Used Counterweight for sale (151)

Condition: new, functionality: fully functional, Year of construction: 2025, * New machine * Year of manufacture: 2025 * Kubota engine 36 kW * Operating weight: 2,600 kg * Lifting capacity: 2,350 kg * Pushing force: 2,800 daN * Tyres: 31x15.50-15 X-TRAC * 1st auxiliary hydraulic circuit (double-acting) proportional on joystick incl. continuous flow * ROPS/FOPS foldable deluxe safety canopy * StVZO package up to 20 km/h * Road lighting (halogen) * Mudguard extensions * Rear counterweight plate 62 kg under the machine * Standard bucket 1,400 mm width and pallet forks 1,000 mm Iedpswmbxzsfx Ahbjtn

Condition: new, functionality: fully functional, mileage: 1 km, power: 14.7 kW (19.99 HP), gearing type: hydrostat, fuel type: diesel, color: yellow, overall weight: 2,420 kg, empty load weight: 2,420 kg, operation weight: 2,420 kg, lifting height: 4,300 mm, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, emission class: euro5, Year of construction: 2026, Equipment: additional headlights, adjustable chassis, air conditioning, cabin, hydraulics, Excavators GT3000 The GT3000 excavator is a modern tracked machine designed for earthmoving operations requiring excellent working range, high digging force, and a stable construction. Thanks to its compact dimensions and robust undercarriage, the machine is ideal for foundation works, installation tasks, municipal projects, and operations in areas with limited maneuvering space. Engine The machine is equipped with a reliable Yanmar 3TNV80F engine delivering a rated power of 14.6 kW. This engine ensures stable and fuel-efficient performance. Working Range The excavator features a 0.09 m³ bucket with a width of 460 mm. The bucket digging force of 17.6 kN allows for efficient excavation, even in tougher soils. The maximum digging depth of 2810 mm and a maximum reach of 4375 mm provide a wide working range without the need for frequent repositioning. A digging height of up to 4510 mm and a dumping height of 2760 mm enable easy loading of materials onto transport vehicles. Dimensions and Stability The overall machine dimensions are 4010 mm in length, 1540 mm in width, and 2360 mm in height to the top of the cab (1380 mm to the top of the boom). The track contact length of 1530 mm and a track width of 1510 mm ensure stability during operation. Track shoes with a width of 250 mm and a low ground pressure of 26.7 kPa allow safe working on less solid surfaces. Mobility and Maneuverability A tail swing radius of 710 mm allows comfortable operation in confined spaces. The swing frame width of 1350 mm and counterweight clearance of 485 mm, along with a minimum ground clearance of 255 mm, ensure smooth movement over uneven terrain. The robust undercarriage with a track length of 1895 mm provides excellent traction and safe operation. Technical Specifications Operating weight: 2420 kg Engine type: Yanmar 3TNV80F Number of cylinders: 3 Rated power: 14.7 kW Rated engine speed: 2200 rpm Max. hydraulic system pressure: 18 MPa Max. gradeability: 30° Ground pressure: 35 kPa Max. travel speed: 2.5–3.5 km/h Max. tractive force: 16 kN Max. slewing speed: 11 rpm Max. digging force: 15 kN Max. digging height: 4300 mm Max. dumping height: 2530 mm Isdpfx Aheymtdnobjtn Max. digging depth: 2550 mm Max. digging radius: 4150 mm Digging radius at max. height: 2700 mm Minimum radius: 1800 mm Boom length: 1950 mm Arm length: 950 mm Bucket width: 450 mm Overall length: 3950 mm Overall width: 1400 mm Overall height: 2300 mm Minimum turning radius: 790 mm Track length on ground: 1870 mm Track width: 250 mm Ground clearance: 250 mm Platform width: 1330 mm Engine hood height: 1350 mm Platform height above ground: 480 mm

Condition: new, functionality: fully functional, machine/vehicle number: MC30-4, Year of construction: 2026, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 1,685 mm, fuel type: diesel, mast type: triplex, construction height: 2,438 mm, power: 37 kW (50.31 HP), fork carriage width: 1,260 mm, fork length: 1,200 mm, empty load weight: 4,500 kg, total length: 3,085 mm, drive type: Diesel, construction width: 1,450 mm, Rough terrain forklift Chassis number: MC30-4 Fork width: 100 mm Fork thickness: 45 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: New Technical condition: New Front tire type: Solid rubber Front tire size: SOLIDEAL 125801812 SL R4 GELANDEPROFIL GESA Front tire condition: New Rear tire type: Solid rubber Rear tire size: SOLIDEAL XTRA 27X1012 SKS GELANDEPROFIL GESA Rear tire condition: New Description: 12 months manufacturer’s warranty / Max. 2000 operating hours Full cabin, full free lift, CE certificate, rotating beacon, LED, Ijdszlvhrepfx Ahbetn Mast tilt holding valve, load cushioning, 3rd function hydraulic kit, fixed connection for the 3rd hydraulic circuit, air-suspended plastic seat GRAMMER MSG95, road lighting, halogen front and rear, cyclone pre-filter, raised vertical exhaust on counterweight, lockable diesel tank lid, reversing warning signal, front fender extension (metal), front fender extension.

Condition: new, Year of construction: 2026, Equipment: soot filter, Now available: Bobcat E60 R2 – Top-of-the-line equipment We are pleased to offer you the Bobcat E60 with excellent special equipment. Condition: New Availability: Immediately from stock. Why Zirndorfer-Maschinenpark? Official authorized dealer for Bobcat & Montabert. * Family-owned business with over 45 years of experience. * In-house workshop for guaranteed quality. * Wide selection of new and used machines. Financing, leasing, or hire purchase? No problem – we will find the right solution for you through our partner banks. Trade-in of used machine? We will gladly accept your machine at fair terms. Attachments and accessories? We will gladly offer additional attachments and suitable accessories upon request. Sales to EU or non-EU countries? We will handle the process for you. Special equipment of the machine: * Cabin * Camera * Mirrors * Heater * Automatic climate control * Radio * Variable offset boom * 2nd auxiliary hydraulic system * 2 Speed (second driving speed) * Digital 7" Deluxe display Isdpfjz N E R Nox Ahbjtn * Suspended fabric seat * Seat heating * Diverter * Long arm * Rotating beacon * Full LED * Fuel pump * Load holding valves * Additional counterweight * Hydraulic track tensioning * Automatic speed control * LED light on the boom * Tilt with HS03 * Camera * 0% financing available for 60 months * 24-month manufacturer's warranty * Without attachments * Further accessories available at an extra charge. Standard equipment of the machine: * Double-acting auxiliary hydraulic system * CE certification Trust in the experience of a third-generation family business: Zirndorfer-Maschinenpark e.?K. – Your partner for construction machinery. Contact us now and secure an individual offer. Legal note: The information provided on the Internet is a non-binding description. It does not constitute a guarantee of specific properties. The seller is not liable for errors, input errors, or data transmission errors. Subject to change.

Condition: used, Year of construction: 2025, operating hours: 12 h, Radio-controlled implement carrier with forestry mulcher The Energreen RoboEVO is a radio-controlled implement carrier designed for operation in particularly challenging and hard-to-access terrain with inclines up to 55°. It is equipped with a powerful 40-hp diesel engine and two double-acting hydraulic controllers, enabling the use of a variety of attachments. * 150 m radio control range * Optimal maneuverability * Traction in all directions up to 55° * Special oil pan for secure engine lubrication * Multifunctional operation * High performance, fast work completion * Maximum traction on any surface Special equipment: * Hydraulic quick couplings “CEJN” * Dual band EU radio remote control with tilt sensor * Bio-hydraulic oil PANOLIN HLP SYNTH 46 * Standard color: Orange RAL 2011 / Grey RAL 7021 * Rear radiator guard * Counterweights, total 70 kg * 2 LED work lights * LED rotating beacon, 12V, with bayonet mount * Hydraulic winch preparation Attachment: Forestry mulcher Forestry Head 130H with hydraulic quick couplings “CEJN”, rotor with hammer flails and material guide frame Robust, reliable forestry mulcher made of Strenx® steel, ideal for cutting grass, bushes, and reeds up to a diameter of 4 cm. Rotor with flails for shredding chopped material. TECHNICAL DATA Cutting width: 1200 mm Oil pressure: 290 bar Number of tools: 22 Oil flow rate: 55 l/min Hydraulic motor: 23 cm³ Weight: 355 kg Itjdpjv R E Hfjfx Ahben We also have other grass mulchers, forestry mulchers, brush cutter heads, as well as a stump grinder in stock. Additional attachments such as double blade mowers, reach mowers, and many other implements available upon request! We are pleased to offer you suitable financing, hire purchase, or leasing options. Delivery or shipping by arrangement. We always have a selection of used and new equipment in stock, with additional units available for demonstration. Contact us! All machines are also available for rent, with or without operator. Other notes: * Trade-in and purchase of vehicles and machinery possible. * Sale price exclusive of transport. * No liability for printing or typographical errors. * Errors, changes, and prior sale reserved. * Offer non-binding. * Photos may differ. Price applies to current condition. * All information supplied without guarantee. Additional information: Engine output: 41 hp (30 kW)

Condition: ready for operation (used), Year of construction: 2011, Features: * Used telescopic belt conveyor * Condition: fully functional, with signs of wear * Ideal for fast material transport * Professionally disassembled and packaged * Color: Blue * 2 units in stock * Price per unit Technical data: Manufacturer: Budde Year of manufacture: 09/11 Model: TGF03 Overall length: 14,530 mm Conveyor length: 14,000 mm Length retracted: 5,000 mm Length extended: 14,000 mm Overall width: 1,240 mm (including control cabinet) Width: 990 mm Belt width: 600 mm Condition: good (used) Belt type: smooth Ijdpfx Ajd S Hkishbotn Overall height: 750 mm Weight: 2,200 mm Includes counterweights at the rear. Telescopic belt conveyor The telescopic belt conveyor is ideal for linking machines or workstations in the picking area and optimizing internal processes. During transport, the telescopic belt conveyor can transport sensitive and differently sized containers, boxes, or other packaging and item units to the input or output station and can also be used as a connecting section before or between production and processing machines. In addition, it enables efficient parts transport within the company and warehouse and serves to transport significant quantities and distances. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods, we are your competent partner! We will gladly prepare an individual offer for you or advise you on design or assembly questions. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our excellent network of experts. We have already successfully completed projects for companies in a wide range of industries, such as logistics, pharmaceuticals, trades, or the electronics industry. Together, we will develop ways to optimize your processes and material flow in a cost-effective and sustainable manner. We can also offer you fully automatic sorting technology or additional components such as picking shelves or containers.

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 7600-101325, load capacity: 340 kg, arm reach: 2,800 mm, pivoting range: 360 °, warranty duration: 4 months, Equipment: documentation/manual, Robot with a 4-month warranty General overhaul included: - Cleaning: Thorough cleaning of the robot panel and surface. - Oil change: Changing the oils for all six axes. - Battery replacement: All internal batteries were replaced with new batteries. - Mechanical maintenance: Gears and counterweight were inspected and serviced after repeatability and weight tests. - Electronic maintenance: Drivers, electronic boards, teach pendant, and PC components were serviced. - Polishing and repainting: The robot was polished and repainted in the original color or a custom color upon request. TECHNICAL DETAILS Reach: 2800 x 3171 mm Payload: 340 kg Control: IRC5 Axis 1 – Rotation motion: +180° to -180° Axis 2 – Arm motion: +85° to -60° Axis 3 – Arm motion: +60° to -180° Axis 4 – Wrist motion: +300° to -300° Axis 5 – Bend motion: +100° to -100° Axis 6 – Turn motion: ±360° (standard), max. ±67 revolutions Dynamics (max. rotation speed per axis) Axis 1: 75°/s Axis 2: 60°/s Axis 3: 60°/s Axis 4: 100°/s Axis 5: 100°/s Axis 6: 160° °/s Position and Path Precision Position Accuracy (AP): 0.18 mm Repeatability (RP): 0.27 mm Stabilization Time (Pst at ±0.4 mm): 0.18 s Path Accuracy (AT): 2.05 mm Path Repeatability (RT): 0.23 mm Ijdpfx Ahszdrx Rjbotn FEATURES - 6-axis industrial robot with a high payload class - Large swivel range on axis 6 with up to 67 revolutions - Precise path guidance with repeatability of less than 0.3 mm - High speed of the wrist axes for fast movements - Perfectly suited for heavy-duty handling and precise motion sequences

Condition: new, functionality: fully functional, power: 14.6 kW (19.85 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 1 l, color: yellow, operation weight: 3,000 kg, maximum load weight: 3,000 kg, lifting height: 4,010 mm, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, first registration: 01/2026, emission class: euro5, Year of construction: 2026, operating hours: 1 h, machine/vehicle number: 1, Equipment: additional headlights, air conditioning, cabin, Excavators GT3000 The GT3000 excavator is a modern crawler machine designed for earthmoving operations that require an extensive working range, high breakout force, and a stable construction. Thanks to its compact dimensions and robust undercarriage, the machine is ideal for foundation work, installation jobs, municipal projects, and tasks in areas with limited maneuvering space. Itodpfjymtfxsx Ahben Engine The machine is equipped with a reliable Yanmar 3TNV80F engine delivering a rated power of 14.6 kW. This engine ensures stable and fuel-efficient performance. Working Range The excavator is fitted with a bucket offering a capacity of 0.09 m³ and a width of 460 mm. The bucket breakout force of 17.6 kN enables efficient digging, even in tougher soil conditions. A maximum digging depth of 2810 mm and a maximum reach of 4375 mm provide a large operational area, reducing the need for frequent repositioning. A maximum digging height of 4510 mm and a dumping height of 2760 mm allow easy loading of material onto transport vehicles. Dimensions and Stability The overall dimensions of the machine are 4010 mm in length, 1540 mm in width, and 2360 mm in height up to the top of the cab (1380 mm to the top of the boom). The track contact length with the ground of 1530 mm and a track gauge of 1510 mm ensure stability during operation. The 250 mm wide track shoes and low ground pressure of 26.7 kPa allow safe operation on less compacted surfaces. Mobility and Maneuverability A rear swing radius of 710 mm allows comfortable operation in confined spaces. The swing frame width of 1350 mm and a counterweight clearance of 485 mm, as well as a minimum ground clearance of 255 mm, enable smooth movement over uneven terrain. The sturdy undercarriage with a track length of 1895 mm guarantees good traction and safe operation. Technical specifications Operating weight: 3000 kg Engine: Yanmar 3TNV80F Number of cylinders: 3 Rated power: 14.6 kW Bucket capacity: 0.09 m³ Bucket width: 460 mm Bucket breakout force: 17.6 kN Swing arm: Present Joystick: Present Swing speed: 13 rpm Max. digging height: 4510 mm Max. dumping height: 2760 mm Max. digging depth: 2810 mm Max. reach: 4375 mm Rear swing radius: 710 mm Track contact length with ground: 1530 mm Total track length: 1895 mm Track gauge: 1510 mm Track shoe width: 250 mm Swing frame width: 1350 mm Ground pressure: 26.7 kPa Total length: 4010 mm Total width: 1540 mm Total height (to top of boom): 1380 mm Total height (to top of cab): 2360 mm Counterweight clearance: 485 mm Minimum ground clearance: 255 mm

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), fuel type: diesel, color: yellow, operation weight: 1,510 kg, maximum load weight: 850 kg, tire size: 27x8.5-15 NHS, Equipment: standard shovel, BULL 2525B articulated loader with ROPS/FOPS protective roof Standard features include: * Tires 27x8.5-15 NHS * Perkins engine (STAGE 5) 25 HP * Gear pump with foot pedal drive * No hydraulic oil cooler * Work light on front loader Isdpfxotui S Te Ahbetn * Hydraulic quick-change system for attachments * Extra hydraulic connection (front) DN12 * Traffic lights including mirrors * Pressureless return (front) * Counterweight Standard bucket included

Condition: new, sheet width 1050 mm plate thickness 2,0 mm distance between columns 1050 mm down holder 1 Stück fence Tisch 80 - 480 mm fence Breiten 0 - 600 mm table-size 1300 x 600 mm Itsdpsxabdhefx Ahben work height max. 760 mm total power requirement manuell kW weight of the machine ca. 413 kg. range L-W-H 2,0 x 1,04 x 1,6 m - Including adjustable stop on the work table for miter cuts - The knife can be lifted easily thanks to the counterweight on the back - Large work table for safe placement of the sheet metal plates - Sheets can be pushed through, i.e. longer sheets can be cut - Handwheel on the front to adjust the back gauge - Comes with a robust cast iron base as standard - Long service life thanks to knives made of quality steel - Standard with hold-down device including quick-release clamp - Robust machine construction for high stability Furnishing: - manual lever shears - stable execution - hold-down bars - Side scale with unit of measurement - Table stop / width stop

Year of construction: 1960, condition: good (used), machine/vehicle number: 970015, Load capacity with horizontal swivel plate position: 10 t Load capacity with vertical swivel plate position and center of gravity distance of 300 mm: 10 t Load capacity with vertical swivel plate position and center of gravity distance of 830 mm: 5.5 t Swivel plate dimensions: 1500 x 1500 mm Swivel plate speed, hydraulically continuously adjustable: 0.025 - 0.75 rpm Swivel range: 0 - 135° Swivel time for full swivel range (to): 140 s Swivel time for full swivel range (from): 120 s Hydraulic drive: 380 V Itsdpfx Ahjcblc Sjbjn Height of the swivel axis above the floor: 1450 mm Space requirement: 3800 x 1950 x 1800 mm Weight approx.: 3.5 t Weight of the counterweight: 2.3 t

Condition: new, functionality: fully functional, This listing is for information purposes only and does not constitute a legally binding offer. The WARRANTY applies exclusively to machines purchased DIRECTLY from us, not from other dealers. KINGWAY DEUTSCHLAND is the only authorized stationary specialist dealer for the Kingway brand on the German market, with its own dedicated service department. ORDER YOUR MACHINE FROM A DEALER OPERATING NATIONWIDE ACROSS GERMANY! WHEN PURCHASING FROM US, YOU ARE GUARANTEED SERVICE AND THE POSSIBILITY TO MAKE WARRANTY CLAIMS – UNLIKE WITH OTHER DEALERS. Model: ZL918 Neon Operating weight: 4,150 kg Max. load capacity: 1,800 kg Bucket capacity: 0.65 m³ Dumping height: 2,850 mm Itedpfx Ajyk Sngohbsn 4-cylinder diesel engine: 36.8 kW / 2,200 rpm Hydraulic pressure: 16 MPa Steering angle: ±35° Turning radius: 4,500 mm Tyres: 20.5 / 70-16 Ground clearance: 200 mm Travel speed: 28 km/h Dimensions: 5,050 x 1,750 x 2,520 mm FEATURES: - Exceptionally high-quality and robust build - Lockable cab, fuel tank, and engine hood - Heating / ventilation - Rear-view camera - Spacious comfort cab - Easy handling - Highly maneuverable - Compact and versatile - Fully road-compliant lighting system - Hydraulic quick-coupler system - Dedicated hydraulic circuit for attachments - CE certified according to the latest standards and directives - Purchase possible WITHOUT VAT (only with valid VAT ID) - FINANCING available SCOPE OF DELIVERY: - FREE delivery within a 200 km radius - Wheel loader / yard loader ZL918 NEON - Including 4-in-1 bucket + pallet forks - Hydraulic quick coupler - Joystick control - 4x4 all-wheel drive - Float position For each of our loaders, you can additionally order: - Tow bar, - Counterweights, - Any type of accessory, such as push brooms, grapple buckets, snow ploughs, high-volume buckets, sweepers, grab buckets. PRICE: EUR 20,000 net EUR 23,800 gross

Condition: new, Long belt sanding machine LMD2500 incl. deburring tool - NEW - Delivery time on request Ijdpfxeg I Ipks Ahbstn The LMD 2500 is a long belt machine with a flexible sanding belt that allows for the processing of both flat surfaces and corners or material edges. This machine is ideal for processing irregular shapes, removing weld seams, and deburring and rounding laser-cut parts. The flexible and motor-adjustable table is perfect when the workpiece cannot be easily moved due to its large dimensions. With the LMD2500, you utilize the adaptability of the long belt together with different sanding tools such as a sanding shoe, manual pad, and deburring brush or disc to process the required areas. - Sanding of flat surfaces with the contact roller - Stroke finishing with a flat pad - Sanding of weld seams - Deburring of laser-cut parts - Processing of large areas - Interchangeable finishing tools - Flexible deburring/edge rounding station - Pneumatic belt tension - Tool carrier with counterweight system - Contact roller tool - Flat tool - Manual backing pad 100*80mm - Sanding belt with variable speed (8-25 m/s) - Edge rounding tool - Includes: o Deburring disc holder Ø150mm Medium SH hardness o Sanding disc Ø150mm g120 ceramic with hook-and-loop backing x5 o Surface finishing disc Ø150mm with hook-and-loop backing o Edge rounding brush Ø150mm. Fine aluminum oxide o High-adhesion rubber mat (1000x600mm) for small parts o Brush speed 600-1700 rpm o Sanding belt 7800x120 mm

Condition: new, Year of construction: 2025, functionality: fully functional, The A3 is the standalone series of portable measuring arms from the Trimos A-Line. Its key feature is its compact size, allowing you to take it anywhere without needing to assemble it. The 6-axis configuration arm is available with measuring ranges of 1.3 m and 1.8 m. Carbon fiber tubes and an aluminum mounting base give the A3 arm an extremely stable yet lightweight construction. With its mass balancing system, outstanding handling is guaranteed. Iodsw Dzxvjpfx Ahbstn The most precise range Extreme portability No special set-up required Autonomous operation thanks to the integrated wireless system Fixed or interchangeable probe Permanent counterweight for perfect, stable, and long-lasting balance Integrated Bluetooth system USB connectivity option Buttons mounted on the probe for improved measurement sensitivity A3 Models: A3 - 1300 Measuring range (m): 1.3 Axes: 6 Accuracy (mm): 0.016*1 Weight (kg): 9.5 A3 Models: A3 - 1800 Measuring range (m): 1.8 Axes: 6 Accuracy (mm): 0.020*1 Weight (kg): 10.4 Operating temperature: +5 to +40 °C Relative humidity: 90% non-condensing Conformity mark: CE Power supply: 110 - 220 V / 50 - 60 Hz Ingress protection: IP 54 Connectivity: Bluetooth and USB Battery autonomy: >8 h Certification: ISO 10360-12 up to 3.2 m      ISO 10360-2 above

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,600 kg, maximum load weight: 13,400 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,750 mm, loading space width: 2,480 mm, total length: 9,925 mm, total width: 2,550 mm, total height: 3,150 mm, suspension: air, tire size: -, tire condition: 100 %, Additional Information Tandem Platform Trailer Type TPS 180, Standard construction with forklift mount Chassis: Central axle trailer Fine-grain steel welded construction Outer frame slightly angled, new design with Load-Lock profile for securing tie-down straps 1 pair of geared support legs at the front, with straight lower part and single-sided operation on the right-hand side Partial wheel arches 2 plastic toolboxes, with drawer and insert, w=650 / h=520 / d=670 mm, lockable with a padlock Mount for a carried forklift at the rear, including 2 fork pockets, 2 extendable support tubes, and a mount for chain securing with a locking pin. Underrun protection with light unit that can be folded away. The forklift mount shifts the axles to the rear; please consider load distribution when driving without a forklift. Customer risk! Note! Forklift mount! Carrying a forklift can significantly reduce the vertical load. Counterweight at the front is required! On wet and slippery roads, additional ballast weight or a load at the front of the trailer, weighing at least 2 tons, is necessary; the speed should then be reduced, and the driving style adapted to the road and driving conditions. The forklift must always be secured with chains during transport. The distance between the lift mast and the trailer body should be a maximum of 45 mm, or the vertical forklift tines must rest against the forklift pockets at the end. We assume that the towing vehicle does not have a steering or lift axle, or that the steering axle is always locked or the lift axle is always on the ground. Coupling System: Central axle trailer Drawbar with tested 50 mm drawbar eye, freight forwarding design Lower coupling on the drawbar Folding mount with spring support on the drawbar, for guiding the connecting cables to the truck Axles + Suspension SAF disc brake axles with 430 mm disc diameter Laser-measured axle/suspension to reduce tire wear and fuel consumption Air suspension with raise and lower valve 1st axle: automatic lift axle with proximity switch, for lift axle Wheels and Tires 385/65R22.5, according to manufacturer's choice Steel rims, factory silver Braking System 2-line pneumatic braking system Spring-loaded parking brake Vehicle - Driving Stability System Duomatic connection at the front, with connecting cable to the towing vehicle, connection on the right-hand side EBS, Electronic Braking System with EBS plug at the front, with connecting cable Itjdpfendwdhex Ahben Attention: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrical System 24 Volt, multi-chamber lights in LED, side yellow LED lighting, license plate lighting in LED

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 21_0346, NEW - NEVER USED heavy-duty positioner for manual or robotic welding - lifting and turning device. Special Device for Special Tasks designed and produced by FÖRSTER welding systems GmbH. Max diameter of the workpiece: 2500 mm Max weight of the workpiece: 20 tons Dimensions of the welding positioner: 7000x3000x3750 mm Weight [without counterweigh]: 20 000 kg Overall dimensions of the whole system: 8900x4800x3750 mm Ijdpfx Asurlcrshbetn Total weight of the whole system: 40 000 kg Counterweight included with the machine. Full documentation available. Manufacturer's technical support on request. Machine located in central Poland.

Condition: new, Working width 4000 mm Working height 2600 mm Number of cylinders 6 St. Dimensions (L/W/H) 5300 x 1250 x 3330 mm S&S frame press type RP 2000, ----- C E - version Stable frame welded construction made of thick-walled special hollow profiles, Sliding carriage and pressure bar with 50 mm hole pattern. Continuous abutment on the left for width compression, lower abutment in two levels. Vertical press cylinder on special pressure bar with one-hand quick adjustment with weight compensation in the 50 mm hole pattern, height-adjustable, long Sliding carriages ensure the permanent absorption of high pressing forces. Fast, smooth width adjustment with ball-bearing carriage Central locking, fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and with Equipped with counterbalance. Lower horizontal press cylinder with center holes for the two Abutment levels, with weight compensation. Abutment and pressure plate depth 100 mm Printing plate and support width 130 mm Machine electro-hydraulically controlled, with 2 vertical pressure cylinders d = 50 mm, stroke 120 mm double-acting, with counterweight and One-hand quick adjustment, 2 pieces Horizontal pressure cylinders d = 40 mm, stroke 120 mm double-acting, with weight balancing; 2 manual control valves, Pressure gauge, 1 pressure control valve from 20 to 125 bar corresponds to 400 to 2400 kg pressure vertical, with 3 kW three-phase motor for 400 volts, 50 Hz operating voltage. Complete with electrical connection. Paint finish: RAL 7035 light gray with RAL 7016 anthracite grey Working size: 4000mm x 2600mm (length x height) Required space: 5300 x 1250 x 3330 mm (L x W x H) Iodpfxou Uvale Ahbstn Machine including the following options: ----- Article .00 pc Medium pressure bar with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve up to 2600 mm high Article .00 pc Individual pressure control for medium pressure bar, Pressure control range up to max. 100 bar (for pressing crossbar windows) Article .00 pc Cross printing device complete with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve There is no weight compensation on the lower horizontal cylinder Article .00 pc Individual pressure control for transverse pressure device, Pressure control range up to max. 100 bar (for pressing crossbar windows) Article .00 pc Shut-off valve on the 3rd vertical cylinder Article .00 pc Shut-off valve on the upper horizontal cylinder Article .00 pc Width allowance for compression of small frames to bridge the 1st pressure beam, including shut-off valve on the 1st vertical cylinder Article .00 pc Basic equipment for counter profiles The space required in height increases by 100 mm Item All pressure plates and abutments covered with plastic Article .00 pc Triangle studio window pressing device consisting of: locking device of Vertical pressure bar and 3 attachable, side-guided pendulum pressure plates Article .00 pc double pendulum pressure plate for pointed windows (triangle) ----- Total price in the above version ex works: On request! ----- Options: Article ....

Condition: new, 9D715US crankshaft balancing machine is adapted for balancing crankshafts of various designs, including crankshafts of V6, V8, V10 and V12 engines, with balancing weights on the connecting rod pins: - Balancing of crankshafts of any design - Shaft weight up to 300kg - Shaft length up to 1400mm - Drilling module for unbalance correction The machine design allows balancing crankshaft separately, as well as crankshaft complete with flywheel and clutch, which guarantees minimum unbalance during engine operation. MACHINE HIGHLIGHTS • Hard-bearing supports - safe operation with high initial unbalance at low speeds. • Roller cassettes with large diameter spherical rollers and provide the required accuracy for balancing heavy shafts. • Replaceable antifriction prismatic V-blocks allow balancing of crankshafts with low mass or with special bearing journals. • Narrow support stands of the machine allow balancing of crankshafts with complex configuration and with “narrow” bearing journals. The 9D715US machine has a cassette width of 27 mm, which is the best in its class. • For balancing V-shaped crankshafts, the machine can be equipped with counterweights (variable weight) to simulate the weight of connecting rods. • A vertical drilling module mounted on its own guides allows unbalance in the crankshaft counterweights to be corrected directly on the machine. • The frequency converter drive provides smooth acceleration and deceleration of the electric motor and infinitely variable speed control of the rotor. MEASUREMENT AND CONTROL • We make balancing easier - the main advantage of our balancing systems. • The balancing process is displayed in real time and the unbalance behaviour of the rotor is monitored on the screen to achieve the best possible result. • Measuring balancing system has additional necessary functions for crankshaft balancing: - recalculates the unbalanced mass to the drilling depth, taking into account the drill diameter and the permissible drilling depth. - It recalculates the unbalance on several correction planes, so that unbalance can be corrected in neighboring crankshaft counterweights. Iodpfx Ahewk Ittsbetn SPECIFICATIONS Weight range of balanced rotors 3 - 300 kg Maximum rotor diameter (above the bedding) 1100 mm Diameter of rotor support journals 20 - 140 mm Distance between centres of rotor journals 150 – 1350 mm Support type Rollers / V-blocks Transmission element for rotor rotation Belt Minimum achievable residual specific unbalance 0.4 g.mm/kg Rotor speed range 300 – 1500 rpm Electric motor power 2.2 kW Parameters of the supply network 380V, 3 Ph, 50Hz VTM Group balancing machines will allow you to do your job well and get positive feedback and attract more customers. Do you need a machine for a different load capacity, diameter or length? We manufacture balancing machines for every needs. Please contact us to get the best offer! 👇

Condition: new, Year of construction: 2018, Special features of the gantry design: Gantry design with a low center of gravity, wide bearing separation and optimum stiffness to mass ratio. The granite guideways ensure a uniform thermal, dimensional, torsional and geometric stability of the machine. 24 air bearings for smooth movement of the three axes. High dynamics for better performance, the machine can achieve high accelerations like comparable medium and large CMMs. Itodped Ambtofx Ahbsn Thermally compatible materials and components minimize the influence of ambient temperature fluctuations on measurement results, Air filter and regulator. Z-axis pneumatic counterweight system. Granit table with thread inserts of size M10. Passive vibration isolation pads Software: metrolog AN Scan Standard Geosurf Advanced SP Step converter I ++ interface Technical specifications Measurement paths: X: 1200mm Y: 2000mm Z: 1000mm Max workpiece weight: 1200kg Weight of the measuring system: 5700kg Overall dimensions: 3020x2190x3750mm Accuracy according to DIN EN ISO 10360-2 or ISO 10360-4: Volumetric probing deviation: MPEP = 2.9μm Volumetric length measurement deviation: MPEE = 2.9+ L / 350 (μm) Environmental conditions: Room temperature standard: 18-22 ° C Operating temperature 10-35 ° C Air Supply: Minimum air pressure: 6bar Air consumption: 120NI / min

Condition: new, fuel type: gasoline, overall weight: 1,300 kg, operation weight: 1,200 kg, maximum load weight: 1,500 kg, lifting height: 1,000 mm, Year of construction: 2026, Equipment: hydraulics, Befard XM1200 - NEW TECHNICAL SPECIFICATION: • Lifting capacity 1200 kg - PICK&CARRY • Lifting capacity 1500 kg - with optional equipment • 3 hydraulic extensions • Arm opening angle 65 degrees • Vertical reach 10 m - with optional equipment • Non-marking tracks • Extendable chassis in the range of 780-1250 mm • Radio control • Column rotation 50 degrees • Knee gear • Possibility of using a 500 kg or 990 kg winch - optional • LED lighting fixed + magnetic AVAILABLE POWER SUPPLY VERSIONS: 3in1 - petrol engine, electric motor (230 V, 400 V, 110 V to choose from) and lithium-ion batteries Combustion - powered only by internal combustion engine, Combustion electric - powered by internal combustion engine and electric 230 V, 400 V or 110 V OPTIONAL EQUIPMENT AVAILABLE: • Winch 500 kg or 990 kg to choose from • Manual JIB arm - increases the reach by 1 m - You can use 2 pcs. Manual Jib for the crane • Searching hook - works in 6 positions, increases the reach by 0.5 m • Hydraulic blade - An additional support blade at the front of the machine extends manually and lowers hydraulically. Additional options are available for the blade: • Forks • Tow hitch: Increases stationary lifting capacity to 1500 kg. Increasing the stationary lifting capacity to 1500 kg and the possibility of using an additional Jib arm • Radio control with display • Platform for standing on the machine - Platform for standing on the machine, as an increase in counterweight (not necessary in standard use) • Extension to the loading platform - Removable extension to the loading platform by approx. 500 m • Suction cup with hydraulic head - Suction cup with hydraulic head controlled from the remote control. Possibility of removing the suction cup and installing the hook. Head mounted at the end of the hydraulic extension • Holder for XP attached to the platform - Holder for XP glass gripper attached to the platform • RAL color - Choice of machine color from the RAL palette • Tow hook - Possibility of using a tow hook for the crane's transport platform • Ramps - Aluminum ramps 2.5 m long Befard XM1200 is a modern mini Pick & Carry crane designed for maximum functionality and mobility in difficult working conditions. Thanks to its compact dimensions, it easily fits through a standard door, and extendable tracks up to 1250 mm wide ensure stability and safety during crane operations. This versatile model offers an impressive reach of up to 10 meters - which allows work at the height of the second floor. The XM1200 mini crane can move with a load of up to 1200 kg, and with the use of support legs its maximum lifting capacity increases to 1500 kg. Optional equipment in the form of a winch additionally increases the flexibility of applications, making the XM1200 mini crawler crane an ideal solution for assembly, service, industrial or construction work. Possibility to test the equipment before purchase. Isdex A Uc Ajpfx Ahbjtn * The price in the offer refers to the basic version powered by a petrol engine * ​​Product on order * Net price

Condition: new, fuel type: gasoline, overall weight: 1,500 kg, operation weight: 1,600 kg, maximum load weight: 1,600 kg, lifting height: 1,110 mm, Year of construction: 2026, Equipment: hydraulics, Befard XM1600 WITH HYDRAULIC JIB - NEW TECHNICAL SPECIFICATIONS: • Lifting capacity: 1250 kg - PICK & CARRY • Hydraulic jib lifting capacity: 650 kg • Lifting capacity: 1600 kg with blade • Standard support blade Additional blade options: • Forks • Tow hook • 3 hydraulic extensions Itjdpfoyrf D Dex Ahbjn • Boom opening angle: 65 degrees • Vertical reach: 10 m - with optional equipment • Non-marking tracks • Extendable undercarriage: 780-1250 mm • Radio control • Column rotation: 50 degrees • Toggle gear • Optional 500 kg or 990 kg winch • Fixed and magnetic LED lighting AVAILABLE POWER SUPPLY VERSIONS: 3-in-1 - petrol engine, electric motor (230 V, 400 V, 110 V available) and lithium-ion batteries Diesel - powered only by the petrol engine Diesel-electric - powered by a petrol engine and a 230 V, 400 V, or 110 V electric engine OPTIONAL EQUIPMENT AVAILABLE: • 500 kg or 990 kg winch (optional) • Manual jib arm - extends reach by 1 m - Can be used with two manual jib cranes • Searcher hook - works in 6 positions, extending reach by 0.5 m • Radio control with display • Platform for standing on the machine - Platform for standing on the machine to increase counterweight (not necessary in standard use) • Load platform extension - Removable load platform extension 500 m • XP Mount - Mount for the XP Glass Grabber - Mount for the XP Glass Grabber • RAL Color - Choose your machine color from the RAL palette • Tow Hook - Option to attach a tow hook to the crane's transport platform • Ramps - 2.5 m long aluminum ramps The Befard XM1600 is a modern pick-and-carry mini crane designed for maximum functionality and mobility in challenging working conditions. Its compact dimensions easily fit through standard doorways, and the extendable crawlers, up to 1250 mm wide, ensure stability and safety during lifting operations. This versatile model offers an impressive reach of up to 11.2 meters – enabling work at second-story height. The XM1600 mini crane can move loads up to 1250 kg, and with the dozer blade, its maximum lifting capacity increases to 1600 kg. The optional winch further enhances application flexibility, making the XM1600 mini crawler crane ideal for assembly, service, industrial, and construction work. Test equipment before purchase. * The listed price is for the basic gasoline-powered version. * Product available upon request. * Net price.

Condition: used, functionality: fully functional, Year of construction: 1999, Type: Potain 21 B Factory No.: 76196 Slewing: Lower slewing Maximum boom length (m) / Lifting capacity: 29 m / 0.65 t Minimum boom length (m): 11.20 m Isdpfx Aez Nxf Hehbotn Hook height Maximum lifting capacity: 2 t at a specified outreach Ground space required (supports): 3.6 x 3.6 m Slewing radius: 1.9 m Power supply: 32 A (12 kVA) "Transport and assembly requirements (approx.) (up to 50 km transport radius)": Loading crane axle 1 truck + trailer Counterweights (tons) for transport: 12 t Year of manufacture: 1995

Condition: new, functionality: fully functional, power: 26.48 kW (36.00 HP), color: red, overall weight: 2,800 kg, Year of construction: 2024, operating hours: 1 h, Equipment: 4 in one shovel, all wheel drive, cabin, pallet forks, We deliver machines to any European country! The FARMER 811 PRO wheel loader is one of our most popular models. We have been selling it for 10 years, meaning that hundreds of satisfied customers rely on it. Equipped with a 4-cylinder, 36 HP engine and a 2-speed transmission, this is a reliable machine for all industries. Its strong and robust design ensures operation under all conditions. TECHNICAL SPECIFICATIONS: - Manufacturer: KINGWAY DEUTSCHLAND e. K. - Model: 811 PRO - Full cab with heating, ventilation, road and work lighting, rear-view camera, radio - Hydraulic quick coupler - Suspension seat ENGINE DETAILS: - Engine: Yunnei DEF20NJF4 - Diesel Iedpfx Aevz U Sxshbstn - Cylinders: 4 - Emission standard: Euro 5 - Max. rated output: 18.2/25 kW / 25/36 HP at 2,800 rpm - Max. torque: 66.9 Nm at 1,600 rpm - Cooling system: Water-cooled - Noise level: 101 dB - Power supply: 12V - Battery: 12V / 120 Ah DRIVE: - Drive unit: Torque converter (2 driving ranges) - 4x4 wheel drive - Travel speed (range 1): 0-8 km/h - Travel speed (range 2): 8-20 km/h CAPACITIES AND PRESSURES: - Fuel tank capacity: 40 liters - Hydraulic oil tank capacity: 55 liters - Max. hydraulic oil flow: 48 L/min - Max. hydraulic pressure: 180 bar WEIGHTS: - Operating weight: 2,800 kg - Max. tipping load: 1,800 kg - Max. lifting capacity (at mount): 1,000 kg DIMENSIONS: - Steering angle: 42° - Turning radius (inner/outer): 2,350 mm / 4,200 mm - Lift height (lower edge of standard bucket): 2,580 mm - Dumping height (with standard bucket): 2,080 mm - Dumping angle: 39° - Standard bucket: 0.5 m³ capacity - Overall length: 4,650 mm - Overall width: 1,600 mm - Overall height: 2,450 mm - Track width: 1,270 mm - Wheelbase: 2,140 mm TYRES: - Standard: 31x15.5-15 agricultural tread - Optional: 10-16.5 industrial tread FEATURES: - Very high-quality, robust construction - Standard Euro mount - Lockable cab, tank and engine hood - Heating / ventilation - Rear-view camera - Spacious comfort cab - Easy operation - Extremely maneuverable - Compact and highly versatile - Lighting system / road lighting - Hydraulic quick-change system - Third hydraulic circuit for attachments - CE certified to the latest standards and guidelines - Sale available net of VAT (with VAT ID only) - FINANCING available SCOPE OF DELIVERY: - FREE delivery within 200 km - One FARMER 811 wheel loader / yard loader - Including bucket + fork (4-in-1 bucket available on request) - Hydraulic quick coupler - Joystick control - 4x4 all-wheel drive - EURO MOUNT - ROAD APPROVAL - Float position - Operating permit for Germany For any of our loaders you can also order: - Trailer coupling - Additional counterweights - Any possible accessories such as scraper, grapple, snow plow, high-volume buckets, sweeper, grab bucket PRICE: €17,800 net €21,182 gross WARRANTY: - Each machine comes with a 12-month warranty, extendable for an additional year. - After the warranty expires, we ensure access to all spare parts for our customers. SERVICE: - We have our own mobile service, which supports all our customers both within and outside of Germany.

Condition: new, fuel type: gasoline, overall weight: 1,300 kg, operation weight: 1,200 kg, maximum load weight: 1,500 kg, lifting height: 1,000 mm, Year of construction: 2026, Equipment: hydraulics, Befard XM1200 - NEW TECHNICAL SPECIFICATION: • Lifting capacity 1200 kg - PICK&CARRY • Lifting capacity 1500 kg - with optional equipment • 3 hydraulic extensions • Arm opening angle 65 degrees • Vertical reach 10 m - with optional equipment • Non-marking tracks • Extendable chassis in the range of 780-1250 mm • Radio control • Column rotation 50 degrees • Knee gear • Possibility of using a 500 kg or 990 kg winch - optional • LED lighting fixed + magnetic AVAILABLE POWER SUPPLY VERSIONS: 3in1 - petrol engine, electric motor (230 V, 400 V, 110 V to choose from) and lithium-ion batteries Combustion - powered only by internal combustion engine, Combustion electric - powered by internal combustion engine and electric 230 V, 400 V or 110 V OPTIONAL EQUIPMENT AVAILABLE: • Winch 500 kg or 990 kg to choose from • Manual JIB arm - increases the reach by 1 m - You can use 2 pcs. Manual Jib for the crane • Searching hook - works in 6 positions, increases the reach by 0.5 m • Hydraulic blade - An additional support blade at the front of the machine extends manually and lowers hydraulically. Additional options are available for the blade: • Forks • Tow hitch: Increases stationary lifting capacity to 1500 kg. Increasing the stationary lifting capacity to 1500 kg and the possibility of using an additional Jib arm • Radio control with display • Platform for standing on the machine - Platform for standing on the machine, as an increase in counterweight (not necessary in standard use) • Extension to the loading platform - Removable extension to the loading platform by approx. 500 m • Suction cup with hydraulic head - Suction cup with hydraulic head controlled from the remote control. Possibility of removing the suction cup and installing the hook. Head mounted at the end of the hydraulic extension • Holder for XP attached to the platform - Holder for XP glass gripper attached to the platform • RAL color - Choice of machine color from the RAL palette • Tow hook - Possibility of using a tow hook for the crane's transport platform • Ramps - Aluminum ramps 2.5 m long Befard XM1200 is a modern mini Pick & Carry crane designed for maximum functionality and mobility in difficult working conditions. Thanks to its compact dimensions, it easily fits through a standard door, and extendable tracks up to 1250 mm wide ensure stability and safety during crane operations. This versatile model offers an impressive reach of up to 10 meters - which allows work at the height of the second floor. The XM1200 mini crane can move with a load of up to 1200 kg, and with the use of support legs its maximum lifting capacity increases to 1500 kg. Optional equipment in the form of a winch additionally increases the flexibility of applications, making the XM1200 mini crawler crane an ideal solution for assembly, service, industrial or construction work. Possibility to test the equipment before purchase. Iodpfx Aswkgq Rjhbjtn * The price in the offer refers to the basic version powered by a petrol engine * ​​Product on order * Net price

Condition: new, Year of construction: 2007, Storage location number: 100102375 Transport dimensions (L x W x H): 0 x 0 x m, outreach including counterweight Itsdozkznhjpfx Ahbon Lifting mechanism: 65 kW Power supply cable: 60 m Lighting transformer: 4.7 kVA Radio system: HBC Central lubrication system Assembly platforms Undercarriage: 6.0 m track width Tower sections for 30 m hook height Location: Nuremberg