Used Corrosion Protection Film for sale (14,524)

Condition: used, Year of construction: 2019, machine/vehicle number: FA76, Used ATLANTA srink wrapping machine - Year 2019Technical Specifications & Performance DataUsed Atlanta type shrink wrapper, manufactured in 2019 and supplied as two units. The equipment is configured for secondary industrial packaging with a current 3x2 pack layout, providing compact film-wrapped bundles for efficient handling, transport and distribution.Quantity: 2 unitsYear of manufacture: 2019Current pack configuration: 3x2Capacity: 40-45 packs/min, ( 2.400 - 2.700 Packs/hours).Installed power: 5.9 kWElectrical supply: 400 V, 50 HzOperating air pressure: 6 barAdvanced Automation & Control SystemsThis shrink wrapper is designed for automated bundle formation and film wrapping within an industrial packaging environment. Its dry-run capability supports testing, setup and verification procedures without product flow, helping operators check the packaging cycle before production operation.The machine uses a 400 V, 50 Hz electrical supply and requires compressed air at 6 bar. These utility requirements should be coordinated with the available site services during installation and recommissioning.Production Line Integration CapabilitiesThe Atlanta type shrink wrapper can be positioned downstream of bottling, labeling or other primary-packaging equipment to create stable multipacks. With its 3x2 layout, it is suited to packaging-line applications where grouped containers require film protection and a practical handling format.In a used bottling line or second hand industrial packaging installation, shrink wrapping equipment typically interfaces with infeed and discharge conveyors. It can support beverage production and other containerized products where bundled packs are required before palletizing, warehousing or distribution.Machine Condition & Maintenance HistoryBoth machines are used and were operational until dismantling. They are reported to be in perfect working order, with no spare-parts replacement required. The equipment was dismantled during the current year and is suitable for professional installation, commissioning and integration into a production line.Operational Performance & VersatilityWith a stated output of 40-45 packs per minute, this shrink wrapper is designed for consistent secondary packaging throughput. The 3x2 pack arrangement provides a defined bundle format for film-wrapped products, supporting orderly downstream handling in industrial packaging operations.Dry-run operation is available, allowing functional checks of the packaging sequence. This feature is useful during installation, line setup and routine operational verification.Installation Requirements & Site PreparationInstallation requires a 400 V, 50 Hz electrical connection, 5.9 kW installed power and compressed air at 6 bar. As the two units have been dismantled, site preparation should include suitable floor space, conveyor alignment, electrical connection and pneumatic supply routing for reliable integration with upstream and downstream packaging machinery.Safety Standards & Compliance CertificationThe shrink wrappers should be installed a... Fjdpfs Aia Etsx Ah Eopp

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 500 kg, total length: 28,650 mm, total width: 16,500 mm, total height: 25,230 mm, input voltage: 230 V, warranty duration: 24 months, About this machine: This pallet wrapper is a new machine in stock. This machine comes with a 24-month guarantee. On request, we can also offer you a matching drive-on ramp, a photocell for black detection or the matching machine film! About this model: Our ProfilineLP is a semi-automatic stretch wrapper that guarantees absolutely consistent results thanks to up to 32 storable programs. programs guarantees absolutely consistent results and thus reliably excludes the "human factor". "human factor". As space-saving as a pallet wrapper with a horseshoe plate and as robust as a closed system system - these are the advantages of this machine in a nutshell! With the electromagnetic brake, the tension of the film can be precisely adjusted in the individual steps (foot winding, winding up / head winding / winding down) in the programs. programs. The programs also allow you to set how fast the film carriage and turntable run. and turntable run. Head wrapping, foot wrapping and the overlap of the film at the end of the pallet can also be of the film at the end of the pallet can be saved for each program. In this way, you can store individual programs for each individual programs for each wrapping pattern to achieve ever more perfect wrapping results. results. The programs can be password-protected so that the user can only can only choose from the stored programs. With a weight of 500 kg, this model is designed for loads of up to 1200 kg. Our Profiline LP has a 1650 mm turntable and can wrap pallets up to 2500 mm high as standard. 2500 mm high as standard. Automatic detection of your pallets (via photocell) is a matter of course as well as adjustable head and foot wrapping. This model is our recommendation if you have limited space but require a professional & robust pallet wrapper that can be optimally adapted to your needs. adaptable to your needs Would you like a higher mast, pre-stretching of the film or an automatic film section? Almost anything is possible with this machine! We would also be happy to configure this machine for you as a new machine with the options to suit your needs. Fodpo Ah E Erefx Ah Eepp About us: Business is done between people - we are convinced of that! A supplier delivers the goods you order - a partner can do more: he helps you find the best goods. He supports you in achieving your goals! They are also there to help you with problems and challenges! That is our conviction. For over 40 years and now in the 4th generation, we have been the partner of small and medium-sized businesses for all aspects of stretching and gluing. On request, we will also be happy to advise you on which pallet wrapper from our portfolio is the best solution for your requirements!

Condition: new, Year of construction: 2026, overall weight: 280 kg, total length: 23,740 mm, total width: 15,000 mm, total height: 20,750 mm, input voltage: 230 V, About this machine: This machine comes with a 24-month warranty. Upon request, we can also supply you with a suitable loading ramp, a photoelectric sensor for black object detection, or the appropriate machine film! About this model: Our "Starter" pallet wrapper is a semi-automatic stretch wrapper, perfect for those who no longer want to wrap pallets by hand or are seeking an affordable backup unit. Our Vogel Starter is likely the most economical pallet wrapper produced in Europe, without compromising on quality. In contrast to our other pallet wrappers, the range of options on this model is limited, as our aim here was to design a highly standardized pallet wrapper that covers most applications at a cost-effective price. With three programs, you can set both the speed of the film carriage and the turntable, and choose between “cross wrapping” or “up only” wrapping. Top and bottom wraps can also be saved to each program. The brake tension is easily adjusted via the mechanical film brake. Access to the programs can be password-protected, allowing the operator to choose only from the saved settings. This model weighs 280 kg and is rated for loads up to 1200 kg. Our Starter pallet wrappers feature a 1500 mm turntable and can wrap pallets up to 2100 mm high as standard. Automatic pallet detection (using a photoelectric sensor) comes standard, as do adjustable top and bottom wraps. Should the wrapper need to be relocated, it can be easily lifted and moved with a forklift using the integrated fork slots. Fpsdpj Ah E Dqsfx Ah Eep This model is our recommendation if you want to move away from manual wrapping and are looking for a robust machine made in Europe. About us: Business is about people – that is our conviction! A supplier delivers the goods you order – a partner does more: they help you find the best solution. They support you in achieving your goals! They also stand by your side when problems and challenges arise. That is our philosophy. For over 40 years and now in the 4th generation, we have been the partner to small and medium-sized enterprises when it comes to “stretch wrapping and adhesive bonding.” If you wish, we are happy to advise you on which pallet wrapper from our portfolio best fits your requirements!

Condition: ready for operation (used), functionality: fully functional, total height: 1,300 mm, total width: 2,500 mm, total length: 3,500 mm, overall weight: 6,500 kg, LIDKÖPING 4B – Centerless cylindrical grinding machine For sale is a used centerless cylindrical grinding machine from the Swedish manufacturer LIDKÖPING, model 4B. The machine is designed for centerless external cylindrical grinding of rotationally symmetrical workpieces and features a grinding wheel and regulating wheel drive, as well as hydraulic adjustment devices. Technical data: - Manufacturer: LIDKÖPING, Sweden - Model: 4B - Machine type: Centerless cylindrical grinding machine - Power connection: Three-phase, 50 Hz - Grinding wheel diameter: approx. 508 mm - Grinding wheel width: 254 or 305 mm - Grinding wheel drive: 37 kW - Regulating wheel drive: 4 kW Fedpfx Ahe Ah Si Us Espp - Hydraulic drive: 2.2 kW - Machine weight: approx. 6,500 kg - Machine dimensions: approx. 3,500 × 2,500 × 1,300 mm - Separate hydraulic unit - Workpiece feeding/transport device - SKF lubrication unit - Adjustment handwheels for the machine axes - Grinding area with protective covers - Additional control cabinet Condition: Used industrial machine with signs of wear and tear, paint chipping, and visible corrosion spots due to age and use.

Condition: like new (used), Year of construction: 2023, operating hours: 180 h, functionality: fully functional, machine/vehicle number: ITR1822394, total height: 1,800 mm, space requirement length: 800 mm, space requirement width: 800 mm, space requirement height: 1,800 mm, motor manufacturer: Otto Klein, power: 52 kW (70.70 HP), operating pressure: 30 bar, type of cooling: air, For sale is a professional high-pressure compressed air station from Atlas Copco, model LT7-30UV BM. The unit was manufactured in 2023 and is in excellent, almost as-new condition. With only 179.9 operating hours, the machine is barely broken in. The LT series from Atlas Copco is the benchmark for industrial high-pressure applications and is renowned for its extreme durability, low operating temperatures, and long service life. A particular highlight is the premium, hot-dip galvanized 350-liter air receiver, specially designed for high-pressure use (up to 36 bar operating / 51.5 bar test pressure) to offer maximum corrosion protection. Technical Data Manufacturer: Atlas Copco Model: LT7-30UV BM Year of manufacture: 2023 Condition: Excellent / Nearly new Operating hours: approx. 180 h Max. operating pressure: 30 bar (435 psi) Free air delivery: 6.4 l/s (~ 23 m³/h) Motor power: 5.16 kW 400V / 3 phase / 50 Hz Speed: 1,500 rpm Receiver: 350 liters, hot-dip galvanized Certifications: CE, EAC, UKCA Reference number: 8115460928 Serial number: ITR1822394 On request, transport and loading can be arranged Europe-wide for an additional fee. Price plus VAT. Inspections available by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sales Fpsdpfx Aey Anb Ieh Esp PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production facility? Or would you like to sell your equipment? For further information or to get in touch, please visit our website.

Condition: new, axle configuration: 3 axles, color: white, Equipment: ABS, - Air suspension EUROMIX TO GO – immediately available new vehicles in stock at Porta Westfalica. Completely assembled, directly from the manufacturer – ideal for short-term capacity expansion or replacement investment. Price negotiable – please contact us. EuromixMTP 12 cbm mixer semi-trailer EuromixMTP - Truck-mounted mixer unit EM 12 R - Standard Model: EM 12 R Nominal volume 12 m³ ready-mix concrete Mixing drum in standard design Mixing drum in standard design made of S355 material Mixing spirals in standard design made of S420 MC material Gearbox, manufacturer: ZF P5300 Hydraulic pump: Bosch Rexroth Hydraulic motor: Bosch Rexroth Oil cooling system integrated Mixing control: mechanical and start/stop electrical Compressed air water system Water connection at the platform with hose line Water filling line, one-sided with C-coupling Mixing drum with a service hatch Ladder with platform Rubber attachment on the filling hopper Swiveling, single-arm discharge chute made of steel Wear plates in filling hopper, discharge chute, and swiveling chute Drum locking mechanism to secure the drum during maintenance work Polyurethane primer Weight approx. 4,725 kg, deviations +/- 5% With emergency stop function according to EU safety technology Fenders made of steel over the rear axles 2x extension troughs made of steel or plastic Water system Water tank 650 l (compressed air) Water tank steel Shut-off valve mounted below the water tank in the filling line Water connection "C" coupling Operation & Electrical system Mounted on EuromixMTP 3-axle semi-trailer Vehicle type: EuromixMTP KIS 24 3-axle truck-mounted mixer chassis Axles with short steering ratio (310/340) for ready-mix applications Axle 9t SAF 22.5" disc brake, single tire for air suspension Axle track: 2040 mm (standard dimension) Axle spacing approx. 1400 mm / 1400 mm EBS braking system Tires 385/65 R 22.5 Plastic fenders, 180 degrees, above each axle (for 3 axles) Chassis paint in RAL 9005 deep black KTL coating with zinc phosphating plus powder coating, highest corrosion protection (only if powder coating color is available) Tire pressure control, basic version, connected to the EBS CAN bus system 24-ton telescopic support legs with one-sided operation and Semi-circular design with base plate Axle loads: 24,000 kg (3 x 8,000 kg, technically: 3 x 9,000 kg) Chassis length approx. 8570 mm Your advantages • Immediately ready for use: concrete pumps, concrete mixers, dump trucks, roll-off tippers • Chassis, body, and assembly from a single source Fpjdpsym Sy Uefx Ah Eop • Fair prices • Financing in 19 countries in Europe • Trade-in of your used vehicle Your contacts • Denis Omeragic: German, English, Bosnian, Croatian, Serbian • Henri Omeragic: German, Bosnian, Croatian, Serbian • Harun Cevik: German, English, Turkish • Jamila Azzi: French, Arabic • Olga Tissen: German, Russian • Karolina Cyburt: Polish EuromixMTP GmbH, Gänsekamp 7, 32457 Porta Westfalica Year of manufacture: 2026 Design year: 2026 Usable material: Concrete GVWR: 44,000 kg Brand of body: ...

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, Production orientation: Vertical Conveying system: Infeed and outfeed optional and dependent on product Film feed: Rear Forming shoulder: Fixed Operator display: Touchscreen with memory function Drives & controls: 3 servo motors and PLC control system Packaging length: 50–190 mm Packaging width: 50–150 mm (depending on film width) Packaging height: Dependent on forming shoulder Speed: 15–30 bags/min, depending on material, pack size, and product Film width: 110–320 mm Power consumption: Approx. 4.6 kW Machine material: “304 stainless steel with surface treatment” Printer bracket: Suitable TTO or ink wheel printer optionally available at extra charge Delivery time: Current lead time under 10 weeks Z-conveyor system: €8,500 Features: Stainless steel configuration, suitable for the food industry • Application for granules and small parts such as screws • Sectors: Pet food, food (coffee, nuts), metal industry • Simple touchscreen operation with color icons • Safety protection covers • Can be integrated upstream/downstream with other machines • Customer-specific modifications/designs on request • 12-head scale integrated, hopper 0.8L Additional options (on request and at extra cost): • Euro hole punch etc. Production orientation: vertical Fjdeq Ikhaspfx Ah Espp

Condition: used, This listing is for a Ormandy Newade WFI 2000l Storage Vessel. The unit is in full working condition and is ready for immediate release. This Unit was installed new in 2015 by Freestead Process Technology Ormandy Newade offers a specialized 2000l Water For Injection (WFI) storage vessel, designed to meet the highest requirements for water purity in the pharmaceutical industry. Key Features: Optimized Capacity: With a capacity of 2000 litres, this vessel is ideal for mid-sized operations, providing a balance between storage efficiency and space requirements. Configuration Flexibility: Available in both horizontal and vertical configurations, the design can be customized based on facility layout and operational needs. Insulation Options: The vessel can be fully or partially insulated, ensuring that the WFI is kept at a consistent temperature and protected from environmental influences. Material Excellence: Constructed from high-grade austenitic and Duplex stainless steel, ensuring superior corrosion resistance and longevity under rigorous conditions. Surface Finish Variety: Surface finishes from SF0 to SF6 are available, adhering to ASME BPE-2022 specifications, which is crucial for maintaining cleanliness and preventing contamination. Compliance and Standards: Industry Standards: This vessel is built to comply with key industry standards such as: PD5500 Fpode Ai Szpepfx Ah Eep ASME VIII EN 13445 FDA compliant with 3.B1+F material certification. CE Marking: It is CE marked in accordance with the Pressure Equipment Directive, affirming its safety and regulatory compliance for pressurized applications. Applications: Pharmaceutical Production: Perfect for storing purified water used in the formulation of medications, ensuring the highest levels of purity and compliance with regulatory standards. Biotechnology: Suitable for facilities requiring strict control over water quality in bio-processing applications.

Condition: new, power: 352 kW (478.59 HP), fuel type: diesel, tire size: 385/65-22,5, axle configuration: 6x4, wheelbase: 4,500 mm, fuel: diesel, fuel tank capacity: 390 l, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, suspension: steel-air, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, parking heater, power mirror, retarder, soot filter, trailer coupling, - Aluminum fuel tank - Rear work lights - Heated exterior mirrors - Heated mirrors - Passenger seat - Bluetooth - High beam - Speed limiter - Catalytic converter - Automatic climate control - Refrigerator - LED lighting - Air-suspended seats - Air horn - Particulate filter - PTO (power take-off) - Radio/multimedia system - Reversing camera - Sun visor - Stability control - Auxiliary heater - Pre-heating automatic - Toolbox - Windscreen Internal number for customer inquiries: 1-521 (reference vehicle) MAN TGS 28.480 6x4-4 with special tipper body and EPSILON Q170L115 loading crane. Specifically designed for tree care applications. Fedpfx Ajylunroh Eepp MAN TGS 28.480 6x4-4 BL: Driver Comfort Package Plus TGS Trailer package MAN D2676 LFAI diesel engine, 352 kW (480 hp) power, 2,400 Nm torque, Euro 6e Transmission: AN TipMatic 12.28 OD with Retarder 35 Transmission function: MAN EfficientRoll Transmission function: MAN Idle Speed Driving Transmission function: Rock-Free Mode 3rd axle steerable and liftable Suspension type: leaf/air (BL) on front axles and driven rear axles Daytime running light, LED Fog lights, H7 2 outline marker lights, LED Roof beacon, halogen, yellow, with function monitoring Work lights, LED, white MAN EasyControl operation panel, 4 functions, can be operated from outside when door is open Oil box, midsection, rearward MAN Mediasystem Navigation Advanced 7 inch MAN Soundsystem Advanced Tipper Body: Steel tipper body type 6024: - Dimensions: 5,954 x 2,381 x 2,538 mm / External height approx. 3,800 mm - Floor plate: 5 mm, HARDOX 450 - Side walls: 4 mm all round, HARDOX 450 - Front wall: 4 mm, HARDOX 450 Crane: EPSILON Q-Series Loading Crane - Q170L - EPSILON loading crane with high seat - Rated HC1/HD4/B4 - Lifting cylinder protection - Integrated operating hours counter and service interval display - Mounting hardware, surface treated against corrosion - Clamps 8x M30x1.5x1000 mm, mounting plates, nuts, protective caps QL97_1 - L-arm system 9.7 m, special conversion to QL11.50_1 - L-arm system 11.5 m - Double telescopic extension - Outreach: 11.5 m - CEH-N7_1 - CE wood package with N7 for the DE safety package wood - Compliant with EN12999 for timber cranes - 7° safety shutdown with tilt switch - Start-stop with emergency stop - RPM adjustment +/- - Seat heating Financing / hire purchase as well as leasing / partial amortisation leasing available through our leasing partner. For further questions, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors and modifications. General information Cab: Local traffic Technical information Number of cylinders: 6 Engine capacity: 12,419 cc Gross vehicle weight: 26,000 kg Axle configuration Brakes: Drum brakes Front axle: Tyre size: 385/65-22.5; Steered; Suspension: leaf suspension Rear axle 1: Tyre size: 315/80-22.5; Differential lock; Suspension: air suspension Rear axle 2: Tyre size: 385/65-22.5; Lift axle; Steered; Suspension: ...

Condition: new, maximum load weight: 31,400 kg, overall weight: 45,000 kg, axle configuration: 2 axles, loading space length: 6,800 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 300 mm, Year of construction: 2026, Equipment: ABS, DOLL NEXT DOLL NEXTLowbed tera T2P-S3FS21 – 2-axle lowboy trailer from the rapidly available rapid series by DOLL Fahrzeugbau GmbH, Oppenau – straight from the heart of the Black Forest. Ideal for demanding applications in tough off-road environments, challenging terrain, and for daily use on construction sites. Depending on availability, very fast delivery and operational readiness thanks to DOLL's rapid series production. Individually configurable according to your specific requirements and wishes. Technical Data * Permissible Gross Weight: 45,000 kg * Unladen Weight: approx. 13,600 kg * Payload: approx. 31,400 kg * Running gear: 2 x 12t pendulum axles * Extendable lowbed * Vehicle width: 2,550 mm * Load height (loaded): 300 mm * Wheelbase: 1,360 mm Equipment Features * Detachable gooseneck for significantly easier and faster loading and unloading * Smooth telescoping for efficient handling * High-quality spray galvanization for optimal corrosion protection and reduced downtime * Powder-coated and hot-dip galvanized attachments: robust and durable – no rust Your Key Benefits at a Glance * Rapid availability Fodpfxjyytm Re Ah Espp * Robust & reliable – proven technology, ideal even in demanding conditions * Made in Germany – manufactured by DOLL Fahrzeugbau GmbH in Oppenau, a company with over 145 years of experience in premium vehicle engineering Smart Technologies Our innovative approach combines quality, performance, and cost-effectiveness at the highest level. The rising demand for our lowbed semi-trailers drives the continuous development of state-of-the-art technologies in series production. Contact & Location Manufactured by DOLL Fahrzeugbau GmbH, Industriestraße 13, 77728 Oppenau (headquarters and production site) * The vehicles can be demonstrated either at the factory or at selected reference customers across Germany, together with one of our field sales representatives, depending on customer location.

Condition: used, Pfeiffer DUO 65, Two-Stage High-Performance Rotary Vane Pump Here, we offer a Pfeiffer DUO 65, two-stage, high-performance rotary vane pump. Pfeiffer DUO 65, Two-Stage High-Performance Rotary Vane Pump Two-stage, high-performance rotary vane pump with a pumping speed of up to 70 m3/h. Fpsdpjzianqefx Ah Ejp With 3-phase motor. With temperature sensor (3TF) for optimal motor protection. Integrated gas ballast and HV safety valve. For all applications in the rough and fine vacuum range. Duo 65, 3-phase motor, 3TF, 200-230 / 346-400V, 60 Hz Type: PK D46 642 A Includes: ONF 35/65 oil mist separator, corrosion-resistant version. Mounts on the pump's exhaust port and prevents air pollution from oil mist. Type: PK Z40 150 Scope of delivery: (See picture) The unit comes from a warehouse clearance. We also offer express shipping (DHL, UPS, TNT). We are happy to answer any further questions you may have over the phone. Written orders can be placed via email or fax.

Condition: new, axle configuration: 2 axles, loading space length: 6,800 mm, loading space width: 2,440 mm, loading space height: 1,000 mm, suspension: air, tire size: 385/55-22,5, wheelbase: 5,140 mm, color: white, = Additional Options and Accessories = - LED lighting - Air suspension = Remarks = Internal reference number for customer inquiries: 1-497 PAVIC BPA 18E flatbed trailer, offering an excellent price-performance ratio thanks to the use of top-brand components! * Drawbar extendable by 600 mm, continuously adjustable with height adjustment via 2x tension springs * Towing eye ø 40 mm * Tyres: 4x 385/55 R 22.5 premium tyres mounted on steel rims, aluminum rims available at extra cost * Air-suspended axles, 2x 9t; free brand selection by Pavic (SAF/BPW/JOST) * Lifting and lowering system on both axles Loading area (internal): approx. 6,800 mm x 2,440 mm, side wall height approx. 1,000 mm Details: * Side walls made of 25 mm aluminium hollow profiles, foldable with lifting aid * Tailgate foldable and removable, with integrated folding step on the inside * Front wall approx. 1,200 mm high with sheet metal cladding including XL safety certificate!!! * Outer frame with chamfer and lashing holes on the sides and on the chamfer, no lashing rings * Transversely laid plywood floor * Forklift protection, 3 sides (left + right + rear) * Lateral underrun protection on both sides * Toolboxes (optional, at extra charge) * LED lighting * WABCO/Knorr EBS braking system with Roll Stability Program * Chassis coating/painting: KTL with zinc phosphating plus powder, highest corrosion protection (only with powder color availability) or hot-dip galvanized, as desired For further questions, our sales team will be happy to assist you. Financing available through our financing partners. This is a non-binding offer. Subject to prior sale, errors, and changes. = Further Information = Axle configuration Tyre size: 385/55-22.5 Brakes: Disc brakes Suspension: Air suspension Fodpfx Aheziktkj Espp Front axle: Steered Weights Unladen weight: 3,750 kg Payload: 14,250 kg gross vehicle weight: 18,000 kg Functionality Body manufacturer: PAVIC Construction Material Premium Body Condition General condition: very good Technical condition: very good Visual condition: very good

Year of construction: 2025, operating hours: 1 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: SFERA21Kommission4, Stretch winder ATLANTA SFERA Easy 6 programs can be saved individually Winding height 2150mm Mast height 2050 mm (fits through almost every door) Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm GMK (compass) The start and end of the winding is always identical Manual line formation Tension of the film can be saved in 4 steps TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm Fedpfez Inavox Ah Eepp ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), machine/vehicle number: S23SFERA05, Mobile stretch winder ATLANTA SFERA Easy TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE Brake can be adjusted manually from the carriage by means of a tension roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Fedpfx Aez Indush Eopp Optional: stretch film with core Ø50mm or coreless stretch film Standard connection values: 230 V - 1L+N+PE - 50 HZ Optionally available: -winding height up to 3500mm -FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) - FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" 200% -FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% - FILM SLIDE TYPE “PS” (POWER STRETCH) 120-400% -Automatic line formation to strengthen the winding .Automatic system for cutting the film in 3 strips for “BANDEROLL WRAPS” - Machine version for temperatures down to -5° C -BATTERIES LITHIUM RELION 2 x 12V Other systems available from the Ludwigsburg warehouse. Illustration similar.

Year of construction: 2026, condition: as good as new (ex-display), machine/vehicle number: S23Synthesi3, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Fodpfx Aez Ipcloh Espp Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Optionally possible: FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge.

Year of construction: 2026, operating hours: 1 h, condition: like new (used), functionality: fully functional, machine/vehicle number: S23SynthesiWaage03, Exhibition machine, like new. SYNTHESI integrated with scale Pallet weighing system integrated in the machine FILM SLIDE TYPE “FE” (ELECTROMAGNETIC BRAKE) Foil application tension electronically controlled via control unit Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ TECHNICAL DETAILS: Turntable 1500mm (Optional 1650mm) Wrapping height (pallet included) 2,200 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change Fedpoz Ipdvjfx Ah Ejpp F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Other systems available from the Ludwigsburg warehouse.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25NEOS05, Mobile stretch winder NEOS TECHNICAL DETAILS: HMI touch panel 7" two maintenance-free AGM batteries 12 V - 120 Ah connected in series Standard charger: 230 V - 1L+N+PE - 50 HZ Autonomy 200 - 300 pallets per load High frequency battery charger with LED indicator Winding height machine (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop function of the machine according to CE standards Ø 22 mm ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: F01 - 01 - cross winding (up/down) F01 - 02 - Single wrap (up only or down only) F01 - 03 - Complete wrap cycle with foot wraps at the same starting height F01 - 04 - Fast cycle (with limited or no foil overlap) F01 - 05 - layer cycle F01 - 06 - Economical winding program Soft start cycle for applying edge protection Winding cycle with reinforcement and adjustable number of windings Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: Fjdpjz Ipk Nsfx Ah Eepp 99 storable winding programs All function parameters can be set via the display F00 - Screen lock program change Adjustable machine speed around the pallet up to 90 m/min Lifting carriage speed can be adjusted up and down independently of each other Lift carriage speed from 1.3 up to 5.4 m/min Lifting carriage speed down from 1.3 to 5.4 m/min Number of wraps on the pallet foot (1 - 10 wraps) Number of wraps on the pallet head (1 - 10 wraps) Adjustment pallet wrapping height Foil application tension foot & head winding / ascent & descent independently adjustable Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable Ergonomic height for foil change Display foil consumption (option for PRS - PS) FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE: Brake can be adjusted manually from the carriage by means of a tension roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Optional: stretch film with core Ø50mm or coreless stretch film Standard connection values: 230 V - 1L+N+PE - 50 HZ Optionally available: -winding height up to 3500mm -FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) -FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% - FILM SLIDE TYPE “PS” (POWER STRETCH) 120-400% - PATENTED "ARYA" SYSTEM FOR PRS / PS - ARYA system for automatic foil blowing and cutting, incl. infrared remote control -Manual cord formation on the foil carriage to strengthen the winding -Automatic cutting unit (FE, PRS & PS) - Machine version for temperatures down to -5° C (only version without HMI touch panel) Other systems available immediately from the Ludwigsburg warehouse Illustration similar.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23SynthesiLow04, Exhibition machine, like new. SYNTHESI with a flat turntable Turntable height 25mm Short ramp 500mm long Fsdpfoz Ipnhsx Ah Eopp TECHNICAL DETAILS: Turntable LOW PROFILE · Height 25mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · a ramp included Wrapping height (pallet included) 2,200 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically controlled via control unit Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ Total power: 1.2KW / 8A Optional: pinion for OPRS pre-stretching ratio of 150% / 250% / 300% possible Other systems available from the Ludwigsburg warehouse.

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23SynthesiLow05, Exhibition machine, like new. SYNTHESI with a flat turntable Turntable height 25mm Short ramp 500mm long TECHNICAL DETAILS: Turntable LOW PROFILE · Height 25mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · a ramp included Wrapping height (pallet included) 2,200 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Fedoz Ipwcspfx Ah Eepp Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically controlled via control unit Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ Total power: 1.2KW / 8A Optional: pinion for OPRS pre-stretching ratio of 150% / 250% / 300% possible Other systems available from the Ludwigsburg warehouse.

Condition: used, mileage: 64,000 km, power: 61 kW (82.94 HP), fuel type: gasoline, gearing type: mechanical, first registration: 06/2019, next inspection (TÜV): 06/2027, emission class: euro6, color: blue, number of seats: 2, Equipment: ABS, all wheel drive, * Sold on behalf of the customer * 1st owner * 2 seats * All-wheel drive * Trailer hitch * Roof rack * Front guard * Running boards * German vehicle WhatsApp: Fpodpfx Ae Ad Sm Sjh Esp Errors and prior sale excepted!! Sale is made with the exclusion of all warranties!! - We speak Russian - We speak English - We speak Polish - We speak Romanian - We speak Spanish Additional features: 2-seater, exterior mirrors electrically adjustable and heated, both, electric windows front + rear, windshield laminated glass, rear window wiper, inner fender rear, inner fender front, body: 3-door, catalytic converter, luggage compartment cover, headlight range adjustment, alloy wheels, model update, engine 1.7 L - 61 kW CAT, wheelbase 2200 mm, rear seat foldable, low emission according to Euro 6 emission standard, protective film door sill, rocker panel protection strips, side impact protection, seat heating front, solid color paint, underbody protection

Condition: used, Year of construction: 2026, FAN1500 Material Handling Fan – Compact Industrial Blower for Sawdust and Dust Extraction The CORMAK FAN1500 is a compact industrial material handling fan designed for efficient extraction and pneumatic transport of sawdust, wood chips, dust, and other dry particles generated during the processing of wood, plastics, and composite materials. Equipped with a 1.5 kW motor and a high-efficiency centrifugal impeller, it delivers an airflow of up to 3,000 m³/h, making it a reliable component of professional dust extraction systems. Key Advantages Airflow up to 3,000 m³/h – efficient extraction and transport of sawdust and airborne dust 1.5 kW / 400 V motor – designed for continuous industrial operation 2850 RPM operating speed – ensures strong and consistent airflow 150 mm inlet and outlet connections – easy integration into dust collection systems Compact dimensions (575 × 510 × 500 mm) – suitable for workshops with limited installation space Heavy-duty steel construction – durable and resistant to demanding workshop conditions Construction and Technology The FAN1500 features a direct-drive centrifugal fan with an aluminum impeller mounted directly on the motor shaft. This design minimizes power losses while maximizing aerodynamic efficiency. The powder-coated steel housing provides excellent protection against corrosion and mechanical damage, while the rigid one-piece construction reduces vibration and operating noise. The fan can operate as a standalone extraction unit or as part of a larger centralized dust collection system. Performance and Efficiency The high rotational speed combined with the optimized impeller geometry ensures smooth and consistent airflow, even in environments with heavy dust concentrations. The FAN1500 efficiently transports fine and medium-sized wood waste without clogging, making it ideal for continuous industrial operation in woodworking shops, CNC production facilities, and manufacturing lines. Applications Fedpo Afnuzefx Ah Eopp The CORMAK FAN1500 is suitable for: Woodworking workshops Furniture manufacturing facilities CNC machining centers with dedicated dust extraction Mobile dust collection systems Production lines generating sawdust and fine dust Plastic and composite material processing Standard Equipment Powder-coated steel housing 1.5 kW / 400 V three-phase motor Direct-drive centrifugal aluminum impeller 150 mm inlet connection 150 mm outlet connection Heavy-duty mounting frame Optional Equipment Flexible suction and discharge hoses (Ø150 mm) Adapters and reducers for different duct sizes Textile filter bags, cyclone separators, and final-stage filters Remote control and timer switch systems Technical Specifications Parameter Value Maximum Airflow 3,000 m³/h Inlet Diameter 150 mm Outlet Diameter 150 mm Motor Speed 2850 rpm Motor Power 1.5 kW Power Supply 400 V Dimensions (L × W × H) 575 × 510 × 500 mm Weight 32.5 kg PLEASE NOTE!!! This machine is a returned item; it has minor damage to the casing and bent grilles. It has been partially repainted. NO WARRANTY AND NO RETURNS!

Condition: good (used), Technical data for the pallet racking upright: Racking system: Dexion Type: P90 Included in the scope of delivery: 01x Pallet racking upright, used Material color: hot-dip galvanized Frame profile: 100|25 Profile dimensions: 100x90x2.50 mm Adjustment grid: 50|50 mm including cross and diagonal braces, base plates, upright protectors The uprights are pre-assembled (bolted frame) Height: 6,010 mm Depth: 1,450 mm Note: Hot-dip galvanized surface – ideal for outdoor use Fedsz Rmbrspfx Ah Espp Thanks to the high-quality hot-dip galvanized surface, the pallet racking uprights are optimally protected against corrosion and are therefore excellent for use outdoors. The galvanization ensures high weather resistance and a long service life – even under demanding weather conditions. Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: new, Year of construction: 2026, CORMAK KDMP400 Wet Sandblasting Cabinet The KDMP400 model has been designed for intensive industrial use. Its construction, made entirely of stainless steel, ensures high resistance to corrosion, moisture, and the abrasive effects of blasting media. As a result, the equipment maintains its durability and appearance even during prolonged operation in demanding conditions. The closed-loop water-abrasive circulation system produces a stable, homogeneous cleaning slurry, ensuring uniform surface treatment without the risk of overheating or damaging the workpiece. This process is particularly suitable for thin-walled components and parts requiring high-precision surface finishing. Key Advantages of the KDMP400 Blasting Cabinet - Dust-free sandblasting – eliminates airborne dust, allowing operation in enclosed spaces. - Stainless steel construction – provides maximum resistance to corrosion and humid environments. - High processing precision – ideal for components requiring accuracy and repeatability. - Safe operation – no sparking and reduced risk of surface damage. - Closed-loop abrasive circulation – reduces abrasive media consumption. - Improved visibility – the absence of airborne dust allows full control over the blasting process. - Versatile applications – suitable for processing a wide range of materials. Applications The KDMP400 wet sandblasting cabinet is widely used in various industrial and service sectors, including manufacturing, component refurbishment, and precision finishing. The equipment is suitable for: - Aluminium wheel rim blasting – effective removal of paint, surface deposits, and oxidation. - Cleaning injection moulds and production tools – precise removal of contaminants from moulds and tooling. - Surface preparation – preparing components for powder coating, anodizing, and electroplating. - Stainless steel and aluminium processing – cleaning and finishing metal components. - Glass, ceramic, and plastic blasting – suitable for surfaces requiring matting or smoothing. - Post-processing of 3D-printed parts – cleaning and finishing components after 3D printing. Fsdpfo Abak Tex Ah Espp Design and Functionality The KDMP400 cabinet is manufactured from high-grade stainless steel, ensuring a long service life and resistance to water and abrasive media. The spacious working chamber allows comfortable handling of larger components, while the sealed construction prevents moisture and contaminants from escaping into the surrounding environment. The equipment features integrated working lights for improved operator comfort and an inspection window that provides clear visibility of the workpiece. Built-in protective gloves allow precise handling of components without direct contact with the blasting medium. The blasting process is controlled by a foot-operated valve, allowing the operator to use both hands while maintaining full control over the operation. The water-abrasive mixing system ensures consistent operating parameters and uniform surface cleaning. A compressed air supply is required for proper operation, as compressed air powers the blasting process. Technical Specifications Pump 550 W / 230 V / 50 Hz Pump capacity 230 l/min LED lighting 2 × 12 W Cabinet capacity 400 l Blasting medium volume 40–60 l Nozzle diameter Ø7 mm Operating pressure 4–8 bar Working area dimensions 900 × 600 × 800 mm

Year of construction: 2026, condition: as good as new (ex-display), machine/vehicle number: S23Synthesi07, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Fpjdpfxez Iqtfo Ah Esp Optionally possible: FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge.

Condition: new, power: 330.97 kW (449.99 HP), fuel type: diesel, axle configuration: 4x4, fuel: diesel, color: red, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6, number of seats: 6, Year of construction: 2026, Equipment: ABS, additional headlights, air conditioning, airbag, central locking, differential lock, parking heater, power assisted steering, trailer coupling, truck registration, From our range of new vehicles, we offer you: Tank Firefighting Vehicle TLF 4000-Crew 4x4 All-Wheel Drive on off-road capable SCANIA P450 XT chassis Demanding operations require high-quality and efficient equipment. Our TLF 4000-Crew on Scania ensures fire crews, technology, and large quantities of extinguishing agents arrive quickly and safely at their destination. Chassis: • SCANIA P450 XT 4x4 EURO 6 with 450 HP (331 kW) • Automated gear transmission • Off-road tires, dual tires on rear axle for high driving stability • Front winch available upon request Cab: • Standard SCANIA CREW CAB crew cab (1:5) in RAL 3000 (fire red) Fedpfxjyh N Nys Ah Ejpp • Standard 4 SCBA holders in crew compartment • Air conditioning and auxiliary heater Superstructure: • High-quality frame construction made of rust- and corrosion-free materials • Fold-out steps for each side equipment compartment • Stainless-steel, individually customized equipment storage • Walkable, slip-resistant vehicle roof • Ladder mount, available with withdrawal aid upon request • Quick access to pump via a combination of roller shutter and rear flap, which also provides weather protection Vehicle pump/extinguishing agent tank: • Maintenance-free combined normal/high-pressure pump TITAN S40HP/FPN 4000-10 as per EN 1028 • Pump & Roll capable • Output 4,000 l/min at 10 bar and 400 l/min at 40 bar • Clearly arranged, intuitive pump controls • Additional information display for the operator • Fault-resistant external venting system • Integrated, infinitely adjustable foam mixing system • 5,000 l water tank with integrated 500 l foam agent tank • Additional heater in pump compartment Firefighting equipment: • High-pressure rapid intervention with 60 m form-stable hose • Roof-mounted foam/water monitor 2,400 l/min, also available as remote controlled • Additional front monitor available • Self-protection system with 4 spray nozzles in front of the wheels Safety and lighting: • LED lightbar on vehicle roof • LED front flashers • Pneumatic special signal system • 100 W loudspeaker system with PA functionality • Rear view camera • Comprehensive LED lighting in crew and all equipment spaces • LED scene lighting on superstructure and additional spotlights • Pneumatic LED light mast with remote control • Hygiene board available upon request We are happy to provide you with a detailed quotation and present the vehicle in detail. Note: All information has been provided to the best of our knowledge and belief, but without guarantee for completeness or accuracy. Images may show optional equipment. This is for information purposes only and does not constitute a binding offer. Subject to prior sale!