensors for automatic monitoring of the cutting process - Water treatment through water conditioning incl. water analysis - Omni-Start drilling aid (Vacuum Assist) for brittle and laminated materials

Condition: excellent (used), functionality: fully functional, Cross-cut multi-blade saw for the production of squared timber and turning blanks Lhedpjych N Defx Ad Nob