Used Ctx 310 Eco for sale (8,426)

Condition: used, Three-jaw Chuck Make Mundorf Diameter 315 mm Ksdpfx Aeddzhrsh Njdg Type 2b 60 kd

Condition: used, Luenette Height without foot 290 mm Kdjdpfx Ajcrcxtjh Njg Foot width 50 mm Distance 170 mm

Condition: new, machine/vehicle number: e7fbe178b85a202cade7e95af, empty load weight: 5 kg, maximum load weight: 22 kg, overall weight: 29 kg, axle configuration: 2 axles, tire size: 235 / 75 r 17,5, Further information Chassis saddle forwarding Welded fine-grained steel construction, saddle plate with replaceable 2 king pins, with 2 king pin positions Slightly angled outer frame with load-lock profile for attaching lashing strapsNote! To attach the straps in conjunction with drop sides, the drop sides must be opened! 2 pairs of lashing eyes embedded in the outer frame on gooseneck, 5 tons each 8 pairs of lashing eyes embedded in the outer frame in the low bed, 5 tons each 24 to. 2-speed support winch, single-side operation, with straight lower section, without thrust compensation 2 wheel chocks with holder Aluminum side bumper Steel underride guard Quarter-shell mudguards in front of and behind axle unit 2 Stainless steel stowage box, w=600/h=400/t=500 mm, with polished door, lockable 2 pairs of stake pockets recessed in the outer frame on gooseneck, 70 x 40 mm internal dimensions 6 pairs of stanchion pockets in the outer frame recessed in the deep bed, 70 x 40 mm Internal dimension!!! Internal width between the stanchions 2420 mm!!! 3 lashing/stanchion rails in the drop-down bed, embedded transversely in the floor across the entire width up to the outer frame (max. usable internal width between the outer stanchions approx. 2170 mm), approx. 100 mm high. With 20 mm round steel slats, top and bottom, distance from top to bottom approx. 60 mm (of the round steel). For lashing and inserting stanchions 80 x 80 mm. Piece of stanchions W=80/ D=50/ L=1200 mm, hot-dip galvanized Piece of stanchions W=80/ D=80/ L=1200 mm, hot-dip galvanized Note: Stanchion pockets / stanchions are not designed for securing long material, pipes etc. on their own without wrapping around them. Mechanical rear extension with hand crank, can be extended by approx. 1,500 mm, can be locked every 500 mm, with support beam, can be loaded with 2000 kg over the entire width at the load center of gravity at approx. 500 mm, can be loaded with 1000 kg over the entire width at 1000 mm and can be loaded with 500 kg over the entire width at 1500 mm, incl. extendable underride guard with lighting, 2 pairs of stanchions W=80/ D=80/ L=1200 mm, hot-dip galvanized Open storage compartment for stanchions, on the front wall or underneath the loading area (for 10 stanchions 80 x 50 x 1200 mm and 4 stanchions 80 x 80 x 1200 mm) Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption last axle self-steering, with automatic reversing lock via reversing light, and additional locking function on the vehicle via hand button. Air suspension with lift & lower valve Wheels and tires 235 / 75 R 17,5 at the manufacturer's choice Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 non-interchangeable clutch heads at the front, without connecting cable EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Axle load detection via EBS-Canbus signal, for indication via display in the cab, truck must be prepared accordingly, no truck installation (no calibrated scales). Electrical system 24 volt, multi-chamber lights, amber LED lighting on the side 2 white position lights at the front Kodpei Ri Hvsfx Ah Nodg 2 white/red rear lane departure lights 2 x 7-pin sockets at the front, without connecting cable 2 additional LED work lights, at the rear, switched via reversing light 1

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 2575, workpiece weight (max.): 500 kg, total height: 2,620 mm, total width: 2,320 mm, total length: 1,600 mm, table width: 550 mm, type of input current: three-phase, table length: 350 mm, warranty duration: 1 months, feed length X-axis: 350 mm, feed length Y-axis: 270 mm, feed length Z-axis: 270 mm, feed rate Y-axis: 5 m/min, feed rate Z-axis: 10 m/min, input voltage: 400 V, overall weight: 1,700 kg, year of last overhaul: 2024, table load: 500 kg, input frequency: 50 Hz, tank capacity: 400 l, Equipment: documentation/manual, Machine Exeron EDM 310 s.n.2575 year 2008 (general reparation in 12/2024) Configuration of machine: EDM Generator EroForm – 60A with APF Rotation tool changer with 20 positions C-box for hardmetal Heat exchanger for external cooling water Ksdpfx Asyanuboh Nodg Pneumatic Chuck Erowa(installed) or Hirschmann

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, machine/vehicle number: V00311, working width: 1,100 mm, total length: 4,581 mm, total width: 1,093 mm, total height: 1,372 mm, input frequency: 63 Hz, workpiece weight (max.): 2,500 kg, ECO-63 was designed for bending round, square and oval tubes and profiles. The standard programming of the ECO-63 comand comprises 15 different programs, each one, Kodpswczf Hefx Ah Njdg comprising up to 15 different angles.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 17 kVA, torque: 83 Nm, controller manufacturer: Heidenhain, controller model: Heidenhain TNC 620, total height: 2,665 mm, total length: 3,250 mm, total width: 2,779 mm, table width: 560 mm, table length: 1,200 mm, table load: 720 kg, overall weight: 4,100 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 9,000 rpm, number of spindles: 1, number of slots in tool magazine: 20, tool length: 300 mm, tool diameter: 80 mm, tool weight: 6,000 g, Equipment: documentation/manual, rotational speed infinitely variable, Used DMC 1035 V eco for sale – High-performance vertical machining center Upgrade your manufacturing processes with this robust and powerful DMC 1035 V eco from DMG MORI! This vertical machining center is ideal for a wide range of milling tasks and offers outstanding performance when machining a wide variety of materials. Key Features: High rigidity and stability: Ensures precise machining results and a long service life. Large work area: Provides sufficient space for machining large workpieces. High spindle speed: Enables fast and efficient machining processes. Robust construction: Guarantees a long service life and reliable performance. CNC control: Equipped with a user-friendly CNC control for easy programming and operation. Additional Information: Year of Manufacture: 2010 Condition: Good, Used Control: Heidenhain TNC 620 Travel Range: 1,035 x 560 x 510 mm Speeds: 20 - 9,000 rpm Ideal for: General Machining Tool and Mold Making Single-Part and Small-Batch Production Mechanical Engineering Kedpfox Tg S Tsx Ah Nsdg Why this DMC 1035 V eco? This machine has been regularly serviced and is in good used condition. It offers a cost-effective way to expand your manufacturing capacity and increase your productivity.

Condition: excellent (used), Year of construction: 2015, Demag Systec 100/420-310 (2015) Panel: NC5 Clamping force: 100 t Screw diameter: 30 mm Distance between tie bars V: 420 mm Distance between tie bars H: 420 mm Type: Horizontal Drive: Hydraulic Kdodpfx Asx Tdwyeh Nog Possible to buy Wittmann W818 Linear robot Z= 1500mm

Condition: excellent (used), Year of construction: 2015, clamping force: 1,000 kN, Clamping force: 100 t Screw diameter: 30 mm Distance between tie bars V: 420 mm Distance between tie bars H: 420 mm Type: Horizontal Drive: Hydraulic extra equipment: Ksdpfx Ahsx Tdp Nj Nedg 1. 2 hydraulic core pull circuits on moving platen (proportional valves) 2. Additional connections for 2 core pulls on fixed platen 3. Pneumatic core pull (2 circuits) on moving platen 4. 4-zone cooling water flow controller with temperature display 5. Compressed air blow valves on fixed and moving platens (programmable) 6. Integrated hot runner control, 8 zones 7. Interfaces for external nozzle heating bands 8. Interface for integrated temperature control units (up to 6 circuits) 9. Interface for mould temperature monitoring (2 circuits) 10. EUROMAP 67 for automation equipment

Condition: like new (used), Year of construction: 2022, As-new condition (only 5,000 m² of parquet processed so far), compact oil application line consisting of: Roller Application Unit: - For the application of oils, etc. - Touchscreen control - Manual height adjustment - Max. working width: 300 mm - Max. workpiece height: 50 mm - Membrane pump with max. capacity of 18 l/min - Frequency inverter for variable speed of application roller - Frequency inverter for variable speed of counter-roller - Conveyor belt speed adjustable: 3 to 14 m/min - Stainless steel recovery trays Pad Group + Brush Group: - For spreading and removing excess oils - Touchscreen control - Manual height adjustment - Conveyor belt speed adjustable: 3 to 14 m/min - Max. working width: 300 mm - Max. workpiece height: 50 mm - Pad diameter: 300 mm - Quick-change system for pads - Brush dimensions (L x D): 300 x 160 mm - Quick-change system for brushes UV / LED Unit: - Touchscreen control - Manual height adjustment - Max. working width: 300 mm - Max. workpiece height: 50 mm - UV-LED power: 12 Watt/cm² - Incl. ventilation fan - Conveyor belt made of Kevlar fabric - Conveyor belt speed adjustable: 3 to 14 m/min Outfeed Conveyor Belt: - Length: approx. 2,500 mm - Max. working width: 300 mm - Conveyor belt speed adjustable: 3 to 14 m/min Note for used machinery: • Technical details and prior sale subject to change and errors. • Stated prices are ex works - free loading! Kdjdpex Ah A Asfx Ah Nsg • The machine has been cleaned and functionally tested. • All machines are sold as inspected, without any warranty claims. Buyers are free to inspect the machine at its location. • Special agreements are only valid in written form. (We only respond to enquiries with your address and telephone number!)

Condition: refurbished (used), Year of construction: 2014, operating hours: 6,185 h, load capacity: 1,000 kg, fuel type: electric, mast type: simplex, construction height: 1,400 mm, Mast data Ksdpfxewzunxj Ah Nedg

Condition: new, Year of construction: 2024, cutting range round steel at 45°: 108 mm, cutting range round steel at 90°: 108 mm, cutting height (max.): 150 mm, BERG+SCHMID GBS 218 Eco AutoCut double mitre bandsaw Speed: 25-80 m/min - Mitre left 60° - For cutting steel, stainless steel and aluminum profiles - Quick-clamping vice with quick-clamping device a. - Built-in blade tension control b. - Saw blade guide made of carbide c. Kedpfx Ast I R Edoh Nodg - Electric automatic cooling system - Machine base (supplied disassembled) The AutoCut system consists of: - Hydraulic cylinder, feed control, spring assembly, limit switch and enables three work sequences: 1. automatic lowering of the saw frame via hydraulic cylinder with infinitely adjustable feed control valve and limit switch at the end of the cut 2. high-speed lowering of the saw frame from the rest position up to the workpiece, then switching to normal saw feed 3. manual operation - hydraulic cylinder works as a brake cylinder Saw blade dimensions: 2455x27x0.9mm Further accessories such as saw bands, roller conveyors, measuring stops, minimum quantity lubrication etc. available on request! Delivery time: ex stock Waiblingen Beinstein

Condition: used, mileage: 95,745 km, power: 70 kW (95.17 HP), first registration: 06/2011, fuel type: diesel, empty load weight: 2,550 kg, maximum load weight: 950 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 4,325 mm, fuel: diesel, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 7,057 mm, loading space length: 4,380 mm, loading space width: 2,000 mm, loading space height: 2,000 mm, Year of construction: 2011, construction height: 2,690 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, traction control, Purchase or trade-in of: - Transporters - Forklifts - Commercial vehicles Kdjdpeyaib Njfx Ah Neg - Specialized vehicles - Fleets Other services: - Various loading options - Registration service - Delivery available within Germany for an additional charge Viewings possible without prior appointment: Mon. - Fri.: 08:00 to 17:00 Sat.: 09:00 to 14:00 Address: Hauptstr. 90 76865 Rohrbach (Pfalz) Tel.: E-mail: For further information, please visit We speak German / English / Russian / Italian / French / Spanish More information Sales exclusively to businesses (agriculture, freelancers, small and large enterprises) or for export. Subject to errors and prior sale.

Year of construction: 2015, operating hours: 1,100 h, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 21932 Specifications: Year: 2015 Hours: approx. 1100 (may increase) Weight: 26,500 kg Power: 54 kW Hopper: 6 m³ Central lubrication Remote control Single owner 3 tires Service history available Ready for delivery Description:Well-maintained Keestrack screening plant with only 1100 hours. The machine has run only 1100 hours, but the hours may increase. The machine has had a single owner, and full service history is available. Hours: 1100 Own weight: 26500 Kw: 54 Kdodpfx Ahsx Anbfj Neg Model: Combo Eco Sorteringsverk. 1100 timer! SE VIDEO

Year of construction: 2022, condition: used, Serial number: ecxxxx Please contact ATS Norway for more information Kdodexq Dmyopfx Ah Nsg Please provide reference number upon request: 21648 Description: We have an Eco-clipper ec-gen lawn mower for sale. The full cutting width of this mower is 6.15 metres. Efficient mowing machine designed for professional use on large areas. Works well even in wet conditions. Ready for delivery Model: ec-gen gressklipper

Condition: as good as new (ex-display), Year of construction: 2025, The machine is on display. Optimill F110 ECO Premium CNC milling machine, direct from the manufacturer. F110 ECO – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control stands out for its performance, speed, precision, and long service life. Kdodpfx Ahew Edbpe Njg Model: F110 ECO Control: SIEMENS SINUMERIK 828D PPU271.5 Milling spindle with belt drive Machine Specifications Electrical connection: 400 V / ~50 Hz Total connected load: 15 kVA Milling Spindle Drive motor S1 operation: 7.5 kW Torque of drive motor S1 operation: 45 Nm Drive motor S6 30% operation: 16.2 kW Torque of drive motor S6 30% operation: 103 Nm Spindle taper: BT40 Coolant System Coolant pump output: 900 W Max. flow rate: 35 l/min Tank capacity: 116 liters Cleaning pump Milling Precision Repeatability: 0.008 mm Positioning accuracy: 0.004 mm Tool Changer Type: Double-arm gripper Number of tool stations: 20 Max. tool diameter: 78 mm Max. tool diameter (neighboring tool pockets empty): 120 mm Tool length: 300 mm Max. tool weight: 8 kg Tool change time, tool-to-tool: 2.5 seconds Travel (Axis Movement) X-axis: 650 mm Y-axis: 400 mm Z-axis: 500 mm Feed Drive Rapid traverse X, Y, Z-axis: 48 / 48 / 32 m/min Motor Torque X / Y / Z-axis: 11 Nm / 11 Nm / 20 Nm Feed Forces X / Y / Z-axis: 3.67 kN / 3.67 kN / 6.68 kN Spindle Speed Range Speeds*: 8,000 rpm Pneumatics Compressed air: 6 bar Air consumption per hour: 6–8 kg/m³ Milling Table Distance spindle to table: 100–600 mm Table length x width: 800 x 400 mm T-slot size / number / pitch: 18 mm / 3 / 100 mm Max. payload: 400 kg Dimensions Length x width x height: 2,100 x 2,300 x 2,750 mm Total weight: 4,300 kg Equipment Linear guides with ball screw drive for high rapid traverse speeds on all axes Telescopic guideway covers on all three axes Automatic lubrication system Portable electronic handwheel with enabling switch and emergency stop button RJ45 interface and 230 V power outlet Work area machine lamp Cleaning pistol Ball screws and linear guides from THK Chip flushing system Cooling at the spindle head (machining area) Control cabinet Arm-type tool changer SW24 CE *More options available

Condition: as good as new (ex-display), Year of construction: 2025, The machine is currently on display. Optimill F200 ECO Premium CNC Milling Machine—direct from the manufacturer. F200 ECO – The OPTIMUM Premium CNC Milling Machine with Siemens SINUMERIK 828D Control stands out for its performance, speed, precision, and long service life. Model: F200 ECO Control: SIEMENS SINUMERIK 828D PPU271.5 Milling Spindle: Belt Drive Machine Specifications Electrical connection: 400 V / ~50 Hz Total connected load: 15 kVA Milling Spindle Drive motor S1 operation: 9 kW Drive motor torque S1 operation: 57 Nm Drive motor S6 30% operation: 17.1 kW Drive motor torque S6 30% operation: 118 Nm Spindle taper: BT40 Coolant System Coolant pump power: 900 W Max. delivery rate: 35 l/min Tank capacity: 116 liters Flushing pump Milling Precision Repeatability: 0.008 mm Positioning accuracy: 0.004 mm Tool Changer Type: Double-arm gripper Number of tool stations: 20 Max. tool diameter: 78 mm Max. tool diameter (adjacent stations empty): 120 mm Tool length: 300 mm Max. tool weight: 8 kg Tool change time, tool-to-tool: 2.5 seconds Travel X-axis: 850 mm Y-axis: 500 mm Z-axis: 550 mm Feed Drive Rapid feed, X-/Y-/Z-axis: 48 / 48 / 48 m/min Motor Torque X / Y / Z-axis: 16 Nm / 16 Nm / 20 Nm Feed Forces X / Y / Z-axis: 5,34 kN / 5,34 kN / 6,68 kN Speed Range Spindle speed*: 10,000 rpm Pneumatics Compressed air: 6 bar Air consumption per hour: 6 – 8 kg/m³ Milling Table Spindle-to-table distance: 100 – 650 mm Table length × width: 1000 × 500 mm T-slot size / number / spacing: 18 mm / 5 / 100 mm Maximum load capacity: 500 kg Dimensions Length × width × height: 2,400 × 2,355 × 2,860 mm Kdjdpfoxyh Dbox Ah Njg Total weight: 5,500 kg Equipment • Linear guides with ball screw for high rapid traverse speeds on all axes • Telescopic guideway covers on all three axes • Automatic lubrication • Portable electronic handwheel with enabling switch and emergency stop • RJ45 port and 230 V power outlet • Machine lamp in work area • Cleaning blow gun • Ball screws and linear guides from THK • Chip flushing system • Cooling at the spindle head (machining area) • Control cabinet • Arm-type tool changer • SW24 • CE compliant *More options available

Condition: used, Year of construction: 2008, functionality: fully functional, Used HAAS rotary table model HRT310 complete with HAAS pneumatic drive and tailstock. Ksdpswu Uahsfx Ah Nsdg

Condition: used, mileage: 32 km, power: 96 kW (130.52 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,100 kg, first registration: 06/2024, emission class: euro6, color: white, number of seats: 9, total width: 2,474 mm, total height: 2,526 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Internal number: 83282---- Subject to errors and prior sale! SPECIAL EQUIPMENT * Air conditioning front and rear - including water heating rear - including dust and pollen filter * Seats in the passenger compartment: seat backrests with adjustable inclination * Seat package 15: Driver's seat adjustable in 4 ways - Double passenger seat with storage compartment under individually foldable seat cushions - Height-adjustable headrests - Tray integrated in the double passenger seat (foldable) - Seat heating for driver - Seat heating for passenger - Inside armrest for driver - Manual lumbar support (driver's seat) - Seat cover: fabric * Technology package 10: Heated windscreen - Windscreen wipers with rain sensor - Parking pilot system front and rear - Emergency brake assistant, active (camera-based) - Lane assistant with fatigue warning and high beam assistant, additionally with lane keeping assistant - Headlight assistant with day/night sensor - Cruise control - Rear view camera with image transmission of the rear path in the multi-function display - LED downlight - Fog lights - Ford Audiosyst. with 4 inch multifunction display OTHER EQUIPMENT * 1 battery * Airbag on driver and passenger side * ABS with electronic brake force distribution - ESP with traction control - Hill start assist - Crosswind assist - Safety brake assist - Rollover protection - Emergency brake support including emergency brake light * Electrically adjustable and heated exterior mirrors - with integrated indicators * Battery: battery life, battery life programmed to 10 minutes * Rubberized floor (in driver's cab and passenger compartment) * On-board computer with consumption and mileage information (e.g. remaining range) as well as outside temperature display and Ford ECO mode * Complete roof liner * Double-wing rear door with 180° opening angle (with window) - with heated rear windows, rear window wiper including window washer nozzle and automatic activation when reverse gear is engaged * Passenger compartment lighting with delay circuit * Window, 2nd row: side windows fixed, right * Front window lifter electric * Ford Easy Fuel - comfort tank cap and misfuelling protection * Generator, high-performance version * Glove compartment with lid, lockable * Interior lighting with delay circuit with reading lights at the front * Fuel tank 70 l * Steering wheel: leatherette steering wheel * Steering column, adjustable in height and reach * MyKey key system - individually programmable second key * Emergency call assistant * Package: Technology package 9 - heated windscreen - windscreen wipers with rain sensor - parking pilot system front and rear - emergency brake assistant, active (camera-based) - lane assistant with fatigue warning and high beam assistant, additionally with lane keeping assistant - headlight assistant with day/night sensor - cruise control - fog lights - Ford audio system 4 inch multifunction display * Particle filter: diesel particle filter * Wheels: hubcaps * Wheels: tire repair kit * Wheels: steel wheels 6.5 J x 15 with 215/65 R 15 tires Kdedpfx Ajx Ax Dwjh Nsg * Headlight dipped beam halogen headlights with daytime running lights * Sliding door, right * Mud flaps at the rear * Side protection strips * Low side paneling * Power steering * Seat belts - Seat belt tensioners and belt force limiters at the front - Warning system for driver's seat belt not fastened * Seats: Rear seat package 4 - 3-seater bench seat narrow in the 2nd row, removable, with three height-adjustable hea

Condition: used, mileage: 32 km, power: 96 kW (130.52 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,100 kg, first registration: 01/2025, emission class: euro6, color: white, number of seats: 9, total width: 2,474 mm, total height: 2,526 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Subject to errors and prior sale! Internal number: 83413----LOCATION: 04758 Oschatz, Filderstädter Straße 10 Tel. no. for inquiries: Mr. Enrico Schieler: 03435 ? 90 90 22 or ---- OPTIONAL EQUIPMENT * Air conditioning front and rear - incl. water heating rear - incl. dust and pollen filter * Seats in the passenger compartment: seat backrests with adjustable inclination * Seat package 15: Driver's seat adjustable in 4 ways - Double passenger seat with storage compartment under individually foldable seat cushions - Headrests height adjustable - Tray integrated in the double passenger seat (foldable) - Seat heating for driver - Seat heating for passenger - Inside armrest for driver - Manual lumbar support (driver's seat) - Seat cover: fabric * Technology package 10: Heated windscreen - Windscreen wipers with rain sensor - Parking pilot system front and rear - Emergency brake assistant, active (camera-based) - Lane assistant with fatigue warning and high beam assistant, additionally with lane keeping assistant - Headlight assistant with day/night sensor - Cruise control - Rear view camera with image transmission of the rear path in the multifunction display - LED downlight - fog lights - Ford audio system. with 4 inch multifunction display OTHER EQUIPMENT * 1 battery * Airbag on driver and passenger side * ABS with electronic brake force distribution - ESP with traction control - Hill start assist - Crosswind assist - Safety brake assist - Rollover protection - Emergency brake support including emergency brake light * Electrically adjustable and heated exterior mirrors - with integrated indicators * Battery: battery life, battery life programmed to 10 minutes * Rubberized floor (in driver's cab and passenger compartment) * On-board computer with consumption and mileage information (e.g. remaining range) as well as outside temperature display and Ford ECO mode Kdsdex Ax Dqepfx Ah Njg * Complete roof liner * Double-wing rear door with 180° opening angle (with window) - with heated rear windows, rear window wiper including window washer nozzle and automatic activation when reverse gear is engaged * Passenger compartment lighting with delay circuit * Window, 2nd row: side windows fixed, right * Front window lifter electric * Ford Easy Fuel - comfort tank cap and misfuelling protection * Generator, high-performance version * Glove compartment with lid, lockable * Interior lighting with delay circuit with reading lights at the front * Fuel tank 70 l * Steering wheel: leatherette steering wheel * Steering column, adjustable in height and reach * MyKey key system - individually programmable second key * Emergency call assistant * Package: Technology package 9 - heated windscreen - windscreen wipers with rain sensor - parking pilot system front and rear - emergency brake assistant, active (camera-based) - lane assistant with fatigue warning and high beam assistant, additionally with lane keeping assistant - headlight assistant with day/night sensor - cruise control - fog lights - Ford audio system 4 inch multifunction display * Particle filter: diesel particle filter * Wheels: hubcaps * Wheels: tire repair kit * Wheels: steel wheels 6.5 J x 15 with 215/65 R 15 tires * Headlight dipped beam halogen headlights with daytime running lights * Sliding door, right * Mud flaps, rear * Side protection strips * Low side paneling * Power steering * Seat belts - Seat belt tensioners and belt force limiters at the front - Warning system

Condition: ready for operation (used), Year of construction: 2016, General Data Measurements width 1240 mm Measurements depth 4530 mm Measurements height 1910 mm Kdodsx D I Uuspfx Ah Nog Machine weight 3500 kg Injection Unit Screw diameter 36 mm Stroke volume 153 cm³ Injection pressure 173 MPa Screw speed 98 g/s Clamping Unit Clamping force 900 kN Opening stroke 320 mm Max open daylight 700 mm Ejector stroke 100 mm Ejector force for / back 33 kN Media Oil tank 190 L This HAITIAN MA900 II eco was manufactured in 2016. It is a hydraulic injection moulding machine with a clamping force of 900kN and a shot volume of 153 cm3. Consider the opportunity to buy this HAITIAN MA900 II eco hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: used, mileage: 108,000 km, power: 77 kW (104.69 HP), first registration: 02/2019, fuel type: diesel, overall weight: 3,140 kg, next inspection (TÜV): 02/2027, color: silver, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,531 mm, total width: 2,059 mm, total height: 2,500 mm, loading space length: 3,000 mm, loading space height: 1,830 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, Well-maintained Ford Transit Panel Van 310 L2H2 (long + high roof), featuring professional workshop installation and a high level of equipment. Ideal for tradespeople, service providers, and craftsmen—perfect as a service or workshop vehicle. Single owner Workshop/storage rack installation by BOTT (see details below) • Auxiliary heater with remote control, programmable • Heated seats (driver & passenger) • Air conditioning with pollen filter • 3 seats (Seat Package 9/15, double passenger bench) • Comfort driver’s seat with foldable armrest, 4-way adjustment: – Seat height, seat tilt, backrest, lumbar support • Fabric seat upholstery • 3.14 t GVW • Solid partition wall, no window, noise insulated in driver’s cab Driver Assistance Systems: • PDC Park Pilot front and rear, acoustic warning • Cruise control • Hill start assist • Emergency brake assist • Braking assist • Electronic differential lock (EDS) • ABS, ASR, ESP • Onboard computer / multifunction display • Leather multifunction steering wheel in ALU design • Audio system with multifunction display – Media: Radio (FM, AM), USB, AUX-In – Bluetooth phone interface with hands-free system – 4 speakers with quality sound • Comfort features: – Electric windows – Electrically adjustable & heated exterior mirrors – Central locking with remote – Static cornering lights (integrated in headlights) – Fog lights – Daytime running lights – Indicators integrated in exterior mirrors – Spare wheel in running condition with jack • Second battery (cold start package) • 230V / 250 VA inverter in cab • Trend trim level • Metallic silver paint • Partly painted bumpers • Electronic brake-force distribution (EBD) • 165 A alternator • Engine: 2.0 L – 77 kW TDCi CAT • 6-speed manual transmission • Front-wheel drive (FWD) • Body type: high-roof panel van • Wheelbase: 3,300 mm (L2) • High rear barn doors, no windows, 180° opening • High sliding door, right side • Grab handle on B-pillar • Registered as commercial vehicle van • Rear mud flaps • Height/reach adjustable steering column • Reading lamps • Rubber floor covering in front, rubber mats • Overhead storage binnacle in cab • 2 x 12V front sockets • Tinted heat insulation glazing Cargo area conversion: BOTT workshop/rack fit-out (similar to Aluca, Sortimo, Würth) with shelving on both sides, 7 drawers, compartment, various storage bins, and shelves. Includes 7 tool/small parts cases. Fold-out vice. Solid partition wall (no window), sound insulated in cab. Rugged plastic-coated wood flooring. Load securing via lashing eyes and special rails. Full-height side wall paneling with plastic sheets. LED cargo area lighting. Cargo space dimensions: – Length bottom: 300 cm – Length middle: 290 cm (due to partition slope) – Height: 183–186 cm (below roof cross-members) Maintenance, fully documented by Ford authorized service: • 02/2021 — 29,021 km: Inspection, oil & brake fluid service • 02/2023 — 62,304 km: Inspection, oil, brake fluid, and engine air filter service • 02/2025 — 97,633 km: Inspection, oil, brake fluid, fuel filter service, timing belt replaced Tyres: Bridgestone summer tyres 215/65 R15 on steel wheels with full wheel covers, approx. 5 mm tread remaining Kedpfx Ahjx E U Nwo Nedg Despite careful preparation, errors in description and transmission—including images—may occur. Subject to errors and prior sale. Vehicle inspections by DEKRA or TÜV are welcome. omobile-Fischer-Muenchen.

Condition: new, Year of construction: 2025, Economical shrink wrapping machine (2-in-1/Bubble-machine/Hood-shrinker) with roller conveyor for product out feed. Film welding and shrinking in one step. For flexible packaging of smaller quantities. - Technical specifications: 220V, 4.2kW; compressed air not necessary; max. speed of the machine in neutral: 17 cycles/minute; max. product dimensions (mm): L450xW300xH200; max. weight of the product: depending on the dimensions of the product or rather how the weight is distributed on the feed table; machine dimensions (mm): L1400xW870xH1080; weight (net/gross): 150/220kg. In case of heavy products we are gladly producing a sample packaging of your product, either to confirm that the machine is able to handle your product or to offer you other machines for your packaging task. In semi-automatic machines, the number of cycles is to be understood as an operator-dependent value and additionally based on experience. Kedpfx Ahsv Nlzaj Nodg Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Economical shrink wrapping machine (2-in-1/Bubble-machine/Hood-shrinker). Film welding and shrinking in one step. For flexible packaging of smaller quantities. - Technical specifications: 220V, 4.0kW; compressed air not necessary; max. speed of the machine in neutral: 8 cycles/minute; max. product dimensions (mm): L450xW300xH200; max. weight of the product: depending on the dimensions of the product or rather how the weight is distributed on the feed table; machine dimensions (mm): L1380xW690xH1065; weight (net/gross): 125/175kg. In case of heavy products we are gladly producing a sample packaging of your product, either to confirm that the machine is able to handle your product or to offer you other machines for your packaging task. In semi-automatic machines, the number of cycles is to be understood as an operator-dependent value and additionally based on experience. Ksdpsv Nly Nofx Ah Nedg Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2023, Vecoplan V-ECO 900, a plastic shredding machine with a capacity of up to 1,000 kg/h. The machine is brand new and in its original packaging. New, originally packaged Brand and model: Vecoplan V-ECO 900 Processable materials: All polymers Type: Shredder Brand: VECOPLAN V-ECO 900 Year of manufacture: 2023 Technical data: Rotor working width: 900 mm Kdedpfx Ahsx U T Aho Njg Rotor diameter: 370 mm Number of rotor knives: 42 (in standard configuration) Rotor speed: approx. 130 – 160 rpm Capacity: 400 to 1,200 kg/h – depending on material type, blower, and feed rate Drive power (ESC motor): Standard: 30 kW / 37 kW / 45 kW Feed opening: approx. 900 x 1,100 mm Machine weight: 5,200 kg

Condition: used, machine/vehicle number: 007676, Position 1: Brushing Machines BARBERAN-ECO-1700-H-SI Position 2: Gluing Machine BARBERAN-ECO-1700-H-SI Position 3: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI Kedpfx Ajwuzzrjh Nodg Position 4: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI