Used Counterweight for sale (203)

Condition: new, machine/vehicle number: 745183e095a8a43501797c66c, axle configuration: 2 axles, first registration: 12/2022, tire size: -, Further information Tandem platform trailer Type TPS 180 Standard building material with forklift bracket Weights and dimensions: Total weight: 18000 kg Unladen weight (basic version) approx.: 4600 kg +/- construction tolerance Payload approx.: 13400 kg Drawbar load: 1000 kg Overall length approx.: 9925 mm Overall width max.: 2550 mm Overall height approx.: 3150 mm Interior length approx.: 7750 mm Interior width approx.: 2480 mm Platform height approx.: 1200 mm Towing height approx.: 380 mm Towbar length approx.: 2150 mm Chassis central axle trailer Fine-grained steel welded construction Outer frame slightly slanted new design with Load-Lock profile for tensioning strap attachment 1 pair of gear support legs at the front, with straight lower section and single-sided operation in FR right 2 wheel chocks with holder Aluminum side bumpers Steel underride guard Quarter-shell mudguards 2 plastic toolboxes, with drawer and shelf, w=650 / h=520 / d=670 mm, lockable with a padlock (lock not included) Bracket for truck-mounted forklift at the rear, including 2 fork pockets, 2 extendable support tubes, bracket for chain safety device with pin. Underride guard with light unit can be folded away. Including 2 loose rubbers to protect the rear wall, we recommend counterweight! Please note! Partially low ground clearance with forklift, poor tracking behavior possible, without warranty! (Forklift tare weight up to max. 1900 kg for trailers). (With proximity switch for forklift control in conjunction with lift axle) The axles are shifted backwards by the forklift bracket, observe load distribution when driving without forklift. Customer risk! Note! Forklift bracket! Carrying a forklift truck can lead to a considerable reduction in the drawbar load. Front counterweight required! On wet and slippery roads, an additional ballast weight provided by the customer or a load of at least 2 tons at the front of the bulkhead is required; the speed must then be reduced and adapted to the roads and driving behavior. The truck must always be secured with chains while driving. The distance between the lift mast and the body must be max. 45 mm or the vertical forklift tines must be in contact with the forklift pockets at the end. We assume that the towing vehicle has no steering or lift axle, or that the steering axle is always locked or the lift axle is always on the ground. Towing equipment for central axle trailers Towing bar with tested 50 mm towing eye, forwarding version (not suitable for trucks with tail lift) Tjdpfx Afsndwdhs Tsf Towbar under-coupler Folding bracket with spring support on the drawbar, for guiding the connecting cable to the truck Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured Reduction of tire wear and fuel consumption Air suspension with lift & lower valve 1st axle automatic lift axle with proximity switch, for lift axle (only for driving with forklift) Wheels and tires 385 / 65 R 22,5 according to manufacturer's choice Steel rims factory silver Brake system 2-line compressed air brake system Spring-applied parking brake Vehicle stability system Duomatic connection at the front, with connecting cable to the motor vehicle, connection in FR-right EBS, electronic brake system with EBS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, LED multi-chamber lights, amber LED lighting on the side, LED lic

Condition: good (used), Code: 0352 Brand: OMW VALENTINI Model: 700 Pit clamp for chairs, for assembling classic, modern, style chairs etc. Technical data: Assembled steel frame Useful pit mm 700 x 700 N° 4 cylinders with adjustable stroke that can be moved on the plane Tedpfx Afot Eul As Tef Counterweight Foot pedal for simultaneous operation of the 4 cylinders Compressed air 7-8 atm Overall dimensions mm 1300 x 920 x 750 h Weight kg 700

Condition: used, mileage: 9,860 km, lifting height: 36,000 mm, Year of construction: 2023, operating hours: 1,060 h, Drivetrain Tedevbapvspfx Af Tjf Drive: Wheel Weights Empty weight: 29.900 kg Identification Serial number: 783801 Other information Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Tyre brand: Bridgestone Carrier engine: - Upper engine: - Counterweight: 0 Transport dimensions (LxWxH): 9.99x2.55x3.9 Additional information Please contact PFEIFER GROUP for more information

Condition: used, color: white, lifting height: 74,000 mm, Year of construction: 2013, Drivetrain AdBlue system: Yes Make of engine: Liebherr Functional Mast: lattice Mast length: 7.400 cm Lifting capacity: 300.000 kg Identification Serial number: 138 203 Other information Emission level: Stage IV / Tier IV final Delivery terms: EXW Counterweight: 124000 Production country: AT Additional information Please contact Christiaan Dekker for more information Liebherr LR1300SX Year : 2013 Hours: 26223 Low winch(working ) hours: 3700 Tsdpfx Afsxpnv No Tsf CE & EPA Automatic Greasing system Hookblock & jibball Tilt cabin 74 meter boom Aux. short jib Machine in excellent condition Full counterweight Tier 4 engine

Condition: used, Year of construction: 2022, operating hours: 361 h, load capacity: 6,000 kg, lifting height: 30,000 mm, fuel type: diesel, construction height: 3,100 mm, gearing type: automatic, Equipment: cabin, head guard, Magni RTH 6.30 SH Tree Felling Crane ? Year of manufacture: 2022 ? Operating hours: only 316h! KEY FEATURES - Westtech WOODCRACKER® CS 750 Smart (cutting diameter 75cm) - Protective grille for front windshield - Enclosed boom - Boom wipers for the extensions - LED headlights on boom and cab - Camera system (cameras mounted at the front, side of the boom, and rear on counterweight) - Advanced radio remote control with sawing function and stabilizer control - 40 km/h or 20 km/h speed option - Vibration dampers - Support pads with holders EQUIPMENT - Maintenance-free wet multi-disc brakes on front and rear axles - Comfort seat with weight adjustment and armrests - Spacious, pressurized cab with air conditioning and heating - Operation via the intuitive 10-inch touch pad with navigation knob - ROPS/FOPS cab with optimal all-round visibility - 360° continuous rotation - 12V cab power outlet - Automatic leveling of scissor outriggers - Attachment recognition - Levelling system on wheels - Road lighting compliant with StVZO - TÜV package and TÜV approval - Customizable maneuver settings - Fork carriage with 1,200mm forks Tjdpfxoxpar Aj Af Tef FIELDS OF APPLICATION - Safe dismantling of trees in sections - Specialized tree removal in urban areas or residential zones - Maintenance work along roads and utility corridors - Felling problematic trees - Tree felling on slopes and embankments - Ideal for municipal applications - Removal of storm damage - Traffic safety and path clearing Optional: ? Westtech WOODCRACKER® CS 750 Smart (cutting diameter 75cm) = Price: +€20,000 net We are official sales and service partners for Magni telehandlers, Westtech Woodcracker, JCB construction machinery, Mercedes-Benz, and Iveco. With over 800 used commercial vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the entire Westtech Woodcracker range! Financing and leasing options available upon request. Further information can be found on our homepage. Subject to prior sale and errors excepted!

Condition: like new (used), functionality: fully functional, power: 168 kW (228.42 HP), gearing type: automatic, fuel type: diesel, color: yellow, overall weight: 19,450 kg, empty load weight: 19,450 kg, operation weight: 19,450 kg, tire size: 26.5R25, tire condition: 90 %, emission class: euro5, shovel volume: 3.3 m³, Year of construction: 2023, operating hours: 1,310 h, Equipment: ABS, UVV, additional headlights, air conditioning, all wheel drive, cabin, cruise control, differential lock, low noise, onboard computer, Hyundai HL960A Wheel Loader Year of manufacture: 2023 Operating hours: 1310 Bucket with cutting edge 3.3 m³ 40 km/h machine Tsdpjwwt N Hofx Af Tof Rain protection cover Brake accumulator Standard rear counterweight 870 kg Smart Key + Start/Stop button 4 LED cabin lights LED beacon Rearview camera LED driving headlights Combination LED light Piping for 3rd hydraulic circuit Central lubrication system Beka Piping for quick coupler Joystick steering Standard lifting frame BKT-GP (Hook On) (3.3 m³) With emergency steering Vibration damping Rear mudguards 5-speed transmission (torque converter) Quick coupler ISO SW (V) Triangle radial tires Control block (MCV) with 3 sliders Air-suspended, heated seat Road homologation (DE) lo Electrohydraulic joystick Rear window blind Wheel chock Front axle with LS differential lock Differential with slip limitation

Condition: used, Working width 4000 mm Working height 2600 mm Number of cylinders 6 St. Dimensions (L/W/H) 5300 x 1250 x 3330 mm S&S frame press type RP 2000, ----- C E - version Stable frame welded construction made of thick-walled special hollow profiles, Sliding carriage and pressure bar with 50 mm hole pattern. Continuous abutment on the left for width compression, lower abutment in two levels. Vertical press cylinder on special pressure bar with one-hand quick adjustment with weight compensation in the 50 mm hole pattern, height-adjustable, long Sliding carriages ensure the permanent absorption of high pressing forces. Fast, smooth width adjustment with ball-bearing carriage Central locking, fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and with Equipped with counterbalance. Lower horizontal press cylinder with center holes for the two Abutment levels, with weight compensation. Abutment and pressure plate depth 100 mm Printing plate and support width 130 mm Machine electro-hydraulically controlled, with 2 vertical pressure cylinders d = 50 mm, stroke 120 mm double-acting, with counterweight and One-hand quick adjustment, 2 pieces Horizontal pressure cylinders d = 40 mm, stroke 120 mm double-acting, with weight balancing; 2 manual control valves, Pressure gauge, 1 pressure control valve from 20 to 125 bar corresponds to 400 to 2400 kg pressure vertical, with 3 kW three-phase motor for 400 volts, 50 Hz operating voltage. Complete with electrical connection. Tjdpfx Asu Uvalef Tof Paint finish: RAL 7035 light gray with RAL 7016 anthracite grey Working size: 4000mm x 2600mm (length x height) Required space: 5300 x 1250 x 3330 mm (L x W x H) Machine including the following options: ----- Article .00 pc Medium pressure bar with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve up to 2600 mm high Article .00 pc Individual pressure control for medium pressure bar, Pressure control range up to max. 100 bar (for pressing crossbar windows) Article .00 pc Cross printing device complete with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve There is no weight compensation on the lower horizontal cylinder Article .00 pc Individual pressure control for transverse pressure device, Pressure control range up to max. 100 bar (for pressing crossbar windows) Article .00 pc Shut-off valve on the 3rd vertical cylinder Article .00 pc Shut-off valve on the upper horizontal cylinder Article .00 pc Width allowance for compression of small frames to bridge the 1st pressure beam, including shut-off valve on the 1st vertical cylinder Article .00 pc Basic equipment for counter profiles The space required in height increases by 100 mm Item All pressure plates and abutments covered with plastic Article .00 pc Triangle studio window pressing device consisting of: locking device of Vertical pressure bar and 3 attachable, side-guided pendulum pressure plates Article .00 pc double pendulum pressure plate for pointed windows (triangle) ----- Total price in the above version ex works: On request! ----- Options: Article ....

Condition: used, Year of construction: 2025, operating hours: 53 h, SUNWARD SWE20F Year of manufacture: 2025 Approx. 53 hours (may increase due to demonstrations) Operating weight: 1.94 t Engine: Yanmar 3-cylinder diesel engine 3TNE88 Japan Power: 13.4 kW/2200 rpm Telescopic undercarriage: 99–132 cm wide Foldable dozer blade 2 travel speeds Articulated boom (can work directly against walls and hedges) Long dipper arm, digging depth 238 cm Load-holding valve Pump: Kayaba Japan 2x proportional joystick controls LED headlights Radio with SD/USB 2x auxiliary hydraulic lines (for grab/hammer/shear) 1x quick coupler hydraulic lines With genuine counterweight—unlike replicas, which only have a sheet metal cover in the rear, risking machine tipping Todpexmua Aofx Af Tjf 4 years remaining warranty according to manufacturer's policy Including MS01 30 cm and 50 cm digging buckets 1 m fixed ditch-cleaning bucket Price: €19,500.00 net Optional: 1 m hydraulic ditch-cleaning bucket for an additional €500 net. All information without guarantee. Take advantage of this unique opportunity to get a professional-grade machine at an unbeatable price. Sunward is among the world’s 20 largest excavator manufacturers. Viewing possible at any time by appointment. Trade-in of your used machine possible. We are your authorized Sunward dealer for the following regions: District of Wittenberg, District of Nordsachsen, District of Leipzig, City of Leipzig, District of Elbe-Elster, District of Oberspreewald-Lausitz, City of Cottbus, District of Spree-Neiße, District of Oberhavel, District of Barnim, District of Märkisch-Oderland, City of Frankfurt (Oder), District of Oder-Spree, District of Dahme-Spreewald, District of Teltow-Fläming, District of Potsdam-Mittelmark, City of Potsdam, City of Brandenburg, District of Havelland, City of Berlin.

Condition: used, mileage: 280,163 km, lifting height: 35,500 mm, Year of construction: 2014, operating hours: 7,979 h, General information Field of application: Construction Serial number: 782002 Drivetrain Drive: Wheel Weights Empty weight: 31.787 kg Functional Lifting capacity: 15.000 kg Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: Bridgestone Carrier engine: - Upper engine: - Counterweight: 0 Transport dimensions (LxWxH): 0x0x0 Additional information Tsdpfxsvf A Trj Af Tjf Please contact PFEIFER GROUP for more information

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/1998, total width: 2,500 mm, total height: 1,550 mm, ROR axle(s), drum brake system, air suspension, support winch(s), trailer for mobile crane - counterweights/counterweights Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we will be happy to provide you with an offer from our partner workshops! The vehicle can be covered with advertising and/or labeled. Our general delivery and payment conditions apply. We would be happy to provide you with a financing or leasing offer for this object. Please contact us! Tjdpfx Afovnm The Tef

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 5,915 h, load capacity: 5,000 kg, lifting height: 4,630 mm, free lift: 1,430 mm, fuel type: electric, mast type: triplex, construction height: 2,350 mm, drive type: Elektro, Electric 4-wheel forklift ISO class: ISO class 3 = 2,500 - 4,999 kg Todpfxjv Efghs Af Tof Mast type: Triplex Transmission: Automatic Technical condition: very good Front tyres type: Superelastic Front tyres condition: 60 - 80% Rear tyres type: Superelastic Rear tyres condition: 80 - 100% Battery voltage: 80V Battery capacity: 930Ah Battery year: 2021 Description: Price includes new safety inspection (we only use original Still parts), counterweight freshly painted, battery from 2021 will be overhauled and tested with Kappa test at 90%, suitable charger with plug included. We are happy to organize cost-effective transport for you. Leasing with option to buy is possible! Sideshift, fork positioner, 3rd valve, 4th valve, rear working light, front working light, cabin heater, full cabin, full free lift, CE certificate, Multilever control

Condition: used, Year of construction: 2023, operating hours: 2,100 h, power: 37 kW (50.31 HP), maximum speed: 20 km/h, Operating hours: 2100_____with ROPS driver protection canopyKubota diesel engine D1803-CR-T37 kW = 50 hpRear counterweight – end plateHigh-speed gear 20 km/hHydraulic tool lockingRetention systemSpecial equipmentRear chassis with widened fendersCase weight 100 kgTyres 15.0/55-17 AS, 6-hole, ET -45Reinforced gear pump 19 ccm (37 kW engine required)LED work light kit, 800 lumens (2 front, 1 rear)Pickup frame Euro-WSHydraulic lockingTow device with bolt and lashing eyesLocation: Oberlauch Tedpfsxmrvujx Af Tsf

Condition: used, Year of construction: 2011, operating hours: 4,580 h, Well-maintained Komatsu PC 45 MR-3 mini excavator Technical data: * Operating weight approx. 4,600 kg * Engine: Komatsu 4D88E-6 EU Tier IIIA, 28.5 kW * Overall length: 5,300 mm * Overall height: 1,900 mm * Overall width: 2,600 mm * Max. digging reach: 6,130 mm * Max. digging depth: 3,770 mm Equipment includes: * 2 travel speeds with auto shift-down * Closed-load sensing system * Servo controls * Monoblock boom 2,640 mm and long dipper arm 1,770 mm * 2-way auxiliary hydraulics to the boom (switchable for hammer operation) * Swing boom * Protective cover on boom lift cylinder * Work light on boom * Dozer blade Tsdpfx Aow Scdnof Tef * Audible travel alarm * Integrated counterweight * CE conformity * Suspension seat with seat belt * Rubber tracks * Foot pedal * Komtrax utility system * Mechanical quick coupler LEHNHOFF MS03 + lifting hook Other notes: * The machine was incorrectly labelled as PC55 at the factory * Hydraulic oil pump produces some noise * Comes with ditch cleaning bucket !!! ATTENTION: Sale only to commercial customers and export !!!

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 1,585 h, machine/vehicle number: HHKHK607CE0000762, Equipment: UVV, additional headlights, air conditioning, cabin, gripper hydraulics, hammer hydraulics, hydraulics, steel tracks, Year of manufacture: 2023 Operating hours: approx. 1,585 Engine: Cummins B6.7 Power: 129 kW (175 HP) at 2,000 rpm Emissions standard: EU Stage V Operating weight: approx. 22,100 kg Adjustable boom: 5,700 mm Stick: 2,400 mm Stick safety valves Boom safety valve Central lubrication system (Beka Max) Bucket linkage available 2-way hydraulic lines Proportional control LED work lights Adjustable boom: 5,680 mm Rearview camera Hi-Mate telematics system (mobile version) Roadliner tracks (600 mm) Tedpfx Ajxl R Iyjf Tsf Air-cushioned, heated operator seat Proportional joystick Standard safety railings Laminated front window 7 mm Fuel pump Piping for quick coupler Bucket/grapple mode switch No slew lock Hydraulic oil VG46 Rain cover 360° LED warning beacon Counterweight Standard Hyundai key

Condition: used, lifting height: 18,500 mm, Year of construction: 2016, Drivetrain Drive: Wheel Weights Empty weight: 3.600 kg Functional Lifting capacity: 2.700 kg Identification Serial number: AMC2213 Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Todpfxjxivwnj Af Tof Tyre brand: - Carrier engine: - Counterweight: 0 Transport dimensions (LxWxH): 4.15x1.1x1.96 Additional information Please contact PFEIFER GROUP for more information

Condition: ready for operation (used), functionality: fully functional, mileage: 16,579 km, power: 55 kW (74.78 HP), gearing type: other, fuel type: electric, color: green, number of seats: 1, DGUV certified until: 07/2026, next inspection (TÜV): 07/2026, Year of construction: 2016, machine/vehicle number: 416059, Equipment: UVV, air conditioning, cabin, crane, gripper hydraulics, hydraulics, low noise, For sale is a robust Baljer & Zembrod OBX V-8 material handler, ideal for demanding lifting and material handling operations. Tsdpfxjxl Rw Is Af Tsf This machine stands out thanks to its reliable engineering, powerful performance, and the renowned Baljer & Zembrod quality. The excavator has been used in timber handling and is therefore optimally configured for the requirements of this sector. Technical specifications: - Lifting capacity: 2,900 kg at 13 m (without grab) - Maximum outreach: 14.55 m - Net lifting torque: 380 kNm (without grab) - Slewing range: infinitely rotatable - Motor: 55 kW electric motor mounted on vibration dampers - Pump type: Rexroth - Operating hours: 16,579 h - Crane base dimensions: Length 4,900 mm, width 3,600 mm, height 1,200 mm - Base console height: 5.70 m Features & condition: - Semi-mobile crane base for heavy-duty crane with base console for crane and supply unit - Additional ballast weight for stability without anchoring to the concrete slab (usable only in combination with counterweight) - All inspections and maintenance performed regularly, with a complete service history - Solid, immediately operational machine - Suitable for timber handling, recycling, port handling, or heavy-duty applications - Air conditioning - Protective ventilation with activated carbon filter (Wickfelder MCC 60) for the operator's cab - Sound and thermal insulation - Comfort seat with high backrest and side-mounted control elements for crane operation

Condition: new, Year of construction: 2021, Long Belt Grinding Machine LMD2500 incl. Deburring Tool - NEW - Delivery time on request The LMD 2500 is a long belt machine with a flexible abrasive belt that allows the processing of flat surfaces as well as corners or material edges. This machine is ideal for machining irregular shapes, removing welds and deburring and rounding laser cut parts. The flexible and and motorized height-adjustable table is perfect when, due to large dimensions, the workpiece to be machined cannot be easily moved. With the LMD2500, take advantage of the adaptability of the long belt along with different sanding tools such as sanding shoe, manual pad, and deburring brush - or disc - to finish the areas you need. - Grinding flat surfaces with the contact roller. - Stroke finishing with flat pad - Grinding of weld seams - Deburring of laser cut parts - Processing of large surfaces - Interchangeable finishing tools - Flexible deburring/edge rounding station - Pneumatic belt tensioning - Tool carrier with counterweight system - Contact roller tool - Flat tool - Manual pad 100*80mm - Abrasive belt variable speed (8-25m/s) Tsdpfxjg I Ipko Af Tjf - Edge rounding tool - Including: o Deburring disc holder Ø150mm medium SH hardness o Grinding disc Ø150mm g120 ceramic with velcro support x5 o Surface finishing disc Ø150mm with Velcro backing o Edge

Condition: new, Year of construction: 2023, Lifting capacity on extended arm 500 kg, Powertilt, hydraulic quick coupler and grapple hydraulics Dead weight approx. 2100 kg 3 cylinder Yanmar with 13.7 kW / 18.6 HP Tele-chassis 2 driving speeds Dozer blade with removable extension Proportional auxiliary hydraulics Hammer line and grapple hydraulics Full LED lighting on cab roof 2 x front, 2 x rear 1 x on the arm Cab with ventilation and heating Radio with exclusive loudspeaker Rain canopy on the front of the cab Tsdpfx Astrnb Sef Tsf LED rotating beacon Additional counterweight 130 kg Powertilt with Lehnhoff MS01 hydraulic quick coupler

Condition: not inspected (used), JAFO FYN 50 NB – CNC Vertical Milling Machine For sale is a CNC vertical milling machine from JAFO, model FYN 50 NB, year of manufacture 1988. The machine is fully operational and ideal for precise milling operations on workpieces up to 700 kg including clamping device. ⸻ Technical Data • Travel (X/Y/Z): 800 × 500 × 500 mm • Table working area: 500 × 1,400 mm • Number of T-slots: 7 • Slot width: 18 mm • Slot pitch: 63 mm • Max. longitudinal table travel: 800 mm • Max. vertical knee travel: 500 mm • Max. transverse spindle head travel: 500 mm • Feed rate: stepless 0–4,000 mm/min • Spindle taper: ISO 50 • Head swivel angle: ±45° • Distance spindle axis to vertical guides: max. 590/90 mm • Spindle speed: 56–1,800 rpm • Rapid traverse: 4,000 mm/min • Spindle drive motor power: 5.5 kW • Operating voltage: 380 V, control voltage 24 V • Total power consumption: 10 kW • Dimensions (L×W×H): 2,080 × 1,700 × 2,260 mm • Total weight incl. hydraulic unit: 4.5 t ⸻ Equipment & Features • Vertical, swivelling milling spindle on a transversely adjustable ram • Hydromechanical tool clamping system • Separate feed drives with DC motors and permanent magnets • Power transmission via toothed belt to preloaded ball screws • Automatic lubrication system for spindle drive and guideways • Hydraulic counterweight for the knee • Manual adjustment via electronic handwheel • Heidenhain control at the swivelling control panel, control cabinet mounted on the machine base • Documentation and operating manual included • Additional images and videos available upon request ⸻ The machine is immediately ready for operation. • Inspection possible at any time • Europe-wide transport available ⸻ Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices net plus VAT. Subject to modifications and errors. Tjdexk Tzgopfx Af Tsf

Condition: used, Fine boring head, spindle tool, boring head, bridge tool, fine boring head Tjdpfsqgpb Eex Af Tjf boring tool, boring spindle, boring bar Holder for bridge tool = SECO - epb GRAFLEX (Made in France) type A731 200 Boring head for bridge tool = SECO - epb GRAFLEX (Made in France) type A731-010 Boring block for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731-500 Counterweight for bridge tool = SECO - epb GRAFLEX (Made in France) type A731-600 Tool holder: GRAFLEX holder size G7 = Ø 46 mm Machining diameter: 200-280 mm Adjustment accuracy: 0.01 mm Machining depth without extension: max. 140 mm - Adjustment by micrometer spindle and vernier (in steps of 0.01 mm, graduation 2.5 µm, to the diameter) - Cutting insert holder for Route cutting insert with approx. 10 mm edge length Total tool length with extension and mounting spigot: 184 mm Weight complete: 11.5 kg Very good condition, as good as new - probably unused

Condition: used, mileage: 10,350 km, lifting height: 35,000 mm, Year of construction: 2023, operating hours: 994 h, Drivetrain Drive: Wheel Weights Empty weight: 29.900 kg Tedpfxovbaqgo Af Tof Functional Lifting capacity: 19.640 kg Identification Serial number: 1190603 Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: Bridgestone Carrier engine: - Upper engine: - Counterweight: 0 Transport dimensions (LxWxH): 9.99x2.55x3.95 Additional information Please contact PFEIFER GROUP for more information

Condition: used, mileage: 278,061 km, Year of construction: 2009, Drivetrain Drive: Wheel Weights Empty weight: 72.000 kg Functional Lifting capacity: 150.000 kg Identification Serial number: 068506 Tedpfx Afow D N Rgs Tsf Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Tyre brand: Michellin Carrier engine: - Upper engine: - Upper hours: 15701 h Counterweight: 46800 Transport dimensions (LxWxH): 16.2x2.85x3.95 Additional information Please contact PFEIFER GROUP for more information

Condition: used, lifting height: 36,000 mm, Year of construction: 2023, Drivetrain Drive: Wheel Weights Empty weight: 29.900 kg Identification Serial number: 783703 Other information Tedjtr H Sxepfx Af Tjf Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Tyre brand: Bridgestone Carrier engine: - Upper engine: - Counterweight: 0 Transport dimensions (LxWxH): 9.99x2.55x3.9 Additional information Please contact PFEIFER GROUP for more information

Condition: used, lifting height: 36,000 mm, Year of construction: 2023, Drivetrain Drive: Wheel Weights Empty weight: 29.900 kg Identification Serial number: 783801 Tsdpsvbanlefx Af Tsf Other information Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Tyre brand: Bridgestone Carrier engine: - Upper engine: - Counterweight: 0 Transport dimensions (LxWxH): 9.99x2.55x3.9 Additional information Please contact PFEIFER GROUP for more information

Condition: used, mileage: 194,799 km, lifting height: 44,200 mm, Year of construction: 2011, Drivetrain Drive: Wheel Weights Empty weight: 33.000 kg Functional Lifting capacity: 40.000 kg Tjdpjwht U Defx Af Tsf Identification Serial number: WMG3208H8CZ000936 Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: Bridgestone Carrier engine: - Upper engine: - Counterweight: 0 Transport dimensions (LxWxH): 8.7x2.5x3.6 Additional information Please contact PFEIFER GROUP for more information