Used Corn Chopper for sale (239)

Condition: ready for operation (used), Year of construction: 2018, overall weight: 2,722 kg, controller manufacturer: MITSUBISHI, controller model: M800, number of axes: 5, This 5-axis Mitsubishi MV1200R was manufactured in 2018 and features advanced capabilities such as X-Axis Travel of 15.7", Y-Axis Travel of 11.8", and Z-Axis Travel of 8.7". It includes a Mitsubishi M800 control, Auto Wire Threading, and a Chiller for enhanced performance. If you are looking to get high-quality wire EDM capabilities, consider the Mitsubishi MV1200R machine we have for sale. Contact us for more information about this machine. Additional Equipment • Auto Wire Threading • Chiller • Remote 360 Installed • Round Diamond Guides Included • 1GB Partition • Wire Chopper • Angle Master Advanced Tapering • Angle Master Precision Taper Software • CFAST Compact Flash Card • Chiller Chopper • DNC Hardware Ethernet FTP • FS Power Supply • High Precision Alignment Gauge • Wire Alignment Gauge Included Lsdsx D Ryyjpfx Ad Norg Machine Benefits Technical machine benefits: • X-Axis Travel: 15.7" • Y-Axis Travel: 11.8" • Z-Axis Travel: 8.7" • U/V Axis Travel: 2.4" x 2.4" • Degree Taper Cutting: 15 @ 8" • Glass Scale Feedback: X, Y, U, V • Workpiece • Precision: .000002" • Table • Inside Tank Dimensions: 31.9" x 27.6"

Condition: used, Comprehensively tested and refurbished, used Kemutec Kek model 200 EC 316 Stainless Steel Jacketed Ribbon/ High Speed Mixer. Manufacturer: Kemutec Material: 316 Stainless steel Capacity: 200 litre working capacity. 215 litre total capacity (product dependent) Mixing trough: 565mm diameter X 860mm long. Ljdpfeyanxyox Ad Nsrg Discharge Type: Centre bottom discharge with manual plug type valve Type Of Blades: Cantilever design with bolted double ribbon mixing blade Motor: 7.5 kw 400 volt 3/50 & 480 volt 3/60 11460 rpm motor via David Brown Radicon gearbox rated 15.5/1 Revolutions Per Minute: 53RPM Also includes: Hinged lid and end cover. -Spare double ribbon and t-arm mixing blades. -Provision for chopper but none fitted. -Stainless steel jacket rated 4.4 bar design pressure at 154.83 degc. -Internal rated atmospheric pressure at 50 degC. -Mounted on mobile base. A video of this mixer is available below. Specifications: Capacity: 200 L Material of construction: 316 Stainless steel Width: 565 mm Horsepower: 7.5 kW Length: 860 mm Jacket: Yes Jacket Pressure: 4.4 bar

Condition: used, Comprehensively tested and refurbished, used Morton-Lödige model FKM600 stainless steel jacketed ploughshare type mixer. Ljdpfsyanxtjx Ad Norg Manufacturer: Morton Material: Stainless steel External Jacket: Stainless steel rated 5.5 Bar design pressure at 162 deg.c. Capacity: Approximately 150-450 litre working capacity, 600 litre total capacity (product dependent) Discharge Type: Bottom bomb door style with pneumatically operated door. Type Of Blades: Stainless steel shaft with Becker-shovel type blades Motor: 22kW motor with gearbox Also includes: Provision for (2) side entry choppers. (Not fitted).

Condition: new, functionality: fully functional, Year of construction: 2023, operating hours: 4 h, power: 45 kW (61.18 HP), Rotor lenght 1000 mm, knives 40 x 40 mm, 2 stator knives, kW 45+ 2.2, Weight approx 5000 kG, Hoppersize 1400 x 1000 mm, screensize on your request. PLC, automatic reverse as well by manual, connections for convayors, and included motor cover, etc, etc Optional Conveyor beld available This machine is plug and play and have Dutch CE certificat Conveyor or other infeed or discharge methods can be discussed. Any other wish you have, do not hessitate to ask. For more info: RSS Recycling Shredders & Solutions Lrodpfx Adjkzg U Do Nog Contacts or questions with companyname, telephone number and your name. Without these we are not able to reply your request

Condition: excellent (used), Year of construction: 2010, operating hours: 16,712 h, Sodick AG 400 L Premium in very good condition year of manufacture 2010-11 x, y, z 400 x 280 x 250 mm u, v 120 x 120 mm max. workpiece height 240 mm internal tank dimensions 866 x 626 mm max. workpiece weight 500 kg max. taper 25 degrees 0.1-0.3 mm wire can be used (0.25 mm installed) chiller wire chopper quick-clamping system smart grip automatic wire threading complete documentation many accessories machine is under power for inspection. Lrodpfx Aex Aix Eod Nsg

Condition: good (used), Brake module, brake unit, brake chopper, brake control module, brake rectifier -Manufacturer: SEW Eurodrive, brake control module -Type: BMV5.0 Lredpfjx T Ay Hsx Ad Njg -Input: 24V DC -Quantity: 1x brake module available -Dimensions: 75/25/H95 mm -Weight: 0.2 kg

Condition: used, breader suitable for standard and Japanese crumbs and corn flakes all stainless steel mobile adjustable speed Lrsdpfx Adjwdgiys Nsg belt width 900 mm with extra outfeed belt with air knives dimensions (l x w x h) : ± 3.200 x 1.800 x 2.200 mm 2,73 kW

Condition: used, Comprehensively tested, used stainless steel Aeromatic Fielder model GP1 VP mixer / granulator. Manufacturer: Aeromatic Material: Stainless Steel Capacity: 10 litres Type of Blades: Bottom entry 3-blade mixer with drive, and a side entry chopper. Lodpex Tib Rsfx Ad Norg Also includes: Jacketed removeable bowl and local controls. Various inserts to reduce bowl capacity. Unit is mounted on mobile base.

Condition: good (used), functionality: fully functional, Year of construction: 2012, Net wrap 9000 bales Without cutters Lrjdpfx Aeyalwmjd Neg

Condition: used, Year of construction: 1993, Manufacturer : Glatt Model : VG-25 Year : 1993 Type: Universal high shear granulator / mixer Capacity : 25 Litres Useful capacity: 5 - 18 Litres Empty weight: 450 Kg Compressed air: 6 - 10 bar Double jacket: yes Water pressure: 2 - 6 bar Main mixer: 30 - 600 rpm Power : 5,5 KW Chopper: 300 - 3000 rpm Power : 1,5 KW Ledpox S R H Eefx Ad Nsrg Variable speed drive: electric x2 Liquid spraying : Watson Marlow peristaltic pump Discharge valve: Manual Mobile chassis: 4 wheels Video :

Condition: excellent (used), Year of construction: 2023, operating hours: 1,400 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, With the following equipment: Ljdsx U Tkfjpfx Ad Nerg i-groove technology • Travel paths: 600 x 400 x 350 mm • 19" multitouch LCD screen • L-Cut (wire chopper) • 3D SetUp • integrated Jumbo Feeder 25 kg Warranty until 06/2026

Condition: used, mileage: 279,000 km, power: 360 kW (489.46 HP), first registration: 01/2023, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, total length: 5,990 mm, total width: 2,530 mm, total height: 3,960 mm, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, differential lock, electric window regulation, fog lights, fridge, parking heater, spoiler, = Additional options and equipment = - Aluminum fuel tank - Rear work lights - Front work lights - Roof spoiler - Differential lock - Remote central locking Lrjdpfjx Uq U Iex Ad Nsg - Windscreen - Speed limiter - Tipping hydraulics - Radio/CD player - Sleeper cab - Side skirts - Sun visor - Stability control - Parking heater - Pre-heating system - Xenon lighting - Power Take-Off (PTO) = Further information = Maximum front axle load: 8,000 kg Rear axle: Differential lock; Max. axle load: 11,500 kg Number of cylinders: 6 Engine displacement: 12,777 cc Unladen weight: 8,355 kg Payload: 12,645 kg Gross vehicle weight (GVW): 21,000 kg Please contact Bastien Begemann or Corne Visser for further information.

Condition: used, Manufacturer: WAM Model: WBH550 Type: Ploughshare mixer Total volume: 550L Capacity: 155 - 385 L Material: stainless steel Main motor power: 9.2 kW ATEX tulip-shaped chopper: 3 kW Bearing seal: air purge Ledpfx Aox R D Imed Nerg Filter support Bag emptying hopper Drain valve: pneumatic Secondary drain valve: manual Electrical cabinet with speed variation Dismantled platform available with equipment including: mixer support, platform, and stairs.

Condition: used, Year of construction: 2016, // Equipment dismantled and stored in our warehouse // Lredjx R D Efepfx Ad Neg Manufacturer: Italvacuum Model: Cosmodry System IHD 3200 Year: 2016 Type: horizontal vacuum paddle dryer Application: drying wet powders ATEX (Eex) unit: yes Industries: Fine chemicals, pharmaceuticals (API), intermediates A) Agitation: Concentric agitator with heated shaft, removable in several segments (double mechanical seal) Transmission: (CEMP) - Power 30 kW + Gearbox + Chain Agitation speed: 1.6 ÷ 8.1 rpm Atex: explosion-proof ATEX II 2GD Mounted with the dryer on a support structure (single SKID) B) Drying chamber with discharge valve Total volume : 3200 Liters Useful volume : 30% - 80% Internal pressure : -1 / 0,5 barg Jacket pressure : 0 / 1,7 barg Project temperature : -10 / +130°C Maximum heating fluid temperature: +100°C Best vacuum tightness: 4 mbar/h EX-I absolute pressure transmitter PT100 Ex-i product temperature sensor Nitrogen backwash system Rotary chopper speed: 300 / 1200 rpm (not installed) Material in contact with the product: AISI 316L - EN 1.4404 Vacuum seals: PTFE and FEP Jacket material: AISI 304 - EN 1.4301 Heating fluid: Diathermic oil Mirror-polished interior finish (Ra ≤ 0.4 µm) Satin exterior finish (Ra ≤ 1.2 µm) Inspection and Shut-off Valve DN.1650 Buffer Relief Valve DN 200/300 DN 250 Butterfly Loading Valve Prepared for the installation of two choppers (lateral knives) C) Process filter D) Vacuum unit: SAURUS939 piston vacuum pump, model VVDPump support benchATEX: Ex-d-IIB-T4 – IP55Power: 11 kWAtmospheric pressure surface condenser, model VD200I E) Vacuum condensing unit - AISI 316L stainless steel with double cooling jacket in AISI 304 stainless steel. Internal design pressure: -1 / 0.5 barg Jacket design pressure: 0 / 3 barg Design temperature: -10 / 40 °C Maximum cooling liquid pressure: 2.5 bar Exchange surface area: 8.5 m2 Condensate collection capacity: 900 litres Level sensor F) External safety filter G) Temperature control system: Heating/Cooling Steam liquid heater: Pressure 7 bar - Jacket temperature: 142°C - Surface area: 1.65 m2 Cooler, mounted on the heater: cold water or brine - Pipe jacket pressure: 12 barg - Jacket temperature: 142°C - Pipe temperature: -10°C /+ 99°C - Surface area: 3.42 m2 H) Command and Control System (Electrical Cabinet + HMI) Complete technical file

Condition: used, Year of construction: 1997, Manufacturer : Aeromatic TK Fielder (GEA) Model: Pharma Matrix 150 Year : 1997   Type : Granulator / high speed mixer Application : Granulation Sector : Pharmaceutical / Chemical / Cosmetics   Material : stainless steel Tank volume : 150 L Jacket : 2 bars / 80°C max Main agitation : 130 - 260 rpm Power : 11 KW Variable speed drive: electric Chopper / granulation: 1500 / 3000 rpm CIP self-cleaning: seals and tank GMP: Good manufacturing practice : safety / contamination CASTELL safety key Lrjdox R Dbmspfx Ad Nog Discharge valve: pneumatic Bag filter Primary sealing: inflatable seal Secondary seal: compressed air purge Compressed air: 6 bars Electrical cabinet Video available in operation Digital documentation

Condition: used, Used Zanchetta model Rotolab stainless steel mixer granulator. Total bowl capacity 2.8 litre, working capacity approx. 1.6 litre. Has jacketed bowl with inside dimensions 160 mm diameter x 140 mm height. Main impeller rotation speed 120 - 1200 rpm driven by electric motor. Chopper blade rotation speed 6000 rpm driven by electric motor. Includes local control panel and integrated switchboard, connection for vacuum and nitrogen (.). Lsdpfxjx Ryupo Ad Nsrg

Condition: used, Comprehensively tested and refurbished, used Winkworth model RT400 316 stainless steel high speed ploughshare mixer. Material: Stainless steel Capacity: 400 litre (product dependent) Mixing trough: 1,300mm long x 800mm diameter Discharge Type: Centre bottom pneumatically operated flap discharge value Type Of Blades: Ploughshare blades Motor: 11kw, 380-415 volt, 3/50, 1450-1460rpm motor through Custom Power Transmission gearbox type MO820 Revolutions Per Minute: 99rpm Also includes: (1) stainless steel side entry chopper driven by 4kw, 380-415volt, 2840-2870rpm, 3/50 motor. A video of this mixer is available below. Specifications: Lodpfsx Rytrex Ad Nerg Bowl Volume: 105 gal Motor Power: 11 kW Material Of Construction: Stainless Steel Choppers (Y/N): Y Number Of Choppers (1-10): 1 Horsepower Of Choppers: 4kW RPM Of Choppers: 2840 - 2870 HP Of Unit: 11kW Revolutions Per Minute: 1450 - 1460 Vacuum Internal (Y/N): N Jacket (Y/N): N Jacket Pressure: N/A Jacket Temperature: N/A Weight: N/A Dimensions: 1,300mm long x 800mm diameter

Condition: used, Comprehensively tested, used WINKWORTH model RT80 stainless steel jacketed high speed mixer. Manufacturer: Winkworth Model: RT80 Material: Stainless Steel Lrsdpfx Adex Ryq Do Nog Capacity: 120 litre, working capacity 80 litre Agitation: Shaft equipped with 4 mixing blades driven by 7.5 kw, Hp 10, Rpm 30/150, 380 volt motor. Stainless steel chopper driven by 5.7/4.7 kW, 50Hz, 2900/1450 rpm, 380-415 V Also includes: Stainless steel jacket rated 3.5 bar at 200 DegC, 2000 watt hot water heating skid. Local controls. Specifications: Bowl Volume: 31.7 gal Motor Power: 7.5 kW Material Of Construction: Stainless Steel Choppers (Y/N): Y Number Of Choppers (1-10): 1 Horsepower Of Choppers: 4.7 - 5.7 kW RPM Of Choppers: 1450 - 2900 HP Of Unit: 7.5kW Revolutions Per Minute: 30 - 150 Vacuum Internal (Y/N): N Jacket (Y/N): Y Jacket Pressure: 3.5 Bar Jacket Temperature: 200 Deg.C.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 483, Casemaker, Automatic production of book cases, files, display cards, calendar backs, game boards or luxury packaging. Co-Pilot with touchscreen, Automatic case counter, Board magazine for manual loading, Centre strip infeed (flexible), Waste chopper, Cloth feeder, Glue unit, Preheated glue tube, Viscosity control, Device for inside lining with hotmelt, Device for producing padded cases, Pressing station, Tacking delivery. Lrjdpfjx Ryr Iex Ad Njg

Condition: used, Comprehensively tested and refurbished, Used Winkworth model RT200 stainless steel high speed ploughshare (T-Arm) mixer. Manufacturer: Winkworth Material: Stainless Steel Capacity: Approximately 200 Litre Capacity Mixing chamber: Approximately 1,000mm x 650mm Diameter Discharge Type: Centre Bottom with Discharge Valve Lsdpfsx Rylnjx Ad Njrg Type Of Mixer: T-Arm Blades Motor: 11kW SEW Geared Motor Also includes: Stainless Steel Side Entry Chopper Driven by 4kW Motor. Tote lifter (Max 150 kg) and 2 off stainless steel totes. Click on the link below to see a video of the machine running. Specifications: Bowl Volume: 52.8 gal Motor Power: 14.8 hp Material Of Construction: Stainless Steel Choppers (Y/N): Y Number Of Choppers (1-10): 1 Horsepower Of Choppers: 5.362 HP Of Unit: 14.751 Weight: 150 Dimensions: 1000mm x 650mm Diameter

Condition: used, Cutting sieve, shredder sieve, sieve basket, sieve for chopper, shredder system, single-shaft shredder, shredder, granulator, shredding machine -Perforation: 65 x 65 mm -Recording holes: Ø 75/30 mm -with supporting ribs -Drawing with the pictures -Dimensions: 1600/1844/H620 mm -Weight: 696 kg Lrjdpfxob Hiylj Ad Njg

Condition: good (used), Cutter knife, cutter knife for chop chopper, chop cutter, dicer, multi-purpose cutter, slicer and portion cutter -Manufacturer: Knecht, cutter knife 2 pieces -Type: R320 5 220 428 92 Lrsdpfx Asvwlxhsd Nog -Price/Delivery: complete -Transport dimensions: 370/230/H40 mm -Weight: 2.8 kg

Condition: good (used), Cutter knife, cutter knife for chop chopper, chop cutter, dicer, multi-purpose cutter, slice and portion cutter, -Manufacturer: Holac, cutter knife -Type: 29-0228-0/1 -Hole: Square 26 x 26 mm -Quantity: 1x knife. available -Dimensions: 540/350/H65 mm -Weight: 4.4 kg Lodsvwlzijpfx Ad Njrg

Condition: good (used), Cutter knife, cutter knife for chop chopper, chop cutter, dicer, multi-purpose cutter, slicer and portion cutter -Manufacturer: Knecht, cutter knives 4 pieces -Type: R320 5 220 428 92 -Price/Delivery: complete -Dimensions: 330/300/H80 mm Lredpfxovwll Io Ad Njg -Total weight: 5.6 kg

Condition: good (used), Brake module, brake unit, brake chopper -Manufacturer: Lenze, brake module type EMB8253-E -Input: DC 725V Imax = 15A -Output: Pav = 5.6 kW Ppk = 11.2 kW -Number: 5x converters available -Price: per piece -Dimensions: 210/50/H170 mm Ljdpfjh Rn U Tjx Ad Norg -Weight: 1.1 kg/pc.