Used Cts for sale (260)

Condition: used, Chemical Mixer, Stainless Steel Mixer, Chemical Mixer 2000 L, Used Machine Hjdpoyc Sfvofx Ahveni Manufacturer: Chemplex Type: T240 Electrical power: Heating: 20 kW Mixer motor: 3 kW Weighing system: MS-h10/kn, MS-CT-SQB – maximum weighing capacity 3,500 kg Maximum heating temperature: 90 °C Capacity: 2,000 L Description: General-purpose chemical mixer manufactured by Chemplex with a 2,000-liter capacity, designed with an integrated tank weighing system (3 load cells with indicator). The vessel is an atmospheric tank with a DN100 bottom outlet. Heating is provided by a 20 kW electric bottom heater. The mixer is equipped with a propeller-type agitator. It features a flat lid, which is openable and fitted with a safety grid. The lid includes 4 dosing/inlet nozzles. Recommended operating temperature: 20–60 °C. The bottom discharge nozzle is fitted with a stainless steel ball valve, equipped with a pneumatic actuator and bubble position indicator. The actuator is spring-loaded, providing a fail-safe (safety closed) function.

Condition: ready for operation (used), Chemical mixer, stainless steel mixer, chemical mixer 3000 L, used machine Hnedpsyc Nq Aefx Ahvsi Manufacturer: Chemplex Type: T420 Electrical power: Heating: 30 kW Mixer: 3 kW Weighing system controller: MS-h10/kn, MS-CT-SQB – Maximum weighing capacity: 3500 kg Maximum heating temperature: 80 °C Capacity: 3000 L Description: General-purpose chemical mixer manufactured by Chemplex with a 3-ton capacity, designed with an integrated tank weighing system (3 load cells with indicator). The tank is an atmospheric vessel with a DN100 bottom outlet. Heating is provided by 30 kW electric bottom heating and jacket heating. The mixer is equipped with a propeller-type agitator. It has a flat lid that can be opened and is fitted with a safety grid. The lid contains 4 dosing/inlet nozzles. Recommended operating temperature: 20–60 °C. The bottom discharge outlet is fitted with a stainless steel ball valve equipped with a pneumatic actuator and bubble (position) feedback. The actuator is spring-loaded, therefore the ball valve has a safety-closed function.

Condition: used, Chemical mixer, stainless steel, chemical mixer 2000 L, used machine Manufacturer: Chemplex Type: T250 Electrical power: 20 kW heating Weighing system: MS-h10/kn, MS-CT-SQB – maximum weighing capacity 3,500 kg Maximum heating temperature: 90 °C Description: Chemplex-manufactured general-purpose chemical mixer with a 2,000-liter capacity, designed with an integrated tank weighing system (3 load cells with indicator). The vessel is an atmospheric tank with a DN100 bottom outlet, suitable for high-viscosity and slurry materials as well. Hedpfxoyc Np Ee Ahveni Heating is provided by a 20 kW electric bottom heater. The mixer is equipped with: Spiral ribbon anchor(Anker) mixer Propeller mixer It has a flat lid, which is openable and fitted with a safety grid. The lid contains 5 dosing/inlet nozzles. Recommended operating temperature: 20–60 °C. The bottom discharge nozzle is fitted with a stainless steel ball valve, equipped with a pneumatic actuator and bubble position indicator. The actuator is spring-loaded, providing a safety-closed (fail-safe closed) function.

Condition: new, Model: TERRA 54HV CT Serial number (SN): T54HV-IT1-3320-065 Year of manufacture: 2020 Electrical specifications: Input: 400 V / 3P + N~, 112 A, 77 kW, 50 Hz Hodpfx Aovu Stmohvjni DC output (DC output CCS2): 150–950 V DC, 0–125 A, 50 kW AC output (AC output): 400 V / 3P + N~, 32 A, 22 kW, 50 Hz

Year of construction: 2010, condition: used, functionality: fully functional, machine/vehicle number: C1210000251, Yxlon Multiplex 5500 M – Industrial X-Ray & CT Inspection System The Yxlon Multiplex 5500 M is a powerful, fully digital X-ray inspection system for non-destructive material testing (NDT/NDE). It is ideally suited for applications in the automotive, aerospace, electronics manufacturing industries, as well as for cast and structural components. The system offers precise 2D radioscopy and can optionally be upgraded to a fully-featured 3D computed tomography (CT) system. Main Features • Fully digital X-ray system with HDR radioscopy and CT option • Automatic Defect Recognition (ADR) integrable • Ideal for steel, aluminum, ceramics, and plastics • High resolution via CCD camera + image intensifier • Intuitive operation via central control console • High throughput for serial inspections Technical Data (Y.Multiplex 5500 M) Inspection Chamber & Capacity • Maximum part size: Ø 600 mm, 900 mm height • Maximum part weight: 60 kg • Typical throughput: 30 s for 6 positions System Data • Cabin height: approx. 2650 mm • Cabin width: approx. 2650 mm • Cabin depth: approx. 1900 mm • Total cabin weight: approx. 6500 kg • Operator console: approx. 250 kg Electrical & Power • Power supply: 3 × 230/400 V, 50 Hz • Power consumption: approx. 4.5 kVA • Main fuse: 40 A slow-blow Detector Technology • Active area: 204.8 × 204.8 mm • Pixel matrix: 1000 × 1000 active • Pixel size: 200 µm • Energy: 40 – 225 kV Hodpfx Ahsyg Iqveveni Manipulation & Axes • Multiple automatic/manual axes (4–7 depending on model) • U-arm manipulator for flexible positioning Condition & Applications Thanks to its modular design, reliable Siemens drives, and high-quality X-ray technology, the Yxlon Multiplex 5500 M provides a durable, precise, and efficient inspection platform. Ideally suited for: • Serial inspection & inline quality control • CT analysis of internal structures • Analysis of casting and porosity • Electronics and solder joint inspection • Aerospace and automotive components Scope of Supply • Complete Yxlon Multiplex 5500 M X-ray system • Operator console • X-ray detector incl. image intensifier • Siemens drive & control technology • Original operating manual

Condition: excellent (used), CTS 3G C 400* - Superheated water boiler with manual wood waste feeding Thermal output: 400,000 kcal/h. Pressure: 4 bar. Superheated water temperature: 150°C. Control thermostat, safety thermostat, thermometer. Fuel: wood waste Smoke exhaust: cyclone, forced-draught fan, connecting ductwork Steaming chamber net capacity: 100 m³/batch DVK-I 100 m³ - 1 unit, 8.5 x 9 m x h 4.3 m Control system: Baschild Italy Sliding door Oxyvent overpressure system Stainless steel tanks and radiators on 3 sides Includes turnkey connections from boiler to steaming chamber and a complete boiler room with distributor, collector, pumps, expansion vessel, etc. Hnodpfx Ajw Ev Twjhvji

Condition: excellent (used), Year of construction: 2023, operating hours: 1,600 h, functionality: fully functional, overall weight: 26,600 kg, fuel type: diesel, tank capacity: 4,500 l, color: white, power: 1,800 kW (2,447.32 HP), output current: 3,260 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 1,800 kW (2,447.32 HP), nominal power (apparent): 2,250 kVA, total length: 12,196 mm, total width: 2,500 mm, total height: 2,960 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: MTU, type of cooling: water, 3 Units Super Silent Generator Containers MTU 16V4000G63 – 2,250 kVA Many other sizes available: 1,000–2,500 kVA! For sale are 3 soundproof generator containers equipped with MTU 16V4000G63 diesel gensets (manufacture year 2016), installed in purpose-built super-silent containers (manufacture year 2024). These gensets are engineered for demanding emergency power applications and are housed in acoustically optimized high-cube containers. Container Design: Super Silent, acoustically insulated Quantity: 3 units (2 × right-hand layout, 1 × left-hand layout) Dimensions (incl. exhaust): 12,192 × 2,500 × 3,050 mm Weight: approx. 26,600 kg (empty tank) Color: RAL 9010 (white) Fuel tank: 4,600 liters integrated Generator (Genset) Output: 2,250 kVA Ambient temp.: 25°C Voltage: 400 V, 3-phase Frequency: 50 Hz and 60 Hz Speed: 1,500 / 1,800 rpm Engine: MTU 16V4000G63 Control: DEIF AGC-4 MK2 Alternator: Mecc Alte ECO46 2L/4A with MAUX excitation Cooling: 25°C radiator with electrically driven fan Hnjdpfx Ahoyf U Uxsvoi Circuit breaker: Schneider Electric NW04, 4-pole, 4,000 A, motorized, 100 kA Equipment Star-point circuit breaker for open-neutral operation Neutral earthing contactor with CT Automatic pre-lubrication pump Centrifugal oil filter (MTU) Fuel return cooler Water separator fuel filter 9 kW water pre-heater (400 V) Intelligent battery charger (DEIF, 10 A) Location: Eferding, Austria Availability: immediately Price: on request

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, saw blade diameter: 600 mm, Power supply: 400 V Blade diameter: Ø 600 mm Machine weight: 1820 kg Year of manufacture: 2006 Type: CT 600 Motor power: 7.5 kW Serial number: 260856 Infeed pusher dimensions: 10,300 × 2,000 × 1,250 mm Outfeed conveyor dimensions: 6,300 × 800 × 1,120 mm Outfeed table dimensions: 5,000 × 1,250 × 910 mm Rotational speed: approx. 2600 rpm Table rotation range: max. ±70° Cutting height: approx. 200 mm (at 0°) Max. cutting width: approx. 410 mm Minimum workpiece size: 20 × 10 mm Hjdpfx Aex Nnd Ashvjni Positioning accuracy: ±0.4 mm Cycle time: approx. 4 seconds per cut Working height: 1000 mm Chip extraction connections: Ø 100 mm Beckhoff control with 12-inch touchscreen (Windows interface), 3D element visualization, cutting list import via USB/Ethernet.

Condition: excellent (used), Julabo Julabo Transparent Circulating Bath Thermostat CT 72/P incl. ED Thermostat Item Description: For sale is a Julabo transparent circulating bath thermostat CT 72/P with Julabo ED (v2) temperature controller. This unit comes from a laboratory inventory and is in used but technically fully functional condition. The bath heats and controls temperature accurately and stably, and circulation is present (see photos). Ideal for laboratory, industrial, educational, testing, or development applications. Technical Data (excerpt) Manufacturer: Julabo Labortechnik GmbH (Made in Germany) Model: CT 72/P with ED thermostat (v2) Bath temperature range: approx. +10 °C to +60 °C Temperature stability: ±0.02 K Heating capacity: Hnodpfxox T Av Is Ahvsi 2000 W at 230 V Circulation pump: Flow rate approx. 15 l/min Bath volume: approx. 18 liters Bath material: Acrylic glass / stainless steel Interface: RS232 Power supply: 190–253 V / 50–60 Hz Protection class: I / IP20 Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see photo) (Specifications and data are subject to change and errors!) If you have any further questions, we will be happy to answer them by phone.

Condition: used, mileage: 300 km, power: 129 kW (175.39 HP), color: grey, driver cabin: day cab, gearing type: mechanical, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, power assisted steering, - Mr. Rudolph will be happy to assist you by phone at: Daily 70C18 H hooklift truck / Wheelbase 3,750 mm / Driver’s comfort seat with armrest and lumbar support, adjustable in height, angle, and longitudinal position, hydraulically sprung, Proactive Lane Departure Warning System (LDWS), rear wall of cab with window, driver’s front airbag with seatbelt tensioners, seatbelts with warning signal for driver and passenger, HI-Connect radio with Bluetooth hands-free system, multifunction steering wheel, Apple CarPlay & Android Auto, 20-liter AdBlue tank under cab, integrated 90 l fuel tank, speed limiter set to 90 km/h, ball-head trailer coupling, towing capacity 3.5 t, differential lock on drive axle, Mineral Grey IC 371, 225/75 R 16 M+S tires, body from Forster-Fahrzeugbau, Charvat CTS 05-32-K-DIN-BF hooklift, and much more. Mr. Rudolph will be happy to assist you by phone at: Should you wish to lease or finance the vehicle, we are happy to provide you with a customized offer. We are also pleased to take your used commercial vehicle in part exchange. Errors and prior sale excepted! For more information, please visit our homepage: ... ESP Hodpfjyfvycex Ahvoni = Further information = Engine displacement: 2,998 cc Gross vehicle weight: 7,200 kg Contact Tobias Ebert for further information.

Condition: new, mileage: 500 km, power: 129 kW (175.39 HP), color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, central locking, power assisted steering, - Mr. Rudolph is happy to assist you by phone at: Hedpfxjyfu Tze Ahveni Daily 70C18 H hooklift truck / wheelbase 3,750 mm _____ Comfort driver's seat with armrest and lumbar support, adjustable for height, tilt, and length, hydraulically suspended, proactive lane departure warning system (LDWS), cab rear wall with window, driver's front airbag with seat belt tensioners, seat belts with warning indicator for driver and passenger, HI-Connect radio with Bluetooth hands-free system, multifunction steering wheel, Apple Car Play & Android Auto, 20-liter AdBlue tank located under the cab, integrated 90l fuel tank, speed limiter 90 km/h, ball-type trailer coupling, trailer load 3.5 t, differential lock on drive axle, white IC 194, tires 225/75 R 16 M+S, body built by Forster-Fahrzeugbau, Charvat CTS 05-32-K-DIN-BF hooklift, and much more. Mr. Rudolph is happy to assist you by phone at: Should you wish to lease or finance the vehicle, we are happy to provide you with a tailored offer. We will gladly accept your used commercial vehicle in part exchange. Errors and prior sale excepted! You can find more information on our homepage: ... ESP, particle filter = Further Information = Engine displacement: 2,998 cc gross vehicle weight: 7,200 kg Please contact Tobias Ebert for further information.

Condition: used, Year of construction: 2025, *JCB CT 160-100 – New Vehicle* - Operating weight: 1,790 kg - Drum width: 1,000 mm - Engine: Kubota [14.5 kW / 20 HP] - Frequency: 50 Hz / 66 Hz - Amplitude: 0.47 mm - Centrifugal force: 12.8 / 22.2 kN - Interval - Pressurized water sprinkling system Hnjdpfx Aheyfr Ngsvoi - Water tank: 100 l - Fuel tank: 33 l - Lockable scrapers - Automatic vibration control (AVC) - Double or single vibration front / rear - Maintenance-free articulated joint - Hydrostatic drive and vibration on both drums - Crab steering 56 mm / reverse alarm / beacon / battery master switch - Instrument protection cover - Live Link - Foldable ROPS for CT 160 Viewings strictly by appointment only! On request, we are happy to provide you with a leasing or financing offer from Mercedes-Benz Bank. Mr. Mihm (phone) will be pleased to assist you. Further information is available on our website. Subject to errors and prior sale! = Further Information = Please contact Tobias Ebert for more details.

Condition: new, Year of construction: 2025, ∗Tandem Roller Type CT 260-120 New Machine∗ Year of manufacture: 2025 Hnodpsyfqpfsfx Ahvsi - 310N Tandem Roller Type CT 260-120 - (articulated) with crab steering - Operating weight: 2,560 kg - Drum width: 1,200 mm - Engine: Kubota D 1703 [18.2 kW/25 HP] - Frequency: 50 Hz/66 Hz, Amplitude: 0.51 mm - Centrifugal force: 23.6 / 41.1 kN - Pressurized water spray, water tank 197 l - Fuel tank 46 l - Lockable scrapers - Automatic vibration control (AVC) - Double or single vibration front or rear - Maintenance-free articulated joint - Hydrostatic drive - Vibration on both drums - Crab steering - Reverse alarm - Rotating beacon - Battery master switch - Instrument protection cover - AA20 foldable ROPS - Operating manual We kindly request that you schedule an appointment for viewing! Upon request, we can provide you with a leasing or financing offer from Mercedes-Benz Bank. Mr. Mihm (phone) will be happy to assist you. More information is available on our homepage. Subject to errors and prior sale! - = Further information = Please contact Tobias Ebert for more details.

Condition: new, power: 397 kW (539.77 HP), axle configuration: 6x4, color: green, driver cabin: sleeper cab, gearing type: automatic, Equipment: ABS, EBS, air conditioning, - Brake system Hnodpfx Ajyfqhnohvji For vehicle enquiries, Mr. Seidel is your contact (by phone). Iveco X-Way AT300X54Z HR OFF 6x4 Three-way tipper CA Axle configuration: 6x4, 3 axles, 2 driven axles. CT Cab AT MY, DR Steering: SX Left-hand drive, EM Emission Level: Europe, EP Engine: 540 C13 Cursor 13, 540 HP, GT Gearbox: TX-12M 12-speed HiTroniX, automated, MT Permissible total weight: 26–30 t, RT Drive axle variant HR-TM: Tandem Medium with outboard planetary drive, SU Suspension: MEC Mechanical suspension, TF Brakes: DIS-DIS Disc/Disc, US Application: MIXED For road and light off-road use, VE Vehicle variant: CABINAT Standard chassis with cab, VS Vehicle Set-up: OFF, WB Wheelbase: 3,500 mm, 06366 Rear engine PTO for pump connection, 78507 Rocking mode (free rocking function), 00869 Mirror cams Cover for AS FHS in vehicle colour / black for AT, 00640 Roof hatch, mechanical version, 77174 Tyre inflation hose 18 m with pressure gauge, 02758 Electric cab tilting mechanism, 00553 Headlamp protection grille, 00632 Transparent sun visor, mounted externally on cab roof, 02474 Preparation for rotating beacons, 79468 Flat roof painted in cab colour, 72536 Additional diesel/water heater, 4 KW, 02443 Leather steering wheel, 72251 Curtains for bed, 78563 Air horn behind bumper (compressed air), 04087 Lower bunk raised with safety net, continuous mattress, for AT/AS: three-piece mattress, 06636 Luxury co-driver seat, 4-way adjustable, air-suspended, integrated headrest and seatbelt, heated, lumbar support, 06695 On-board refrigerator, 08354 Ashtray in centre console, 72158 Axle load variant: front axle 9,000 kg / 1st rear axle 10,500 kg (technically possible: 11,500 kg), 2nd rear axle 10,500 kg (technically possible: 11,500 kg), 06403 Tipper version, 00180 Exhaust pipe extended upwards behind the cab, 14531 Reinforced front axle stabiliser, 02576 Batteries: 225 Ah, 72260 Stiffened parabolic leaf spring (60 mm), 05365 Without jack, 00191 Radiator protection below bumper for heavy off-road use, 78713 Battery charging socket, terminals, 04861 Rear frame overhang, 730 mm, 07806 Trailer coupling, brand: Ringfeder, 07228 Fuel tank, 390 litres, aluminium, 06157 Trailer coupling, 50 mm, 200 kN, 05883 AdBlue tank: 60 litres, 06032 Rear axle ratio: 3.79, 06151 Rear crossmember, D-value: 200 kN, 00876 Infotainment: 10" TFT display + integrated Driver Pal, 04572 Extension module for PTO management, 01340 Available auxiliary switch slots for body builder, 77985 Engine idle cut-off, 14522 Adaptive cruise control (ACC), 78878 GPS cruise control Hi-Cruise, 02548 Side marker lights, 78484 Emergency brake assist (AEBS), 75181 Reverse warning sounder, deactivatable, 00915 Electric parking brake, 00237 Retarder/intarder for ZF transmission or Allison automatic transmission, 07888 Electronic Stability Program (ESP), 02672 Inspection step, left, 52014 Leaf green RAL 6002, 30804 Printed materials (manuals), 30184 Tyre manufacturer: GOODYEAR, 20867 Tyres: 385/65 R22.5, 315/80 R22.5, 28579 KMAX S GEN-2 (3PMSF), KMAX D GEN-2 (3PMSF), 72920 Operating and maintenance manual, electronic, 02659 Fully automatic air conditioning, 02759 Air suspension for cab, 05629 Roller sun blind for side window, driver and co-driver side, 02916 HI-Comfort driver's seat, ...

Condition: new, power: 427 kW (580.56 HP), axle configuration: 6x2, color: white, driver cabin: day cab, gearing type: automatic, suspension: air, Equipment: ABS, EBS, air conditioning, For inquiries regarding the vehicle, Mr. Seidel will be happy to assist you (by phone). Iveco X-Way AS280X58Y/ PS ON 6x2-4 Skip Loader Body: Meiller AK 16. T, radio remote control, CA axle configuration 6x2P, 3 axles, trailing axle, CT driver's cab Version: AS MY DR steering SX left-hand drive, EM emission level Europe, EP engine: 580 C13 Cursor 13, 580 HP, GT transmission: TX-12M, 12-speed HiTroniX, automated, MT permitted gross weight 26-28 t, RT drive axle type SR, single reduction, single axle, SU suspension: P air suspension on rear axle, TF brakes: DIS-DIS disc/disc, TT additional axle: STER steered trailing axle, single tires, US use: MIXED (for both road and light off-road use), VE vehicle variant: CABINAT standard chassis with cab, VS vehicle set-up: ON, WB wheelbase 3440 mm, 78742 power take-off NTX/10c, lower pump, 78507 rocking mode (free swinging mode), 00869 mirror cams. Hnedoyfqg Repfx Ahvei Cabin features at AS: Cab in vehicle color, 72775 hybrid bumper painted in cab color, 04047 luggage compartment left and right, 02758 electric cabin tilting device, 00553 headlamp protective cover, 00632 transparent sun visor externally mounted on roof, 00873 AS cab with standard roof (MY24), 72536 additional diesel/water heater 4 KW, 72970 standard fridge and storage box, 72251 with curtains at bed, 72270 single-piece lower bed, soft firmness/feeling, incl. adjustable head section, 78563 horn behind bumper (compressed air), 08549 reinforced parabolic spring at front axle, 05097 reinforced rear axle anti-roll bar D 60 mm, 14531 reinforced front stabilizer bar, 08299 air compressor 2-cylinder 630 ccm, 78713 battery charging socket, terminals, 07805 trailer hitch, Rockinger brand, 00733 rear axle ratio: i 2.85, 06156 trailer coupling, 40 mm, 130 kN, 02640 without roof spoiler, 00384 CAN bus interface CAN-OPEN for body control, 01340 free switch slots for body manufacturer, 78877 without GPS cruise control (Hi-Cruise), 02548 side marker lights, 75181 reverse warning buzzer, switchable, 05108 warning beacon, 50105 white IC 194, 30804 printed manuals (operating instructions), 30184 tire manufacturer: GOODYEAR, 20867 tire sizes 385/65 R22.5, 315/80 R22.5, 72920 operation and maintenance manual electronically, 00876 infotainment 10" TFT display + integrated Driver Pal, 02443 leather steering wheel, 01765 dashboard design: plastic with silver trim, 02759 air suspension for cab, 05629 sunblind roller for side window, driver and passenger sides, 02916 HI-Comfort driver's seat, multi-adjustable, air-suspended, integrated headrest and height-adjustable seat belt, lumbar support, with 3-stage cooling or heating function, 72543 LED front headlights, 78715 LED rear lights, 72629 fog lights incl. cornering/turning light, 00915 electric parking brake, 07306 axle load indicator in instrument cluster, 00883 corrective steering function (CSF) + lane departure warning system (LDWS), 00890 adaptive cruise control (ACC) with Stop & Go, 73240 electro-hydraulic power steering, 01076 high-performance engine brake. On request, we can provide you with a leasing or financing offer. Mr. Seidel (Tel.) will be happy to assist you. You can find more information on our website. ... Subject to errors, change, and prior sale ...

Condition: used, mileage: 1,250 km, power: 368 kW (500.34 HP), axle configuration: 6x2, color: red, driver cabin: sleeper cab, gearing type: automatic, suspension: air, Year of construction: 2025, Equipment: ABS, EBS, air conditioning, - Braking system For vehicle inquiries, Mr. Seidel will be happy to assist you (by phone). Iveco S-Way AS260S50Y/FS 6x2-4 Swing-wall box body + tail lift Body: Böse swing-wall box body, BODY DIMENSIONS: Length x internal width approx. 8,100 x 2,470 mm (designed for 20 Euro pallets), side clearance height approx. 2,200 mm, continuous side drop sides. Full roof retraction in open position. Loading platform height approx. 1,300 mm unladen. 2x trailer couplings (1x 40mm high, 1x 50mm dropped). CA Axle configuration: 6x2P, 3 axles, trailing axle, CT cab type. Hsdpfx Aheyfpt Aoveni AS MY version, DR steering SX left-hand drive, EM emission level Europe, EP engine 500 C13 Cursor 13, 500 HP Euro VI, GT gearbox TX-12M 12-speed HiTroniX, automated, MT gross vehicle weight 26 t, RT drive axle variant SR single reduction, single axle, SU suspension FP full air suspension, TF brakes DIS-DIS disc/disc, TT additional axle STER steered trailing axle, single tires, US usage STD standard, VE vehicle variant CABINAT standard chassis with cab, WB wheelbase 5,100 mm, 78507 rocking mode (free rocking mode), 73131 DRIVE tires 315/70R22.5, 01539 front grille design gun metal, 02326 cab plastic parts painted in cab color, 04047 left and right luggage compartments, 01627 IVECO logo gunmetal grey, 79240 black decorative film on doors, 00632 transparent sunvisor, mounted externally above cab roof, 72270 lower bed one-piece, firmness/feel - soft, incl. adjustable head section, 78563 air horn behind bumper (compressed air), 01743 upper bed with single mattress, 07599 axle load variant: front axle 8,000 kg/rear axle 11,500 kg (technically possible: 12,000 kg)/trailing axle 7,500 kg, 02532 battery isolator switch in cab, electrically operated, 02270 battery 210 Ah high performance AGM, 78713 battery charging socket, terminals, 05679 AdBlue tank, 80 liters, 07806 trailer coupling, make Ringfeder, 05688 fuel tank 480 liters, left, aluminum, 06156 trailer coupling, 40 mm, 130 kN, 00351 edge protection for frame end, 01934 ECO NORMAL PERFORMANCE MODE, 78388 electrical connection for body on left side of frame, 02548 side marker lights, 79454 preparation for additional headlights on cab roof, 75181 reverse warning beeper, deactivatable, 05108 warning beacon, 00237 retarder/intarder for ZF or Allison automatic transmission, 52081 traffic red RAL 3020, 30804 printed documentation (operating manuals), 30184 tire make: GOODYEAR, 20294 Tires 315/70 R22.5, 26095 FUELMAX ENDURANCE S D, 79443 printed operation and maintenance manual, 72525 foldable table in passenger area, 01743 upper bed with continuous mattress, 04047 left and right luggage compartments, 72536 additional diesel/water heater 4KW, 72970 standard refrigerator and storage box, 72251 with curtains at bed, 00876 Infotainment 10" TFT display + integrated Driver Pal, 02443 leather steering wheel, 01765 dashboard design: plastic with silver trim, 02759 air suspension for cab, 05629 sun roller blind for side windows, driver's and passenger's side, 02916 driver seat HI-Comfort, multi-adjustable, air-sprung, integrated headrest and height-adjustable integrated seat belt, lumbar support, with 3-level cooling or heating function, 72543 front LED headlights, 78715 LED rear lights, 72629 fog lights incl....

Condition: used, various tool changing consoles / die loading arms available: Hsdpfx Ajxddqfehvsni 070022 GUETHLE-SWT CT 16/1600 (16 t / 1600 mm) with support leg (2x) 180006 GUETHLE-SWT CT 6/2700 (6 t / 2700 mm) with support leg (2x) 210008 GUETHLE-SWT CK t / 1000 mm) (2x) 210009 GUETHLE-SWT CK t / 1000 mm) (2x) 180010 unknown (2 t / 1500 mm) with support leg (2x) 190002 GUETHLE-SWT CT t / 1000 mm) with support leg (2x) 220019 GUETHLE-SWT CT 2/1000 (2 t / 1000 mm) with support leg (2x) 180002 GUETHLE-SWT CK 2/800 (2 t / 800 mm) (2x) 090054 GUETHLE-SWT CS 2/800 (2 t / 800 mm) swivelling (2x) 180003 GUETHLE-SWT CK 1/800 (1 t / 800 mm) (2x) 230001 Hydrap (1 t / 800 mm) (2x) 070023 Dimeco T.C.F. ,5 t / 500 mm) (2x)

Condition: new, Year of construction: 2023, functionality: fully functional, type of input current: three-phase, travel distance X-axis: 1,500 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 610 mm, workpiece weight (max.): 1,500 kg, total height: 24,920 mm, total length: 43,670 mm, total width: 30,700 mm, table length: 1,600 mm, table width: 700 mm, spindle motor power: 11 W, rapid traverse Z-axis: 24 m/min, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, spindle nose: Iso 40, spindle speed (max.): 8,000 rpm, spindle speed (min.): 40 rpm, tool diameter: 75 mm, tool length: 250 mm, Equipment: documentation/manual, rotational speed infinitely variable, NEW vertical machining center "AWEA BM-1500 II" with FANUC 0i-MF Plus CNC Hjdpfx Asrkn Iiehveni Accessories present: 4th axis interface Air blow system Left side auger chip conveyors Coolant through spindle ( CTS ) at 20 bar Coolant gun Fairing bottom washing system 500 liter refrigerant collection tank Automatic power-off system Alarm light & work light

Condition: new, Year of construction: 2023, functionality: fully functional, type of input current: three-phase, travel distance X-axis: 1,400 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 610 mm, workpiece weight (max.): 1,400 kg, total height: 2,492 mm, total length: 4,367 mm, total width: 3,070 mm, table length: 1,500 mm, table width: 650 mm, spindle motor power: 11 W, rapid traverse Z-axis: 24 m/min, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, spindle nose: Iso 40, spindle speed (max.): 8,000 rpm, spindle speed (min.): 40 rpm, tool diameter: 75 mm, tool length: 250 mm, Equipment: documentation/manual, rotational speed infinitely variable, NEW vertical machining center "AWEA BM-1400 II" with FANUC 0i-MF Plus CNC Accessories present: 4th axis interface Air blow system Left side auger chip conveyors Coolant through spindle ( CTS ) at 20 bar Coolant gun Fairing bottom washing system 390 liter refrigerant collection tank Automatic power-off system Hsdpfx Ahjrg Htpjveni Alarm light & work light

Condition: new, Year of construction: 2023, functionality: fully functional, type of input current: three-phase, travel distance X-axis: 1,200 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 610 mm, workpiece weight (max.): 1,200 kg, total height: 24,920 mm, total length: 38,970 mm, total width: 30,700 mm, table length: 1,300 mm, table width: 650 mm, spindle motor power: 11 W, rapid traverse Z-axis: 24 m/min, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, spindle nose: Iso 40, spindle speed (max.): 8,000 rpm, spindle speed (min.): 40 rpm, tool diameter: 75 mm, tool length: 250 mm, tool weight: 7 g, Equipment: documentation/manual, rotational speed infinitely variable, NEW vertical machining center "AWEA BM-1200 II" with FANUC 0i-MF Plus CNC Accessories standard: 4th axis interface Air blow system Left side auger chip conveyors Coolant through spindle ( CTS ) at 20 bar Coolant gun Fairing bottom washing system 390 liter refrigerant collection tank Automatic power-off system Alarm light & work light Hodsrhi Rkspfx Ahvoni

Condition: used, Year of construction: 1987, turning diameter max. 400 mm turning length 1.000 mm control EPL 2 greates pass round over bed 400 mm Swing dia. over traverse guideway 225 mm travel -x axis 260 mm travel -z axis 1.040 mm turning speed range - main spindle 20 - 4.000 min/-1 power capacity - main spindel 11 kW max. Torque 75 Nm spindle bore 72 mm chucking diameter 185 mm spindle head 140H5 spindle diameter in front bearing 100 mm number of toolpositions 12 pos. diameter of quill 80 mm Hnedpfox Sy Ursx Ahvoi quill stroke 100 mm taper of center MK 4 pressure max. 800 daN rapid power traverse in X-and Z direction 10 m/min Feed speed x: 5 m/min. Feed speed z: 5 m/min. Feed force x: 500 daN Feed force z: 800 daN total power requirement 29 kW weight of the machine ca. 4,0 t dimensions of the machine ca. 4,6 x 2,1 x 2,0 m CNC - Lathe GILDEMEISTER - NEF CT 40

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 1159547, travel distance X-axis: 3,683 mm, travel distance Y-axis: 2,159 mm, travel distance Z-axis: 610 mm, rotational speed (max.): 8,100 rpm, number of slots in tool magazine: 20, Machining center with extended Z-axis and magazine size as well as steel table and other additional equipment No reserve price - guaranteed sale at the highest bid! Bidding obliges you to pick up the machine on time by January 31, 2025! TECHNICAL DETAILS X-axis: 3,683 mm Y-axis: 2,159 mm Z-axis: 610 mm - extended Distance spindle nose - machine table (max.): 343 mm Spindle nose to table (min.): 64 mm Spindle Max. rated power: 11.2 kW Max. speed: 8,100 rpm Max. torque: 65.0 Nm at 1,500 rpm Drive system: Direct Speed, Belt Drive Cone: CT or BT 40 Table Length: 3,708 mm Width: 1,829 mm Thickness: 25 mm Material: Steel - extended! Max. load capacity on table (evenly distributed): 2,722 kg Space between columns: 2,184 mm Hole pitch: M12 thread Feed rates Max. feed for cutting: 20.3 m/min Rapid traverse X: 20.3 m/min Rapid traverse Y: 53.3 m/min Rapid traverse Z: 27.9 m/min Axis drives Max. thrust force X: 11,210 N Hsdpfx Ahjvpf Imjveni Max. thrust force Y: 4,537 N Max. thrust force Z: 9,119 N Tool changer Type: Carousel Load capacity: 20 tools - extended Max. tool diameter (full): 89 mm Max. tool weight: 5.4 kg MACHINE DETAILS Coolant tank capacity: 360 l Compressed air connection: 113 l/min at 6.9 bar Min. air pressure: 5.5 bar Dimensions - Shipping Pallet: 575 cm x 348 cm x 295 cm Export box: 575 cm x 348 cm x 303 cm Weight: 10,887 kg EQUIPMENT - WIPS-R_GR-712 Intuitive wireless measuring probe system, Renishaw, including macros - CS-GR_GR-712 Cooling system with 360 liter coolant tank and 0.6 kV pump - HSM_GR-712 High-speed machining - C_GR-712 Portable control panel RTAP-3_GR-712 Cable drilling

Condition: used, Manufacturer: Winkworth Model: CT 213 Type : Rotary mixer for drums Maximum product size : Ø 40 x 55 cm Product fixing : Manual Speed variation : Mechanical Hodpfox R A N Aox Ahvoni Mixing speed : 18 – 105 rpm Timer Mode: manual / automatic Materials: Stainless steel Tuscan motor 0.37 kW – ATEX Class EExd II B T4

Condition: good (used), Heavy-duty transport rollers, machine rollers, transport trolleys, heavy-duty trolleys, tank rollers, machine transport rollers -Machine transport roller: armored roller transport roller Cargo Trolley type CT-8 -Load capacity: 12000 kg -Rollers: 8 polyurethane rollers -Number: 4x transport rollers available -Price: per piece -Dimensions: 480/200/H100 mm Hjdpsw Skpxjfx Ahvsni -Weight: 25 kg/piece

Condition: used, Thickness gauge, coating thickness gauge -Manufacturer: PCE, thickness gauge with case Hnsdpfx Ahor H Nlwsvoi -Type: PCE-CT 27FN -Measuring range: 0 - 1250 µm -Accessories: see photos -Dimensions: 250/210/H55mm -Weight: 0.7 kg